Showing 1–50 of 257 results for author: Novoselov, K

Anisotropic van der Waals Crystal with High Refractive Index and Transparency for UV-Visible Range Applications

Authors: Aleksandr Slavich, Georgy Ermolaev, Ilya Zavidovskiy, Dmitriy Grudinin, Konstantin Kravtsov, Mikhail Tatmyshevskiy, Mikhail Mironov, Adilet Toksumakov, Gleb Tselikov, Ilia Fradkin, Kirill Voronin, Maksim Povolotskiy, Olga Matveeva, Alexander Syuy, Dmitry Yakubovsky, Dmitry Tsymbarenko, Ivan Kruglov, Davit Ghazaryan, Sergey Novikov, Andrey Vyshnevyy, Aleksey Arsenin, Valentyn Volkov, Kostya Novoselov

Abstract: Thanks to their record high refractive index and giant optical anisotropy, van der Waals (vdW) materials have accelerated the development of nanophotonics. However, traditional high refractive index materials, such as titanium dioxide (TiO2), still dominate in the most important visible range. This is due to the current lack of transparent vdW materials across the entire visible spectrum. In this… ▽ More Thanks to their record high refractive index and giant optical anisotropy, van der Waals (vdW) materials have accelerated the development of nanophotonics. However, traditional high refractive index materials, such as titanium dioxide (TiO2), still dominate in the most important visible range. This is due to the current lack of transparent vdW materials across the entire visible spectrum. In this context, we propose that germanium disulfide (GeS2) could offer a significant breakthrough. With its high refractive index, negligible losses, and biaxial optical anisotropy across the whole visible range, GeS2 has the potential to complement TiO2 and close the application gap of vdW materials in the visible spectrum. The addition of GeS2 could have a profound impact on the design of van der Waals nanophotonic circuits for any operation wavelength from ultraviolet to infrared, emphasizing the significance of the potential impact of GeS2 on the field of nanophotonics. △ Less

Submitted 11 October, 2024; originally announced October 2024.

Comments: 15 pages, 4 figures

Substrate-aware computational design of two-dimensional materials

Authors: Arslan Mazitov, Ivan Kruglov, Alexey V. Yanilkin, Aleksey V. Arsenin, Valentyn S. Volkov, Dmitry G. Kvashnin, Artem R. Oganov, Kostya S. Novoselov

Abstract: Two-dimensional materials have attracted considerable attention due to their remarkable electronic, mechanical and optical properties, making them prime candidates for next-generation electronic and optoelectronic applications. Despite their widespread use in combination with substrates in practical applications, including the fabrication process and final device assembly, computational studies of… ▽ More Two-dimensional materials have attracted considerable attention due to their remarkable electronic, mechanical and optical properties, making them prime candidates for next-generation electronic and optoelectronic applications. Despite their widespread use in combination with substrates in practical applications, including the fabrication process and final device assembly, computational studies often neglect the effects of substrate interactions for simplicity. This study presents a novel method for predicting the atomic structure of 2D materials on arbitrary substrates by combining an evolutionary algorithm, a lattice-matching technique, an automated machine learning interatomic potentials training protocol, and the ab initio thermodynamics approach for predicting the possible conditions of experimental synthesis of the predicted 2D structures. Using the Mo-S system on a c-cut sapphire substrate as a case study, we reveal several new stable and metastable structures, including previously known 1H-MoS2 and newly found Pmma Mo3S2, P-1 Mo2S, P21m Mo5S3, and P4mm Mo4S, where the Mo4S structure is specifically stabilized by interaction with the substrate. Electronic band structure calculations of Mo3S2, Mo2S, Mo5S3, and Mo4S showed their metallic behavior, while phonon properties calculations indicated their dynamic stability and substrate-induced modulation of the phonon density of states. Finally, we use the ab initio thermodynamics approach to predict the synthesis conditions of the discovered structures in the parameter space of the commonly used CVD technique. These results provide insights into computational substrate engineering, allowing one to study the substrate effect on the thermodynamic and dynamical stability of 2D materials and to modulate their electronic and phonon properties for their future applications, as well as to provide guide maps for their experimental synthesis. △ Less

Submitted 16 August, 2024; originally announced August 2024.

Nanopatterning of multicomponent van der Waals heterostructures using atomic force microscopy

Authors: A. L. Shilov, L. Elesin, A. Grebenko, V. I. Kleshch, M. A. Kashchenko, I. Mazurenko, E. Titova, E. Zharkova, D. S. Yakovlev, K. S. Novoselov, D. A. Ghazaryan, V. Dremov, D. A. Bandurin

Abstract: Multilayer van der Waals (vdW) heterostructures have become an important platform in which to study novel fundamental effects emerging at the nanoscale. Standard nanopatterning techniques relying on electron-beam lithography and reactive ion etching, widely applied to pattern such heterostructures, however, impose some limitations on the edge accuracy and resolution, as revealed through numerous e… ▽ More Multilayer van der Waals (vdW) heterostructures have become an important platform in which to study novel fundamental effects emerging at the nanoscale. Standard nanopatterning techniques relying on electron-beam lithography and reactive ion etching, widely applied to pattern such heterostructures, however, impose some limitations on the edge accuracy and resolution, as revealed through numerous experiments with vdW quantum dots and point contacts. Here we present an alternative approach for electrode-free nanopatterning of thick multilayer vdW heterostructures based on atomic force microscopy (AFM). By applying an AC voltage of a relatively small frequency (1-10 kHz) between the sharp platinum tip and the substrate, we realize high-resolution ($\lesssim 100$ nm) etching of thick multicomponent heterostructures if the latter are deposited onto graphite slabs. Importantly, unlike more conventional electrode-free local anodic oxidation, our method does not require a special environment with excess humidity, can be applied at ambient conditions, and enables the patterning of multilayer heterostructures composed of graphene, graphite, hexagonal boron nitride (hBN), NbSe$_{2}$, WSe$_{2}$, and more. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Comments: 6 pages; 3 figures

Strongly coupled magneto-exciton condensates in large-angle twisted double bilayer graphene

Authors: Qingxin Li, Yiwei Chen, LingNan Wei, Hong Chen, Yan Huang, Yujian Zhu, Wang Zhu, Dongdong An, Junwei Song, Qikang Gan, Qi Zhang, Kenji Watanabe, Takashi Taniguchi, Xiaoyang Shi, Kostya S. Novoselov, Rui Wang, Geliang Yu, Lei Wang

Abstract: Excitons, the bosonic quasiparticle emerging from Coulomb interaction between electrons and holes, will undergo a Bose-Einstein condensation(BEC) and transition into a superfluid state with global phase coherence at low temperatures. An important platform to study such excitonic physics is built on double-layer quantum wells or recent two-dimensional material heterostructures, where two parallel p… ▽ More Excitons, the bosonic quasiparticle emerging from Coulomb interaction between electrons and holes, will undergo a Bose-Einstein condensation(BEC) and transition into a superfluid state with global phase coherence at low temperatures. An important platform to study such excitonic physics is built on double-layer quantum wells or recent two-dimensional material heterostructures, where two parallel planes of electrons and holes are separated by a thin insulating layer. Lowering this separation distance ($d$) enhances the interlayer Coulomb interaction thereby strengthens the exciton binding energy. However, an exceedingly small $d$ will lead to the undesired interlayer tunneling, which results the annihilation of excitons. Here, we report the observation of a sequences of robust exciton condensates(ECs) in double bilayer graphenes twisted to $\sim 10^\circ$ with no insulating mid-layer. The large momentum mismatch between the two graphene layers well suppress the interlayer tunneling, allowing us to reach the separation lower limit $\sim$ 0.334 nm and investigate ECs in the extreme coupling regime. Carrying out transport measurements on the bulk and edge of the devices, we find incompressible states corresponding to ECs when both layers are half-filled in the $N=0$ and $N=1$ Landau levels (LLs). The comparison between these ECs and theoretical calculations suggest that the low-energy charged excitation of ECs can be meron-antimeron or particle-hole pair, which relies on both LL index and carrier type. Our results establish large-angle twisted bilayers as an experimental platform with extreme coupling strength for studying quantum bosonic phase and its low-energy excitations. △ Less

Submitted 19 May, 2024; originally announced May 2024.

Blood Works for Graphene Production

Authors: Xiaofan Cai, Ming Li, Chao Chen, Renjun Du, Zijing Guo, Ping Wang, Guodong Ma, Xinglong Wu, Zhiyuan Wang, Yaqing Han, Fuzhuo Lian, Jingkuan Xiao, Siqi Jiang, Lei Wang, Alexander S. Mayorov, Libo Gao, Kostya S. Novoselov, Geliang Yu

Abstract: Blood, a ubiquitous and fundamental carbohydrate material composed of plasma, red blood cells, white blood cells, and platelets, has been playing an important role in biology, life science, history, and religious study, while graphene has garnered significant attention due to its exceptional properties and extensive range of potential applications. Achieving environmentally friendly, cost-effectiv… ▽ More Blood, a ubiquitous and fundamental carbohydrate material composed of plasma, red blood cells, white blood cells, and platelets, has been playing an important role in biology, life science, history, and religious study, while graphene has garnered significant attention due to its exceptional properties and extensive range of potential applications. Achieving environmentally friendly, cost-effective growth using hybrid precursors and obtaining high-quality graphene through a straightforward CVD process has been traditionally considered mutually exclusive. This study demonstrates that we can produce high-quality graphene domains with controlled thickness through a one-step growth process at atmospheric pressure using blood as a precursor. Raman spectroscopy confirms the uniformity of the blood-grown graphene films, and observing the half-integer quantum Hall effect in the measured devices highlights its outstanding electronic properties. This unprecedented approach opens possibilities for blood application, facilitating an unconventional route in graphene growth applications. △ Less

Submitted 27 April, 2024; originally announced April 2024.

Anomalous terahertz photoconductivity caused by the superballistic flow of hydrodynamic electrons in graphene

Authors: M. Kravtsov, A. L. Shilov, Y. Yang, T. Pryadilin, M. A. Kashchenko, O. Popova, M. Titova, D. Voropaev, Y. Wang, K. Shein, I. Gayduchenko, G. N. Goltsman, M. Lukianov, A. Kudriashov, T. Taniguchi, K. Watanabe, D. A. Svintsov, A. Principi, S. Adam, K. S. Novoselov, D. A. Bandurin

Abstract: Light incident upon materials can induce changes in their electrical conductivity, a phenomenon referred to as photoresistance. In semiconductors, the photoresistance is negative, as light-induced promotion of electrons across the band gap enhances the number of charge carriers participating in transport. In superconductors, the photoresistance is positive because of the destruction of the superco… ▽ More Light incident upon materials can induce changes in their electrical conductivity, a phenomenon referred to as photoresistance. In semiconductors, the photoresistance is negative, as light-induced promotion of electrons across the band gap enhances the number of charge carriers participating in transport. In superconductors, the photoresistance is positive because of the destruction of the superconducting state, whereas in normal metals it is vanishing. Here we report a qualitative deviation from the standard behavior in metallic graphene. We show that Dirac electrons exposed to continuous wave (CW) terahertz (THz) radiation can be thermally decoupled from the lattice by 50~K which activates hydrodynamic electron transport. In this regime, the resistance of graphene constrictions experiences a decrease caused by the THz-driven superballistic flow of correlated electrons. We analyze the dependencies of the negative photoresistance on the carrier density, and the radiation power and show that our superballistic devices operate as sensitive phonon-cooled bolometers and can thus offer a picosecond-scale response time. Beyond their fundamental implications, our findings underscore the practicality of electron hydrodynamics in designing ultra-fast THz sensors and electron thermometers. △ Less

Submitted 29 March, 2024; v1 submitted 27 March, 2024; originally announced March 2024.

Comments: 7 pages, 3 figures

Single Electron Quantum Dot in Two-Dimensional Transition Metal Dichalcogenides

Authors: Jarosław Pawłowski, Pankaj Kumar, Kenji Watanabe, Takashi Taniguchi, Konstantin S. Novoselov, Hugh O. H. Churchill, Dharmraj Kotekar-Patil

Abstract: Spin-valley properties in two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDC) has attracted significant interest due to the possible applications in quantum computing. Spin-valley properties can be exploited in TMDC quantum dot (QD) with well-resolved energy levels. This requires smaller QDs, especially in material systems with heavy carrier effective mass e.g. TMDCs and si… ▽ More Spin-valley properties in two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDC) has attracted significant interest due to the possible applications in quantum computing. Spin-valley properties can be exploited in TMDC quantum dot (QD) with well-resolved energy levels. This requires smaller QDs, especially in material systems with heavy carrier effective mass e.g. TMDCs and silicon. Device architectures employed for TMDC QDs so far have difficulty achieving smaller QDs. Therefore, an alternative approach in the device architecture is needed. Here, we propose a multilayer device architecture to achieve a gate-defined QD in TMDC with a relatively large energy splitting on the QD. We provide a range of device dimensions and dielectric thicknesses and its correlation with the QD energy splitting. The device architecture is modeled realistically. Moreover, we show that all the device parameters used in modeling are experimentally achievable. These studies lay the foundation for future work toward spin-valley qubits in TMDCs. The successful implementation of these device architectures will drive the technological development of 2D materials-based quantum technologies. △ Less

Submitted 1 March, 2024; v1 submitted 29 February, 2024; originally announced February 2024.

Comments: main text: 20 pages, 5 figures; supplementary: 9 pages, 7 figures

Superconductivity in atomically thin films: 2D critical state model

Authors: Filippo Gaggioli, Gianni Blatter, Kostya S. Novoselov, Vadim B. Geshkenbein

Abstract: The comprehensive understanding of superconductivity is a multi-scale task that involves several levels, starting from the electronic scale determining the microscopic mechanism, going to the phenomenological scale describing vortices and the continuum-elastic scale describing vortex matter, to the macroscopic scale relevant in technological applications. The prime example for such a macro-phenome… ▽ More The comprehensive understanding of superconductivity is a multi-scale task that involves several levels, starting from the electronic scale determining the microscopic mechanism, going to the phenomenological scale describing vortices and the continuum-elastic scale describing vortex matter, to the macroscopic scale relevant in technological applications. The prime example for such a macro-phenomenological description is the Bean model that is hugely successful in describing the magnetic and transport properties of bulk superconducting devices. Motivated by the development of novel devices based on superconductivity in atomically thin films, such as twisted-layer graphene, here, we present a simple macro-phenomenological description of the critical state in such two-dimensional (2D) thin films. While transverse screening and demagnetization can be neglected in these systems, thereby simplifying the task in comparison with usual film- and platelet shaped samples, surface and bulk pinning are important elements to be included. We use our 2D critical state model to describe the transport and magnetic properties of 2D thin-film devices, including the phenomenon of non-reciprocal transport in devices with asymmetric boundaries and the superconducting diode effect. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Open-orbit induced low field extremely large magnetoresistance in graphene/h-BN superlattices

Authors: Zihao Wang, Pablo M. Perez-Piskunow, Calvin Pei Yu Wong, Matthew Holwill, Jiawei Liu, Wei Fu, Junxiong Hu, T Taniguchi, K Watanabe, Ariando Ariando, Lin Li, Kuan Eng Johnson Goh, Stephan Roche, Jeil Jung, Konstantin Novoselov, Nicolas Leconte

Abstract: We report intriguing and hitherto overlooked low-field room temperature extremely large magnetoresistance (XMR) patterns in graphene/hexagonal boron nitride (h-BN) superlattices that emerge due to the existence of open orbits within each miniband. This finding is set against the backdrop of the experimental discovery of the Hofstadter butterfly in moir superlattices, which has sparked considerable… ▽ More We report intriguing and hitherto overlooked low-field room temperature extremely large magnetoresistance (XMR) patterns in graphene/hexagonal boron nitride (h-BN) superlattices that emerge due to the existence of open orbits within each miniband. This finding is set against the backdrop of the experimental discovery of the Hofstadter butterfly in moir superlattices, which has sparked considerable interest in the fractal quantum Hall regime. To cope with the challenge of deciphering the low magnetic field dynamics of moir minibands, we utilize a novel semi-classical calculation method, grounded in zero-field Fermi contours, to predict the nontrivial behavior of the Landau-level spectrum. This is compared with fully quantum simulations, enabling an in-depth and contrasted analysis of transport measurements in high-quality graphene-hBN superlattices. Our results not only highlight the primary observation of the open-orbit induced XMR in this system but also shed new light on other intricate phenomena. These include the nuances of single miniband dynamics, evident through Lifshitz transitions, and the complex interplay of semiclassical and quantum effects between these minibands. Specifically, we document transport anomalies linked to trigonal warping, a semiclassical deviation from the expected linear characteristics of Landau levels, and magnetic breakdown phenomena indicative of quantum tunneling, all effects jointly contributing to the intricacies of a rich electronic landscape uncovered at low magnetic fields. △ Less

Submitted 12 December, 2023; originally announced December 2023.

Comments: 5 figures

Infrared photodetection in graphene-based heterostructures: bolometric and thermoelectric effects at the tunneling barrier

Authors: Dmitry A. Mylnikov, Mikhail A. Kashchenko, Kirill N. Kapralov, Davit A. Ghazaryan, Evgenii E. Vdovin, Sergey V. Morozov, Kostya S. Novoselov, Denis A. Bandurin, Alexander I. Chernov, Dmitry A. Svintsov

Abstract: Graphene/hBN/graphene tunnel devices offer promise as sensitive mid-infrared photodetectors but the microscopic origin underlying the photoresponse in them remains elusive. In this work, we investigated the photocurrent generation in graphene/hBN/graphene tunnel structures with localized defect states under mid-IR illumination. We demonstrate that the photocurrent in these devices is proportional… ▽ More Graphene/hBN/graphene tunnel devices offer promise as sensitive mid-infrared photodetectors but the microscopic origin underlying the photoresponse in them remains elusive. In this work, we investigated the photocurrent generation in graphene/hBN/graphene tunnel structures with localized defect states under mid-IR illumination. We demonstrate that the photocurrent in these devices is proportional to the second derivative of the tunnel current with respect to the bias voltage, peaking during tunneling through the hBN impurity level. We revealed that the origin of the photocurrent generation lies in the change of the tunneling probability upon radiation-induced electron heating in graphene layers, in agreement with the theoretical model that we developed. Finally, we show that at a finite bias voltage, the photocurrent is proportional to the either of the graphene layers heating under the illumination, while at zero bias, it is proportional to the heating difference. Thus, the photocurrent in such devices can be used for accurate measurements of the electronic temperature providing a convenient alternative to Johnson noise thermometry. △ Less

Submitted 9 December, 2023; originally announced December 2023.

Fundamental limits of few-layer NbSe$_2$ microbolometers at terahertz frequencies

Authors: K. Shein, E. Zharkova, M. A. Kashchenko, A. I. Kolbatova, A. Lyubchak, L. Elesin, E. Nguyen, A. Semenov, I. Charaev, A. Schilling, G. N. Goltsman, K. S. Novoselov, I. Gayduchenko, D. A. Bandurin

Abstract: The rapid development of infrared spectroscopy, observational astronomy, and scanning near-field microscopy has been enabled by the emergence of sensitive mid- and far-infrared photodetectors. Owing to their exceptional signal-to-noise ratio and fast photoresponse, superconducting hot-electron bolometers (HEBs) have become a critical component in these applications. While superconducting HEBs are… ▽ More The rapid development of infrared spectroscopy, observational astronomy, and scanning near-field microscopy has been enabled by the emergence of sensitive mid- and far-infrared photodetectors. Owing to their exceptional signal-to-noise ratio and fast photoresponse, superconducting hot-electron bolometers (HEBs) have become a critical component in these applications. While superconducting HEBs are traditionally made from sputtered superconducting thin films like Nb or NbN, the potential of layered van der Waals (vdW) superconductors is untapped at THz frequencies. Here, we report the fabrication of superconducting HEBs out of few-layer NbSe$_2$ microwires. By improving the interface between NbSe$_2$ and metal leads connected to a broadband antenna, we overcome the impedance mismatch between this vdW superconductor and the radio frequency (RF) readout circuitry that allowed us to achieve large responsivity THz detection over the range from 0.13 to 2.5 THz with minimum noise equivalent power of 7~pW$\sqrt{Hz}$. Using the heterodyne sub-THz mixing technique, we reveal that NbSe$_2$ superconducting HEBs are relatively fast and feature a characteristic response time in the nanosecond range limited by the slow heat escape to the bath through a SiO$_2$ layer, on which they are assembled, in agreement with energy relaxation model. Our work expands the family of materials for superconducting HEBs technology, reveals NbSe$_2$ as a promising platform, and offers a reliable protocol for the in-lab production of custom bolometers using the vdW assembly technique. △ Less

Submitted 21 November, 2023; originally announced November 2023.

Journal ref: Nano Letter 24, 7, 2282 - 2288, 2024

High-mobility compensated semimetals, orbital magnetization, and umklapp scattering in bilayer graphene moire superlattices

Authors: A. L. Shilov, M. A. Kashchenko, P. A. Pantaleón, M. Kravtsov, A. Kudriashov, Z. Zhan, T. Taniguchi, K. Watanabe, S. Slizovskiy, K. S. Novoselov, V. I. Fal'ko, F. Guinea, D. A. Bandurin

Abstract: Twist-controlled moire superlattices (MS) have emerged as a versatile platform in which to realize artificial systems with complex electronic spectra. Bernal-stacked bilayer graphene (BLG) and hexagonal boron nitride (hBN) form an interesting example of the MS that has recently featured a set of unexpected behaviors, such as unconventional ferroelectricity and electronic ratchet effect. Yet, the u… ▽ More Twist-controlled moire superlattices (MS) have emerged as a versatile platform in which to realize artificial systems with complex electronic spectra. Bernal-stacked bilayer graphene (BLG) and hexagonal boron nitride (hBN) form an interesting example of the MS that has recently featured a set of unexpected behaviors, such as unconventional ferroelectricity and electronic ratchet effect. Yet, the understanding of the BLG/hBN MS electronic properties has, at present, remained fairly limited. Here we develop a multi-messenger approach that combines standard magnetotransport techniques with low-energy sub-THz excitation to get insights into the properties of this MS. We show that BLG/hBN lattice alignment results in the emergence of compensated semimetals at some integer fillings of the moire bands separated by van Hove singularities where Lifshitz transition occurs. A particularly pronounced semimetal develops when 8 electrons reside in the moire unit cell, where coexisting high-mobility electron and hole systems feature a strong magnetoresistance reaching 2350 % already at B=0.25 T. Next, by measuring the THz-driven Nernst effect in remote bands, we observe valley splitting, pointing to an orbital magnetization characterized by a strongly enhanced effective g-factor of 340. Last, using THz photoresistance measurements, we show that the high-temperature conductivity of the BLG/hBN MS is limited by electron-electron umklapp processes. Our multi-facet analysis introduces THz-driven magnetotransport as a convenient tool to probe the band structure and interaction effects in vdW materials and provides a comprehension of the BLG/hBN MS. △ Less

Submitted 8 November, 2023; originally announced November 2023.

Comments: 9 pages, 4 figures

Journal ref: ACS Nano 2024

Chiral photonic super-crystals based on helical van der Waals homostructures

Authors: Kirill V. Voronin, Adilet N. Toksumakov, Georgy A. Ermolaev, Aleksandr S. Slavich, Mikhail K. Tatmyshevskiy, Sergey V. Novikov, Andrey A. Vyshnevy, Aleksey V. Arsenin, Kostya S. Novoselov, Davit A. Ghazaryan, Valentyn S. Volkov, Denis G. Baranov

Abstract: Chirality is probably the most mysterious among all symmetry transformations. Very readily broken in biological systems, it is practically absent in naturally occurring inorganic materials and is very challenging to create artificially. Chiral optical wavefronts are often used for the identification, control and discrimination of left- and right-handed biological and other molecules. Thus, it is c… ▽ More Chirality is probably the most mysterious among all symmetry transformations. Very readily broken in biological systems, it is practically absent in naturally occurring inorganic materials and is very challenging to create artificially. Chiral optical wavefronts are often used for the identification, control and discrimination of left- and right-handed biological and other molecules. Thus, it is crucially important to create materials capable of chiral interaction with light, which would allow one to assign arbitrary chiral properties to a light field. In this paper, we utilized van der Waals technology to assemble helical homostructures with chiral properties (e. g. circular dichroism). Because of the large range of van der Waals materials available such helical homostructures can be assigned with very flexible optical properties. We demonstrate our approach by creating helical homostructures based on multilayer As$_2$S$_3$, which offers the most pronounced chiral properties even in thin structures due to its strong biaxial optically anisotropy. Our work showcases that the chirality of an electromagnetic system may emerge at an intermediate level between the molecular and the mesoscopic one due to the tailored arrangement of non-chiral layers of van der Waals crystals and without additional patterning. △ Less

Submitted 28 September, 2023; originally announced September 2023.

Resonant band hybridization in alloyed transition metal dichalcogenide heterobilayers

Authors: Alessandro Catanzaro, Armando Genco, Charalambos Louca, David A. Ruiz-Tijerina, Daniel J. Gillard, Luca Sortino, Aleksey Kozikov, Evgeny M. Alexeev, Riccardo Pisoni, Lee Hague, Kenji Watanabe, Takashi Taniguchi, Klauss Ensslin, Kostya S. Novoselov, Vladimir Fal'ko, Alexander I. Tartakovskii

Abstract: Bandstructure engineering using alloying is widely utilised for achieving optimised performance in modern semiconductor devices. While alloying has been studied in monolayer transition metal dichalcogenides, its application in van der Waals heterostructures built from atomically thin layers is largely unexplored. Here, we fabricate heterobilayers made from monolayers of WSe$_2$ (or MoSe$_2$) and M… ▽ More Bandstructure engineering using alloying is widely utilised for achieving optimised performance in modern semiconductor devices. While alloying has been studied in monolayer transition metal dichalcogenides, its application in van der Waals heterostructures built from atomically thin layers is largely unexplored. Here, we fabricate heterobilayers made from monolayers of WSe$_2$ (or MoSe$_2$) and Mo$_x$W$_{1-x}$Se$_2$ alloy and observe nontrivial tuning of the resultant bandstructure as a function of concentration $x$. We monitor this evolution by measuring the energy of photoluminescence (PL) of the interlayer exciton (IX) composed of an electron and hole residing in different monolayers. In Mo$_x$W$_{1-x}$Se$_2$/WSe$_2$, we observe a strong IX energy shift of $\approx$100 meV for $x$ varied from 1 to 0.6. However, for $x<0.6$ this shift saturates and the IX PL energy asymptotically approaches that of the indirect bandgap in bilayer WSe$_2$. We theoretically interpret this observation as the strong variation of the conduction band K valley for $x>0.6$, with IX PL arising from the K-K transition, while for $x<0.6$, the bandstructure hybridization becomes prevalent leading to the dominating momentum-indirect K-Q transition. This bandstructure hybridization is accompanied with strong modification of IX PL dynamics and nonlinear exciton properties. Our work provides foundation for bandstructure engineering in van der Waals heterostructures highlighting the importance of hybridization effects and opening a way to devices with accurately tailored electronic properties. △ Less

Submitted 23 September, 2023; originally announced September 2023.

Comments: Supporting Information can be found downloading and extracting the gzipped tar source file listed under "Other formats"

Exploring van der Waals materials with high anisotropy: geometrical and optical approaches

Authors: Aleksandr S. Slavich, Georgy A. Ermolaev, Mikhail K. Tatmyshevskiy, Adilet N. Toksumakov, Olga G. Matveeva, Dmitriy V. Grudinin, Arslan Mazitov, Konstantin V. Kravtsov, Alexander V. Syuy, Dmitry M. Tsymbarenko, Mikhail S. Mironov, Sergey M. Novikov, Ivan Kruglov, Davit A. Ghazaryan, Andrey A. Vyshnevyy, Aleksey V. Arsenin, Valentyn S. Volkov, Kostya S. Novoselov

Abstract: The emergence of van der Waals (vdW) materials resulted in the discovery of their giant optical, mechanical, and electronic anisotropic properties, immediately enabling countless novel phenomena and applications. Such success inspired an intensive search for the highest possible anisotropic properties among vdW materials. Furthermore, the identification of the most promising among the huge family… ▽ More The emergence of van der Waals (vdW) materials resulted in the discovery of their giant optical, mechanical, and electronic anisotropic properties, immediately enabling countless novel phenomena and applications. Such success inspired an intensive search for the highest possible anisotropic properties among vdW materials. Furthermore, the identification of the most promising among the huge family of vdW materials is a challenging quest requiring innovative approaches. Here, we suggest an easy-to-use method for such a survey based on the crystallographic geometrical perspective of vdW materials followed by their optical characterization. Using our approach, we found As2S3 as a highly anisotropic vdW material. It demonstrates rare giant in-plane optical anisotropy, high refractive index and transparency in the visible range, overcoming the century-long record set by rutile. Given these benefits, As2S3 opens a pathway towards next-generation nanophotonics as demonstrated by an ultrathin true zero-order quarter-waveplate that combines classical and the Fabry-Perot optical phase accumulations. Hence, our approach provides an effective and easy-to-use method to find vdW materials with the utmost anisotropic properties. △ Less

Submitted 5 September, 2023; originally announced September 2023.

Comments: 11 pages, 5 figures

Constructing Custom Thermodynamics Using Deep Learning

Authors: Xiaoli Chen, Beatrice W. Soh, Zi-En Ooi, Eleonore Vissol-Gaudin, Haijun Yu, Kostya S. Novoselov, Kedar Hippalgaonkar, Qianxiao Li

Abstract: One of the most exciting applications of artificial intelligence (AI) is automated scientific discovery based on previously amassed data, coupled with restrictions provided by known physical principles, including symmetries and conservation laws. Such automated hypothesis creation and verification can assist scientists in studying complex phenomena, where traditional physical intuition may fail. H… ▽ More One of the most exciting applications of artificial intelligence (AI) is automated scientific discovery based on previously amassed data, coupled with restrictions provided by known physical principles, including symmetries and conservation laws. Such automated hypothesis creation and verification can assist scientists in studying complex phenomena, where traditional physical intuition may fail. Here we develop a platform based on a generalized Onsager principle to learn macroscopic dynamical descriptions of arbitrary stochastic dissipative systems directly from observations of their microscopic trajectories. Our method simultaneously constructs reduced thermodynamic coordinates and interprets the dynamics on these coordinates. We demonstrate its effectiveness by studying theoretically and validating experimentally the stretching of long polymer chains in an externally applied field. Specifically, we learn three interpretable thermodynamic coordinates and build a dynamical landscape of polymer stretching, including the identification of stable and transition states and the control of the stretching rate. Our general methodology can be used to address a wide range of scientific and technological applications. △ Less

Submitted 22 December, 2023; v1 submitted 8 August, 2023; originally announced August 2023.

Comments: Fix figure visibility issue

A magnetically-induced Coulomb gap in graphene due to electron-electron interactions

Authors: E. E. Vdovin, M. T. Greenaway, Yu. N. Khanin, S. V. Morozov, O. Makarovsky, A. Patanè, A. Mishchenko, S. Slizovskiy, V. I. Fal'ko, A. K. Geim, K. S. Novoselov, L. Eaves

Abstract: Insights into the fundamental properties of graphene's Dirac-Weyl fermions have emerged from studies of electron tunnelling transistors in which an atomically thin layer of hexagonal boron nitride (hBN) is sandwiched between two layers of high purity graphene. Here, we show that when a single defect is present within the hBN tunnel barrier, it can inject electrons into the graphene layers and its… ▽ More Insights into the fundamental properties of graphene's Dirac-Weyl fermions have emerged from studies of electron tunnelling transistors in which an atomically thin layer of hexagonal boron nitride (hBN) is sandwiched between two layers of high purity graphene. Here, we show that when a single defect is present within the hBN tunnel barrier, it can inject electrons into the graphene layers and its sharply defined energy level acts as a high resolution spectroscopic probe of electron-electron interactions in graphene. We report a magnetic field dependent suppression of the tunnel current flowing through a single defect below temperatures of $\sim$ 2 K. This is attributed to the formation of a magnetically-induced Coulomb gap in the spectral density of electrons tunnelling into graphene due to electron-electron interactions. △ Less

Submitted 4 July, 2023; originally announced July 2023.

Journal ref: Communications Physics volume 6, Article number: 159 (2023)

Electrical excitation of carbon centers in hexagonal boron nitride with tuneable quantum efficiency

Authors: M. Grzeszczyk, K. Vaklinova, K. Watanabe, T. Taniguchi, K. S. Novoselov, M. Koperski

Abstract: Defect centers in wide-band-gap crystals attracted considerable attention due to the realisations of qubits, sensors, or single photon emitters at room temperature. The family of these centers is constantly growing, including well-known examples such as nitrogen-vacancy centers in diamond, silicon-vacancy in silicon carbide, chromium substitutions in aluminium oxide, and many others. Unfortunately… ▽ More Defect centers in wide-band-gap crystals attracted considerable attention due to the realisations of qubits, sensors, or single photon emitters at room temperature. The family of these centers is constantly growing, including well-known examples such as nitrogen-vacancy centers in diamond, silicon-vacancy in silicon carbide, chromium substitutions in aluminium oxide, and many others. Unfortunately, such defect centers embedded in highly insulating crystals have been notoriously difficult to excite electrically. Herewith, we present a realisation of insulating light-emitting diodes based on carbon centers in hexagonal boron nitride. The rational design of the vertical tunnelling devices via van der Waals technology enabled us to control the charge dynamics related to non-radiative tunelling, defect-to-band electroluminescence, and intradefect electroluminescence. The fundamental understanding of the tunnelling events enabled us to achieve high efficiency of electrical excitation, which exceeded by a few orders of magnitude the efficiency of optical excitation in the sub-band-gap regime. A combination of a Stark effect and screening by band electrons provide a control knob for tuning the energy of emission. With this work, we solve an outstanding problem of creating electrically driven devices realised with defect centers in wide-band-gap crystals, which are relevant in the domain of optoelectronics, telecommunication, computation, or sensing. △ Less

Submitted 23 May, 2023; originally announced May 2023.

Atomically-precise Vacancy-assembled Quantum Antidots

Authors: Hanyan Fang, Harshitra Mahalingam, Xinzhe Li, Xu Han, Zhizhan Qiu, Yixuan Han, Keian Noori, Dikshant Dulal, Hongfei Chen, Pin Lyu, Tianhao Yang, Jing Li, Chenliang Su, Wei Chen, Yongqing Cai, Antonio Castro H. Neto, Kostya S. Novoselov, Aleksandr Rodin, Jiong Lu

Abstract: Patterning antidots ("voids") into well-defined antidot lattices creates an intriguing class of artificial structures for the periodic modulation of 2D electron systems, leading to anomalous transport properties and exotic quantum phenomena as well as enabling the precise bandgap engineering of 2D materials to address technological bottleneck issues. However, realizing such atomic-scale quantum an… ▽ More Patterning antidots ("voids") into well-defined antidot lattices creates an intriguing class of artificial structures for the periodic modulation of 2D electron systems, leading to anomalous transport properties and exotic quantum phenomena as well as enabling the precise bandgap engineering of 2D materials to address technological bottleneck issues. However, realizing such atomic-scale quantum antidots (QADs) is infeasible by current nanolithographic techniques. Here, we report an atomically-precise bottom-up fabrication of a series of atomic-scale QADs with elegantly engineered quantum states through a controllable assembly of a chalcogenide single vacancy (SV) in 2D PtTe2, a type-II Dirac semimetal. Te SVs as atomic-scale "antidots" undergo thermal migration and assembly into highly-ordered SV lattices spaced by a single Te atom, reaching the ultimate downscaling limit of antidot lattices. Increasing the number of SVs in QADs strengthens the cumulative repulsive potential and consequently enhances collective interference of multiple-pocket scattered quasiparticles inside QADs, creating multi-level quantum hole states with tunable gap from telecom to far-infrared regime. Moreover, precisely engineered quantum hole states of QADs are symmetry-protected and thus survive upon atom-by-atom oxygen substitutional doping. Therefore, SV-assembled QADs exhibit unprecedented robustness and property tunability, which not only holds the key to their future applications but also embody a wide variety of material technologies. △ Less

Submitted 6 May, 2023; originally announced May 2023.

A hidden advantage of van der Waals materials for overcoming limitations in photonic integrated circuitry

Authors: Andrey A. Vyshnevyy, Georgy A. Ermolaev, Dmitriy V. Grudinin, Kirill V. Voronin, Ivan Kharichkin, Arslan Mazitov, Ivan A. Kruglov, Dmitry I. Yakubovsky, Prabhash Mishra, Roman V. Kirtaev, Aleksey V. Arsenin, Kostya S. Novoselov, Luis Martin-Moreno, Valentyn S. Volkov

Abstract: With the advance of on-chip nanophotonics, there is a high demand for high refractive index, low-loss materials. Currently, this technology is dominated by silicon, but van der Waals (vdW) materials with high refractive index can offer a very advanced alternative. Still, up to now it was not clear if the optical anisotropy perpendicular to the layers might be a hindering factor for the development… ▽ More With the advance of on-chip nanophotonics, there is a high demand for high refractive index, low-loss materials. Currently, this technology is dominated by silicon, but van der Waals (vdW) materials with high refractive index can offer a very advanced alternative. Still, up to now it was not clear if the optical anisotropy perpendicular to the layers might be a hindering factor for the development of vdW nanophotonics. Here, we studied WS2-based waveguides in terms of their optical properties and, particularly, in terms of possible crosstalk distance. Surprisingly, we discovered that the low refractive index in the direction perpendicular to the atomic layers improves the characteristics of such devices, mainly due to expanding the range of parameters at which single-mode propagation can be achieved. Thus, using anisotropic materials offers new opportunities and novel control knobs when designing the nanophotonic devices. △ Less

Submitted 31 March, 2023; originally announced April 2023.

Comments: 11 pages, 3 figures

Excited state spectroscopy and spin splitting in atomically thin quantum dots

Authors: P. Kumar, H. Kim, S. Tripathy, K. Watanabe, T. Taniguchi, K. S. Novoselov, D. Kotekar-Patil

Abstract: Semiconducting transition metal dichalcogenides (TMDCs) are very promising materials for quantum dots and spin-qubit implementation. Reliable operation of spin qubits requires the knowledge of Landé g-factor, which can be measured by exploiting the discrete energy spectrum on a quantum dot. However, the quantum dots realized in TMDCs has yet to reach the required quality for reliable measurement o… ▽ More Semiconducting transition metal dichalcogenides (TMDCs) are very promising materials for quantum dots and spin-qubit implementation. Reliable operation of spin qubits requires the knowledge of Landé g-factor, which can be measured by exploiting the discrete energy spectrum on a quantum dot. However, the quantum dots realized in TMDCs has yet to reach the required quality for reliable measurement of g-factor. Quantum dot sizes reported in TMDCs so far are not small enough to observe discrete energy levels on them. Here, we report on electron transport through discrete energy levels of quantum dot in a single layer MoS2. The quantum dot energy levels are separated by few (5-6) meV such that the ground state and the excited state transitions are clearly visible. This well resolved energy separation allows us to accurately measure the ground state g-factor of ~5 in MoS2 quantum dots. We observe a spin filling sequence in our quantum dot under perpendicular magnetic field. Such a system offers an excellent testbed to measure the key parameters for evaluation and implementation of spin-valley qubits in TMDCs, thus accelerating the development of quantum systems in two dimensional semiconducting TMDCs. △ Less

Submitted 27 March, 2023; originally announced March 2023.

Comments: 17 pages, 10 figures

Hexagonal boron nitride nanophotonics

Authors: D. V. Grudinin, G. A. Ermolaev, D. G. Baranov, A. N. Toksumakov, K. V. Voronin, A. S. Slavich, A. A. Vyshnevyy, A. B. Mazitov, I. A. Kruglov, D. Ghazaryan, A. V. Arsenin, K. S. Novoselov, V. S. Volkov

Abstract: A global trend to miniaturization and multiwavelength performance of nanophotonic devices drives research on novel phenomena, such as bound states in the continuum and Mietronics, as well as the survey for high-refractive index and strongly anisotropic materials and metasurfaces. Hexagonal boron nitride (hBN) is one of promising materials for the future nanophotonics owing to its inherent anisotro… ▽ More A global trend to miniaturization and multiwavelength performance of nanophotonic devices drives research on novel phenomena, such as bound states in the continuum and Mietronics, as well as the survey for high-refractive index and strongly anisotropic materials and metasurfaces. Hexagonal boron nitride (hBN) is one of promising materials for the future nanophotonics owing to its inherent anisotropy and prospects of high-quality monocrystals growth with atomically flat surface. Here, we present highly accurate optical constants of hBN in the broad wavelength range of 250-1700 nm combining the imaging ellipsometry measurements scanning near-field optical microscopy and first-principle quantum mechanical computations. hBN's high refractive index, up to 2.75 in ultraviolet (UV) and visible range, broadband birefringence of 0.7, and negligible optical losses make it an outstanding material for UV and visible range photonics. Based on our measurement results, we propose and design novel optical elements: handedness-preserving mirrors and subwavelength waveguides with dimensions of 40 nm operating in the visible and UV range, respectively. Remarkably, our results offer unique opportunity to bridge the size-gap between photonics and electronics. △ Less

Submitted 5 March, 2023; originally announced March 2023.

Comments: 12 pages, 4 figures

D4FT: A Deep Learning Approach to Kohn-Sham Density Functional Theory

Authors: Tianbo Li, Min Lin, Zheyuan Hu, Kunhao Zheng, Giovanni Vignale, Kenji Kawaguchi, A. H. Castro Neto, Kostya S. Novoselov, Shuicheng Yan

Abstract: Kohn-Sham Density Functional Theory (KS-DFT) has been traditionally solved by the Self-Consistent Field (SCF) method. Behind the SCF loop is the physics intuition of solving a system of non-interactive single-electron wave functions under an effective potential. In this work, we propose a deep learning approach to KS-DFT. First, in contrast to the conventional SCF loop, we propose to directly mini… ▽ More Kohn-Sham Density Functional Theory (KS-DFT) has been traditionally solved by the Self-Consistent Field (SCF) method. Behind the SCF loop is the physics intuition of solving a system of non-interactive single-electron wave functions under an effective potential. In this work, we propose a deep learning approach to KS-DFT. First, in contrast to the conventional SCF loop, we propose to directly minimize the total energy by reparameterizing the orthogonal constraint as a feed-forward computation. We prove that such an approach has the same expressivity as the SCF method, yet reduces the computational complexity from O(N^4) to O(N^3). Second, the numerical integration which involves a summation over the quadrature grids can be amortized to the optimization steps. At each step, stochastic gradient descent (SGD) is performed with a sampled minibatch of the grids. Extensive experiments are carried out to demonstrate the advantage of our approach in terms of efficiency and stability. In addition, we show that our approach enables us to explore more complex neural-based wave functions. △ Less

Submitted 1 March, 2023; originally announced March 2023.

Comments: Accepted by The Eleventh International Conference on Learning Representations (ICLR 2023, notable-top-25%)

pH-dependent water permeability switching and its memory in 1T' MoS$_2$ membranes

Authors: C. Hu, A. Achari, P. Rowe, H. Xiao, S. Suran, Z. Li, K. Huang, C. Chi, C. T. Cherian, V. Sreepal, P. D. Bentley, A. Pratt, N. Zhang, K. S. Novoselov, A. Michaelides, R. R. Nair

Abstract: Intelligent transport of molecular species across different barriers is critical for various biological functions and is achieved through the unique properties of biological membranes. An essential feature of intelligent transport is the ability to adapt to different external and internal conditions and also the ability to memorise the previous state. In biological systems, the most common form of… ▽ More Intelligent transport of molecular species across different barriers is critical for various biological functions and is achieved through the unique properties of biological membranes. An essential feature of intelligent transport is the ability to adapt to different external and internal conditions and also the ability to memorise the previous state. In biological systems, the most common form of such intelligence is expressed as hysteresis. Despite numerous advances made over previous decades on smart membranes, it is still a challenge for a synthetic membrane to display stable hysteretic behaviour for molecular transport. Here we show the memory effects and stimuli regulated transport of molecules through an intelligent phase changing MoS$_2$ membrane in response to external pH. We show that water and ion permeation through 1T' MoS$_2$ membranes follows a pH dependent hysteresis with a permeation rate that switches by a few orders of magnitude. We demonstrate that this phenomenon is unique to the 1T' phase of MoS$_2$ due to the presence of surface charge and exchangeable ions on the surface. We further demonstrate the potential application of this phenomenon in autonomous wound infection monitoring and pH-dependent nanofiltration. Our work significantly deepens understanding of the mechanism of water transport at the nanoscale and opens an avenue for developing neuromorphic applications, smart drug delivery systems, point-of-care diagnostics, smart sensors, and intelligent filtration devices. △ Less

Submitted 24 January, 2023; originally announced January 2023.

Journal ref: Nature 616, 719-723, 2023

Ultralow-noise terahertz detection by p-n junctions in gapped bilayer graphene

Authors: Elena Titova, Dmitry Mylnikov, Mikhail Kashchenko, Sergey Zhukov, Kirill Dzhikirba, Kostya Novoselov, Denis Bandurin, Georgy Alymov, Dmitry Svintsov

Abstract: Graphene shows a strong promise for detection of terahertz (THz) radiation due to its high carrier mobility, compatibility with on-chip waveguides and transistors, and small heat capacitance. At the same time, weak reaction of graphene's physical properties on the detected radiation can be traced down to the absence of band gap. Here, we study the effect of electrically-induced band gap on THz det… ▽ More Graphene shows a strong promise for detection of terahertz (THz) radiation due to its high carrier mobility, compatibility with on-chip waveguides and transistors, and small heat capacitance. At the same time, weak reaction of graphene's physical properties on the detected radiation can be traced down to the absence of band gap. Here, we study the effect of electrically-induced band gap on THz detection in graphene bilayer with split-gate p-n junction. We show that gap induction leads to simultaneous increase in current and voltage responsivities. At operating temperatures of ~25 K, the responsivity at 20 meV band gap is from 3 to 20 times larger than that in the gapless state. The maximum voltage responsivity of our devices at 0.13 THz illumination exceeds 50 kV/W, while the noise equivalent power falls down to 36 fW/Hz^0.5. These values set new records for semiconductor-based cryogenic terahertz detectors, and pave the way for efficient and fast terahertz detection. △ Less

Submitted 10 December, 2022; originally announced December 2022.

Terahertz photoconductivity in bilayer graphene transistors: evidence for tunneling at gate-induced junctions

Authors: Dmitry Mylnikov, Elena I. Titova, Mikhail A. Kashchenko, Ilya V. Safonov, Sergey S. Zhukov, Valentin A. Semkin, Kostya S. Novoselov, Denis A. Bandurin, Dmitry A. Svintsov

Abstract: Photoconductivity of novel materials is the key property of interest for design of photodetectors, optical modulators, and switches. Despite the photoconductivity of most novel 2d materials has been studied both theoretically and experimentally, the same is not true for 2d p-n junctions that are necessary blocks of most electronic devices. Here, we study the sub-terahertz photocoductivity of gappe… ▽ More Photoconductivity of novel materials is the key property of interest for design of photodetectors, optical modulators, and switches. Despite the photoconductivity of most novel 2d materials has been studied both theoretically and experimentally, the same is not true for 2d p-n junctions that are necessary blocks of most electronic devices. Here, we study the sub-terahertz photocoductivity of gapped bilayer graphene with electrically-induced p-n junctions. We find a strong positive contribution from junctions to resistance, temperature resistance coefficient and photo-resistivity at cryogenic temperatures T ~ 20 K. The contribution to these quantities from junctions exceeds strongly the bulk values at uniform channel doping even at small band gaps ~ 10 meV. We further show that positive junction photoresistance is a hallmark of interband tunneling, and not of intra-band thermionic conduction. Our results point to the possibility of creating various interband tunneling devices based on bilayer graphene, including steep-switching transistors and selective sensors. △ Less

Submitted 8 December, 2022; originally announced December 2022.

Unveiling the complex structure-property correlation of defects in 2D materials based on high throughput datasets

Authors: Pengru Huang, Ruslan luckin, Maxim Faleev, Nikita Kazeev, Abdalaziz Rashid Al-Maeeni, Daria V. Andreeva, Andrey Ustyuzhanin, Alexander Tormasov, A. H. Castro Neto, Kostya S. Novoselov

Abstract: Modification of physical properties of materials and design of materials with on-demand characteristics is at the heart of modern technology. Rare application relies on pure materials--most devices and technologies require careful design of materials properties through alloying, creating heterostructures of composites or controllable introduction of defects. At the same time, such designer materia… ▽ More Modification of physical properties of materials and design of materials with on-demand characteristics is at the heart of modern technology. Rare application relies on pure materials--most devices and technologies require careful design of materials properties through alloying, creating heterostructures of composites or controllable introduction of defects. At the same time, such designer materials are notoriously difficult for modelling. Thus, it is very tempting to apply machine learning methods for such systems. Unfortunately, there is only a handful of machine learning-friendly material databases available these days. We develop a platform for easy implementation of machine learning techniques to materials design and populate it with datasets on pristine and defected materials. Here we describe datasets of defects in represented 2D materials such as MoS2, WSe2, hBN, GaSe, InSe, and black phosphorous, calculated using DFT. Our study provides a data-driven physical understanding of complex behaviors of defect properties in 2D materials, holding promise for a guide to the development of efficient machine learning models. In addition, with the increasing enrollment of datasets, our database could provide a platform for designing of materials with predetermined properties. △ Less

Submitted 5 December, 2022; originally announced December 2022.

Comments: 19 pages, 4 figures

Journal ref: npj 2D Materials and Applications (2023) 6

Mixing of surface and bulk electronic states at a graphite-hexagonal boron nitride interface

Authors: Ciaran Mullan, Sergey Slizovskiy, Jun Yin, Ziwei Wang, Qian Yang, Shuigang Xu, Yaping Yang, Benjamin A. Piot, Sheng Hu, Takashi Taniguchi, Kenji Watanabe, Kostya S. Novoselov, A. K. Geim, Vladimir I. Fal'ko, Artem Mishchenko

Abstract: Van der Waals assembly enables exquisite design of electronic states in two-dimensional (2D) materials, often by superimposing a long-wavelength periodic potential on a crystal lattice using moiré superlattices. Here we show that electronic states in three-dimensional (3D) crystals such as graphite can also be tuned by the superlattice potential arising at the interface with another crystal, namel… ▽ More Van der Waals assembly enables exquisite design of electronic states in two-dimensional (2D) materials, often by superimposing a long-wavelength periodic potential on a crystal lattice using moiré superlattices. Here we show that electronic states in three-dimensional (3D) crystals such as graphite can also be tuned by the superlattice potential arising at the interface with another crystal, namely, crystallographically aligned hexagonal boron nitride. Such alignment is found to result in a multitude of Lifshitz transitions and Brown-Zak oscillations for near-surface 2D states whereas, in high magnetic fields, fractal states of Hofstadter's butterfly extend deep into graphite's bulk. Our work shows a venue to control 3D spectra by using the approach of 2D twistronics. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Breaking through the Mermin-Wagner limit in 2D van der Waals magnets

Authors: Sarah Jenkins, Levente Rozsa, Unai Atxitia, Richard F. L. Evans, Kostya S. Novoselov, Elton J. G. Santos

Abstract: The Mermin-Wagner theorem states that long-range magnetic order does not exist in one- or two-dimensional (2D) isotropic magnets with short-ranged interactions. The theorem has been a milestone in magnetism and has been driving the research of recently discovered 2D van der Waals (vdW) magnetic materials from fundamentals up to potential applications. In such systems, the existence of magnetic ord… ▽ More The Mermin-Wagner theorem states that long-range magnetic order does not exist in one- or two-dimensional (2D) isotropic magnets with short-ranged interactions. The theorem has been a milestone in magnetism and has been driving the research of recently discovered 2D van der Waals (vdW) magnetic materials from fundamentals up to potential applications. In such systems, the existence of magnetic ordering is typically attributed to the presence of a significant magnetic anisotropy, which is known to introduce a spin-wave gap and circumvent the core assumption of the theorem. Here we show that in finite-size 2D vdW magnets typically found in lab setups (e.g., within millimetres), short-range interactions can be large enough to allow the stabilisation of magnetic order at finite temperatures without any magnetic anisotropy for practical implementations. We demonstrate that magnetic ordering can be created in flakes of 2D materials independent of the lattice symmetry due to the intrinsic nature of the spin exchange interactions and finite-size effects in two-dimensions. Surprisingly we find that the crossover temperature, where the intrinsic magnetisation changes from superparamagnetic to a completely disordered paramagnetic regime, is weakly dependent on the system length, requiring giant sizes (e.g., of the order of the observable universe ~10$^{26}$ m) in order to observe the vanishing of the magnetic order at cryogenic temperatures as expected from the Mermin-Wagner theorem. Our findings indicate exchange interactions as the main driving force behind the stabilisation of short-range order in 2D magnetism and broaden the horizons of possibilities for exploration of compounds with low anisotropy at an atomically thin level. △ Less

Submitted 10 October, 2022; originally announced October 2022.

Giant and tunable excitonic optical anisotropy in single-crystal CsPbX$_3$ halide perovskites

Authors: G. A. Ermolaev, A. P. Pushkarev, A. Yu. Zhizhchenko, A. A. Kuchmizhak, I. V. Iorsh, I. Kruglov, A. Mazitov, A. Ishteev, K. Konstantinova, D. Saranin, A. S. Slavich, D. Stosic, E. Zhukova, G. Tselikov, Aldo Di Carlo, A. V. Arsenin, K. S. Novoselov, S. V. Makarov, V. S. Volkov

Abstract: During the last years, giant optical anisotropy demonstrated its paramount importance for light manipulation which resulted in numerous applications ranging from subdiffraction light guiding to switchable nanolasers. In spite of recent advances in the field, achieving continuous tunability of optical anisotropy remains an outstanding challenge. Here, we present a solution to the problem through ch… ▽ More During the last years, giant optical anisotropy demonstrated its paramount importance for light manipulation which resulted in numerous applications ranging from subdiffraction light guiding to switchable nanolasers. In spite of recent advances in the field, achieving continuous tunability of optical anisotropy remains an outstanding challenge. Here, we present a solution to the problem through chemical alteration of the ratio of halogen atoms (X = Br or Cl) in single-crystal CsPbX$_3$ halide perovskites. It turns out that the anisotropy originates from an excitonic resonance in the perovskite, which spectral position and strength are determined by the halogens composition. As a result, we manage to continually modify the optical anisotropy by 0.14. We also discover that the halide perovskite can demonstrate optical anisotropy up to 0.6 in the visible range -- the largest value among non-van der Waals materials. Moreover, our results reveal that this anisotropy could be in-plane and out-of-plane, depending on perovskite shape -- rectangular and square. Hence, it can serve as an additional degree of freedom for anisotropy manipulation. As a practical demonstration, we created perovskite anisotropic nanowaveguides and show a significant impact of anisotropy on high-order guiding modes. These findings pave the way for halide perovskites as a next-generation platform for tunable anisotropic photonics. △ Less

Submitted 7 October, 2022; originally announced October 2022.

Comments: 18 pages, 3 figures

Polygonal tessellations as predictive models of molecular monolayers

Authors: Krisztina Regős, Rémy Pawlak, Xing Wang, Ernst Meyer, Silvio Decurtins, Gábor Domokos, Kostya S. Novoselov, Shi-Xia Liu, Ulrich Aschauer

Abstract: Molecular self-assembly plays a very important role in various aspects of technology as well as in biological systems. Governed by the covalent, hydrogen or van der Waals interactions - self-assembly of alike molecules results in a large variety of complex patterns even in two dimensions (2D). Prediction of pattern formation for 2D molecular networks is extremely important, though very challenging… ▽ More Molecular self-assembly plays a very important role in various aspects of technology as well as in biological systems. Governed by the covalent, hydrogen or van der Waals interactions - self-assembly of alike molecules results in a large variety of complex patterns even in two dimensions (2D). Prediction of pattern formation for 2D molecular networks is extremely important, though very challenging, and so far, relied on computationally involved approaches such as density functional theory, classical molecular dynamics, Monte Carlo, or machine learning. Such methods, however, do not guarantee that all possible patterns will be considered and often rely on intuition. Here we introduce a much simpler, though rigorous, hierarchical geometric model founded on the mean-field theory of 2D polygonal tessellations to predict extended network patterns based on molecular-level information. Based on graph theory, this approach yields pattern classification and pattern prediction within well-defined ranges. When applied to existing experimental data, our model provides an entirely new view of self-assembled molecular patterns, leading to interesting predictions on admissible patterns and potential additional phases. While developed for hydrogen-bonded systems, an extension to covalently bonded graphene-derived materials or 3D structures such as fullerenes is possible, significantly opening the range of potential future applications. △ Less

Submitted 8 August, 2022; originally announced August 2022.

Geometric Filterless Photodetectors for Mid-infrared Spin Light

Authors: Jingxuan Wei, Yang Chen, Ying Li, Wei Li, Junsheng Xie, Chengkuo Lee, Kostya S Novoselov, Cheng-Wei Qiu

Abstract: Free-space circularly polarized light (CPL) detection, requiring polarizers and waveplates, has been well established, while such spatial degree of freedom is unfortunately absent in integrated on-chip optoelectronics. So far, those reported filterless CPL photodetectors suffer from the intrinsic small discrimination ratio, vulnerability to the non-CPL field components, and low responsivity. Here,… ▽ More Free-space circularly polarized light (CPL) detection, requiring polarizers and waveplates, has been well established, while such spatial degree of freedom is unfortunately absent in integrated on-chip optoelectronics. So far, those reported filterless CPL photodetectors suffer from the intrinsic small discrimination ratio, vulnerability to the non-CPL field components, and low responsivity. Here, we report a distinct paradigm of geometric photodetectors in mid-infrared exhibiting colossal discrimination ratio, close-to-perfect CPL-specific response, a zero-bias responsivity of 392 V/W at room temperature, and a detectivity of ellipticity down to 0.03$^o$ Hz$^{-1/2}$. Our approach employs plasmonic nanostructures array with judiciously designed symmetry, assisted by graphene ribbons to electrically read their near-field optical information. This geometry-empowered recipe for infrared photodetectors provides a robust, direct, strict, and high-quality solution to on-chip filterless CPL detection and unlocks new opportunities for integrated functional optoelectronic devices. △ Less

Submitted 8 April, 2022; originally announced April 2022.

Optical signature of cascade transitions between moiré interlayer excitons

Authors: Qinghai Tan, Abdullah Rasmita, Zhaowei Zhang, K. S. Novoselov, Wei-bo Gao

Abstract: Cascade transition between energy levels has important applications, such as in quantum information protocols and quantum cascade lasers. In two-dimensional heterostructure, the moiré superlattice potential can result in multiple interlayer exciton (IX) energy levels. We demonstrate the cascade transitions between such moiré IXs by performing time- and energy-resolved photoluminescence measurement… ▽ More Cascade transition between energy levels has important applications, such as in quantum information protocols and quantum cascade lasers. In two-dimensional heterostructure, the moiré superlattice potential can result in multiple interlayer exciton (IX) energy levels. We demonstrate the cascade transitions between such moiré IXs by performing time- and energy-resolved photoluminescence measurements. We show that the lower-energy moiré IX can be excited to higher-energy ones, facilitating IX population inversion. △ Less

Submitted 21 February, 2022; originally announced February 2022.

Holographic convergent electron beam diffraction (CBED) imaging of two-dimensional crystals

Authors: Tatiana Latychevskaia, Sarah Haigh, Kostya Novoselov

Abstract: Convergent beam electron diffraction (CBED) performed on two-dimensional (2D) materials recently emerged as a powerful tool to study structural and stacking defects, adsorbates, atomic 3D displacements in the layers, and the interlayer distances. The formation of the interference patterns in individual CBED spots of 2D crystals can be considered as a hologram, thus the CBED patterns can be directl… ▽ More Convergent beam electron diffraction (CBED) performed on two-dimensional (2D) materials recently emerged as a powerful tool to study structural and stacking defects, adsorbates, atomic 3D displacements in the layers, and the interlayer distances. The formation of the interference patterns in individual CBED spots of 2D crystals can be considered as a hologram, thus the CBED patterns can be directly reconstructed by conventional reconstruction methods adapted from holography. In this study, we review recent results applying CBED to 2D crystals and their heterostructures: holographic CBED on bilayers with the reconstruction of defects and the determination of interlayer distance, CBED on 2D crystal monolayers to reveal adsorbates, and CBED on multilayered van der Waals systems with moiré patterns for local structural determination. △ Less

Submitted 23 January, 2022; originally announced January 2022.

Journal ref: Surface Review and Letters, Vol. 28, No. 08, 2140001 (2021)

Carbon and vacancy centers in hexagonal boron nitride

Authors: P. Huang, M. Grzeszczyk, K. Vaklinova, K. Watanabe, T. Taniguchi, K. S. Novoselov, M. Koperski

Abstract: Creation of defect with predetermined optical, chemical and other characteristics is a powerful tool to enhance the functionalities of materials. Herewith, we utilize density functional theory to understand the microscopic mechanisms of formation of defects in hexagonal boron nitride based on vacancies and substitutional atoms. Through in-depth analysis of the defect-induced band structure and for… ▽ More Creation of defect with predetermined optical, chemical and other characteristics is a powerful tool to enhance the functionalities of materials. Herewith, we utilize density functional theory to understand the microscopic mechanisms of formation of defects in hexagonal boron nitride based on vacancies and substitutional atoms. Through in-depth analysis of the defect-induced band structure and formation energy in varying growth conditions, we uncovered a dominant role of interdefect electron paring in stabilization of defect complexes. The electron reorganization modifies the exchange component of the electronic interactions which dominates over direct Coulomb repulsion or structural relaxation effects making the combination of acceptor- and donor-type defect centers energetically favorable. Based on an analysis of a large number of defect complexes we develop a simple picture of the inheritance of electronic properties when individual defects are combined together to form more complex centers. △ Less

Submitted 29 December, 2021; originally announced December 2021.

Self-repairing high entropy oxides

Authors: Zongwen Liu, Pengru Huang, Lixian Sun, Yanping Liu, Jiangtao Qu, Julie Cairney, Zhong Zheng, Zhiming M. Wang, Naveed A. Khan, Zhiping Lai, Li Fu, Bing Teng, Cuifeng Zhou, Hong Zhao, Fen Xu, Pan Xiong, Junwu Zhu, Peng Yuan, Kosta Tsoutas, Behnam Akhavan, Marcela M. Bilek, Simon P. Ringer, Kostya S. Novoselov

Abstract: All biological organisms, from plants to living creatures, can heal minor wounds and damage. The realization of a similar self-healing capacity in inorganic materials has been a design target for many decades. This would represent a breakthrough in materials engineering, enabling many novel technological applications, since such materials would be able to resist damage caused by electromagnetic ir… ▽ More All biological organisms, from plants to living creatures, can heal minor wounds and damage. The realization of a similar self-healing capacity in inorganic materials has been a design target for many decades. This would represent a breakthrough in materials engineering, enabling many novel technological applications, since such materials would be able to resist damage caused by electromagnetic irradiation and/or mechanical impact. Here we demonstrate that a high-entropy oxide is intrinsically capable of undergoing an autonomous self-repairing process. Transmission electron microscopy revealed that the spinel structure of (AlCoCrCu0.5FeNi)3O4 can regrow and repair itself at the atomic level when damaged. Density functional theory calculations reveal that the extra enthalpy stored in the high entropy material during fabrication can be released to effectively heal macroscopic defects by regrowing into a partially ordered state. This extraordinary self-repairing phenomenon makes this new material highly desirable as a coating, enabling structures used in harsh environments to better withstand damage, such as cosmic irradiation in space, nuclear irradiation in nuclear power facilities, or tribological damage. Most importantly, our results set the general design principles for the synthesis of self-repairing materials. △ Less

Submitted 22 December, 2021; originally announced December 2021.

Comments: 12 pages,4 figures

Transition metal dichalcogenide nanospheres for high-refractive-index nanophotonics and biomedical theranostics

Authors: G. I. Tselikov, G. A. Ermolaev, A. A. Popov, G. V. Tikhonowski, A. S. Taradin, A. A. Vyshnevyy, A. V. Syuy, S. M. Klimentov, S. M. Novikov, A. B. Evlyukhin, A. V. Kabashin, A. V. Arsenin, K. S. Novoselov, V. S. Volkov

Abstract: Recent developments in the area of resonant dielectric nanostructures has created attractive opportunities for the concentrating and manipulating light at the nanoscale and the establishment of new exciting field of all-dielectric nanophotonics. Transition metal dichalcogenides (TMDCs) with nanopatterned surfaces are especially promising for these tasks. Still, the fabrication of these structures… ▽ More Recent developments in the area of resonant dielectric nanostructures has created attractive opportunities for the concentrating and manipulating light at the nanoscale and the establishment of new exciting field of all-dielectric nanophotonics. Transition metal dichalcogenides (TMDCs) with nanopatterned surfaces are especially promising for these tasks. Still, the fabrication of these structures requires sophisticated lithographic processes, drastically complicating application prospects. To bridge this gap and broaden the application scope of TMDC nanomaterials, we report here femtosecond laser-ablative fabrication of water-dispersed spherical TMDC (MoS2 and WS2) nanoparticles (NPs) of variable size (5 - 250 nm). Such nanoparticles demonstrate exciting optical and electronic properties inherited from TMDC crystals, due to preserved crystalline structure, which offers a unique combination of pronounced excitonic response and high refractive index value, making possible a strong concentration of electromagnetic field in the nanoparticles. Furthermore, such nanoparticles offer additional tunability due to hybridization between the Mie and excitonic resonances. Such properties bring to life a number of nontrivial effects, including enhanced photoabsorption and photothermal conversion. As an illustration, we demonstrate that the nanoparticles exhibit a very strong photothermal response, much exceeding that of conventional dielectric nanoresonators based on Si. Being in a mobile colloidal state and exhibiting superior optical properties compared to other dielectric resonant structures, the synthesized TMDC nanoparticles offer opportunities for the development of next-generation nanophotonic and nanotheranostic platforms, including photothermal therapy and multimodal bioimaging. △ Less

Submitted 27 November, 2021; originally announced November 2021.

Comments: 18 pages, 4 figures

ZnPSe$_3$ as ultrabright indirect bandgap system with microsecond excitonic lifetimes

Authors: M. Grzeszczyk, K. S. Novoselov, M. Koperski

Abstract: We report an optical characterization of ZnPSe$_3$ crystals that demonstrates indirect band gap characteristics in combination with unusually strong photoluminescence. We found evidence of interband recombination from excitonic states with microsecond lifetimes. Through optical characterization, we reconstructed the electronic band scheme relevant for fundamental processes of light absorption, car… ▽ More We report an optical characterization of ZnPSe$_3$ crystals that demonstrates indirect band gap characteristics in combination with unusually strong photoluminescence. We found evidence of interband recombination from excitonic states with microsecond lifetimes. Through optical characterization, we reconstructed the electronic band scheme relevant for fundamental processes of light absorption, carrier relaxation and radiative recombination. The investigation of the radiative processes in the presence of magnetic field revealed spin polarization of fundamental electronic states. This observation opens a pathway towards controlling the spin of excitonic states in technologically relevant microsecond timescales. △ Less

Submitted 14 November, 2021; originally announced November 2021.

Atomic and electronic structure of defects in hBN: enhancing single-defect functionalities

Authors: Z. Qiu, K. Vaklinova, P. Huang, M. Grzeszczyk, H. Yang, K. Watanabe, T. Taniguchi, K. S. Novoselov, J. Lu, M. Koperski

Abstract: Defect centers in insulators play a critical role in creating important functionalities in materials: prototype qubits, single-photon sources, magnetic field probes, and pressure sensors. These functionalities are highly dependent on their mid-gap electronic structure and orbital/spin wave-function contributions. However, in most cases, these fundamental properties remain unknown or speculative du… ▽ More Defect centers in insulators play a critical role in creating important functionalities in materials: prototype qubits, single-photon sources, magnetic field probes, and pressure sensors. These functionalities are highly dependent on their mid-gap electronic structure and orbital/spin wave-function contributions. However, in most cases, these fundamental properties remain unknown or speculative due to the defects being deeply embedded beneath the surface of highly resistive host crystals, thus impeding access through surface probes. Here, we directly inspected the atomic and electronic structures of defects in thin carbon-doped hexagonal boron nitride (hBN:C) using scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS). Such investigation adds direct information about the electronic mid-gap states to the well-established photoluminescence response (including single photon emission) of intentionally created carbon defects in the most commonly investigated van der Waals insulator. Our joint atomic-scale experimental and theoretical investigations reveal two main categories of defects: 1) single-site defects manifesting as donor-like states with atomically resolved structures observable via STM, and 2) multi-site defect complexes exhibiting a ladder of empty and occupied mid-gap states characterized by distinct spatial geometries. Combining direct probing of mid-gap states through tunneling spectroscopy with the inspection of the optical response of insulators hosting specific defect structures holds promise for creating and enhancing functionalities realized with individual defects in the quantum limit. These findings underscore not only the versatility of hBN:C as a platform for quantum defect engineering but also its potential to drive advancements in atomic-scale optoelectronics. △ Less

Submitted 17 March, 2024; v1 submitted 14 October, 2021; originally announced October 2021.

Environmental Impacts of Personal Protective Clothing Used to Combat COVID-19

Authors: Mohammad Abbas Uddin, Shaila Afroj, Tahmid Hasan, Chris Carr, Kostya S Novoselov, Nazmul Karim

Abstract: Personal protective clothing is critical to shield users from highly infectious diseases including COVID-19. Such clothing is predominantly single-use, made of plastic-based synthetic fibres such as polypropylene and polyester, low cost and able to provide protection against pathogens. However, the environmental impacts of synthetic fibre-based clothing are significant and well-documented. Despite… ▽ More Personal protective clothing is critical to shield users from highly infectious diseases including COVID-19. Such clothing is predominantly single-use, made of plastic-based synthetic fibres such as polypropylene and polyester, low cost and able to provide protection against pathogens. However, the environmental impacts of synthetic fibre-based clothing are significant and well-documented. Despite growing environmental concerns with single-use plastic-based protective clothing, the recent COVID-19 pandemic has seen a significant increase in their use, that could result in a further surge of oceanic plastic pollution, adding to mass of plastic waste that already threatens marine life. In this review, we briefly discuss the nature of the raw materials involved in the production of such clothing, as well as manufacturing techniques and the PPE supply chain. We identify the environmental impacts at critical points in the protective clothing value chain from production to consumption, focusing on water use, chemical pollution, CO2 emissions and waste. On the basis of these environmental impacts, we outline the need for fundamental changes in the business model, including increased usage of reusable protective clothing, addressing supply chain bottlenecks, establishing better waste management, and the use of sustainable materials and processes without associated environmental problems. △ Less

Submitted 2 September, 2021; originally announced September 2021.

Non-Hermitian engineering of terahertz light using exceptional points in electrically tuneable collective light-matter interactions

Authors: M. Said Ergoktas, Sina Soleymani, Nurbek Kakenov, Thomas B. Smith, Gokhan Bakan, Kaiyuan Wang, Sinan Balci, Alessandro Principi, Kostya S. Novoselov, Sahin K. Ozdemir, Coskun Kocabas

Abstract: The topological structure associated with the branchpoint singularity around an exceptional point (EP) provides new tools for controlling the propagation of electromagnetic waves and their interaction with matter. To date, observation of EPs in light-matter interactions has remained elusive and has hampered further progress in applications of EP physics. Here, we demonstrate the emergence of EPs i… ▽ More The topological structure associated with the branchpoint singularity around an exceptional point (EP) provides new tools for controlling the propagation of electromagnetic waves and their interaction with matter. To date, observation of EPs in light-matter interactions has remained elusive and has hampered further progress in applications of EP physics. Here, we demonstrate the emergence of EPs in the electrically controlled interaction of light with a collection of organic molecules in the terahertz regime at room temperature. We show, using time-domain terahertz spectroscopy, that the intensity and phase of terahertz pulses can be controlled by a gate voltage which drives the device across the EP. This fully electrically-tuneable system allows reconstructing the Riemann surface associated with the complex energy landscape and provides a topological control of light by tuning the loss-imbalance and frequency detuning of interacting modes. We anticipate that our work could pave the way for new means of dynamic control on the intensity and phase of terahertz field, developing topological optoelectronics, and studying the manifestations of EP physics in the quantum correlations of the light emitted by a collection of emitters coupled to resonators. △ Less

Submitted 26 August, 2021; originally announced August 2021.

Comments: 17 pages, 4 figures

Ion exchange in atomically thin clays and micas

Authors: Yi-Chao Zou, Lucas Mogg, Nick Clark, Cihan Bacaksiz, Slavisa Milanovic, Vishnu Sreepal, Guang-Ping Hao, Yi-Chi Wang, David G. Hopkinson, Roman Gorbachev, Samuel Shaw, Kostya S. Novoselov, Rahul Raveendran-Nair, Francois M. Peeters, Marcelo Lozada-Hidalgo, Sarah J. Haigh

Abstract: Clays and micas are receiving attention as materials that, in their atomically thin form, could allow for novel proton conductive, ion selective, osmotic power generation, or solvent filtration membranes. The interest arises from the possibility of controlling their properties by exchanging ions in the crystal lattice. However, the ion exchange process itself remains largely unexplored in atomical… ▽ More Clays and micas are receiving attention as materials that, in their atomically thin form, could allow for novel proton conductive, ion selective, osmotic power generation, or solvent filtration membranes. The interest arises from the possibility of controlling their properties by exchanging ions in the crystal lattice. However, the ion exchange process itself remains largely unexplored in atomically thin materials. Here we use atomic-resolution scanning transmission electron microscopy to study the dynamics of the process and reveal the binding sites of individual ions in atomically thin and artificially restacked clays and micas. Imaging ion exchange after different exposure time and for different crystal thicknesses, we find that the ion diffusion constant, D, for the interlayer space of atomically thin samples is up to 10^4 times larger than in bulk crystals and approaches its value in free water. Surprisingly, samples where no bulk exchange is expected display fast exchange if the mica layers are twisted and restacked; but in this case, the exchanged ions arrange in islands controlled by the moiré superlattice dimensions. We attribute the fast ion diffusion to enhanced interlayer expandability resulting from weaker interlayer binding forces in both atomically thin and restacked materials. Finally, we demonstrate images of individual surface cations for these materials, which had remained elusive in previous studies. This work provides atomic scale insights into ion diffusion in highly confined spaces and suggests strategies to design novel exfoliated clays membranes. △ Less

Submitted 14 July, 2021; originally announced July 2021.

Comments: 11 pages, 4 figures, plus 35 pages supplementary information

Out-of-equilibrium criticalities in graphene superlattices

Authors: Alexey I. Berdyugin, Na Xin, Haoyang Gao, Sergey Slizovskiy, Zhiyu Dong, Shubhadeep Bhattacharjee, P. Kumaravadivel, Shuigang Xu, L. A. Ponomarenko, Matthew Holwill, D. A. Bandurin, Minsoo Kim, Yang Cao, M. T. Greenaway, K. S. Novoselov, I. V. Grigorieva, K. Watanabe, T. Taniguchi, V. I. Fal'ko, L. S. Levitov, R. Krishna Kumar, A. K. Geim

Abstract: In thermodynamic equilibrium, current in metallic systems is carried by electronic states near the Fermi energy whereas the filled bands underneath contribute little to conduction. Here we describe a very different regime in which carrier distribution in graphene and its superlattices is shifted so far from equilibrium that the filled bands start playing an essential role, leading to a critical-cu… ▽ More In thermodynamic equilibrium, current in metallic systems is carried by electronic states near the Fermi energy whereas the filled bands underneath contribute little to conduction. Here we describe a very different regime in which carrier distribution in graphene and its superlattices is shifted so far from equilibrium that the filled bands start playing an essential role, leading to a critical-current behavior. The criticalities develop upon the velocity of electron flow reaching the Fermi velocity. Key signatures of the out-of-equilibrium state are current-voltage characteristics resembling those of superconductors, sharp peaks in differential resistance, sign reversal of the Hall effect, and a marked anomaly caused by the Schwinger-like production of hot electron-hole plasma. The observed behavior is expected to be common for all graphene-based superlattices. △ Less

Submitted 11 February, 2022; v1 submitted 23 June, 2021; originally announced June 2021.

Comments: 22 pages, 11 figures

Journal ref: Science 375, 430-433 (2022)

Topological phase singularities in atomically thin high-refractive-index materials

Authors: Georgy Ermolaev, Kirill Voronin, Denis G. Baranov, Vasyl Kravets, Gleb Tselikov, Yury Stebunov, Dmitry Yakubovsky, Sergey Novikov, Andrey Vyshnevyy, Arslan Mazitov, Ivan Kruglov, Sergey Zhukov, Roman Romanov, Andrey M. Markeev, Aleksey Arsenin, Kostya S. Novoselov, Alexander N. Grigorenko, Valentyn Volkov

Abstract: Atomically thin transition metal dichalcogenides (TMDCs) present a promising platform for numerous photonic applications due to excitonic spectral features, possibility to tune their constants by external gating, doping, or light, and mechanical stability. Utilization of such materials for sensing or optical modulation purposes would require a clever optical design, as by itself the 2D materials c… ▽ More Atomically thin transition metal dichalcogenides (TMDCs) present a promising platform for numerous photonic applications due to excitonic spectral features, possibility to tune their constants by external gating, doping, or light, and mechanical stability. Utilization of such materials for sensing or optical modulation purposes would require a clever optical design, as by itself the 2D materials can offer only a small optical phase delay - consequence of the atomic thickness. To address this issue, we combine films of 2D semiconductors which exhibit excitonic lines with the Fabry-Perot resonators of the standard commercial SiO$_2$/Si substrate, in order to realize topological phase singularities in reflection. Around these singularities, reflection spectra demonstrate rapid phase changes while the structure behaves as a perfect absorber. Furthermore, we demonstrate that such topological phase singularities are ubiquitous for the entire class of atomically thin TMDCs and other high-refractive-index materials, making it a powerful tool for phase engineering in flat optics. As a practical demonstration, we employ PdSe$_2$ topological phase singularities for a refractive index sensor and demonstrate its superior phase sensitivity compared to typical surface plasmon resonance sensors. △ Less

Submitted 23 June, 2021; originally announced June 2021.

Van der Waals interaction affects wrinkle formation in two-dimensional materials

Authors: Pablo Ares, Yi Bo Wang, Colin R. Woods, James Dougherty, Laura Fumagalli, Francisco Guinea, Benny Davidovitch, Kostya S. Novoselov

Abstract: Nonlinear mechanics of solids is an exciting field that encompasses both beautiful mathematics, such as the emergence of instabilities and the formation of complex patterns, as well as multiple applications. Two-dimensional crystals and van der Waals (vdW) heterostructures allow revisiting this field on the atomic level, allowing much finer control over the parameters and offering atomistic interp… ▽ More Nonlinear mechanics of solids is an exciting field that encompasses both beautiful mathematics, such as the emergence of instabilities and the formation of complex patterns, as well as multiple applications. Two-dimensional crystals and van der Waals (vdW) heterostructures allow revisiting this field on the atomic level, allowing much finer control over the parameters and offering atomistic interpretation of experimental observations. In this work, we consider the formation of instabilities consisting of radially-oriented wrinkles around mono- and few-layer "bubbles" in two-dimensional vdW heterostructures. Interestingly, the shape and wavelength of the wrinkles depend not only on the thickness of the two-dimensional crystal forming the bubble, but also on the atomistic structure of the interface between the bubble and the substrate, which can be controlled by their relative orientation. We argue that the periodic nature of these patterns emanates from an energetic balance between the resistance of the top membrane to bending, which favors large wavelength of wrinkles, and the membrane-substrate vdW attraction, which favors small wrinkle amplitude. Employing the classical "Winkler foundation" model of elasticity theory, we show that the number of radial wrinkles conveys a valuable relationship between the bending rigidity of the top membrane and the strength of the vdW interaction. Armed with this relationship, we use our data to demonstrate a nontrivial dependence of the bending rigidity on the number of layers in the top membrane, which shows two different regimes driven by slippage between the layers, and a high sensitivity of the vdW force to the alignment between the substrate and the membrane. △ Less

Submitted 27 May, 2021; originally announced May 2021.

Journal ref: Proceedings of the National Academy of Sciences 2021, 118, e2025870118

Twisted monolayer and bilayer graphene for vertical tunneling transistors

Authors: Davit A. Ghazaryan, Abhishek Misra, Evgenii E. Vdovin, Kenji Watanabe, Takashi Taniguchi, Sergei V. Morozov, Artem Mishchenko, Kostya S. Novoselov

Abstract: We prepare twist-controlled resonant tunneling transistors consisting of monolayer (Gr) and Bernal bilayer (BGr) graphene electrodes separated by a thin layer of hexagonal boron nitride (hBN). The resonant conditions are achieved by closely aligning the crystallographic orientation of the graphene electrodes, which leads to momentum conservation for tunneling electrons at certain bias voltages. Un… ▽ More We prepare twist-controlled resonant tunneling transistors consisting of monolayer (Gr) and Bernal bilayer (BGr) graphene electrodes separated by a thin layer of hexagonal boron nitride (hBN). The resonant conditions are achieved by closely aligning the crystallographic orientation of the graphene electrodes, which leads to momentum conservation for tunneling electrons at certain bias voltages. Under such conditions, negative differential conductance (NDC) can be achieved. Application of in-plane magnetic field leads to electrons acquiring additional momentum during the tunneling process, which allows control over the resonant conditions. △ Less

Submitted 25 March, 2021; originally announced March 2021.

Journal ref: Appl. Phys. Lett. 118, 183106 (2021)

Mechanical Properties of Atomically Thin Tungsten Dichalcogenides: WS$_2$, WSe$_2$ and WTe$_2$

Authors: Alexey Falin, Matthew Holwill, Haifeng Lv, Wei Gan, Jun Cheng, Rui Zhang, Dong Qian, Matthew R. Barnett, Elton J. G. Santos, Konstantin S. Novoselov, Tao Tao, Xiaojun Wu, Lu Hua Li

Abstract: Two-dimensional (2D) tungsten disulfide (WS$_2$), tungsten diselenide (WSe$_2$), and tungsten ditelluride (WTe$_2$) draw increasing attention due to their attractive properties deriving from the heavy tungsten and chalcogenide atoms, but their mechanical properties are still mostly unknown. Here, we determine the intrinsic and air-aged mechanical properties of mono-, bi-, and trilayer (1-3L) WS… ▽ More Two-dimensional (2D) tungsten disulfide (WS$_2$), tungsten diselenide (WSe$_2$), and tungsten ditelluride (WTe$_2$) draw increasing attention due to their attractive properties deriving from the heavy tungsten and chalcogenide atoms, but their mechanical properties are still mostly unknown. Here, we determine the intrinsic and air-aged mechanical properties of mono-, bi-, and trilayer (1-3L) WS$_2$, WSe$_2$ and WTe$_2$ using a complementary suite of experiments and theoretical calculations. High-quality 1L WS$_2$ has the highest Young's modulus (302.4+-24.1 GPa) and strength (47.0+-8.6 GPa) of the entire family, overpassing those of 1L WSe$_2$ (258.6+-38.3 and 38.0+-6.0 GPa, respectively) and WTe$_2$ (149.1+-9.4 and 6.4+-3.3 GPa, respectively). However, the elasticity and strength of WS$_2$ decrease most dramatically with increased thickness among the three materials. We interpret the phenomenon by the different tendencies for interlayer sliding in equilibrium state and under in-plane strain and out-of-plane compression conditions in the indentation process, revealed by finite element method (FEM) and density functional theory (DFT) calculations including van der Waals (vdW) interactions. We also demonstrate that the mechanical properties of the high-quality 1-3L WS$_2$ and WSe$_2$ are largely stable in the air for up to 20 weeks. Intriguingly, the 1-3L WSe$_2$ shows increased modulus and strength values with aging in the air. This is ascribed to oxygen doping, which reinforces the structure. The present study will facilitate the design and use of 2D tungsten dichalcogenides in applications, such as strain engineering and flexible field-effect transistors (FETs). △ Less

Submitted 28 January, 2021; originally announced January 2021.

Journal ref: ACS Nano 2021

Two-dimensional adaptive membranes with programmable water and ionic channels

Authors: Daria V. Andreeva, Maxim Trushin, Anna Nikitina, Mariana C. F. Costa, Pavel V. Cherepanov, Matthew Holwill, Siyu Chen, Kou Yang, See Wee Chee, Utkur Mirsaidov, Antonio H. Castro Neto, Kostya S. Novoselov

Abstract: Membranes are ubiquitous in nature with primary functions that include adaptive filtering and selective transport of chemical and molecular species. Being critical to cellular functions, they are also fundamental in many areas of science and technology. Of particular importance are the adaptive and programmable membranes that can change their permeability or selectivity depending on the environmen… ▽ More Membranes are ubiquitous in nature with primary functions that include adaptive filtering and selective transport of chemical and molecular species. Being critical to cellular functions, they are also fundamental in many areas of science and technology. Of particular importance are the adaptive and programmable membranes that can change their permeability or selectivity depending on the environment. Here, we explore implementation of such biological functions in artificial membranes and demonstrate two dimensional self assembled heterostructures of graphene oxide and polyamine macromolecules, forming a network of ionic channels that exhibit regulated permeability of water and monovalent ions. This permeability can be tuned by a change of pH or the presence of certain ions. Unlike traditional membranes, the regulation mechanism reported here relies on specific interactions between the membranes internal components and ions. This allows fabrication of membranes with programmable, predetermined permeability and selectivity, governed by the choice of components, their conformation and their charging state. △ Less

Submitted 10 December, 2020; originally announced December 2020.

Comments: Nat. Nanotechnol. (2020)

Properties and dynamics of meron topological spin textures in the two-dimensional magnet CrCl3

Authors: Mathias Augustin, Sarah Jenkins, Richard F. L. Evans, Kostya S. Novoselov, Elton J. G. Santos

Abstract: Merons are nontrivial topological spin textures highly relevant for many phenomena in solid state physics. Despite their importance, direct observation of such vortex quasiparticles is scarce and has been limited to a few complex materials. Here we show the emergence of merons and antimerons in recently discovered two-dimensional (2D) CrCl3 at zero magnetic field. We show their entire evolution fr… ▽ More Merons are nontrivial topological spin textures highly relevant for many phenomena in solid state physics. Despite their importance, direct observation of such vortex quasiparticles is scarce and has been limited to a few complex materials. Here we show the emergence of merons and antimerons in recently discovered two-dimensional (2D) CrCl3 at zero magnetic field. We show their entire evolution from pair creation, their diffusion over metastable domain walls, and collision leading to large magnetic monodomains. Both quasiparticles are stabilized spontaneously during cooling at regions where in-plane magnetic frustration takes place. Their dynamics is determined by the interplay between the strong in-plane dipolar interactions and the weak out-of-plane magnetic anisotropy stabilising a vortex core within a radius of 8-10 nm. Our results push the boundary to what is currently known about non-trivial spin structures in 2D magnets and open exciting opportunities to control magnetic domains via topological quasiparticles. △ Less

Submitted 27 January, 2021; v1 submitted 6 December, 2020; originally announced December 2020.

Comments: Nature Communications 12, 185 (2021). Editors' Highlights section

Quantum rescaling, domain metastability and hybrid domain-walls in two-dimensional CrI3 magnets

Authors: Dina Abdul-Wahab, Mathias Augustin, Samuel Manas Valero, Wenjun Kuang, Sarah Jenkins, Eugenio Coronado, Irina V. Grigorieva, Ivan J. Vera-Marun, Efren Navarro-Moratalla, Richard F. L. Evans, Kostya S. Novoselov, Elton J. G. Santos

Abstract: Higher-order exchange interactions and quantum effects are widely known to play an important role in describing the properties of low-dimensional magnetic compounds. Here we identify the recently discovered two-dimensional (2D) van der Waals (vdW) CrI3 as a quantum non-Heisenberg material with properties far beyond an Ising magnet as initially assumed. We find that biquadratic exchange interaction… ▽ More Higher-order exchange interactions and quantum effects are widely known to play an important role in describing the properties of low-dimensional magnetic compounds. Here we identify the recently discovered two-dimensional (2D) van der Waals (vdW) CrI3 as a quantum non-Heisenberg material with properties far beyond an Ising magnet as initially assumed. We find that biquadratic exchange interactions are essential to quantitatively describe the magnetism of CrI3 but requiring quantum rescaling corrections to reproduce its thermal properties. The quantum nature of the heat bath represented by discrete electron-spin and phonon-spin scattering processes induced the formation of spin fluctuations in the low temperature regime. These fluctuations induce the formation of metastable magnetic domains evolving into a single macroscopic magnetization or even a monodomain over surface areas of a few micrometers. Such domains display hybrid characteristics of Neel and Bloch types with a narrow domain wall width in the range of 3-5 nm. Similar behaviour is expected for the majority of 2D vdW magnets where higher-order exchange interactions are appreciable. △ Less

Submitted 5 November, 2020; originally announced November 2020.

Journal ref: Adv. Mater. 2020, 2004138