-
Characterizing and modeling the influence of geometry on the performance of superconducting nanowire cryotrons
Authors:
Alejandro Simon,
Reed Foster,
Owen Medeiros,
Matteo Castellani,
Emma Batson,
Karl K. Berggren
Abstract:
The scaling of superconducting nanowire-based devices to larger arrays is often limited by the cabling required to interface with each device. Cryogenic integrated circuits constructed from nanowire cryotrons, or nanocryotrons, can address this limitation by performing signal processing on chip. In this study, we characterize key performance metrics of the nanocryotron to elucidate its potential a…
▽ More
The scaling of superconducting nanowire-based devices to larger arrays is often limited by the cabling required to interface with each device. Cryogenic integrated circuits constructed from nanowire cryotrons, or nanocryotrons, can address this limitation by performing signal processing on chip. In this study, we characterize key performance metrics of the nanocryotron to elucidate its potential as a logical element in cryogenic integrated circuits and develop an electro-thermal model to connect material parameters with device performance. We find that the performance of the nanocryotron depends significantly on the device geometry, and trade-offs are associated with optimizing the gain, jitter, and energy dissipation. We demonstrate that nanocryotrons fabricated on niobium nitride can achieve a grey zone less than 210 nA wide for a 5 ns long input pulse corresponding to a maximum achievable gain of 48 dB, an energy dissipation of less than 20 aJ per operation, and a jitter of less than 60 ps.
△ Less
Submitted 25 September, 2024;
originally announced September 2024.
-
Single-photon detectors on arbitrary photonic substrates
Authors:
Max Tao,
Hugo Larocque,
Samuel Gyger,
Marco Colangelo,
Owen Medeiros,
Ian Christen,
Hamed Sattari,
Gregory Choong,
Yves Petremand,
Ivan Prieto,
Yang Yu,
Stephan Steinhauer,
Gerald L. Leake,
Daniel J. Coleman,
Amir H. Ghadimi,
Michael L. Fanto,
Val Zwiller,
Dirk Englund,
Carlos Errando-Herranz
Abstract:
Detecting non-classical light is a central requirement for photonics-based quantum technologies. Unrivaled high efficiencies and low dark counts have positioned superconducting nanowire single photon detectors (SNSPDs) as the leading detector technology for fiber and integrated photonic applications. However, a central challenge lies in their integration within photonic integrated circuits regardl…
▽ More
Detecting non-classical light is a central requirement for photonics-based quantum technologies. Unrivaled high efficiencies and low dark counts have positioned superconducting nanowire single photon detectors (SNSPDs) as the leading detector technology for fiber and integrated photonic applications. However, a central challenge lies in their integration within photonic integrated circuits regardless of material platform or surface topography. Here, we introduce a method based on transfer printing that overcomes these constraints and allows for the integration of SNSPDs onto arbitrary photonic substrates. We prove this by integrating SNSPDs and showing through-waveguide single-photon detection in commercially manufactured silicon and lithium niobate on insulator integrated photonic circuits. Our method eliminates bottlenecks to the integration of high-quality single-photon detectors, turning them into a versatile and accessible building block for scalable quantum information processing.
△ Less
Submitted 12 September, 2024;
originally announced September 2024.
-
A superconducting full-wave bridge rectifier
Authors:
Matteo Castellani,
Owen Medeiros,
Alessandro Buzzi,
Reed A. Foster,
Marco Colangelo,
Karl K. Berggren
Abstract:
Superconducting thin-film electronics are attractive for their low power consumption, fast operating speeds, and ease of interface with cryogenic systems such as single-photon detector arrays, and quantum computing devices. However, the lack of a reliable superconducting two-terminal asymmetric device, analogous to a semiconducting diode, limits the development of power-handling circuits, fundamen…
▽ More
Superconducting thin-film electronics are attractive for their low power consumption, fast operating speeds, and ease of interface with cryogenic systems such as single-photon detector arrays, and quantum computing devices. However, the lack of a reliable superconducting two-terminal asymmetric device, analogous to a semiconducting diode, limits the development of power-handling circuits, fundamental for scaling up these technologies. Existing efforts to date have been limited to single-diode proofs of principle and lacked integration of multiple controllable and reproducible devices to form complex circuits. Here, we demonstrate a robust superconducting diode with tunable polarity using the asymmetric Bean-Livingston surface barrier in niobium nitride micro-bridges, achieving a 43% rectification efficiency. We then realize and integrate several such diodes into a bridge rectifier circuit on a single microchip that performs continuous full-wave rectification up to 3 MHz and AC-to-DC conversion in burst mode at 50 MHz with an estimated peak power efficiency of 60%.
△ Less
Submitted 27 June, 2024; v1 submitted 17 June, 2024;
originally announced June 2024.
-
Parameter extraction for a superconducting thermal switch (hTron) SPICE model
Authors:
Valentin Karam,
Owen Medeiros,
Tareq El Dandachi,
Matteo Castellani,
Reed Foster,
Marco Colangelo,
Karl Berggren
Abstract:
Efficiently simulating large circuits is crucial for the broader use of superconducting nanowire-based electronics. However, current simulation tools for this technology are not adapted to the scaling of circuit size and complexity. We focus on the multilayered heater-nanocryotron (hTron), a promising superconducting nanowire-based switch used in applications such as superconducting nanowire singl…
▽ More
Efficiently simulating large circuits is crucial for the broader use of superconducting nanowire-based electronics. However, current simulation tools for this technology are not adapted to the scaling of circuit size and complexity. We focus on the multilayered heater-nanocryotron (hTron), a promising superconducting nanowire-based switch used in applications such as superconducting nanowire single-photon detector (SNSPD) readout. Previously, the hTron was modeled using traditional finite-element methods (FEM), which fall short in simulating systems at a larger scale. An empirical-based method would be better adapted to this task, enhancing both simulation speed and agreement with experimental data. In this work, we perform switching current and activation delay measurements on 17 hTron devices. We then develop a method for extracting physical fitting parameters used to characterize the devices. We build a SPICE behavioral model that reproduces the static and transient device behavior using these parameters, and validate it by comparing its performance to the model developed in a prior work, showing an improvement in simulation time by several orders of magnitude. Our model provides circuit designers with a tool to help understand the hTron's behavior during all design stages, thus promoting broader use of the hTron across various new areas of application.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Nanocryotron ripple counter integrated with a superconducting nanowire single-photon detector for megapixel arrays
Authors:
Matteo Castellani,
Owen Medeiros,
Reed A. Foster,
Alessandro Buzzi,
Marco Colangelo,
Joshua C. Bienfang,
Alessandro Restelli,
Karl K. Berggren
Abstract:
Decreasing the number of cables that bring heat into the cryostat is a critical issue for all cryoelectronic devices. Especially, arrays of superconducting nanowire single-photon detectors (SNSPDs) could require more than $10^6$ readout lines. Performing signal processing operations at low temperatures could be a solution. Nanocryotrons, superconducting nanowire three-terminal devices, are good ca…
▽ More
Decreasing the number of cables that bring heat into the cryostat is a critical issue for all cryoelectronic devices. Especially, arrays of superconducting nanowire single-photon detectors (SNSPDs) could require more than $10^6$ readout lines. Performing signal processing operations at low temperatures could be a solution. Nanocryotrons, superconducting nanowire three-terminal devices, are good candidates for integrating sensing and electronics on the same technological platform as SNSPDs in photon-counting applications. In this work, we demonstrated that it is possible to read out, process, encode, and store the output of SNSPDs using exclusively superconducting nanowires. In particular, we present the design and development of a nanocryotron ripple counter that detects input voltage spikes and converts the number of pulses to an $N$-digit value. The counting base can be tuned from 2 to higher values, enabling higher maximum counts without enlarging the circuit. As a proof-of-principle, we first experimentally demonstrated the building block of the counter, an integer-$N$ frequency divider with $N$ ranging from 2 to 5. Then, we demonstrated photon-counting operations at 405 nm and 1550 nm by coupling an SNSPD with a 2-digit nanocryotron counter partially integrated on-chip. The 2-digit counter could operate in either base 2 or base 3 with a bit error rate lower than $2 \times 10^{-4}$ and a count rate of $10^7\,$s$^{-1}$. We simulated circuit architectures for integrated readout of the counter state, and we evaluated the capabilities of reading out an SNSPD megapixel array that would collect up to $10^{12}$ counts per second. The results of this work, combined with our recent publications on a nanocryotron shift register and logic gates, pave the way for the development of nanocryotron processors, from which multiple superconducting platforms may benefit.
△ Less
Submitted 30 June, 2024; v1 submitted 23 April, 2023;
originally announced April 2023.
-
A Superconducting Nanowire Binary Shift Register
Authors:
Reed A. Foster,
Matteo Castellani,
Alessandro Buzzi,
Owen Medeiros,
Marco Colangelo,
Karl K. Berggren
Abstract:
We present a design for a superconducting nanowire binary shift register, which stores digital states in the form of circulating supercurrents in high-kinetic-inductance loops. Adjacent superconducting loops are connected with nanocryotrons, three terminal electrothermal switches, and fed with an alternating two-phase clock to synchronously transfer the digital state between the loops. A two-loop…
▽ More
We present a design for a superconducting nanowire binary shift register, which stores digital states in the form of circulating supercurrents in high-kinetic-inductance loops. Adjacent superconducting loops are connected with nanocryotrons, three terminal electrothermal switches, and fed with an alternating two-phase clock to synchronously transfer the digital state between the loops. A two-loop serial-input shift register was fabricated with thin-film NbN and achieved a bit error rate less than $10^{-4}$, operating at a maximum clock frequency of $83\,\mathrm{MHz}$ and in an out-of-plane magnetic field up to $6\,\mathrm{mT}$. A shift register based on this technology offers an integrated solution for low-power readout of superconducting nanowire single photon detector arrays, and is capable of interfacing directly with room-temperature electronics and operating unshielded in high magnetic field environments.
△ Less
Submitted 17 April, 2023; v1 submitted 9 February, 2023;
originally announced February 2023.
-
Reduced ITO for Transparent Superconducting Electronics
Authors:
Emma Batson,
Marco Colangelo,
John Simonaitis,
Eyosias Gebremeskel,
Owen Medeiros,
Mayuran Saravanapavanantham,
Vladimir Bulovic,
P. Donald Keathley,
Karl K. Berggren
Abstract:
Absorption of light in superconducting electronics is a major limitation on the quality of circuit architectures that integrate optical components with superconducting components. A 10 nm thick film of a typical superconducting material like niobium can absorb over half of any incident optical radiation. We propose instead using superconductors which are transparent to the wavelengths used elsewhe…
▽ More
Absorption of light in superconducting electronics is a major limitation on the quality of circuit architectures that integrate optical components with superconducting components. A 10 nm thick film of a typical superconducting material like niobium can absorb over half of any incident optical radiation. We propose instead using superconductors which are transparent to the wavelengths used elsewhere in the system. In this paper we investigated reduced indium tin oxide (ITO) as a potential transparent superconductor for electronics. We fabricated and characterized superconducting wires of reduced indium tin oxide. We also showed that a $\SI{10}{nm}$ thick film of the material would only absorb about 1 - 20\% of light between 500 - 1700 nm.
△ Less
Submitted 16 December, 2022;
originally announced December 2022.
-
A Nanocryotron Memory and Logic Family
Authors:
Alessandro Buzzi,
Matteo Castellani,
Reed A. Foster,
Owen Medeiros,
Marco Colangelo,
Karl K. Berggren
Abstract:
The development of superconducting electronics based on nanocryotrons has been limited so far to few-device circuits, in part due to the lack of standard and robust logic cells. Here, we introduce and experimentally demonstrate designs for a set of nanocryotron-based building blocks that can be configured and combined to implement memory and logic functions. The devices were fabricated by patterni…
▽ More
The development of superconducting electronics based on nanocryotrons has been limited so far to few-device circuits, in part due to the lack of standard and robust logic cells. Here, we introduce and experimentally demonstrate designs for a set of nanocryotron-based building blocks that can be configured and combined to implement memory and logic functions. The devices were fabricated by patterning a single superconducting layer of niobium nitride and measured in liquid helium on a wide range of operating points. The tests show $10^{-4}$ bit error rates with above $20\,\%$ margins up to $50\,$MHz and the possibility of operating under the effect of a perpendicular $36\,$mT magnetic field, with $30\,\%$ margins at $10\,$MHz. Additionally, we designed and measured an equivalent delay flip-flop made of two memory cells to show the possibility of combining multiple building blocks to make larger circuits. These blocks may constitute a solid foundation for the development of nanocryotron logic circuits and finite-state machines with potential applications in the integrated processing and control of superconducting nanowire single-photon detectors.
△ Less
Submitted 15 December, 2022;
originally announced December 2022.
-
Reversible Tuning of Superconductivity in Ion-Gated NbN Ultrathin Films by Self-Encapsulation with a High-$κ$ Dielectric Layer
Authors:
Erik Piatti,
Marco Colangelo,
Mattia Bartoli,
Owen Medeiros,
Renato S. Gonnelli,
Karl K. Berggren,
Dario Daghero
Abstract:
Ionic gating is a powerful technique for tuning the physical properties of a material via electric field-induced charge doping, but is prone to introduce extrinsic disorder and undesired electrochemical modifications in the gated material beyond pure electrostatics. Conversely, reversible, volatile and electrostatic modulation is pivotal in the reliable design and operation of novel device concept…
▽ More
Ionic gating is a powerful technique for tuning the physical properties of a material via electric field-induced charge doping, but is prone to introduce extrinsic disorder and undesired electrochemical modifications in the gated material beyond pure electrostatics. Conversely, reversible, volatile and electrostatic modulation is pivotal in the reliable design and operation of novel device concepts enabled by the ultrahigh induced charge densities attainable via ionic gating. Here we demonstrate a simple and effective method to achieve reversible and volatile gating of surface-sensitive ultrathin niobium nitride films via controlled oxidation of their surface. The resulting niobium oxide encapsulation layer exhibits a capacitance comparable to that of non-encapsulated ionic transistors, withstands gate voltages beyond the electrochemical stability window of the gate electrolyte, and enables a fully-reversible tunability of both the normal-state resistivity and the superconducting transition temperature of the encapsulated films. Our approach should be transferable to other materials and device geometries where more standard encapsulation techniques are not readily applicable.
△ Less
Submitted 12 November, 2022; v1 submitted 11 May, 2022;
originally announced May 2022.
-
Second-order finite difference approximations of the upper-convected time derivative
Authors:
Debora O. Medeiros,
Hirofumi Notsu,
Cassio M. Oishi
Abstract:
In this work, new finite difference schemes are presented for dealing with the upper-convected time derivative in the context of the generalized Lie derivative. The upper-convected time derivative, which is usually encountered in the constitutive equation of the popular viscoelastic models, is reformulated in order to obtain approximations of second-order in time for solving a simplified constitut…
▽ More
In this work, new finite difference schemes are presented for dealing with the upper-convected time derivative in the context of the generalized Lie derivative. The upper-convected time derivative, which is usually encountered in the constitutive equation of the popular viscoelastic models, is reformulated in order to obtain approximations of second-order in time for solving a simplified constitutive equation in one and two dimensions. The theoretical analysis of the truncation errors of the methods takes into account the linear and quadratic interpolation operators based on a Lagrangian framework. Numerical experiments illustrating the theoretical results for the model equation defined in one and two dimensions are included. Finally, the finite difference approximations of second-order in time are also applied for solving a two-dimensional Oldroyd-B constitutive equation subjected to a prescribed velocity field at different Weissenberg numbers.
△ Less
Submitted 5 June, 2021;
originally announced June 2021.
-
Measuring thickness in thin NbN films for superconducting devices
Authors:
Owen Medeiros,
Marco Colangelo,
Ilya Charaev,
Karl K Berggren
Abstract:
We present the use of a commercially available fixed-angle multi-wavelength ellipsometer for quickly measuring the thickness of NbN thin films for the fabrication and performance improvement of superconducting nanowire single photon detectors. The process can determine the optical constants of absorbing thin films, removing the need for inaccurate approximations. The tool can be used to observe ox…
▽ More
We present the use of a commercially available fixed-angle multi-wavelength ellipsometer for quickly measuring the thickness of NbN thin films for the fabrication and performance improvement of superconducting nanowire single photon detectors. The process can determine the optical constants of absorbing thin films, removing the need for inaccurate approximations. The tool can be used to observe oxidation growth and allows thickness measurements to be integrated into the characterization of various fabrication processes.
△ Less
Submitted 23 April, 2019; v1 submitted 13 December, 2018;
originally announced December 2018.
-
Latent solitons, black strings, black branes, and equations of state in Kaluza-Klein models
Authors:
Maxim Eingorn,
Orival R. de Medeiros,
Luís C. B. Crispino,
Alexander Zhuk
Abstract:
In Kaluza-Klein models with an arbitrary number of toroidal internal spaces, we investigate soliton solutions which describe the gravitational field of a massive compact object. We single out the physically interesting solution corresponding to a point-like mass. For the general solution we obtain equations of state in the external and internal spaces. These equations demonstrate that the point-li…
▽ More
In Kaluza-Klein models with an arbitrary number of toroidal internal spaces, we investigate soliton solutions which describe the gravitational field of a massive compact object. We single out the physically interesting solution corresponding to a point-like mass. For the general solution we obtain equations of state in the external and internal spaces. These equations demonstrate that the point-like mass soliton has dust-like equations of state in all spaces. We also obtain the PPN parameters, which give the possibility to obtain the formulas for perihelion shift, deflection of light and time delay of radar echoes. Additionally, the gravitational experiments lead to a strong restriction on the parameter of the model: $τ= -(2.1\pm 2.3)\times 10^{-5}$. The point-like mass solution contradicts this restriction. The condition $τ=0$ satisfies the experimental limitation and defines a new class of solutions which are indistinguishable from general relativity. We call such solutions latent solitons. Black strings and black branes belong to this class. Moreover, the condition of stability of the internal spaces singles out black strings/branes from the latent solitons and leads uniquely to the black string/brane equations of state $p_i=-ε/2$, in the internal spaces and to the number of the external dimensions $d_0=3$. The investigation of multidimensional static spherically symmetric perfect fluid with dust-like equation of state in the external space confirms the above results.
△ Less
Submitted 19 July, 2011; v1 submitted 20 January, 2011;
originally announced January 2011.