Showing 1–30 of 30 results for author: Mahmood, M

Polymorphism of monatomic iodine

Authors: Alexander F. Goncharov, Huawei Chen, Iskander G. Batyrev, Maxim Bykov, Lukas Brüning, Elena Bykova, Valentin Kovalev, Mohammad F. Mahmood, Mohamed Mezouar, Gaston Garbarino, Jonathan Wright

Abstract: We applied synchrotron single-crystal X-ray diffraction in a diamond anvil cell at 48-51 GPa and first-principles theoretical calculations to study the crystal structure of solid atomic iodine at high pressure. We report the synthesis of two phases of atomic iodine at 48-51 GPa via laser heating of I-N2 mixtures. Unlike the familiar monatomic I4/mmm structure, which consists of crystallographicall… ▽ More We applied synchrotron single-crystal X-ray diffraction in a diamond anvil cell at 48-51 GPa and first-principles theoretical calculations to study the crystal structure of solid atomic iodine at high pressure. We report the synthesis of two phases of atomic iodine at 48-51 GPa via laser heating of I-N2 mixtures. Unlike the familiar monatomic I4/mmm structure, which consists of crystallographically equivalent atoms, a new Pm-3n structure is of inclusion type, featuring two distinct kinds of atoms: a central detached one and peripheral ones forming the linear chains. Moreover, we observe crystallization of the familiar high-pressure face centered cubic (fcc) structure, albeit at much lower pressures compared to cold compressed iodine. The discovery of Pm-3n structure in iodine marks an important step in understanding of the pressure induced phase transition sequence in halogens. △ Less

Submitted 4 October, 2024; originally announced October 2024.

Comments: 9 pages, 6 figures in the main text. 5 supplementary figures and 1 supplementary table

Evaluation of drought tolerance of some almond genotypes by morphological, phytochemical and molecular markers in Sulaymaniyah governorate

Authors: Anwar Mohammed Raouf Mahmood

Abstract: The study was carried out during 2017 to 2019 growing seasons at four locations in Sulaimani governorate and one location in Halabja governorate, in the Iraqi Kurdistan region including SH, M, Q, B and H. A huge number almond trees were observed for all locations, among them 38 trees were selected with the best morphological characteristics which were chosen 9,3,5,7 and 14 trees depending on the l… ▽ More The study was carried out during 2017 to 2019 growing seasons at four locations in Sulaimani governorate and one location in Halabja governorate, in the Iraqi Kurdistan region including SH, M, Q, B and H. A huge number almond trees were observed for all locations, among them 38 trees were selected with the best morphological characteristics which were chosen 9,3,5,7 and 14 trees depending on the locations, respectively. A simple experiment was conducted using RCBD for this experiment and means was separated by Duncans test. In order to evaluate their tolerances to drought in glass house, an experiment was conducted at Department of Horticulture, College of Agricultural Engineering Sciences, University of Sulaimani, that seeds were taken from those genotype trees and stratified then sown in pots. A factorial RCBD experiment was used with two factors genotypes and irrigation intervals. Therefore, thirty eight seedling genotypes grown in pots under glasshouse condition were exposed to three irrigation intervals 10,20 and 40 days after 10 days from seedling emergence. Therefore, the number of treatment combinations was 114 seedlings for each replicate and with a total 342 seedlings for the whole experiment. Analysis of variance was carried out and the means were compared according to LSD 0.05. As a result of the study, the seedlings showed different levels of adaptation to drought that can be used to future breeding programs as rootstocks. The objectives of this study were to identify morphological, phytochemical and genetic diversity with relatedness among the most important almond genotypes in Sulaimani Region which related to drought tolerance to and relationship between morphological, biochemical and molecular data. △ Less

Submitted 22 September, 2024; originally announced September 2024.

MTVQA: Benchmarking Multilingual Text-Centric Visual Question Answering

Authors: Jingqun Tang, Qi Liu, Yongjie Ye, Jinghui Lu, Shu Wei, Chunhui Lin, Wanqing Li, Mohamad Fitri Faiz Bin Mahmood, Hao Feng, Zhen Zhao, Yanjie Wang, Yuliang Liu, Hao Liu, Xiang Bai, Can Huang

Abstract: Text-Centric Visual Question Answering (TEC-VQA) in its proper format not only facilitates human-machine interaction in text-centric visual environments but also serves as a de facto gold proxy to evaluate AI models in the domain of text-centric scene understanding. Nonetheless, most existing TEC-VQA benchmarks have focused on high-resource languages like English and Chinese. Despite pioneering wo… ▽ More Text-Centric Visual Question Answering (TEC-VQA) in its proper format not only facilitates human-machine interaction in text-centric visual environments but also serves as a de facto gold proxy to evaluate AI models in the domain of text-centric scene understanding. Nonetheless, most existing TEC-VQA benchmarks have focused on high-resource languages like English and Chinese. Despite pioneering works to expand multilingual QA pairs in non-text-centric VQA datasets through translation engines, the translation-based protocol encounters a substantial "visual-textual misalignment" problem when applied to TEC-VQA. Specifically, it prioritizes the text in question-answer pairs while disregarding the visual text present in images. Moreover, it fails to address complexities related to nuanced meaning, contextual distortion, language bias, and question-type diversity. In this work, we tackle multilingual TEC-VQA by introducing MTVQA, the first benchmark featuring high-quality human expert annotations across 9 diverse languages, consisting of 6,778 question-answer pairs across 2,116 images. Further, by comprehensively evaluating numerous state-of-the-art Multimodal Large Language Models (MLLMs), including GPT-4o, GPT-4V, Claude3, and Gemini, on the MTVQA dataset, it is evident that there is still a large room for performance improvement, underscoring the value of MTVQA. Additionally, we supply multilingual training data within the MTVQA dataset, demonstrating that straightforward fine-tuning with this data can substantially enhance multilingual TEC-VQA performance. We aspire that MTVQA will offer the research community fresh insights and stimulate further exploration in multilingual visual text comprehension. The project homepage is available at https://bytedance.github.io/MTVQA/. △ Less

Submitted 11 June, 2024; v1 submitted 20 May, 2024; originally announced May 2024.

Spider RIS: Mobilizing Intelligent Surfaces for Enhanced Wireless Communications

Authors: Ibrahim Yildirim, Mobeen Mahmood, Ertugrul Basar, Tho Le-Ngoc

Abstract: In this study, we introduce Spider RIS technology, which offers an innovative solution to the challenges encountered in movable antennas (MAs) and unmanned aerial vehicle (UAV)-enabled communication systems. By combining the dynamic adaptation capability of MAs and the flexible location advantages of UAVs, this technology offers a dynamic and movable RIS, which can flexibly optimize physical locat… ▽ More In this study, we introduce Spider RIS technology, which offers an innovative solution to the challenges encountered in movable antennas (MAs) and unmanned aerial vehicle (UAV)-enabled communication systems. By combining the dynamic adaptation capability of MAs and the flexible location advantages of UAVs, this technology offers a dynamic and movable RIS, which can flexibly optimize physical locations within the two-dimensional movement platform. Spider RIS aims to enhance the communication efficiency and reliability of wireless networks, particularly in obstructive environments, by elevating the signal quality and achievable rate. The motivation of Spider RIS is based on the ability to fully exploit the spatial variability of wireless channels and maximize channel capacity even with a limited number of reflecting elements by overcoming the limitations of traditional fixed RIS and energy-intensive UAV systems. Considering the geometry-based millimeter wave channel model, we present the design of a three-stage angular-based hybrid beamforming system empowered by Spider RIS: First, analog beamformers are designed using angular information, followed by the generation of digital precoder/combiner based on the effective channel observed from baseband stage. Subsequently, the joint dynamic positioning with phase shift design of the Spider RIS is optimized using particle swarm optimization, maximizing the achievable rate of the systems. △ Less

Submitted 4 May, 2024; originally announced May 2024.

Comments: Accepted in 2024 EuCNC and 6G Summit, Antwerp, Belgium, 3-6 June 2024

Designing, simulating, and performing the 100-AV field test for the CIRCLES consortium: Methodology and Implementation of the Largest mobile traffic control experiment to date

Authors: Mostafa Ameli, Sean Mcquade, Jonathan W. Lee, Matthew Bunting, Matthew Nice, Han Wang, William Barbour, Ryan Weightman, Chris Denaro, Ryan Delorenzo, Sharon Hornstein, Jon F. Davis, Dan Timsit, Riley Wagner, Rita Xu, Malaika Mahmood, Mikail Mahmood, Maria Laura Delle Monache, Benjamin Seibold, Daniel B. Work, Jonathan Sprinkle, Benedetto Piccoli, Alexandre M. Bayen

Abstract: Previous controlled experiments on single-lane ring roads have shown that a single partially autonomous vehicle (AV) can effectively mitigate traffic waves. This naturally prompts the question of how these findings can be generalized to field operational, high-density traffic conditions. To address this question, the Congestion Impacts Reduction via CAV-in-the-loop Lagrangian Energy Smoothing (CIR… ▽ More Previous controlled experiments on single-lane ring roads have shown that a single partially autonomous vehicle (AV) can effectively mitigate traffic waves. This naturally prompts the question of how these findings can be generalized to field operational, high-density traffic conditions. To address this question, the Congestion Impacts Reduction via CAV-in-the-loop Lagrangian Energy Smoothing (CIRCLES) Consortium conducted MegaVanderTest (MVT), a live traffic control experiment involving 100 vehicles near Nashville, TN, USA. This article is a tutorial for developing analytical and simulation-based tools essential for designing and executing a live traffic control experiment like the MVT. It presents an overview of the proposed roadmap and various procedures used in designing, monitoring, and conducting the MVT, which is the largest mobile traffic control experiment at the time. The design process is aimed at evaluating the impact of the CIRCLES AVs on surrounding traffic. The article discusses the agent-based traffic simulation framework created for this evaluation. A novel methodological framework is introduced to calibrate this microsimulation, aiming to accurately capture traffic dynamics and assess the impact of adding 100 vehicles to existing traffic. The calibration model's effectiveness is verified using data from a six-mile section of Nashville's I-24 highway. The results indicate that the proposed model establishes an effective feedback loop between the optimizer and the simulator, thereby calibrating flow and speed with different spatiotemporal characteristics to minimize the error between simulated and real-world data. Finally, We simulate AVs in multiple scenarios to assess their effect on traffic congestion. This evaluation validates the AV routes, thereby contributing to the execution of a safe and successful live traffic control experiment via AVs. △ Less

Submitted 23 April, 2024; originally announced April 2024.

UAV-Assisted Enhanced Coverage and Capacity in Dynamic MU-mMIMO IoT Systems: A Deep Reinforcement Learning Approach

Authors: MohammadMahdi Ghadaksaz, Mobeen Mahmood, Tho Le-Ngoc

Abstract: This study focuses on a multi-user massive multiple-input multiple-output (MU-mMIMO) system by incorporating an unmanned aerial vehicle (UAV) as a decode-and-forward (DF) relay between the base station (BS) and multiple Internet-of-Things (IoT) devices. Our primary objective is to maximize the overall achievable rate (AR) by introducing a novel framework that integrates joint hybrid beamforming (H… ▽ More This study focuses on a multi-user massive multiple-input multiple-output (MU-mMIMO) system by incorporating an unmanned aerial vehicle (UAV) as a decode-and-forward (DF) relay between the base station (BS) and multiple Internet-of-Things (IoT) devices. Our primary objective is to maximize the overall achievable rate (AR) by introducing a novel framework that integrates joint hybrid beamforming (HBF) and UAV localization in dynamic MU-mMIMO IoT systems. Particularly, HBF stages for BS and UAV are designed by leveraging slow time-varying angular information, whereas a deep reinforcement learning (RL) algorithm, namely deep deterministic policy gradient (DDPG) with continuous action space, is developed to train the UAV for its deployment. By using a customized reward function, the RL agent learns an optimal UAV deployment policy capable of adapting to both static and dynamic environments. The illustrative results show that the proposed DDPG-based UAV deployment (DDPG-UD) can achieve approximately 99.5% of the sum-rate capacity achieved by particle swarm optimization (PSO)-based UAV deployment (PSO-UD), while requiring a significantly reduced runtime at approximately 68.50% of that needed by PSO-UD, offering an efficient solution in dynamic MU-mMIMO environments. △ Less

Submitted 10 April, 2024; originally announced April 2024.

Comments: This paper has been accepted for presentation in 2024 EuCNC and 6G Summit

Multiple UAV-Assisted Cooperative DF Relaying in Multi-User Massive MIMO IoT Systems

Authors: Mobeen Mahmood, Yicheng Yuan, Tho Le-Ngoc

Abstract: This work considers a multi-user massive multiple-input multiple-output (MU-mMIMO) Internet-of-Things (IoT) system, where multiple unmanned aerial vehicles (UAVs) operating as decode-and-forward (DF) relays connect the base station (BS) to a large number of IoT devices. To maximize the total achievable rate, we propose a novel joint optimization problem of hybrid beamforming (HBF), multiple UAV re… ▽ More This work considers a multi-user massive multiple-input multiple-output (MU-mMIMO) Internet-of-Things (IoT) system, where multiple unmanned aerial vehicles (UAVs) operating as decode-and-forward (DF) relays connect the base station (BS) to a large number of IoT devices. To maximize the total achievable rate, we propose a novel joint optimization problem of hybrid beamforming (HBF), multiple UAV relay positioning, and power allocation (PA) to multiple IoT users. The study adopts a geometry-based millimeter-wave (mmWave) channel model for both links and utilizes sequential optimization based on K-means UAV-user association. The radio frequency (RF) stages are designed based on the slow time-varying angular information, while the baseband (BB) stages are designed utilizing the reduced-dimension effective channel matrices. The illustrative results show that multiple UAV-assisted cooperative relaying systems outperform a single UAV system in practical user distributions. Moreover, compared to fixed positions and equal PA of UAVs and BS, the joint optimization of UAV location and PA substantially enhances the total achievable rate. △ Less

Submitted 3 April, 2024; originally announced April 2024.

Comments: This paper has been accepted for publication in IEEE ICC 2024. arXiv admin note: text overlap with arXiv:2309.11748

Traffic Control via Connected and Automated Vehicles: An Open-Road Field Experiment with 100 CAVs

Authors: Jonathan W. Lee, Han Wang, Kathy Jang, Amaury Hayat, Matthew Bunting, Arwa Alanqary, William Barbour, Zhe Fu, Xiaoqian Gong, George Gunter, Sharon Hornstein, Abdul Rahman Kreidieh, Nathan Lichtlé, Matthew W. Nice, William A. Richardson, Adit Shah, Eugene Vinitsky, Fangyu Wu, Shengquan Xiang, Sulaiman Almatrudi, Fahd Althukair, Rahul Bhadani, Joy Carpio, Raphael Chekroun, Eric Cheng , et al. (39 additional authors not shown)

Abstract: The CIRCLES project aims to reduce instabilities in traffic flow, which are naturally occurring phenomena due to human driving behavior. These "phantom jams" or "stop-and-go waves,"are a significant source of wasted energy. Toward this goal, the CIRCLES project designed a control system referred to as the MegaController by the CIRCLES team, that could be deployed in real traffic. Our field experim… ▽ More The CIRCLES project aims to reduce instabilities in traffic flow, which are naturally occurring phenomena due to human driving behavior. These "phantom jams" or "stop-and-go waves,"are a significant source of wasted energy. Toward this goal, the CIRCLES project designed a control system referred to as the MegaController by the CIRCLES team, that could be deployed in real traffic. Our field experiment leveraged a heterogeneous fleet of 100 longitudinally-controlled vehicles as Lagrangian traffic actuators, each of which ran a controller with the architecture described in this paper. The MegaController is a hierarchical control architecture, which consists of two main layers. The upper layer is called Speed Planner, and is a centralized optimal control algorithm. It assigns speed targets to the vehicles, conveyed through the LTE cellular network. The lower layer is a control layer, running on each vehicle. It performs local actuation by overriding the stock adaptive cruise controller, using the stock on-board sensors. The Speed Planner ingests live data feeds provided by third parties, as well as data from our own control vehicles, and uses both to perform the speed assignment. The architecture of the speed planner allows for modular use of standard control techniques, such as optimal control, model predictive control, kernel methods and others, including Deep RL, model predictive control and explicit controllers. Depending on the vehicle architecture, all onboard sensing data can be accessed by the local controllers, or only some. Control inputs vary across different automakers, with inputs ranging from torque or acceleration requests for some cars, and electronic selection of ACC set points in others. The proposed architecture allows for the combination of all possible settings proposed above. Most configurations were tested throughout the ramp up to the MegaVandertest. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Adaptive Modulus RF Beamforming for Enhanced Self-Interference Suppression in Full-Duplex Massive MIMO Systems

Authors: Mobeen Mahmood, Yuanxing Zhang, Robert Morawski, Tho Le-Ngoc

Abstract: This study employs a uniform rectangular array (URA) sub-connected hybrid beamforming (SC-HBF) architecture to provide a novel self-interference (SI) suppression scheme in a full-duplex (FD) massive multiple-input multiple-output (mMIMO) system. Our primary objective is to mitigate the strong SI through the design of RF beamforming stages for uplink and downlink transmissions that utilize the spat… ▽ More This study employs a uniform rectangular array (URA) sub-connected hybrid beamforming (SC-HBF) architecture to provide a novel self-interference (SI) suppression scheme in a full-duplex (FD) massive multiple-input multiple-output (mMIMO) system. Our primary objective is to mitigate the strong SI through the design of RF beamforming stages for uplink and downlink transmissions that utilize the spatial degrees of freedom provided due to the use of large array structures. We propose a non-constant modulus RF beamforming (NCM-BF-SIS) scheme that incorporates the gain controllers for both transmit (Tx) and receive (Rx) RF beamforming stages and optimizes the uplink and downlink beam directions jointly with gain controller coefficients. To solve this challenging non-convex optimization problem, we propose a swarm intelligence-based algorithmic solution that finds the optimal beam perturbations while also adjusting the Tx/Rx gain controllers to alleviate SI subject to the directivity degradation constraints for the beams. The data-driven analysis based on the measured SI channel in an anechoic chamber shows that the proposed NCM-BF-SIS scheme can suppress SI by around 80 dB in FD mMIMO systems. △ Less

Submitted 13 February, 2024; originally announced February 2024.

Comments: This paper has been accepted for publication in IEEE WCNC 2024. arXiv admin note: text overlap with arXiv:2309.03317

Navigating Socio-Emotional Risk through Comfort-Building in a Physics Teaching Community of Practice: A Case Study

Authors: Maggie Mahmood, Hamideh Talafian, Devyn Shafer, Morten Lundsgaard, Eric Kuo, Tim Stelzer

Abstract: In teacher professional development (PD), grouping teachers with varying levels of experience can be a productive and empowering way to stimulate the exchange and co-generation of content and pedagogical knowledge. However, less experienced teachers can face socio-emotional risks when engaging in collaborative science content reasoning tasks with more experienced colleagues (Finkelstein, Jaber, &… ▽ More In teacher professional development (PD), grouping teachers with varying levels of experience can be a productive and empowering way to stimulate the exchange and co-generation of content and pedagogical knowledge. However, less experienced teachers can face socio-emotional risks when engaging in collaborative science content reasoning tasks with more experienced colleagues (Finkelstein, Jaber, & Dini, 2018), and these risks may impact the collaborative experience of both parties and the learning environment in teacher PD. This descriptive case study examines the process of productively navigating socio-emotional risks and interpersonal tensions encountered by a veteran and pre-service physics teacher during one episode of discussing physics content. We use a single term, comfort-building, to encapsulate discursive moves that result in increased feelings of comfort and safety by the participants. Comfort-building includes moves that serve to mitigate social risk, ease tension, and avoid discomfort, as well as those geared toward finding common ground and co-navigating challenges. These moves can carve out conversational space for teachers to more confidently face risks associated with being accountable to the physics content knowledge and engage in discipline-based conversations more deeply. The presented episode in this study was followed by video-stimulated individual interviews to determine how consciously the teachers connected their participation to explicit risk and comfort. This case study highlights an affective dimension for consideration in the continued study and facilitation of science teaching communities of practice, especially ones that bring together teachers with a variety of backgrounds and skill sets. △ Less

Submitted 22 July, 2024; v1 submitted 25 October, 2023; originally announced October 2023.

Comments: 56 double space pages including references, 3 figure and 3 tables

Responsive Professional Development: A Facilitation Approach for Teachers' Development in a Physics Teaching Community of Practice

Authors: Hamideh Talafian, Morten Lundsgaard, Maggie Mahmood, Devyn Shafer, Tim Stelzer, Eric Kuo

Abstract: Providing high-quality professional development for teachers with diverse backgrounds and classroom experience is a challenging task. In this work, we investigate the Illinois Physics and Secondary Schools (IPaSS) partnership program, which provides instructional resources and a network of support for high school physics teachers through a partnership with the University of Illinois. IPaSS aims to… ▽ More Providing high-quality professional development for teachers with diverse backgrounds and classroom experience is a challenging task. In this work, we investigate the Illinois Physics and Secondary Schools (IPaSS) partnership program, which provides instructional resources and a network of support for high school physics teachers through a partnership with the University of Illinois. IPaSS aims to address disparities in physics instruction by equipping teachers with university physics curricula and equipment adapted to fit the context of their high school classrooms. IPaSS' professional development design and facilitation draw inspiration from the Communities of Practice (CoP) model with a responsive facilitative approach in the design and enactment of professional development. Using interviews and surveys from 14 physics teachers, we studied the extent to which the program has responded to teachers' diverse needs while supporting their participation in physics teaching CoP. The results revealed that this model of responsive professional development -- conceptualized as being attentive and adaptive to teachers' needs -- has created very positive perceptions of the program for the teachers involved and fostered pedagogical and instructional support, professional growth opportunities, and social or personal benefits of community involvement for them. The results also demonstrated that mutual peer support has gone beyond the dynamics of the Communities of Practice framework, not only from more to less experienced but also in the reverse direction. In addition, the case study of the program revealed that taking a responsive approach can potentially facilitate teachers' transitions from being peripheral members to becoming active participants in the community. △ Less

Submitted 17 October, 2023; originally announced October 2023.

Comments: 59 double space pages including references, figures and tables

Structural diversity of molecular nitrogen on approach to polymeric states

Authors: Alexander F. Goncharov, Iskander G. Batyrev, Elena Bykova, Lukas Brüning, Huawei Chen, Mohammad F. Mahmood, Andew Steele, Nico Giordano, Timofey Fedotenko, Maxim Bykov

Abstract: Nitrogen represents an archetypal example of material exhibiting a pressure driven transformation from molecular to polymeric state. Detailed investigations of such transformations are challenging because of a large kinetic barrier between molecular and polymeric structures, making the transformation largely dependent on kinetic stimuli. In the case of nitrogen, additional complications occur due… ▽ More Nitrogen represents an archetypal example of material exhibiting a pressure driven transformation from molecular to polymeric state. Detailed investigations of such transformations are challenging because of a large kinetic barrier between molecular and polymeric structures, making the transformation largely dependent on kinetic stimuli. In the case of nitrogen, additional complications occur due to the rich polymorphism in the vicinity of the transition. Here, we report the observation of both molecular (θ) and polymeric (BP) phases, crystallized upon temperature quenching of fluid nitrogen to room temperature at 97-114 GPa. Synchrotron single-crystal X-ray diffraction, Raman spectroscopy, and first-principles theoretical calculations have been used for diagnostics of the phases and determination of their structure and stability. Molecular θ-nitrogen is the most stable among molecular phases bordering the stability field of polymeric phases, partially settling a previously noted discrepancy between theory and experiment concerning the thermodynamic stability limit of molecular phases. △ Less

Submitted 5 October, 2023; originally announced October 2023.

Comments: 23 pages, 11 figures, 3 tables

Deep Learning Meets Swarm Intelligence for UAV-Assisted IoT Coverage in Massive MIMO

Authors: Mobeen Mahmood, MohammadMahdi Ghadaksaz, Asil Koc, Tho Le-Ngoc

Abstract: This study considers a UAV-assisted multi-user massive multiple-input multiple-output (MU-mMIMO) systems, where a decode-and-forward (DF) relay in the form of an unmanned aerial vehicle (UAV) facilitates the transmission of multiple data streams from a base station (BS) to multiple Internet-of-Things (IoT) users. A joint optimization problem of hybrid beamforming (HBF), UAV relay positioning, and… ▽ More This study considers a UAV-assisted multi-user massive multiple-input multiple-output (MU-mMIMO) systems, where a decode-and-forward (DF) relay in the form of an unmanned aerial vehicle (UAV) facilitates the transmission of multiple data streams from a base station (BS) to multiple Internet-of-Things (IoT) users. A joint optimization problem of hybrid beamforming (HBF), UAV relay positioning, and power allocation (PA) to multiple IoT users to maximize the total achievable rate (AR) is investigated. The study adopts a geometry-based millimeter-wave (mmWave) channel model for both links and proposes three different swarm intelligence (SI)-based algorithmic solutions to optimize: 1) UAV location with equal PA; 2) PA with fixed UAV location; and 3) joint PA with UAV deployment. The radio frequency (RF) stages are designed to reduce the number of RF chains based on the slow time-varying angular information, while the baseband (BB) stages are designed using the reduced-dimension effective channel matrices. Then, a novel deep learning (DL)-based low-complexity joint hybrid beamforming, UAV location and power allocation optimization scheme (J-HBF-DLLPA) is proposed via fully-connected deep neural network (DNN), consisting of an offline training phase, and an online prediction of UAV location and optimal power values for maximizing the AR. The illustrative results show that the proposed algorithmic solutions can attain higher capacity and reduce average delay for delay-constrained transmissions in a UAV-assisted MU-mMIMO IoT systems. Additionally, the proposed J-HBF-DLLPA can closely approach the optimal capacity while significantly reducing the runtime by 99%, which makes the DL-based solution a promising implementation for real-time online applications in UAV-assisted MU-mMIMO IoT systems. △ Less

Submitted 20 September, 2023; originally announced September 2023.

The Study of Optical Properties for Ordered and Disordered Silicon Nanowire Structures

Authors: Ohidul Islam, Dip Sarker, K. B. M. Sharif Mahmood, Joyprokash Debnath

Abstract: We designed ordered and disordered silicon (Si) nanowire structures and analyzed their optical performance using the finite-difference time-domain (FDTD) technique. We studied the orderness of nanowire structures by calculating scalar variance. This study reveals that utilizing disorder structures can increase the average absorbance of Si nanowire structures. Spatial electric field distributions p… ▽ More We designed ordered and disordered silicon (Si) nanowire structures and analyzed their optical performance using the finite-difference time-domain (FDTD) technique. We studied the orderness of nanowire structures by calculating scalar variance. This study reveals that utilizing disorder structures can increase the average absorbance of Si nanowire structures. Spatial electric field distributions provided insights into light-matter interaction, indicating that disorder structures had higher path lengths compared to the periodic structure. We achieved an average absorbance of 41.46% for the hyperuniform Si nanowire structure with a maximum absorbance of 78.18%. Intuitively, we obtained ~70% high absorbance compared to periodic Si nanowire structure. Our findings will be conducive to designing new efficient solar cells and photodetectors. △ Less

Submitted 16 September, 2023; originally announced September 2023.

Comments: This paper includes 4 pages, 5 figures, and 1 table

Sub-Array Selection in Full-Duplex Massive MIMO for Enhanced Self-Interference Suppression

Authors: Mobeen Mahmood, Asil Koc, Duc Tuong Nguyen, Robert Morawski, Tho Le-Ngoc

Abstract: This study considers a novel full-duplex (FD) massive multiple-input multiple-output (mMIMO) system using hybrid beamforming (HBF) architecture, which allows for simultaneous uplink (UL) and downlink (DL) transmission over the same frequency band. Particularly, our objective is to mitigate the strong self-interference (SI) solely on the design of UL and DL RF beamforming stages jointly with sub-ar… ▽ More This study considers a novel full-duplex (FD) massive multiple-input multiple-output (mMIMO) system using hybrid beamforming (HBF) architecture, which allows for simultaneous uplink (UL) and downlink (DL) transmission over the same frequency band. Particularly, our objective is to mitigate the strong self-interference (SI) solely on the design of UL and DL RF beamforming stages jointly with sub-array selection (SAS) for transmit (Tx) and receive (Rx) sub-arrays at base station (BS). Based on the measured SI channel in an anechoic chamber, we propose a min-SI beamforming scheme with SAS, which applies perturbations to the beam directivity to enhance SI suppression in UL and DL beam directions. To solve this challenging nonconvex optimization problem, we propose a swarm intelligence-based algorithmic solution to find the optimal perturbations as well as the Tx and Rx sub-arrays to minimize SI subject to the directivity degradation constraints for the UL and DL beams. The results show that the proposed min-SI BF scheme can achieve SI suppression as high as 78 dB in FD mMIMO systems. △ Less

Submitted 6 September, 2023; originally announced September 2023.

Comments: This paper has been accepted for publication in IEEE Globecom 2023

SPLAL: Similarity-based pseudo-labeling with alignment loss for semi-supervised medical image classification

Authors: Md Junaid Mahmood, Pranaw Raj, Divyansh Agarwal, Suruchi Kumari, Pravendra Singh

Abstract: Medical image classification is a challenging task due to the scarcity of labeled samples and class imbalance caused by the high variance in disease prevalence. Semi-supervised learning (SSL) methods can mitigate these challenges by leveraging both labeled and unlabeled data. However, SSL methods for medical image classification need to address two key challenges: (1) estimating reliable pseudo-la… ▽ More Medical image classification is a challenging task due to the scarcity of labeled samples and class imbalance caused by the high variance in disease prevalence. Semi-supervised learning (SSL) methods can mitigate these challenges by leveraging both labeled and unlabeled data. However, SSL methods for medical image classification need to address two key challenges: (1) estimating reliable pseudo-labels for the images in the unlabeled dataset and (2) reducing biases caused by class imbalance. In this paper, we propose a novel SSL approach, SPLAL, that effectively addresses these challenges. SPLAL leverages class prototypes and a weighted combination of classifiers to predict reliable pseudo-labels over a subset of unlabeled images. Additionally, we introduce alignment loss to mitigate model biases toward majority classes. To evaluate the performance of our proposed approach, we conduct experiments on two publicly available medical image classification benchmark datasets: the skin lesion classification (ISIC 2018) and the blood cell classification dataset (BCCD). The experimental results empirically demonstrate that our approach outperforms several state-of-the-art SSL methods over various evaluation metrics. Specifically, our proposed approach achieves a significant improvement over the state-of-the-art approach on the ISIC 2018 dataset in both Accuracy and F1 score, with relative margins of 2.24\% and 11.40\%, respectively. Finally, we conduct extensive ablation experiments to examine the contribution of different components of our approach, validating its effectiveness. △ Less

Submitted 10 July, 2023; originally announced July 2023.

Comments: Under Review

PyPSA-Earth. A New Global Open Energy System Optimization Model Demonstrated in Africa

Authors: Maximilian Parzen, Hazem Abdel-Khalek, Ekaterina Fedorova, Matin Mahmood, Martha Maria Frysztacki, Johannes Hampp, Lukas Franken, Leon Schumm, Fabian Neumann, Davide Poli, Aristides Kiprakis, Davide Fioriti

Abstract: Macro-energy system modelling is used by decision-makers to steer the global energy transition toward an affordable, sustainable and reliable future. Closed-source models are the current standard for most policy and industry decisions. However, open models have proven to be competitive alternatives that promote science, robust technical analysis, collaboration and transparent policy decision-makin… ▽ More Macro-energy system modelling is used by decision-makers to steer the global energy transition toward an affordable, sustainable and reliable future. Closed-source models are the current standard for most policy and industry decisions. However, open models have proven to be competitive alternatives that promote science, robust technical analysis, collaboration and transparent policy decision-making. Yet, two issues slow the adoption: open models are often designed with limited geographic scope, hindering synergies from collaboration, or are based on low spatially resolved data, limiting their use. Here we introduce PyPSA-Earth, the first open-source global energy system model with data in high spatial and temporal resolution. It enables large-scale collaboration by providing a tool that can model the world energy system or any subset of it. This work is derived from the European PyPSA-Eur model using new data and functions. It is suitable for operational as well as combined generation, storage and transmission expansion studies. The model provides two main features: (1) customizable data extraction and preparation scripts with global coverage and (2) a PyPSA energy modelling framework integration. The data includes electricity demand, generation and medium to high-voltage networks from open sources, yet additional data can be further integrated. A broad range of clustering and grid meshing strategies help adapt the model to computational and practical needs. A data validation for the entire African continent is performed and the optimization features are tested with a 2060 net-zero planning study for Nigeria. The demonstration shows that the presented developments can build a highly detailed energy system model for energy planning studies to support policy and technical decision-making. We welcome joining forces to address the challenges of the energy transition together. △ Less

Submitted 10 September, 2022; originally announced September 2022.

Comments: 36 pages, 14 figures, 3 tables

PyPSA meets Africa: Developing an open source electricity network model of the African continent

Authors: Desen Kirli, Johannes Hampp, Koen van Greevenboek, Rebecca Grant, Matin Mahmood, Maximilian Parzen, Aristides Kiprakis

Abstract: Electricity network modelling and grid simulations form a key enabling element for the integration of newer and cleaner technologies such as renewable energy generation and electric vehicles into the existing grid and energy system infrastructure. This paper reviews the models of the African electricity systems and highlights the gaps in the open model landscape. Using PyPSA (an open Power System… ▽ More Electricity network modelling and grid simulations form a key enabling element for the integration of newer and cleaner technologies such as renewable energy generation and electric vehicles into the existing grid and energy system infrastructure. This paper reviews the models of the African electricity systems and highlights the gaps in the open model landscape. Using PyPSA (an open Power System Analysis package), the paper outlines the pathway to a fully open model and data to increase the transparency in the African electricity system planning. Optimisation and modelling can reveal viable pathways to a sustainable energy system, aiding strategic planning for upgrades and policy-making for accelerated integration of renewable energy generation and smart grid technologies such as battery storage in Africa. △ Less

Submitted 20 October, 2021; originally announced October 2021.

Learning Indoor Layouts from Simple Point-Clouds

Authors: Md. Tareq Mahmood, Mohammed Eunus Ali

Abstract: Reconstructing a layout of indoor spaces has been a crucial part of growing indoor location based services. One of the key challenges in the proliferation of indoor location based services is the unavailability of indoor spatial maps due to the complex nature of capturing an indoor space model (e.g., floor plan) of an existing building. In this paper, we propose a system to automatically generate… ▽ More Reconstructing a layout of indoor spaces has been a crucial part of growing indoor location based services. One of the key challenges in the proliferation of indoor location based services is the unavailability of indoor spatial maps due to the complex nature of capturing an indoor space model (e.g., floor plan) of an existing building. In this paper, we propose a system to automatically generate floor plans that can recognize rooms from the point-clouds obtained through smartphones like Google's Tango. In particular, we propose two approaches - a Recurrent Neural Network based approach using Pointer Network and a Convolutional Neural Network based approach using Mask-RCNN to identify rooms (and thereby floor plans) from point-clouds. Experimental results on different datasets demonstrate approximately 0.80-0.90 Intersection-over-Union scores, which show that our models can effectively identify the rooms and regenerate the shapes of the rooms in heterogeneous environment. △ Less

Submitted 7 August, 2021; originally announced August 2021.

Local fractional metric dimension of rotationally symmetric planar graphs arisen from planar chorded cycles

Authors: Shahbaz Ali, Raúl M. Falcón, Muhammad Khalid Mahmood

Abstract: In this paper, a new family of rotationally symmetric planar graphs is described based on an edge coalescence of planar chorded cycles. Their local fractional metric dimension is established for those ones arisen from chorded cycles of order up to six. Their asymptotic behaviour enables us to ensure the existence of new families of rotationally symmetric planar graphs with either constant or bound… ▽ More In this paper, a new family of rotationally symmetric planar graphs is described based on an edge coalescence of planar chorded cycles. Their local fractional metric dimension is established for those ones arisen from chorded cycles of order up to six. Their asymptotic behaviour enables us to ensure the existence of new families of rotationally symmetric planar graphs with either constant or bounded local fractional dimension. △ Less

Submitted 17 May, 2021; originally announced May 2021.

Comments: 20 pages, 8 figures and 8 tables

MSC Class: 05C72; 05C12; 05C10

Alternative ways to initiate students' intuition, and hence internalization, of why zero factorial is equal to one

Authors: Munir Mahmood, Lori L. Murray, Ricardas Zitikis, Ibtihal Mahmood

Abstract: Zero factorial, defined to be one, is often counterintuitive to students but nonetheless an interesting concept to convey in a classroom environment. The challenge is to delineate the concept in a simple and effective way through the practice of justification, a familiar concept in mathematics and science education. In this regard two algebraic and one statistical justification using the squeeze t… ▽ More Zero factorial, defined to be one, is often counterintuitive to students but nonetheless an interesting concept to convey in a classroom environment. The challenge is to delineate the concept in a simple and effective way through the practice of justification, a familiar concept in mathematics and science education. In this regard two algebraic and one statistical justification using the squeeze theorem are presented. To assess the effectiveness of the justifications, a student survey was conducted at a comprehensive university incorporating the analysis of the pre- and post-presentation statements. They clearly present that the justifications are useful in giving credence to zero factorial equals one. Overall, the results from the online survey supports that the students preferred Justification 1. The justifications provide instructors alternative ways to initiate exploration of students' intuitive set up of comprehending unobvious facts like zero factorial equals one. For a range of learners with their varied abilities to perform various mental activities most closely associated with learning and problem-solving, the justifications as simple alternative methods offer the potential to raise the current level of cognitive skills to inspire differentiated paths of learning. These are evident from survey results noting the role of statistical thinking and techniques. △ Less

Submitted 18 June, 2024; v1 submitted 16 March, 2021; originally announced March 2021.

Comments: 15 pages, 3 figures, 4 tables

High-pressure synthesis of Dirac materials: layered van der Waals bonded BeN$_4$ polymorph

Authors: Maxim Bykov, Timofey Fedotenko, Stella Chariton, Dominique Laniel, Konstantin Glazyrin, Michael Hanfland, Jesse S. Smith, Vitali B. Prakapenka, Mohammad F. Mahmood, Alexander F. Goncharov, Alena V. Ponomareva, Ferenc Tasnádi, Alexei I. Abrikosov, Talha Bin Masood, Ingrid Hotz, Alexander N. Rudenko, Mikhail I. Katsnelson, Natalia Dubrovinskaia, Leonid Dubrovinsky, Igor A. Abrikosov

Abstract: High pressure chemistry is known to inspire the creation of unexpected new classes of compounds with exceptional properties. Here we report the synthesis at ~90 GPa of novel beryllium polynitrides, monoclinic and triclinic BeN4. The triclinic phase, upon decompression to ambient conditions, transforms into a compound with atomic-thick BeN4 layers interconnected via weak van der Waals bonds consist… ▽ More High pressure chemistry is known to inspire the creation of unexpected new classes of compounds with exceptional properties. Here we report the synthesis at ~90 GPa of novel beryllium polynitrides, monoclinic and triclinic BeN4. The triclinic phase, upon decompression to ambient conditions, transforms into a compound with atomic-thick BeN4 layers interconnected via weak van der Waals bonds consisting of polyacetylene-like nitrogen chains with conjugated π-systems and Be atoms in square-planar coordination. Theoretical calculations for a single BeN4 layer show that its electronic lattice is described by a slightly distorted honeycomb structure reminiscent of the graphene lattice and the presence of Dirac points in the electronic band structure at the Fermi level. The BeN4 layer, i.e. beryllonitrene, represents a qualitatively new class of 2D materials that can be built of a metal atom and polymeric nitrogen chains and host anisotropic Dirac fermions. △ Less

Submitted 8 March, 2021; v1 submitted 29 October, 2020; originally announced October 2020.

Journal ref: Phys. Rev. Lett. 126, 175501 (2021)

Augmented Curation of Unstructured Clinical Notes from a Massive EHR System Reveals Specific Phenotypic Signature of Impending COVID-19 Diagnosis

Authors: FNU Shweta, Karthik Murugadoss, Samir Awasthi, AJ Venkatakrishnan, Arjun Puranik, Martin Kang, Brian W. Pickering, John C. O'Horo, Philippe R. Bauer, Raymund R. Razonable, Paschalis Vergidis, Zelalem Temesgen, Stacey Rizza, Maryam Mahmood, Walter R. Wilson, Douglas Challener, Praveen Anand, Matt Liebers, Zainab Doctor, Eli Silvert, Hugo Solomon, Tyler Wagner, Gregory J. Gores, Amy W. Williams, John Halamka , et al. (2 additional authors not shown)

Abstract: Understanding the temporal dynamics of COVID-19 patient phenotypes is necessary to derive fine-grained resolution of pathophysiology. Here we use state-of-the-art deep neural networks over an institution-wide machine intelligence platform for the augmented curation of 15.8 million clinical notes from 30,494 patients subjected to COVID-19 PCR diagnostic testing. By contrasting the Electronic Health… ▽ More Understanding the temporal dynamics of COVID-19 patient phenotypes is necessary to derive fine-grained resolution of pathophysiology. Here we use state-of-the-art deep neural networks over an institution-wide machine intelligence platform for the augmented curation of 15.8 million clinical notes from 30,494 patients subjected to COVID-19 PCR diagnostic testing. By contrasting the Electronic Health Record (EHR)-derived clinical phenotypes of COVID-19-positive (COVIDpos, n=635) versus COVID-19-negative (COVIDneg, n=29,859) patients over each day of the week preceding the PCR testing date, we identify anosmia/dysgeusia (37.4-fold), myalgia/arthralgia (2.6-fold), diarrhea (2.2-fold), fever/chills (2.1-fold), respiratory difficulty (1.9-fold), and cough (1.8-fold) as significantly amplified in COVIDpos over COVIDneg patients. The specific combination of cough and diarrhea has a 3.2-fold amplification in COVIDpos patients during the week prior to PCR testing, and along with anosmia/dysgeusia, constitutes the earliest EHR-derived signature of COVID-19 (4-7 days prior to typical PCR testing date). This study introduces an Augmented Intelligence platform for the real-time synthesis of institutional knowledge captured in EHRs. The platform holds tremendous potential for scaling up curation throughput, with minimal need for retraining underlying neural networks, thus promising EHR-powered early diagnosis for a broad spectrum of diseases. △ Less

Submitted 28 April, 2020; v1 submitted 17 April, 2020; originally announced April 2020.

Design and Implementation of an Automatic Synchronizing and Protection Relay through Power-Hardware-in-the-Loop (PHIL) Simulation

Authors: Mishal Mahmood, Mariam Azam, Khair-un-Nisa Fatima, Muhammad Sarwar, Muhammad Abubakar, Babar Hussain

Abstract: This paper focuses on the design and implementation of an automatic synchronizing and protection relay to automate the synchronization process of a Distributed Energy Resource (DER) to the Main Grid. The proposed design utilize a cost-effective data acquisition using arduino in combination with LabVIEW software to implement the multi-purpose synchronizing relay. The proposed synchronizing relay is… ▽ More This paper focuses on the design and implementation of an automatic synchronizing and protection relay to automate the synchronization process of a Distributed Energy Resource (DER) to the Main Grid. The proposed design utilize a cost-effective data acquisition using arduino in combination with LabVIEW software to implement the multi-purpose synchronizing relay. The proposed synchronizing relay is capable of synchronizing a Distributed Generator (DG) to the power grid from black-start and fulfills the requirements imposed by the utility. The synchronizing relay is implemented through voltage and frequency control of an actual lab-scale synchronous generator. In the synchronization process, frequency synchronization is done using speed control of the stepper motor as prime mover and voltage synchronization is accomplished using Excitation Control module through Power-Hardware-in-the-Loop (PHIL) simulation. In grid-connected mode, active and reactive power controls and protection schemes for the synchronous generator have also been implemented. The proposed multi-function relay has been deployed and tested on a lab-scale test bed to validate the proposed design and functionality. △ Less

Submitted 30 June, 2019; originally announced July 2019.

Comments: 6 pages, 14 figures, submitted in IEEE International Symposium on Recent Advances in Electrical Engineering

A next-generation LHC heavy-ion experiment

Authors: D. Adamová, G. Aglieri Rinella, M. Agnello, Z. Ahammed, D. Aleksandrov, A. Alici, A. Alkin, T. Alt, I. Altsybeev, D. Andreou, A. Andronic, F. Antinori, P. Antonioli, H. Appelshäuser, R. Arnaldi, I. C. Arsene, M. Arslandok, R. Averbeck, M. D. Azmi, X. Bai, R. Bailhache, R. Bala, L. Barioglio, G. G. Barnaföldi, L. S. Barnby , et al. (374 additional authors not shown)

Abstract: The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with th… ▽ More The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with the innermost layers possibly positioned inside the beam pipe. In addition to superior tracking and vertexing capabilities over a wide momentum range down to a few tens of MeV/$c$, the detector will provide particle identification via time-of-flight determination with about 20~ps resolution. In addition, electron and photon identification will be performed in a separate shower detector. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector. △ Less

Submitted 2 May, 2019; v1 submitted 31 January, 2019; originally announced February 2019.

Comments: Input to the 2020 Update of the European Particle Physics Strategy

Insulator-metal transition in liquid hydrogen and deuterium

Authors: Shuqing Jiang, Nicholas Holtgrewe, Zachary M. Geballe, Sergey S. Lobanov, Mohammad F. Mahmood, R. Stewart McWilliams, Alexander F. Goncharov

Abstract: The insulator-to-metal transition in dense fluid hydrogen is an essential phenomenon to understand gas giant planetary interiors and the physical and chemical behavior of highly compressed condensed matter. Using fast laser spectroscopy techniques to probe hydrogen and deuterium precompressed in a diamond anvil cell and laser heated on microsecond timescales, we observe an onset of metal-like refl… ▽ More The insulator-to-metal transition in dense fluid hydrogen is an essential phenomenon to understand gas giant planetary interiors and the physical and chemical behavior of highly compressed condensed matter. Using fast laser spectroscopy techniques to probe hydrogen and deuterium precompressed in a diamond anvil cell and laser heated on microsecond timescales, we observe an onset of metal-like reflectivity in the visible spectral range at P>150 GPa and T>3000 K. The reflectance increases rapidly with decreasing photon energy indicating free-electron metallic behavior with a plasma edge in the visible spectral range at high temperatures. The reflectivity spectra also suggest much longer electronic collision time (>1 fs) than previously inferred, implying that metallic hydrogens at the conditions studied are not in the regime of saturated conductivity (Mott-Ioffe-Regel limit). Combined with previously reported data, our results suggest the existence of a semiconducting intermediate fluid hydrogen state en route to metallization. △ Less

Submitted 2 October, 2018; originally announced October 2018.

Comments: 23 pages, 15 figures

Metallization and molecular dissociation of dense fluid nitrogen

Authors: Shuqing Jiang, Nicholas Holtgrewe, Sergey S. Lobanov, Fuhai Su, Mohammad F. Mahmood, R. Stewart McWilliams, Alexander F. Goncharov

Abstract: Diatomic nitrogen is an archetypal molecular system known for its exceptional stability and complex behavior at high pressures and temperatures, including rich solid polymorphism, formation of energetic states, and an insulator-to-metal transformation coupled to a change in chemical bonding. However, the thermobaric conditions of the fluid molecular-polymer phase boundary and associated metallizat… ▽ More Diatomic nitrogen is an archetypal molecular system known for its exceptional stability and complex behavior at high pressures and temperatures, including rich solid polymorphism, formation of energetic states, and an insulator-to-metal transformation coupled to a change in chemical bonding. However, the thermobaric conditions of the fluid molecular-polymer phase boundary and associated metallization have not been experimentally established. Here, by applying dynamic laser heating of compressed nitrogen and using fast optical spectroscopy to study electronic properties, we observe a transformation from insulating (molecular) to conducting dense fluid nitrogen at temperatures that decrease with pressure, and establish that metallization, and presumably fluid polymerization, occurs above 125 GPa at 2500 K. Our observations create a better understanding of the interplay between molecular dissociation, melting, and metallization revealing features that are common in simple molecular systems. △ Less

Submitted 27 June, 2018; v1 submitted 7 November, 2017; originally announced November 2017.

Comments: 19 pages, 9 figures

MSC Class: aps.org

Dynamical System Modeling to Simulate Donor T Cell Response to Whole Exome Sequencing-Derived Recipient Peptides Demonstrates Different Alloreactivity Potential In HLA-Matched and Mismatched Donor-Recipient Pairs

Authors: B. Abdul Razzaq, A. Scalora, V. Koparde, J. Meier, M. Mahmood, S. Salman, M. Jameson-Lee, M. Serrano, N. Sheth, M. Voelkner, D. Kobulnicky, C. Roberts, A. Ferreira-Gonzalez, M. Manjili, G. Buck, M. Neale, A. Toor

Abstract: Stem cell transplants may be considered as dynamical systems to allow sequence differences across the exomes of the transplant donors and recipients to be used to simulate an alloreactive T cell response. Whole exome sequencing was performed on HLA matched stem cell transplant donor-recipient pairs, and the nucleotide sequence differences translated to peptides. The binding affinity of the peptide… ▽ More Stem cell transplants may be considered as dynamical systems to allow sequence differences across the exomes of the transplant donors and recipients to be used to simulate an alloreactive T cell response. Whole exome sequencing was performed on HLA matched stem cell transplant donor-recipient pairs, and the nucleotide sequence differences translated to peptides. The binding affinity of the peptides to the relevant HLA in each pair was determined. The resulting array of peptide-HLA binding affinity values in each patient was used to simulate an alloreactive donor derived T cell repertoire. This simulated T cell repertoire reproduces a number of features of clinically observed T cell repertoire. The simulated, alloreactive T cell repertoire was markedly different in HLA matched stem cell transplant donors and recipients and demonstrates a possible correlation with survival. △ Less

Submitted 16 August, 2015; originally announced August 2015.

Comments: 50 pages (including references and supplementary materials), 12 figures, 3 supplementary figures

Backbone NxH Compounds at High Pressures

Authors: Alexander F. Goncharov, Nicholas Holtgrewe, Guangrui Qian, Chaohao Hu, Artem R. Oganov, M. Somayazulu, E. Stavrou, Chris J. Pickard, Adam Berlie, Fei Yen, M. Mahmood, S. S. Lobanov, Z. Konôpková, V. B. Prakapenka

Abstract: Optical and synchrotron x-ray diffraction diamond anvil cell experiments have been combined with first principles theoretical structure predictions to investigate mixed N2 and H2 up to 55 GPa. We found the formation of oligomeric NxH (x>1) compounds using mechano- and photochemistry at pressures above 47 and 10 GPa, respectively, and room temperature. These compounds can be recovered to ambient pr… ▽ More Optical and synchrotron x-ray diffraction diamond anvil cell experiments have been combined with first principles theoretical structure predictions to investigate mixed N2 and H2 up to 55 GPa. We found the formation of oligomeric NxH (x>1) compounds using mechano- and photochemistry at pressures above 47 and 10 GPa, respectively, and room temperature. These compounds can be recovered to ambient pressure at T<130 K, whereas at room temperature, they can be metastable down to 3.5 GPa. Our results suggest new pathways for synthesis of environmentally benign high energy-density materials and alternative planetary ice. △ Less

Submitted 3 September, 2014; originally announced September 2014.

Comments: 26 pages, 12 figures, I table

Bayes Information-theoretic Radar Waveform Design and Delay-Doppler Resolution for Extended Targets

Authors: Mir H. Mahmood, Mark R. Bell

Abstract: In this paper, we consider the problem of information-theoretic waveform design for active sensing systems such as radar for extended targets. Contrary to the popular formulation of the problem in the estimation-theoretic context, we are rather interested in a Bayes decision theoretic approach where a target present in the environment belongs to two or more classes whose priors are known. Optimal… ▽ More In this paper, we consider the problem of information-theoretic waveform design for active sensing systems such as radar for extended targets. Contrary to the popular formulation of the problem in the estimation-theoretic context, we are rather interested in a Bayes decision theoretic approach where a target present in the environment belongs to two or more classes whose priors are known. Optimal information theory based transmit waveforms are designed by maximizing mutual information (MI) between the received signal and the target impulse response, resulting in a novel iterative design equation. We also derive signal to noise ratio (SNR) maximization based waveforms. In an effort to quantize the benefits of such a design approach, the delay-Doppler ambiguity function of information-theoretic waveforms are presented and is compared with Barker codes of similar time-bandwidth product. It is found that the ambiguity function of information-theoretic waveforms has very sharp main lobe in general and excellent time autocorrelation properties in particular. △ Less

Submitted 21 February, 2014; v1 submitted 16 December, 2012; originally announced December 2012.

Comments: The paper has been withdrawn because a more efficient algorithm for waveform design has been proposed the authors. The journal version of the paper will be uploaded shortly