-
Liquid-state polaron theory of the hydrated electron revisited
Authors:
James P. Donley,
David R. Heine,
Caleb A. Tormey,
David T. Wu
Abstract:
The quantum path integral/classical liquid-state theory of Chandler and co-workers, created to describe an excess electron in solvent, is re-examined for the hydrated electron. The portion that models electron-water density correlations is replaced by two equations: the range optimized random phase approximation (RO-RPA), and the DRL approximation to the "two-chain" equation, both shown previously…
▽ More
The quantum path integral/classical liquid-state theory of Chandler and co-workers, created to describe an excess electron in solvent, is re-examined for the hydrated electron. The portion that models electron-water density correlations is replaced by two equations: the range optimized random phase approximation (RO-RPA), and the DRL approximation to the "two-chain" equation, both shown previously to describe accurately the static structure and thermodynamics of strongly charged polyelectrolyte solutions. The static equilibrium properties of the hydrated electron are analyzed using five different electron-water pseudopotentials. The theory is then compared with data from mixed quantum/classical Monte Carlo and molecular dynamics simulations using these same pseudopotentials. It is found that the predictions of the RO-RPA and DRL-based polaron theories are similar and improve upon previous theory, with values for almost all properties analyzed in reasonable quantitative agreement with the available simulation data. Also, it is found using the Larsen, Glover and Schwartz pseudopotential that the theories give values for the solvation free energy that are at least three times larger than that from experiment.
△ Less
Submitted 24 December, 2014;
originally announced December 2014.
-
Effect of Particle Shape and Charge on Bulk Rheology of Nanoparticle Suspensions
Authors:
David R. Heine,
Matt K. Petersen,
Gary S. Grest
Abstract:
The rheology of nanoparticle suspensions for nanoparticles of various shapes with equal mass is studied using molecular dynamics simulations. The equilibrium structure and the response to imposed shear are analyzed for suspensions of spheres, rods, plates, and jacks in an explicit solvent for both charged and uncharged nanoparticles. For the volume fraction studied, ?$φ_{vf}=0.075$, the uncharged…
▽ More
The rheology of nanoparticle suspensions for nanoparticles of various shapes with equal mass is studied using molecular dynamics simulations. The equilibrium structure and the response to imposed shear are analyzed for suspensions of spheres, rods, plates, and jacks in an explicit solvent for both charged and uncharged nanoparticles. For the volume fraction studied, ?$φ_{vf}=0.075$, the uncharged systems are all in their isotropic phase and the viscosity is only weakly dependent on shape for spheres, rods, and plate whereas for the jacks the viscosity is an order of magnitude larger than for the other three shapes. The introduction of charge increases the viscosity for all four nanoparticle shapes with the increase being the largest for rods and plates. The presence of a repulsive charge between the particles decreases the amount of stress reduction that can be achieved by particle reorientation.
△ Less
Submitted 14 April, 2010;
originally announced April 2010.
-
A single atom detector integrated on an atom chip: fabrication, characterization and application
Authors:
D. Heine,
W. Rohringer,
D. Fischer,
M. Wilzbach,
T. Raub,
S. Loziczky,
XiYuan Liu,
S. Groth,
B. Hessmo,
J. Schmiedmayer
Abstract:
We describe a robust and reliable fluorescence detector for single atoms that is fully integrated into an atom chip. The detector allows spectrally and spatially selective detection of atoms, reaching a single atom detection efficiency of 66%. It consists of a tapered lensed single-mode fiber for precise delivery of excitation light and a multi-mode fiber to collect the fluorescence. The fibers…
▽ More
We describe a robust and reliable fluorescence detector for single atoms that is fully integrated into an atom chip. The detector allows spectrally and spatially selective detection of atoms, reaching a single atom detection efficiency of 66%. It consists of a tapered lensed single-mode fiber for precise delivery of excitation light and a multi-mode fiber to collect the fluorescence. The fibers are mounted in lithographically defined holding structures on the atom chip. Neutral 87Rb atoms propagating freely in a magnetic guide are detected and the noise of their fluorescence emission is analyzed. The variance of the photon distribution allows to determine the number of detected photons / atom and from there the atom detection efficiency. The second order intensity correlation function of the fluorescence shows near-perfect photon anti-bunching and signs of damped Rabi-oscillations. With simple improvements one can boost the detection efficiency to > 95%.
△ Less
Submitted 8 February, 2010;
originally announced February 2010.
-
An integrated atom detector: single atoms and photon statistics
Authors:
Dennis Heine,
Marco Wilzbach,
Thomas Raub,
Björn Hessmo,
Jörg Schmiedmayer
Abstract:
We demonstrate a robust fiber-optics-based fluorescence detector, fully integrated on an atom chip, which detects single atoms propagating in a guide with 66% efficiency. We characterize the detector performance and the atom flux by analyzing the photon statistics. Near-perfect photon antibunching proves that single atoms are detected, and allows us to study the second-order intensity correlatio…
▽ More
We demonstrate a robust fiber-optics-based fluorescence detector, fully integrated on an atom chip, which detects single atoms propagating in a guide with 66% efficiency. We characterize the detector performance and the atom flux by analyzing the photon statistics. Near-perfect photon antibunching proves that single atoms are detected, and allows us to study the second-order intensity correlation function of the fluorescence over three orders of magnitude in atomic density.
△ Less
Submitted 23 March, 2009;
originally announced March 2009.
-
A simple integrated single-atom detector
Authors:
Marco Wilzbach,
Dennis Heine,
Sönke Groth,
Xiyuan Liu,
Thomas Raub,
Björn Hessmo,
Jörg Schmiedmayer
Abstract:
We present a reliable and robust integrated fluorescence detector capable of detecting single atoms. The detector consists of a tapered lensed single-mode fiber for precise delivery of excitation light and a multimode fiber to collect the fluorescence. Both are mounted in lithographically defined SU-8 holding structures on an atom chip. Rb87 atoms propagating freely in a magnetic guide are detec…
▽ More
We present a reliable and robust integrated fluorescence detector capable of detecting single atoms. The detector consists of a tapered lensed single-mode fiber for precise delivery of excitation light and a multimode fiber to collect the fluorescence. Both are mounted in lithographically defined SU-8 holding structures on an atom chip. Rb87 atoms propagating freely in a magnetic guide are detected with an efficiency of up to 66%, and a signal-to-noise ratio in excess of 100 is obtained for short integration times.
△ Less
Submitted 12 March, 2009; v1 submitted 21 January, 2008;
originally announced January 2008.
-
Detecting Neutral Atoms on an Atom Chip
Authors:
M. Wilzbach,
A. Haase,
M. Schwarz,
D. Heine,
K. Wicker,
X. Liu,
K. -H. Brenner,
S. Groth,
Th. Fernholz,
B. Hessmo,
J. Schmiedmayer
Abstract:
Detecting single atoms (qubits) is a key requirement for implementing quantum information processing on an atom chip. The detector should ideally be integrated on the chip. Here we present and compare different methods capable of detecting neutral atoms on an atom chip. After a short introduction to fluorescence and absorption detection we discuss cavity enhanced detection of single atoms. In pa…
▽ More
Detecting single atoms (qubits) is a key requirement for implementing quantum information processing on an atom chip. The detector should ideally be integrated on the chip. Here we present and compare different methods capable of detecting neutral atoms on an atom chip. After a short introduction to fluorescence and absorption detection we discuss cavity enhanced detection of single atoms. In particular we concentrate on optical fiber based detectors such as fiber cavities and tapered fiber dipole traps. We discuss the various constraints in building such detectors in detail along with the current implementations on atom chips. Results from experimental tests of fiber integration are also described. In addition we present a pilot experiment for atom detection using a concentric cavity to verify the required scaling.
△ Less
Submitted 18 August, 2006;
originally announced August 2006.
-
Liquid Nanodroplets Spreading on Chemically Patterned Surfaces
Authors:
Gary S. Grest,
David R. Heine,
Edmund B. Webb III
Abstract:
Controlling the spatial distribution of liquid droplets on surfaces via surface energy patterning can be used to control material delivery to specified regions via selective liquid/solid wetting. While studies of the equilibrium shape of liquid droplets on heterogenous substrates exist, much less is known about the corresponding wetting kinetics. We make significant progress towards elucidating…
▽ More
Controlling the spatial distribution of liquid droplets on surfaces via surface energy patterning can be used to control material delivery to specified regions via selective liquid/solid wetting. While studies of the equilibrium shape of liquid droplets on heterogenous substrates exist, much less is known about the corresponding wetting kinetics. We make significant progress towards elucidating details of this topic by studying, via large-scale atomistic simulations, liquid nanodroplets spreading on chemically patterned surfaces. A model is presented for lines of polymer liquid (droplets) on substrates consisting of alternating strips of wetting (equilibrium contact angle approximately 0 degrees) and non-wetting (equilibrium contact angle approximately 90 degrees) material. Droplet spreading is compared for different wavelength of the pattern and strength of surface interaction on the wetting strips. For small wavelength, droplets partially spread on both the wetting and non-wetting regions of the substrate to attain a finite contact angle less than 90 degrees. In this case, the extent of spreading depends on the interaction strength in the wetting regions. A transition is observed such that, for large wavelength, the droplet spreads only on the wetting region of the substrate by pulling material from non-wetting regions. In most cases, a precursor film spreads on the wetting portion of the substrate at a rate strongly dependent upon interaction strength.
△ Less
Submitted 29 November, 2005;
originally announced November 2005.
-
Structure of strongly charged polyelectrolyte solutions
Authors:
James P. Donley,
David R. Heine
Abstract:
Molecular dynamics simulation and recent theory are used to examine density correlations in semidilute solutions of highly charged, intrinsically flexible and hydrophilic polyelectrolytes in low salt. Quantitative comparison with no adjustable parameters is made with recent scattering and osmometry experiments. Agreement is found for the polymer-polymer structure factor at intermediate wavevecto…
▽ More
Molecular dynamics simulation and recent theory are used to examine density correlations in semidilute solutions of highly charged, intrinsically flexible and hydrophilic polyelectrolytes in low salt. Quantitative comparison with no adjustable parameters is made with recent scattering and osmometry experiments. Agreement is found for the polymer-polymer structure factor at intermediate wavevectors q with varying chain charge fraction f. Theory is also in agreement with simulation and experiment for the osmotic pressure, but not with q -> 0 extrapolations of scattering data that show anomalously large intensities at low q.
△ Less
Submitted 12 December, 2006; v1 submitted 16 September, 2005;
originally announced September 2005.
-
Diverse Spreading Behavior of Binary Polymer Nanodroplets
Authors:
David R. Heine,
Gary S. Grest,
Edmund B. Webb III
Abstract:
Molecular dynamics simulations are used to study the spreading of binary polymer nanodroplets in a cylindrical geometry. The polymers, described by the bead-spring model, spread on a flat surface with a surface-coupled Langevin thermostat to mimic the effects of a corrugated surface. Each droplet consists of chains of length 10 or 100 monomers with ~350,000 monomers total. The qualitative featur…
▽ More
Molecular dynamics simulations are used to study the spreading of binary polymer nanodroplets in a cylindrical geometry. The polymers, described by the bead-spring model, spread on a flat surface with a surface-coupled Langevin thermostat to mimic the effects of a corrugated surface. Each droplet consists of chains of length 10 or 100 monomers with ~350,000 monomers total. The qualitative features of the spreading dynamics are presented for differences in chain length, surface interaction strength, and composition. When the components of the droplet differ only in surface interaction strength, the more strongly wetting component forms a monolayer film on the surface even when both materials are above or below the wetting transition. In the case where the only difference is the polymer chain length, the monolayer film beneath the droplet is composed of an equal amount of short chain and long chain monomers even when one component (the shorter chain length) is above the wetting transition and the other is not. The fraction of short and long chains in the precursor foot depends on whether or not both the short and long chains are in the wetting regime. Diluting the concentration of the strongly wetting component in a mixture with a weakly wetting component decreases the rate of diffusion of the wetting material to the surface and limits the spreading rate of the precursor foot, but the bulk spreading rate is not affected until the more strongly wetting component is removed completely.
△ Less
Submitted 19 January, 2005;
originally announced January 2005.
-
Surface Wetting of Liquid Nanodroplets
Authors:
David R. Heine,
Gary S. Grest,
Edmund B. Webb III
Abstract:
The spreading of liquid nanodroplets of different initial radii $R_{0}$ is studied using molecular dynamics simulation. Results for two distinct systems, Pb on Cu(111), which is non-wetting, and a coarse grained polymer model, which wets the surface, are presented for Pb droplets ranging in size from $\sim55 000$ to $220 000$ atoms and polymer droplets ranging in size from $\sim200 000$ to…
▽ More
The spreading of liquid nanodroplets of different initial radii $R_{0}$ is studied using molecular dynamics simulation. Results for two distinct systems, Pb on Cu(111), which is non-wetting, and a coarse grained polymer model, which wets the surface, are presented for Pb droplets ranging in size from $\sim55 000$ to $220 000$ atoms and polymer droplets ranging in size from $\sim200 000$ to $780 000$ monomers. In both cases, a precursor foot precedes the spreading of the main droplet. This precursor foot spreads as $r_{f}^{2}(t)=2D_{eff}t$ with an effective diffusion constant that exhibits a droplet size dependence $D_{eff}\sim R_{0}^{1/2}$. The radius of the main droplet $r_{b}(t)\sim R_{0}^{4/5}$ in agreement with kinetic models for the cylindrical geometry studied.
△ Less
Submitted 5 May, 2005; v1 submitted 8 October, 2004;
originally announced October 2004.
-
Spreading Dynamics of Polymer Nanodroplets in Cylindrical Geometries
Authors:
David R. Heine,
Gary S. Grest,
Edmund B. Webb III
Abstract:
The spreading of one- and two-component polymer nanodroplets is studied using molecular dynamics simulation in a cylindrical geometry. The droplets consist of polymer chains of length 10, 40, and 100 monomers per chain described by the bead-spring model spreading on a flat surface with a surface-coupled Langevin thermostat. Each droplet contains ~350,000 monomers. The dynamics of the individual…
▽ More
The spreading of one- and two-component polymer nanodroplets is studied using molecular dynamics simulation in a cylindrical geometry. The droplets consist of polymer chains of length 10, 40, and 100 monomers per chain described by the bead-spring model spreading on a flat surface with a surface-coupled Langevin thermostat. Each droplet contains ~350,000 monomers. The dynamics of the individual components of each droplet are analyzed and compared to the dynamics of single component droplets for the spreading rates of the precursor foot and bulk croplet, the time evolution of the contact angle, and the velocity distribution inside the droplet. We derive spreading models for the cylindrical geometry analogous to the kinetic and hydrodynamic models previously developed for the spherical geometry and show that hydrodynamic behavior is observed at earlier times for the cylindrical geometry. The contact radius is predicted to scale like r(t) t^1/5 from the kinetic model and r(t) t^1/7 for the hydrodynamic model in the cylindrical geometry.
△ Less
Submitted 6 April, 2004;
originally announced April 2004.
-
Spreading Dynamics of Polymer Nanodroplets
Authors:
David R. Heine,
Gary S. Grest,
Edmund B. Webb III
Abstract:
The spreading of polymer droplets is studied using molecular dynamics simulations. To study the dynamics of both the precursor foot and the bulk droplet, large drops of ~200,000 monomers are simulated using a bead-spring model for polymers of chain length 10, 20, and 40 monomers per chain. We compare spreading on flat and atomistic surfaces, chain length effects, and different applications of th…
▽ More
The spreading of polymer droplets is studied using molecular dynamics simulations. To study the dynamics of both the precursor foot and the bulk droplet, large drops of ~200,000 monomers are simulated using a bead-spring model for polymers of chain length 10, 20, and 40 monomers per chain. We compare spreading on flat and atomistic surfaces, chain length effects, and different applications of the Langevin and dissipative particle dynamics thermostats. We find diffusive behavior for the precursor foot and good agreement with the molecular kinetic model of droplet spreading using both flat and atomistic surfaces. Despite the large system size and long simulation time relative to previous simulations, we find no evidence of hydrodynamic behavior in the spreading droplet.
△ Less
Submitted 8 August, 2003;
originally announced August 2003.
-
Invariance of density correlations with charge density in polyelectrolyte solutions
Authors:
James P. Donley,
David R. Heine,
David T. Wu
Abstract:
We present a theory for the equilibrium structure of polyelectrolyte solutions. The main element is a simple, new optimization scheme that allows theories such as the random phase approximation (RPA) to handle the harsh repulsive forces present in such systems. Comparison is made with data from recent neutron scattering experiments of randomly charged, hydrophilic polymers in salt-free, semi-dil…
▽ More
We present a theory for the equilibrium structure of polyelectrolyte solutions. The main element is a simple, new optimization scheme that allows theories such as the random phase approximation (RPA) to handle the harsh repulsive forces present in such systems. Comparison is made with data from recent neutron scattering experiments of randomly charged, hydrophilic polymers in salt-free, semi-dilute solution at various charge densities. Models with varying degrees of realism are examined. The usual explanation of the invariance observed at high charge density has been counterion condensation. However, when polymer-polymer correlations are treated properly, we find that modeling polymer-counterion correlations at the level of Debye-Huckel theory is sufficient.
△ Less
Submitted 19 May, 2003; v1 submitted 19 May, 2003;
originally announced May 2003.
