-
Approaching the Intrinsic Properties of Moiré Structures Using Atomic Force Microscopy Ironing
Authors:
Swaroop Kumar Palai,
Mateusz Dyksik,
Nikodem Sokolowski,
Mariusz Ciorga,
Estrella Sánchez Viso,
Yong Xie,
Alina Schubert,
Takashi Taniguchi,
Kenji Watanabe,
Duncan K. Maude,
Alessandro Surrente,
Michał Baranowski,
Andres Castellanos-Gomez,
Carmen Munuera,
Paulina Plochocka
Abstract:
Stacking monolayers of transition metal dichalcogenides (TMDs) has led to the discovery of a plethora of new exotic phenomena, resulting from moiré pattern formation. Due to the atomic thickness and high surface-to-volume ratio of heterostructures, the interfaces play a crucial role. Fluctuations in the interlayer distance affect interlayer coupling and moiré effects. Therefore, to access the intr…
▽ More
Stacking monolayers of transition metal dichalcogenides (TMDs) has led to the discovery of a plethora of new exotic phenomena, resulting from moiré pattern formation. Due to the atomic thickness and high surface-to-volume ratio of heterostructures, the interfaces play a crucial role. Fluctuations in the interlayer distance affect interlayer coupling and moiré effects. Therefore, to access the intrinsic properties of the TMD stack, it is essential to obtain a clean and uniform interface between the layers. Here, we show that this is achieved by ironing with the tip of an atomic force microscope. This post-stacking procedure dramatically improves the homogeneity of the interfaces, which is reflected in the optical response of the interlayer exciton. We demonstrate that ironing improves the layer coupling, enhancing moiré effects and reducing disorder. This is crucial for the investigation of TMD heterostructure physics, which currently suffers from low reproducibility.
△ Less
Submitted 16 October, 2024;
originally announced October 2024.
-
Strong electrostatic control of excitonic features in MoS$_2$ by a free-standing ultrahigh-$κ$ ferroelectric perovskite
Authors:
Thomas Pucher,
Sergio Puebla,
Victor Zamora,
Estrella Sánchez Viso,
Victor Rouco,
Carlos Leon,
Mar Garcia-Hernandez,
Jacobo Santamaria,
Carmen Munuera,
Andres Castellanos-Gomez
Abstract:
We present the electrostatic control of photoluminescence of monolayer MoS$_2$ at room temperature via integration of free-standing BaTiO$_3$ (BTO), a ferroelectric perovskite oxide, layers. We show that the use of BTO leads to highly tunable exciton emission of MoS$_2$ in a minimal range of gate voltages, effectively controlling the neutral excitons to charged excitons (trions) conversion. Due to…
▽ More
We present the electrostatic control of photoluminescence of monolayer MoS$_2$ at room temperature via integration of free-standing BaTiO$_3$ (BTO), a ferroelectric perovskite oxide, layers. We show that the use of BTO leads to highly tunable exciton emission of MoS$_2$ in a minimal range of gate voltages, effectively controlling the neutral excitons to charged excitons (trions) conversion. Due to BTO's ferroelectric polarization-induced doping we observe large peak emission shifts as well as a large and tunable A trion binding energy in the range of 40-100 meV. To further investigate the efficacy of electrostatic control, we compared our measurements with those carried out when the BTO is replaced by a hexagonal boron nitride (hBN) dielectric layer of comparable thickness, confirming BTO's superior gating properties and thus lower power consumption. Additionally, we take advantage of the ferroelectric switching of BTO by fabricating devices where the BTO layer is decoupled from the gate electrode with a SiO$_2$ layer. Choosing to isolate the BTO allows us to induce large remanent behavior of MoS$_2$'s excitonic features, observing hysteretic behavior in the peak energy ratio between A exciton and its trion, as well as hysteretic behavior in the doping-related trion energy shift. This study illustrates the rich physics involved in combining free-standing complex oxide layers with two-dimensional materials.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Locally recoverable codes from the matrix-product construction
Authors:
Carlos Galindo,
Fernando Hernando,
Carlos Munuera,
Diego Ruano
Abstract:
Matrix-product constructions giving rise to locally recoverable codes are considered, both the classical $r$ and $(r,δ)$ localities. We study the recovery advantages offered by the constituent codes and also by the defining matrices of the matrix product codes. Finally, we extend these methods to a particular variation of matrix-product codes and quasi-cyclic codes. Singleton-optimal locally recov…
▽ More
Matrix-product constructions giving rise to locally recoverable codes are considered, both the classical $r$ and $(r,δ)$ localities. We study the recovery advantages offered by the constituent codes and also by the defining matrices of the matrix product codes. Finally, we extend these methods to a particular variation of matrix-product codes and quasi-cyclic codes. Singleton-optimal locally recoverable codes and almost Singleton-optimal codes, with length larger than the finite field size, are obtained, some of them with superlinear length.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
A 2D ferroelectric vortex lattice in twisted BaTiO3 freestanding layers
Authors:
Gabriel Sanchez-Santolino,
Victor. Rouco,
Sergio. Puebla,
Hugo Aramberri,
Victor Zamora,
Fabian A. Cuellar,
Carmen Munuera,
Federico Mompean,
Mar Garcia-Hernandez,
Aandres Castellanos-Gomez,
Jorge Iniguez,
Carlos Leon,
Jacobo Santamaria
Abstract:
The wealth of complex polar topologies recently found in nanoscale ferroelectrics result from a delicate balance between the materials intrinsic tendency to develop a homogeneous polarization and the electric and mechanic boundary conditions imposed upon them. Ferroelectric dielectric interfaces are model systems where polarization curling originates from open circuit like electric boundary condit…
▽ More
The wealth of complex polar topologies recently found in nanoscale ferroelectrics result from a delicate balance between the materials intrinsic tendency to develop a homogeneous polarization and the electric and mechanic boundary conditions imposed upon them. Ferroelectric dielectric interfaces are model systems where polarization curling originates from open circuit like electric boundary conditions, to avoid the build-up of polarization charges through the formation of flux closure domains that evolve into vortex like structures at the nanoscale. Interestingly, while ferroelectricity is known to couple strongly to strain (both homogeneous and inhomogeneous), the effect of mechanical constraints on thin film nanoscale ferroelectrics has been comparatively less explored because of the relative paucity of strain patterns that can be implemented experimentally. Here we show that the stacking of freestanding ferroelectric perovskite layers with controlled twist angles opens an unprecedented opportunity to tailor these topological nanostructures in a way determined by the lateral strain modulation associated to the twisting. Interestingly, we find that a peculiar pattern of polarization vortices and antivortices emerges from the flexoelectric coupling of polarization to strain gradients. This finding opens exciting opportunities to create two-dimensional high density vortex crystals that would allow us to explore novel physical effects and functionalities.
△ Less
Submitted 11 January, 2023;
originally announced January 2023.
-
Band structure, superconductivity and polytypism in AuSn$_4$
Authors:
Edwin Herrera,
Beilun Wu,
Evan O'Leary,
Alberto M. Ruiz,
Miguel Águeda,
Pablo García Talavera,
Víctor Barrena,
Jon Azpeitia,
Carmen Munuera,
Mar García Hernández,
Lin-Lin Wang,
Adam Kaminski,
Paul C. Canfield,
José Baldoví,
Isabel Guillamón,
Hermann Suderow
Abstract:
The orthorhombic compound AuSn4 is compositionally similar to the Dirac node arc semimetal PtSn$_4$. AuSn$_4$ is, contrary to PtSn$_4$, superconducting with a critical temperature of T$_c$ = 2.35 K. Recent measurements present indications for quasi two-dimensional superconducting behavior in AuSn$_4$. Here we present measurements of the superconducting density of states and the band structure of A…
▽ More
The orthorhombic compound AuSn4 is compositionally similar to the Dirac node arc semimetal PtSn$_4$. AuSn$_4$ is, contrary to PtSn$_4$, superconducting with a critical temperature of T$_c$ = 2.35 K. Recent measurements present indications for quasi two-dimensional superconducting behavior in AuSn$_4$. Here we present measurements of the superconducting density of states and the band structure of AuSn$_4$ through Scanning Tunneling Microscopy (STM) and Angular Resolved Photoemission Spectroscopy (ARPES). The superconducting gap values in different portions of the Fermi surface are spread around Δ0 = 0.4 meV, which is close to but somewhat larger than $Δ=$ 1.76kBT$_c$ expected from BCS theory. We observe superconducting features in the tunneling conductance at the surface up to temperatures about 20% larger than bulk Tc. The band structure calculated with Density Functional Theory (DFT) follows well the results of ARPES. The crystal structure presents two possible stackings of Sn layers, giving two nearly degenerate polytypes. This makes AuSn$_4$ a rather unique case with a three dimensional electronic band structure but properties ressembling those of low dimensional layered compounds.
△ Less
Submitted 15 February, 2023; v1 submitted 20 May, 2022;
originally announced May 2022.
-
Magnetic domain wall pinning in cobalt ferrite microstructures
Authors:
Sandra Ruiz-Gómez,
Anna Mandziak,
Laura Martín-García,
Jose Emilio Prieto,
Pilar Prieto,
Carmen Munuera,
Michael Foerster,
Adrián Quesda,
Lucía Aballe,
Juan de la Figuera
Abstract:
A detailed correlative structural, magnetic and chemical analysis of non-stoichiometric cobalt ferrite micrometric crystals was performed by x-ray magnetic circular dichroism combined with photoemission microscopy, low energy electron microscopy, and atomic force microscopy. The vector magnetization at the nanoscale is obtained from magnetic images at different x-ray incidence angles and compared…
▽ More
A detailed correlative structural, magnetic and chemical analysis of non-stoichiometric cobalt ferrite micrometric crystals was performed by x-ray magnetic circular dichroism combined with photoemission microscopy, low energy electron microscopy, and atomic force microscopy. The vector magnetization at the nanoscale is obtained from magnetic images at different x-ray incidence angles and compared with micromagnetic simulations, revealing the presence of defects which pin the magnetic domain walls. A comparison of different types of defects and the domain walls location suggests that the main source of pinning in these microcrystals are linear structural defects induced in the spinel by the substrate steps underneath the islands.
△ Less
Submitted 12 January, 2022;
originally announced January 2022.
-
In-plane anisotropic optical and mechanical properties of two-dimensional MoO$_3$
Authors:
Sergio Puebla,
Roberto D'Agosta,
Gabriel Sanchez-Santolino,
Riccardo Frisenda,
Carmen Munuera,
Andres Castellanos-Gomez
Abstract:
Molybdenum trioxide (MoO$_3$) in-plane anisotropy has increasingly attracted the attention of the scientific community in the last few years. Many of the observed in-plane anisotropic properties stem from the anisotropic refractive index and elastic constants of the material but a comprehensive analysis of these fundamental properties is still lacking. Here we employ Raman and micro-reflectance me…
▽ More
Molybdenum trioxide (MoO$_3$) in-plane anisotropy has increasingly attracted the attention of the scientific community in the last few years. Many of the observed in-plane anisotropic properties stem from the anisotropic refractive index and elastic constants of the material but a comprehensive analysis of these fundamental properties is still lacking. Here we employ Raman and micro-reflectance measurements, using polarized light, to determine the angular dependence of the refractive index of thin MoO$_3$ flakes and we study the directional dependence of the MoO$_3$ Young's modulus using the buckling metrology method. We found that MoO$_3$ displays one of the largest in-plane anisotropic mechanical properties reported for 2D materials so far.
△ Less
Submitted 7 May, 2021;
originally announced May 2021.
-
Integrating van der Waals materials on paper substrates for electrical and optical applications
Authors:
Wenliang Zhang,
Qinghua Zhao,
Carmen Munuera,
Martin Lee,
Eduardo Flores,
João E. F. Rodrigues,
Jose R. Ares,
Carlos Sanchez,
Javier Gainza,
Herre S. J. van der Zant,
José A. Alonso,
Isabel J. Ferrer,
Tao Wang,
Riccardo Frisenda,
Andres Castellanos-Gomez
Abstract:
Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (v…
▽ More
Paper holds the promise to replace silicon substrates in applications like internet of things or disposable electronics that require ultra-low-cost electronic components and an environmentally friendly electronic waste management. In the last years, spurred by the abovementioned properties of paper as a substrate and the exceptional electronic, mechanical and optical properties of van der Waals (vdW) materials, many research groups have worked towards the integration of vdW materials-based devices on paper. Recently, a method to deposit a continuous film of densely packed interconnects of vdW materials on paper by simply rubbing the vdW crystals against the rough surface of paper has been presented. This method utilizes the weak interlayer vdW interactions and allows cleaving of the crystals into micro platelets through the abrasion against the paper. Here, we aim to illustrate the general character and the potential of this technique by fabricating films of 39 different vdW materials (including superconductors, semi-metals, semiconductors, and insulators) on standard copier paper. We have thoroughly characterized their optical properties showing their high optical quality: one can easily resolve the absorption band edge of semiconducting vdW materials and even the excitonic features present in some vdW materials with high exciton binding energy. We also measured the electrical resistivity for several vdW materials films on paper finding exceptionally low values, which are in some cases, orders of magnitude lower than those reported for analogous films produced by inkjet printing. We finally demonstrate the fabrication of field-effect devices with vdW materials on paper using the paper substrate as an ionic gate.
△ Less
Submitted 7 May, 2021;
originally announced May 2021.
-
An Algorithmic Approach to Entanglement-Assisted Quantum Error-Correcting Codes from the Hermitian Curve
Authors:
René Bødker Christensen,
Carlos Munuera,
Francisco Revson F. Pereira,
Diego Ruano
Abstract:
We study entanglement-assisted quantum error-correcting codes (EAQECCs) arising from classical one-point algebraic geometry codes from the Hermitian curve with respect to the Hermitian inner product. Their only unknown parameter is $c$, the number of required maximally entangled quantum states since the Hermitian dual of an AG code is unknown. In this article, we present an efficient algorithmic a…
▽ More
We study entanglement-assisted quantum error-correcting codes (EAQECCs) arising from classical one-point algebraic geometry codes from the Hermitian curve with respect to the Hermitian inner product. Their only unknown parameter is $c$, the number of required maximally entangled quantum states since the Hermitian dual of an AG code is unknown. In this article, we present an efficient algorithmic approach for computing $c$ for this family of EAQECCs. As a result, this algorithm allows us to provide EAQECCs with excellent parameters over any field size.
△ Less
Submitted 11 January, 2022; v1 submitted 5 May, 2021;
originally announced May 2021.
-
Optical-based thickness measurement of MoO$_3$ nanosheets
Authors:
Sergio Puebla,
Antonio Mariscal-Jiménez,
Rosalía Serna Galán,
Carmen Munuera,
Andres Castellanos-Gomez
Abstract:
Considering that two-dimensional (2D) molybdenum trioxide has acquired more attention in the last few years, it is relevant to speed up thickness identification of this material. We provide two fast and non-destructive methods to evaluate the thickness of MoO$_3$ flakes on SiO$_2$/Si substrates. First, by means of quantitative analysis of the apparent color of the flakes in optical microscopy imag…
▽ More
Considering that two-dimensional (2D) molybdenum trioxide has acquired more attention in the last few years, it is relevant to speed up thickness identification of this material. We provide two fast and non-destructive methods to evaluate the thickness of MoO$_3$ flakes on SiO$_2$/Si substrates. First, by means of quantitative analysis of the apparent color of the flakes in optical microscopy images, one can make a first approximation of the thickness with an uncertainty of $\pm3$ nm. The second method is based on the fit of optical contrast spectra, acquired with micro-reflectance measurements, to a Fresnel law-based model that provides an accurate measurement of the flake thickness with $\pm2$ nm of uncertainty.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
Locally recoverable $J$-affine variety codes
Authors:
Carlos Galindo,
Fernando Hernando,
Carlos Munuera
Abstract:
A locally recoverable (LRC) code is a code over a finite field $\mathbb{F}_q$ such that any erased coordinate of a codeword can be recovered from a small number of other coordinates in that codeword. We construct LRC codes correcting more than one erasure, which are subfield-subcodes of some $J$-affine variety codes. For these LRC codes, we compute localities $(r, δ)$ that determine the minimum si…
▽ More
A locally recoverable (LRC) code is a code over a finite field $\mathbb{F}_q$ such that any erased coordinate of a codeword can be recovered from a small number of other coordinates in that codeword. We construct LRC codes correcting more than one erasure, which are subfield-subcodes of some $J$-affine variety codes. For these LRC codes, we compute localities $(r, δ)$ that determine the minimum size of a set $\bar{R}$ of positions so that any $δ- 1$ erasures in $\bar{R}$ can be recovered from the remaining $r$ coordinates in this set. We also show that some of these LRC codes with lengths $n\gg q$ are $(δ-1)$-optimal.
△ Less
Submitted 11 March, 2020; v1 submitted 18 November, 2019;
originally announced November 2019.
-
Tailored Graphenic Structures Directly Grown on Titanium Oxide Boost the Interfacial Charge Transfer
Authors:
Roberto Munoz,
Carlos Sanchez-Sanchez,
Pablo Merino,
Elena Lopez-Elvira,
Carmen Munuera,
Patricia Gant,
Maria F. Lopez,
Andres Castellanos-Gomez,
Jose Angel Martin-Gago,
Mar Garcia-Hernandez
Abstract:
The successful application of titanium oxide-graphene hybrids in the fields of photocatalysis, photovoltaics and photodetection strongly depends on the interfacial contact between both materials. The need to provide a good coupling between the enabling conductor and the photoactive phase prompted us to directly grow conducting graphenic structures on TiO2 crystals. We here report on the direct syn…
▽ More
The successful application of titanium oxide-graphene hybrids in the fields of photocatalysis, photovoltaics and photodetection strongly depends on the interfacial contact between both materials. The need to provide a good coupling between the enabling conductor and the photoactive phase prompted us to directly grow conducting graphenic structures on TiO2 crystals. We here report on the direct synthesis of tailored graphenic structures by using Plasma Assisted Chemical Vapour Deposition that present a clean junction with the prototypical titanium oxide (110) surface. Chemical analysis of the interface indicates chemical bonding between both materials. Photocurrent measurements under UV light illumination manifest that the charge transfer across the interface is efficient. Moreover, the influence of the synthesis atmosphere, gas precursor (C2H2) and diluents (Ar, O2), on the interface and on the structure of the as-grown graphenic material is assessed. The inclusion of O2 promotes vertical growth of partially oxidized carbon nanodots/rods with controllable height and density. The deposition with Ar results in continuous graphenic films with low resistivity (6.8x10-6 ohm x m). The synthesis protocols developed here are suitable to produce tailored carbon-semiconductor structures on a variety of practical substrates as thin films, pillars or nanoparticles.
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
Computing sharp recovery structures for Locally Recoverable codes
Authors:
Irene Marquez-Corbella,
Edgar Martinez-Moro,
Carlos Munuera
Abstract:
A locally recoverable code is an error-correcting code such that any erasure in a single coordinate of a codeword can be recovered from a small subset of other coordinates. In this article we develop an algorithm that computes a recovery structure as concise posible for an arbitrary linear code $\mathcal{C}$ and a recovery method that realizes it. This algorithm also provides the locality and the…
▽ More
A locally recoverable code is an error-correcting code such that any erasure in a single coordinate of a codeword can be recovered from a small subset of other coordinates. In this article we develop an algorithm that computes a recovery structure as concise posible for an arbitrary linear code $\mathcal{C}$ and a recovery method that realizes it. This algorithm also provides the locality and the dual distance of $\mathcal{C}$. Complexity issues are studied as well. Several examples are included.
△ Less
Submitted 11 July, 2019;
originally announced July 2019.
-
Observation of a gel of quantum vortices in a superconductor at very low magnetic fields
Authors:
José Benito Llorens,
Lior Embon,
Alexandre Correa,
Jesés David González,
Edwin Herrera,
Isabel Guillamón,
Roberto F. Luccas,
Jon Azpeitia,
Federico J. Mompeán,
Mar García-Hernández,
Carmen Munuera,
Jazmín Aragón Sánchez,
Yanina Fasano,
Milorad V. Milosevic,
Hermann Suderow,
Yonathan Anahory
Abstract:
A gel consists of a network of particles or molecules formed for example using the sol-gel process, by which a solution transforms into a porous solid. Particles or molecules in a gel are mainly organized on a scaffold that makes up a porous system. Quantized vortices in type II superconductors mostly form spatially homogeneous ordered or amorphous solids. Here we present high-resolution imaging o…
▽ More
A gel consists of a network of particles or molecules formed for example using the sol-gel process, by which a solution transforms into a porous solid. Particles or molecules in a gel are mainly organized on a scaffold that makes up a porous system. Quantized vortices in type II superconductors mostly form spatially homogeneous ordered or amorphous solids. Here we present high-resolution imaging of the vortex lattice displaying dense vortex clusters separated by sparse or entirely vortex-free regions in $β$-Bi$_2$Pd superconductor. We find that the intervortex distance diverges upon decreasing the magnetic field and that vortex lattice images follow a multifractal behavior. These properties, characteristic of gels, establish the presence of a novel vortex distribution, distinctly different from the well-studied disordered and glassy phases observed in high-temperature and conventional superconductors. The observed behavior is caused by a scaffold of one-dimensional structural defects with enhanced stress close to the defects. The vortex gel might often occur in type-II superconductors at low magnetic fields. Such vortex distributions should allow to considerably simplify control over vortex positions and manipulation of quantum vortex states.
△ Less
Submitted 18 January, 2020; v1 submitted 24 April, 2019;
originally announced April 2019.
-
Structural characterization of as-grown and quasi-free standing graphene layers on SiC
Authors:
R. A. Bueno,
I. Palacio,
C. Munuera,
L. Aballe,
M. Foerster,
W. Strupinski,
M. Garcia-Hernandez,
J. A. Martin-Gago,
M. F. Lopez
Abstract:
We report on a comparative structural characterization of two types of high quality epitaxial graphene layers grown by CVD on 4H-SiC(0001). The layers under study are a single layer graphene on top of a buffer layer and a quasi-free-standing graphene obtained by intercalation of hydrogen underneath the buffer layer. We determine the morphology and structure of both layers by different complementar…
▽ More
We report on a comparative structural characterization of two types of high quality epitaxial graphene layers grown by CVD on 4H-SiC(0001). The layers under study are a single layer graphene on top of a buffer layer and a quasi-free-standing graphene obtained by intercalation of hydrogen underneath the buffer layer. We determine the morphology and structure of both layers by different complementary in-situ and ex-situ surface techniques. We found the existence of large islands in both samples but with different size distribution. Photoemission electron microscopy (PEEM) measurements were performed to get information about the chemical environment of the different regions. The study reveals that monolayer graphene prevails in most of the surface terraces, while a bilayer and trilayer graphene presence is observed at the steps, stripes along steps and islands.
△ Less
Submitted 10 April, 2019; v1 submitted 28 February, 2019;
originally announced February 2019.
-
Locally Recoverable codes with local error detection
Authors:
Carlos Munuera
Abstract:
A locally recoverable code is an error-correcting code such that any erasure in a coordinate of a codeword can be recovered from a set of other few coordinates. In this article we introduce a model of local recoverable codes that also includes local error detection. The cases of the Reed-Solomon and Locally Recoverable Reed-Solomon codes are treated in some detail.
A locally recoverable code is an error-correcting code such that any erasure in a coordinate of a codeword can be recovered from a set of other few coordinates. In this article we introduce a model of local recoverable codes that also includes local error detection. The cases of the Reed-Solomon and Locally Recoverable Reed-Solomon codes are treated in some detail.
△ Less
Submitted 3 December, 2018;
originally announced December 2018.
-
Towards Air Stability of Ultra-Thin GaSe Devices: Avoiding Environmental and Laser-Induced Degradation by Encapsulation
Authors:
Qinghua Zhao,
Riccardo Frisenda,
Patricia Gant,
David Perez de Lara,
Carmen Munuera,
Mar Garcia-Hernandez,
Yue Niu,
Tao Wang,
Wanqi Jie,
Andres Castellanos-Gomez
Abstract:
Gallium selenide (GaSe) is a novel two-dimensional material, which belongs to the layered III-VIA semiconductors family and attracted interest recently as it displays single-photon emitters at room temperature and strong optical non-linearity. Nonetheless, few-layer GaSe is not stable under ambient conditions and it tends to degrade over time. Here we combine atomic force microscopy, Raman spectro…
▽ More
Gallium selenide (GaSe) is a novel two-dimensional material, which belongs to the layered III-VIA semiconductors family and attracted interest recently as it displays single-photon emitters at room temperature and strong optical non-linearity. Nonetheless, few-layer GaSe is not stable under ambient conditions and it tends to degrade over time. Here we combine atomic force microscopy, Raman spectroscopy and optoelectronic measurements in photodetectors based on thin GaSe to study its long-term stability. We found that the GaSe flakes exposed to air tend to decompose forming firstly amorphous selenium and Ga2Se3 and subsequently Ga2O3. While the first stage is accompanied by an increase in photocurrent, in the second stage we observe a decrease in photocurrent which leads to the final failure of GaSe photodetectors. Additionally, we found that the encapsulation of the GaSe photodetectors with hexagonal boron nitride (h-BN) can protect the GaSe from degradation and can help to achieve long-term stability of the devices.
△ Less
Submitted 15 October, 2018;
originally announced October 2018.
-
Optical contrast and refractive index of natural van der Waals heterostructure nanosheets of franckeite
Authors:
Patricia Gant,
Foad Ghasemi,
David Maeso,
Carmen Munuera,
Elena López-Elvira,
Riccardo Frisenda,
David Pérez De Lara,
Gabino Rubio-Bollinger,
Mar Garcia-Hernandez,
Andres Castellanos-Gomez
Abstract:
We study mechanically exfoliated nanosheets of franckeite by quantitative optical microscopy. The analysis of transmission mode and epi-illumination mode optical microscopy images provides a rapid method to estimate the thickness of the exfoliated flakes at first glance. A quantitative analysis of the optical contrast spectra by means of micro-reflectance allows one to determine the refractive ind…
▽ More
We study mechanically exfoliated nanosheets of franckeite by quantitative optical microscopy. The analysis of transmission mode and epi-illumination mode optical microscopy images provides a rapid method to estimate the thickness of the exfoliated flakes at first glance. A quantitative analysis of the optical contrast spectra by means of micro-reflectance allows one to determine the refractive index of franckeite in a broad range of the visible spectrum through a fit of the acquired spectra to a Fresnel law based model.
△ Less
Submitted 11 October, 2018;
originally announced October 2018.
-
Locally Recoverable codes from algebraic curves with separated variables
Authors:
Carlos Munuera,
Wanderson Tenório,
Fernando Torres
Abstract:
A Locally Recoverable code is an error-correcting code such that any erasure in a single coordinate of a codeword can be recovered from a small subset of other coordinates. We study Locally Recoverable Algebraic Geometry codes arising from certain curves defined by equations with separated variables. The recovery of erasures is obtained by means of Lagrangian interpolation in general, and simply b…
▽ More
A Locally Recoverable code is an error-correcting code such that any erasure in a single coordinate of a codeword can be recovered from a small subset of other coordinates. We study Locally Recoverable Algebraic Geometry codes arising from certain curves defined by equations with separated variables. The recovery of erasures is obtained by means of Lagrangian interpolation in general, and simply by one addition in some particular cases.
△ Less
Submitted 7 June, 2018;
originally announced June 2018.
-
Attractive interaction between superconducting vortices in tilted magnetic fields
Authors:
Alexandre Correa,
Federico Mompean,
Isabel Guillamon,
Edwin Herrera,
Mar Garcia-Hernandez,
Takashi Yamamoto,
Takanari Kashiwagi,
Kazuo Kadowaki,
Alexander I. Buzdin,
Hermann Suderow,
Carmen Munuera
Abstract:
Many practical applications of high T$_c$ superconductors involve layered materials and magnetic fields applied on an arbitrary direction with respect to the layers. When the anisotropy is very large, Cooper pair currents can circulate either within or perpendicular to the layers. Thus, tilted magnetic fields lead to intertwined lattices of Josephson and Abrikosov vortices, with quantized circulat…
▽ More
Many practical applications of high T$_c$ superconductors involve layered materials and magnetic fields applied on an arbitrary direction with respect to the layers. When the anisotropy is very large, Cooper pair currents can circulate either within or perpendicular to the layers. Thus, tilted magnetic fields lead to intertwined lattices of Josephson and Abrikosov vortices, with quantized circulation across and within layers, respectively. Transport in such intertwined lattices has been studied in detail, but direct observation and manipulation of vortices remains challenging. Here we present magnetic force microscopy experiments in tilted magnetic fields in the extremely quasi-two dimensional superconductor $Bi_{2}Sr_{2}CaCu_{2}O_{8}$. We trigger Abrikosov vortex motion in between Josephson vortices, and find that Josephson vortices in different layers can be brought on top of each other. Our measurements suggest that intertwined lattices in tilted magnetic fields can be intrinsically easy to manipulate thanks to the mutual interaction between Abrikosov and Josephson vortices.
△ Less
Submitted 20 January, 2019; v1 submitted 6 June, 2018;
originally announced June 2018.
-
Direct visualization of phase separation between superconducting and nematic domains in Co-doped CaFe2As2 close to a first order phase transition
Authors:
Antón Fente,
Alexandre Correa-Orellana,
Anna E. Böhmer,
Andreas Kreyssig,
S. Ran,
Sergey L. Bud'ko,
Paul C. Canfield,
Federico Mompeán,
Mar García-Hernández,
Carmen Munuera,
Isabel Guillamón,
Hermann Suderow
Abstract:
We show that biaxial strain induces alternating tetragonal superconducting and orthorhombic nematic domains in Co substituted CaFe2As2. We use Atomic Force, Magnetic Force and Scanning Tunneling Microscopy (AFM, MFM and STM) to identify the domains and characterize their properties, finding in particular that tetragonal superconducting domains are very elongated, more than several tens of micron l…
▽ More
We show that biaxial strain induces alternating tetragonal superconducting and orthorhombic nematic domains in Co substituted CaFe2As2. We use Atomic Force, Magnetic Force and Scanning Tunneling Microscopy (AFM, MFM and STM) to identify the domains and characterize their properties, finding in particular that tetragonal superconducting domains are very elongated, more than several tens of micron long and about 30 nm wide, have the same Tc than unstrained samples and hold vortices in a magnetic field. Thus, biaxial strain produces a phase separated state, where each phase is equivalent to what is found at either side of the first order phase transition between antiferromagnetic orthorhombic and superconducting tetragonal phases found in unstrained samples when changing Co concentration. Having such alternating superconducting domains separated by normal conducting domains with sizes of order of the coherence length opens opportunities to build Josephson junction networks or vortex pinning arrays and suggests that first order quantum phase transitions lead to nanometric size phase separation under the influence of strain.
△ Less
Submitted 5 October, 2017;
originally announced October 2017.
-
Lithography-free electrical transport measurements on 2D materials by direct microprobing
Authors:
Patricia Gant,
Yue Niu,
Simon A. Svatek,
Nicolás Agraït,
Carmen Munuera,
Mar García- Hernández,
Riccardo Frisenda,
David Perez de Lara,
Andres Castellanos-Gomez
Abstract:
We present a method to carry out electrical and opto-electronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts to the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS2 flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the cryst…
▽ More
We present a method to carry out electrical and opto-electronic measurements on 2D materials using carbon fiber microprobes to directly make electrical contacts to the 2D materials without damaging them. The working principle of this microprobing method is illustrated by measuring transport in MoS2 flakes in vertical (transport in the out-of-plane direction) and lateral (transport within the crystal plane) configurations, finding performances comparable to those reported for MoS2 devices fabricated by conventional lithographic process. We also show that this method can be used with other 2D materials.
△ Less
Submitted 20 May, 2017;
originally announced May 2017.
-
Locally Recoverable codes from rational maps
Authors:
Carlos Munuera,
Wanderson Tenório
Abstract:
We give a method to construct Locally Recoverable Error-Correcting codes. This method is based on the use of rational maps between affine spaces. The recovery of erasures is carried out by Lagrangian interpolation in general and simply by one addition in some good cases.
We give a method to construct Locally Recoverable Error-Correcting codes. This method is based on the use of rational maps between affine spaces. The recovery of erasures is carried out by Lagrangian interpolation in general and simply by one addition in some good cases.
△ Less
Submitted 1 June, 2017; v1 submitted 29 June, 2016;
originally announced June 2016.
-
Quantum error-correcting codes from Algebraic Geometry codes of Castle type
Authors:
Carlos Munuera,
Wanderson Tenório,
Fernando Torres
Abstract:
We study Algebraic Geometry codes producing quantum error-correcting codes by the CSS construction. We pay particular attention to the family of Castle codes. We show that many of the examples known in the literature in fact belong to this family of codes. We systematize these constructions by showing the common theory that underlies all of them.
We study Algebraic Geometry codes producing quantum error-correcting codes by the CSS construction. We pay particular attention to the family of Castle codes. We show that many of the examples known in the literature in fact belong to this family of codes. We systematize these constructions by showing the common theory that underlies all of them.
△ Less
Submitted 29 June, 2016; v1 submitted 25 April, 2016;
originally announced April 2016.
-
Proximity driven commensurate pinning in YBa2Cu3O7 through all-oxide magnetic nanostructures
Authors:
M. Rocci,
J. Azpeitia,
J. Trastoy A. Perez-Muñoz,
M. Cabero,
R. F. Luccas,
C. Munuera,
F. J. Mompean,
M. Garcia-Hernandez,
K. Bouzehouane,
Z. Sefrioui,
C. Leon,
A. Rivera-Calzada,
J. E. Villegas,
J. Santamaria
Abstract:
The design of artificial vortex pinning landscapes is a major goal towards large scale applications of cuprate superconductors. While disordered nanometric inclusions have shown to modify their vortex phase diagram and to produce enhancements of the critical current1,2, the effect of ordered oxide nanostructures remains essentially unexplored. This is due to the very small nanostructure size impos…
▽ More
The design of artificial vortex pinning landscapes is a major goal towards large scale applications of cuprate superconductors. While disordered nanometric inclusions have shown to modify their vortex phase diagram and to produce enhancements of the critical current1,2, the effect of ordered oxide nanostructures remains essentially unexplored. This is due to the very small nanostructure size imposed by the short coherence length, and to the technological difficulties in the nanofabrication process. Yet, the novel phenomena occurring at oxide interfaces open a wide spectrum of technological opportunities to interplay with the superconductivity in cuprates. Here we show that the unusual long range suppression of the superconductivity occurring at the interface between manganites and cuprates affects vortex nucleation and provides a novel vortex pinning mechanism. In particular, we show evidence of commensurate pinning in YBCO films with ordered arrays of LCMO ferromagnetic nanodots. Vortex pinning results from the proximity induced reduction of the condensation energy at the vicinity of the magnetic nanodots, and yields an enhanced friction between the nanodot array and the moving vortex lattice in the liquid phase. This result shows that all-oxide ordered nanostructures constitute a powerful, new route for the artificial manipulation of vortex matter in cuprates.
△ Less
Submitted 9 November, 2015;
originally announced November 2015.
-
An Introduction to Algebraic Geometry codes
Authors:
Carlos Munuera,
Wilson Olaya-León
Abstract:
We present an introduction to the theory of algebraic geometry codes. Starting from evaluation codes and codes from order and weight functions, special attention is given to one-point codes and, in particular, to the family of Castle codes.
We present an introduction to the theory of algebraic geometry codes. Starting from evaluation codes and codes from order and weight functions, special attention is given to one-point codes and, in particular, to the family of Castle codes.
△ Less
Submitted 12 May, 2015;
originally announced May 2015.
-
Improving success probability and embedding efficiency in code based steganography
Authors:
Morgan Barbier,
Carlos Munuera
Abstract:
For stegoschemes arising from error correcting codes, embedding depends on a decoding map for the corresponding code. As decoding maps are usually not complete, embedding can fail. We propose a method to ensure or increase the probability of embedding success for these stegoschemes. This method is based on puncturing codes. We show how the use of punctured codes may also increase the embedding eff…
▽ More
For stegoschemes arising from error correcting codes, embedding depends on a decoding map for the corresponding code. As decoding maps are usually not complete, embedding can fail. We propose a method to ensure or increase the probability of embedding success for these stegoschemes. This method is based on puncturing codes. We show how the use of punctured codes may also increase the embedding efficiency of the obtained stegoschemes.
△ Less
Submitted 8 February, 2013;
originally announced February 2013.
-
Wet paper codes and the dual distance in steganography
Authors:
Carlos Munuera,
Morgan Barbier
Abstract:
In 1998 Crandall introduced a method based on coding theory to secretly embed a message in a digital support such as an image. Later Fridrich et al. improved this method to minimize the distortion introduced by the embedding; a process called wet paper. However, as previously emphasized in the literature, this method can fail during the embedding step. Here we find sufficient and necessary conditi…
▽ More
In 1998 Crandall introduced a method based on coding theory to secretly embed a message in a digital support such as an image. Later Fridrich et al. improved this method to minimize the distortion introduced by the embedding; a process called wet paper. However, as previously emphasized in the literature, this method can fail during the embedding step. Here we find sufficient and necessary conditions to guarantee a successful embedding by studying the dual distance of a linear code. Since these results are essentially of combinatorial nature, they can be generalized to systematic codes, a large family containing all linear codes. We also compute the exact number of solutions and point out the relationship between wet paper codes and orthogonal arrays.
△ Less
Submitted 11 April, 2011;
originally announced April 2011.
-
On the order bounds for one-point AG codes
Authors:
Olav Geil,
Carlos Munuera,
Diego Ruano,
Fernando Torres
Abstract:
The order bound for the minimum distance of algebraic geometry codes was originally defined for the duals of one-point codes and later generalized for arbitrary algebraic geometry codes. Another bound of order type for the minimum distance of general linear codes, and for codes from order domains in particular, was given in [H. Andersen and O. Geil, Evaluation codes from order domain theory, Finit…
▽ More
The order bound for the minimum distance of algebraic geometry codes was originally defined for the duals of one-point codes and later generalized for arbitrary algebraic geometry codes. Another bound of order type for the minimum distance of general linear codes, and for codes from order domains in particular, was given in [H. Andersen and O. Geil, Evaluation codes from order domain theory, Finite Fields and their Applications 14 (2008), pp. 92-123]. Here we investigate in detail the application of that bound to one-point algebraic geometry codes, obtaining a bound $d^*$ for the minimum distance of these codes. We establish a connection between $d^*$ and the order bound and its generalizations. We also study the improved code constructions based on $d^*$. Finally we extend $d^*$ to all generalized Hamming weights.
△ Less
Submitted 3 November, 2010; v1 submitted 25 February, 2010;
originally announced February 2010.
-
The structure of algebras admitting well agreeing near weights
Authors:
Carlos Munuera,
Fernando Torres
Abstract:
We characterize algebras admitting two well agreeing near weights $ρ$ and $σ$. We show that such an algebra $R$ is an integral domain whose quotient field $\mathbf K$ is an algebraic function field of one variable. It contains two places $p, Q\in {\mathbb P}(\mathbf K)$ such that $ρ$ and $σ$ are derived from the valuations associated to $P$ and $Q$. Furthermore…
▽ More
We characterize algebras admitting two well agreeing near weights $ρ$ and $σ$. We show that such an algebra $R$ is an integral domain whose quotient field $\mathbf K$ is an algebraic function field of one variable. It contains two places $p, Q\in {\mathbb P}(\mathbf K)$ such that $ρ$ and $σ$ are derived from the valuations associated to $P$ and $Q$. Furthermore $\bar R= \cap_{S\in\{\mathbb P}(\mathbf F)\setminus\{P,Q\}}{\mathcal O}_S$.
△ Less
Submitted 11 May, 2006;
originally announced May 2006.
-
Near orders and codes
Authors:
C. Carvalho,
C. Munuera,
E. Silva,
F. Torres
Abstract:
Hoholdt, van Lint and Pellikaan used order functions to construct codes by means of Linear Algebra and Semigroup Theory only. However, Geometric Goppa codes that can be represented by this method are mainly those based on just one point. In this paper we introduce the concept of near order function with the aim of generalize this approach in such a way that a of wider family of Geometric Goppa c…
▽ More
Hoholdt, van Lint and Pellikaan used order functions to construct codes by means of Linear Algebra and Semigroup Theory only. However, Geometric Goppa codes that can be represented by this method are mainly those based on just one point. In this paper we introduce the concept of near order function with the aim of generalize this approach in such a way that a of wider family of Geometric Goppa codes can be studied on a more elementary setting.
△ Less
Submitted 2 March, 2006;
originally announced March 2006.
-
Bounding the trellis state complexity of algebraic geometric codes
Authors:
Carlos Munuera,
Fernando Torres
Abstract:
Let C be an algebraic geometric code of dimension k and length n constructed on a curve X over $F_q$. Let s(C) be the state complexity of C and set w(C):=min{k,n-k}, the Wolf upper bound on s(C). We introduce a numerical function R that depends on the gonality sequence of X and show that s(C)\geq w(C)-R(2g-2), where g is the genus of X. As a matter of fact, R(2g-2)\leq g-(γ_2-2) with γ_2 being t…
▽ More
Let C be an algebraic geometric code of dimension k and length n constructed on a curve X over $F_q$. Let s(C) be the state complexity of C and set w(C):=min{k,n-k}, the Wolf upper bound on s(C). We introduce a numerical function R that depends on the gonality sequence of X and show that s(C)\geq w(C)-R(2g-2), where g is the genus of X. As a matter of fact, R(2g-2)\leq g-(γ_2-2) with γ_2 being the gonality over F_q of X, and thus in particular we have that s(C)\geq w(C)-g+γ_2-2.
△ Less
Submitted 8 March, 2003;
originally announced March 2003.
-
A Goppa-like bound on the trellis state complexity of algebraic geometric codes
Authors:
Carlos Munuera,
Fernando Torres
Abstract:
For a linear code $\cC$ of length $n$ and dimension $k$, Wolf noticed that the trellis state complexity $s(\cC)$ of $\cC$ is upper bounded by $w(\cC):=\min(k,n-k)$. In this paper we point out some new lower bounds for $s(\cC)$. In particular, if $\cC$ is an Algebraic Geometric code, then $s(\cC)\geq w(\cC)-(g-a)$, where $g$ is the genus of the underlying curve and $a$ is the abundance of the cod…
▽ More
For a linear code $\cC$ of length $n$ and dimension $k$, Wolf noticed that the trellis state complexity $s(\cC)$ of $\cC$ is upper bounded by $w(\cC):=\min(k,n-k)$. In this paper we point out some new lower bounds for $s(\cC)$. In particular, if $\cC$ is an Algebraic Geometric code, then $s(\cC)\geq w(\cC)-(g-a)$, where $g$ is the genus of the underlying curve and $a$ is the abundance of the code.
△ Less
Submitted 3 December, 2002;
originally announced December 2002.
-
On the parameters of Algebraic Geometry codes related to Arf semigroups
Authors:
A. Campillo,
J. I. Farran,
C. Munuera
Abstract:
In this paper we compute the order (or Feng-Rao) bound on the minimum distance of one-point algebraic geometry codes, when the Weierstrass semigroup at the point Q is an Arf semigroup. The results developed to that purpose also provide the dimension of the improved geometric Goppa codes related to those.
In this paper we compute the order (or Feng-Rao) bound on the minimum distance of one-point algebraic geometry codes, when the Weierstrass semigroup at the point Q is an Arf semigroup. The results developed to that purpose also provide the dimension of the improved geometric Goppa codes related to those.
△ Less
Submitted 4 November, 1999;
originally announced November 1999.