-
Trajectories for the Optimal Collection of Information
Authors:
Matthew R. Kirchner,
David Grimsman,
Joao P. Hespanha,
Jason R. Marden
Abstract:
We study a scenario where an aircraft has multiple heterogeneous sensors collecting measurements to track a target vehicle of unknown location. The measurements are sampled along the flight path and our goals to optimize sensor placement to minimize estimation error. We select as a metric the Fisher Information Matrix (FIM), as "minimizing" the inverse of the FIM is required to achieve small estim…
▽ More
We study a scenario where an aircraft has multiple heterogeneous sensors collecting measurements to track a target vehicle of unknown location. The measurements are sampled along the flight path and our goals to optimize sensor placement to minimize estimation error. We select as a metric the Fisher Information Matrix (FIM), as "minimizing" the inverse of the FIM is required to achieve small estimation error. We propose to generate the optimal path from the Hamilton-Jacobi (HJ) partial differential equation (PDE) as it is the necessary and sufficient condition for optimality. A traditional method of lines (MOL) approach, based on a spatial grid, lends itself well to the highly non-linear and non-convex structure of the problem induced by the FIM matrix. However, the sensor placement problem results in a state space dimension that renders a naive MOL approach intractable. We present a new hybrid approach, whereby we decompose the state space into two parts: a smaller subspace that still uses a grid and takes advantage of the robustness to non-linearities and non-convexities, and the remaining state space that can by found efficiently from a system of ODEs, avoiding formation of a spatial grid.
△ Less
Submitted 12 January, 2023; v1 submitted 6 January, 2023;
originally announced January 2023.
-
Mid- and far-infrared localized surface plasmon resonances in chalcogen-hyperdoped silicon
Authors:
Mao Wang,
Ye Yu,
Slawomir Prucnal,
Yonder Berencén,
Mohd Saif Shaikh,
Lars Rebohle,
Muhammad Bilal Khan,
Vitaly Zviagin,
René Hübner,
Alexej Pashkin,
Artur Erbe,
Yordan M. Georgiev,
Marius Grundmann,
Manfred Helm,
Robert Kirchner,
Shengqiang Zhou
Abstract:
Plasmonic sensing in the infrared region employs the direct interaction of the vibrational fingerprints of molecules with the plasmonic resonances, creating surface-enhanced sensing platforms that are superior than the traditional spectroscopy. However, the standard noble metals used for plasmonic resonances suffer from high radiative losses as well as fabrication challenges, such as tuning the sp…
▽ More
Plasmonic sensing in the infrared region employs the direct interaction of the vibrational fingerprints of molecules with the plasmonic resonances, creating surface-enhanced sensing platforms that are superior than the traditional spectroscopy. However, the standard noble metals used for plasmonic resonances suffer from high radiative losses as well as fabrication challenges, such as tuning the spectral resonance positions into mid- to far-infrared regions, and the compatibility issue with the existing complementary metal-oxide-semiconductor (CMOS) manufacturing platform. Here, we demonstrate the occurrence of mid-infrared localized surface plasmon resonances (LSPR) in thin Si films hyperdoped with the known deep-level impurity tellurium. We show that the mid-infrared LSPR can be further enhanced and spectrally extended to the far-infrared range by fabricating two-dimensional arrays of micrometer-sized antennas in a Te-hyperdoped Si chip. Since Te-hyperdoped Si can also work as an infrared photodetector, we believe that our results will unlock the route toward the direct integration of plasmonic sensors with the one-chip CMOS platform, greatly advancing the possibility of mass manufacturing of high-performance plasmonic sensing systems.
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
Reachability as a Unifying Framework for Computing Helicopter Safe Operating Conditions and Autonomous Emergency Landing
Authors:
Matthew R. Kirchner,
Eddie Ball,
Jacques Hoffler,
Don Gaublomme
Abstract:
We present a numeric method to compute the safe operating flight conditions for a helicopter such that we can ensure a safe landing in the event of a partial or total engine failure. The unsafe operating region is the complement of the backwards reachable tube, which can be found as the sub-zero level set of the viscosity solution of a Hamilton-Jacobi (HJ) equation. Traditionally, numerical method…
▽ More
We present a numeric method to compute the safe operating flight conditions for a helicopter such that we can ensure a safe landing in the event of a partial or total engine failure. The unsafe operating region is the complement of the backwards reachable tube, which can be found as the sub-zero level set of the viscosity solution of a Hamilton-Jacobi (HJ) equation. Traditionally, numerical methods used to solve the HJ equation rely on a discrete grid of the solution space and exhibit exponential scaling with dimension, which is problematic for the high-fidelity dynamics models required for accurate helicopter modeling. We avoid the use of spatial grids by formulating a trajectory optimization problem, where the solution at each initial condition can be computed in a computationally efficient manner. The proposed method is shown to compute an autonomous landing trajectory from any operating condition, even in non-cruise flight conditions.
△ Less
Submitted 27 May, 2020; v1 submitted 16 May, 2020;
originally announced May 2020.
-
The Impact of Message Passing in Agent-Based Submodular Maximization
Authors:
David Grimsman,
Matthew R. Kirchner,
João P. Hespanha,
Jason R. Marden
Abstract:
This paper considers a set of sensors, which as a group are tasked with taking measurements of the environment and sending a small subset of the measurements to a centralized data fusion center, where the measurements will be used to estimate the overall state of the environment. The sensors' goal is to send the most informative set of measurements so that the estimate is as accurate as possible.…
▽ More
This paper considers a set of sensors, which as a group are tasked with taking measurements of the environment and sending a small subset of the measurements to a centralized data fusion center, where the measurements will be used to estimate the overall state of the environment. The sensors' goal is to send the most informative set of measurements so that the estimate is as accurate as possible. This problem is formulated as a submodular maximization problem, for which there exists a well-studied greedy algorithm, where each sensor sequentially chooses a set of measurements from its own local set, and communicates its decision to the future sensors in the sequence. In this work, sensors can additionally share measurements with one another, in order to augment the decision set of each sensor. We explore how this increase in communication can be exploited to improve the results of the nominal greedy algorithm. Specifically, we show that this measurement passing can improve the quality of the resulting measurement set by up to a factor of $n+1$, where $n$ is the number of sensors.
△ Less
Submitted 7 July, 2022; v1 submitted 6 April, 2020;
originally announced April 2020.
-
A Hamilton-Jacobi Formulation for Optimal Coordination of Heterogeneous Multiple Vehicle Systems
Authors:
Matthew R. Kirchner,
Mark J. Debord,
João P. Hespanha
Abstract:
We present a method for optimal coordination of multiple vehicle teams when multiple endpoint configurations are equally desirable, such as seen in the autonomous assembly of formation flight. The individual vehicles' positions in the formation are not assigned a priori and a key challenge is to find the optimal configuration assignment along with the optimal control and trajectory. Commonly, assi…
▽ More
We present a method for optimal coordination of multiple vehicle teams when multiple endpoint configurations are equally desirable, such as seen in the autonomous assembly of formation flight. The individual vehicles' positions in the formation are not assigned a priori and a key challenge is to find the optimal configuration assignment along with the optimal control and trajectory. Commonly, assignment and trajectory planning problems are solved separately. We introduce a new multi-vehicle coordination paradigm, where the optimal goal assignment and optimal vehicle trajectories are found simultaneously from a viscosity solution of a single Hamilton-Jacobi (HJ) partial differential equation (PDE), which provides a necessary and sufficient condition for global optimality. Intrinsic in this approach is that individual vehicle dynamic models need not be the same, and therefore can be applied to heterogeneous systems. Numerical methods to solve the HJ equation have historically relied on a discrete grid of the solution space and exhibits exponential scaling with system dimension, preventing their applicability to multiple vehicle systems. By utilizing a generalization of the Hopf formula, we avoid the use of grids and present a method that exhibits polynomial scaling in the number of vehicles.
△ Less
Submitted 19 April, 2021; v1 submitted 12 March, 2020;
originally announced March 2020.
-
Heterogeneous Measurement Selection for Vehicle Tracking using Submodular Optimization
Authors:
Matthew R. Kirchner,
João P. Hespanha,
Denis Garagić
Abstract:
We study a scenario where a group of agents, each with multiple heterogeneous sensors are collecting measurements of a vehicle and the measurements are transmitted over a communication channel to a centralized node for processing. The communication channel presents an information-transfer bottleneck as the sensors collect measurements at a much higher rate than what is feasible to transmit over th…
▽ More
We study a scenario where a group of agents, each with multiple heterogeneous sensors are collecting measurements of a vehicle and the measurements are transmitted over a communication channel to a centralized node for processing. The communication channel presents an information-transfer bottleneck as the sensors collect measurements at a much higher rate than what is feasible to transmit over the communication channel. In order to minimize the estimation error at the centralized node, only a carefully selected subset of measurements should be transmitted. We propose to select measurements based on the Fisher information matrix (FIM), as "minimizing" the inverse of the FIM is required to achieve small estimation error.
Selecting measurements based on the FIM leads to a combinatorial optimization problem. However, when the criteria used to select measurements is both monotone and submodular it allows the use of a greedy algorithm that is guaranteed to be within $1-1/e\approx63\%$ of the optimum and has the critical benefit of quadratic computational complexity. To illustrate this concept, we derive the FIM criterion for different sensor types to which we apply FIM-based measurement selection. The criteria considered include the time-of-arrival and Doppler shift of passively received radio transmissions as well as detected key-points in camera images.
△ Less
Submitted 27 May, 2020; v1 submitted 21 October, 2019;
originally announced October 2019.
-
Patterning of diamond like carbon films for sensor applications using silicon containing thermoplastic resist (SiPol) as a hard mask
Authors:
D. Virganavičius,
V. J. Cadarso,
R. Kirchner,
L. Stankevičius,
T. Tamulevičius,
S. Tamulevičius,
H. Schift
Abstract:
Patterning of diamond-like carbon (DLC) and DLC:metal nanocomposites is of interest for an increasing number of applications. We demonstrate a nanoimprint lithography process based on silicon containing thermoplastic resist combined with plasma etching for straightforward patterning of such films. A variety of different structures with few hundred nanometer feature size and moderate aspect ratios…
▽ More
Patterning of diamond-like carbon (DLC) and DLC:metal nanocomposites is of interest for an increasing number of applications. We demonstrate a nanoimprint lithography process based on silicon containing thermoplastic resist combined with plasma etching for straightforward patterning of such films. A variety of different structures with few hundred nanometer feature size and moderate aspect ratios were successfully realized. The quality of produced patterns was directly investigated by the means of optical and scanning electron microscopy (SEM). Such structures were further assessed by employing them in the development of gratings for guided mode resonance (GMR) effect. Optical characterization of such leaky waveguide was compared with numerical simulations based on rigorous coupled wave analysis method with good agreement. The use of such structures as refractive index variation sensors is demonstrated with sensitivity up to 319 nm/RIU, achieving an improvement close to 450% in sensitivity compared to previously reported similar sensors. This pronounced GMR signal fully validates the employed DLC material, the technology to pattern it and the possibility to develop DLC based gratings as corrosion and wear resistant refractometry sensors that are able to operate under harsh conditions providing great value and versatility.
△ Less
Submitted 3 April, 2019;
originally announced April 2019.
-
A Level Set Approach to Online Sensing and Trajectory Optimization with Time Delays
Authors:
Matthew R. Kirchner
Abstract:
Presented is a method to compute certain classes of Hamilton-Jacobi equations that result from optimal control and trajectory generation problems with time delays. Many robotic control and trajectory problems have limited information of the operating environment a priori and must continually perform online trajectory optimization in real time after collecting measurements. The sensing and optimiza…
▽ More
Presented is a method to compute certain classes of Hamilton-Jacobi equations that result from optimal control and trajectory generation problems with time delays. Many robotic control and trajectory problems have limited information of the operating environment a priori and must continually perform online trajectory optimization in real time after collecting measurements. The sensing and optimization can induce a significant time delay, and must be accounted for when computing the trajectory. This paper utilizes the generalized Hopf formula, which avoids the exponential dimensional scaling typical of other numerical methods for computing solutions to the Hamilton-Jacobi equation. We present as an example a robot that incrementally predicts a communication channel from measurements as it travels. As part of this example, we introduce a seemingly new generalization of a non-parametric formulation of robotic communication channel estimation. New communication measurements are used to improve the channel estimate and online trajectory optimization with time-delay compensation is performed.
△ Less
Submitted 5 June, 2019; v1 submitted 30 January, 2019;
originally announced January 2019.
-
Automatic Thresholding of SIFT Descriptors
Authors:
Matthew R. Kirchner
Abstract:
We introduce a method to perform automatic thresholding of SIFT descriptors that improves matching performance by at least 15.9% on the Oxford image matching benchmark. The method uses a contrario methodology to determine a unique bin magnitude threshold. This is done by building a generative uniform background model for descriptors and determining when bin magnitudes have reached a sufficient lev…
▽ More
We introduce a method to perform automatic thresholding of SIFT descriptors that improves matching performance by at least 15.9% on the Oxford image matching benchmark. The method uses a contrario methodology to determine a unique bin magnitude threshold. This is done by building a generative uniform background model for descriptors and determining when bin magnitudes have reached a sufficient level. The presented method, called meaningful clamping, contrasts from the current SIFT implementation by efficiently computing a clamping threshold that is unique for every descriptor.
△ Less
Submitted 7 November, 2018;
originally announced November 2018.
-
A Primal-Dual Method for Optimal Control and Trajectory Generation in High-Dimensional Systems
Authors:
Matthew R. Kirchner,
Gary Hewer,
Jerome Darbon,
Stanley Osher
Abstract:
Presented is a method for efficient computation of the Hamilton-Jacobi (HJ) equation for time-optimal control problems using the generalized Hopf formula. Typically, numerical methods to solve the HJ equation rely on a discrete grid of the solution space and exhibit exponential scaling with dimension. The generalized Hopf formula avoids the use of grids and numerical gradients by formulating an un…
▽ More
Presented is a method for efficient computation of the Hamilton-Jacobi (HJ) equation for time-optimal control problems using the generalized Hopf formula. Typically, numerical methods to solve the HJ equation rely on a discrete grid of the solution space and exhibit exponential scaling with dimension. The generalized Hopf formula avoids the use of grids and numerical gradients by formulating an unconstrained convex optimization problem. The solution at each point is completely independent, and allows a massively parallel implementation if solutions at multiple points are desired. This work presents a primal-dual method for efficient numeric solution and presents how the resulting optimal trajectory can be generated directly from the solution of the Hopf formula, without further optimization. Examples presented have execution times on the order of milliseconds and experiments show computation scales approximately polynomial in dimension with very small high-order coefficients.
△ Less
Submitted 13 June, 2018; v1 submitted 21 December, 2017;
originally announced December 2017.
-
Lithographic performance of ZEP520A and mr-PosEBR resists exposed by electron beam and extreme ultraviolet lithography
Authors:
Roberto Fallica,
Dimitrios Kazazis,
Robert Kirchner,
Anja Voigt,
Iacopo Mochi,
Helmut Schift,
Yasin Ekinci
Abstract:
Pattern transfer by deep anisotropic etch is a well-established technique for fabrication of nanoscale devices and structures. For this technique to be effective, the resist material plays a key role and must have high resolution, reasonable sensitivity and high etch selectivity against the conventional silicon substrate or underlayer film. In this work, the lithographic performance of two high et…
▽ More
Pattern transfer by deep anisotropic etch is a well-established technique for fabrication of nanoscale devices and structures. For this technique to be effective, the resist material plays a key role and must have high resolution, reasonable sensitivity and high etch selectivity against the conventional silicon substrate or underlayer film. In this work, the lithographic performance of two high etch resistance materials was evaluated: ZEP520A (Nippon Zeon Co.) and mr-PosEBR (micro resist technology GmbH). Both materials are positive tone, polymer-based and non-chemically amplified resists. Two exposure techniques were used: electron beam lithography (EBL) and extreme ultraviolet (EUV) lithography. These resists were originally designed for EBL patterning, where high quality patterning at sub-100 nm resolution was previously demonstrated. In the scope of this work, we also aim to validate their extendibility to EUV for high resolution and large area patterning. To this purpose, the same EBL process conditions were employed at EUV. The figures of merit, i.e. dose to clear, dose to size, and resolution, were extracted and these results are discussed systematically. It was found that both materials are very fast at EUV (dose to clear lower than 12 mJ/cm2) and are capable of resolving dense lines/space arrays with a resolution of 25 nm half-pitch. The quality of patterns was also very good and the sidewall roughness was below 6 nm. Interestingly, the general-purpose process used for EBL can be extended straightforwardly to EUV lithography with comparable high quality and yield. Our findings open new possibilities for lithographers who wish to devise novel fabrication schemes exploiting EUV for fabrication of nanostructures by deep etch pattern transfer.
△ Less
Submitted 24 October, 2017;
originally announced October 2017.
-
Time-Optimal Collaborative Guidance Using the Generalized Hopf Formula
Authors:
Matthew R. Kirchner,
Robert Mar,
Gary Hewer,
Jérôme Darbon,
Stanley Osher,
Y. T. Chow
Abstract:
Presented is a new method for calculating the time-optimal guidance control for a multiple vehicle pursuit-evasion system. A joint differential game of k pursuing vehicles relative to the evader is constructed, and a Hamilton-Jacobi-Isaacs (HJI) equation that describes the evolution of the value function is formulated. The value function is built such that the terminal cost is the squared distance…
▽ More
Presented is a new method for calculating the time-optimal guidance control for a multiple vehicle pursuit-evasion system. A joint differential game of k pursuing vehicles relative to the evader is constructed, and a Hamilton-Jacobi-Isaacs (HJI) equation that describes the evolution of the value function is formulated. The value function is built such that the terminal cost is the squared distance from the boundary of the terminal surface. Additionally, all vehicles are assumed to have bounded controls. Typically, a joint state space constructed in this way would have too large a dimension to be solved with existing grid-based approaches. The value function is computed efficiently in high-dimensional space, without a discrete grid, using the generalized Hopf formula. The optimal time-to-reach is iteratively solved, and the optimal control is inferred from the gradient of the value function.
△ Less
Submitted 16 December, 2017; v1 submitted 19 September, 2017;
originally announced September 2017.
-
A comparative study of resists and lithographic tools using the Lumped Parameter Model
Authors:
Roberto Fallica,
Robert Kirchner,
Dominique Mailly,
Yasin Ekinci
Abstract:
A comparison of the performance of high resolution lithographic tools is presented here. We use extreme ultraviolet interference lithography, electron beam lithography, and He ion beam lithography tools on two different resists that are processed under the same conditions. The dose-to-clear and the lithographic contrast are determined experimentally and are used to compare the relative efficiency…
▽ More
A comparison of the performance of high resolution lithographic tools is presented here. We use extreme ultraviolet interference lithography, electron beam lithography, and He ion beam lithography tools on two different resists that are processed under the same conditions. The dose-to-clear and the lithographic contrast are determined experimentally and are used to compare the relative efficiency of each tool. The results are compared to previous studies and interpreted in the light of each tool-specific secondary electron yield. In addition, the patterning performance is studied by exposing dense line/spaces patterns and the relation between critical dimension and exposure dose is discussed. Finally, the Lumped Parameter Model is employed in order to quantitatively estimate the critical dimension of line/spaces, using each tool specific aerial image. Our implementation is then validated by fitting the model to the experimental data from interference lithography exposures, and extracting the resist contrast.
△ Less
Submitted 22 March, 2017;
originally announced March 2017.
-
GEMINI: integrative exploration of genetic variation and genome annotations
Authors:
Uma Paila,
Brad Chapman,
Rory Kirchner,
Aaron Quinlan
Abstract:
Modern DNA sequencing technologies enable geneticists to rapidly identify genetic variation among many human genomes. However, isolating the minority of variants underlying disease remains an important, yet formidable challenge for medical genetics. We have developed GEMINI (GEnome MINIng), a flexible software package for exploring all forms of human genetic variation. Unlike existing tools, GEMIN…
▽ More
Modern DNA sequencing technologies enable geneticists to rapidly identify genetic variation among many human genomes. However, isolating the minority of variants underlying disease remains an important, yet formidable challenge for medical genetics. We have developed GEMINI (GEnome MINIng), a flexible software package for exploring all forms of human genetic variation. Unlike existing tools, GEMINI integrates genetic variation with a diverse and flexible set of genome annotations (e.g., dbSNP, ENCODE, UCSC, ClinVar, KEGG) into a unified database to facilitate interpretation and data exploration. Whereas other methods provide an inflexible set of variant filters or variant prioritization methods, GEMINI allows researchers to compose complex queries based on sample genotypes, inheritance patterns, and both pre-installed and custom genome annotations. GEMINI also provides methods for ad hoc queries and data exploration, a simple programming interface for custom analyses that leverage the underlying database, and both command line and graphical tools for common analyses. We demonstrate the utility of GEMINI for exploring variation in personal genomes and family based genetic studies, and illustrate its ability to scale to studies involving thousands of human samples. GEMINI is designed for reproducibility and flexibility and our goal is to will provide researchers with a standard framework for medical genomics.
△ Less
Submitted 18 April, 2013; v1 submitted 17 April, 2013;
originally announced April 2013.
-
Variation after Particle-Number Projection for the HFB Method with the Skyrme Energy Density Functional
Authors:
M. V. Stoitsov,
J. Dobaczewski,
R. Kirchner,
W. Nazarewicz,
J. Terasaki
Abstract:
Variation after particle-number restoration is incorporated for the first time into the Hartree-Fock-Bogoliubov framework employing the Skyrme energy density functional with zero-range pairing. The resulting projected HFB equations can be expressed in terms of the local gauge-angle-dependent densities. Results of projected calculations are compared with those obtained within the Lipkin-Nogami me…
▽ More
Variation after particle-number restoration is incorporated for the first time into the Hartree-Fock-Bogoliubov framework employing the Skyrme energy density functional with zero-range pairing. The resulting projected HFB equations can be expressed in terms of the local gauge-angle-dependent densities. Results of projected calculations are compared with those obtained within the Lipkin-Nogami method in the standard version and with the Lipkin-Nogami method followed by exact particle-number projection.
△ Less
Submitted 13 October, 2006;
originally announced October 2006.
-
Nuclear Charge Radius of Li-9, Li-11: Halo Neutron: the influence of Halo Neutrons
Authors:
R. Sánchez,
W. Nörtershäuser,
G. Ewald,
D. Albers,
J. Behr,
P. Bricault,
B. A. Bushaw,
A. Dax,
J. Dilling,
M. Dombsky,
G. W. F. Drake,
S. Götte,
R. Kirchner,
H. -J. Kluge,
Th. Kühl,
J. Lassen,
C. D. P. Levy,
M. Pearson,
E. Prime,
V. Ryjkov,
A. Wojtaszek,
Z. -C. Yan,
C. Zimmermann
Abstract:
The nuclear charge radius of Li-11 has been determined for the first time by high precision laser spectroscopy. On-line measurements at TRIUMF-ISAC yielded a Li-7 - Li-11 isotope shift (IS) of 25101.23(13) MHz for the Doppler-free 2s - 3s transition. IS precision for all other bound Li isotopes was also improved. Differences from calculated mass-based IS yield values for change in charge radius…
▽ More
The nuclear charge radius of Li-11 has been determined for the first time by high precision laser spectroscopy. On-line measurements at TRIUMF-ISAC yielded a Li-7 - Li-11 isotope shift (IS) of 25101.23(13) MHz for the Doppler-free 2s - 3s transition. IS precision for all other bound Li isotopes was also improved. Differences from calculated mass-based IS yield values for change in charge radius along the isotope chain. The charge radius decreases monotonically from Li-6 to Li-9, and then increases from 2.217(35) fm to 2.467(37) fm for Li-11. This is compared to various models, and it is found that a combination of halo neutron correlation and intrinsic core excitation best reproduces the experimental results.
△ Less
Submitted 16 November, 2005; v1 submitted 30 September, 2005;
originally announced September 2005.
-
Adjoint modes as probes of gauge field structure
Authors:
Antonio Gonzalez-Arroyo,
Robert Kirchner
Abstract:
We show how zero-modes and quasi-zero-modes of the Dirac operator in the adjoint representation can be used to construct an estimate of the action density distribution of a pure gauge field theory, which is less sensitive to the ultraviolet fluctuations of the field. This can be used to trace the topological structures present in the vacuum. The construction relies on the special properties sati…
▽ More
We show how zero-modes and quasi-zero-modes of the Dirac operator in the adjoint representation can be used to construct an estimate of the action density distribution of a pure gauge field theory, which is less sensitive to the ultraviolet fluctuations of the field. This can be used to trace the topological structures present in the vacuum. The construction relies on the special properties satisfied by the supersymmetric zero-modes.
△ Less
Submitted 24 July, 2005;
originally announced July 2005.
-
High-precision measurement of the half-life of $^{62}$Ga
Authors:
B. Blank,
G. Savard,
J. Doring,
A. Blazhev,
G. Canchel,
M. Chartier,
D. Henderson,
Z. Janas,
R. Kirchner,
I. Mukha,
E. Roeckl,
K. Schmidt,
J. Zylicz
Abstract:
The beta-decay half-life of 62Ga has been studied with high precision using on-line mass separated samples. The decay of 62Ga which is dominated by a 0+ to 0+ transition to the ground state of 62Zn yields a half-life of T_{1/2} = 116.19(4) ms. This result is more precise than any previous measurement by about a factor of four or more. The present value is in agreement with older literature value…
▽ More
The beta-decay half-life of 62Ga has been studied with high precision using on-line mass separated samples. The decay of 62Ga which is dominated by a 0+ to 0+ transition to the ground state of 62Zn yields a half-life of T_{1/2} = 116.19(4) ms. This result is more precise than any previous measurement by about a factor of four or more. The present value is in agreement with older literature values, but slightly disagrees with a recent measurement. We determine an error weighted average value of all experimental half-lives of 116.18(4) ms.
△ Less
Submitted 29 October, 2003;
originally announced October 2003.
-
The supersymmetric Ward identities on the lattice
Authors:
F. Farchioni,
A. Feo,
T. Galla,
C. Gebert,
R. Kirchner,
I. Montvay,
G. Münster,
A. Vladikas
Abstract:
Supersymmetric (SUSY) Ward identities are considered for the N=1 SU(2) SUSY Yang Mills theory discretized on the lattice with Wilson fermions (gluinos). They are used in order to compute non-perturbatively a subtracted gluino mass and the mixing coefficient of the SUSY current. The computations were performed at gauge coupling $β$=2.3 and hopping parameter $κ$=0.1925, 0.194, 0.1955 using the two…
▽ More
Supersymmetric (SUSY) Ward identities are considered for the N=1 SU(2) SUSY Yang Mills theory discretized on the lattice with Wilson fermions (gluinos). They are used in order to compute non-perturbatively a subtracted gluino mass and the mixing coefficient of the SUSY current. The computations were performed at gauge coupling $β$=2.3 and hopping parameter $κ$=0.1925, 0.194, 0.1955 using the two-step multi-bosonic dynamical-fermion algorithm. Our results are consistent with a scenario where the Ward identities are satisfied up to O(a) effects. The vanishing of the gluino mass occurs at a value of the hopping parameter which is not fully consistent with the estimate based on the chiral phase transition. This suggests that, although SUSY restoration appears to occur close to the continuum limit of the lattice theory, the results are still affected by significant systematic effects.
△ Less
Submitted 11 January, 2002; v1 submitted 7 November, 2001;
originally announced November 2001.
-
SUSY Ward identities in 1-loop perturbation theory
Authors:
Federico Farchioni,
Alessandra Feo,
Tobias Galla,
Claus Gebert,
Robert Kirchner,
Istvan Montvay,
Gernot Muenster,
Roland Peetz,
Anastassios Vladikas
Abstract:
We present preliminary results of a study of the supersymmetric (SUSY) Ward identities (WIs) for the N=1 SU(2) SUSY Yang-Mills theory in the context of one-loop lattice perturbation theory. The supersymmetry on the lattice is explicitly broken by the gluino mass and the lattice artifacts. However, the renormalization of the supercurrent can be carried out in a scheme that restores the nominal co…
▽ More
We present preliminary results of a study of the supersymmetric (SUSY) Ward identities (WIs) for the N=1 SU(2) SUSY Yang-Mills theory in the context of one-loop lattice perturbation theory. The supersymmetry on the lattice is explicitly broken by the gluino mass and the lattice artifacts. However, the renormalization of the supercurrent can be carried out in a scheme that restores the nominal continuum WIs. The perturbative calculation of the renormalization constants and mixing coefficients for the local supercurrent is presented.
△ Less
Submitted 16 October, 2001; v1 submitted 15 October, 2001;
originally announced October 2001.
-
Lattice supersymmetric Ward identities
Authors:
F. Farchioni,
A. Feo,
T. Galla,
C. Gebert,
R. Kirchner,
I. Montvay,
G. Münster,
A. Vladikas
Abstract:
SUSY Ward identities for the N=1 SU(2) SUSY Yang-Mills theory are studied on the lattice in a non-perturbative numerical approach. As a result a determination of the subtracted gluino mass is obtained.
SUSY Ward identities for the N=1 SU(2) SUSY Yang-Mills theory are studied on the lattice in a non-perturbative numerical approach. As a result a determination of the subtracted gluino mass is obtained.
△ Less
Submitted 15 October, 2001;
originally announced October 2001.
-
On the 1-loop lattice perturbation theory of the supersymmetric Ward identities
Authors:
Federico Farchioni,
Alessandra Feo,
Tobias Galla,
Claus Gebert,
Robert Kirchner,
István Montvay,
Gernot Münster
Abstract:
The one loop corrections to the supersymmetric Ward identities (WIs) in the discretized N=1 SU(2) supersymmetric Yang-Mills theory can be investigated by means of lattice perturbation theory. The supersymmetry (SUSY) is explicitly broken by the lattice discretization as well as by the introduction of Wilson fermions. However, the renormalization of the supercurrent can be carried out in a scheme…
▽ More
The one loop corrections to the supersymmetric Ward identities (WIs) in the discretized N=1 SU(2) supersymmetric Yang-Mills theory can be investigated by means of lattice perturbation theory. The supersymmetry (SUSY) is explicitly broken by the lattice discretization as well as by the introduction of Wilson fermions. However, the renormalization of the supercurrent can be carried out in a scheme that restores the nominal continuum WIs. We present our work in progress which is concerned with the 1-loop renormalization of the local supercurrent, i.e. with the perturbative computation of the corresponding renormalization constants and mixing coefficients.
△ Less
Submitted 4 November, 2000;
originally announced November 2000.
-
SUSY Ward identities in N=1 SYM theory on the lattice
Authors:
F. Farchioni,
A. Feo,
T. Galla,
C. Gebert,
R. Kirchner,
I. Montvay,
G. Münster,
A. Vladikas
Abstract:
The SUSY Ward identities (WIs) for the N=1 SU(2) SUSY Yang Mills theory discretized on the lattice with Wilson fermions (gluinos) are considered. The study is performed in the framework of a Monte Carlo simulation of the model with light dynamical gluinos. The renormalization and mixing constants of the lattice SUSY current $Z_S$ and $Z_T$ and the additively renormalized gluino mass $m_S$ are un…
▽ More
The SUSY Ward identities (WIs) for the N=1 SU(2) SUSY Yang Mills theory discretized on the lattice with Wilson fermions (gluinos) are considered. The study is performed in the framework of a Monte Carlo simulation of the model with light dynamical gluinos. The renormalization and mixing constants of the lattice SUSY current $Z_S$ and $Z_T$ and the additively renormalized gluino mass $m_S$ are unknown parameters of the SUSY WIs. Using suitable on-shell combinations of the WIs, the ratios $Z_T/Z_S$ and $m_S/Z_S$ are determined non-perturbatively at one value of the coupling constant $g_0$ and two values of the hopping parameter $κ$.
△ Less
Submitted 27 October, 2000;
originally announced October 2000.
-
Low-energy features of SU(2) Yang-Mills theory with light gluinos
Authors:
Alessandra Feo,
Robert Kirchner,
Istvan Montvay,
Anastassios Vladikas
Abstract:
We report on the latest results of the low-lying spectrum of bound states in SU(2) Yang-Mills theory with light gluinos. The behavior of the disconnected contributions in the critical region is analyzed. A first investigation of a three-gluino state is also discussed.
We report on the latest results of the low-lying spectrum of bound states in SU(2) Yang-Mills theory with light gluinos. The behavior of the disconnected contributions in the critical region is analyzed. A first investigation of a three-gluino state is also discussed.
△ Less
Submitted 9 September, 1999;
originally announced September 1999.
-
Numerical simulations of dynamical gluinos in SU(3) Yang-Mills theory: first results
Authors:
Alessandra Feo,
Robert Kirchner,
Silke Luckmann,
Istvan Montvay,
Gernot Münster
Abstract:
In a numerical Monte Carlo simulation of SU(3) Yang-Mills theory with dynamical gluinos we have investigated the behaviour of the expectation value of the scalar and pseudoscalar gluino condensates in order to determine the phase structure. Preliminary results are presented as a function of the hopping parameter.
In a numerical Monte Carlo simulation of SU(3) Yang-Mills theory with dynamical gluinos we have investigated the behaviour of the expectation value of the scalar and pseudoscalar gluino condensates in order to determine the phase structure. Preliminary results are presented as a function of the hopping parameter.
△ Less
Submitted 11 September, 1999; v1 submitted 9 September, 1999;
originally announced September 1999.
-
Monte Carlo simulation of SU(2) Yang-Mills theory with light gluinos
Authors:
I. Campos,
A. Feo,
R. Kirchner,
S. Luckmann,
I. Montvay,
G. Münster,
K. Spanderen,
J. Westphalen
Abstract:
In a numerical Monte Carlo simulation of SU(2) Yang-Mills theory with light dynamical gluinos the low energy features of the dynamics as confinement and bound state mass spectrum are investigated. The motivation is supersymmetry at vanishing gluino mass. The performance of the applied two-step multi-bosonic dynamical fermion algorithm is discussed.
In a numerical Monte Carlo simulation of SU(2) Yang-Mills theory with light dynamical gluinos the low energy features of the dynamics as confinement and bound state mass spectrum are investigated. The motivation is supersymmetry at vanishing gluino mass. The performance of the applied two-step multi-bosonic dynamical fermion algorithm is discussed.
△ Less
Submitted 10 March, 1999;
originally announced March 1999.
-
Evidence for discrete chiral symmetry breaking in N=1 supersymmetric Yang-Mills theory
Authors:
R. Kirchner,
S. Luckmann,
I. Montvay,
K. Spanderen,
J. Westphalen
Abstract:
In a numerical Monte Carlo simulation of SU(2) Yang-Mills theory with dynamical gauginos we find evidence for two degenerate ground states at the supersymmetry point corresponding to zero gaugino mass. This is consistent with the expected pattern of spontaneous discrete chiral symmetry breaking $Z_4 \to Z_2$ caused by gaugino condensation.
In a numerical Monte Carlo simulation of SU(2) Yang-Mills theory with dynamical gauginos we find evidence for two degenerate ground states at the supersymmetry point corresponding to zero gaugino mass. This is consistent with the expected pattern of spontaneous discrete chiral symmetry breaking $Z_4 \to Z_2$ caused by gaugino condensation.
△ Less
Submitted 28 October, 1998;
originally announced October 1998.
-
Numerical simulation of dynamical gluinos: experience with a multi-bosonic algorithm and first results
Authors:
R. Kirchner,
S. Luckmann,
I. Montvay,
K. Spanderen,
J. Westphalen
Abstract:
We report on our experience with the two-step multi-bosonic algorithm in a large scale Monte Carlo simulation of the SU(2) Yang-Mills theory with dynamical gluinos. First results are described on the low lying spectrum of bound states, the string tension and the gluino condensate.
We report on our experience with the two-step multi-bosonic algorithm in a large scale Monte Carlo simulation of the SU(2) Yang-Mills theory with dynamical gluinos. First results are described on the low lying spectrum of bound states, the string tension and the gluino condensate.
△ Less
Submitted 20 August, 1998;
originally announced August 1998.
-
A critical comparison of different definitions of topological charge on the lattice
Authors:
B. Alles,
M. D'Elia,
A. Di Giacomo,
R. Kirchner
Abstract:
A detailed comparison is made between the field-theoretic and geometric definitions of topological charge density on the lattice. Their renormalizations with respect to continuum are analysed. The definition of the topological susceptibility, as used in chiral Ward identities, is reviewed. After performing the subtractions required by it, the different lattice methods yield results in agreement…
▽ More
A detailed comparison is made between the field-theoretic and geometric definitions of topological charge density on the lattice. Their renormalizations with respect to continuum are analysed. The definition of the topological susceptibility, as used in chiral Ward identities, is reviewed. After performing the subtractions required by it, the different lattice methods yield results in agreement with each other. The methods based on cooling and on counting fermionic zero modes are also discussed.
△ Less
Submitted 7 August, 1998; v1 submitted 13 November, 1997;
originally announced November 1997.
-
Topology in SU(2) Yang-Mills theory
Authors:
B. Alles,
M. D'Elia,
A. Di Giacomo,
R. Kirchner
Abstract:
New results on the topology of the SU(2) Yang-Mills theory are presented. At zero temperature we obtain the value of the topological susceptibility by using the recently introduced smeared operators as well as a properly renormalized geometric definition. Both determinations are in agreement. At non-zero temperature we study the behaviour of the topological susceptibility across the confinement…
▽ More
New results on the topology of the SU(2) Yang-Mills theory are presented. At zero temperature we obtain the value of the topological susceptibility by using the recently introduced smeared operators as well as a properly renormalized geometric definition. Both determinations are in agreement. At non-zero temperature we study the behaviour of the topological susceptibility across the confinement transition pointing out some qualitative differences with respect to the analogous result for the SU(3) gauge theory.
△ Less
Submitted 20 September, 1997;
originally announced September 1997.
-
The rp-process and new measurements of beta-delayed proton decay of light Ag and Cd isotopes
Authors:
G. Raimann,
M. J. Balbes,
R. N. Boyd,
D. Cano-Ott,
R. Collatz,
A. Guglielmetti,
M. Hellström,
M. Hencheck,
Z. Hu,
Z. Janas,
M. Karny,
R. Kirchner,
J. Morford,
D. J. Morrissey,
E. Roeckl,
K. Schmidt,
J. Szerypo,
A. Weber
Abstract:
Recent network calculations suggest that a high temperature rp-process could explain the abundances of light Mo and Ru isotopes, which have long challenged models of p-process nuclide production. Important ingredients to network calculations involving unstable nuclei near and at the proton drip line are $β$-halflives and decay modes, i.e., whether or not $β$-delayed proton decay takes place. Of…
▽ More
Recent network calculations suggest that a high temperature rp-process could explain the abundances of light Mo and Ru isotopes, which have long challenged models of p-process nuclide production. Important ingredients to network calculations involving unstable nuclei near and at the proton drip line are $β$-halflives and decay modes, i.e., whether or not $β$-delayed proton decay takes place. Of particular importance to these network calculation are the proton-rich isotopes $^{96}$Ag, $^{98}$Ag, $^{96}$Cd and $^{98}$Cd. We report on recent measurements of $β$-delayed proton branching ratios for $^{96}$Ag, $^{98}$Ag, and $^{98}$Cd at the on-line mass separator at GSI.
△ Less
Submitted 5 July, 1996;
originally announced July 1996.
