Showing 1–45 of 45 results for author: Komatsu, K

Observation of Declination Dependence in the Cosmic Ray Energy Spectrum

Authors: The Telescope Array Collaboration, R. U. Abbasi, T. Abu-Zayyad, M. Allen, J. W. Belz, D. R. Bergman, I. Buckland, W. Campbell, B. G. Cheon, K. Endo, A. Fedynitch, T. Fujii, K. Fujisue, K. Fujita, M. Fukushima, G. Furlich, Z. Gerber, N. Globus, W. Hanlon, N. Hayashida, H. He, K. Hibino, R. Higuchi, D. Ikeda, T. Ishii , et al. (101 additional authors not shown)

Abstract: We report on an observation of the difference between northern and southern skies of the ultrahigh energy cosmic ray energy spectrum with a significance of ${\sim}8σ$. We use measurements from the two largest experiments$\unicode{x2014}$the Telescope Array observing the northern hemisphere and the Pierre Auger Observatory viewing the southern hemisphere. Since the comparison of two measurements fr… ▽ More We report on an observation of the difference between northern and southern skies of the ultrahigh energy cosmic ray energy spectrum with a significance of ${\sim}8σ$. We use measurements from the two largest experiments$\unicode{x2014}$the Telescope Array observing the northern hemisphere and the Pierre Auger Observatory viewing the southern hemisphere. Since the comparison of two measurements from different observatories introduces the issue of possible systematic differences between detectors and analyses, we validate the methodology of the comparison by examining the region of the sky where the apertures of the two observatories overlap. Although the spectra differ in this region, we find that there is only a $1.8σ$ difference between the spectrum measurements when anisotropic regions are removed and a fiducial cut in the aperture is applied. △ Less

Submitted 12 June, 2024; originally announced June 2024.

Comments: 8 pages, 6 figures

Light induced magnetic order

Authors: T. Jauk, H. Hampel, J. Walowski, K. Komatsu, J. Kredl, E. I. Harris-Lee, J. K. Dewhurst, M. Münzenberg, S. Shallcross, S. Sharma, M. Schultze

Abstract: Heat and disorder are opponents of magnetism. This fact, expressed in Curie's law established more than a century ago, holds even in the highly non-equilibrium interaction of ultra-intense laser pulses with magnetic matter. In contradiction to this, here we demonstrate that optical excitation of a ferromagnet can abrogate the link between temperature and order and observe 100 femtosecond class las… ▽ More Heat and disorder are opponents of magnetism. This fact, expressed in Curie's law established more than a century ago, holds even in the highly non-equilibrium interaction of ultra-intense laser pulses with magnetic matter. In contradiction to this, here we demonstrate that optical excitation of a ferromagnet can abrogate the link between temperature and order and observe 100 femtosecond class laser pulses to drive a reduction in spin entropy, concomitant to an increase in spin polarization and magnetic moment persisting after relaxation back to local charge equilibrium. This both establishes disorder as an unexpected resource for magnetic control at ultrafast times and, by the provision of a purely electronic mechanism that does not involve reconfiguration of the crystal lattice, suggests a novel scheme for spin-based signal processing and information storage significantly faster than current methodology. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Metasurface-enabled non-orthogonal four-output polarization splitter for non-redundant full-Stokes imaging

Authors: Go Soma, Kento Komatsu, Chun Ren, Yoshiaki Nakano, Takuo Tanemura

Abstract: Imaging polarimetry plays an essential role in various fields since it imparts rich information that cannot be obtained through mere intensity and spectral measurements. To retrieve full Stokes parameters, at least four sensor pixels are required, each of which projects incident light to a different polarization state in the Stokes space. Conventional full-Stokes division-of-focal-plane (DoFP) cam… ▽ More Imaging polarimetry plays an essential role in various fields since it imparts rich information that cannot be obtained through mere intensity and spectral measurements. To retrieve full Stokes parameters, at least four sensor pixels are required, each of which projects incident light to a different polarization state in the Stokes space. Conventional full-Stokes division-of-focal-plane (DoFP) cameras realize this function by integrating angled polarizers and retarders on top of image sensors. Due to the inevitable absorption at the polarizers, however, the maximum efficiency of these schemes is limited to 50% in theory. Instead of polarizers, three sets of lossless polarization beam splitters can be used to achieve higher-efficiency polarimetry, however, at the cost of reduced spatial resolution due to the need for six redundant sensor pixels. In this paper, we reveal, for the first time to our knowledge, that low-loss four-output polarization splitting (without filtering) is possible using a single-layer dielectric metasurface. Although these four states are not orthogonal to each other, our metasurface enables simultaneous sorting and focusing onto four sensor pixels with an efficiency exceeding 50\%, which is not feasible by a simple combination of space-optic components. The designed metasurface composed of silicon nanoposts is fabricated to experimentally demonstrate complete retrieval of full Stokes parameters at the near-infrared wavelength range from 1500 to 1600 nm with $-$2.28-dB efficiency. Finally, simple imaging polarimetry is demonstrated using a 3$\times$4 superpixel array. △ Less

Submitted 17 May, 2024; originally announced May 2024.

Designing a polymerized phenalenyl tessellation molecule to realize a super-honeycomb antiferromagnetic S = 3/2 spin system

Authors: Kenshin Komatsu, Naoki Morishita, Motoharu Kitatani, Koichi Kusakabe

Abstract: In a multiply hydrogenated polymer of phenalenyl tessellation molecules (PTMs) where spatially overlapping zero modes appear, three parallelly spin-aligned electron spins per PTM are generated by the direct exchange interaction of the strongly correlated electron system, which we used to facilitate the molecular design of a two-dimensional (2D) S = 3/2 Heisenberg spin system on a honeycomb lattice… ▽ More In a multiply hydrogenated polymer of phenalenyl tessellation molecules (PTMs) where spatially overlapping zero modes appear, three parallelly spin-aligned electron spins per PTM are generated by the direct exchange interaction of the strongly correlated electron system, which we used to facilitate the molecular design of a two-dimensional (2D) S = 3/2 Heisenberg spin system on a honeycomb lattice. Density functional theory with the Wannierization method simulations of the electronic structure suggested that an array of nonbonding molecular orbitals (an array of zero modes) appears in the hydrogenated nanographene structure. Our evaluation of the onsite interaction strength indicated that each zero mode becomes half-filled with a spin-active electron by the electron correlation effect. The low-energy subspace of the obtained zero mode-tight-binding model implies the appearance of a 2D antiferromagnetic S = 3/2 Heisenberg system with the entangled quantum spin ground state. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Complete vectorial optical mode converter using multi-layer metasurface

Authors: Go Soma, Kento Komatsu, Yoshiaki Nakano, Takuo Tanemura

Abstract: A vectorial optical mode converter that can transform an orthogonal set of multiple input vector beams into another orthogonal set of vector beams is attractive for a wide range of applications in optics and photonics. While multi-plane light conversion (MPLC) and metasurface (MS) technologies have been explored to individually address multiple spatial mode conversion and polarization mode manipul… ▽ More A vectorial optical mode converter that can transform an orthogonal set of multiple input vector beams into another orthogonal set of vector beams is attractive for a wide range of applications in optics and photonics. While multi-plane light conversion (MPLC) and metasurface (MS) technologies have been explored to individually address multiple spatial mode conversion and polarization mode manipulation, there has been no universal methodology to simultaneously convert a set of multiple vectorial modes, having non-uniform spatial distributions in both their complex amplitude and polarization, to another set of multiple vectorial modes. In this paper, we demonstrate versatile devices based on the MPLC concept incorporating multi-layer locally birefringent MSs and present a general design formalism for complete vectorial mode conversion in arbitrary cases. The effectiveness of our proposed method is confirmed experimentally by demonstrating a 6-mode (3 spatial modes $\times$ 2 polarization modes) multiplexer, fabricated on a compact chip with a ~0.65 mm$^2$ lateral size in a folded MS configuration. Additionally, we verify its applicability to more advanced functional devices through numerical demonstration of a mode-division-multiplexed dual-polarization coherent receiver and spatial-mode-multiplexed vectorial holography. The versatility of our protocol makes it suitable for designing a myriad of multi-input-multi-output devices, providing a powerful tool for realizing universal optical mode converters for a wide range of applications. △ Less

Submitted 3 September, 2024; v1 submitted 10 January, 2024; originally announced January 2024.

Comments: 25 pages, 12 figures

Vibration characteristics of a continuously rotating superconducting magnetic bearing and potential influence to TES and SQUID

Authors: Shinya Sugiyama, Tommaso Ghigna, Yurika Hoshino, Nobuhiko Katayama, Satoru Katsuda, Kunimoto Komatsu, Tomotake Matsumura, Yuki Sakurai, Kosuke Sato, Ryota Takaku, Makoto Tashiro, Yukikatsu Terada

Abstract: We measured the vibration of a prototype superconducting magnetic bearing (SMB) operating at liquid nitrogen temperature. This prototype system was designed as a breadboard model for LiteBIRD low-frequency telescope (LFT) polarization modulator unit. We set an upper limit of the vibration amplitude at $36~\mathrm{μm}$ at the rotational synchronous frequency. During the rotation, the amplitude of t… ▽ More We measured the vibration of a prototype superconducting magnetic bearing (SMB) operating at liquid nitrogen temperature. This prototype system was designed as a breadboard model for LiteBIRD low-frequency telescope (LFT) polarization modulator unit. We set an upper limit of the vibration amplitude at $36~\mathrm{μm}$ at the rotational synchronous frequency. During the rotation, the amplitude of the magnetic field produced varies. From this setup, we compute the static and AC amplitude of the magnetic fields produced by the SMB magnet at the location of the LFT focal plane as $0.24~\mathrm{G}$ and $3\times10^{-5}$$~\mathrm{G}$, respectively. From the AC amplitude, we compute TES critical temperature variation of $7\times10^{-8}$$~\mathrm{K}$ and fractional change of the SQUID flux is $δΦ/Φ_0|_{ac}=3.1\times10^{-5}$. The mechanical vibration can be also estimated to be $3.6\times 10^{-2}$$~\mathrm{N}$ at the rotation mechanism location. △ Less

Submitted 21 October, 2022; originally announced October 2022.

Comments: 7 pages, 5 figures, accepted for publication in Journal of Low Temperature Physics

Journal ref: Journal of Low Temperature Physics (2022): 1-9

Testbed preparation of a small prototype polarization modulator for LiteBIRD low-frequency telescope

Authors: Thuong D. Hoang, Tomotake Matsumura, Ryota Takaku, Takashi Hasebe, Tommaso Ghigna, Nobuhiko Katayama, Yuki Sakurai, Kunimoto Komatsu, Teruhito Iida, Yurika Hoshino, Shinya Sugiyama, Hirokazu Ishino

Abstract: LiteBIRD is the Cosmic Microwave Background (CMB) radiation polarization satellite mission led by ISAS/JAXA. The main scientific goal is to search for primordial gravitational wave signals generated from the inflation epoch of the Universe. LiteBIRD telescopes employ polarization modulation units (PMU) using continuously rotating half-wave plates (HWP). The PMU is a crucial component to reach unpr… ▽ More LiteBIRD is the Cosmic Microwave Background (CMB) radiation polarization satellite mission led by ISAS/JAXA. The main scientific goal is to search for primordial gravitational wave signals generated from the inflation epoch of the Universe. LiteBIRD telescopes employ polarization modulation units (PMU) using continuously rotating half-wave plates (HWP). The PMU is a crucial component to reach unprecedented sensitivity by mitigating systematic effects, including 1/f noise. We have developed a 1/10 scale prototype PMU of the LiteBIRD LFT, which has a 5-layer achromatic HWP and a diameter of 50 mm, spanning the observational frequency range of 34-161 GHz. The HWP is mounted on a superconducting magnetic bearing (SMB) as a rotor and levitated by a high-temperature superconductor as a stator. In this study, the entire PMU system is cooled down to 10 K in the cryostat chamber by a 4-K Gifford-McMahon (GM) cooler. We propagate an incident coherent millimeter-wave polarized signal throughout the rotating HWP and detect the modulated signal. We study the modulated optical signal and any rotational synchronous signals from the rotation mechanism. We describe the testbed system and the preliminary data acquired from this setup. This testbed is built to integrate the broadband HWP PMU and evaluate the potential systematic effects in the optical data. This way, we can plan with a full-scale model, which takes a long time for preparation and testing. △ Less

Submitted 7 August, 2022; originally announced August 2022.

Modelling TES non-linearity induced by a rotating HWP in a CMB polarimeter

Authors: Tommaso Ghigna, Tomotake Matsumura, Yuki Sakurai, Ryota Takaku, Kunimoto Komatsu, Shinya Sugiyama, Yurika Hoshino, Nobuhiko Katayama

Abstract: Most upcoming CMB experiments are planning to deploy between a few thousand and a few hundred thousand TES bolometers in order to drastically increase sensitivity and unveil the B-mode signal. Differential systematic effects and $1/f$ noise are two of the challenges that need to be overcome in order to achieve this result. In recent years, rotating Half-Wave Plates have become increasingly more po… ▽ More Most upcoming CMB experiments are planning to deploy between a few thousand and a few hundred thousand TES bolometers in order to drastically increase sensitivity and unveil the B-mode signal. Differential systematic effects and $1/f$ noise are two of the challenges that need to be overcome in order to achieve this result. In recent years, rotating Half-Wave Plates have become increasingly more popular as a solution to mitigate these effects, especially for those experiments that are targeting the largest angular scales. However, other effects may appear when a rotating HWP is being employed. In this paper we focus on HWP synchronous signals, which are due to intensity to polarization leakage induced by a rotating cryogenic multi-layer sapphire HWP employed as the first optical element of the telescope system. We use LiteBIRD LFT as a case study and we analyze the interaction between these spurious signals and TES bolometers, to determine whether this signal can contaminate the bolometer response. We present the results of simulations for a few different TES model assumptions and different spurious signal amplitudes. Modelling these effects is fundamental to find what leakage level can be tolerated and minimize non-linearity effects of the bolometer response. △ Less

Submitted 4 August, 2022; originally announced August 2022.

Comments: 7 pages, 4 figures, submitted to the Journal of Low Temperature Physics: LTD19 Special Edition

Testing magnetic interference between TES detectors and the telescope environment for future CMB satellite missions

Authors: Tommaso Ghigna, Thuong Duc Hoang, Takashi Hasebe, Yurika Hoshino, Nobuhiko Katayama, Kunimoto Komatsu, Adrian Lee, Tomotake Matsumura, Yuki Sakurai, Shinya Sugiyama, Aritoki Suzuki, Christopher Raum, Ryota Takaku, Benjamin Westbrook

Abstract: The two most common components of several upcoming CMB experiments are large arrays of superconductive TES (Transition-Edge Sensor) detectors and polarization modulator units, e.g. continuously-rotating Half-Wave Plates (HWP). A high detector count is necessary to increase the instrument raw sensitivity, however past experiments have shown that systematic effects are becoming one of the main limit… ▽ More The two most common components of several upcoming CMB experiments are large arrays of superconductive TES (Transition-Edge Sensor) detectors and polarization modulator units, e.g. continuously-rotating Half-Wave Plates (HWP). A high detector count is necessary to increase the instrument raw sensitivity, however past experiments have shown that systematic effects are becoming one of the main limiting factors to reach the sensitivity required to detect primordial $B$-modes. Therefore, polarization modulators have become popular in recent years to mitigate several systematic effects. Polarization modulators based on HWP technologies require a rotating mechanism to spin the plate and modulate the incoming polarized signal. In order to minimize heat dissipation from the rotating mechanism, which is a stringent requirement particularly for a space mission like $LiteBIRD$, we can employ a superconductive magnetic bearing to levitate the rotor and achieve contactless rotation. A disadvantage of this technique is the associated magnetic fields generated by those systems. In this paper we investigate the effects on a TES detector prototype and find no detectable $T_c$ variations due to an applied constant (DC) magnetic field, and a non-zero TES response to varying (AC) magnetic fields. We quantify a worst-case TES responsivity to the applied AC magnetic field of $\sim10^5$ pA/G, and give a preliminary interpretation of the pick-up mechanism. △ Less

Submitted 28 July, 2022; v1 submitted 27 July, 2022; originally announced July 2022.

Comments: 11 pages, 9 figures, 2 tables, SPIE Astronomical Telescopes + Instrumentation 2022

Journal ref: Proc.SPIE Int.Soc.Opt.Eng. 12190 (2022) 1107

Performance of the polarization leakage correction in the PILOT data

Authors: J-Ph. Bernard, A. Bernard, H. Roussel, I. Choubani, D. Alina, J. Aumont, A. Hughes, I. Ristorcelli, S. Stever, T. Matsumura S. Sugiyama, K. Komatsu, G. de Gasperis, K. Ferriere, V. Guillet, N. Ysard, P. Ade, P. de Bernardis, N. Bray, B. Crane, J. P. Dubois, M. Griffin, P. Hargrave, Y. Longval, S. Louvel, B. Maffei , et al. (11 additional authors not shown)

Abstract: The Polarized Instrument for Long-wavelength Observation of the Tenuous interstellar medium (PILOT) is a balloon-borne experiment that aims to measure the polarized emission of thermal dust at a wavelength of 240 um (1.2 THz). The PILOT experiment flew from Timmins, Ontario, Canada in 2015 and 2019 and from Alice Springs, Australia in April 2017. The in-flight performance of the instrument during… ▽ More The Polarized Instrument for Long-wavelength Observation of the Tenuous interstellar medium (PILOT) is a balloon-borne experiment that aims to measure the polarized emission of thermal dust at a wavelength of 240 um (1.2 THz). The PILOT experiment flew from Timmins, Ontario, Canada in 2015 and 2019 and from Alice Springs, Australia in April 2017. The in-flight performance of the instrument during the second flight was described in Mangilli et al. 2019. In this paper, we present data processing steps that were not presented in Mangilli et al. 2019 and that we have recently implemented to correct for several remaining instrumental effects. The additional data processing concerns corrections related to detector cross-talk and readout circuit memory effects, and leakage from total intensity to polarization. We illustrate the above effects and the performance of our corrections using data obtained during the third flight of PILOT, but the methods used to assess the impact of these effects on the final science-ready data, and our strategies for correcting them will be applied to all PILOT data. We show that the above corrections, and in particular that for the intensity to polarization leakage, which is most critical for accurate polarization measurements with PILOT, are accurate to better than 0.4 % as measured on Jupiter during flight#3. △ Less

Submitted 7 May, 2022; originally announced May 2022.

Probing Cosmic Inflation with the LiteBIRD Cosmic Microwave Background Polarization Survey

Authors: LiteBIRD Collaboration, E. Allys, K. Arnold, J. Aumont, R. Aurlien, S. Azzoni, C. Baccigalupi, A. J. Banday, R. Banerji, R. B. Barreiro, N. Bartolo, L. Bautista, D. Beck, S. Beckman, M. Bersanelli, F. Boulanger, M. Brilenkov, M. Bucher, E. Calabrese, P. Campeti, A. Carones, F. J. Casas, A. Catalano, V. Chan, K. Cheung , et al. (166 additional authors not shown)

Abstract: LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is… ▽ More LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$μ$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects. △ Less

Submitted 27 March, 2023; v1 submitted 6 February, 2022; originally announced February 2022.

Comments: 155 pages, accepted for publication in PTEP

Mechanical strength and millimeter-wave transmittance spectrum of stacked sapphire plates bonded by sodium silicate solution

Authors: Takayuki Toda, Yuki Sakurai, Hirokazu Ishino, Tomotake Matsumura, Kunimoto Komatsu, Nobuhiko Katayama

Abstract: The polarization modulator unit for the low-frequency telescope in LiteBIRD employs an achromatic half-wave plate (AHWP). It consists of five layers of a-cut sapphire plate, which are stacked based on a Pancharatnam recipe. In this way, the retardance of the AHWP is a half-wave over a bandwidth of 34-161 GHz. The diameter of a single sapphire plate is about 500 mm and the thickness is 5 mm. When a… ▽ More The polarization modulator unit for the low-frequency telescope in LiteBIRD employs an achromatic half-wave plate (AHWP). It consists of five layers of a-cut sapphire plate, which are stacked based on a Pancharatnam recipe. In this way, the retardance of the AHWP is a half-wave over a bandwidth of 34-161 GHz. The diameter of a single sapphire plate is about 500 mm and the thickness is 5 mm. When a large diameter AHWP is used for a space mission, it is important for the AHWP to survive launch vibration. A preliminary study indicates that the five-layer stacked HWP has a risk of breakage at the launch unless the five layers are glued together and mechanically treated as one disk. We report our investigation using a sodium silicate solution that can bond the sapphire plates. This technique has been previously investigated as a candidate of cryogenic bonding for a mirror material, including sapphire, of the gravitational wave experiments: LIGO, VIRGO, and KAGRA. We experimentally studied the mechanical strength of the bonded interface for two different surface conditions: polished and unpolished. We demonstrated that the tensile and shear strength > 20 MPa for samples with a polished surface. This satisfied the requirement of 5.5 MPa derived from the mechanical simulation assuming a launch load of 30G. We identified that samples glued on a polished surface exhibit higher strength than unpolished ones by a factor of 2 for tensile and 18 for shear strength. We measured the millimeter-wave transmittance between 90 and 140 GHz using sapphire plates with a diameter of 50 mm before and after bonding. We did not find any optical effects caused by the bonded interface within 2% error in transmittance, which originates from the measurement system. △ Less

Submitted 15 October, 2021; originally announced October 2021.

Comments: 24 pages,10 figures

Non-redundant optical phased array

Authors: Taichiro Fukui, Ryota Tanomura, Kento Komatsu, Daiji Yamashita, Shun Takahashi, Yoshiaki Nakano, Takuo Tanemura

Abstract: Optical phased array (OPA) is a promising beam-steering device for various applications such as light detection and ranging (LiDAR), optical projection, free-space optical communication and switching. However, the previously reported OPAs suffer from either an insufficiently small number of resolvable points, or a complicated control requirement due to an extremely large number of phase shifters.… ▽ More Optical phased array (OPA) is a promising beam-steering device for various applications such as light detection and ranging (LiDAR), optical projection, free-space optical communication and switching. However, the previously reported OPAs suffer from either an insufficiently small number of resolvable points, or a complicated control requirement due to an extremely large number of phase shifters. This work introduces a novel array configuration for OPA devices based on the non-redundant array (NRA) concept. Based on this design, we can realize high-resolution OPA whose number of resolvable points scales with N2. In contrast, that of traditional OPAs scales only with N. Thus, a significant reduction in the number of required phase shifters can be attained without sacrificing the number of resolvable points. We first investigate the impact of employing the NRA theoretically by considering the autocorrelation function of the array layout. We then develop a Costas-array-based silicon OPA and experimentally demonstrate 2D beam steering with ~19,000 resolvable points using only 127 phase shifters. This corresponds to the largest number of resolvable points achieved by an OPA without sweeping the wavelength to the best of our knowledge. △ Less

Submitted 22 August, 2021; originally announced August 2021.

Journal ref: Optica 2021

Design of a frequency-independent optic axis Pancharatnam-based achromatic half-wave plate

Authors: Kunimoto Komatsu, Hirokazu Ishino, Nobuhiko Katayama, Tomotake Matsumura, Yuki Sakurai

Abstract: Pancharatnam-based achromatic half-wave plates (AHWP) achieve high polarization efficiency over a broad waveband. These AWHPs generally contain a property whereby the optic axis is dependent on the electromagnetic frequency of the incident radiation. When the AHWP is used to measure incident polarized radiation with a finite detection bandwidth, this frequency dependence causes an uncertainty in t… ▽ More Pancharatnam-based achromatic half-wave plates (AHWP) achieve high polarization efficiency over a broad waveband. These AWHPs generally contain a property whereby the optic axis is dependent on the electromagnetic frequency of the incident radiation. When the AHWP is used to measure incident polarized radiation with a finite detection bandwidth, this frequency dependence causes an uncertainty in the determination of the polarization angle due to the limited knowledge of the shape of the source spectrum and detection band. To mitigate this problem, we propose new designs of the AHWP which eliminate the frequency dependence of the optic axis over the bandwidth whilst maintaining high modulation efficiency. We carried out this optimization by tuning the relative angles among the individual half-wave plates of the five and nine layer AHWPs. The optimized set of relative angles achieves a frequency-independent optic axis over the fractional bandwidth, a bandwidth over which polarization efficiency is greater than 0.9, of 1.3 and 1.5 for the five and nine layer AHWPs, respectively. We also study the susceptibility of the alignment accuracy on the polarization efficiency and the frequency dependence of the optic axis, which provides a design guidance for each application. △ Less

Submitted 20 August, 2021; v1 submitted 12 May, 2021; originally announced May 2021.

Comments: 14 pages, 6 figures, Journal Astronomical Telescopes, Instruments, and Systems, accepted

Journal ref: J. Astron. Telesc. Instrum. Syst. 7(3), 034005 (2021)

Overview of the Medium and High Frequency Telescopes of the LiteBIRD satellite mission

Authors: L. Montier, B. Mot, P. de Bernardis, B. Maffei, G. Pisano, F. Columbro, J. E. Gudmundsson, S. Henrot-Versillé, L. Lamagna, J. Montgomery, T. Prouvé, M. Russell, G. Savini, S. Stever, K. L. Thompson, M. Tsujimoto, C. Tucker, B. Westbrook, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien , et al. (212 additional authors not shown)

Abstract: LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular… ▽ More LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD. △ Less

Submitted 1 February, 2021; originally announced February 2021.

Comments: SPIE Conference

Journal ref: Proc. of SPIE Vol. 11443 14432G (2020)

LiteBIRD: JAXA's new strategic L-class mission for all-sky surveys of cosmic microwave background polarization

Authors: M. Hazumi, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien, J. Austermann, C. Baccigalupi, A. J. Banday, R. Banjeri, R. B. Barreiro, S. Basak, J. Beall, D. Beck, S. Beckman, J. Bermejo, P. de Bernardis, M. Bersanelli, J. Bonis, J. Borrill, F. Boulanger, S. Bounissou, M. Brilenkov , et al. (213 additional authors not shown)

Abstract: LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave backgrou… ▽ More LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes. △ Less

Submitted 29 January, 2021; originally announced January 2021.

Comments: 20 pages, 9 figures

Journal ref: Proc. of SPIE Vol. 11443 114432F (2020)

Concept Design of Low Frequency Telescope for CMB B-mode Polarization satellite LiteBIRD

Authors: Y. Sekimoto, P. A. R. Ade, A. Adler, E. Allys, K. Arnold, D. Auguste, J. Aumont, R. Aurlien, J. Austermann, C. Baccigalupi, A. J. Banday, R. Banerji, R. B. Barreiro, S. Basak, J. Beall, D. Beck, S. Beckman, J. Bermejo, P. de Bernardis, M. Bersanelli, J. Bonis, J. Borrill, F. Boulanger, S. Bounissou, M. Brilenkov , et al. (212 additional authors not shown)

Abstract: LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray li… ▽ More LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented. △ Less

Submitted 15 January, 2021; originally announced January 2021.

Comments: 21 pages, 14 figures

Journal ref: SPIE proceedings 1145310 (2020)

Pressure-induced transition from Jeff=1/2 to S=1/2 states in CuAl2O4

Authors: Hwanbeom Cho, Choong H. Kim, Yongmoon Lee, Kazuki Komatsu, Byeong-Gwan Cho, Deok-Yong Cho, Taehun Kim, Chaebin Kim, Younghak Kim, Tae Yeong Koo, Yukio Noda, Hiroyuki Kagi, Daniel I. Khomskii, Donghoon Seoung, Je-Geun Park

Abstract: The spin-orbit entangled (SOE) Jeff-state has been a fertile ground to study novel quantum phenomena. Contrary to the conventional weakly correlated Jeff=1/2 state of 4d and 5d transition metal compounds, the ground state of CuAl2O4 hosts a Jeff=1/2 state with a strong correlation of Coulomb U. Here, we report that surprisingly Cu2+ ions of CuAl2O4 overcome the otherwise usually strong Jahn-Teller… ▽ More The spin-orbit entangled (SOE) Jeff-state has been a fertile ground to study novel quantum phenomena. Contrary to the conventional weakly correlated Jeff=1/2 state of 4d and 5d transition metal compounds, the ground state of CuAl2O4 hosts a Jeff=1/2 state with a strong correlation of Coulomb U. Here, we report that surprisingly Cu2+ ions of CuAl2O4 overcome the otherwise usually strong Jahn-Teller distortion and instead stabilize the SOE state, although the cuprate has relatively small spin-orbit coupling. From the x-ray absorption spectroscopy and high-pressure x-ray diffraction studies, we obtained definite evidence of the Jeff=1/2 state with a cubic lattice at ambient pressure. We also found the pressure-induced structural transition to a compressed tetragonal lattice consisting of the spin-only S=1/2 state for pressure higher than Pc=8 GPa. This phase transition from the Mott insulating Jeff=1/2 to the S=1/2 states is a unique phenomenon and has not been reported before. Our study offers a rare example of the SOE Jeff-state under strong electron correlation and its pressure-induced transition to the S=1/2 state. △ Less

Submitted 3 January, 2021; originally announced January 2021.

Comments: 13 pages, 4 figures

Journal ref: Phys. Rev. B 103, 081101 (2021)

Broadband, millimeter-wave anti-reflective structures on sapphire ablated with femto-second laser

Authors: R. Takaku, S. Hanany, H. Imada, H. Ishino, N. Katayama, K. Komatsu, K. Konishi, M. Kuwata-Gonokami, T. Matsumura, K. Mitsuda, H. Sakurai, Y. Sakurai, Q. Wen, N. Y. Yamasaki, K. Young, J. Yumoto

Abstract: We designed, fabricated, and measured anti-reflection coating (ARC) on sapphire that has 116% fractional bandwidth and transmission of at least 97% in the millimeter wave band. The ARC was based on patterning pyramid-like sub-wavelength structures (SWS) using ablation with a 15 W femto-second laser operating at 1030 nm. One side of each of two discs was fabricated with SWS that had a pitch of 0.54… ▽ More We designed, fabricated, and measured anti-reflection coating (ARC) on sapphire that has 116% fractional bandwidth and transmission of at least 97% in the millimeter wave band. The ARC was based on patterning pyramid-like sub-wavelength structures (SWS) using ablation with a 15 W femto-second laser operating at 1030 nm. One side of each of two discs was fabricated with SWS that had a pitch of 0.54 mm and height of 2 mm. The average ablation volume removal rate was 1.6 mm$^{3}$/min. Measurements of the two-disc sandwich show transmission higher than 97% between 43 and 161 GHz. We characterize instrumental polarization (IP) arising from differential transmission due to asymmetric SWS. We find that with proper alignment of the two disc sandwich RMS IP across the band is predicted to be 0.07% at normal incidence, and less than 0.6% at incidence angles up to 20 degrees. These results indicate that laser ablation of SWS on sapphire and on other hard materials such as alumina is an effective way to fabricate broad-band ARC. △ Less

Submitted 16 December, 2020; v1 submitted 30 July, 2020; originally announced July 2020.

Journal ref: Journal of Applied Physics, 128(22), 225302 (2020)

New diversity form of ice polymorphism: Discovery of second hydrogen ordered phase of ice VI

Authors: Ryo Yamane, Kazuki Komatsu, Jun Gouchi, Yoshiya Uwatoko, Shinichi Machida, Takanori Hattori, Hayate Ito, Hiroyuki Kagi

Abstract: More than 20 crystalline and amorphous phases have been reported for ice so far. This extraordinary polymorphism of ice arises from the geometric flexibility of hydrogen bonds and hydrogen ordering, and makes ice a unique presence with its universality in the wide fields of material and earth and planetary science. A prominent unsolved question concerning the diversity is whether a hydrogen-disord… ▽ More More than 20 crystalline and amorphous phases have been reported for ice so far. This extraordinary polymorphism of ice arises from the geometric flexibility of hydrogen bonds and hydrogen ordering, and makes ice a unique presence with its universality in the wide fields of material and earth and planetary science. A prominent unsolved question concerning the diversity is whether a hydrogen-disordered phase of ice transforms into only one hydrogen-ordered phase, as inferred from the current phase diagram of ice, although its possible hydrogen configurations have close energies. Recent experiments on a high-pressure hydrogen-disordered phase, ice VI, revealed an unknown hydrogen-ordered form ($β$-XV) besides the known ordered phase, ice XV, which would be a counterexample of the question. However, due to lack of experimental evidence, it has not been clarified whether $β$-XV is a distinct crystalline phase. Herein we report a second hydrogen-ordered phase for ice VI, ice XIX, unambiguously demonstrated by neutron diffraction measurements. The phase boundary between ice VI and ice XIX shows that ice VI contracts upon the hydrogen ordering, which thermodynamically stabilizes ice XIX in higher-pressure region than ice XV because of its smaller volume than ice XV. The pressure-driven phase competition between hydrogen-ordered phases, also theoretically suggested in other ice polymorphs, can induce hydrogen ordering of ice in different manners. Thus, this study demonstrates a hitherto undiscovered polymorphism of ice. △ Less

Submitted 18 June, 2020; originally announced June 2020.

Origin of magnetovolume effect in a cobaltite

Authors: Ping Miao, Zhijian Tan, Sanghyun Lee, Yoshihisa Ishikawa, Shuki Torii, Masao Yonemura, Akihiro Koda, Kazuki Komatsu, Shinichi Machida, Asami Sano-Furukawa, Takanori Hattori, Xiaohuan Lin, Kuo Li, Takashi Mochiku, Ryosuke Kikuchi, Chizuru Kawashima, Hiroki Takahashi, Qingzhen Huang, Shinichi Itoh, Ryosuke Kadono, Yingxia Wang, Feng Pan, Kunihiko Yamauchi, Takashi Kamiyama

Abstract: The layered perovskite PrBaCo2O5.5+x demonstrates a strong negative thermal expansion (NTE) which holds potential for being fabricated into composites with zero thermal expansion. The NTE was found to be intimately associated with the spontaneous magnetic ordering, known as magnetovolume effect (MVE). Here we report with compelling evidences that the continuous-like MVE in PrBaCo2O5.5+x is intrins… ▽ More The layered perovskite PrBaCo2O5.5+x demonstrates a strong negative thermal expansion (NTE) which holds potential for being fabricated into composites with zero thermal expansion. The NTE was found to be intimately associated with the spontaneous magnetic ordering, known as magnetovolume effect (MVE). Here we report with compelling evidences that the continuous-like MVE in PrBaCo2O5.5+x is intrinsically of discontinuous character, originating from an magnetoelectric transition from an antiferromagnetic insulating large-volume (AFILV) phase to a ferromagnetic metallic small-volume (FMSV) phase. Furthermore, the magnetoelectric effect (ME) shows high sensitivity to multiple external stimuli such as temperature, carrier doping, hydrostatic pressure, magnetic field etc. In contrast to the well-known ME such as colossal magnetoresistance and multiferroic effect which involve symmetry breaking of crystal structure, the ME in the cobaltite is purely isostructural. Our discovery provides a new pathway to realizing the ME as well as the NTE, which may find applications in new techniques. △ Less

Submitted 22 June, 2020; v1 submitted 17 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. B 103, 094302 (2021)

Charge-carrier mobility in hydrogen-terminated diamond field-effect transistors

Authors: Yosuke Sasama, Taisuke Kageura, Katsuyoshi Komatsu, Satoshi Moriyama, Jun-ichi Inoue, Masataka Imura, Kenji Watanabe, Takashi Taniguchi, Takashi Uchihashi, Yamaguchi Takahide

Abstract: Diamond field-effect transistors (FETs) have potential applications in power electronics and high-output high-frequency amplifications. In such applications, high charge-carrier mobility is desirable for a reduced loss and high-speed operation. We have recently fabricated diamond FETs with a hexagonal-boron-nitride gate dielectric and observed a high mobility above 300 cm$^{2}$V$^{-1}$s$^{-1}$. In… ▽ More Diamond field-effect transistors (FETs) have potential applications in power electronics and high-output high-frequency amplifications. In such applications, high charge-carrier mobility is desirable for a reduced loss and high-speed operation. We have recently fabricated diamond FETs with a hexagonal-boron-nitride gate dielectric and observed a high mobility above 300 cm$^{2}$V$^{-1}$s$^{-1}$. In this study, we examine which scattering mechanism limits the mobility of our FETs through theoretical calculations. Our calculations reveal that the dominant carrier scattering is caused by surface charged impurities with the density of $\approx$1$\times10^{12}$ cm$^{-2}$, and suggest a possible increase in mobility over 1000 cm$^{2}$V$^{-1}$s$^{-1}$ by reducing the impurities. △ Less

Submitted 17 May, 2020; v1 submitted 31 January, 2020; originally announced January 2020.

Comments: 17 pages, 6 figures

Journal ref: Journal of Applied Physics 127, 185707 (2020)

Updated design of the CMB polarization experiment satellite LiteBIRD

Authors: H. Sugai, P. A. R. Ade, Y. Akiba, D. Alonso, K. Arnold, J. Aumont, J. Austermann, C. Baccigalupi, A. J. Banday, R. Banerji, R. B. Barreiro, S. Basak, J. Beall, S. Beckman, M. Bersanelli, J. Borrill, F. Boulanger, M. L. Brown, M. Bucher, A. Buzzelli, E. Calabrese, F. J. Casas, A. Challinor, V. Chan, Y. Chinone , et al. (196 additional authors not shown)

Abstract: Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will ac… ▽ More Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2. △ Less

Submitted 6 January, 2020; originally announced January 2020.

Comments: Journal of Low Temperature Physics, in press

Journal ref: Journal of Low Temperature Physics 199, 1107 (2020)

Ice Ic without stacking disorder by evacuating hydrogen from hydrogen hydrate

Authors: Kazuki Komatsu, Shinichi Machida, Fumiya Noritake, Takanori Hattori, Asami Sano-Furukawa, Ryo Yamane, Keishiro Yamashita, Hiroyuki Kagi

Abstract: Water freezes below 0 °C at ambient pressure, ordinarily to ice Ih with an ABAB... hexagonal stacking sequence. However, it is also known to produce "ice Ic" nominally with an ABCABC... cubic stacking sequence under certain conditions1, and its existence in Earth's atmosphere, or in comets is debated. "Ice Ic", or called as cubic ice, was first identified in 1943 by König, who used electron micros… ▽ More Water freezes below 0 °C at ambient pressure, ordinarily to ice Ih with an ABAB... hexagonal stacking sequence. However, it is also known to produce "ice Ic" nominally with an ABCABC... cubic stacking sequence under certain conditions1, and its existence in Earth's atmosphere, or in comets is debated. "Ice Ic", or called as cubic ice, was first identified in 1943 by König, who used electron microscopy to study the condensation of ice from water vapor to a cold substrate. Subsequently, many different routes to "ice Ic" have been established, such as the dissociation of gas hydrates, warming amorphous ices or annealing high-pressure ices recovered at ambient pressure, freezing of $μ$- or nano-confined water. Despite the numerous studies on "ice Ic", its structure has not been fully verified, because the diffraction patterns of "ice Ic" show signatures of stacking-disorder, and ideal ice Ic without stacking-disorder had not been formed until very recently. Here we demonstrate a route to obtain ice Ic without stacking-disorder by degassing hydrogen from the high-pressure form of hydrogen hydrate, C$_2$, which has a host framework that is isostructural with ice Ic. Surprisingly, the stacking-disorder free ice Ic is formed from C$_2$ via an intermediate amorphous or nano-crystalline form under decompression, unlike the direct transformations that occur in the cases of recently discovered ice XVI from neon hydrate, or ice XVII from hydrogen hydrate. The obtained ice Ic shows remarkable thermal stability until the phase transition to ice Ih at 250 K; this thermal stability originates from the lack of dislocations, which promote changes in the stacking sequence. This discovery of ideal ice Ic will promote understanding of the role of stacking-disorder on the physical properties of ice as a counter end-member of ice Ih. △ Less

Submitted 8 September, 2019; originally announced September 2019.

Quantum oscillations in diamond field effect transistors with a h-BN gate dielectric

Authors: Yosuke Sasama, Katsuyoshi Komatsu, Satoshi Moriyama, Masataka Imura, Shiori Sugiura, Taichi Terashima, Shinya Uji, Kenji Watanabe, Takashi Taniguchi, Takashi Uchihashi, Yamaguchi Takahide

Abstract: Diamond has attracted attention as a next-generation semiconductor because of its various exceptional properties such as a wide bandgap and high breakdown electric field. Diamond field effect transistors, for example, have been extensively investigated for high-power and high-frequency electronic applications. The quality of their charge transport (i.e., mobility), however, has been limited due to… ▽ More Diamond has attracted attention as a next-generation semiconductor because of its various exceptional properties such as a wide bandgap and high breakdown electric field. Diamond field effect transistors, for example, have been extensively investigated for high-power and high-frequency electronic applications. The quality of their charge transport (i.e., mobility), however, has been limited due to charged impurities near the diamond surface. Here, we fabricate diamond field effect transistors by using a monocrystalline hexagonal boron nitride as a gate dielectric. The resulting high mobility of charge carriers allows us to observe quantum oscillations in both the longitudinal and Hall resistivities. The oscillations provide important information on the fundamental properties of the charge carriers, such as effective mass, lifetime, and dimensionality. Our results indicate the presence of a high-quality two-dimensional hole gas at the diamond surface and thus pave the way for studies of quantum transport in diamond and the development of low-loss and high-speed devices. △ Less

Submitted 2 December, 2019; v1 submitted 31 July, 2019; originally announced July 2019.

Journal ref: Phys. Rev. Materials 3, 121601 (2019)

Demonstration of the broadband half-wave plate using the nine-layer sapphire for the CMB polarization experiment

Authors: Kunimoto Komatsu, Tomotake Matsumura, Hiroaki Imada, Hirokazu Ishino, Nobuhiko Katayama, Yuki Sakurai

Abstract: We report the development of the achromatic half-wave plate (AHWP) at millimeter wave for cosmic microwave background polarization experiments. We fabricate an AHWP consisting of nine a-cut sapphire plates based on the Pancharatnam recipe to cover a wide frequency range. The modulation efficiency and the phase are measured in a frequency range of 33 to 260 GHz with incident angles up to 10 degrees… ▽ More We report the development of the achromatic half-wave plate (AHWP) at millimeter wave for cosmic microwave background polarization experiments. We fabricate an AHWP consisting of nine a-cut sapphire plates based on the Pancharatnam recipe to cover a wide frequency range. The modulation efficiency and the phase are measured in a frequency range of 33 to 260 GHz with incident angles up to 10 degrees. We find the measurements at room temperature are in good agreement with the predictions. This is the broadest demonstration of the AHWP at the millimeter wave. △ Less

Submitted 22 January, 2020; v1 submitted 31 May, 2019; originally announced May 2019.

Comments: 24 pages, 16 figures

Journal ref: J. Astron. Telesc. Instrum. Syst. 5(4), 044008 (2019)

Topological Valley Currents in Bilayer Graphene/Hexagonal Boron Nitride Superlattices

Authors: Kosuke Endo, Katsuyoshi Komatsu, Takuya Iwasaki, Eiichiro Watanabe, Daiju Tsuya, Kenji Watanabe, Takashi Taniguchi, Yutaka Noguchi, Yutaka Wakayama, Yoshifumi Morita, Satoshi Moriyama

Abstract: Graphene superlattices have recently been attracting growing interest as an emergent class of quantum metamaterials. In this paper, we report the observation of nonlocal transport in bilayer graphene (BLG) superlattices encapsulated between two hexagonal boron nitride (hBN) layers, which formed hBN/BLG/hBN moiré superlattices. We then employed these superlattices to detect a long-range charge-neut… ▽ More Graphene superlattices have recently been attracting growing interest as an emergent class of quantum metamaterials. In this paper, we report the observation of nonlocal transport in bilayer graphene (BLG) superlattices encapsulated between two hexagonal boron nitride (hBN) layers, which formed hBN/BLG/hBN moiré superlattices. We then employed these superlattices to detect a long-range charge-neutral valley current using an all-electrical method. The moiré superlattice with broken inversion symmetry leads to a hot spot with Berry curvature accumulating at the charge neutral point (CNP), and it harbors satellites of the CNP. We observed nonlocal resistance on the order of 1 $\text{k}Ω$, which obeys a scaling relation. This nonlocal resistance evolves from the quantum Hall effect but without magnetic field/time-reversal symmetry breaking, which is associated with a hot-spot-induced topological valley current. This study should pave the way to developing a Berry-phase-sensitive probe to detect hot spots in gapped Dirac materials with inversion-symmetry breaking. △ Less

Submitted 23 June, 2019; v1 submitted 2 March, 2019; originally announced March 2019.

Comments: 9 pages, 3 figures

Journal ref: Applied Physics Letters 114, 243105 (2019)

Observation of superconductivity in bilayer graphene/hexagonal boron nitride superlattices

Authors: Satoshi Moriyama, Yoshifumi Morita, Katsuyoshi Komatsu, Kosuke Endo, Takuya Iwasaki, Shu Nakaharai, Yutaka Noguchi, Yutaka Wakayama, Eiichiro Watanabe, Daiju Tsuya, Kenji Watanabe, Takashi Taniguchi

Abstract: A class of low-dimensional superconductivity (SC), such as most of "atomic-layer" SCs, has survived only under certain circumstances, implying a role of the substrate. Moreover, in some recent SC discoveries at heterogeneous interfaces, SC was buried in bulk solids and ex situ. Genuine atomic-layer SC is difficult to access. Here we report a novel route to atomic-layer SC in graphene superlattices… ▽ More A class of low-dimensional superconductivity (SC), such as most of "atomic-layer" SCs, has survived only under certain circumstances, implying a role of the substrate. Moreover, in some recent SC discoveries at heterogeneous interfaces, SC was buried in bulk solids and ex situ. Genuine atomic-layer SC is difficult to access. Here we report a novel route to atomic-layer SC in graphene superlattices. Our device comprises stacked non-twisted bilayer graphene (BLG) and hexagonal boron nitride (hBN), i.e., hBN/BLG/hBN Moiré superlattices. Upon in situ electrostatic doping, we observe an SC dome with a critical temperature up to $T_{\rm{BKT}} = 14 \rm{K}$, corresponding to the confinement of vortices. We believe that SC via doping Dirac materials is ubiquitous in condensed matter and that this study paves a way toward the design of a new SC family. △ Less

Submitted 2 September, 2019; v1 submitted 27 January, 2019; originally announced January 2019.

Comments: 28 pages, 12 figures

Fabry-Pérot resonances and a crossover to the quantum Hall regime in ballistic graphene quantum point contacts

Authors: Nurul Fariha Ahmad, Katsuyoshi Komatsu, Takuya Iwasaki, Kenji Watanabe, Takashi Taniguchi, Hiroshi Mizuta, Yutaka Wakayama, Abdul Manaf Hashim, Yoshifumi Morita, Satoshi Moriyama, Shu Nakaharai

Abstract: We report on the observation of quantum transport and interference in a graphene device that is attached with a pair of split gates to form an electrostatically-defined quantum point contact (QPC). In the low magnetic field regime, the resistance exhibited Fabry-Pérot (FP) resonances due to np'n (pn'p) cavities formed by the top gate. In the quantum Hall (QH) regime with a high magnetic field, the… ▽ More We report on the observation of quantum transport and interference in a graphene device that is attached with a pair of split gates to form an electrostatically-defined quantum point contact (QPC). In the low magnetic field regime, the resistance exhibited Fabry-Pérot (FP) resonances due to np'n (pn'p) cavities formed by the top gate. In the quantum Hall (QH) regime with a high magnetic field, the edge states governed the phenomena, presenting a unique condition where the edge channels of electrons and holes along a p-n junction acted as a solid-state analogue of a monochromatic light beam. We observed a crossover from the FP to QH regimes in ballistic graphene QPC under a magnetic field with varying temperatures. In particular, the collapse of the QH effect was elucidated as the magnetic field was decreased. Our high-mobility graphene device enabled observation of such quantum coherence effects up to several tens of kelvins. The presented device could serve as one of the key elements in future electronic quantum optic devices. △ Less

Submitted 18 January, 2019; originally announced January 2019.

Comments: 16 pages, 6 figures

Journal ref: Scientific Reports 9, 3031 (2019)

Near- and Mid-IR Gas-Phase Absorption Spectra of H2@C60+-He

Authors: Dmitry V. Strelnikov, Juraj Jašík, Dieter Gerlich, Michihisa Murata, Yasujiro Murata, Koichi Komatsu, Jana Roithová

Abstract: Near- and mid-IR absorption spectra of endohedral H2@C60+ have been measured using He-tagging. The samples have been prepared using a 'molecular surgery' synthetic approach and were ionized and spectroscopically characterized in the gas phase. In contrast to neutral C60 and H2@C60, the corresponding He-tagged cationic species show distinct spectral differences. Shifts and line splittings in the ne… ▽ More Near- and mid-IR absorption spectra of endohedral H2@C60+ have been measured using He-tagging. The samples have been prepared using a 'molecular surgery' synthetic approach and were ionized and spectroscopically characterized in the gas phase. In contrast to neutral C60 and H2@C60, the corresponding He-tagged cationic species show distinct spectral differences. Shifts and line splittings in the near- and mid-IR regions indicate the influence of the caged hydrogen molecule on both the electronic ground and excited states. Possible relevance to astronomy is discussed. △ Less

Submitted 31 July, 2018; originally announced July 2018.

Observation of the quantum valley Hall state in ballistic graphene superlattices

Authors: K. Komatsu, Y. Morita, E. Watanabe, D. Tsuya, K. Watanabe, T. Taniguchi, S. Moriyama

Abstract: In graphene superlattices, bulk topological currents can lead to long-range charge-neutral flow and non-local resistance near Dirac points. A ballistic version of these phenomena has never been explored. Here, we report transport properties of ballistic graphene superlattices. This allows us to study and exploit giant non-local resistances with a large valley Hall angle without a magnetic field. I… ▽ More In graphene superlattices, bulk topological currents can lead to long-range charge-neutral flow and non-local resistance near Dirac points. A ballistic version of these phenomena has never been explored. Here, we report transport properties of ballistic graphene superlattices. This allows us to study and exploit giant non-local resistances with a large valley Hall angle without a magnetic field. In the low-temperature regime, a crossover occurs toward a new state of matter, referred to as a quantum valley Hall state (qVHS), which is an analog of the quantum Hall state without a magnetic field. Furthermore, a non-local resistance plateau, implying rigidity of the qVHS, emerges as a function of magnetic field, and the collapse of this plateau is observed, which is considered as a manifestation of valley/pseudospin magnetism. △ Less

Submitted 29 May, 2018; originally announced May 2018.

Comments: 23 pages, 9 figures

Journal ref: Science Advances, Vol.4, No. 5, eaaq0194 (2018)

The LiteBIRD Satellite Mission - Sub-Kelvin Instrument

Authors: A. Suzuki, P. A. R. Ade, Y. Akiba, D. Alonso, K. Arnold, J. Aumont, C. Baccigalupi, D. Barron, S. Basak, S. Beckman, J. Borrill, F. Boulanger, M. Bucher, E. Calabrese, Y. Chinone, H-M. Cho, A. Cukierman, D. W. Curtis, T. de Haan, M. Dobbs, A. Dominjon, T. Dotani, L. Duband, A. Ducout, J. Dunkley , et al. (127 additional authors not shown)

Abstract: Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through B-mode (d… ▽ More Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through B-mode (divergent-free) polarization pattern embedded in the Cosmic Microwave Background anisotropies. If detected, these signals would provide strong evidence for inflation, point to the correct model for inflation, and open a window to physics at ultra-high energies. LiteBIRD is a satellite mission with a goal of detecting degree-and-larger-angular-scale B-mode polarization. LiteBIRD will observe at the second Lagrange point with a 400 mm diameter telescope and 2,622 detectors. It will survey the entire sky with 15 frequency bands from 40 to 400 GHz to measure and subtract foregrounds. The U.S. LiteBIRD team is proposing to deliver sub-Kelvin instruments that include detectors and readout electronics. A lenslet-coupled sinuous antenna array will cover low-frequency bands (40 GHz to 235 GHz) with four frequency arrangements of trichroic pixels. An orthomode-transducer-coupled corrugated horn array will cover high-frequency bands (280 GHz to 402 GHz) with three types of single frequency detectors. The detectors will be made with Transition Edge Sensor (TES) bolometers cooled to a 100 milli-Kelvin base temperature by an adiabatic demagnetization refrigerator.The TES bolometers will be read out using digital frequency multiplexing with Superconducting QUantum Interference Device (SQUID) amplifiers. Up to 78 bolometers will be multiplexed with a single SQUID amplidier. We report on the sub-Kelvin instrument design and ongoing developments for the LiteBIRD mission. △ Less

Submitted 15 March, 2018; v1 submitted 22 January, 2018; originally announced January 2018.

Comments: 7 pages 2 figures Journal of Low Temperature Physics - Special edition - LTD17 Proceeding

Thickness Scaling Effect on Interfacial Barrier and Electrical Contact to Two-Dimensional MoS2 Layers

Authors: Song-Lin Li, K. Komatsu, Shu Nakaharai, Yen-Fu Lin, M. Yamamoto, X. F. Duan, K. Tsukagoshi

Abstract: Understanding the interfacial electrical properties between metallic electrodes and low dimensional semiconductors is essential for both fundamental science and practical applications. Here we report the observation of thickness reduction induced crossover of electrical contact at Au/MoS2 interfaces. For MoS2 thicker than 5 layers, the contact resistivity slightly decreases with reducing MoS2 thic… ▽ More Understanding the interfacial electrical properties between metallic electrodes and low dimensional semiconductors is essential for both fundamental science and practical applications. Here we report the observation of thickness reduction induced crossover of electrical contact at Au/MoS2 interfaces. For MoS2 thicker than 5 layers, the contact resistivity slightly decreases with reducing MoS2 thickness. By contrast, the contact resistivity sharply increases with reducing MoS2 thickness below 5 layers, mainly governed by the quantum confinement effect. It is found that the interfacial potential barrier can be finely tailored from 0.3 to 0.6 eV by merely varying MoS2 thickness. A full evolution diagram of energy level alignment is also drawn to elucidate the thickness scaling effect. The finding of tailoring interfacial properties with channel thickness represents a useful approach controlling the metal/semiconductor interfaces which may result in conceptually innovative functionalities. △ Less

Submitted 15 February, 2015; v1 submitted 7 October, 2014; originally announced October 2014.

Comments: First to observe the quantum confinement effect on interfacial barrier in 2D materials

Journal ref: ACS Nano, 8 (2014) 12836-12842

Strain superlattices and macroscale suspension of Graphene induced by corrugated substrates

Authors: Antoine Reserbat-Plantey, Dipankar Kalita, Laurence Ferlazzo, Sandrine Autier-Laurent, Katsuyoshi Komatsu, Chuan Li, Raphaël Weil, Zheng Han, Sandrine Autier-Laurent, Arnaud Ralko, Laetitia Marty, Sophie Guéron, Nedjma Bendiab, Hélène Bouchiat, Vincent Bouchiat

Abstract: We investigate the organized formation of strain, ripples and suspended features in macroscopic CVD-prepared graphene sheets transferred onto a corrugated substrate made of an ordered arrays of silica pillars of variable geometries. Depending on the aspect ratio and sharpness of the corrugated array, graphene can conformally coat the surface, partially collapse, or lay, fakir-like, fully suspended… ▽ More We investigate the organized formation of strain, ripples and suspended features in macroscopic CVD-prepared graphene sheets transferred onto a corrugated substrate made of an ordered arrays of silica pillars of variable geometries. Depending on the aspect ratio and sharpness of the corrugated array, graphene can conformally coat the surface, partially collapse, or lay, fakir-like, fully suspended between pillars over tens of micrometers. Upon increase of pillar density, ripples in collapsed films display a transition from random oriented pleats emerging from pillars to ripples linking nearest neighboring pillars organized in domains of given orientation. Spatially-resolved Raman spectroscopy, atomic force microscopy and electronic microscopy reveal uniaxial strain domains in the transferred graphene, which are induced and controlled by the geometry. We propose a simple theoretical model to explain the transition between suspended and collapsed graphene. For the arrays with high aspect ratio pillars, graphene membranes stays suspended over macroscopic distances with minimal interaction with pillars tip apex. It offers a platform to tailor stress in graphene layers and open perspectives for electron transport and nanomechanical applications. △ Less

Submitted 24 April, 2014; v1 submitted 23 April, 2014; originally announced April 2014.

Thickness-Dependent Interfacial Coulomb Scattering in Atomically Thin Field-Effect Transistors

Authors: Song-Lin Li, Katsunori Wakabayashi, Yong Xu, Shu Nakaharai, Katsuyoshi Komatsu, Wen-Wu Li, Yen-Fu Lin, Alex Aparecido-Ferreira, Kazuhito Tsukagoshi

Abstract: Two-dimensional semiconductors are structurally ideal channel materials for the ultimate atomic electronics after silicon era. A long-standing puzzle is the low carrier mobility (μ) in them as compared with corresponding bulk structures, which constitutes the main hurdle for realizing high-performance devices. To address this issue, we perform combined experimental and theoretical study on atomica… ▽ More Two-dimensional semiconductors are structurally ideal channel materials for the ultimate atomic electronics after silicon era. A long-standing puzzle is the low carrier mobility (μ) in them as compared with corresponding bulk structures, which constitutes the main hurdle for realizing high-performance devices. To address this issue, we perform combined experimental and theoretical study on atomically thin MoS2 field effect transistors with varying the number of MoS2 layers (NLs). Experimentally, an intimate relation is observed with a 10-fold degradation in μ for extremely thinned monolayer channels. To accurately describe the carrier scattering process and shed light on the origin of the thinning-induced mobility degradation, a generalized Coulomb scattering model is developed with strictly considering device configurative conditions, i.e., asymmetric dielectric environments and lopsided carrier distribution. We reveal that the carrier scattering from interfacial Coulomb impurities (e.g., chemical residues, gaseous adsorbates and surface dangling bonds) is greatly intensified in extremely thinned channels, resulting from shortened interaction distance between impurities and carriers. Such a pronounced factor may surpass lattice phonons and serve as dominant scatterers. This understanding offers new insight into the thickness induced scattering intensity, highlights the critical role of surface quality in electrical transport and would lead to rational performance improvement strategies for future atomic electronics. △ Less

Submitted 18 August, 2013; originally announced August 2013.

Comments: With Supporting Information

Journal ref: Nano Letters, 13 (2013) 3546-3552

Signature of gate-tunable magnetism in graphene grafted with Pt-porphyrins

Authors: Chuan Li, Katsuyoshi Komatsu, G. Clave, S. Campidelli, A. Filoramo, S. Gueron, H. Bouchiat

Abstract: Inducing magnetism in graphene holds great promises, such as controlling the exchange interaction with a gate electrode and generating exotic magnetic phases. Coating graphene with magnetic molecules or atoms has so far mostly lead to decreased graphene mobility. In the present work, we show that Pt-porphyrins adsorbed on graphene lead to an enhanced mobility and to gate-dependent magnetism. We re… ▽ More Inducing magnetism in graphene holds great promises, such as controlling the exchange interaction with a gate electrode and generating exotic magnetic phases. Coating graphene with magnetic molecules or atoms has so far mostly lead to decreased graphene mobility. In the present work, we show that Pt-porphyrins adsorbed on graphene lead to an enhanced mobility and to gate-dependent magnetism. We report that porphyrins can be donor or acceptor, depending on graphene s initial doping. The porphyrins transfer charge and ionize around the charged impurities on graphene, decreasing the graphene doping and increasing its mobility. In addition, ionized porphyrins carry a magnetic moment. Using the sensitivity of mesoscopic transport to magnetism, in particular the superconducting proximity effect and conductance fluctuations, we explore the magnetic order induced in graphene by the interacting magnetic moments of the ionized porphyrins. Among the signatures of magnetism, we find two-terminal-magnetoresistance fluctuations with an odd component, a tell-tale sign of time reversal symmetry breaking at zero field, that does not exist in uncoated graphene sample. When graphene is connected to superconducting electrodes, the induced magnetism leads to a gate-voltage-dependent suppression of the supercurrent, modified magnetic interference patterns, and gate-voltage-dependent magnetic hysteresis. The magnetic signatures are greatest for long superconductor graphene superconductor junctions and for samples with the highest initial doping, compatible with a greater number of ionized and thus magnetic porphyrins. Our findings suggest that long-range magnetism is induced through graphene by the ionized porphyrins magnetic moment. This magnetic interaction is controlled by the density of carriers in graphene, a tunability that could be exploited in spintronic applications. △ Less

Submitted 15 January, 2016; v1 submitted 26 April, 2013; originally announced April 2013.

Journal ref: Phys. Rev. B 93, 045403 (2016)

Infrared spectroscopy of small-molecule endofullerenes

Authors: T. Rõõm, L. Peedu, Min Ge, D. Hüvonen, U. Nagel, Shufeng Ye, Minzhong Xu, Z. Bačić, S. Mamone, M. H. Levitt, M. Carravetta, J. Y. -C. Chen, Xuegong Lei, N. J. Turro, Y. Murata, K. Komatsu

Abstract: Hydrogen is one of the few molecules which has been incarcerated in the molecular cage of C$_{60}$ and forms endohedral supramolecular complex H$_2$@C$_{60}$. In this confinement hydrogen acquires new properties. Its translational motion becomes quantized and is correlated with its rotations. We applied infrared spectroscopy to study the dynamics of hydrogen isotopologs H$_2$, D$_2$ and HD incarce… ▽ More Hydrogen is one of the few molecules which has been incarcerated in the molecular cage of C$_{60}$ and forms endohedral supramolecular complex H$_2$@C$_{60}$. In this confinement hydrogen acquires new properties. Its translational motion becomes quantized and is correlated with its rotations. We applied infrared spectroscopy to study the dynamics of hydrogen isotopologs H$_2$, D$_2$ and HD incarcerated in C$_{60}$. The translational and rotational modes appear as side bands to the hydrogen vibrational mode in the mid infrared part of the absorption spectrum. Because of the large mass difference of hydrogen and C$_{60}$ and the high symmetry of C$_{60}$ the problem is identical to a problem of a vibrating rotor moving in a three-dimensional spherical potential. The translational motion within the C$_{60}$ cavity breaks the inversion symmetry and induces optical activity of H$_2$. We derive potential, rotational, vibrational and dipole moment parameters from the analysis of the infrared absorption spectra. Our results were used to derive the parameters of a pairwise additive five-dimensional potential energy surface for H$_2$@C$_{60}$. The same parameters were used to predict H$_2$ energies inside C$_{70}$[Xu et al., J. Chem. Phys., {\bf 130}, 224306 (2009)]. We compare the predicted energies and the low temperature infrared absorption spectra of H$_2$@C$_{70}$. △ Less

Submitted 26 March, 2013; v1 submitted 11 March, 2013; originally announced March 2013.

Comments: Updated author list

Superconducting proximity effect through graphene from zero field to the Quantum Hall regime

Authors: Katsuyoshi Komatsu, Chuan Li, S. Autier-Laurent, H. Bouchiat, S. Gueron

Abstract: We investigate the superconducting proximity effect through graphene in the long diffusive junction limit, at low and high magnetic field. The interface quality and sample phase coherence lead to a zero resistance state at low temperature, zero magnetic field, and high doping. We find a striking suppression of the critical current near graphene\rq{}s charge neutrality point, which we attribute to… ▽ More We investigate the superconducting proximity effect through graphene in the long diffusive junction limit, at low and high magnetic field. The interface quality and sample phase coherence lead to a zero resistance state at low temperature, zero magnetic field, and high doping. We find a striking suppression of the critical current near graphene\rq{}s charge neutrality point, which we attribute to specular reflexion of Andreev pairs at the interface of charge puddles. This type of reflexion, specific to the Dirac band structure, had up to now remained elusive. At high magnetic field the use of superconducting electrodes with high critical field enables the investigation of the proximity effect in the Quantum Hall regime. Although the supercurrent is not directly detectable in our two wire configuration, interference effects are visible which may be attributed to the injection of Cooper pairs into edge states. △ Less

Submitted 8 February, 2012; originally announced February 2012.

Comments: 10 pages, 17 figures. Submitted to PRB

Journal ref: Phys. Rev. B 86, 115412 (Published 7 September 2012 )

The SPICA coronagraphic instrument (SCI) for the study of exoplanets

Authors: K. Enya, T. Kotani, K. Haze, K. Aono, T. Nakagawa, H. Matsuhara, H. Kataza, T. Wada, M. Kawada, K. Fujiwara, M. Mita, S. Takeuchi, K. Komatsu, S. Sakai, H. Uchida, S. Mitani, T. Yamawaki, T. Miyata, S. Sako, T. Nakamura, K. Asano, T. Yamashita, N. Narita, T. Matsuo, M. Tamura , et al. (17 additional authors not shown)

Abstract: We present the SPICA Coronagraphic Instrument (SCI), which has been designed for a concentrated study of extra-solar planets (exoplanets). SPICA mission provides us with a unique opportunity to make high contrast observations because of its large telescope aperture, the simple pupil shape, and the capability for making infrared observations from space. The primary objectives for the SCI are the di… ▽ More We present the SPICA Coronagraphic Instrument (SCI), which has been designed for a concentrated study of extra-solar planets (exoplanets). SPICA mission provides us with a unique opportunity to make high contrast observations because of its large telescope aperture, the simple pupil shape, and the capability for making infrared observations from space. The primary objectives for the SCI are the direct coronagraphic detection and spectroscopy of Jovian exoplanets in infrared, while the monitoring of transiting planets is another important target. The specification and an overview of the design of the instrument are shown. In the SCI, coronagraphic and non-coronagraphic modes are applicable for both an imaging and a spectroscopy. The core wavelength range and the goal contrast of the coronagraphic mode are 3.5--27$μ$m, and 10$^{-6}$, respectively. Two complemental designs of binary shaped pupil mask coronagraph are presented. The SCI has capability of simultaneous observations of one target using two channels, a short channel with an InSb detector and a long wavelength channel with a Si:As detector. We also give a report on the current progress in the development of key technologies for the SCI. △ Less

Submitted 16 August, 2011; originally announced August 2011.

Comments: 22 pages, 10 figures

Journal ref: AdSR, 48, 323 (2011)

Experimental Evidence of Fluctuation-Dissipation Theorem Violation in a Superspin Glass

Authors: Katsuyoshi Komatsu, D. L'Hote, Sawako Nakamae, Vincent Mosser, Marcin Konczykowski, Emmanuelle Dubois, V. Dupuis, Régine Perzynski

Abstract: We present the experimental observation of the fluctuation-dissipation theorem (FDT) violation in an assembly of interacting magnetic nanoparticles in the low temperature superspin glass phase. The magnetic noise is measured with a two-dimension electron gas Hall probe and compared to the out of phase ac susceptibility of the same ferrofluid. For "intermediate" aging times of the order of 1 h, the… ▽ More We present the experimental observation of the fluctuation-dissipation theorem (FDT) violation in an assembly of interacting magnetic nanoparticles in the low temperature superspin glass phase. The magnetic noise is measured with a two-dimension electron gas Hall probe and compared to the out of phase ac susceptibility of the same ferrofluid. For "intermediate" aging times of the order of 1 h, the ratio of the effective temperature $T_{\rm eff}$ to the bath temperature T grows from 1 to 6.5 when T is lowered from $T_g$ to 0.3 $T_g$, regardless of the noise frequency. These values are comparable to those measured in an atomic spin glass as well as those calculated for a Heisenberg spin glass. △ Less

Submitted 7 January, 2011; v1 submitted 19 October, 2010; originally announced October 2010.

Anisotropy-axis orientation effect on the magnetization of γ-Fe2O3 frozen ferrofluid

Authors: Sawako Nakamae, Caroline Thibierge, Katsuyoshi Komatsu, Denis L'Hôte, E. Vincent, Emmanuel Dubois, V. Dupuis, Régine Perzynski

Abstract: The effect of magnetic anisotropy-axis alignment on the superparamagnetic (SPM) and superspin glass (SSG) states in a frozen ferrofluid has been investigated. The ferrofluid studied here consists of maghemite nanoparticles (γ-Fe2O3, mean diameter = 8.6 nm) dispersed in glycerine at a volume fraction of ~15%. In the high temperature SPM state, the magnetization of aligned ferrofluid increased by a… ▽ More The effect of magnetic anisotropy-axis alignment on the superparamagnetic (SPM) and superspin glass (SSG) states in a frozen ferrofluid has been investigated. The ferrofluid studied here consists of maghemite nanoparticles (γ-Fe2O3, mean diameter = 8.6 nm) dispersed in glycerine at a volume fraction of ~15%. In the high temperature SPM state, the magnetization of aligned ferrofluid increased by a factor varying between 2 and 4 with respect to that in the randomly oriented state. The negative interaction energy obtained from the Curie-Weiss fit to the high temperature susceptibility in the SPM states as well as the SSG phase onset temperature determined from the linear magnetization curves were found to be rather insensitive to the anisotropy axis alignment. The low temperature aging behaviour, explored via "zero-field cooled magnetization" (ZFCM) relaxation measurements, however, show distinct difference in the aging dynamics in the anisotropy-axis aligned and randomly oriented SSG states. △ Less

Submitted 14 September, 2010; originally announced September 2010.

Comments: to appear in Journal of Physics D: Applied Physics

Noise Measurement of Interacting Ferromagnetic Particles with High Resolution Hall Microprobes

Authors: K. Komatsu, D. L'Hote, S. Nakamae, F. Ladieu, V. Mosser, A. Kerlain, M. Konczykowski, E. Dubois, V. Dupuis, R. Perzynski

Abstract: We present our first experimental determination of the magnetic noise of a superspinglass made of < 1 pico-liter frozen ferrofluid. The measurements were performed with a local magnetic field sensor based on Hall microprobes operated with the spinning current technique. The results obtained, though preliminary, qualitatively agree with the theoretical predictions of Fluctuation-Dissipation theor… ▽ More We present our first experimental determination of the magnetic noise of a superspinglass made of < 1 pico-liter frozen ferrofluid. The measurements were performed with a local magnetic field sensor based on Hall microprobes operated with the spinning current technique. The results obtained, though preliminary, qualitatively agree with the theoretical predictions of Fluctuation-Dissipation theorem (FDT) violation [1]. △ Less

Submitted 11 January, 2010; originally announced January 2010.

Comments: 4pages, 2 figures

Journal ref: AIP Conf. Proc., 1129, 153-156 (2009)

Rotor in a Cage: Infrared Spectroscopy of an Endohedral Hydrogen-Fullerene Complex

Authors: S. Mamone, Min Ge, D. Hüvonen, U. Nagel, A. Danquigny, F. Cuda, M. C. Grossel, Y. Murata, K. Komatsu, M. H. Levitt, T. Rõõm, M. Carravetta

Abstract: We report the observation of quantized translational and rotational motion of molecular hydrogen inside the cages of C60. Narrow infrared absorption lines at the temperature of 6K correspond to vibrational excitations in combination with translational and rotational excitations and show well resolved splittings due to the coupling between translational and rotational modes of the endohedral H2 m… ▽ More We report the observation of quantized translational and rotational motion of molecular hydrogen inside the cages of C60. Narrow infrared absorption lines at the temperature of 6K correspond to vibrational excitations in combination with translational and rotational excitations and show well resolved splittings due to the coupling between translational and rotational modes of the endohedral H2 molecule. A theoretical model shows that H2 inside C60 is a three-dimensional quantum rotor moving in a nearly spherical potential. The theory provides both the frequencies and the intensities of the observed infrared transitions. Good agreement with the experimental results is obtained by fitting a small number of empirical parameters to describe the confining potential, as well as the ortho to para ratio. △ Less

Submitted 9 January, 2009; v1 submitted 10 July, 2008; originally announced July 2008.

Comments: Submitted to The Journal of Chemical Physics, 4 pages, 2 eps figures

Journal ref: J. Chem. Phys., 130, 081103 (2009)

Aging behavior of spin glasses under bond and temperature perturbations from laser illumination

Authors: Ryuta Arai, katsuyoshi komatsu, Tetsuya Sato

Abstract: We have studied the nonequilibrium dynamics of spin glasses subjected to bond perturbation, which was based on the direct change in the spin-spin interaction $ΔJ$, using photo illumination in addition to temperature change $ΔT$. Differences in time-dependent magnetization are observed between that under $ΔT+ΔJ$ and $ΔT$ perturbations with the same $ΔT$. This differences shows the contribution of… ▽ More We have studied the nonequilibrium dynamics of spin glasses subjected to bond perturbation, which was based on the direct change in the spin-spin interaction $ΔJ$, using photo illumination in addition to temperature change $ΔT$. Differences in time-dependent magnetization are observed between that under $ΔT+ΔJ$ and $ΔT$ perturbations with the same $ΔT$. This differences shows the contribution of $ΔJ$ to spin-glass dynamics through the decrease in the overlap length. That is, the overlap length $L_{ΔT+ΔJ}$ under $ΔT+ΔJ$ perturbation is less than $L_{ΔT}$ under $ΔT$ perturbation. Furthermore, we observe the crossover between weakly and strongly perturbed regimes under bond cycling accompanied by temperature cycling. These effects of bond perturbation strongly indicates the existence of both chaos and the overlap length. △ Less

Submitted 6 January, 2007; v1 submitted 12 January, 2006; originally announced January 2006.

Comments: 8page, 7figure

Intermolecular bond stability of C60 dimers and 2D pressure-polymerized C60

Authors: P. Nagel, V. Pasler, S. Lebedkin, C. Meingast, B. Sundqvist, T. Tanaka, K. Komatsu

Abstract: The thermal stability of C60 dimers and 2D pressure-polymerized C60 is studied using high-resolution capacitance dilatometry. The transformation of both the dimer and the polymer phases back to 'normal' C60 is excellently described by a simple thermally activated process, with activation energies of 1.75 1 0.1 eV (dimer) and 1.9 1 0.2 eV (polymer). These results are compared to previous data of… ▽ More The thermal stability of C60 dimers and 2D pressure-polymerized C60 is studied using high-resolution capacitance dilatometry. The transformation of both the dimer and the polymer phases back to 'normal' C60 is excellently described by a simple thermally activated process, with activation energies of 1.75 1 0.1 eV (dimer) and 1.9 1 0.2 eV (polymer). These results are compared to previous data of 1D-polymerized C60 and photo-polymerized C60. The thermal expansivity of the 2D-polymer phase is as much as a factor of ten smaller than that of pure C60 and approaches values for diamond. △ Less

Submitted 22 April, 1998; originally announced April 1998.

Comments: to be published in: proceedings of Winterschool in Kirchberg on Molecular Nanostructures

Report number: INFP-98-2