Showing 1–10 of 10 results for author: Kunti, G

The influence of frequency and gravity on the orientation of active metallo-dielecric Janus particles translating under a uniform applied alternating-current electric field

Authors: Alicia Boymelgreen, Golak Kunti, Pablo Garcia Sanchez, Gilad Yossifone

Abstract: Theoretical and numerical models of active Janus particles commonly assume that the metallo-dielectric interface is parallel to the driving applied electric field. However, our experimental observations indicate that the equilibrium angle of orientation of electrokinetically driven Janus particles varies as a function of the frequency and voltage of the applied electric field. Here, we quantify th… ▽ More Theoretical and numerical models of active Janus particles commonly assume that the metallo-dielectric interface is parallel to the driving applied electric field. However, our experimental observations indicate that the equilibrium angle of orientation of electrokinetically driven Janus particles varies as a function of the frequency and voltage of the applied electric field. Here, we quantify the variation of the orientation with respect to the electric field and demonstrate that the equilibrium position represents the interplay between gravitational, electrostatic and electrohydrodynamic torques. The latter two categories are functions of the applied field (frequency, voltage) as well as the height of the particle above the substrate. Maximum departure from the alignment with the electric field occurs at low frequencies characteristic of induced-charge electrophoresis and at low voltages where gravity dominates the electrostatic and electrohydrodynamic torques. The departure of the interface from alignment with the electric field is shown to decrease particle mobility through comparison of freely suspended Janus particles subject only to electrical forcing and magnetized Janus particles in which magnetic torque is used to align the interface with the electric field. Consideration of the role of gravitational torque and particle-wall interactions could account for some discrepancies between theory, numerics and experiment in active matter systems. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Energy-Efficient Micromixing in Paper Based Devices Mediated by the Interplay of Electrical and Thermal Fields

Authors: Golak Kunti, Sankha Shuvra Das, Vinay Manaswi Pedireddi, Anandaroop Bhattacharya, Suman Chakraborty

Abstract: Biomedical and biochemical processes in paper-based microfluidic devices often deal with mixing of two analytes to perform important functions. Uniform mixing of analytes in paper matrix is a challenging proposition, often necessitating complicated channel design or high energy external fields for realizing the desired functionality. In sharp contrast, here we demonstrate an energy-efficient techn… ▽ More Biomedical and biochemical processes in paper-based microfluidic devices often deal with mixing of two analytes to perform important functions. Uniform mixing of analytes in paper matrix is a challenging proposition, often necessitating complicated channel design or high energy external fields for realizing the desired functionality. In sharp contrast, here we demonstrate an energy-efficient technique compatible with handing biofluids, to achieve a high level of mixing of two fluids in paper-based microfluidic devices without deploying complex channel shapes. Our method employs a simple, cost-effective printing-based method to fabricate paper channel with interdigitated electrodes laid out using pencil sketch. An alternating current electric field of sufficiently low voltage is used to generate perturbations on the interface of the two fluids streams undertaking spontaneous capillary imbibition. The consequent variations in electric field generate local thermal gradients, leading to localized volumetric forces triggering efficient fluid mixing. Our results find a wide variety of applications ranging from biochemical analysis to medical diagnostics. △ Less

Submitted 28 January, 2019; originally announced May 2019.

On-Chip Concentration and Patterning of Biological Cells Using Interplay of Electrical and Thermal Fields

Authors: Golak Kunti, Tarun Agarwal, Anandaroop Bhattacharya, Tapas Kumar Maiti, Suman Chakraborty

Abstract: We demonstrate a method of concentrating and patterning of biological cells on a chip, exploiting the confluence of electric and thermal fields, without necessitating the use of any external heating or illuminating source. The technique simply employs two parallel plate electrodes and an insulating layer over the bottom electrode, with a drilled insulating layer for inducing localized variations i… ▽ More We demonstrate a method of concentrating and patterning of biological cells on a chip, exploiting the confluence of electric and thermal fields, without necessitating the use of any external heating or illuminating source. The technique simply employs two parallel plate electrodes and an insulating layer over the bottom electrode, with a drilled insulating layer for inducing localized variations in the thermal field. A strong induced electric field, in the process, penetrates through the narrow hole and generates highly non-uniform heating, which in turn, results in gradients in electrical properties and induces mobile charges to impose directional fluid flow. The toroidal vortices, induced by secondary electrokinetic forces originating out of temperature-dependent electrical property variations, transport the suspended cells towards a hot-spot site of the chip, for rapid concentrating and patterning into different shaped clusters based on pre-designed conditions, without exceeding safe temperature limits that do not result in damage of thermally labile biological samples. We characterize the efficacy of the cell trapping process for two different biological entities, namely, Escherichia coli bacteria and yeast cell. These results may be of profound importance towards developing novel biomedical microdevices for drug discovery, antibiotic resistance assessment and medical diagnostics. △ Less

Submitted 15 May, 2019; v1 submitted 7 May, 2019; originally announced May 2019.

Joule Heating-Induced Particle Manipulation on a Microfluidic Chip

Authors: Golak Kunti, Jayabrata Dhar, Anandaroop Bhattacharya, Suman Chakraborty

Abstract: We develop an electrokinetic technique that continuously manipulates colloidal particles to concentrate into patterned particulate groups in an energy efficient way, by exclusive harnessing of the intrinsic Joule heating effects. Our technique exploits the alternating current electrothermal flow phenomenon which is generated due to the interaction between non-uniform electric and thermal fields. H… ▽ More We develop an electrokinetic technique that continuously manipulates colloidal particles to concentrate into patterned particulate groups in an energy efficient way, by exclusive harnessing of the intrinsic Joule heating effects. Our technique exploits the alternating current electrothermal flow phenomenon which is generated due to the interaction between non-uniform electric and thermal fields. Highly non-uniform electric field generates sharp temperature gradients by generating spatially-varying Joule heat that varies along radial direction from a concentrated point hotspot. Sharp temperature gradients induce local variation in electric properties which, in turn, generate strong electrothermal vortex. The imposed fluid flow brings the colloidal particles at the centre of the hotspot and enables particle aggregation. Further, manoeuvering structures of the Joule heating spots, different patterns of particle clustering may be formed in a low power budget, thus, opening up a new realm of on-chip particle manipulation process without necessitating highly focused laser beam which is much complicated and demands higher power budget. This technique can find its use in Lab-on-a-chip devices to manipulate particle groups, including biological cells. △ Less

Submitted 28 January, 2019; originally announced April 2019.

Alternating Current Electrothermal Flow for Energy Efficient Thermal Management of Microprocessor Hot Spots

Authors: Golak Kunti, Jayabrata Dhar, Anandaroop Bhattacharya, Suman Chakraborty

Abstract: The paper presents numerical results on an innovative concept of an efficient, site-specific cooling technology for microprocessor hot spots using Alternating Current Electrothermal Flow (ACET). ACET deploys an electrokinetic transport mechanism without requiring any external prime mover and can be shown to be highly effective in reducing hot spot temperatures below their allowable limits. The pro… ▽ More The paper presents numerical results on an innovative concept of an efficient, site-specific cooling technology for microprocessor hot spots using Alternating Current Electrothermal Flow (ACET). ACET deploys an electrokinetic transport mechanism without requiring any external prime mover and can be shown to be highly effective in reducing hot spot temperatures below their allowable limits. The proposed technique leverages the heat source(s) itself to drive the fluid in the ACET cooling mechanism, thereby making this a highly energy efficient active technique. Our parametric analyses present the optimal range of fluid properties, viz. electrical conductivity where the cooling efficiency is maximum. Further, the impact of geometrical parameters as well as input voltages has been characterized. Our results show a reduction of hot spot temperature by more than 30% for flow through a channel of 600 microns under appropriate conditions at an applied AC voltage of 10-12 V. Comparison with other micro-cooler technologies show the proposed technique to be more energy efficient in its range of operation. These results establish the potential of the ACET cooling and can open up a new avenue to be explored for thermal management of miniaturized devices and systems. △ Less

Submitted 7 September, 2018; originally announced October 2018.

Directional free-surface flows on a microfluidic chip with interplay of electrical and thermal fields

Authors: Golak Kunti, Jayabrata Dhar, Anandaroop Bhattachariya, Suman Chakraborty

Abstract: Free-surface electrokinetic flows have been attracting increasing attention from the research community over recent times, as attributable to their diverse fields of applications ranging from fluid mixing, particle manipulation to bio-chemical processing on a chip. Traditional electrokinetic processes governing free surface flows are mostly effective in manipulating fluids having characteristicall… ▽ More Free-surface electrokinetic flows have been attracting increasing attention from the research community over recent times, as attributable to their diverse fields of applications ranging from fluid mixing, particle manipulation to bio-chemical processing on a chip. Traditional electrokinetic processes governing free surface flows are mostly effective in manipulating fluids having characteristically low values of the electrical conductivity (lower than 0.085 S/m). Biological and biochemical processes, on the other hand, typically aim to manipulate fluids having higher electrical conductivities. To circumvent the problem of traditional electrokinetic processes in manipulating highly conductive fluids mediated by free surface flows, here we demonstrate a novel on-chip methodology for the same by exploiting the interaction between an alternating electric current and a thermal field. The consequent local gradients in electrical properties can be tuned to direct the flow towards a specific direction on the interface, opening up a new realm of on-chip process control without necessitating the creation of a geometric confinement. Similar concept of free-surface flow can be used to trigger the fluid along a open-channel flow △ Less

Submitted 21 August, 2018; originally announced August 2018.

Comments: 14 pages

Alternating current driven interfacial dynamics of a binary fluid in a patterned fluidic environment modulated by electrothermal effects

Authors: Golak Kunti, Anandaroop Bhattacharya, Suman Chakraborty

Abstract: In this paper, we depict interfacial electro-thermo-chemical-hydrodynamics of two immiscible fluids in a microchannel with substrates patterned by ribs. The motion of the binary fluids is set by an alternating current electrothermal (ACET) mechanism. Our investigations, based on free-energy-based phase field formalism, reveal that the capillary filling dynamics and the contact line motion are stro… ▽ More In this paper, we depict interfacial electro-thermo-chemical-hydrodynamics of two immiscible fluids in a microchannel with substrates patterned by ribs. The motion of the binary fluids is set by an alternating current electrothermal (ACET) mechanism. Our investigations, based on free-energy-based phase field formalism, reveal that the capillary filling dynamics and the contact line motion are strong functions of the wetting characteristics and geometric parameters of the patterned ribs. Modulation of these parameters alters the surface energy over the rib surface, which, in turn, facilitates the interaction between interfacial tension and driving electrothermal forces. The competition between two forces may speed up or slow down the fluid-fluid-solid contact line motion over the rib surface. At the edges of the ribs, the interface can halt for a sufficiently long time owing to contact line pinning. Alteration in positions of the rib between the electrode pairs changes the electric field strength and thereby bulk ACET forces across the contact line. Further, by suitable arrangement of the ribs, various intricate shapes of the liquid front can be achieved over a short distance, which can have significant implications in the morphological control of microscale flows. △ Less

Submitted 20 April, 2018; originally announced April 2018.

Alteration in contact line dynamics through competition between thermocapillary and electrothermal effects

Authors: Golak Kunti, Anandaroop Bhattacharya, Suman Chakraborty

Abstract: The contact line dynamics of a thermal field assisted flow configuration of two immiscible fluids is considered in a narrow thermofluidic pathway. The surfaces of the channel are wetted with predesigned wettabilities and interdigitated electrodes are mounted on the substrates to generate non-uniform electric field. In this study, the interplay of thermocapillary and electrothermal forces on interf… ▽ More The contact line dynamics of a thermal field assisted flow configuration of two immiscible fluids is considered in a narrow thermofluidic pathway. The surfaces of the channel are wetted with predesigned wettabilities and interdigitated electrodes are mounted on the substrates to generate non-uniform electric field. In this study, the interplay of thermocapillary and electrothermal forces on interfacial dynamics are studied in detail. The former is caused by surface tension gradients while the latter results from gradients in permittivity and electrical conductivity. Our investigations reveal that the relative strength of interfacial forces and electrothermal forces and their interactions can be effectively used to control the capillary filling time as well as the flow dynamics. For same strength of thermocapillary and electrothermal forces (characterized by individual dimensionless numbers) electrothermal forces dominate over thermocapillary forces. However, interfacial forces at some wettabilities dominate over electrothermal forces and set the fluid motion toward the entry of the channel. △ Less

Submitted 20 April, 2018; originally announced April 2018.

Electrothermally induced flow in AC EWOD droplet

Authors: Golak Kunti, Anandaroop Bhattacharya, Suman Chakraborty

Abstract: We show a novel way of generating electrohydrodynamic motion inside a droplet under AC electrowetting. Using a very low applied voltage (10<V) strong electrothermal motion can be generated in the droplet. Alternating current electrothermal (ACET) actuation originates due to imposed Joule heating into the fluid body via applied electric field. A parametric study based on operating parameters and ge… ▽ More We show a novel way of generating electrohydrodynamic motion inside a droplet under AC electrowetting. Using a very low applied voltage (10<V) strong electrothermal motion can be generated in the droplet. Alternating current electrothermal (ACET) actuation originates due to imposed Joule heating into the fluid body via applied electric field. A parametric study based on operating parameters and geometrical parameter is conducted experimentally and numerically. With the operating ranges of parameters, high fluid velocity of the order of mm/s can be generated inside the droplet. Further improvement in fluid motion can be anticipated through optimization technique. The investigations revealed in the analysis can be used as useful tool in the design of efficient drop-based micromixer. △ Less

Submitted 13 September, 2018; v1 submitted 17 April, 2018; originally announced April 2018.

Comments: There is an error in the Fig. 2. Error bar which is shown in the Fig should be 50 micron instead of 350 micron

Electrothermally modulated stop-go microvalves for capillary transport systems

Authors: Golak Kunti, Debabrata DasGupta, Anandaroop Bhattacharya, Suman Chakraborty

Abstract: In this article, we show a novel approach to implementing valving action in a dynamically evolving capillary filling process, by exploiting alternating current electrothermal (ACET) mechanism. The surfaces of the top and bottom walls of the capillary are asymmetrically patched with two different wettabilities. Our observations reveal that by exploiting an intricate interplay of the electrothermal… ▽ More In this article, we show a novel approach to implementing valving action in a dynamically evolving capillary filling process, by exploiting alternating current electrothermal (ACET) mechanism. The surfaces of the top and bottom walls of the capillary are asymmetrically patched with two different wettabilities. Our observations reveal that by exploiting an intricate interplay of the electrothermal effects and interfacial tension modulation, the acceleration-deceleration motion of the interface and interface pinning at specific locations may be delicately tuned. This, in turn, modulates the flow speed and residence time of the interface at designated locations, with a simple tuning of the frequency of the electrical signal. The present study, thus, unveils a novel micro valving mechanism achieved via effective manoeuvring of the interfacial electrochemistry where active and passive control mechanisms can be utilized simultaneously to achieve control over the interfacial motion of the two-phase system. This may bear far-reaching consequence in optimizing several applications in the bio-microfluidic domain, including devising novel miniaturized platforms for locally investigating reaction chemistries. △ Less

Submitted 17 April, 2018; originally announced April 2018.

Comments: 24 pages