-
A Metastable Pentagonal 2D Material Synthesized by Symmetry-Driven Epitaxy
Authors:
Lina Liu,
Yujin Ji,
Marco Bianchi,
Saban M. Hus,
Zheshen Li,
Richard Balog,
Jill A. Miwa,
Philip Hofmann,
An-ping Li,
Dmitry Y. Zemlyanov,
Youyong Li,
Yong P. Chen
Abstract:
Most two-dimensional (2D) materials experimentally studied so far have hexagons as their building blocks. Only a few exceptions, such as PdSe2, are lower in energy in pentagonal phases and exhibit pentagons as building blocks. While theory has predicted a large number of pentagonal 2D materials, many of them are metastable and their experimental realization is difficult. Here we report the success…
▽ More
Most two-dimensional (2D) materials experimentally studied so far have hexagons as their building blocks. Only a few exceptions, such as PdSe2, are lower in energy in pentagonal phases and exhibit pentagons as building blocks. While theory has predicted a large number of pentagonal 2D materials, many of them are metastable and their experimental realization is difficult. Here we report the successful synthesis of a metastable pentagonal 2D material, the monolayer pentagonal PdTe2, by symmetry-driven epitaxy. Scanning tunneling microscopy and complementary spectroscopy measurements are used to characterize the monolayer pentagonal PdTe2, which demonstrates well-ordered low-symmetry atomic arrangements and is stabilized by lattice matching with the underlying Pd(100) substrate. Theoretical calculations, along with angle-resolved photoemission spectroscopy, reveal monolayer pentagonal PdTe2 is a semiconductor with an indirect bandgap of 1.05 eV. Our work opens an avenue for the synthesis of pentagon-based 2D materials and gives opportunities to explore their applications such as multifunctional nanoelectronics.
△ Less
Submitted 7 August, 2024;
originally announced August 2024.
-
Lifshitz Transition and Band Structure Evolution in Alkali Metal Intercalated 1Tprime-MoTe2
Authors:
Joohyung Park,
Ayan N. Batyrkhanov,
Jonas Brandhoff,
Marco Gruenewald,
Felix Otto,
Maximilian Schaal,
Saban Hus,
Torsten Fritz,
Florian Göltl,
An-Ping Li,
Oliver L. A. Monti
Abstract:
MoTe2 is a paradigmatic van der Waals layered semimetal with two energetically close electronic phases, the topologically trivial 1Tprime and the low-temperature Td type-II Weyl semimetal phase. The ability to manipulate this phase transition, perhaps towards occurring near room temperature, would open new avenues for harnessing the full potential of Weyl semimetals for high-efficiency electronic…
▽ More
MoTe2 is a paradigmatic van der Waals layered semimetal with two energetically close electronic phases, the topologically trivial 1Tprime and the low-temperature Td type-II Weyl semimetal phase. The ability to manipulate this phase transition, perhaps towards occurring near room temperature, would open new avenues for harnessing the full potential of Weyl semimetals for high-efficiency electronic and spintronic applications. Here, we show that potassium dosing on 1Tprime-MoTe2 induces a Lifshitz transition by a combination of angle-resolved photoemission spectroscopy, scanning tunneling microscopy, x-ray spectroscopy and density functional theory. While the electronic structure shifts rigidly for small concentrations of K, MoTe2 undergoes significant band structure renormalization for larger concentrations. Our results demonstrate that the origin of this electronic structure change stems from alkali metal intercalation. We show that these profound changes are caused by effectively decoupling the 2D sheets, bringing K-intercalated 1Tprime-MoTe2 to the quasi-2D limit, but do not cause a topological phase transition.
△ Less
Submitted 31 January, 2024; v1 submitted 23 December, 2023;
originally announced December 2023.
-
Autonomous convergence of STM control parameters using Bayesian Optimization
Authors:
Ganesh Narasimha,
Saban Hus,
Arpan Biswas,
Rama Vasudevan,
Maxim Ziatdinov
Abstract:
Scanning Tunneling microscopy (STM) is a widely used tool for atomic imaging of novel materials and its surface energetics. However, the optimization of the imaging conditions is a tedious process due to the extremely sensitive tip-surface interaction, and thus limits the throughput efficiency. Here we deploy a machine learning (ML) based framework to achieve optimal-atomically resolved imaging co…
▽ More
Scanning Tunneling microscopy (STM) is a widely used tool for atomic imaging of novel materials and its surface energetics. However, the optimization of the imaging conditions is a tedious process due to the extremely sensitive tip-surface interaction, and thus limits the throughput efficiency. Here we deploy a machine learning (ML) based framework to achieve optimal-atomically resolved imaging conditions in real time. The experimental workflow leverages Bayesian optimization (BO) method to rapidly improve the image quality, defined by the peak intensity in the Fourier space. The outcome of the BO prediction is incorporated into the microscope controls, i.e., the current setpoint and the tip bias, to dynamically improve the STM scan conditions. We present strategies to either selectively explore or exploit across the parameter space. As a result, suitable policies are developed for autonomous convergence of the control-parameters. The ML-based framework serves as a general workflow methodology across a wide range of materials.
△ Less
Submitted 26 October, 2023;
originally announced October 2023.
-
Emergence of a new band and the Lifshitz transition in kagome metal ScV$_6$Sn$_6$ with charge density wave
Authors:
Seoung-Hun Kang,
Haoxiang Li,
William R. Meier,
John W. Villanova,
Saban Hus,
Hoyeon Jeon,
Hasitha W. Suriya Arachchige,
Qiangsheng Lu,
Zheng Gai,
Jonathan Denlinger,
Rob Moore,
Mina Yoon,
David Mandrus
Abstract:
Topological kagome systems have been a topic of great interest in condensed matter physics due totheir unique electronic properties. The vanadium-based kagome materials are particularly intrigu-ing since they exhibit exotic phenomena such as charge density wave (CDW) and unconventionalsuperconductivity. The origin of these electronic instabilities is not fully understood, and the re-cent discovery…
▽ More
Topological kagome systems have been a topic of great interest in condensed matter physics due totheir unique electronic properties. The vanadium-based kagome materials are particularly intrigu-ing since they exhibit exotic phenomena such as charge density wave (CDW) and unconventionalsuperconductivity. The origin of these electronic instabilities is not fully understood, and the re-cent discovery of a charge density wave in ScV6Sn6provides a new avenue for investigation. In thiswork, we investigate the electronic structure of the novel kagome metal ScV6Sn6using angle resolvedphotoemission spectroscopy (ARPES), scanning tunneling microscopy (STM), and first-principlesdensity functional theory calculations. Our analysis reveals for the first time the temperature-dependent band changes of ScV6Sn6and identifies a new band that exhibits a strong signatureof a structure with CDW below the critical temperature. Further analysis revealed that this newband is due to the surface kagome layer of the CDW structure. In addition, a Lifshitz transition isidentified in the ARPES spectra that is related to the saddle point moving across the Fermi levelat the critical temperature for the CDW formation. This result shows the CDW behavior may alsobe related to nesting of the saddle point, similar to related materials. However, no energy gap is observed at the Fermi level and thus the CDW is not a typical Fermi surface nesting scenario. These results provide new insights into the underlying physics of the CDW in the kagome materials and could have implications for the development of materials with new functionality.
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Taming Atomic Defects for Quantum Functions
Authors:
Saban M. Hus,
An-Ping Li
Abstract:
Single atoms provide an ideal system for utilizing fundamental quantum functions. Their electrons have well-defined energy levels and spin properties. Even more importantly, for a given isotope -- say, $^{12}$C -- all the atoms are identical. This creates a perfect uniformity that is impossible to achieve in macroscopic-size quantum systems. However, herding individual atoms is a very difficult ta…
▽ More
Single atoms provide an ideal system for utilizing fundamental quantum functions. Their electrons have well-defined energy levels and spin properties. Even more importantly, for a given isotope -- say, $^{12}$C -- all the atoms are identical. This creates a perfect uniformity that is impossible to achieve in macroscopic-size quantum systems. However, herding individual atoms is a very difficult task that requires trapping them with magnetic or optical means and cooling them down to temperatures in the nanokelvin range. On the other hand, the counterpart of single atoms -- the single defects -- may be as good as atom-based quantum systems if not better. These defects, also referred as quantum defects, possess the favorable energy, spin, and uniformity properties of single atoms and remain in their place without the help of precisely tuned lasers. While the number of usable isotopes is set, the combinations of defects and their host material are practically limitless, giving us the flexibility to create precisely designed and controlled quantum systems. Furthermore, as we tame these defects for the quantum world, we bring about transformative opportunities to the classical world in forms such as ultradense electronic devices and precise manufacturing. In this research insight, we introduce some of our recent work on precisely controlled creation and manipulation of individual defects with a scanning tunneling microscope (STM). We also discuss possible pathways for utilizing these capabilities for the development of novel systems for Quantum Information Science (QIS) applications such as quantum information processing and ultrasensitive sensors.
△ Less
Submitted 22 September, 2022;
originally announced September 2022.
-
Single-defect Memristor in MoS$_2$ Atomic-layer
Authors:
Saban M. Hus,
Ruijing Ge,
Po-An Chen,
Meng-Hsueh Chiang,
Gavin E. Donnelly,
Wonhee Ko,
Fumin Huang,
Liangbo Liang,
An-Ping Li,
Deji Akinwande
Abstract:
Non-volatile resistive switching, also known as memristor effect in two terminal devices, has emerged as one of the most important components in the ongoing development of high-density information storage, brain-inspired computing, and reconfigurable systems. Recently, the unexpected discovery of memristor effect in atomic monolayers of transitional metal dichalcogenide sandwich structures has add…
▽ More
Non-volatile resistive switching, also known as memristor effect in two terminal devices, has emerged as one of the most important components in the ongoing development of high-density information storage, brain-inspired computing, and reconfigurable systems. Recently, the unexpected discovery of memristor effect in atomic monolayers of transitional metal dichalcogenide sandwich structures has added a new dimension of interest owing to the prospects of size scaling and the associated benefits. However, the origin of the switching mechanism in atomic sheets remains uncertain. Here, using monolayer MoS$_2$ as a model system, atomistic imaging and spectroscopy reveal that metal substitution into sulfur vacancy results in a non-volatile change in resistance. The experimental observations are corroborated by computational studies of defect structures and electronic states. These remarkable findings provide an atomistic understanding on the non-volatile switching mechanism and open a new direction in precision defect engineering, down to a single defect, for achieving optimum performance metrics including memory density, switching energy, speed, and reliability using atomic nanomaterials.
△ Less
Submitted 4 February, 2020;
originally announced February 2020.