-
Current trends in the physics of nanoscale friction
Authors:
N. Manini,
G. Mistura,
G. Paolicelli,
E. Tosatti,
A. Vanossi
Abstract:
Tribology, which studies surfaces in contact and relative motion, includes friction, wear, and lubrication, straddling across different fields: mechanical engineering, materials science, chemistry, nanoscience, physics. This short review restricts to the last two disciplines, with a qualitative survey of a small number of recent progress areas in the physics of nanofriction.
Tribology, which studies surfaces in contact and relative motion, includes friction, wear, and lubrication, straddling across different fields: mechanical engineering, materials science, chemistry, nanoscience, physics. This short review restricts to the last two disciplines, with a qualitative survey of a small number of recent progress areas in the physics of nanofriction.
△ Less
Submitted 18 December, 2017;
originally announced December 2017.
-
Highly sticky surfaces made by electrospun polymer nanofibers
Authors:
S. Varagnolo,
F. Raccanello,
M. Pierno,
G. Mistura,
M. Moffa,
L. Persano,
D. Pisignano
Abstract:
We report on a comprehensive study of the unique adhesive properties of mats of polymethylmethacrylate (PMMA) nanofibers produced by electrospinning. Fibers are deposited on glass, varying the diameter and the relative orientation of the polymer filaments (random vs aligned configuration). While no significant variation is observed in the static contact angle (about 130°) of deposited water drops…
▽ More
We report on a comprehensive study of the unique adhesive properties of mats of polymethylmethacrylate (PMMA) nanofibers produced by electrospinning. Fibers are deposited on glass, varying the diameter and the relative orientation of the polymer filaments (random vs aligned configuration). While no significant variation is observed in the static contact angle (about 130°) of deposited water drops upon changing the average fiber diameter up to the micrometer scale, fibers are found to exhibit unequalled water adhesion. Placed vertically, they can hold up water drops as large as 60 microL, more than twice the values typically obtained with hairy surfaces prepared by different methods. For aligned fibers with anisotropic wetting behavior, the maximum volume measured in the direction perpendicular to the fibers goes up to 90 μL. This work suggests new routes to tailor the wetting behavior on extended areas by nanofiber coatings, with possible applications in adsorbing and catalytic surfaces, microfluidic devices, and filtration technologies.
△ Less
Submitted 18 January, 2017;
originally announced January 2017.
-
Fluidization and wall slip of soft-glassy materials by controlled surface roughness
Authors:
Ladislav Derzsi,
Daniele Filippi,
Giampaolo Mistura,
Matteo Pierno,
Matteo Lulli,
Mauro Sbragaglia,
Massimo Bernaschi,
Piotr Garstecki
Abstract:
The motion of soft-glassy materials (SGM) in a confined geometry is strongly impacted by surface roughness. However, the effect of the spatial distribution of the roughness remains poorly understood from a more quantitative viewpoint. Here we present a comprehensive study of concentrated emulsions flowing in microfluidic channels, one wall of which is patterned with micron-size equally spaced groo…
▽ More
The motion of soft-glassy materials (SGM) in a confined geometry is strongly impacted by surface roughness. However, the effect of the spatial distribution of the roughness remains poorly understood from a more quantitative viewpoint. Here we present a comprehensive study of concentrated emulsions flowing in microfluidic channels, one wall of which is patterned with micron-size equally spaced grooves oriented perpendicularly to the flow direction. We show that roughness-induced fluidization can be quantitatively tailored by systematically changing both the width and separation of the grooves. We find that a simple scaling law describes such fluidization as a function of the density of grooves, suggesting common scenarios for droplet trapping and release. Numerical simulations confirm these views and are used to elucidate the relation between fluidization and the rate of plastic rearrangements.
△ Less
Submitted 7 November, 2016;
originally announced November 2016.
-
Droplet breakup driven by shear thinning solutions in a microfluidic T-Junction
Authors:
Enrico Chiarello,
Anupam Gupta,
Giampaolo Mistura,
Mauro Sbragaglia,
Matteo Pierno
Abstract:
Droplet-based microfluidics turned out to be an efficient and adjustable platform for digital analysis, encapsulation of cells, drug formulation, and polymerase chain reaction. Typically, for most biomedical applications, the handling of complex, non-Newtonian fluids is involved, e.g. synovial and salivary fluids, collagen, and gel scaffolds. In this study we investigate the problem of droplet for…
▽ More
Droplet-based microfluidics turned out to be an efficient and adjustable platform for digital analysis, encapsulation of cells, drug formulation, and polymerase chain reaction. Typically, for most biomedical applications, the handling of complex, non-Newtonian fluids is involved, e.g. synovial and salivary fluids, collagen, and gel scaffolds. In this study we investigate the problem of droplet formation occurring in a microfluidic T-shaped junction, when the continuous phase is made of shear thinning liquids. At first, we review in detail the breakup process providing extensive, side-by-side comparisons between Newtonian and non-Newtonian liquids over unexplored ranges of flow conditions and viscous responses. The non-Newtonian liquid carrying the droplets is made of Xanthan solutions, a stiff rod-like polysaccharide displaying a marked shear thinning rheology. By defining an effective Capillary number, a simple yet effective methodology is used to account for the shear-dependent viscous response occurring at the breakup. The droplet size can be predicted over a wide range of flow conditions simply by knowing the rheology of the bulk continuous phase. Experimental results are complemented with numerical simulations of purely shear thinning fluids using Lattice Boltzmann models. The good agreement between the experimental and numerical data confirm the validity of the proposed rescaling with the effective Capillary number.
△ Less
Submitted 27 January, 2018; v1 submitted 25 October, 2016;
originally announced October 2016.
-
Size-dependent commensurability and its possible role in determining the frictional behavior of adsorbed systems
Authors:
Paolo Restuccia,
Mauro Ferrario,
Pier Luigi Sivestrelli,
Giampaolo Mistura,
Maria Clelia Righi
Abstract:
Recent nanofriction experiments of xenon on graphene revealed that the slip onset can be induced by increasing the adsorbate coverage above a critical value, which depends on temperature. Moreover, the xenon slippage on gold is much higher than on graphene in spite of the same physical nature of the interactions. To shed light on these intriguing results we have performed molecular dynamics simula…
▽ More
Recent nanofriction experiments of xenon on graphene revealed that the slip onset can be induced by increasing the adsorbate coverage above a critical value, which depends on temperature. Moreover, the xenon slippage on gold is much higher than on graphene in spite of the same physical nature of the interactions. To shed light on these intriguing results we have performed molecular dynamics simulations relying on ab initio derived potentials. By monitoring the interfacial structure factor as a function of coverage and temperature, we show that the key mechanism to interpret the observed frictional phenomena is the size-dependence of the island commensurability. The latter quantity is deeply affected also by the lattice misfit, which explains the different frictional behavior of Xe on graphene and gold.
△ Less
Submitted 25 January, 2019; v1 submitted 20 October, 2016;
originally announced October 2016.
-
Stretching of viscoelastic drops by steady sliding
Authors:
Silvia Varagnolo,
Daniele Filippi,
Giampaolo Mistura,
Matteo Pierno,
Mauro Sbragaglia
Abstract:
The sliding of non-Newtonian drops down planar surfaces results in a complex, entangled balance between interfacial forces and non linear viscous dissipation, which has been scarcely inspected. In particular, a detailed understanding of the role played by the polymer flexibility and the resulting elasticity of the polymer solution is still lacking. To this aim, we have considered polyacrylamide (P…
▽ More
The sliding of non-Newtonian drops down planar surfaces results in a complex, entangled balance between interfacial forces and non linear viscous dissipation, which has been scarcely inspected. In particular, a detailed understanding of the role played by the polymer flexibility and the resulting elasticity of the polymer solution is still lacking. To this aim, we have considered polyacrylamide (PAA) solutions of different molecular weights, suspended either in water or glycerol/water mixtures. In contrast to drops with stiff polymers, drops with flexible polymers exhibit a remarkable elongation in steady sliding. This difference is most likely attributed to different viscous bending as a consequence of different shear thinning. Moreover, an "optimal elasticity" of the polymer seems to be required for this drop elongation to be visible. We have complemented experimental results with numerical simulations of a viscoelastic FENE-P drop. This has been a decisive step to unravel how a change of the elastic parameters (e.g. polymer relaxation time, maximum extensibility) affects the dimensionless sliding velocity.
△ Less
Submitted 30 March, 2017; v1 submitted 6 October, 2016;
originally announced October 2016.
-
Deviation of viscous drops at chemical steps
Authors:
Ciro Semprebon,
Silvia Varagnolo,
Daniele Filippi,
Luca Perlini,
Matteo Pierno,
Martin Brinkmann,
Giampaolo Mistura
Abstract:
We present systematic wetting experiments and numerical simulations of gravity driven liquid drops sliding on a plane substrate decorated with a linear chemical step. Surprisingly, the optimal direction to observe crossing is not the one perpendicular to the step, but a finite angle that depends on the material parameters. We computed the landscapes of the force acting on the drop by means of a co…
▽ More
We present systematic wetting experiments and numerical simulations of gravity driven liquid drops sliding on a plane substrate decorated with a linear chemical step. Surprisingly, the optimal direction to observe crossing is not the one perpendicular to the step, but a finite angle that depends on the material parameters. We computed the landscapes of the force acting on the drop by means of a contact line mobility model showing that contact angle hysteresis dominates the dynamics at the step and determines whether the drop passes onto the lower substrate. This analysis is very well supported by the experimental dynamic phase diagram in terms of pinning, crossing, sliding and sliding followed by pinning.
△ Less
Submitted 23 March, 2016;
originally announced March 2016.
-
Sliding droplets of Xanthan solutions: a joint experimental and numerical study
Authors:
Silvia Varagnolo,
Giampaolo Mistura,
Matteo Pierno,
Mauro Sbragaglia
Abstract:
We have investigated the sliding of droplets made of solutions of Xanthan, a stiff rodlike polysaccharide exhibiting a non-newtonian behavior, notably characterized by a shear-rate dependence of the viscosity. These experimental results are quantitatively compared with those of newtonian fluids (water). The impact of the non-newtonian behavior on the sliding process was shown through the relation…
▽ More
We have investigated the sliding of droplets made of solutions of Xanthan, a stiff rodlike polysaccharide exhibiting a non-newtonian behavior, notably characterized by a shear-rate dependence of the viscosity. These experimental results are quantitatively compared with those of newtonian fluids (water). The impact of the non-newtonian behavior on the sliding process was shown through the relation between the average dimensionless velocity (i.e. the Capillary number) and the dimensionless volume forces (i.e. the Bond number). To this aim, it is needed to define operative strategies to compute the Capillary number for the shear thinning fluids and compare with the corresponding newtonian case. Results from experiments were complemented with lattice Boltzmann numerical simulations of sliding droplets, aimed to disentangle the influence that non-newtonian flow properties have on the sliding.
△ Less
Submitted 25 September, 2015;
originally announced September 2015.
-
Frictional Transition from Superlubric Islands to Pinned Monolayers
Authors:
Matteo Pierno,
Lorenzo Bruschi,
Giampaolo Mistura,
Guido Paolicelli,
Alessandro di Bona,
Sergio Valeri,
Roberto Guerra,
Andrea Vanossi,
Erio Tosatti
Abstract:
The inertial sliding of physisorbed submonolayer islands on crystal surfaces contains unexpected information on the exceptionally incommensurate smooth sliding state associated with superlubricity and on the mechanisms of its disappearance. Here we show in a joint quartz crystal microbalance (QCM) and molecular dynamics (MD) simulation case study of Xe on Cu(111) how superlubricity emerges in the…
▽ More
The inertial sliding of physisorbed submonolayer islands on crystal surfaces contains unexpected information on the exceptionally incommensurate smooth sliding state associated with superlubricity and on the mechanisms of its disappearance. Here we show in a joint quartz crystal microbalance (QCM) and molecular dynamics (MD) simulation case study of Xe on Cu(111) how superlubricity emerges in the large size limit of naturally incommensurate Xe islands. Theory also predicts, as coverage approaches a full monolayer, an abrupt adhesion-driven 2D density compression of order several %, implying here a hysteretic jump from superlubric free islands to a pressurized commensurate immobile monolayer. This scenario is fully supported by QCM data showing remarkably large slip times at increasing submonolayer coverages, signaling superlubricity, followed by a dramatic drop to zero for the dense commensurate monolayer. Careful analysis of this variety of island sliding phenomena will be mandatory in future applications of friction of crystal-adsorbate interfaces.
△ Less
Submitted 27 May, 2015;
originally announced May 2015.
-
Generation of water-in-oil and oil-in-water microdroplets in polyester-toner microfluidic devices
Authors:
Evandro Piccin,
Davide Ferraro,
Paolo Sartori,
Enrico Chiarello,
Matteo Pierno,
Giampaolo Mistura
Abstract:
This paper demonstrates that disposable polyester-toner microfluidic devices are suitable to produce either water-in-oil (W/O) or oil-in-water (O/W) droplets without using any surface treatment of the microchannels walls. Highly monodisperse W/O and O/W emulsions were generated in T-junction microdevices by simply adding appropriate surfactants to the continuous phase. The dispersion in size of dr…
▽ More
This paper demonstrates that disposable polyester-toner microfluidic devices are suitable to produce either water-in-oil (W/O) or oil-in-water (O/W) droplets without using any surface treatment of the microchannels walls. Highly monodisperse W/O and O/W emulsions were generated in T-junction microdevices by simply adding appropriate surfactants to the continuous phase. The dispersion in size of droplets generated at frequencies up to 500 Hz was always less than about 2% over time intervals of a couple of hours.
△ Less
Submitted 6 June, 2014;
originally announced June 2014.
-
Observing angular deviations in light beam reflection via weak measurements
Authors:
G. Jayaswal,
G. Mistura,
M. Merano
Abstract:
An optical analog of the quantum weak measurement scheme proved to be very useful for the observation of optical beam shifts. Here we adapt the weak value amplification method for the observation of the angular Goos-Hanchen shift. We observe this effect in the case of external air-dielectric reflection, the more fundamental case in which it occurs.We show that weak measurements allow for a faithfu…
▽ More
An optical analog of the quantum weak measurement scheme proved to be very useful for the observation of optical beam shifts. Here we adapt the weak value amplification method for the observation of the angular Goos-Hanchen shift. We observe this effect in the case of external air-dielectric reflection, the more fundamental case in which it occurs.We show that weak measurements allow for a faithful amplification of the effect at any angle of incidence, even at the Brewster angle of incidence.
△ Less
Submitted 22 May, 2014;
originally announced May 2014.
-
Observation of the Imbert-Fedorov effect via weak value amplification
Authors:
G. Jayaswal,
G. Mistura,
M. Merano
Abstract:
Weak measurements have recently allowed for the observation of the spin-Hall effect of light in reflection or transmission, which is a spin-dependent light beam shift orthogonal to the plane of incidence. We report here the observation of the Imbert-Fedorov shift via a weak value amplification scheme. The Imbert-Fedorov effect does not depend on the spin of the incident photon only, but it has ric…
▽ More
Weak measurements have recently allowed for the observation of the spin-Hall effect of light in reflection or transmission, which is a spin-dependent light beam shift orthogonal to the plane of incidence. We report here the observation of the Imbert-Fedorov shift via a weak value amplification scheme. The Imbert-Fedorov effect does not depend on the spin of the incident photon only, but it has richer polarization dependence. We prove that weak measurements allow for a complete experimental characterization of the polarization properties of this tiny optical effect.
△ Less
Submitted 19 March, 2014; v1 submitted 2 January, 2014;
originally announced January 2014.
-
Sliding drops across alternating hydrophobic and hydrophilic stripes
Authors:
M. Sbragaglia,
L. Biferale,
G. Amati,
S. Varagnolo,
D. Ferraro,
G. Mistura,
M. Pierno
Abstract:
We perform a joint numerical and experimental study to sistematically characterize the motion of drops sliding over a periodic array of alternating hydrophobic and hydrophilic stripes with large wettability contrast, and typical width of hundreds of $μ\textrm{m}$. The fraction of the hydrophobic stripes has been varied from about 20% to 80%. The effects of the heterogeneous patterning can be descr…
▽ More
We perform a joint numerical and experimental study to sistematically characterize the motion of drops sliding over a periodic array of alternating hydrophobic and hydrophilic stripes with large wettability contrast, and typical width of hundreds of $μ\textrm{m}$. The fraction of the hydrophobic stripes has been varied from about 20% to 80%. The effects of the heterogeneous patterning can be described by a renormalized value of the critical Bond number, i.e. the critical dimensionless force needed to depin the drop before it starts to move. Close to the critical Bond number we observe a jerkily motion characterized by an evident stick-slip dynamics. As a result, dissipation is strongly localized in time, and the mean velocity of the drops can easily decrease by an order of magnitude compared to the sliding on homogeneous surface. Lattice Boltzmann (LB) numerical simulations are crucial for disclosing to what extent the sliding dynamics can be deduced from the computed balance of capillary, viscous and body forces at varying the Bond number, the surface composition and the liquid viscosity. Away from the critical Bond number, we characterize both experimentally and numerically the dissipation inside the droplet by studying the relation between the average velocity and the applied volume forces.
△ Less
Submitted 14 November, 2016; v1 submitted 16 October, 2013;
originally announced October 2013.
-
Thermolubricity of Xe monolayers on graphene
Authors:
M. Pierno,
L. Bignardi,
M. C. Righi,
L. Bruschi,
S. Gottardi,
M. Stöhr,
P. L. Silvestrelli,
P. Rudolf,
G. Mistura
Abstract:
The nanofriction of Xe monolayers deposited on graphene was explored with a quartz crystal microbalance (QCM) at temperatures between 25 and 50 K. Graphene was grown by chemical vapor deposition and transferred to the QCM electrodes with a polymer stamp. At low temperatures, the Xe monolayers are fully pinned to the graphene surface. Above 30 K, the Xe film slides and the depinning onset coverage…
▽ More
The nanofriction of Xe monolayers deposited on graphene was explored with a quartz crystal microbalance (QCM) at temperatures between 25 and 50 K. Graphene was grown by chemical vapor deposition and transferred to the QCM electrodes with a polymer stamp. At low temperatures, the Xe monolayers are fully pinned to the graphene surface. Above 30 K, the Xe film slides and the depinning onset coverage beyond which the film starts sliding decreases with temperature. Similar measurements repeated on bare gold show an enhanced slippage of the Xe films and a decrease of the depinning temperature below 25 K. Nanofriction measurements of krypton and nitrogen confirm this scenario.This thermolubric behavior is explained in terms of a recent theory of the size dependence of static friction between adsorbed islands and crystalline substrates.
△ Less
Submitted 26 September, 2013;
originally announced September 2013.
-
Stick-Slip Sliding of Water Drops on Chemically Heterogeneous Surfaces
Authors:
Silvia Varagnolo,
Davide Ferraro,
Paolo Fantinel,
Matteo Pierno,
Giampaolo Mistura,
Giorgio Amati,
Luca Biferale,
Mauro Sbragaglia
Abstract:
We present a comprehensive study of water drops sliding down chemically heterogeneous surfaces formed by a periodic pattern of alternating hydrophobic and hydrophilic stripes. Drops are found to undergo a stick-slip motion whose average speed is an order of magnitude smaller than that measured on a homogeneous surface having the same static contact angle. This motion is the result of the periodic…
▽ More
We present a comprehensive study of water drops sliding down chemically heterogeneous surfaces formed by a periodic pattern of alternating hydrophobic and hydrophilic stripes. Drops are found to undergo a stick-slip motion whose average speed is an order of magnitude smaller than that measured on a homogeneous surface having the same static contact angle. This motion is the result of the periodic deformations of the drop interface when crossing the stripes. Numerical simulations confirm this view and are used to elucidate the principles underlying the experimental observations.
△ Less
Submitted 6 May, 2013;
originally announced May 2013.
-
Weak measurement of the Goos-Hanchen shift
Authors:
G. Jayaswal,
G. Mistura,
M. Merano
Abstract:
It is well known from quantum mechanics that weak measurements offer a means of amplifying and detecting very small phenomena. We present here the first experimental observation of the Goos-Hanchen shift via a weak measurement approach.
It is well known from quantum mechanics that weak measurements offer a means of amplifying and detecting very small phenomena. We present here the first experimental observation of the Goos-Hanchen shift via a weak measurement approach.
△ Less
Submitted 4 May, 2013; v1 submitted 4 January, 2013;
originally announced January 2013.
-
Observation of nonspecular effects for Gaussian Schell-model light beams
Authors:
Michele Merano,
Gabriele Umbriaco,
Giampaolo Mistura
Abstract:
We investigate experimentally the role of spatial coherence on optical beam shifts. This topic has been the subject of recent theoretical debate. We consider Gaussian Schell-model beams, with different spatial degrees of coherence, reflected at an air-glass interface. We prove that the angular Goos-Hänchen and the angular Imbert-Fedorov effects are affected by the spatial degree of coherence of th…
▽ More
We investigate experimentally the role of spatial coherence on optical beam shifts. This topic has been the subject of recent theoretical debate. We consider Gaussian Schell-model beams, with different spatial degrees of coherence, reflected at an air-glass interface. We prove that the angular Goos-Hänchen and the angular Imbert-Fedorov effects are affected by the spatial degree of coherence of the incident beam, whereas the spatial Goos-Hänchen effect does not depend on incoherence. Our data unambiguously resolve the theoretical debate in favour of one specific theory.
△ Less
Submitted 26 July, 2012;
originally announced July 2012.
-
Wetting of Argon on CO2
Authors:
Giampaolo Mistura,
Francesco Ancilotto,
Lorenzo Bruschi,
Flavio Toigo
Abstract:
We have studied the wetting transition of Ar adsorbed on solid CO2 by means of high-precision adsorption isotherms measured with a quartz microbalance. We observe triple-point wetting. At variance with many theoretical studies based on a model adsorption potential, which predict for this system a genuine prewetting transition around 100K we find that a detailed density-functional calculation emp…
▽ More
We have studied the wetting transition of Ar adsorbed on solid CO2 by means of high-precision adsorption isotherms measured with a quartz microbalance. We observe triple-point wetting. At variance with many theoretical studies based on a model adsorption potential, which predict for this system a genuine prewetting transition around 100K we find that a detailed density-functional calculation employing a more realistic adsorption potential leads to triple-point wetting of Ar on CO2, in good agreement with the experiment.
△ Less
Submitted 1 October, 1998;
originally announced October 1998.
