-
Self Calibration by ON/OFF Sensitivity Switching - Feasibility Study of a Resonant Accelerometer
Authors:
Alexandra Zobova,
Slava Krylov
Abstract:
This research provides the theoretical feasibility study of a novel architecture of a MEMS differential resonant accelerometer, with switchable and tunable electrostatic transmission between the proof mass and the vibrating sensing beams. The same beams are used for sensing of the inertial force, while the transmission is switched ON, and for the device's calibration, when the transmission is OFF.…
▽ More
This research provides the theoretical feasibility study of a novel architecture of a MEMS differential resonant accelerometer, with switchable and tunable electrostatic transmission between the proof mass and the vibrating sensing beams. The same beams are used for sensing of the inertial force, while the transmission is switched ON, and for the device's calibration, when the transmission is OFF. Therefore, the beams' response in the OFF state is affected by the same factors (temperature, electronics, packaging) as in the ON state, with the only exception for the acceleration. This unique ability to physically disconnect the inertial force from the sensing elements opens possibilities for new schemes of the signal processing, including sensitivity tuning, zero-bias correction and on-the-fly self-calibration of the sensor. The device includes a proof mass (PM) and two force-transmitting frames that are attached to the substrate by the suspension springs, such that there is no direct mechanical connection between the PM and the frames. Two identical sensing beams are attached at their ends to the frames and the substrate. When the electrostatic transmission is switched ON by applying a voltage between the PM and frames, the force is transmitted from the PM through the frame to the beams. Disturbance in the electrostatic field, due to the acceleration-dependent displacement of the PM, results in the shift in the beam axial force and, therefore, in its resonant frequency, assuring the device's acceleration sensing. Furthermore, the change in the control voltage tunes the transmission of the input signal, and therefore the scale factor and the dynamic range of the sensor. An analytic model of the generic device is formulated and verified using finite elements analysis. The tunability of the device and the compensation of the scale factor thermal sensitivity are demonstrated using the model.
△ Less
Submitted 24 September, 2024;
originally announced September 2024.
-
Table-to-Text Generation with Pretrained Diffusion Models
Authors:
Aleksei S. Krylov,
Oleg D. Somov
Abstract:
Diffusion models have demonstrated significant potential in achieving state-of-the-art performance across various text generation tasks. In this systematic study, we investigate their application to the table-to-text problem by adapting the diffusion model to the task and conducting an in-depth analysis. Our experiments cover multiple aspects of diffusion models training. We explore sampling strat…
▽ More
Diffusion models have demonstrated significant potential in achieving state-of-the-art performance across various text generation tasks. In this systematic study, we investigate their application to the table-to-text problem by adapting the diffusion model to the task and conducting an in-depth analysis. Our experiments cover multiple aspects of diffusion models training. We explore sampling strategy influence by inducing recent diffusion model accelerator DPM-Solver++ into our core model. We have tested different prediction aggregation methods, like ROVER and Minimum Bayes-Risk (MBR). Our studies cover the impact of the pre-training phase in diffusion models and the generation length constraints influence. We also have compared diffusion model generation with auto-regressive text-to-text models with different temperature settings for diversity evaluation. Our key observation is that diffusion models demonstrate the balance between quality and diversity while auto-regressive text-to-text models are not successful at handling both at the same time. Furthermore, we found out that to achieve the highest quality possible, it is preferable to use a regular sampler with the strictest length constraint to create multiple samples, and then use MBR to aggregate the predictions. However, if you are prepared to give up high level of diversity and to accelerate the process, you can also utilize a fast sampler DPM-Solver++. Our findings reveal that diffusion models achieve comparable results in the table-to-text domain, highlighting their viability in the table-to-text challenge as a promising research direction.
△ Less
Submitted 10 September, 2024;
originally announced September 2024.
-
Piezoresistive snap-through detection for bifurcation-based MEMS sensors
Authors:
Ivan Litvinov,
Gal Spaer Milo,
Alexander Liberzon,
Slava Krylov
Abstract:
We report on the piezoresistive method for detecting stability loss events in microelectromechanical (MEMS) sensors based on bifurcation. The method involves measuring the resistivity changes of an entire beam to detect snap-through transitions in an electrostatically actuated, bistable double-clamped crystalline Silicon (Si) microbeam. The applicability of the suggested approach in two types of s…
▽ More
We report on the piezoresistive method for detecting stability loss events in microelectromechanical (MEMS) sensors based on bifurcation. The method involves measuring the resistivity changes of an entire beam to detect snap-through transitions in an electrostatically actuated, bistable double-clamped crystalline Silicon (Si) microbeam. The applicability of the suggested approach in two types of sensors - an ambient air temperature sensor or a mean air velocity sensor, is demonstrated. In both cases the bistable beam, serving as the sensing element, is affected by the electrothermal Joule's heating and air cooling. The measured signal is obtained by monitoring the critical voltages of the snap-through transitions. Piezoresistive sensing is especially suitable for the response monitoring of the exposed to the environment, free-standing heated microbeam sensors, where optical, piezoelectric, or electrostatic interrogation methods are not applicable. The approach can be implemented in various bifurcation microsensors and for response monitoring of bistable actuators.
△ Less
Submitted 26 May, 2024; v1 submitted 24 December, 2023;
originally announced December 2023.
-
Effect of Overheat and Direct Flow Loading on the MEMS Bistable Flow Sensor
Authors:
Ivan Litvinov,
Dan Refaeli,
Alex Liberzon,
Slava Krylov
Abstract:
We present the findings from an experimental study of a MEMS flow sensor in which an initially curved, double-clamped bistable microbeam is the primary sensing element. Our research explores how the overheat ratio, direct flow loading, and turbulence-induced vibration affect the sequential snap-through (ST) buckling and snap-back (SB) release of an electrostatically actuated beam heated by an elec…
▽ More
We present the findings from an experimental study of a MEMS flow sensor in which an initially curved, double-clamped bistable microbeam is the primary sensing element. Our research explores how the overheat ratio, direct flow loading, and turbulence-induced vibration affect the sequential snap-through (ST) buckling and snap-back (SB) release of an electrostatically actuated beam heated by an electric current. The sensor is fabricated from highly doped single-crystal silicon using a silicon-on-insulator (SOI) wafer. Positioned at the chip's edge, the microbeam is exposed to airflow, enabling concurrent dynamic response measurements with a laser Doppler vibrometer and a video camera. Our research demonstrates that the overheat ratio can be significantly lower for this sensing principle than conventional thermal sensing elements, pointing to the potential for substantial energy savings. We also emphasize the significant impact of flow angles and vibrations on the critical ST and SB voltages, which are vital for the flow sensor's output. Additionally, we introduce the first direct experimental observation of the beam profile's time history during the snap-through /snap-back transition. The potential impact of this research lies in developing more robust MEMS flow sensors with enhanced sensitivity and a better understanding of their response to environmental factors, which could have broader applications in fields such as aerospace, environmental monitoring, and industrial process control.
△ Less
Submitted 26 May, 2024; v1 submitted 20 December, 2023;
originally announced December 2023.
-
Thermal Raman study of Li4Ti5O12 and discussion about the number of its characteristic bands
Authors:
Aleksey A. Nikiforov,
Alexander S. Krylov,
Svetlana N. Krylova,
Vadim S. Gorshkov,
Dmitry V. Pelegov
Abstract:
Lithium battery industry is booming, and this fast growth should be supported by developing industry friendly tools to control the quality of positive and negative electrode materials. Raman spectroscopy was shown to be a cost effective and sensitive instrument to study defects and heterogeneities in lithium titanate, popular negative electrode material for high power applications, but there are s…
▽ More
Lithium battery industry is booming, and this fast growth should be supported by developing industry friendly tools to control the quality of positive and negative electrode materials. Raman spectroscopy was shown to be a cost effective and sensitive instrument to study defects and heterogeneities in lithium titanate, popular negative electrode material for high power applications, but there are still some points to be clarified. This work presents a detailed thermal Raman study for lithium titanate and discusses the difference of the number of predicted and experimentally observed Raman-active bands. The low temperature study and the analysis of thermal shifts of bands positions during heating let us to conclude about advantages of the proposed approach with surplus bands and recommend using shifts of major band to estimate the sample heating.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Laser-induced magnonic band gap formation and control in YIG/GaAs heterostructure
Authors:
K. Bublikov,
M. Mruczkiewicz,
E. N. Beginin,
M. Tapajna,
D. Gregušová,
M. Kučera,
F. Gucmann,
S. Krylov,
A. I. Stognij,
S. Korchagin,
S. A. Nikitov,
A. V. Sadovnikov
Abstract:
We demonstrate the laser-induced control over spin-wave (SW) transport in the magnonic crystal (MC) waveguide formed from the semiconductor slab placed on the ferrite film. We considered bilayer MC with periodical grooves performed on the top of the n-type gallium arsenide slab side that oriented to the yttrium iron garnet film. To observe the appearance of magnonic gap induced by laser radiation,…
▽ More
We demonstrate the laser-induced control over spin-wave (SW) transport in the magnonic crystal (MC) waveguide formed from the semiconductor slab placed on the ferrite film. We considered bilayer MC with periodical grooves performed on the top of the n-type gallium arsenide slab side that oriented to the yttrium iron garnet film. To observe the appearance of magnonic gap induced by laser radiation, the fabricated structure was studied by the use of microwave spectroscopy and Brillouin light-scattering. We perform detailed numerical studies of this structure. We showed that the optical control of the magnonic gaps (frequency width and position) is related to the variation of the charge carriers' concentration in GaAs. We attribute these to nonreciprocity of SW transport in the layered structure. Nonreciprocity was induced by the laser exposure of the GaAs slab due to SWs' induced electromagnetic field screening by the optically-generated charge carriers. We showed that SW dispersion, nonreciprocity, and magnonic band gap position and width in the ferrite-semiconductor magnonic crystal can be modified in a controlled manner by laser radiation. Our results show the possibility of the integration of magnonics and semiconductor electronics on the base of YIG/GaAs structures.
△ Less
Submitted 10 February, 2023;
originally announced February 2023.
-
Topological Pauli Phase and Fractional Quantization of Orbital Angular Momentum in the Problems of Classical and Quantum Physics
Authors:
K. S. Krylov,
V. M. Kuleshov,
Yu. E. Lozovik,
V. D. Mur
Abstract:
Physical problems for which the existence of non-trivial topological Pauli phase (i.e. fractional quantization of angular orbital angular momenta that is possible in 2D case) is essential are discussed within the framework of two-dimensional Helmholtz, Schroedinger and Dirac equations.
As examples in classical field theory we consider a "wedge problem" -- a description of a field generated by a…
▽ More
Physical problems for which the existence of non-trivial topological Pauli phase (i.e. fractional quantization of angular orbital angular momenta that is possible in 2D case) is essential are discussed within the framework of two-dimensional Helmholtz, Schroedinger and Dirac equations.
As examples in classical field theory we consider a "wedge problem" -- a description of a field generated by a point charge between two conducting half-planes -- and a Fresnel diffraction from knife-edge.
In few-electron circular quantum dots the choice between integer and half-integer quantization of orbital angular momenta is defined by the Pauli principle. This is in line with precise experimental data for the ground state energy of such quantum dots in a perpendicular magnetic field.
In a gapless graphene, as in the case of gapped one, in the presence of overcharged impurity this problem can be solved experimentally, e.g., using the method of scanning tunnel spectroscopy.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
3D IoU-Net: IoU Guided 3D Object Detector for Point Clouds
Authors:
Jiale Li,
Shujie Luo,
Ziqi Zhu,
Hang Dai,
Andrey S. Krylov,
Yong Ding,
Ling Shao
Abstract:
Most existing point cloud based 3D object detectors focus on the tasks of classification and box regression. However, another bottleneck in this area is achieving an accurate detection confidence for the Non-Maximum Suppression (NMS) post-processing. In this paper, we add a 3D IoU prediction branch to the regular classification and regression branches. The predicted IoU is used as the detection co…
▽ More
Most existing point cloud based 3D object detectors focus on the tasks of classification and box regression. However, another bottleneck in this area is achieving an accurate detection confidence for the Non-Maximum Suppression (NMS) post-processing. In this paper, we add a 3D IoU prediction branch to the regular classification and regression branches. The predicted IoU is used as the detection confidence for NMS. In order to obtain a more accurate IoU prediction, we propose a 3D IoU-Net with IoU sensitive feature learning and an IoU alignment operation. To obtain a perspective-invariant prediction head, we propose an Attentive Corner Aggregation (ACA) module by aggregating a local point cloud feature from each perspective of eight corners and adaptively weighting the contribution of each perspective with different attentions. We propose a Corner Geometry Encoding (CGE) module for geometry information embedding. To the best of our knowledge, this is the first time geometric embedding information has been introduced in proposal feature learning. These two feature parts are then adaptively fused by a multi-layer perceptron (MLP) network as our IoU sensitive feature. The IoU alignment operation is introduced to resolve the mismatching between the bounding box regression head and IoU prediction, thereby further enhancing the accuracy of IoU prediction. The experimental results on the KITTI car detection benchmark show that 3D IoU-Net with IoU perception achieves state-of-the-art performance.
△ Less
Submitted 10 April, 2020;
originally announced April 2020.
-
On the resonances near the continua boundaries of the Dirac equation with a short-range interaction
Authors:
K. S. Krylov,
V. D. Mur,
A. M. Fedotov
Abstract:
Using the model of a deep spherically symmetric rectangular well as an example, it is shown that resonant scattering near the boundaries of the lower or upper Dirac continua cannot serve as evidence in favor of spontaneous electron-positron pair production in a supercritical domain.
Using the model of a deep spherically symmetric rectangular well as an example, it is shown that resonant scattering near the boundaries of the lower or upper Dirac continua cannot serve as evidence in favor of spontaneous electron-positron pair production in a supercritical domain.
△ Less
Submitted 11 October, 2019;
originally announced October 2019.
-
Flow sensor based on the snap-through detection of a curved micromechanical beam
Authors:
Yoav Kessler,
Robert Ilic,
Slava Krylov,
Alex Liberzon
Abstract:
We report on a flow velocity measurement technique based on snap-through detection of an electrostatically actuated, bistable micromechanical beam. We show that induced elecro-thermal Joule heating and the convective air cooling change the beam curvature and consequently the critical snap-through voltage ($V_{ST}$). Using single crystal silicon beams, we demonstrate the snap-through voltage to flo…
▽ More
We report on a flow velocity measurement technique based on snap-through detection of an electrostatically actuated, bistable micromechanical beam. We show that induced elecro-thermal Joule heating and the convective air cooling change the beam curvature and consequently the critical snap-through voltage ($V_{ST}$). Using single crystal silicon beams, we demonstrate the snap-through voltage to flow velocity sensitivity of $dV_{\text{ST}}/du \approx0.13$ V s m$^{-1}$ with a power consumption of $\approx360\; μ$W. Our experimental results were in accord with the reduced order, coupled, thermo-electro-mechanical model prediction. We anticipate that electrostatically induced snap-through in curved, micromechanical beams will open new directions for the design and implementation of downscaled flow sensors for autonomous applications and environmental sensors.
△ Less
Submitted 14 June, 2018;
originally announced June 2018.
-
Generalization of Phonon Confinement Model for Interpretation of Raman Line-Shape from Nano-Silicon
Authors:
Manushree Tanwar,
Priyanka Yogi,
Simran Lambora,
Suryakant Mishra,
Shailendra K. Saxena,
Pankaj R Sagdeo,
Alexander S. Krylov,
Rajesh Kumar
Abstract:
A comparative analysis of two Raman line-shape functions has been carried out to validate the true representation of experimentally observed Raman scattering data for semiconducting nanomaterials. A modified form of already existing phonon confinement model incorporates two basic considerations, phonon momentum conservation and shift in zone centre phonon frequency. After incorporation of the abov…
▽ More
A comparative analysis of two Raman line-shape functions has been carried out to validate the true representation of experimentally observed Raman scattering data for semiconducting nanomaterials. A modified form of already existing phonon confinement model incorporates two basic considerations, phonon momentum conservation and shift in zone centre phonon frequency. After incorporation of the above mentioned two factors, a rather symmetric Raman line-shape is generated which is in contrary to the usual asymmetric Raman line-shapes obtained from nanostructured semiconductor. By fitting an experimentally observed Raman scattering data from silicon nanostructures, prepared by metal induced etching, it can be established that the Raman line-shape obtained within the framework of phonon confinement model is a true representative Raman line-shape of sufficiently low dimensions semiconductors.
△ Less
Submitted 30 November, 2017;
originally announced November 2017.
-
A Computational Resolution of the Inverse Problem of Kinetic Capillary Electrophoresis (KCE)
Authors:
József Vass,
Sergey N. Krylov
Abstract:
Determining kinetic rate constants is a highly relevant problem in biochemistry, so various methods have been designed to extract them from experimental data. Such methods have two main components: the experimental apparatus and the subsequent analysis, the latter often dependent on mathematical theory. Thus the theoretical approach taken influences the effectiveness of constant determination. A c…
▽ More
Determining kinetic rate constants is a highly relevant problem in biochemistry, so various methods have been designed to extract them from experimental data. Such methods have two main components: the experimental apparatus and the subsequent analysis, the latter often dependent on mathematical theory. Thus the theoretical approach taken influences the effectiveness of constant determination. A computational inverse problem approach is hereby presented, which does not merely give a single rough approximation of the sought constants, but is inherently capable of determining them from exact signals to arbitrary accuracy. This approach is thus not merely novel, but opens a whole new category of solution approaches in the field, enabled primarily by an efficient direct solver.
△ Less
Submitted 2 August, 2017; v1 submitted 25 July, 2017;
originally announced July 2017.
-
Estimating Kinetic Rate Constants and Plug Concentration Profiles from Simulated KCE Electropherogram Signals
Authors:
József Vass,
Sergey N. Krylov
Abstract:
Kinetic rate constants fundamentally characterize the dynamics of the chemical interaction of macromolecules, and thus their study sets a major direction in experimental biochemistry. The estimation of such constants is often challenging, partly due to the noisiness of data, and partly due to the theoretical framework. Novel and qualitatively reasonable methods are presented for the estimation of…
▽ More
Kinetic rate constants fundamentally characterize the dynamics of the chemical interaction of macromolecules, and thus their study sets a major direction in experimental biochemistry. The estimation of such constants is often challenging, partly due to the noisiness of data, and partly due to the theoretical framework. Novel and qualitatively reasonable methods are presented for the estimation of the rate constants of complex formation and dissociation in Kinetic Capillary Electrophoresis (KCE). This also serves the broader effort to resolve the inverse problem of KCE, where these estimates pose as initial starting points in the non-linear optimization space, along with the asymmetric Gaussian parameters describing the injected plug concentration profiles, which is also hereby estimated. This rate constant estimation method is also compared to an earlier one.
△ Less
Submitted 2 August, 2017; v1 submitted 25 July, 2017;
originally announced July 2017.
-
A Fast Stable Discretization of the Constant-Convection-Diffusion-Reaction Equations of Kinetic Capillary Electrophoresis (KCE)
Authors:
József Vass,
Sergey N. Krylov
Abstract:
A discretization scheme is introduced for a set of convection-diffusion equations with a non-linear reaction term, where the convection velocity is constant for each reactant. This constancy allows a transformation to new spatial variables, which ensures the global stability of discretization. Convection-diffusion equations are notorious for their lack of stability, arising from the algebraic inte…
▽ More
A discretization scheme is introduced for a set of convection-diffusion equations with a non-linear reaction term, where the convection velocity is constant for each reactant. This constancy allows a transformation to new spatial variables, which ensures the global stability of discretization. Convection-diffusion equations are notorious for their lack of stability, arising from the algebraic interaction of the convection and diffusion terms. Unexpectedly, our implemented numerical algorithm proves to be faster than computing exact solutions derived for a special case, while remaining reasonably accurate, as demonstrated in our runtime and error analysis.
△ Less
Submitted 17 September, 2017; v1 submitted 17 November, 2016;
originally announced November 2016.
-
Flow sensing by buckling monitoring of electrothermally actuated double-clamped micro beams
Authors:
Yoav Kessler,
Slava Krylov,
Alex Liberzon
Abstract:
We report on a flow sensing approach based on deflection monitoring of micro beams buckled by the compressive thermal stress due to electrothermal Joules heating. The air stream convectively cooling the device affects both the critical buckling values of the electric current and the postbuckling deflections of the structure. After calibration, the flow velocity was obtained from the deflections me…
▽ More
We report on a flow sensing approach based on deflection monitoring of micro beams buckled by the compressive thermal stress due to electrothermal Joules heating. The air stream convectively cooling the device affects both the critical buckling values of the electric current and the postbuckling deflections of the structure. After calibration, the flow velocity was obtained from the deflections measurements. The quasi-static responses of 2000 microns long, 10 microns wide and 30 microns high single crystal silicon beam transduced using image processing were consistent with the prediction of the reduced order model, which couples thermoelectric, thermofluidic and structural domains. The deflection sensitivity of 1.5 microns/(m/s) and the critical current sensitivity of 0.4 mA/(m/s) were registered in the experiments. Our model and experimental results collectively demonstrate feasibility of the sensing approach and further suggest that simple, robust and potentially downscalable beam-type devices may have use in flow velocity and wall shear stress sensors.
△ Less
Submitted 18 May, 2016; v1 submitted 17 May, 2016;
originally announced May 2016.
-
Synchronous imaging for rapid visualization of complex vibration profiles in electromechanical microresonators
Authors:
Yoav Linzon,
Daniel J. Joe,
Slava Krylov,
Bojan Ilic,
Juraj Topolancik,
Jeevak M. Parpia,
Halrod G. Craighead
Abstract:
Synchronous imaging is used in dynamic space-domain vibration profile studies of capacitively driven, thin n+ doped poly-silicon microbridges oscillating at rf frequencies. Fast and high-resolution actuation profile measurements of micromachined resonators are useful when significant device nonlinearities are present. For example, bridges under compressive stress near the critical Euler value ofte…
▽ More
Synchronous imaging is used in dynamic space-domain vibration profile studies of capacitively driven, thin n+ doped poly-silicon microbridges oscillating at rf frequencies. Fast and high-resolution actuation profile measurements of micromachined resonators are useful when significant device nonlinearities are present. For example, bridges under compressive stress near the critical Euler value often reveal complex dynamics stemming from a state close to the onset of buckling. This leads to enhanced sensitivity of the vibration modes to external conditions, such as pressure, temperatures, and chemical composition, the global behavior of which is conveniently evaluated using synchronous imaging combined with spectral measurements. We performed an experimental study of the effects of high drive amplitude and ambient pressure on the resonant vibration profiles in electrically-driven microbridges near critical buckling. Numerical analysis of electrostatically driven post-buckled microbridges supports the richness of complex vibration dynamics that are possible in such micro-electromechanical devices.
△ Less
Submitted 31 October, 2011;
originally announced October 2011.
-
Characterization and performances of new indium loaded organic liquid scintillators, based on novel indium carboxilate compounds
Authors:
I. Barabanov,
L. Bezrukov,
C. Cattadori,
N. Danilov,
A. Di Vacri,
N. Ferrari,
V. Kornoukhov,
Y. S. Krylov,
N. Nesterova,
S. Nisi,
E. Yanovich
Abstract:
A novel formulation to dope organic liquid scintillators (OLS) with indium at concentrations up to 10% is presented: it is based on specific indium carboxylate compounds adequately synthesized. The produced In-OLS has been characterized: it has light yield 8500 ph/MeV at indium concentration 5.5% and light attenuation length of 2,5 m at wavelength of 430 nm. The scintillator properties were stab…
▽ More
A novel formulation to dope organic liquid scintillators (OLS) with indium at concentrations up to 10% is presented: it is based on specific indium carboxylate compounds adequately synthesized. The produced In-OLS has been characterized: it has light yield 8500 ph/MeV at indium concentration 5.5% and light attenuation length of 2,5 m at wavelength of 430 nm. The scintillator properties were stable during all time of investigation (~ 1 years). The produced In-OLS is compared to other In-OLS formulations and shows superior performances. The developed methodic to metal dope OLS can be easily extended to other metals as Gd, Nd, Cd.
△ Less
Submitted 12 November, 2007;
originally announced November 2007.
-
Evidence for contact delocalization in atomic scale friction
Authors:
D. Abel,
S. Yu. Krylov,
J. W. M. Frenken
Abstract:
We analyze an advanced two-spring model with an ultra-low effective tip mass to predict nontrivial and physically rich 'fine structure' in the atomic stick-slip motion in Friction Force Microscopy (FFM) experiments. We demonstrate that this fine structure is present in recent, puzzling experiments. This shows that the tip apex can be completely or partially delocalized, thus shedding new light o…
▽ More
We analyze an advanced two-spring model with an ultra-low effective tip mass to predict nontrivial and physically rich 'fine structure' in the atomic stick-slip motion in Friction Force Microscopy (FFM) experiments. We demonstrate that this fine structure is present in recent, puzzling experiments. This shows that the tip apex can be completely or partially delocalized, thus shedding new light on what is measured in FFM and, possibly, what can happen with the asperities that establish the contact between macroscopic sliding bodies.
△ Less
Submitted 20 July, 2007;
originally announced July 2007.
-
Letter of Intent for Double-CHOOZ: a Search for the Mixing Angle Theta13
Authors:
F. Ardellier,
I. Barabanov,
J. C. Barriere,
M. Bauer,
L. Bezrukov,
C. Buck,
C. Cattadori,
B. Courty,
M. Cribier,
F. Dalnoki-Veress,
N. Danilov,
H. de Kerret,
A. Di Vacri,
A. Etenko,
M. Fallot,
Ch. Grieb,
M. Goeger,
A. Guertin,
T. Kirchner,
Y. S. Krylov,
D. Kryn,
C. Hagner,
W. Hampel,
F. X. Hartmann,
P. Huber
, et al. (27 additional authors not shown)
Abstract:
Tremendous progress has been achieved in neutrino oscillation physics during the last few years. However, the smallness of the $\t13$ neutrino mixing angle still remains enigmatic. The current best constraint comes from the CHOOZ reactor neutrino experiment $\s2t13 < 0.2$ (at 90% C.L., for $\adm2=2.0 10^{-3} \text{eV}^2$). We propose a new experiment on the same site, Double-CHOOZ, to explore th…
▽ More
Tremendous progress has been achieved in neutrino oscillation physics during the last few years. However, the smallness of the $\t13$ neutrino mixing angle still remains enigmatic. The current best constraint comes from the CHOOZ reactor neutrino experiment $\s2t13 < 0.2$ (at 90% C.L., for $\adm2=2.0 10^{-3} \text{eV}^2$). We propose a new experiment on the same site, Double-CHOOZ, to explore the range of $\s2t13$ from 0.2 to 0.03, within three years of data taking. The improvement of the CHOOZ result requires an increase in the statistics, a reduction of the systematic error below one percent, and a careful control of the cosmic ray induced background. Therefore, Double-CHOOZ will use two identical detectors, one at $\sim$150 m and another at 1.05 km distance from the nuclear cores. The plan is to start data taking with two detectors in 2008, and to reach a sensitivity of 0.05 in 2009, and 0.03 in 2011.
△ Less
Submitted 14 May, 2004;
originally announced May 2004.
-
Rare-earth loaded liquid scintillator (for LENS experiment)
Authors:
I. R. Barabanov,
V. I. Beresnev,
V. N. Kornoukhov,
E. A. Yanovich,
G. T. Zatsepin,
N. A. Danilov,
G. V. Korpusov,
G. V. Kostikova,
Y. S. Krylov,
V. V. Yakshin
Abstract:
Rare-earth (Yb/Gd) complexes with neutral organophosphorus ligands are briefly discussed for their application in liquid scintillation technique. To evaluate the principle feasibility of a high rare-earth loaded scintillator, the ytterbium chloride complexes with tri-isoamylphosphine oxides were synthesized. Relative scintillation efficiency (RSE) for two Yb concentrations (78 and 88 g/L) was me…
▽ More
Rare-earth (Yb/Gd) complexes with neutral organophosphorus ligands are briefly discussed for their application in liquid scintillation technique. To evaluate the principle feasibility of a high rare-earth loaded scintillator, the ytterbium chloride complexes with tri-isoamylphosphine oxides were synthesized. Relative scintillation efficiency (RSE) for two Yb concentrations (78 and 88 g/L) was measured by means of the internal conversion electron exitation from Cs-137. The results obtained were 50 and 40% respectively.
△ Less
Submitted 11 August, 1999; v1 submitted 4 August, 1999;
originally announced August 1999.