-
Total Ionizing Dose Effects on CMOS Image Sensor for the ULTRASAT Space Mission
Authors:
Vlad D. Berlea,
Steven Worm,
Nirmal Kaipachery,
Shrinivasrao R. Kulkarni,
Shashank Kumar,
Merlin F. Barschke,
David Berge,
Adi Birman,
Shay Alfassi,
Amos Fenigstein
Abstract:
ULTRASAT (ULtraviolet TRansient Astronomy SATellite) is a wide-angle space telescope that will perform deep time-resolved surveys in the near-ultraviolet spectrum. ULTRASAT is a space mission led by the Weizmann Institute of Science and the Israel Space Agency and is planned for launch in 2025. The camera implements backside-illuminated, stitched pixel sensors. The pixel has a dual-conversion-gain…
▽ More
ULTRASAT (ULtraviolet TRansient Astronomy SATellite) is a wide-angle space telescope that will perform deep time-resolved surveys in the near-ultraviolet spectrum. ULTRASAT is a space mission led by the Weizmann Institute of Science and the Israel Space Agency and is planned for launch in 2025. The camera implements backside-illuminated, stitched pixel sensors. The pixel has a dual-conversion-gain 4T architecture, with a pitch of $9.5$ $μm$ and is produced in a $180$ $nm$ process by Tower Semiconductor. Before the final sensor was available for testing, test sensors provided by Tower were used to gain first insights into the pixel's radiation tolerance. One of the main contributions to sensor degradation due to radiation for the ULTRASAT mission is Total Ionizing Dose (TID). TID measurements on the test sensors have been performed with a Co-60 gamma source at Helmholz Zentrum Berlin and CC-60 facility at CERN and preliminary results are presented.
△ Less
Submitted 27 June, 2023;
originally announced June 2023.
-
The scientific payload of the Ultraviolet Transient Astronomy Satellite (ULTRASAT)
Authors:
Sagi Ben-Ami,
Yossi Shvartzvald,
Eli Waxman,
Udi Netzer,
Yoram Yaniv,
Viktor M. Algranatti,
Avishay Gal-Yam,
Ofer Lapid,
Eran Ofek,
Jeremy Topaz,
Iair Arcavi,
Arooj Asif,
Shlomi Azaria,
Eran Bahalul,
Merlin F. Barschke,
Benjamin Bastian-Querner,
David Berge,
Vlad D. Berlea,
Rolf Buhler,
Louise Dittmar,
Anatoly Gelman,
Gianluca Giavitto,
Or Guttman,
Juan M. Haces Crespo,
Daniel Heilbrunn
, et al. (23 additional authors not shown)
Abstract:
The Ultraviolet Transient Astronomy Satellite (ULTRASAT) is a space-borne near UV telescope with an unprecedented large field of view (200 sq. deg.). The mission, led by the Weizmann Institute of Science and the Israel Space Agency in collaboration with DESY (Helmholtz association, Germany) and NASA (USA), is fully funded and expected to be launched to a geostationary transfer orbit in Q2/3 of 202…
▽ More
The Ultraviolet Transient Astronomy Satellite (ULTRASAT) is a space-borne near UV telescope with an unprecedented large field of view (200 sq. deg.). The mission, led by the Weizmann Institute of Science and the Israel Space Agency in collaboration with DESY (Helmholtz association, Germany) and NASA (USA), is fully funded and expected to be launched to a geostationary transfer orbit in Q2/3 of 2025. With a grasp 300 times larger than GALEX, the most sensitive UV satellite to date, ULTRASAT will revolutionize our understanding of the hot transient universe, as well as of flaring galactic sources. We describe the mission payload, the optical design and the choice of materials allowing us to achieve a point spread function of ~10arcsec across the FoV, and the detector assembly. We detail the mitigation techniques implemented to suppress out-of-band flux and reduce stray light, detector properties including measured quantum efficiency of scout (prototype) detectors, and expected performance (limiting magnitude) for various objects.
△ Less
Submitted 11 March, 2023; v1 submitted 30 July, 2022;
originally announced August 2022.
-
Sensor characterization for the ULTRASAT space telescope
Authors:
Benjamin Bastian-Querner,
Nirmal Kaipachery,
Daniel Küsters,
Julian Schliwinski,
Shay Alfassi,
Arooj Asif,
Merlin F. Barschke,
Sagi Ben-Ami,
David Berge,
Adi Birman,
Rolf Bühler,
Nicola De Simone,
Amos Fenigstein,
Avishay Gal-Yam,
Gianluca Giavitto,
Juan M. Haces Crespo,
Dmitri Ivanov,
Omer Katz,
Marek Kowalski,
Shrinivasrao R. Kulkarni,
Ofer Lapid,
Tuvia Liran,
Ehud Netzer,
Eran O. Ofek,
Sebastian Philipp
, et al. (9 additional authors not shown)
Abstract:
The Ultraviolet Transient Astronomical Satellite is a scientific space mission carrying an astronomical telescope. The mission is led by the Weizmann Institute of Science in Israel and the Israel Space Agency, while the camera in the focal plane is designed and built by Deutsches Elektronen Synchrotron in Germany. Two key science goals of the mission are the detection of counterparts to gravitatio…
▽ More
The Ultraviolet Transient Astronomical Satellite is a scientific space mission carrying an astronomical telescope. The mission is led by the Weizmann Institute of Science in Israel and the Israel Space Agency, while the camera in the focal plane is designed and built by Deutsches Elektronen Synchrotron in Germany. Two key science goals of the mission are the detection of counterparts to gravitational wave sources and supernovae. The launch to geostationary orbit is planned for 2024. The telescope with a field-of-view of $\approx200$deg$^2$, is optimized to work in the near-ultraviolet band between $220$ and $280$nm. The focal plane array is composed of four $22.4$-megapixel, backside-illuminated CMOS sensors with a total active area of 90x90mm$^2$. Prior to sensor production, smaller test sensors have been tested to support critical design decisions for the final flight sensor. These test sensors share the design of epitaxial layer and anti-reflective coatings (ARC) with the flight sensors. Here, we present a characterization of these test sensors. Dark current and read noise are characterized as a function of the device temperature. A temperature-independent noise level is attributed to on-die infrared emission and the read-out electronics` self-heating. We utilize a high-precision photometric calibration setup to obtain the test sensors` quantum efficiency (QE) relative to PTB/NIST-calibrated transfer standards ($220$-$1100$nm), the quantum yield for $λ< 300$nm, the non-linearity of the system, and the conversion gain. The uncertainties are discussed in the context of the newest results on the setup`s performance parameters. From three ARC options, Tstd, T1 and T2, the latter optimizes out-of-band rejection and peaks in the mid of the ULTRASAT operational waveband (max. QE $\approx80\%$ at $245\mathrm{nm}$). We recommend ARC option T2 for the final ULTRASAT UV sensor.
△ Less
Submitted 5 August, 2021;
originally announced August 2021.
-
Design of the ULTRASAT UV camera
Authors:
Arooj Asif,
Merlin Barschke,
Benjamin Bastian-Querner,
David Berge,
Rolf Bühler,
Nicola De Simone,
Gianluca Giavitto,
Juan M. Haces Crespo,
Nirmal Kaipachery,
Marek Kowalski,
Shrinivasrao R. Kulkarni,
Daniel Küsters,
Sebastian Philipp,
Heike Prokoph,
Julian Schliwinski,
Mikhail Vasilev,
Jason J. Watson,
Steven Worm,
Francesco Zappon,
Shay Alfassi,
Sagi Ben-Ami,
Adi Birman,
Kasey Boggs,
Greg Bredthauer,
Amos Fenigstein
, et al. (12 additional authors not shown)
Abstract:
The Ultraviolet Transient Astronomical Satellite (ULTRASAT) is a scientific UV space telescope that will operate in geostationary orbit. The mission, targeted to launch in 2024, is led by the Weizmann Institute of Science (WIS) in Israel and the Israel Space Agency (ISA). Deutsches Elektronen Synchrotron (DESY) in Germany is tasked with the development of the UV-sensitive camera at the heart of th…
▽ More
The Ultraviolet Transient Astronomical Satellite (ULTRASAT) is a scientific UV space telescope that will operate in geostationary orbit. The mission, targeted to launch in 2024, is led by the Weizmann Institute of Science (WIS) in Israel and the Israel Space Agency (ISA). Deutsches Elektronen Synchrotron (DESY) in Germany is tasked with the development of the UV-sensitive camera at the heart of the telescope. The camera's total sensitive area of ~90mm x 90mm is built up by four back-side illuminated CMOS sensors, which image a field of view of ~200 deg2. Each sensor has 22.4 megapixels. The Schmidt design of the telescope locates the detector inside the optical path, limiting the overall size of the assembly. As a result, the readout electronics is located in a remote unit outside the telescope. The short focal length of the telescope requires an accurate positioning of the sensors within +-50 mu along the optical axis, with a flatness of +-10 mu. While the telescope will be at around 295K during operations, the sensors are required to be cooled to 200K for dark current reduction. At the same time, the ability to heat the sensors to 343K is required for decontamination. In this paper, we present the preliminary design of the UV sensitive ULTRASAT camera.
△ Less
Submitted 3 August, 2021;
originally announced August 2021.
-
Design and modeling of a tunable spatial heterodyne spectrometer for emission line studies
Authors:
Nirmal Kaipachery,
Sridharan Rengaswamy,
Sripadmanaban Sriram,
Jayant Murthy,
Suresh Ambily,
Margarita Safonova,
Aickara Gopinathan Sreejith,
Joice Mathew,
Mayuresh Sarpotdar
Abstract:
Spatial Heterodyne Spectroscopy (SHS) is a relatively novel interferometric technique similar to the Fourier transform spectroscopy with heritage from the Michelson Interferometer. An imaging detector is used at the output of a SHS to record the spatially-heterodyned interference pattern. The spectrum of the source is obtained by Fourier transforming the recorded interferogram. The merits of the S…
▽ More
Spatial Heterodyne Spectroscopy (SHS) is a relatively novel interferometric technique similar to the Fourier transform spectroscopy with heritage from the Michelson Interferometer. An imaging detector is used at the output of a SHS to record the spatially-heterodyned interference pattern. The spectrum of the source is obtained by Fourier transforming the recorded interferogram. The merits of the SHS -- its design, including the absence of moving parts, compactness, high throughput, high SNR and instantaneous spectral measurements -- make it suitable for space as well as for ground observatories. The small bandwidth limitation of the SHS can be overcome by building it in tunable configuration (Tunable Spatial Heterodyne Spectrometer, TSHS). In this paper, we describe the design, development and simulation of a TSHS in refractive configuration suitable for optical wavelength regime. Here we use a beam splitter to split the incoming light compared with all--reflective SHS where a reflective grating does the beam splitting. Hence the alignment of this instrument is simple compared with all--reflective SHS where a fold mirror and a roof mirror are used to combine the beam. This instrument is intended to study faint diffuse extended celestial objects with a resolving power above 20000, and can cover a wavelength range from 350 nm to 700 nm by tuning. It is compact and rugged compared with other instruments having similar configurations.
△ Less
Submitted 26 April, 2018; v1 submitted 25 April, 2018;
originally announced April 2018.