-
Two-dimensional few-atom noble gas clusters in a graphene sandwich
Authors:
Manuel Längle,
Kenichiro Mizohata,
Clemens Mangler,
Alberto Trentino,
Kimmo Mustonen,
E. Harriet Åhlgren,
Jani Kotakoski
Abstract:
Van der Waals atomic solids of noble gases on metals at cryogenic temperatures were the first experimental examples of two-dimensional systems. Recently such structures have also been created on surfaces under encapsulation by graphene, allowing studies at elevated temperatures through scanning tunneling microscopy. However, for this technique, the encapsulation layer often obscures the actual arr…
▽ More
Van der Waals atomic solids of noble gases on metals at cryogenic temperatures were the first experimental examples of two-dimensional systems. Recently such structures have also been created on surfaces under encapsulation by graphene, allowing studies at elevated temperatures through scanning tunneling microscopy. However, for this technique, the encapsulation layer often obscures the actual arrangement of the noble gas atoms. Here, we create Kr and Xe clusters in between two suspended graphene layers, and uncover their atomic structure through direct imaging with transmission electron microscopy. We show that small crystals (N<9) arrange as expected based on the simple non-directional van der Waals interaction. Crystals larger than this show some deviations for the outermost atoms, possibly enabled by deformations in the encapsulating graphene lattice. We further discuss the dynamics of the clusters within the graphene sandwich, and show that while all Xe clusters with up to N~100 remain solid, Kr clusters with already N~16 turn occasionally fluid under our experimental conditions with an estimated pressure of ca. 0.3 GPa. This study opens a way for the so-far unexplored frontier of encapsulated two-dimensional van der Waals solids with exciting possibilities for fundamental condensed matter physics research and possible applications in quantum information technology.
△ Less
Submitted 18 August, 2023; v1 submitted 27 June, 2023;
originally announced June 2023.
-
Interface effects on titanium growth on graphene
Authors:
Georg Zagler,
Alberto Trentino,
Kimmo Mustonen,
Clemens Mangler,
Jani Kotakoski
Abstract:
Poor quality interfaces between metal and graphene cause non-linearity and impair the carrier mobility in graphene devices. Here, we use aberration corrected scanning transmission electron microscopy to observe hexagonally close-packed Ti nano-islands grown on atomically clean graphene, and establish a 30° epitaxial relationship between the lattices. Due to the strong binding of Ti on graphene, at…
▽ More
Poor quality interfaces between metal and graphene cause non-linearity and impair the carrier mobility in graphene devices. Here, we use aberration corrected scanning transmission electron microscopy to observe hexagonally close-packed Ti nano-islands grown on atomically clean graphene, and establish a 30° epitaxial relationship between the lattices. Due to the strong binding of Ti on graphene, at the limit of a monolayer, the Ti lattice constant is mediated by the graphene epitaxy, and compared to bulk Ti, is strained by ca. 3.7% to a value of 0.306(3) nm. The resulting interfacial strain is slightly greater than what has been predicted by density functional theory calculations. Our early growth stage investigations also reveal that, in contrast to widespread assumptions, Ti does not fully wet graphene but grows initially in clusters with a thickness of 1-2 layers. Raman spectroscopy implies charge transfer between the Ti islands and graphene substrate.
△ Less
Submitted 10 August, 2023; v1 submitted 20 April, 2022;
originally announced April 2022.
-
Indirect measurement of the carbon adatom migration barrier on graphene
Authors:
Andreas Postl,
Pit Pascal Patrick Hilgert,
Alexander Markevich,
Jacob Madsen,
Kimmo Mustonen,
Jani Kotakoski,
Toma Susi
Abstract:
Although surface diffusion is critical for many physical and chemical processes, including the epitaxial growth of crystals and heterogeneous catalysis, it is particularly challenging to directly study. Here, we estimate the carbon adatom migration barrier on freestanding monolayer graphene by quantifying its temperature-dependent electron knock-on damage. Due to the fast healing of vacancies by d…
▽ More
Although surface diffusion is critical for many physical and chemical processes, including the epitaxial growth of crystals and heterogeneous catalysis, it is particularly challenging to directly study. Here, we estimate the carbon adatom migration barrier on freestanding monolayer graphene by quantifying its temperature-dependent electron knock-on damage. Due to the fast healing of vacancies by diffusing adatoms, the damage rate decreases with increasing temperature. By analyzing the observed damage rates at 300-1073 K using a model describing our finite scanning probe, we find a barrier of (0.33 \pm 0.03) eV.
△ Less
Submitted 9 February, 2022;
originally announced February 2022.
-
Graphene Lattices with Embedded Transition-Metal Atoms and Tunable Magnetic Anisotropy Energy: Implications for Spintronic Devices
Authors:
Rostislav Langer,
Kimmo Mustonen,
Alexander Markevich,
Michal Otyepka,
Toma Susi,
Piotr Błoński
Abstract:
Doping of the graphene lattice with transition metal atoms resulting in high magnetic anisotropy energy (MAE) is an important goal of materials research owing to its potential application in spintronics. In this article, by using spin-polarized density functional theory including spin-orbit coupling, we examined magnetic properties of graphene with vacancy defects, both bare and nitrogen-decorated…
▽ More
Doping of the graphene lattice with transition metal atoms resulting in high magnetic anisotropy energy (MAE) is an important goal of materials research owing to its potential application in spintronics. In this article, by using spin-polarized density functional theory including spin-orbit coupling, we examined magnetic properties of graphene with vacancy defects, both bare and nitrogen-decorated, and doped by Cr, Mn and Fe transition metal single atom (TM-SA) and two different TM atoms simultaneously. [...] The computational findings are supplemented by an atomic-resolution characterization of an incidental Mn impurity bonded to four carbon atoms, whose localized spin matches expectations as measured using core-level electron energy-loss spectroscopy. Conducting TM-doped graphene with robust magnetic features offers prospects for the design of graphene-based spintronic devices.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
Towards Exotic Layered Materials: 2D Cuprous Iodide
Authors:
Kimmo Mustonen,
Christoph Hofer,
Peter Kotrusz,
Alexander Markevich,
Martin Hulman,
Clemens Mangler,
Toma Susi,
Timothy J. Pennycook,
Karol Hricovini,
Christine M. Richter,
Jannik C. Meyer,
Jani Kotakoski,
Viera Skakalova
Abstract:
Heterostructures composed of two-dimensional (2D) materials are already opening many new possibilities in such fields of technology as electronics and magnonics, but far more could be achieved if the number and diversity of 2D materials is increased. So far, only a few dozen 2D crystals have been extracted from materials that exhibit a layered phase in ambient conditions, omitting entirely the lar…
▽ More
Heterostructures composed of two-dimensional (2D) materials are already opening many new possibilities in such fields of technology as electronics and magnonics, but far more could be achieved if the number and diversity of 2D materials is increased. So far, only a few dozen 2D crystals have been extracted from materials that exhibit a layered phase in ambient conditions, omitting entirely the large number of layered materials that may exist in other temperatures and pressures. Here, we demonstrate how these structures can be stabilized in 2D van der Waals stacks under room temperature via growing them directly in graphene encapsulation by using graphene oxide as the template material. Specifically, we produce an ambient stable 2D structure of copper and iodine, a material that normally only occurs in layered form at elevated temperatures between 645 and 675 K. Our results establish a route to the production of more exotic phases of materials that would otherwise be difficult or impossible to stabilize for experiments in ambient.
△ Less
Submitted 3 December, 2021; v1 submitted 17 September, 2021;
originally announced September 2021.
-
Picometer-precision few-tilt ptychotomography of 2D materials
Authors:
Christoph Hofer,
Kimmo Mustonen,
Viera Skakalova,
Timothy J. Pennycook
Abstract:
From ripples to defects, edges and grain boundaries, the 3D atomic structure of 2D materials is critical to their properties. However the damage inflicted by conventional 3D analysis precludes its use with fragile 2D materials, particularly for the analysis of local defects. Here we dramatically increase the potential for precise local 3D atomic structure analysis of 2D materials, with both greatl…
▽ More
From ripples to defects, edges and grain boundaries, the 3D atomic structure of 2D materials is critical to their properties. However the damage inflicted by conventional 3D analysis precludes its use with fragile 2D materials, particularly for the analysis of local defects. Here we dramatically increase the potential for precise local 3D atomic structure analysis of 2D materials, with both greatly improved dose efficiency and sensitivity to light elements. We demonstrate light atoms can now be located in complex 2D materials with picometer precision at doses 30 times lower than previously possible. Moreover we demonstrate this using a material, WS$_2$, in which the light S atoms are in fact practically invisible to conventional methods. The key advance is combining the concept of few tilt tomography with highly dose efficient ptychography in scanning transmission electron microscopy. We further demonstrate the method experimentally with the even more challenging and newly discovered 2D CuI, leveraging a new extremely high temporal resolution camera.
△ Less
Submitted 21 June, 2022; v1 submitted 10 August, 2021;
originally announced August 2021.
-
Highly Efficient Bilateral Doping of Single-Walled Carbon Nanotubes
Authors:
Anastasia E. Goldt,
Orysia T. Zaremba,
Mikhail O. Bulavskiy,
Fedor S. Fedorov,
Konstantin V. Larionov,
Alexey P. Tsapenko,
Zakhar I. Popov,
Pavel Sorokin,
Anton S. Anisimov,
Heena Inani,
Jani Kotakoski,
Kimmo Mustonen,
Albert G. Nasibulin
Abstract:
A boost in the development of flexible and wearable electronics facilitates the design of new materials to be applied as transparent conducting films (TCFs). Although single-walled carbon nanotube (SWCNT) films are the most promising candidates for flexible TCFs, they still do not meet optoelectronic requirements demanded their successful industrial integration. In this study, we proposed and thor…
▽ More
A boost in the development of flexible and wearable electronics facilitates the design of new materials to be applied as transparent conducting films (TCFs). Although single-walled carbon nanotube (SWCNT) films are the most promising candidates for flexible TCFs, they still do not meet optoelectronic requirements demanded their successful industrial integration. In this study, we proposed and thoroughly investigated a new approach that comprises simultaneous bilateral (outer and inner surfaces) SWCNT doping after their opening by thermal treatment at 400 C under an ambient air atmosphere. Doping by a chloroauric acid (HAuCl$_{4}$) ethanol solution allowed us to achieve the record value of sheet resistance of 31 $\pm$ 4 $Ω$/sq at a transmittance of 90% in the middle of visible spectra (550 nm). The strong p-doping was examined by open-circuit potential (OCP) measurements and confirmed by ab initio calculations demonstrating a downshift of Fermi level around 1 eV for the case of bilateral doping.
△ Less
Submitted 1 April, 2021;
originally announced April 2021.
-
Single indium atoms and few-atom indium clusters anchored onto graphene via silicon heteroatoms
Authors:
Kenan Elibol,
Clemens Mangler,
David D. O'Regan,
Kimmo Mustonen,
Dominik Eder,
Jannik C. Meyer,
Jani Kotakoski,
Richard G. Hobbs,
Toma Susi,
Bernhard C. Bayer
Abstract:
Single atoms and few-atom nanoclusters are of high interest in catalysis and plasmonics, but pathways for their fabrication and stable placement remain scarce. We report here the self-assembly of room-temperature-stable single indium (In) atoms and few-atom In clusters (2-6 atoms) that are anchored to substitutional silicon (Si) impurity atoms in suspended monolayer graphene membranes. Using atomi…
▽ More
Single atoms and few-atom nanoclusters are of high interest in catalysis and plasmonics, but pathways for their fabrication and stable placement remain scarce. We report here the self-assembly of room-temperature-stable single indium (In) atoms and few-atom In clusters (2-6 atoms) that are anchored to substitutional silicon (Si) impurity atoms in suspended monolayer graphene membranes. Using atomically resolved scanning transmission electron microscopy (STEM), we find that the exact atomic arrangements of the In atoms depend strongly on the original coordination of the Si anchors in the graphene lattice: Single In atoms and In clusters with 3-fold symmetry readily form on 3-fold coordinated Si atoms, whereas 4-fold symmetric clusters are found attached to 4-fold coordinated Si atoms. All structures are produced by our fabrication route without the requirement for electron-beam induced materials modification. In turn, when activated by electron beam irradiation in the STEM, we observe in situ the formation, restructuring and translation dynamics of the Si-anchored In structures: Hexagon-centered 4-fold symmetric In clusters can (reversibly) transform into In chains or In dimers, whereas C-centered 3-fold symmetric In clusters can move along the zig-zag direction of the graphene lattice due to the migration of Si atoms during electron-beam irradiation, or transform to Si-anchored single In atoms. Our results provide a novel framework for the controlled self-assembly and heteroatomic anchoring of single atoms and few-atom clusters on graphene.
△ Less
Submitted 31 August, 2020;
originally announced September 2020.
-
Gas-phase synthesis of carbon nanotube-graphene heterostructures
Authors:
Saeed Ahmad,
Hua Jiang,
Kimmo Mustonen,
Qiang Zhang,
Aqeel Hussain,
Abu Taher Khan,
Nan Wei,
Mohammad Tavakkoli,
Yongping Liao,
Er-Xiong Ding,
Jani Kotakoski,
Esko I. Kauppinen
Abstract:
Graphene and carbon nanotubes (CNTs) share the same atomic structure of hexagonal carbon lattice. Yet, their synthesis differs in many aspects, including the shape and size of the catalyst. Here, we demonstrate a floating-catalyst chemical vapor deposition (FCCVD) technique for substrate-free, single-step growth of CNT-graphene heterostructures (CNT-G-H) using ethylene as a carbon source. The form…
▽ More
Graphene and carbon nanotubes (CNTs) share the same atomic structure of hexagonal carbon lattice. Yet, their synthesis differs in many aspects, including the shape and size of the catalyst. Here, we demonstrate a floating-catalyst chemical vapor deposition (FCCVD) technique for substrate-free, single-step growth of CNT-graphene heterostructures (CNT-G-H) using ethylene as a carbon source. The formation of CNT-G-H is directly evidenced by lattice-resolved (scanning) transmission electron microscopy (STEM) and electron diffraction experiments, corroborated by atomic force microscopy (AFM). Our experiments show the relative number density of graphene-nanoflakes can be tuned by optimizing the synthesis conditions. Since in the applied process the formation of the structures take place in gas-suspension, the as-synthesized CNT-G-H films can be deposited on any surface in ambient temperature with an arbitrary thickness. Moreover, this process of CNT-G-H synthesis with strong universality has also been realized in multiple systems of ethylene-based FCCVD with various catalysts and set-ups.
△ Less
Submitted 17 April, 2019;
originally announced April 2019.
-
Enhanced Tunnelling in a Hybrid of Single-Walled Carbon Nanotubes and Graphene
Authors:
Yongping Liao,
Kimmo Mustonen,
Semir Tulic,
Viera Skakalova,
Sabbir A. Khan,
Patrik Laiho,
Qiang Zhang,
Changfeng Li,
Mohammad R. A. Monazam,
Jani Kotakoski,
Harri Lipsanen,
Esko I. Kauppinen
Abstract:
Transparent and conductive films (TCFs) are of great technological importance. The high transmittance, electrical conductivity and mechanical strength make single-walled carbon nanotubes (SWCNTs) a good candidate for their raw material. Despite the ballistic transport in individual SWCNTs, however, the electrical conductivity of their networks is limited by low efficiency of charge tunneling betwe…
▽ More
Transparent and conductive films (TCFs) are of great technological importance. The high transmittance, electrical conductivity and mechanical strength make single-walled carbon nanotubes (SWCNTs) a good candidate for their raw material. Despite the ballistic transport in individual SWCNTs, however, the electrical conductivity of their networks is limited by low efficiency of charge tunneling between the tube elements. Here, we demonstrate that the nanotube network sheet resistance at high optical transmittance is decreased by more than 50% when fabricated on graphene and thus provides a comparable improvement as widely adopted gold chloride ($\mathrm{AuCl_3}$) doping. However, while Raman spectroscopy reveals substantial changes in spectral features of doped nanotubes, no similar effect is observed in presence of graphene. Instead, temperature dependent transport measurements indicate that graphene substrate reduces the tunneling barrier heights while its parallel conductivity contribution is almost negligible. Finally, we show that combining the graphene substrate and $\mathrm{AuCl_3}$ doping, the SWCNT thin films can exhibit sheet resistance as low as 36 $Ω$/sq. at 90% transmittance.
△ Less
Submitted 15 March, 2019;
originally announced March 2019.
-
Electron-Beam Manipulation of Silicon Impurities in Single-Walled Carbon Nanotubes
Authors:
Kimmo Mustonen,
Alexander Markevich,
Mukesh Tripathi,
Heena Inani,
Er-Xiong Ding,
Aqeel Hussain,
Clemens Mangler,
Esko I. Kauppinen,
Jani Kotakoski,
Toma Susi
Abstract:
The recent discovery that impurity atoms in crystals can be manipulated with focused electron irradiation has opened novel perspectives for top-down atomic engineering. These achievements have been enabled by advances in electron optics and microscope stability, but also in the preparation of suitable materials with impurity elements incorporated via ion and electron-beam irradiation or chemical m…
▽ More
The recent discovery that impurity atoms in crystals can be manipulated with focused electron irradiation has opened novel perspectives for top-down atomic engineering. These achievements have been enabled by advances in electron optics and microscope stability, but also in the preparation of suitable materials with impurity elements incorporated via ion and electron-beam irradiation or chemical means. Here it is shown that silicon heteroatoms introduced via plasma irradiation into the lattice of single-walled carbon nanotubes (SWCNTs) can be manipulated using a focused 55-60 keV electron probe aimed at neighboring carbon sites. Moving the silicon atom mainly along the longitudinal axis of large 2.7 nm diameter tubes, more than 90 controlled lattice jumps were recorded and the relevant displacement cross sections estimated. Molecular dynamics simulations show that even in 2 nm SWCNTs the threshold energies for out-of-plane dynamics are different than in graphene, and depend on the orientation of the silicon-carbon bond with respect to the electron beam as well as the local bonding of the displaced carbon atom and its neighbors. Atomic-level engineering of SWCNTs where the electron wave functions are more strictly confined than in two-dimensional materials may enable the fabrication of tunable electronic resonators and other devices.
△ Less
Submitted 11 February, 2019;
originally announced February 2019.
-
Si Substitution in Nanotubes and Graphene via Intermittent Vacancies
Authors:
Heena Inani,
Kimmo Mustonen,
Alexander Markevich,
Er-Xiong Ding,
Mukesh Tripathi,
Aqeel Hussain,
Clemens Mangler,
Esko I. Kauppinen,
Toma Susi,
Jani Kotakoski
Abstract:
The properties of single-walled carbon nanotubes (SWCNTs) and graphene can be modified by the presence of covalently bound impurities. Although this can be achieved by introducing chemical additives during synthesis, that often hinders growth and leads to limited crystallite size and quality. Here, through the simultaneous formation of vacancies with low-energy argon plasma and the thermal activat…
▽ More
The properties of single-walled carbon nanotubes (SWCNTs) and graphene can be modified by the presence of covalently bound impurities. Although this can be achieved by introducing chemical additives during synthesis, that often hinders growth and leads to limited crystallite size and quality. Here, through the simultaneous formation of vacancies with low-energy argon plasma and the thermal activation of adatom diffusion by laser irradiation, silicon impurities are incorporated into the lattice of both materials. After an exposure of $\sim$1 ion/nm$^{2}$, we find Si substitution densities of 0.15 nm$^{-2}$ in graphene and 0.05 nm$^{-2}$ in nanotubes, as revealed by atomically resolved scanning transmission electron microscopy. In good agreement with predictions of Ar irradiation effects in SWCNTs, we find Si incorporated in both mono- and divacancies, with $\sim$2/3 being of the first type. Controlled inclusion of impurities in the quasi-1D and 2D carbon lattices may prove useful for applications such as gas sensing, and a similar approach might also be used to substitute other elements with migration barriers lower than that of carbon.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
Intrinsic core level photoemission of suspended graphene
Authors:
Toma Susi,
Mattia Scardamaglia,
Kimmo Mustonen,
Andreas Mittelberger,
Mohamed Al-Hada,
Matteo Amati,
Hikmet Sezen,
Patrick Zeller,
Ask H. Larsen,
Clemens Mangler,
Jannik C. Meyer,
Luca Gregoratti,
Carla Bittencourt,
Jani Kotakoski
Abstract:
X-ray photoelectron spectroscopy of graphene is important both for its characterization and as a model for other carbon materials. Despite great recent interest, the intrinsic photoemission of its single layer has not been unambiguously measured, nor is the layer-dependence in free-standing multilayers accurately determined. We combine scanning transmission electron microscopy and Raman spectrosco…
▽ More
X-ray photoelectron spectroscopy of graphene is important both for its characterization and as a model for other carbon materials. Despite great recent interest, the intrinsic photoemission of its single layer has not been unambiguously measured, nor is the layer-dependence in free-standing multilayers accurately determined. We combine scanning transmission electron microscopy and Raman spectroscopy with synchrotron-based scanning photoelectron microscopy to characterize the same areas of suspended graphene samples down to the atomic level. This allows us to assign spectral signals to regions of precisely known layer number and purity. The core level binding energy of the monolayer is measured at 284.70 eV, thus 0.28 eV higher than that of graphite, with intermediate values found for few layers. This trend is reproduced by density functional theory with or without explicit van der Waals interactions, indicating that intralayer charge rearrangement dominates, but in our model of static screening the magnitudes of the shifts are underestimated by half.
△ Less
Submitted 31 July, 2018;
originally announced July 2018.
-
Buckyball sandwiches
Authors:
Rasim Mirzayev,
Kimmo Mustonen,
Mohammad R. A. Monazam,
Andreas Mittelberger,
Timothy J. Pennycook,
Clemens Mangler,
Toma Susi,
Jani Kotakoski,
Jannik C. Meyer
Abstract:
Two-dimensional (2D) materials have considerably expanded the field of materials science in the last decade. Even more recently, various 2D materials have been assembled into vertical van der Waals heterostacks, and it has been proposed to combine them with other low- dimensional structures to create new materials with hybridized properties. Here, we demonstrate the first direct images of a suspen…
▽ More
Two-dimensional (2D) materials have considerably expanded the field of materials science in the last decade. Even more recently, various 2D materials have been assembled into vertical van der Waals heterostacks, and it has been proposed to combine them with other low- dimensional structures to create new materials with hybridized properties. Here, we demonstrate the first direct images of a suspended 0D/2D heterostructure incorporating $C_{60}$ molecules between two graphene layers in a buckyball sandwich structure. We find clean and ordered $C_{60}$ islands with thicknesses down to one molecule, shielded by the graphene layers from the microscope vacuum and partially protected from radiation damage during scanning transmission electron microscopy imaging. The sandwich structure serves as a 2D nanoscale reaction chamber allowing the analysis of the structure of the molecules and their dynamics at atomic resolution.
△ Less
Submitted 19 June, 2017;
originally announced June 2017.
-
Cleaning graphene: comparing heat treatments in air and in vacuum
Authors:
Mukesh Tripathi,
Andreas Mittelberger,
Kimmo Mustonen,
Clemens Mangler,
Jani Kotakoski,
Jannik C. Meyer,
Toma Susi
Abstract:
Surface impurities and contamination often seriously degrade the properties of two-dimensional materials such as graphene. To remove contamination, thermal annealing is commonly used. We present a comparative analysis of annealing treatments in air and in vacuum, both ex situ and "pre-situ", where an ultra-high vacuum treatment chamber is directly connected to an aberration-corrected scanning tran…
▽ More
Surface impurities and contamination often seriously degrade the properties of two-dimensional materials such as graphene. To remove contamination, thermal annealing is commonly used. We present a comparative analysis of annealing treatments in air and in vacuum, both ex situ and "pre-situ", where an ultra-high vacuum treatment chamber is directly connected to an aberration-corrected scanning transmission electron microscope. While ex situ treatments do remove contamination, it is challenging to obtain atomically clean surfaces after ambient transfer. However, pre-situ cleaning with radiative or laser heating appears reliable and well suited to clean graphene without undue damage to its structure.
△ Less
Submitted 26 April, 2017;
originally announced April 2017.
-
Uncovering the ultimate performance of single-walled carbon nanotube films as transparent conductors
Authors:
Kimmo Mustonen,
Patrik Laiho,
Antti Kaskela,
Toma Susi,
Albert G. Nasibulin,
Esko I. Kauppinen
Abstract:
The ultimate performance - ratio of electrical conductivity to optical absorbance - of single- walled carbon nanotube (SWCNTs) transparent conductive films (TCFs) is an issue of considerable application relevance. Here, we present direct experimental evidence that SWCNT bundling is detrimental for their performance. We combine floating catalyst synthesis of non-bundled, high-quality SWCNTs with an…
▽ More
The ultimate performance - ratio of electrical conductivity to optical absorbance - of single- walled carbon nanotube (SWCNTs) transparent conductive films (TCFs) is an issue of considerable application relevance. Here, we present direct experimental evidence that SWCNT bundling is detrimental for their performance. We combine floating catalyst synthesis of non-bundled, high-quality SWCNTs with an aggregation chamber, in which bundles with mean diameters ranging from 1.38 to 2.90 nm are formed from identical 3 microns long SWCNTs. The as-deposited TCFs from 1.38 nm bundles showed sheet resistances of 310 Ohms/sq. at 90% transparency, while those from larger bundles of 1.80 and 2.90 nm only reached values of 475 and 670 Ohms/sq., respectively. Based on these observations, we elucidate how networks formed by smaller bundles perform better due to their greater interconnectivity at a given optical density. Finally, we present a semi-empirical model for TCF performance as a function of SWCNT mean length and bundle diameter. This gives an estimate for the ultimate performance of non-doped, random network mixed-metallicity SWCNT TCFs at ~80 Ohms/sq. and 90% transparency.
△ Less
Submitted 29 January, 2016;
originally announced January 2016.
-
Gas phase synthesis of non-bundled, small diameter single-walled carbon nanotubes with near-armchair chiralities
Authors:
Kimmo Mustonen,
Patrik Laiho,
Antti Kaskela,
Zhen Zhu,
Olivier Reynaud,
Nikolay Houbenov,
Ying Tian,
Toma Susi,
Hua Jiang,
Albert G. Nasibulin,
Esko I. Kauppinen
Abstract:
We present a novel floating catalyst synthesis route for individual, i.e. non-bundled, small diameter single-walled carbon nanotubes (SWCNTs) with a narrow chiral angle distribution peaking at high chiralities near the armchair species. An ex situ spark discharge generator was used to form iron particles with geometric number mean diameters of 3-4 nm and fed into a laminar flow chemical vapour dep…
▽ More
We present a novel floating catalyst synthesis route for individual, i.e. non-bundled, small diameter single-walled carbon nanotubes (SWCNTs) with a narrow chiral angle distribution peaking at high chiralities near the armchair species. An ex situ spark discharge generator was used to form iron particles with geometric number mean diameters of 3-4 nm and fed into a laminar flow chemical vapour deposition reactor for the continuous synthesis of long and high-quality SWCNTs from ambient pressure carbon monoxide. The intensity ratio of G/D peaks in Raman spectra up to 48 and mean tube lengths up to 4 microns were observed. The chiral distributions, as directly determined by electron diffraction in the transmission electron microscope, clustered around the (n,m) indices (7,6), (8,6), (8,7) and (9,6), with up to 70% of tubes having chiral angles over 20°. The mean diameter of SWCNTs was reduced from 1.10 to 1.04 nm by decreasing the growth temperature from 880 to 750 °C, which simultaneously increased the fraction of semiconducting tubes from 67 to 80%. Limiting the nanotube gas phase number concentration to approx. 100 000 per cubic centimetre successfully prevented nanotube bundle formation that is due to collisions induced by Brownian diffusion. Up to 80 % of 500 as-deposited tubes observed by atomic force and transmission electron microscopy were individual. Transparent conducting films deposited from these SWCNTs exhibited record low sheet resistances of 63 Ohms/sq. at 90 % transparency for 550 nm light.
△ Less
Submitted 29 January, 2016;
originally announced January 2016.