-
Ultraviolet cross-luminescence in ternary chlorides of alkali and alkaline-earth metals
Authors:
Vojtech Vanecek,
Juraj Paterek,
Robert Kral,
Romana Kucerkova,
Vladimir Babin,
Jan Rohlicek,
Roberto Cala,
Nicolaus Kratochwil,
Etiennette Auffray,
Martin Nikl
Abstract:
After the discovery of a cross-luminescence (CL) in BaF2 in 1982, a large number of CL scintillators were investigated. However, no CL scintillator superior to BaF2 has been discovered, and the research of CL scintillators has subsided. Recent technological development in medical imaging and high-energy physics created a new demand for ultra-fast scintillators further supported by the development…
▽ More
After the discovery of a cross-luminescence (CL) in BaF2 in 1982, a large number of CL scintillators were investigated. However, no CL scintillator superior to BaF2 has been discovered, and the research of CL scintillators has subsided. Recent technological development in medical imaging and high-energy physics created a new demand for ultra-fast scintillators further supported by the development of UV-sensitive semiconductor photodetectors. As a consequence, renewed interest in CL scintillators appeared. To satisfy the requirements of fast timing applications high photo-detection efficiency, e. i. a good spectral match between the scintillator and photodetector must be achieved. Cesium-based ternary chlorides could provide a red-shift (~1.5 eV) of CL towards the sensitive region of the photodetector (PMT or SiPM) while keeping light output and timing characteristics comparable to BaF2.
△ Less
Submitted 16 September, 2024;
originally announced September 2024.
-
Growth and Spectroscopic Properties of Pr$^{3+}$ Doped Lu$_2$S$_3$ SingleCrystals
Authors:
Vojtech Vanecek,
Vitezslav Jary,
Robert Kral,
Lubomir Havlak,
Ales Vlk,
Romana Kucerkova,
Petr Prusa,
Jan Barta,
Martin Nikl
Abstract:
For the first time Lu$_2$S$_3$ (undoped and Pr-doped) single crystals were successfully grown from melt using micro-pulling-down (mPD) technique. Customization of halide mPD apparatus allowed us to grow rod-shaped (Ø2 mm and length around 20 mm) crystals of Lu$_2$S$_3$ with high melting temperature (~1750 $^\circ$C). X-ray powder diffraction revealed that the grown crystals exhibit the ε-Lu$_2$S…
▽ More
For the first time Lu$_2$S$_3$ (undoped and Pr-doped) single crystals were successfully grown from melt using micro-pulling-down (mPD) technique. Customization of halide mPD apparatus allowed us to grow rod-shaped (Ø2 mm and length around 20 mm) crystals of Lu$_2$S$_3$ with high melting temperature (~1750 $^\circ$C). X-ray powder diffraction revealed that the grown crystals exhibit the ε-Lu$_2$S$_3$ crystal structure ($α$-Al$_2$O$_3$ type, space group R-3c). Optical and scintillation properties of both the undoped and Pr$^{3+}$ doped Lu$_2$S$_3$ were investigated. Fast 5d-4f Pr$^{3+}$ luminescence was observed in both photoluminescence and radioluminescence spectra. The presented technology is an effective tool for the exploration of a large family of high-melting sulfides. Such materials show promise for application as scintillators, active laser media, and optoelectronic components.
△ Less
Submitted 16 September, 2024;
originally announced September 2024.
-
Advanced Halide Scintillators: From the Bulk to Nano
Authors:
Vojtech Vanecek,
Katerina Decka,
Eva Mihokova,
Vaclav Cuba,
Robert Kral,
Martin Nikl
Abstract:
Halide scintillators play a crucial role in the detection of ionizing radiation since the discovery of scintillation in NaI:Tl in 1948. The discovery of NaI:Tl motivated the research and development (R&D) of halide scintillators resulting in the development of CsI:Tl, CsI:Na, CaF$_2$:Eu, etc. Later, the R&D shifted toward oxide materials due to their high mechanical and chemical stability, good sc…
▽ More
Halide scintillators play a crucial role in the detection of ionizing radiation since the discovery of scintillation in NaI:Tl in 1948. The discovery of NaI:Tl motivated the research and development (R&D) of halide scintillators resulting in the development of CsI:Tl, CsI:Na, CaF$_2$:Eu, etc. Later, the R&D shifted toward oxide materials due to their high mechanical and chemical stability, good scintillation properties, and relative ease of bulk single crystal growth. However, the development in crystal growth technology allowed for the growth of high-quality single crystals of hygroscopic and mechanically fragile materials including SrI$_2$ and LaBr$_3$. Scintillators based on these materials exhibit excellent performance and push the limits of inorganic scintillators. These results motivated intense research of a large variety of halide-based scintillators. Moreover, materials based on lead halide perovskites found application in the fields of photovoltaics, solid-state lighting, and lasers. The first studies show also the significant potential of lead halide perovskites as ultrafast scintillators in the form of NCs. The purpose of this review is to summarize the R&D in the field of halide scintillators during the last decade and to highlight perspectives for future development.
△ Less
Submitted 16 September, 2024;
originally announced September 2024.
-
Li$_2$MnCl$_4$ single crystal: new candidate for red-emitting neutron scintillator
Authors:
Vojtech Vanecek,
Robert Kral,
Katerina Krehlikova,
Romana Kuverkova,
Vladimir Babin,
Petra Zemenova,
Jan Rohlicek,
Zuzana Malkova,
Terezia Jurkovicova,
Martin Nikl
Abstract:
Novel red-emitting scintillator Li$_2$MnCl$_4$ is proposed as a candidate for thermal neutron detection. It features high Li content, low density, low effective atomic number, and emission in red-NIR region. These characteristics make it an interesting candidate for long distance neutron detection in harsh enviroments e. g. decomisioning of nuclear powerplants. The absorption spectrum is thoroughl…
▽ More
Novel red-emitting scintillator Li$_2$MnCl$_4$ is proposed as a candidate for thermal neutron detection. It features high Li content, low density, low effective atomic number, and emission in red-NIR region. These characteristics make it an interesting candidate for long distance neutron detection in harsh enviroments e. g. decomisioning of nuclear powerplants. The absorption spectrum is thoroughly investigated in the scope of Tanabe-Sugano diagram. Luminescence mechanism in the undoped Li$_2$MnCl$_4$ is studied in depth. Doping by Eu$^{2+}$ and Ce$^{3+}$ is introduced as a trial to improve the scintillation efficiency. We show in the Eu$^{2+}$ and Ce$^{3+}$ doped Li$_2$MnCl$_4$ that luminescence mechanism involves energy transfer from the dopants to Mn$^{2+}$, and propose the local lattice distortion around the dopant and a possible charge compensation mechanisms.
△ Less
Submitted 28 August, 2024;
originally announced August 2024.
-
On the origin of the light yield enhancement in polymeric composite scintillators loaded with dense nanoparticles
Authors:
Irene Villa,
Angelo Monguzzi,
Roberto Lorenzi,
Matteo Orfano,
Vladimir Babin,
František Hájek,
Karla Kuldová,
Romana Kučerková,
Alena Beitlerová,
Ilaria Mattei,
Hana Buresova,
Radek Pjatkan,
Václav Čuba,
Lenka Prouzová Procházková,
Martin Nikl
Abstract:
Fast emitting polymeric scintillators are requested in advanced applications where high-speed detectors with large signal-to-noise ratio are needed. However, their low density implies a weak stopping power of high energy radiations, thus a limited light output and sensitivity. To enhance their performances, polymeric scintillators can be loaded with dense nanoparticles (NPs). We investigate the pr…
▽ More
Fast emitting polymeric scintillators are requested in advanced applications where high-speed detectors with large signal-to-noise ratio are needed. However, their low density implies a weak stopping power of high energy radiations, thus a limited light output and sensitivity. To enhance their performances, polymeric scintillators can be loaded with dense nanoparticles (NPs). We investigate the properties of a series of polymeric scintillators by means of photoluminescence and scintillation spectroscopy, comparing standard scintillators with a composite system loaded with dense hafnium dioxide (HfO2) NPs. The nanocomposite shows a scintillation yield enhancement of +100% with unchanged time response. We provide for the first time an interpretation of this effect, pointing out the local effect of NPs in the generation of emissive states upon interaction with the ionizing radiation. The obtained results indicate that coupling of fast conjugated emitters with optically inert dense NPs could allow to surpass the actual limits of pure polymeric scintillators.
△ Less
Submitted 2 August, 2024;
originally announced August 2024.
-
Needs, trends, and advances in scintillators for radiographic imaging and tomography
Authors:
Zhehui Wang,
Christophe Dujardin,
Matthew S. Freeman,
Amanda E. Gehring,
James F. Hunter,
Paul Lecoq,
Wei Liu,
Charles L. Melcher,
C. L. Morris,
Martin Nikl,
Ghanshyam Pilania,
Reeju Pokharel,
Daniel G. Robertson,
Daniel J. Rutstrom,
Sky K. Sjue,
Anton S. Tremsin,
S. A. Watson,
Brenden W. Wiggins,
Nicola M. Winch,
Mariya Zhuravleva
Abstract:
Scintillators are important materials for radiographic imaging and tomography (RadIT), when ionizing radiations are used to reveal internal structures of materials. Since its invention by Röntgen, RadIT now come in many modalities such as absorption-based X-ray radiography, phase contrast X-ray imaging, coherent X-ray diffractive imaging, high-energy X- and $γ-$ray radiography at above 1 MeV, X-ra…
▽ More
Scintillators are important materials for radiographic imaging and tomography (RadIT), when ionizing radiations are used to reveal internal structures of materials. Since its invention by Röntgen, RadIT now come in many modalities such as absorption-based X-ray radiography, phase contrast X-ray imaging, coherent X-ray diffractive imaging, high-energy X- and $γ-$ray radiography at above 1 MeV, X-ray computed tomography (CT), proton imaging and tomography (IT), neutron IT, positron emission tomography (PET), high-energy electron radiography, muon tomography, etc. Spatial, temporal resolution, sensitivity, and radiation hardness, among others, are common metrics for RadIT performance, which are enabled by, in addition to scintillators, advances in high-luminosity accelerators and high-power lasers, photodetectors especially CMOS pixelated sensor arrays, and lately data science. Medical imaging, nondestructive testing, nuclear safety and safeguards are traditional RadIT applications. Examples of growing or emerging applications include space, additive manufacturing, machine vision, and virtual reality or `metaverse'. Scintillator metrics such as light yield and decay time are correlated to RadIT metrics. More than 160 kinds of scintillators and applications are presented during the SCINT22 conference. New trends include inorganic and organic scintillator heterostructures, liquid phase synthesis of perovskites and $μ$m-thick films, use of multiphysics models and data science to guide scintillator development, structural innovations such as photonic crystals, nanoscintillators enhanced by the Purcell effect, novel scintillator fibers, and multilayer configurations. Opportunities exist through optimization of RadIT with reduced radiation dose, data-driven measurements, photon/particle counting and tracking methods supplementing time-integrated measurements, and multimodal RadIT.
△ Less
Submitted 20 December, 2022;
originally announced December 2022.
-
Nd:YAG single crystals grown by floating zone method in laser furnace
Authors:
Frantisek Zajic,
Martin Klejch,
Adam Elias,
Milan Klicpera,
Alena Beitlerova,
Martin Nikl,
Jiri Pospisil
Abstract:
We report on single crystal growth of laser material Nd:YAG widely used in the applications by innovative crucible-free floating zone method implemented in an advanced laser optical furnace. We have optimized the parameters for the production of high-quality single crystals of the size typical for laser tubes. To reduce the strain and improve machinability, we have developed an afterheater to ther…
▽ More
We report on single crystal growth of laser material Nd:YAG widely used in the applications by innovative crucible-free floating zone method implemented in an advanced laser optical furnace. We have optimized the parameters for the production of high-quality single crystals of the size typical for laser tubes. To reduce the strain and improve machinability, we have developed an afterheater to thermalize the grown part of a single crystal below the hot zone, which is a technique unavailable in common mirror furnaces. The high quality of the single crystals was verified by Laue diffraction and the internal strain was documented by neutron diffraction. The absorption spectrum corresponds with the parameters of the commercially used material produced by Czochralski method. The presented methodology for the single crystal growth by floating zone method with laser heating is applicable for the preparation of other high-quality single crystals of oxide-based materials, particularly in an oxidizing environment unattainable in commonly used crucible methods.
△ Less
Submitted 15 December, 2022;
originally announced December 2022.
-
Incorporation of the Ce3+ activator ions in LaAlO3 crystals: EPR and NMR study
Authors:
V. Laguta,
M. Buryi,
J. Pejchal,
K. Uličná,
V. Římal,
V. Chlan,
H. Štěpánková,
Yu. Zagorodniy,
M. Nikl
Abstract:
This work reports the results of EPR and NMR study of the Ce3+ incorporation in LaAlO3 single crystals grown by the micro-pulling-down method in the range of the Ce concentrations from x=0.1 at.% up to 100 at.%. From EPR measurements, Ce3+ g tensor parameters were obtained as function of Ce concentration. The g tensor has orthorhombic symmetry even in the trigonal phase (x < 10 at.%) suggesting th…
▽ More
This work reports the results of EPR and NMR study of the Ce3+ incorporation in LaAlO3 single crystals grown by the micro-pulling-down method in the range of the Ce concentrations from x=0.1 at.% up to 100 at.%. From EPR measurements, Ce3+ g tensor parameters were obtained as function of Ce concentration. The g tensor has orthorhombic symmetry even in the trigonal phase (x < 10 at.%) suggesting that the incorporation of Ce at La site lowers lattice symmetry near this ion. The local properties of the La1-xCexAlO3 crystals were further studied by 27Al and 139La high-resolution NMR measurements. It was found that 139La chemical shift has the Fermi contact interaction origin. It linearly increases with Ce concentration up to 165 ppm at x = 0.5. Due to this strong Fermi contact interaction, separated peaks corresponding to different Ce-O-La spin transfer passways are resolved in the 139La NMR spectra. On the other hand, no Fermi contact interaction is visible in 27Al NMR spectra. However, these spectra contain satellite peak which intensity linearly increases with increase of Ce concentration leaving position of this peak unchanged. This was interpreted as manifestation of crystal structure modification in vicinity of Ce ions in agreement with EPR data. Thus, optical properties of Ce3+ in LaAlO3 will be namely determined by the local crystal structure near this ion.
△ Less
Submitted 5 January, 2022;
originally announced January 2022.
-
Temperature dependence and quenching characteristics of (La, Gd)$_2$Si$_2$O$_7$ scintillators at various Ce concentrations
Authors:
Masao Yoshino,
Takahiko Horiai,
Tatsuki Takasugi,
Vitezslav Jary,
Martin Nikl,
Yuui Yokota,
Kei Kamada,
Yasuhiro Shoji,
Romana Kucerkova,
Akira Yoshikawa
Abstract:
We investigated the thermal stability of scintillation and the luminescence performances of (La, Gd)${}_{2}$Si${}_{2}$O${}_{7}$ single crystals at various Ce concentrations. We prepared (La${}_{0.25-x}$, Ce${}_{x}$, Gd${}_{0.75}$)${}_{2}$Si${}_{2}$O${}_{7}$ (x = 0.0001, 0.001, 0.005, 0.01, 0.02, 0.05, and 0.1; unit: molar concentration) single crystals by the Czochralski and micro-pulling-down met…
▽ More
We investigated the thermal stability of scintillation and the luminescence performances of (La, Gd)${}_{2}$Si${}_{2}$O${}_{7}$ single crystals at various Ce concentrations. We prepared (La${}_{0.25-x}$, Ce${}_{x}$, Gd${}_{0.75}$)${}_{2}$Si${}_{2}$O${}_{7}$ (x = 0.0001, 0.001, 0.005, 0.01, 0.02, 0.05, and 0.1; unit: molar concentration) single crystals by the Czochralski and micro-pulling-down methods. With increasing Ce concentration, the photoluminescence emission and photoluminescence excitation spectral bands shifted to low energies and the activation energy $\mathrm{Δ}E$ for thermal quenching decreased. For Ce $\mathrm{<}$ 0.5 at.% samples, the photoluminescence emission background value calculated in the exponential approximation started to increase at temperatures greater than 320 K, which is probably because of Ce${}^{3+}$ 5$\textit{d}$ excited-state ionization. However, the effect was weaker for the Ce $\ge $ 0.5% samples, which may indicate a comparatively larger contribution from other nonradiative relaxations. Thus the main reason for the thermal quenching of the Ce${}^{3+}$ emission in (La, Gd)${}_{2}$Si${}_{2}$O${}_{7}$ is the combination of the 5$\textit{d}$1 excited-state ionization and nonradiative relaxation via thermally excited crossover from the 5$\textit{d}$ excited state to the 4$\textit{f}$ ground state. The temperature dependence of the scintillation light yield was similar irrespective of the Ce concentration, with Ce 1.0% exhibiting the best performance within the temperature range 300 K to 450 K.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
Crystal growth and optical properties of Ce-doped (La,Y)$_2$Si$_2$O$_7$ single crystal
Authors:
Takahiko Horiai,
Juraj Paterek,
Jan Pejchal,
Marketa Jarosova,
Jan Rohlicek,
Shunsuke Kurosawa,
Takashi Hanada,
Masao Yoshino,
Akihiro Yamaji,
Satoshi Toyoda,
Hiroki Sato,
Yuji Ohashi,
Kei Kamada,
Yuui Yokota,
Akira Yoshikawa,
Martin Nikl
Abstract:
We have grown Ce-doped (La,Y)$_2$Si$_2$O$_7$ single crystal by micro-pulling-down method and investigated its optical and scintillation properties. We have successfully prepared the single crystal with (Ce$_{0.015}$La$_{0.600}$Y$_{0.385}$)$_2$Si$_2$O$_7$ composition. The observed thermal quenching process could be characterized by the quenching temperature (T50%) of 526 K and its activation energy…
▽ More
We have grown Ce-doped (La,Y)$_2$Si$_2$O$_7$ single crystal by micro-pulling-down method and investigated its optical and scintillation properties. We have successfully prepared the single crystal with (Ce$_{0.015}$La$_{0.600}$Y$_{0.385}$)$_2$Si$_2$O$_7$ composition. The observed thermal quenching process could be characterized by the quenching temperature (T50%) of 526 K and its activation energy was determined to be 0.62 eV. Further considering the thermal quenching factors, it was found that the thermal quenching was caused by at least the thermal ionization and maybe also by classical thermal quenching. The light output and scintillation decay time were evaluated to be ~12,000 photons/MeV and ~42 ns, respectively. These results indicate that (Ce$_{0.015}$La$_{0.600}$Y$_{0.385}$)$_2$Si$_2$O$_7$ has a great potential for application in scintillation materials.
△ Less
Submitted 20 April, 2021; v1 submitted 15 April, 2021;
originally announced April 2021.
-
Effect of W and Mo co-doping on the photo- and thermally stimulated luminescence and defects creation processes in Gd3(Ga,Al)5O12:Ce crystals
Authors:
S. Zazubovich,
V. Laguta,
K. Kamada,
A,
Yoshikawa,
K. Jurek,
M. Nikl
Abstract:
Photo- and thermally stimulated luminescence characteristics of Gd3(Ga,Al)5O12:Ce single crystals co-doped with W and Mo are investigated in the 85 - 510 K temperature range and compared with the corresponding characteristics of the undoped and Ce3+ - doped Gd3(Ga,Al)5O12 single crystals of similar composition. A strong effect of the W and Mo impurity ions appears in the photoluminescence spectra…
▽ More
Photo- and thermally stimulated luminescence characteristics of Gd3(Ga,Al)5O12:Ce single crystals co-doped with W and Mo are investigated in the 85 - 510 K temperature range and compared with the corresponding characteristics of the undoped and Ce3+ - doped Gd3(Ga,Al)5O12 single crystals of similar composition. A strong effect of the W and Mo impurity ions appears in the photoluminescence spectra and temperature dependences of the photoluminescence intensity, afterglow intensity and decay kinetics, thermally stimulated luminescence (TSL) intensity and TSL glow curves, excitation spectra of the TSL glow curve peaks and activation energy of their creation. The obtained results are explained by the enhancement of the intrinsic emission contribution into the luminescence spectrum of Gd3(Ga,Al)5O12:Ce,W and Gd3(Ga,Al)5O12:Ce,Mo due to a large concentration of various W - and Mo - related electron traps in these crystals and, consequently, the O- - type hole centers, as well as intrinsic crystal lattice defects (e.g., cation vacancies needed for the excess positive charge compensation of the W6+ and Mo6+ ions). The influence of the co-doping with W and Mo ions on the scintillation characteristics of Gd3(Ga,Al)5O12:Ce is discussed.
△ Less
Submitted 4 January, 2021;
originally announced January 2021.
-
Undoped and Eu, Na co-doped LiCaAlF6 scintillation crystals: paramagnetic centers, charge trapping and energy transfer properties
Authors:
M. Buryi,
V. Laguta,
V. Babin,
J. Pejchal,
M. Nikl,
A. Yoshikawa
Abstract:
Single crystals of LiCaAlF6 undoped and Eu, Na co-doped were studied by electron paramagnetic resonance, radioluminescence and thermally stimulated luminescence techniques applied in a correlated manner. The undoped samples exposed to X-ray irradiation exhibited two hole-like charge trapping centers creation, the molecular ions of the form: ClF- and F2^- - F2^- dimer. Their trap depths and frequen…
▽ More
Single crystals of LiCaAlF6 undoped and Eu, Na co-doped were studied by electron paramagnetic resonance, radioluminescence and thermally stimulated luminescence techniques applied in a correlated manner. The undoped samples exposed to X-ray irradiation exhibited two hole-like charge trapping centers creation, the molecular ions of the form: ClF- and F2^- - F2^- dimer. Their trap depths and frequency factors were determined as follows: Et1=1.7 eV and Et2=1.1. eV for trap depths and f ~ 10^13 s-1 for frequency factor, respectively. It was found that the europium preferable charge state is 2+ in the LiCaAlF6:Eu,Na samples, however, some amount of the Eu3+ is also present. Moreover, there were two Eu2+ centers: the dominating Eu2+(Ca) and the low-content Eu2+(Li). The amount of the latter is easily governed by the sodium admixture while the former is insensitive to the Na co-doping. Eu and Na co-doping affected the defects distribution and incorporation in the LiCaAlF6 host.
△ Less
Submitted 23 January, 2020;
originally announced January 2020.
-
Rare-earth ions incorporation into Lu2Si2O7 scintillator crystals: Electron paramagnetic resonance and luminescence study
Authors:
M. Buryi,
V. Laguta,
V. Babin,
O. Laguta,
M. G. Brik,
M. Nikl
Abstract:
The present work reports results of the electron paramagnetic resonance (EPR), optical absorption, radio- and photoluminescence (RL and PL) complex study of the Lu2Si2O7:Pr and Lu2Si2O7:Ce pyrosilicate crystals. In both crystals, the EPR spectra demonstrate the presence of characteristic signals originating from the Yb3+, Er3+, Nd3+, Dy3+, Gd3+ and V3+ ions existing in the material as uncontrolled…
▽ More
The present work reports results of the electron paramagnetic resonance (EPR), optical absorption, radio- and photoluminescence (RL and PL) complex study of the Lu2Si2O7:Pr and Lu2Si2O7:Ce pyrosilicate crystals. In both crystals, the EPR spectra demonstrate the presence of characteristic signals originating from the Yb3+, Er3+, Nd3+, Dy3+, Gd3+ and V3+ ions existing in the material as uncontrolled impurities. The corresponding spectra (except for Gd3+) have been analysed in detail and g- and hyperfine tensors are determined for all these ions in the lutetium pyrosilicate for the first time. Optical absorption, RL and PL measurements in the Lu2Si2O7:Pr crystal demonstrated presence of only characteristic Pr3+ transitions. In addition, the Pr3+- Pr3+ energy transfer was observed and confirmed experimentally.
△ Less
Submitted 18 January, 2020;
originally announced January 2020.
-
ToyArchitecture: Unsupervised Learning of Interpretable Models of the World
Authors:
Jaroslav Vítků,
Petr Dluhoš,
Joseph Davidson,
Matěj Nikl,
Simon Andersson,
Přemysl Paška,
Jan Šinkora,
Petr Hlubuček,
Martin Stránský,
Martin Hyben,
Martin Poliak,
Jan Feyereisl,
Marek Rosa
Abstract:
Research in Artificial Intelligence (AI) has focused mostly on two extremes: either on small improvements in narrow AI domains, or on universal theoretical frameworks which are usually uncomputable, incompatible with theories of biological intelligence, or lack practical implementations. The goal of this work is to combine the main advantages of the two: to follow a big picture view, while providi…
▽ More
Research in Artificial Intelligence (AI) has focused mostly on two extremes: either on small improvements in narrow AI domains, or on universal theoretical frameworks which are usually uncomputable, incompatible with theories of biological intelligence, or lack practical implementations. The goal of this work is to combine the main advantages of the two: to follow a big picture view, while providing a particular theory and its implementation. In contrast with purely theoretical approaches, the resulting architecture should be usable in realistic settings, but also form the core of a framework containing all the basic mechanisms, into which it should be easier to integrate additional required functionality.
In this paper, we present a novel, purposely simple, and interpretable hierarchical architecture which combines multiple different mechanisms into one system: unsupervised learning of a model of the world, learning the influence of one's own actions on the world, model-based reinforcement learning, hierarchical planning and plan execution, and symbolic/sub-symbolic integration in general. The learned model is stored in the form of hierarchical representations with the following properties: 1) they are increasingly more abstract, but can retain details when needed, and 2) they are easy to manipulate in their local and symbolic-like form, thus also allowing one to observe the learning process at each level of abstraction. On all levels of the system, the representation of the data can be interpreted in both a symbolic and a sub-symbolic manner. This enables the architecture to learn efficiently using sub-symbolic methods and to employ symbolic inference.
△ Less
Submitted 9 September, 2020; v1 submitted 20 March, 2019;
originally announced March 2019.
-
Vanadium in yttrium aluminum garnet: charge states and localization in the lattice
Authors:
V. Laguta,
M. Buryi,
A. Beitlerova,
O. Laguta,
K. Nejezchleb,
M. Nikl
Abstract:
Vanadium ions charge states and their incorporation in the yttrium aluminum garnet Y3Al5O12 (YAG) lattice were studied by the correlated optical absorption and electron paramagnetic resonance (EPR) measurements. In as-grown crystals, the occupation of the V3+ at both the octahedral and tetrahedral aluminum sites was proven. The V3+ to V4+ charge transformation was observed after annealing in air,…
▽ More
Vanadium ions charge states and their incorporation in the yttrium aluminum garnet Y3Al5O12 (YAG) lattice were studied by the correlated optical absorption and electron paramagnetic resonance (EPR) measurements. In as-grown crystals, the occupation of the V3+ at both the octahedral and tetrahedral aluminum sites was proven. The V3+ to V4+ charge transformation was observed after annealing in air, whereas annealing in the hydrogen atmosphere resulted exclusively in a slight weakening of the V3+ absorption bands due to partial recharge of these ions. Spin Hamiltonian parameters of the V3+ and V4+ ions at the tetrahedral sites including the zero field splitting and the 51V hyperfine constants have been determined using the high-frequency, up to 300 GHz, EPR measurements. From the analysis of the spin Hamiltonian parameters in the framework of the crystal field theory, the ground state energy levels splitting of the V3+ and V4+ ions were calculated. The charge distribution over the tetrahedral V3+ and its nearest oxygen surroundings was found to be strongly inhomogeneous whereas the tetrahedral V4+ ion concentrated the charge with very weak participation of surrounding ligands. Furthermore, the correlation of the optical and EPR data allowed the proper assignment of the optical absorption peaks in YAG:V crystals.
△ Less
Submitted 31 December, 2018;
originally announced December 2018.
-
Oxygen-vacancy centers in Y3Al5O12 garnet crystals: electron paramagnetic resonance and dielectric spectroscopy study
Authors:
V. Laguta,
M. Buryi,
S. Tkachenko,
P. Arhipov,
I. Gerasymov,
O. Sidletskiy,
O. Laguta,
M. Nikl
Abstract:
F+ center, an electron trapped at oxygen vacancy (VO), was investigated in the oxygen deficient Y3Al5O12 (YAG) crystals by EPR. The measurements were performed at temperatures 5-450 K and frequencies 9.4-350 GHz with using both the continue wave and pulse EPR technique. The pulse electron-nuclear double resonance was applied to resolve the hyperfine interaction of the trapped electron with surroun…
▽ More
F+ center, an electron trapped at oxygen vacancy (VO), was investigated in the oxygen deficient Y3Al5O12 (YAG) crystals by EPR. The measurements were performed at temperatures 5-450 K and frequencies 9.4-350 GHz with using both the continue wave and pulse EPR technique. The pulse electron-nuclear double resonance was applied to resolve the hyperfine interaction of the trapped electron with surrounding nuclei. The measurements show that at low temperatures, T < 50 K, EPR spectrum of the F+ center is anisotropic with g factors in the range 1.999-1.988 and originates from three magnetically inequivalent positions of the center in garnet lattice according to different directions of the Al(IV)-VO-Al(VI) chains, where Al(IV) and Al(VI) are the tetrahedral and octahedral Al sites, respectively. As the temperature increases, the EPR spectrum becomes isotropic suggesting a motional averaging of the anisotropy due to motion of electron between neighboring oxygen vacancies. With further increase of the temperature to T > 200 K, we observed delocalization of the electron into the conduction band with the activation energy about 0.4-0.5 eV that resulted in substantial narrowing of the EPR spectral line with simultaneous change of its shape from the Gaussian to Lorentzian due to diminish up to zero of the Fermi contact hyperfine field at 27Al and 89Y nuclei. Such temperature behavior of the F+-center electron in YAG is completely similar to behavior of a donor electron in a semiconductor. Our findings is further supported by measurements of the conductivity and dielectric properties. In particular, these data show that the conduction electrons are not homogeneously distributed in the crystal: there are high-conductive regions separated by poorly-conductive dielectric layers. This leads to the so-called Maxwell-Wagner dielectric relaxation with huge apparent dielectric constant at low frequencies.
△ Less
Submitted 9 January, 2019; v1 submitted 31 December, 2018;
originally announced December 2018.
-
Aluminum and Gallium Distribution in the Lu3(Al5-xGax)O12:Ce Multicomponent Garnet Scintillators Investigated by the Solid-State NMR and DFT calculations
Authors:
Yu. Zagorodniy,
V. Chlan,
H. Štěpánková,
Y. Fomichov,
J. Pejchal,
V. Laguta,
M. Nikl
Abstract:
Distribution of aluminum and gallium atoms over the tetrahedral and octahedral sites in the garnet structure was studied in the mixed Lu3Al5-xGaxO12 crystals using the 27Al and 71Ga MAS NMR together with the single crystal 71Ga NMR. The experimental study was accompanied by theoretical calculations based on the density functional theory in order to predict the tendency in substitutions of Al by Ga…
▽ More
Distribution of aluminum and gallium atoms over the tetrahedral and octahedral sites in the garnet structure was studied in the mixed Lu3Al5-xGaxO12 crystals using the 27Al and 71Ga MAS NMR together with the single crystal 71Ga NMR. The experimental study was accompanied by theoretical calculations based on the density functional theory in order to predict the tendency in substitutions of Al by Ga in the mixed garnets. Both experimental and theoretic results show a non-uniform distribution of Al and Ga over the tetrahedral and octahedral sites in the garnet structure, with strong preferences for Ga, having larger ionic radius than Al, to occupy the tetrahedral site with smaller volume in the garnet structure. The quadrupole coupling constants and chemical shift parameters for Al and Ga nuclei have been determined for all the studied compounds as well as electric field gradients at Al and Ga nuclei were calculated in the framework of the density functional theory.
△ Less
Submitted 7 January, 2018;
originally announced January 2018.
-
Hole self-trapping in the Y3Al5O12 and Lu3Al5O12 garnet crystals
Authors:
V. Laguta,
M. Buryi,
J. Pejchal,
V. Babin,
M. Nikl
Abstract:
The processes of hole localization in the Y3Al5O12 and Lu3Al5O12 single crystals were investigated by electron paramagnetic resonance (EPR) and thermally stimulated luminescence (TSL). It was found that holes created by x-ray irradiation at 77 K are predominantly self-trapped at regular oxygen ions forming O- hole center. This self-trapped hole (STH) center is thermally stable to about 100 K in bo…
▽ More
The processes of hole localization in the Y3Al5O12 and Lu3Al5O12 single crystals were investigated by electron paramagnetic resonance (EPR) and thermally stimulated luminescence (TSL). It was found that holes created by x-ray irradiation at 77 K are predominantly self-trapped at regular oxygen ions forming O- hole center. This self-trapped hole (STH) center is thermally stable to about 100 K in both YAG and LuAG crystals. At higher temperatures, thermally liberated holes are retrapped at oxygen ions in the vicinity of an acceptor ion such as Mg2+ and Al_{Y} or Al_{Lu} antisite ion that leads to increase of the thermal stability of the trapped hole to app. 150 K. TSL measurements show two composite glow peaks in the temperature range of 77 - 280 K, the temperature positions of which well correlate with the thermal stability of the O- centers. The hole thermal ionization energy was determined from a numerical fit of the TSL peaks within the model of second order kinetics. It is in the range of 0.25 - 0.26 eV for the O- STH center, and increases to 0.41 - 0.45 eV for O- center stabilized by the acceptor. Revealed O- centers can be attributed to O- small polarons formed mainly due to the hole stabilization by short-range interaction with the surrounding lattice.
△ Less
Submitted 19 December, 2017;
originally announced December 2017.
-
Influence of gallium content on Ga3+ position and photo- and thermally stimulated luminescence in Ce3+ - doped multicomponent (Y,Lu,)3GaxAl5-xO12 garnets
Authors:
V. Babin,
M. Buryi,
K. Kamada,
V. V. Laguta,
M. Nikl,
J. Pejchal,
H. Štěpánková,
A. Yoshikawa,
Y. Fomichov,
Yu. Zagorodniy,
S. Zazubovich
Abstract:
Photoluminescence, thermally stimulated luminescence (TSL) and EPR characteristics of the Ce3+ doped single crystals of multicomponent Y1Lu2GaxAl5-xO12 and Lu3GaxAl5-xO12 garnets with different Ga contents (x = 0, 1, 2, 3, 4, 5) excited in the Ce3+ - related absorption bands are investigated in the 9 - 500 K temperature range. The distribution of Ga3+ and Al3+ ions in the crystal lattice is determ…
▽ More
Photoluminescence, thermally stimulated luminescence (TSL) and EPR characteristics of the Ce3+ doped single crystals of multicomponent Y1Lu2GaxAl5-xO12 and Lu3GaxAl5-xO12 garnets with different Ga contents (x = 0, 1, 2, 3, 4, 5) excited in the Ce3+ - related absorption bands are investigated in the 9 - 500 K temperature range. The distribution of Ga3+ and Al3+ ions in the crystal lattice is determined by the NMR method. The relative number of Ga3+ ions in the tetrahedral crystal lattice sites, the maxima positions of the TSL glow curve peaks and the corresponding trap depths are found to decrease linearly with the increasing Ga content. At the same time, the reduction of the activation energy Ea of the TSL glow curve peaks creation under irradiation in the 4f - 4d1 absorption band of Ce3+ is strongly nonlinear. To explain this effect, the suggestion is made that Ea is the energy distance between the excited 5d1 level of Ce3+ and a defect level located between the 5d1 level and the bottom of the conduction band and arising from the Ga3+ ion perturbed by the nearest neighboring Ce3+ ion. The electrons thermally released from the excited Ce3+ ions are suggested to be trapped at the perturbed Ga3+ ions resulting in the appearance of electron Ga2+ centers. In spite of the fact that the paramagnetic Ga2+ ions were not detected by EPR, the described above process was found for Fe3+ impurity ions, namely the electron transfer from the 5d1 excited levels of Ce3+ to Fe3+ was directly detected by EPR.
△ Less
Submitted 19 December, 2017;
originally announced December 2017.
-
General AI Challenge - Round One: Gradual Learning
Authors:
Jan Feyereisl,
Matej Nikl,
Martin Poliak,
Martin Stransky,
Michal Vlasak
Abstract:
The General AI Challenge is an initiative to encourage the wider artificial intelligence community to focus on important problems in building intelligent machines with more general scope than is currently possible. The challenge comprises of multiple rounds, with the first round focusing on gradual learning, i.e. the ability to re-use already learned knowledge for efficiently learning to solve sub…
▽ More
The General AI Challenge is an initiative to encourage the wider artificial intelligence community to focus on important problems in building intelligent machines with more general scope than is currently possible. The challenge comprises of multiple rounds, with the first round focusing on gradual learning, i.e. the ability to re-use already learned knowledge for efficiently learning to solve subsequent problems. In this article, we will present details of the first round of the challenge, its inspiration and aims. We also outline a more formal description of the challenge and present a preliminary analysis of its curriculum, based on ideas from computational mechanics. We believe, that such formalism will allow for a more principled approach towards investigating tasks in the challenge, building new curricula and for potentially improving consequent challenge rounds.
△ Less
Submitted 17 August, 2017;
originally announced August 2017.
-
Band-gap and Band-edge Engineering of Multicomponent Garnet Scintillators: A First-principles Study
Authors:
Satyesh K. Yadav,
Blas P. Uberuaga,
Martin Nikl,
Chao Jiang,
Chris R. Stanek
Abstract:
Complex doping schemes in RE$_3$Al$_5$O$_{12}$ (RE=rare earth element) garnet compounds have recently led to pronounced improvements in scintillator performance. Specifically, by admixing lutetium and yttrium aluminate garnets with gallium and gadolinium, the band-gap was altered in a manner that facilitated the removal of deleterious electron trapping associated with cation antisite defects. Here…
▽ More
Complex doping schemes in RE$_3$Al$_5$O$_{12}$ (RE=rare earth element) garnet compounds have recently led to pronounced improvements in scintillator performance. Specifically, by admixing lutetium and yttrium aluminate garnets with gallium and gadolinium, the band-gap was altered in a manner that facilitated the removal of deleterious electron trapping associated with cation antisite defects. Here, we expand upon this initial work to systematically investigate the effect of substitutional admixing on the energy levels of band edges. Density functional theory was used to survey potential admixing candidates that modify either the conduction band minimum (CBM) or valence band maximum (VBM). We considered two sets of compositions based on Lu$_3$B$_5$O$_{12}$ where B = Al, Ga, In, As, and Sb; and RE$_3$Al$_5$O$_{12}$, where RE = Lu, Gd, Dy, and Er. We found that admixing with various RE cations does not appreciably effect the band gap or band edges. In contrast, substituting Al with cations of dissimilar ionic radii has a profound impact on the band structure. We further show that certain dopants can be used to selectively modify only the CBM or the VBM. Specifically, Ga and In decrease the band gap by lowering the CBM, while As and Sb decrease the band gap by raising the VBM. These results demonstrate a powerful approach to quickly screen the impact of dopants on the electronic structure of scintillator compounds, identifying those dopants which alter the band edges in very specific ways to eliminate both electron and hole traps responsible for performance limitations. This approach should be broadly applicable for the optimization of electronic and optical performance for a wide range of compounds by tuning the VBM and CBM.
△ Less
Submitted 5 May, 2015;
originally announced May 2015.
-
Deep trapping states in Cerium doped (Lu,Y,Gd)3(Ga,Al)5O12 single crystal scintillators
Authors:
E. Mihóková,
K. Vávrů,
K. Kamada,
V. Babin,
A. Yoshikawa,
M. Nikl
Abstract:
We study deep trapping states in Ce3+-doped garnet crystals with the composition (Lu,Y,Gd)3(Ga,Al)5O12, recently shown as having remarkably high light yield. We use thermally stimulated luminescence (TSL) technique above room temperature and determine the composition Gd3Ga3Al2O12 as the host showing the lowest concentration of traps. This host consistently manifest very low afterglow comparable to…
▽ More
We study deep trapping states in Ce3+-doped garnet crystals with the composition (Lu,Y,Gd)3(Ga,Al)5O12, recently shown as having remarkably high light yield. We use thermally stimulated luminescence (TSL) technique above room temperature and determine the composition Gd3Ga3Al2O12 as the host showing the lowest concentration of traps. This host consistently manifest very low afterglow comparable to that of the standard BGO crystal. We also perform TSL glow peak analysis based on the initial rise technique to evaluate trap depth and other characteristics associated with TSL peaks.
△ Less
Submitted 6 November, 2012;
originally announced November 2012.
-
ESR and TSL study of hole capture in PbWO_4:Mo,La and PbWO_4:Mo,Y scintillator crystals
Authors:
V. V. Laguta,
M. Nikl,
J. Rosa,
D. Savchenko,
S. Zazubovich
Abstract:
The processes of hole localization in double-doped PbWO_4:Mo,La and PbWO_4:Mo,Y single crystals have been studied by continuous wave and pulse electron spin resonance (ESR) and thermally stimulated luminescence (TSL) methods. We show that the holes created by the UV irradiation are preferably trapped at lattice oxygen ions in the vicinity of perturbing defects such as lead vacancies, impurity ions…
▽ More
The processes of hole localization in double-doped PbWO_4:Mo,La and PbWO_4:Mo,Y single crystals have been studied by continuous wave and pulse electron spin resonance (ESR) and thermally stimulated luminescence (TSL) methods. We show that the holes created by the UV irradiation are preferably trapped at lattice oxygen ions in the vicinity of perturbing defects such as lead vacancies, impurity ions (La, Y, Mo), and other lattice imperfections. This leads to a variety of O^- centers, which differ both by thermal stability (from about 170 K up to 240 K) and ESR parameters. The hole centers of this type were not observed neither in PbWO_4:Mo nor in PbWO_4:La(Y) crystals. The recombination processes of thermally released holes with electrons stored at different traps, including Pb^+ - WO_3 and (MoO_4)^3- centers, are systematically studied by TSL. Thermal stability parameters are defined by ESR and TSL techniques for different O^- type defects.
△ Less
Submitted 30 December, 2011;
originally announced January 2012.
-
Time-resolved spectroscopy of exciton states in single crystals, single crystalline films and powders of YAlO_3 and YAlO_3:Ce
Authors:
V. Babin,
L. Grigorjeva,
I. Kondakova,
T. Kärner,
V. V. Laguta,
M. Nikl,
K. Smits,
S. Zazubovich,
Yu. Zorenko
Abstract:
Luminescence characteristics of single crystals (SC), single crystalline films (SCF), powders and ceramics of YAlO_3 and YAlO_3:Ce have been studied at 4.2-300 K under photoexcitation in the 4-20 eV energy range and X-ray excitation. The origin and structure of defects responsible for various exciton-related emission and excitation bands have been identified. The ~5.6 eV emission of YAlO_3 SCF is…
▽ More
Luminescence characteristics of single crystals (SC), single crystalline films (SCF), powders and ceramics of YAlO_3 and YAlO_3:Ce have been studied at 4.2-300 K under photoexcitation in the 4-20 eV energy range and X-ray excitation. The origin and structure of defects responsible for various exciton-related emission and excitation bands have been identified. The ~5.6 eV emission of YAlO_3 SCF is ascribed to the self-trapped excitons. In YAlO_3 SC, the dominating 5.63 eV and 4.12 eV emissions are ascribed to the excitons localized at the isolated antisite defect Y^{3+}_Al and at the Y^{3+}_{Al} defect associated with the nearest-neighbouring oxygen vacancy, respectively. Thermally stimulated release of electrons, trapped at these defects, takes place at 200 K and 280 K, respectively. The formation energies of various Y^{3+}_{Al}-related defects are calculated. The presence of Y_{Al} antisite-related defects is confirmed by NMR measurements. The influence of various intrinsic and impurity defects on the luminescence characteristics of Ce^{3+} centers is clarified.
△ Less
Submitted 3 January, 2011;
originally announced January 2011.
-
Electron Spin Resonance investigation of undoped and Li-doped CdWO_4 scintillator crystals
Authors:
V. V. Laguta,
M. Nikl,
M. Buryi
Abstract:
Electron spin resonance (ESR) spectra of Fe3+ and Mn2+ ions have been studied in the nominally pure and 0.05% Li-doped single crystals of CdWO4. The zero-field splitting parameters are determined with a high precision for both of the impurities. The result suggest that the Li-doping leads to the increase of the ionic charge of iron from 3+ to 4+ and of manganese, from 1+ to 2+.
Electron spin resonance (ESR) spectra of Fe3+ and Mn2+ ions have been studied in the nominally pure and 0.05% Li-doped single crystals of CdWO4. The zero-field splitting parameters are determined with a high precision for both of the impurities. The result suggest that the Li-doping leads to the increase of the ionic charge of iron from 3+ to 4+ and of manganese, from 1+ to 2+.
△ Less
Submitted 25 May, 2009;
originally announced May 2009.
-
Slow relaxation, confinement, and solitons
Authors:
L. S. Schulman,
E. Mihokova,
A. Scardicchio,
P. Facchi,
M. Nikl,
K. Polak,
B. Gaveau
Abstract:
Millisecond crystal relaxation has been used to explain anomalous decay in doped alkali halides. We attribute this slowness to Fermi-Pasta-Ulam solitons. Our model exhibits confinement of mechanical energy released by excitation. Extending the model to long times is justified by its relation to solitons, excitations previously proposed to occur in alkali halides. Soliton damping and observation…
▽ More
Millisecond crystal relaxation has been used to explain anomalous decay in doped alkali halides. We attribute this slowness to Fermi-Pasta-Ulam solitons. Our model exhibits confinement of mechanical energy released by excitation. Extending the model to long times is justified by its relation to solitons, excitations previously proposed to occur in alkali halides. Soliton damping and observation are also discussed.
△ Less
Submitted 26 September, 2001;
originally announced September 2001.