-
Transition from viscoelastic to fracture-like peeling of pressure-sensitive adhesives
Authors:
Marion Grzelka,
Stefan Kooij,
Sander Woutersen,
Mokhtar Adda-Bedia,
Daniel Bonn
Abstract:
We investigate the process of the slow unrolling of a roll of typical pressure-sensitive adhesive, Scotch tape, under its own weight. Probing the peeling velocities down to nm/s resolution, which is three orders of magnitudes lower than earlier measurements, we find that the speed is still non-zero. Moreover, the velocity is correlated to the relative humidity. A humidity increase leads to water u…
▽ More
We investigate the process of the slow unrolling of a roll of typical pressure-sensitive adhesive, Scotch tape, under its own weight. Probing the peeling velocities down to nm/s resolution, which is three orders of magnitudes lower than earlier measurements, we find that the speed is still non-zero. Moreover, the velocity is correlated to the relative humidity. A humidity increase leads to water uptake, making the adhesive weaker and easier to peel. At very low humidity, the adhesive becomes so stiff that it mainly responds elastically, leading to a peeling process akin to interfacial fracture. We provide a quantitative understanding of the peeling velocity in the two regimes.
△ Less
Submitted 19 January, 2022; v1 submitted 20 July, 2021;
originally announced July 2021.
-
Wetting of two-component drops: Marangoni contraction versus autophobing
Authors:
Michiel A. Hack,
Wojciech Kwieciński,
Olinka Ramírez-Soto,
Tim Segers,
Stefan Karpitschka,
E. Stefan Kooij,
Jacco H. Snoeijer
Abstract:
The wetting properties of multi-component liquids are crucial to numerous industrial applications. The mechanisms that determine the contact angles for such liquids remain poorly understood, with many intricacies arising due to complex physical phenomena, for example due to the presence of surfactants. Here, we consider two-component drops that consist of mixtures of vicinal alkane diols and water…
▽ More
The wetting properties of multi-component liquids are crucial to numerous industrial applications. The mechanisms that determine the contact angles for such liquids remain poorly understood, with many intricacies arising due to complex physical phenomena, for example due to the presence of surfactants. Here, we consider two-component drops that consist of mixtures of vicinal alkane diols and water. These diols behave surfactant-like in water. However, the contact angles of such mixtures on solid substrates are surprisingly large. We experimentally reveal that the contact angle is determined by two separate mechanisms of completely different nature, namely Marangoni contraction (hydrodynamic) and autophobing (molecular). It turns out that the length of the alkyl tail of the alkane diol determines which mechanism is dominant, highlighting the intricate coupling between molecular physics and the macroscopic wetting of complex fluids.
△ Less
Submitted 20 May, 2020;
originally announced May 2020.
-
Droplet impact of Newtonian fluids and blood on simple fabrics: effect of fabric pore size and underlying substrate
Authors:
T. C. de Goede,
A. M. Moqaddam,
K. C. M. Limpens,
S. A. Kooij,
D. Derome,
J. Carmeliet,
N. Shahidzadeh,
D. Bonn
Abstract:
When a droplet impacts a fabric mesh at a sufficiently high impact velocity, it not only spreads over the fabric but also penetrate its pores. To determine the influence of this liquid penetration of the fabric on droplet spreading on thin fabric meshes, we measured the droplet spreading ratio on fabric with and without an underlying substrate using a high-speed camera. For fabrics without a subst…
▽ More
When a droplet impacts a fabric mesh at a sufficiently high impact velocity, it not only spreads over the fabric but also penetrate its pores. To determine the influence of this liquid penetration of the fabric on droplet spreading on thin fabric meshes, we measured the droplet spreading ratio on fabric with and without an underlying substrate using a high-speed camera. For fabrics without a substrate, the droplet spreading ratio is reduced as the fabric penetration by the liquid reduces the droplet volume spreading on top of the fabric. Using entropic lattice Boltzmann simulations, we find that the lower droplet spreading ratio on fabrics, both with and without a substrate, is due to an increase of viscous losses inside the droplet during spreading. Comparing droplet impact of blood with its Newtonian counterpart, we show that for spreading on fabrics, just like on smooth surfaces, blood can be approximated as a Newtonian fluid.
△ Less
Submitted 2 January, 2020;
originally announced January 2020.
-
Mechanical properties of fat-based semi solid heterogeneous materials
Authors:
Henri de Cagny,
Stefan Kooij,
Theo Blijdenstein,
Luben Arnaudov,
Simeon Stoyanov,
Daniel Bonn
Abstract:
Fat based pasty products are an essential part of food industries, both as process intermediate or end products. Such materials are made of a continuous fat phase in which solid particles are dispersed. Phenomena such as yield and fracture occur in those materials and depend heavily on the composition of the samples. The crystallization of fat is altered in presence of particle, which leads to pro…
▽ More
Fat based pasty products are an essential part of food industries, both as process intermediate or end products. Such materials are made of a continuous fat phase in which solid particles are dispersed. Phenomena such as yield and fracture occur in those materials and depend heavily on the composition of the samples. The crystallization of fat is altered in presence of particle, which leads to products with different physical properties. However, because of the very complex aspect of the problem, very few studies have been trying to characterize the influence of the solid particles on the final product. Small amplitude oscillatory rheology is often used to characterize the stiffness of the materials. But processed products might not meet the desired shape necessary to perform rheology experiment, which require a very specific product shape that might not be easily achievable when it comes to industrial trials. Oscillatory rheology is therefore not always the best option to measure the physical properties of hard fat mixes. In this paper, we formulate binary mixes consisting of a hard fat matrix in which we added solid inclusions of sodium chloride. We create various set of samples with different salt and fat volume fraction and let them crystallize for a few weeks. We then perform various micro indentation protocols on the resulting samples. We then elaborate a small rheology model that is in accord with the data, and is able to predict the small deformation of heterogeneous materials indented by various shapes and loading protocols. We derive various physical quantities from this model such as the storage and loss moduli. We conclude by stating that the complex modulus of the binary mix grows with the solid volume fraction, following the classical Krieger Dougherty empirical law (similarly to suspensions), to finally diverge at a given volume fraction.
△ Less
Submitted 1 December, 2019;
originally announced December 2019.
-
Evaporation of dilute sodium dodecyl sulfate droplets on a hydrophobic substrate
Authors:
Wojciech Kwieciński,
Tim Segers,
Sjoerd van der Werf,
Arie van Houselt,
Detlef Lohse,
Harold J. W. Zandvliet,
Stefan Kooij
Abstract:
Evaporation of surfactant laden sessile droplets is omnipresent in nature and industrial applications such as inkjet printing. Soluble surfactants start to form micelles in an aqueous solution for surfactant concentrations exceeding the critical micelle concentration (CMC). Here, the evaporation of aqueous sodium dodecyl sulfate (SDS) sessile droplets on hydrophobic surfaces were experimentally in…
▽ More
Evaporation of surfactant laden sessile droplets is omnipresent in nature and industrial applications such as inkjet printing. Soluble surfactants start to form micelles in an aqueous solution for surfactant concentrations exceeding the critical micelle concentration (CMC). Here, the evaporation of aqueous sodium dodecyl sulfate (SDS) sessile droplets on hydrophobic surfaces were experimentally investigated for SDS concentrations ranging from 0.025 to 1 CMC. In contrast to the constant contact angle of an evaporating sessile water droplet, we observed that, at the same surface the contact angle of an SDS laden droplet with a concentration below 0.5 CMC first decreases, then increases, and finally decreases resulting in a local contact angle minimum. Surprisingly, the minimum contact angle was found to be substantially lower than the static receding contact angle and it decreased with decreasing initial SDS concentration. Furthermore, the bulk SDS concentration at the local contact angle minimum was found to decrease with a decrease in the initial SDS concentration. The location of the observed contact angle minimum relative to the normalized evaporation time and its minimum value proved to be independent of both the relative humidity and the droplet volume and thus, of the total evaporation time. We discuss the observed contact angle dynamics in terms of the formation of a disordered layer of SDS molecules on the substrate at concentrations below 0.5 CMC. The present work underlines the complexity of the evaporation of sessile liquid-surfactant droplets and the influence of surfactant-substrate interactions on the evaporation process.
△ Less
Submitted 26 August, 2019;
originally announced September 2019.
-
How surfactants influence the drop size in sprays
Authors:
R. Sijs,
S. Kooij,
D. Bonn
Abstract:
Spraying is a widely used method to produce a liquid sheet that break up into droplets of a certain size distribution. When spraying simple liquids, it is known which experimental parameters determine the droplet size distribution. For many applications however, surfactants are added, producing a hitherto unknown effect on the droplet size distribution. Using two generic types of spraying nozzles,…
▽ More
Spraying is a widely used method to produce a liquid sheet that break up into droplets of a certain size distribution. When spraying simple liquids, it is known which experimental parameters determine the droplet size distribution. For many applications however, surfactants are added, producing a hitherto unknown effect on the droplet size distribution. Using two generic types of spraying nozzles, we sprayed solutions of different types of aqueous surfactants and measured the droplet size distribution of the sprays. We find that the breakup of surfactant solutions is similar to that of pure water but results in droplets that are on average smaller. The resulting droplet size distribution can be well described using the predictions for simple liquids provided that we replace the parameter of the equilibrium surface tension with the dynamic surface tension of the surfactant solution at a surface age of 20 ms, which is the characteristic time for destabilization and breakup of a liquid sheet. By rescaling them with the mean droplet size, the droplet size distributions of water and sprays with different concentrations of surfactants all collapse onto a single curve and can be well described using the compound Gamma function found previously for pure liquids.
△ Less
Submitted 23 July, 2019;
originally announced July 2019.
-
Characterizing nonaffinity upon decompression of soft-sphere packings
Authors:
Stefan Kooij,
Edan Lerner
Abstract:
Athermal elastic moduli of soft sphere packings are known to exhibit universal scaling properties near the unjamming point, most notably the vanishing of the shear-to-bulk moduli ratio $G/B$ upon decompression. Interestingly, the smallness of $G/B$ stems from the large nonaffinity of deformation-induced displacements under shear strains, compared to insignificant nonaffinity of displacements under…
▽ More
Athermal elastic moduli of soft sphere packings are known to exhibit universal scaling properties near the unjamming point, most notably the vanishing of the shear-to-bulk moduli ratio $G/B$ upon decompression. Interestingly, the smallness of $G/B$ stems from the large nonaffinity of deformation-induced displacements under shear strains, compared to insignificant nonaffinity of displacements under compressive strains. In this work we show using numerical simulations that the relative weights of the affine and nonaffine contributions to the bulk modulus, and their dependence on the proximity to the unjamming point, can qualitatively differ between different models that feature the same generic unjamming phenomenology. In canonical models of unjamming we observe that the ratio of the nonaffine to total bulk moduli $B_{na}/B$ approaches a constant upon decompression, while in other, less well-studied models, it vanishes. We show that the vanishing of $B_{na}/B$ in non-canonical models stems from the emergence of an invariance of net (zero) forces on the constituent particles to compressive strains at the onset of unjamming. We provide a theoretical scaling analysis that fully explains our numerical observations, and allows to predict the scaling behavior of $B_{na}/B$ upon unjamming, given the functional form of the pairwise interaction potential.
△ Less
Submitted 22 July, 2019;
originally announced July 2019.
-
Sprays from droplets impacting a mesh
Authors:
Stefan Kooij,
Ali Mazloomi Moqaddam,
Thijs C. de Goede,
Dominique Derome,
Jan Carmeliet,
Noushine Shahidzadeh,
Daniel Bonn
Abstract:
In liquid spray applications, the sprays are often created by the formation and destabilization of a liquid sheet or jet. The disadvantage of such atomization processes is that the breakup is often highly irregular, causing a broad distribution of droplet sizes. As these sizes are controlled by the ligament corrugation and size, a monodisperse spray should consist of ligaments that are both smooth…
▽ More
In liquid spray applications, the sprays are often created by the formation and destabilization of a liquid sheet or jet. The disadvantage of such atomization processes is that the breakup is often highly irregular, causing a broad distribution of droplet sizes. As these sizes are controlled by the ligament corrugation and size, a monodisperse spray should consist of ligaments that are both smooth and of equal size. A straightforward way of creating smooth and equally sized ligaments is by droplet impact on a mesh. In this work we show that this approach does however not produce monodisperse droplets, but instead the droplet size distribution is very broad, with a large number of small satellite drops. We demonstrate that the fragmentation is controlled by a jet instability, where initial perturbations caused by the injection process result in long-wavelength disturbances that determine the final ligament breakup. During destabilization the crests of these disturbances are connected by thin ligaments which are the leading cause of the large number of small droplets. A secondary coalescence process, due to small relative velocities between droplets, partly masks this effect by reducing the amount of small droplets. Of the many parameters in this system, we describe the effect of varying the mesh size, mesh rigidity, impact velocity, wetting properties, keeping the liquid properties the same by focusing on water droplets only. We further perform Lattice Boltzmann modeling of the impact process that reproduces key features seen in the experimental data.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Water Bottle Flipping Physics
Authors:
Pim J. Dekker,
Lumen A. G. Eek,
Mees M. Flapper,
Remco H. J. C. Horstink,
Anne R. Meulenkamp,
Jelle van der Meulen,
Stefan Kooij,
Jacco H. Snoeijer,
Alvaro Marin
Abstract:
The water bottle flipping challenge consists of spinning a bottle, partially filled with water, and making it land upright. It is quite a striking phenomenon, since at first sight it appears rather improbable that a tall rotating bottle could make such a stable landing. Here we analyze the physics behind the water bottle flip, based on experiments and an analytical model that can be used in the cl…
▽ More
The water bottle flipping challenge consists of spinning a bottle, partially filled with water, and making it land upright. It is quite a striking phenomenon, since at first sight it appears rather improbable that a tall rotating bottle could make such a stable landing. Here we analyze the physics behind the water bottle flip, based on experiments and an analytical model that can be used in the classroom. Our measurements show that the angular velocity of the bottle decreases dramatically, enabling a nearly vertical descent and a successful landing. The reduced rotation is due to an increase of the moment of inertia, caused by the in-flight redistribution of the water mass along the bottle. Experimental and analytical results are compared quantitatively, and we demonstrate how to optimize the chances for a successful landing.
△ Less
Submitted 20 September, 2018; v1 submitted 21 December, 2017;
originally announced December 2017.
-
Unjamming in models with analytic pairwise potentials
Authors:
Stefan Kooij,
Edan Lerner
Abstract:
The canonical models for studying the unjamming scenario in systems of soft repulsive particles assume pairwise potentials with a sharp cut-off in the interaction range. The sharp cut-off renders the potential non-analytic, but makes it possible to describe many properties of the solid in terms of the coordination number $z$, which has an unambiguous definition in these cases. Pairwise potentials…
▽ More
The canonical models for studying the unjamming scenario in systems of soft repulsive particles assume pairwise potentials with a sharp cut-off in the interaction range. The sharp cut-off renders the potential non-analytic, but makes it possible to describe many properties of the solid in terms of the coordination number $z$, which has an unambiguous definition in these cases. Pairwise potentials without a sharp cut-off in the interaction range have not been considered in this context, but are of interest for understanding the relevance of the unjamming phenomenology to systems in which such a cut-off cannot be assumed. In this work we explore two systems with such interactions: an inverse power law and an exponentially decaying pairwise potential, with the control parameters being the exponent (of the inverse power-law) for the former and the number density for the latter. Both systems are shown to exhibit the characteristic features of the unjamming transition, among which are the vanishing of the shear to bulk modulus ratio and the emergence of an excess of low-frequency vibrational modes. We establish a relation between the hydrostatic pressure to bulk modulus ratio and the distance to unjamming in each of our model systems. This allows us to predict the dependence of other key observables on the distance to unjamming. Our results provide the means for a quantitative estimation of the proximity of generic glass forming models to the unjamming transition in the absence of a clear-cut definition of the coordination number, and highlight the general irrelevance of nonaffine contributions to the bulk modulus.
△ Less
Submitted 10 October, 2016;
originally announced October 2016.
-
Exposing nanobubble-like objects to a degassed environment
Authors:
Robin P. Berkelaar,
Erik Dietrich,
Gerard A. M. Kip,
E. Stefan Kooij,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
The primary attribute of interest of surface nanobubbles is their unusual stability and a number of theories trying to explain this have been put forward. Interestingly, the dissolution of nanobubbles is a topic that did not receive a lot of attention yet. In this work we applied two different experimental procedures which should cause gaseous nanobubbles to completely dissolve. In our experiments…
▽ More
The primary attribute of interest of surface nanobubbles is their unusual stability and a number of theories trying to explain this have been put forward. Interestingly, the dissolution of nanobubbles is a topic that did not receive a lot of attention yet. In this work we applied two different experimental procedures which should cause gaseous nanobubbles to completely dissolve. In our experiments we nucleated nanobubble-like objects by putting a drop of water on HOPG using a plastic syringe and disposable needle. In method A, the nanobubble-like objects were exposed to a flow of degassed water (1.17 mg/l) for 96 hours. In method B, the ambient pressure was lowered in order to degas the liquid and the nanobubble-like objects. Interestingly, the nanobubble-like objects remained stable after exposure to both methods. After thorough investigation of the procedures and materials used during our experiments, we found that the nanobubble-like object were induced by the use of disposable needles in which PDMS contaminated the water. It is very important for the nanobubble community to be aware of the fact that, although features look and behave like nanobubbles, in some cases they might in fact be or induced by contamination. The presence of contamination could also resolve some inconsistencies found in the nanobubble literature.
△ Less
Submitted 24 May, 2016;
originally announced May 2016.
-
Stick-jump mode in surface droplet dissolution
Authors:
Erik Dietrich,
E. Stefan Kooij,
Xuehua Zhang,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
The analogy between evaporating surface droplets in air to dissolving long-chain alcohol droplets in water is worked out. We show that next to the three known modi for surface droplet evaporation or dissolution (constant contact angle mode, constant contact radius mode, and stick-slide mode), a fourth mode exists for small droplets on supposedly smooth substrates, namely the stick-jump mode: inter…
▽ More
The analogy between evaporating surface droplets in air to dissolving long-chain alcohol droplets in water is worked out. We show that next to the three known modi for surface droplet evaporation or dissolution (constant contact angle mode, constant contact radius mode, and stick-slide mode), a fourth mode exists for small droplets on supposedly smooth substrates, namely the stick-jump mode: intermittent contact line pinning causes the droplet to switch between sticking and jumping during the dissolution. We present experimental data and compare them to theory to predict the dissolution time in this stick-jump mode. We also explain why these jumps were easily observed for microscale droplets but not for larger droplets.
△ Less
Submitted 24 May, 2016;
originally announced May 2016.
-
Latent heat induced rotation limited aggregation in 2D ice nanocrystals
Authors:
Pantelis Bampoulis,
Martin H. Siekman,
E. Stefan Kooij,
Detlef Lohse,
Harold J. W. Zandvliet,
Bene Poelsema
Abstract:
The basic science responsible for the fascinating shapes of ice crystals and snowflakes is still not understood. Insufficient knowledge of the interaction potentials and the lack of relevant experimental access to the growth process are to blame for this failure. Here, we study the growth of fractal nanostructures in a two-dimensional (2D) system, intercalated between mica and graphene. Based on o…
▽ More
The basic science responsible for the fascinating shapes of ice crystals and snowflakes is still not understood. Insufficient knowledge of the interaction potentials and the lack of relevant experimental access to the growth process are to blame for this failure. Here, we study the growth of fractal nanostructures in a two-dimensional (2D) system, intercalated between mica and graphene. Based on our Scanning Tunneling Spectroscopy (STS) data we provide compelling evidence that these fractals are 2D ice. They grow while they are in material contact with the atmosphere at 20 $^{\circ}$C and without significant thermal contact to the ambient. The growth is studied in-situ, in real time and space at the nanoscale. We find that the growing 2D ice nanocrystals assume a fractal shape, which is conventionally attributed to Diffusion Limited Aggregation (DLA). However, DLA requires a low mass density mother phase, in contrast to the actual currently present high mass density mother phase. Latent heat effects and consequent transport of heat and molecules are found to be key ingredients for understanding the evolution of the snow (ice) flakes. We conclude that not the local availability of water molecules (DLA), but rather them having the locally required orientation is the key factor for incorporation into the 2D ice nanocrystal. In combination with the transport of latent heat we attribute the evolution of fractal 2D ice nanocrystals to local temperature dependent Rotation Limited Aggregation (RLA). The ice growth occurs under extreme supersaturation, i.e. the conditions closely resemble the natural ones for the growth of complex 2D snow (ice) flakes and we consider our findings crucial for solving the 'perennial' snow (ice) flake enigma.
△ Less
Submitted 25 April, 2016;
originally announced April 2016.
-
Role of natural convection in the dissolution of sessile droplets
Authors:
Erik Dietrich,
Sander Wildeman,
Claas Willem Visser,
Kevin Hofhuis,
E. Stefan Kooij,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
The dissolution process of small (initial (equivalent) radius $R_0 < 1$ mm) long-chain alcohol (of various types) sessile droplets in water is studied, disentangling diffusive and convective contributions. The latter can arise for high solubilities of the alcohol, as the density of the alcohol-water mixture is then considerably less as that of pure water, giving rise to buoyancy driven convection.…
▽ More
The dissolution process of small (initial (equivalent) radius $R_0 < 1$ mm) long-chain alcohol (of various types) sessile droplets in water is studied, disentangling diffusive and convective contributions. The latter can arise for high solubilities of the alcohol, as the density of the alcohol-water mixture is then considerably less as that of pure water, giving rise to buoyancy driven convection. The convective flow around the droplets is measured, using micro-particle image velocimetry ($μ$PIV) and the schlieren technique. When nondimensionalizing the system, we find a universal $Sh\sim Ra^{1/4}$ scaling relation for all alcohols (of different solubilities) and all droplets in the convective regime. Here Sh is the Sherwood number (dimensionless mass flux) and Ra the Rayleigh number (dimensionless density difference between clean and alcohol-saturated water). This scaling implies the scaling relation $τ_c \sim R^{5/4}$ of the convective dissolution time $τ_c$, which is found to agree with experimental data. We show that in the convective regime the plume Reynolds number (the dimensionless velocity) of the detaching alcohol-saturated plume follows $Re_p \sim Sc^{-1} Ra^{5/8}$, which is confirmed by the $μ$PIV data. Here, Sc is the Schmidt number. The convective regime exists when $Ra > Ra_t$, where $Ra_t = 12$ is the transition Ra-number as extracted from the data. For $Ra < Ra_t$ and smaller, convective transport is progressively overtaken by diffusion and the above scaling relations break down.
△ Less
Submitted 24 May, 2016; v1 submitted 20 January, 2016;
originally announced January 2016.
-
To see or not to see: Imaging surfactant coated nano--particles using HIM and SEM
Authors:
Gregor Hlawacek,
Imtiaz Ahmad,
Mark A. Smithers,
E. Stefan Kooij
Abstract:
Nano--particles are of great interest in fundamental and applied research. However, their accurate visualization is often difficult and the interpretation of the obtained images can be complicated. We present a comparative scanning electron microscopy and helium ion microscopy study of cetyltrimethylammonium--bromide (CTAB) coated gold nano--rods. Using both methods we show how the gold core as we…
▽ More
Nano--particles are of great interest in fundamental and applied research. However, their accurate visualization is often difficult and the interpretation of the obtained images can be complicated. We present a comparative scanning electron microscopy and helium ion microscopy study of cetyltrimethylammonium--bromide (CTAB) coated gold nano--rods. Using both methods we show how the gold core as well as the surrounding thin CTAB shell can selectively be visualized. This allows for a quantitative determination of the dimensions of the gold core or the CTAB shell. The obtained CTAB shell thickness of 1.0 nm--1.5 nm is in excellent agreement with earlier results using more demanding and reciprocal space techniques.
△ Less
Submitted 9 July, 2013; v1 submitted 26 April, 2013;
originally announced April 2013.
-
Surface bubble nucleation phase space
Authors:
James R. T. Seddon,
E. Stefan Kooij,
Bene Poelsema,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
Recent research has revealed several different techniques for nanoscopic gas nucleation on submerged surfaces, with findings seemingly in contradiction with each other. In response to this, we have systematically investigated the occurrence of surface nanobubbles on a hydrophobised silicon substrate for various different liquid temperatures and gas concentrations, which we controlled independently…
▽ More
Recent research has revealed several different techniques for nanoscopic gas nucleation on submerged surfaces, with findings seemingly in contradiction with each other. In response to this, we have systematically investigated the occurrence of surface nanobubbles on a hydrophobised silicon substrate for various different liquid temperatures and gas concentrations, which we controlled independently. We found that nanobubbles occupy a distinct region of this phase space, occurring for gas concentrations of approximately 100-110%. Below the nanobubble phase we did not detect any gaseous formations on the substrate, whereas micropancakes (micron wide, nanometer high gaseous domains) were found at higher temperatures and gas concentrations. We moreover find that supersaturation of dissolved gases is not a requirement for nucleation of bubbles.
△ Less
Submitted 26 October, 2010;
originally announced November 2010.
-
Electrolytically Generated Nanobubbles on HOPG Surfaces
Authors:
Shangjiong Yang,
Peichun Tsai,
E. Stefan Kooij,
Andrea Prosperetti,
Harold J. W. Zandvliet,
Detlef Lohse
Abstract:
Electrolysis of water is employed to produce surface nanobubbles on highly orientated pyrolytic graphite (HOPG) surfaces. Hydrogen (oxygen) nanobubbles are formed when the HOPG surface acts as negative (positive) electrode. Coverage and volume of the nanobubbles enhance with increasing voltage. The yield of hydrogen nanobubbles is much larger than the yield of oxygen nanobubbles. The growth of t…
▽ More
Electrolysis of water is employed to produce surface nanobubbles on highly orientated pyrolytic graphite (HOPG) surfaces. Hydrogen (oxygen) nanobubbles are formed when the HOPG surface acts as negative (positive) electrode. Coverage and volume of the nanobubbles enhance with increasing voltage. The yield of hydrogen nanobubbles is much larger than the yield of oxygen nanobubbles. The growth of the individual nanobubbles during the electrolysis process is recorded in time with the help of AFM measurements and correlated with the total current. Both the size of the individual nanobubbles and the total current saturate after typical 1 minute; then the nanobubbles are in a dynamic equilibrium, meaning that they do not further grow, in spite of ongoing gas production and nonzero current. The surface area of nanobubbles shows a good correlation with the nanobubble volume growth rate, suggesting that either the electrolytic gas emerges directly at the nanobubbles' surface, or it emerges at the electrode's surface and then diffuses through the nanobubbles' surface. Moreover, the experiments reveal that the time constants of the current and the aspect ratio of nanobubbles are the same under all conditions. Replacement of pure water by water containing a small amount of sodium chloride (0.01 M) allows for larger currents, but qualitatively gives the same results.
△ Less
Submitted 25 October, 2008;
originally announced October 2008.
