-
Quantum Sensors for High Energy Physics
Authors:
Aaron Chou,
Kent Irwin,
Reina H. Maruyama,
Oliver K. Baker,
Chelsea Bartram,
Karl K. Berggren,
Gustavo Cancelo,
Daniel Carney,
Clarence L. Chang,
Hsiao-Mei Cho,
Maurice Garcia-Sciveres,
Peter W. Graham,
Salman Habib,
Roni Harnik,
J. G. E. Harris,
Scott A. Hertel,
David B. Hume,
Rakshya Khatiwada,
Timothy L. Kovachy,
Noah Kurinsky,
Steve K. Lamoreaux,
Konrad W. Lehnert,
David R. Leibrandt,
Dale Li,
Ben Loer
, et al. (17 additional authors not shown)
Abstract:
Strong motivation for investing in quantum sensing arises from the need to investigate phenomena that are very weakly coupled to the matter and fields well described by the Standard Model. These can be related to the problems of dark matter, dark sectors not necessarily related to dark matter (for example sterile neutrinos), dark energy and gravity, fundamental constants, and problems with the Sta…
▽ More
Strong motivation for investing in quantum sensing arises from the need to investigate phenomena that are very weakly coupled to the matter and fields well described by the Standard Model. These can be related to the problems of dark matter, dark sectors not necessarily related to dark matter (for example sterile neutrinos), dark energy and gravity, fundamental constants, and problems with the Standard Model itself including the Strong CP problem in QCD. Resulting experimental needs typically involve the measurement of very low energy impulses or low power periodic signals that are normally buried under large backgrounds. This report documents the findings of the 2023 Quantum Sensors for High Energy Physics workshop which identified enabling quantum information science technologies that could be utilized in future particle physics experiments, targeting high energy physics science goals.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
A proposal for detecting the spin of a single electron in superfluid helium
Authors:
Jinyong Ma,
Y. S. S. Patil,
Jiaxin Yu,
Yiqi Wang,
J. G. E. Harris
Abstract:
The electron bubble in superfluid helium has two degrees of freedom that may offer exceptionally low dissipation: the electron's spin and the bubble's motion. If these degrees of freedom can be read out and controlled with sufficient sensitivity, they would provide a novel platform for realizing a range of quantum technologies and for exploring open questions in the physics of superfluid helium. H…
▽ More
The electron bubble in superfluid helium has two degrees of freedom that may offer exceptionally low dissipation: the electron's spin and the bubble's motion. If these degrees of freedom can be read out and controlled with sufficient sensitivity, they would provide a novel platform for realizing a range of quantum technologies and for exploring open questions in the physics of superfluid helium. Here we propose a practical scheme for accomplishing this by trapping an electron bubble inside a superfluid-filled opto-acoustic cavity.
△ Less
Submitted 17 June, 2024; v1 submitted 14 August, 2023;
originally announced August 2023.
-
Resolving the topology of encircling multiple exceptional points
Authors:
Chitres Guria,
Qi Zhong,
Sahin K. Ozdemir,
Yogesh S. S. Patil,
Ramy El-Ganainy,
Jack G. E. Harris
Abstract:
Non-Hermiticity has emerged as a new paradigm for controlling coupled-mode systems in ways that cannot be achieved with conventional techniques. One aspect of this control that has received considerable attention recently is the encircling of exceptional points (EPs). To date, most work has focused on systems consisting of two modes that are tuned by two control parameters and have isolated EPs. W…
▽ More
Non-Hermiticity has emerged as a new paradigm for controlling coupled-mode systems in ways that cannot be achieved with conventional techniques. One aspect of this control that has received considerable attention recently is the encircling of exceptional points (EPs). To date, most work has focused on systems consisting of two modes that are tuned by two control parameters and have isolated EPs. While these systems exhibit exotic features related to EP encircling, it has been shown that richer behavior occurs in systems with more than two modes. Such systems can be tuned by more than two control parameters, and contain EPs that form a knot-like structure. Control loops that encircle this structure cause the system's eigenvalues to trace out non-commutative braids. Here we consider a hybrid scenario: a three-mode system with just two control parameters. We describe the relationship between control loops and their topology in the full and two-dimensional parameter space. We demonstrate this relationship experimentally using a three-mode mechanical system in which the control parameters are provided by optomechanical interaction with a high-finesse optical cavity.
△ Less
Submitted 16 February, 2024; v1 submitted 6 April, 2023;
originally announced April 2023.
-
Measuring High-Order Phonon Correlations in an Optomechanical Resonator
Authors:
Yogesh S. S. Patil,
Jiaxin Yu,
Sean Frazier,
Yiqi Wang,
Kale Johnson,
Jared Fox,
Jakob Reichel,
Jack G. E. Harris
Abstract:
We use single photon detectors to probe the motional state of a superfluid $^4$He resonator of mass $\sim1$ ng. The arrival times of Stokes and anti-Stokes photons (scattered by the resonator's acoustic mode) are used to measure the resonator's phonon coherences up to the fourth order. By post-selecting on photon detection events, we also measure coherences in the resonator when $\leq3$ phonons ha…
▽ More
We use single photon detectors to probe the motional state of a superfluid $^4$He resonator of mass $\sim1$ ng. The arrival times of Stokes and anti-Stokes photons (scattered by the resonator's acoustic mode) are used to measure the resonator's phonon coherences up to the fourth order. By post-selecting on photon detection events, we also measure coherences in the resonator when $\leq3$ phonons have been added or subtracted. These measurements are found to be consistent with predictions that assume the acoustic mode to be in thermal equilibrium with a bath through a Markovian coupling.
△ Less
Submitted 18 January, 2022;
originally announced January 2022.
-
Measuring the knot of non-Hermitian degeneracies and non-commuting braids
Authors:
Yogesh S. S. Patil,
Judith Höller,
Parker A. Henry,
Chitres Guria,
Yiming Zhang,
Luyao Jiang,
Nenad Kralj,
Nicholas Read,
Jack G. E. Harris
Abstract:
Any system of coupled oscillators may be characterized by its spectrum of resonance frequencies (or eigenfrequencies), which can be tuned by varying the system's parameters. The relationship between control parameters and the eigenfrequency spectrum is central to a range of applications. However, fundamental aspects of this relationship remain poorly understood. For example, if the controls are va…
▽ More
Any system of coupled oscillators may be characterized by its spectrum of resonance frequencies (or eigenfrequencies), which can be tuned by varying the system's parameters. The relationship between control parameters and the eigenfrequency spectrum is central to a range of applications. However, fundamental aspects of this relationship remain poorly understood. For example, if the controls are varied along a path that returns to its starting point (i.e., around a "loop"), the system's spectrum must return to itself. In systems that are Hermitian (i.e., lossless and reciprocal) this process is trivial, and each resonance frequency returns to its original value. However, in non-Hermitian systems, where the eigenfrequencies are complex, the spectrum may return to itself in a topologically non-trivial manner, a phenomenon known as spectral flow. The spectral flow is determined by how the control loop encircles degeneracies, and this relationship is well understood for $N=2$ (where $N$ is the number of oscillators in the system). Here we extend this description to arbitrary $N$. We show that control loops generically produce braids of eigenfrequencies, and for $N>2$ these braids form a non-Abelian group which reflects the non-trivial geometry of the space of degeneracies. We demonstrate these features experimentally for $N=3$ using a cavity optomechanical system.
△ Less
Submitted 15 July, 2022; v1 submitted 30 November, 2021;
originally announced December 2021.
-
Superfluid Helium Drops Levitated in High Vacuum
Authors:
C. D. Brown,
Y. Wang,
M. Namazi,
G. I. Harris,
M. T. Uysal,
J. G. E. Harris
Abstract:
We demonstrate the trapping of millimeter-scale superfluid Helium drops in high vacuum. The drops are sufficiently isolated that they remain trapped indefinitely, cool by evaporation to 330 mK, and exhibit mechanical damping that is limited by internal processes. The drops are also shown to host optical whispering gallery modes. The approach described here combines the advantages of multiple techn…
▽ More
We demonstrate the trapping of millimeter-scale superfluid Helium drops in high vacuum. The drops are sufficiently isolated that they remain trapped indefinitely, cool by evaporation to 330 mK, and exhibit mechanical damping that is limited by internal processes. The drops are also shown to host optical whispering gallery modes. The approach described here combines the advantages of multiple techniques, and should offer access to new experimental regimes of cold chemistry, superfluid physics, and optomechanics.
△ Less
Submitted 31 January, 2023; v1 submitted 12 September, 2021;
originally announced September 2021.
-
Nonclassical photon statistics in two-tone continuously driven optomechanics
Authors:
K. Borkje,
F. Massel,
J. G. E. Harris
Abstract:
In cavity optomechanics, single photon detection of Raman scattered photons can be a useful tool for observing nonclassical features of both radiation and motion. While this tool has been employed in experiments with pulsed laser driving of a cavity mode, it has not been readily accessible to experiments with continuous and constant laser driving. To address this, we present a study of a standard…
▽ More
In cavity optomechanics, single photon detection of Raman scattered photons can be a useful tool for observing nonclassical features of both radiation and motion. While this tool has been employed in experiments with pulsed laser driving of a cavity mode, it has not been readily accessible to experiments with continuous and constant laser driving. To address this, we present a study of a standard optomechanical system where the cavity mode is continuously driven at two different frequencies, and where sideband photons are detected by single photon detectors after frequency filtering the output from the cavity mode around its resonance frequency. We first derive the normalized second order coherence associated with the detected photons, and show that it contains signatures of the quantum nature of the mechanical mode which would be absent with only single-tone driving. To identify model-independent nonclassical features, we derive two inequalities for the sideband photon statistics that should be valid in any classical model of the system. We show that these inequalities are violated in the proposed setup. This is provided that the average phonon occupation number of the mechanical mode is sufficiently small, which in principle can be achieved through sideband cooling intrinsic to the setup. Violation of the first inequality means that there is no well-defined probability distribution of the Glauber-Sudarshan type for the cavity mode. In contrast, a violation of the second inequality means that there is no joint probability distribution for the cavity mode at two times separated by a finite interval, which originates from the noncommutativity of the motional quadratures of the mechanical mode. The proposed setup thus employs a mechanical oscillator in order to generate a steady-state source of nonclassical radiation.
△ Less
Submitted 8 December, 2021; v1 submitted 24 August, 2021;
originally announced August 2021.
-
Mechanical Quantum Sensing in the Search for Dark Matter
Authors:
Daniel Carney,
Gordan Krnjaic,
David C. Moore,
Cindy A. Regal,
Gadi Afek,
Sunil Bhave,
Benjamin Brubaker,
Thomas Corbitt,
Jonathan Cripe,
Nicole Crisosto,
Andrew Geraci,
Sohitri Ghosh,
Jack G. E. Harris,
Anson Hook,
Edward W. Kolb,
Jonathan Kunjummen,
Rafael F. Lang,
Tongcang Li,
Tongyan Lin,
Zhen Liu,
Joseph Lykken,
Lorenzo Magrini,
Jack Manley,
Nobuyuki Matsumoto,
Alissa Monte
, et al. (10 additional authors not shown)
Abstract:
Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mecha…
▽ More
Numerous astrophysical and cosmological observations are best explained by the existence of dark matter, a mass density which interacts only very weakly with visible, baryonic matter. Searching for the extremely weak signals produced by this dark matter strongly motivate the development of new, ultra-sensitive detector technologies. Paradigmatic advances in the control and readout of massive mechanical systems, in both the classical and quantum regimes, have enabled unprecedented levels of sensitivity. In this white paper, we outline recent ideas in the potential use of a range of solid-state mechanical sensing technologies to aid in the search for dark matter in a number of energy scales and with a variety of coupling mechanisms.
△ Less
Submitted 13 August, 2020;
originally announced August 2020.
-
Phase slip statistics of a single isolated flux-biased superconducting ring
Authors:
I. Petkovic,
A. Lollo,
J. G. E. Harris
Abstract:
We describe measurements of the thermally-activated transitions between fluxoid states of a single isolated superconducting ring. We compare these measurements with theoretical predictions in which all of the relevant parameters are determined via independent characterization of the same ring. This no-free-parameters comparison shows qualitative agreement over a wide range of temperatures. We disc…
▽ More
We describe measurements of the thermally-activated transitions between fluxoid states of a single isolated superconducting ring. We compare these measurements with theoretical predictions in which all of the relevant parameters are determined via independent characterization of the same ring. This no-free-parameters comparison shows qualitative agreement over a wide range of temperatures. We discuss possible origins for the remaining discrepancies between the data and theory, in particular the choice of model for the superconducting order parameter's damping.
△ Less
Submitted 12 August, 2020; v1 submitted 27 October, 2019;
originally announced October 2019.
-
Non-Hermitian adiabatic transport in spaces of exceptional points
Authors:
J. Höller,
N. Read,
J. G. E. Harris
Abstract:
We consider the space of $n \times n$ non-Hermitian Hamiltonians ($n=2$, $3$, . . .) that are equivalent to a single $n\times n$ Jordan block. We focus on adiabatic transport around a closed path (i.e. a loop) within this space, in the limit as the time-scale $T=1/\varepsilon$ taken to traverse the loop tends to infinity. We show that, for a certain class of loops and a choice of initial state, th…
▽ More
We consider the space of $n \times n$ non-Hermitian Hamiltonians ($n=2$, $3$, . . .) that are equivalent to a single $n\times n$ Jordan block. We focus on adiabatic transport around a closed path (i.e. a loop) within this space, in the limit as the time-scale $T=1/\varepsilon$ taken to traverse the loop tends to infinity. We show that, for a certain class of loops and a choice of initial state, the state returns to itself and acquires a complex phase that is $\varepsilon^{-1}$ times an expansion in powers of $\varepsilon^{1/n}$. The exponential of the term of $n$th order (which is equivalent to the "geometric" or Berry phase modulo $2π$), is thus independent of $\varepsilon$ as $\varepsilon\to0$; it depends only on the homotopy class of the loop and is an integer power of $e^{2πi/n}$. One of the conditions under which these results hold is that the state being transported is, for all points on the loop, that of slowest decay.
△ Less
Submitted 16 September, 2020; v1 submitted 14 September, 2018;
originally announced September 2018.
-
High-frequency cavity optomechanics using bulk acoustic phonons
Authors:
Prashanta Kharel,
Glen I. Harris,
Eric A. Kittlaus,
William H. Renninger,
Nils T. Otterstrom,
Jack G. E. Harris,
Peter T. Rakich
Abstract:
To date, micro- and nano-scale optomechanical systems have enabled many proof-of-principle quantum operations through access to high-frequency (GHz) phonon modes that are readily cooled to their thermal ground state. However, minuscule amounts of absorbed light produce excessive heating that can jeopardize robust ground state operation within such microstructures. In contrast, we demonstrate an al…
▽ More
To date, micro- and nano-scale optomechanical systems have enabled many proof-of-principle quantum operations through access to high-frequency (GHz) phonon modes that are readily cooled to their thermal ground state. However, minuscule amounts of absorbed light produce excessive heating that can jeopardize robust ground state operation within such microstructures. In contrast, we demonstrate an alternative strategy for accessing high-frequency ($13$ GHz) phonons within macroscopic systems (cm-scale). Counterintuitively, we show that these macroscopic systems, with motional masses that are $>20$ million times larger than those of micro-scale counterparts, offer a complementary path towards robust quantum operations. Utilizing bulk acoustic phonons to mediate resonant coupling between two distinct modes of an optical cavity, we demonstrate the ability to perform beam-splitter and entanglement operations at MHz rates on an array of phonon modes, opening doors to applications ranging from quantum memories and microwave-to-optical conversion to high-power laser oscillators.
△ Less
Submitted 20 August, 2018;
originally announced September 2018.
-
Perturbation theory of optical resonances of deformed dielectric spheres
Authors:
Andrea Aiello,
Jack G. E. Harris,
Florian Marquardt
Abstract:
We analyze the optical resonances of a dielectric sphere whose surface has been slightly deformed in an arbitrary way. Setting up a perturbation series up to second order, we derive both the frequency shifts and modified linewidths. Our theory is applicable, for example, to freely levitated liquid drops or solid spheres, which are deformed by thermal surface vibrations, centrifugal forces or arbit…
▽ More
We analyze the optical resonances of a dielectric sphere whose surface has been slightly deformed in an arbitrary way. Setting up a perturbation series up to second order, we derive both the frequency shifts and modified linewidths. Our theory is applicable, for example, to freely levitated liquid drops or solid spheres, which are deformed by thermal surface vibrations, centrifugal forces or arbitrary surface waves. A dielectric sphere is effectively an open system whose description requires the introduction of non-Hermitian operators characterized by complex eigenvalues and not normalizable eigenfunctions. We avoid these difficulties using the Kapur-Peierls formalism which enables us to extend the popular Rayleigh-Schrödinger perturbation theory to the case of electromagnetic Debye's potentials describing the light fields inside and outside the near-spherical dielectric object. We find analytical formulas, valid within certain limits, for the deformation-induced first- and second-order corrections to the central frequency and bandwidth of a resonance. As an application of our method, we compare our results with preexisting ones finding full agreement.
△ Less
Submitted 25 January, 2019; v1 submitted 7 September, 2018;
originally announced September 2018.
-
Nonreciprocal control and cooling of phonon modes in an optomechanical system
Authors:
H. Xu,
Luyao Jiang,
A. A. Clerk,
J. G. E. Harris
Abstract:
Phononic resonators play important roles in settings that range from gravitational wave detectors to cellular telephones. They serve as high-performance transducers, sensors, and filters by offering low dissipation, tunable coupling to diverse physical systems, and compatibility with a wide range of frequencies, materials, and fabrication processes. Systems of phononic resonators typically obey re…
▽ More
Phononic resonators play important roles in settings that range from gravitational wave detectors to cellular telephones. They serve as high-performance transducers, sensors, and filters by offering low dissipation, tunable coupling to diverse physical systems, and compatibility with a wide range of frequencies, materials, and fabrication processes. Systems of phononic resonators typically obey reciprocity, which ensures that the phonon transmission coefficient between any two resonators is independent of the direction of transmission. Reciprocity must be broken to realize devices (such as isolators and circulators) that provide one-way propagation of acoustic energy between resonators. Such devices are crucial for protecting active elements, mitigating noise, and operating full-duplex transceivers. To date, nonreciprocal phononic devices have not combined the features necessary for robust operation: strong nonreciprocity, in situ tunability, compact integration, and continuous operation. Furthermore, they have been applied only to coherent signals (rather than fluctuations or noise), and have been realized exclusively in travelling-wave systems (rather than resonators). Here we describe a cavity optomechanical scheme that produces robust nonreciprocal coupling between phononic resonators. This scheme provides ~ 30 dB of isolation and can be tuned in situ simply via the phases of the drive tones applied to the cavity. In addition, by directly monitoring the resonators' dynamics we show that this nonreciprocity can be used to control thermal fluctuations, and that this control represents a new resource for cooling phononic resonators.
△ Less
Submitted 10 July, 2018;
originally announced July 2018.
-
Quantum optomechanics in a liquid
Authors:
A. B. Shkarin,
A. D. Kashkanova,
C. D. Brown,
S. Garcia,
K. Ott,
J. Reichel,
J. G. E. Harris
Abstract:
Optomechanical systems provide a means for studying and controlling quantum effects in the motion of macroscopic objects. To date, quantum optomechanical effects have been studied in objects made from solids and gases. Here we describe measurements of quantum behavior in the vibrations of a liquid body. Specifically, we monitor the fluctuations of an individual acoustic standing wave in superfluid…
▽ More
Optomechanical systems provide a means for studying and controlling quantum effects in the motion of macroscopic objects. To date, quantum optomechanical effects have been studied in objects made from solids and gases. Here we describe measurements of quantum behavior in the vibrations of a liquid body. Specifically, we monitor the fluctuations of an individual acoustic standing wave in superfluid liquid helium, and find that it displays the characteristic signatures of zero-point motion and measurement back-action. This opens the possibility of exploiting the properties of liquids in general (and superfluid helium in particular) to access qualitatively new regimes of quantum optomechanics.
△ Less
Submitted 8 September, 2017;
originally announced September 2017.
-
Cavity Optomechanics in a Levitated Helium Drop
Authors:
L. Childress,
M. P. Schmidt,
A. D. Kashkanova,
C. D. Brown,
G. I. Harris,
A. Aiello,
F. Marquardt,
J. G. E. Harris
Abstract:
We describe a proposal for a new type of optomechanical system based on a drop of liquid helium that is magnetically levitated in vacuum. In the proposed device, the drop would serve three roles: its optical whispering gallery modes would provide the optical cavity, its surface vibrations would constitute the mechanical element, and evaporation of He atoms from its surface would provide continuous…
▽ More
We describe a proposal for a new type of optomechanical system based on a drop of liquid helium that is magnetically levitated in vacuum. In the proposed device, the drop would serve three roles: its optical whispering gallery modes would provide the optical cavity, its surface vibrations would constitute the mechanical element, and evaporation of He atoms from its surface would provide continuous refrigeration. We analyze the feasibility of such a system in light of previous experimental demonstrations of its essential components: magnetic levitation of mm-scale and cm-scale drops of liquid He, evaporative cooling of He droplets in vacuum, and coupling to high-quality optical whispering gallery modes in a wide range of liquids. We find that the combination of these features could result in a device that approaches the single-photon strong coupling regime, due to the high optical quality factors attainable at low temperatures. Moreover, the system offers a unique opportunity to use optical techniques to study the motion of a superfluid that is freely levitating in vacuum (in the case of $^{4}\mathrm {He}$). Alternatively, for a normal fluid drop of $^3 \mathrm{He}$, we propose to exploit the coupling between the drop's rotations and vibrations to perform quantum non-demolition measurements of angular momentum.
△ Less
Submitted 5 August, 2017;
originally announced August 2017.
-
Topological dynamics in an optomechanical system with highly non-degenerate modes
Authors:
H. Xu,
D. Mason,
Luyao Jiang,
J. G. E. Harris
Abstract:
Non-Hermitian systems exhibit phenomena that are qualitatively different from those of Hermitian systems and have been exploited to achieve a number of ends, including the generation of exceptional points, nonreciprocal dynamics, non-orthogonal normal modes, and topological operations. However to date these effects have only been accessible with nearly-degenerate modes (i.e., modes with frequency…
▽ More
Non-Hermitian systems exhibit phenomena that are qualitatively different from those of Hermitian systems and have been exploited to achieve a number of ends, including the generation of exceptional points, nonreciprocal dynamics, non-orthogonal normal modes, and topological operations. However to date these effects have only been accessible with nearly-degenerate modes (i.e., modes with frequency difference comparable to their linewidth and coupling rate). Here we demonstrate an optomechanical scheme that extends topological control to highly non-degenerate modes of a non-Hermitian system. Specifically, we induce a "virtual exceptional point" between two mechanical modes whose frequencies differ by >10^3 times their linewidth and coupling rate, and use adiabatic topological operations to transfer energy between these modes. This scheme can be readily implemented in many physical systems, potentially extending the utility of non-Hermitian dynamics to a much wider range of settings.
△ Less
Submitted 21 March, 2017;
originally announced March 2017.
-
Photothermal optomechanics in superfluid helium coupled to a fiber-based cavity
Authors:
A. D. Kashkanova,
A. B. Shkarin,
C. D. Brown,
N. E. Flowers-Jacobs,
L. Childress,
S. W. Hoch,
L. Hohmann,
K. Ott,
J. Reichel,
J. G. E. Harris
Abstract:
Presented in this paper are measurements of an optomechanical device in which various acoustic modes of a sample of superfluid helium couple to a fiber-based optical cavity. In contrast with recent work on the paraxial acoustic mode confined by the cavity mirrors, we focus specifically on the acoustic modes associated with the helium surrounding the cavity. This paper provides a framework for unde…
▽ More
Presented in this paper are measurements of an optomechanical device in which various acoustic modes of a sample of superfluid helium couple to a fiber-based optical cavity. In contrast with recent work on the paraxial acoustic mode confined by the cavity mirrors, we focus specifically on the acoustic modes associated with the helium surrounding the cavity. This paper provides a framework for understanding how the acoustic modes depend on device geometry. The acoustic modes are observed using the technique of optomechanically induced transparency/amplification. The optomechanical coupling to these modes is found to be predominantly photothermal.
△ Less
Submitted 23 September, 2016; v1 submitted 22 September, 2016;
originally announced September 2016.
-
Topological energy transfer in an optomechanical system with exceptional points
Authors:
H. Xu,
D. Mason,
L. Jiang,
J. G. E. Harris
Abstract:
Topological operations have the merit of achieving certain goals without requiring accurate control over local operational details. To date, topological operations have been used to control geometric phases, and have been proposed as a means for controlling the state of certain systems within their degenerate subspaces[1-8]. More recently, it was predicted that topological operations can be extend…
▽ More
Topological operations have the merit of achieving certain goals without requiring accurate control over local operational details. To date, topological operations have been used to control geometric phases, and have been proposed as a means for controlling the state of certain systems within their degenerate subspaces[1-8]. More recently, it was predicted that topological operations can be extended to transfer energy between normal modes, provided that the system possesses a specific type of degeneracy known as an exceptional point (EP)[9-11]. Here we demonstrate the transfer of energy between two modes of a cryogenic optomechanical device by topological operations. We show that this transfer arises from the presence of an EP in the device's spectrum. We also show that this transfer is non-reciprocal[12-14]. These results open new directions in system control; they also open the possibility of exploring other dynamical effects related to EPs[15,16], as well as the behavior of thermal and quantum fluctuations in the vicinity of EPs.
△ Less
Submitted 28 March, 2016; v1 submitted 22 February, 2016;
originally announced February 2016.
-
Superfluid Brillouin Optomechanics
Authors:
A. D. Kashkanova,
A. B. Shkarin,
C. D. Brown,
N. E. Flowers-Jacobs,
L. Childress,
S. W. Hoch,
L. Hohmann,
K. Ott,
J. Reichel,
J. G. E. Harris
Abstract:
Optomechanical systems couple an electromagnetic cavity to a mechanical resonator which is typically formed from a solid object. The range of phenomena accessible to these systems depends on the properties of the mechanical resonator and on the manner in which it couples to the cavity fields. In both respects, a mechanical resonator formed from superfluid liquid helium offers several appealing fea…
▽ More
Optomechanical systems couple an electromagnetic cavity to a mechanical resonator which is typically formed from a solid object. The range of phenomena accessible to these systems depends on the properties of the mechanical resonator and on the manner in which it couples to the cavity fields. In both respects, a mechanical resonator formed from superfluid liquid helium offers several appealing features: low electromagnetic absorption, high thermal conductivity, vanishing viscosity, well-understood mechanical loss, and in situ alignment with cryogenic cavities. In addition, it offers degrees of freedom that differ qualitatively from those of a solid. Here, we describe an optomechanical system consisting of a miniature optical cavity filled with superfluid helium. The cavity mirrors define optical and mechanical modes with near-perfect overlap, resulting in an optomechanical coupling rate ~3 kHz. This coupling is used to drive the superfluid; it is also used to observe the superfluid's thermal motion, resolving a mean phonon number as low as 11.
△ Less
Submitted 17 February, 2016;
originally announced February 2016.
-
Deterministic phase slips in mesoscopic superconducting rings
Authors:
I. Petkovic,
A. Lollo,
L. I. Glazman,
J. G. E. Harris
Abstract:
The properties of one-dimensional superconductors are strongly influenced by topological fluctuations of the order parameter, known as phase slips, which cause the decay of persistent current in superconducting rings and the appearance of resistance in superconducting wires. Despite extensive work, quantitative studies of phase slips have been limited by uncertainty regarding the order parameter's…
▽ More
The properties of one-dimensional superconductors are strongly influenced by topological fluctuations of the order parameter, known as phase slips, which cause the decay of persistent current in superconducting rings and the appearance of resistance in superconducting wires. Despite extensive work, quantitative studies of phase slips have been limited by uncertainty regarding the order parameter's free energy landscape. Here we show detailed agreement between measurements of the persistent current in isolated flux-biased rings and Ginzburg-Landau theory over a wide range of temperature, magnetic field, and ring size; this agreement provides a quantitative picture of the free energy landscape. We also demonstrate that phase slips occur deterministically as the barrier separating two competing order parameter configurations vanishes. These results will enable studies of quantum and thermal phase slips in a well-characterized system and will provide access to outstanding questions regarding the nature of one-dimensional superconductivity.
△ Less
Submitted 29 October, 2016; v1 submitted 11 January, 2016;
originally announced January 2016.
-
Measurement of the motional sidebands of a nanogram-scale oscillator in the quantum regime
Authors:
M. Underwood,
D. Mason,
D. Lee,
H. Xu,
L. Jiang,
A. B. Shkarin,
K. Børkje,
S. M. Girvin,
J. G. E. Harris
Abstract:
We describe measurements of the motional sidebands produced by a mechanical oscillator (with effective mass 43 ng and resonant frequency 705 kHz) that is placed in an optical cavity and cooled close to its quantum ground state. The red and blue sidebands (corresponding to Stokes and anti-Stokes scattering) from a single laser beam are recorded simultaneously via a heterodyne measurement. The oscil…
▽ More
We describe measurements of the motional sidebands produced by a mechanical oscillator (with effective mass 43 ng and resonant frequency 705 kHz) that is placed in an optical cavity and cooled close to its quantum ground state. The red and blue sidebands (corresponding to Stokes and anti-Stokes scattering) from a single laser beam are recorded simultaneously via a heterodyne measurement. The oscillator's mean phonon number n is inferred from the ratio of the sidebands, and reaches a minimum value of 0.84 +- 0.22 (corresponding to a mode temperature T = 28 +- 7 microK). We also infer n from the calibrated area of each of the two sidebands, and from the oscillator's total damping. The values of n inferred from these four methods are in close agreement. The behavior of the sidebands as a function of the oscillator's temperature agrees well with theory that includes the quantum fluctuations of both the cavity field and the mechanical oscillator.
△ Less
Submitted 14 September, 2015; v1 submitted 27 June, 2014;
originally announced June 2014.
-
Fabrication and characterization of large arrays of mesoscopic gold rings on large-aspect-ratio cantilevers
Authors:
D. Q. Ngo,
I. Petkovic,
A. Lollo,
M. A. Castellanos-Beltran,
J. G. E. Harris
Abstract:
We have fabricated large arrays of mesoscopic metal rings on ultrasensitive cantilevers. The arrays are defined by electron beam lithography and contain up to $10^5$ rings. The rings have a circumference of 1 $μ$m, and are made of ultrapure (6N) Au that is deposited onto a silicon-on-insulator wafer without an adhesion layer. Subsequent processing of the SOI wafer results in each array being suppo…
▽ More
We have fabricated large arrays of mesoscopic metal rings on ultrasensitive cantilevers. The arrays are defined by electron beam lithography and contain up to $10^5$ rings. The rings have a circumference of 1 $μ$m, and are made of ultrapure (6N) Au that is deposited onto a silicon-on-insulator wafer without an adhesion layer. Subsequent processing of the SOI wafer results in each array being supported at the end of a free-standing cantilever. To accommodate the large arrays while maintaining a low spring constant, the cantilevers are nearly 1 mm in both lateral dimensions and 100 nm thick. The extreme aspect ratio of the cantilevers, the large array size, and the absence of a sticking layer are intended to enable measurements of the rings' average persistent current $\langle I \rangle$ in the presence of relatively small magnetic fields. We describe the motivation for these measurements, the fabrication of the devices, and the characterization of the cantilevers' mechanical properties. We also discuss the devices' expected performance in measurements of $\langle I \rangle$.
△ Less
Submitted 13 August, 2014; v1 submitted 9 June, 2014;
originally announced June 2014.
-
Multimode optomechanical dynamics in a cavity with avoided crossings
Authors:
D. Lee,
M. Underwood,
D. Mason,
A. B. Shkarin,
S. W. Hoch,
J. G. E. Harris
Abstract:
Cavity optomechanics offers powerful methods for controlling optical fields and mechanical motion. A number of proposals have predicted that this control can be extended considerably in devices where multiple cavity modes couple to each other via the motion of a single mechanical oscillator. Here we study the dynamical properties of such a multimode optomechanical device, in which the coupling bet…
▽ More
Cavity optomechanics offers powerful methods for controlling optical fields and mechanical motion. A number of proposals have predicted that this control can be extended considerably in devices where multiple cavity modes couple to each other via the motion of a single mechanical oscillator. Here we study the dynamical properties of such a multimode optomechanical device, in which the coupling between cavity modes results from mechanically-induced avoided crossings in the cavity's spectrum. Near the avoided crossings we find that the optical spring shows distinct features that arise from the interaction between cavity modes. Precisely at an avoided crossing, we show that the particular form of the optical spring provides a classical analog of a quantum-nondemolition measurement of the intracavity photon number. The mechanical oscillator's Brownian motion, an important source of noise in these measurements, is minimized by operating the device at cryogenic temperature (500 mK).
△ Less
Submitted 10 September, 2014; v1 submitted 13 January, 2014;
originally announced January 2014.
-
Optically Mediated Hybridization Between Two Mechanical Modes
Authors:
A. B. Shkarin,
N. E. Flowers-Jacobs,
S. W. Hoch,
A. D. Kashkanova,
C. Deutsch,
J. Reichel,
J. G. E. Harris
Abstract:
In this paper we study a system consisting of two nearly degenerate mechanical modes that couple to a single mode of an optical cavity. We show that this coupling leads to nearly complete (99.5%) hybridization of the two mechanical modes into a bright mode that experiences strong optomechanical interactions and a dark mode that experiences almost no optomechanical interactions. We use this hybridi…
▽ More
In this paper we study a system consisting of two nearly degenerate mechanical modes that couple to a single mode of an optical cavity. We show that this coupling leads to nearly complete (99.5%) hybridization of the two mechanical modes into a bright mode that experiences strong optomechanical interactions and a dark mode that experiences almost no optomechanical interactions. We use this hybridization to transfer energy between the mechanical modes with 40% efficiency.
△ Less
Submitted 4 December, 2013; v1 submitted 3 June, 2013;
originally announced June 2013.
-
Cryogenic Optomechanics with a Si3N4 Membrane and Classical Laser Noise
Authors:
A. M. Jayich,
J. C. Sankey,
K. Borkje,
D. Lee,
C. Yang,
M. Underwood,
L. Childress,
A. Petrenko,
S. M. Girvin,
J. G. E. Harris
Abstract:
We demonstrate a cryogenic optomechanical system comprising a flexible Si3N4 membrane placed at the center of a free-space optical cavity in a 400 mK cryogenic environment. We observe a mechanical quality factor Q > 4 x 10^6 for the 261-kHz fundamental drum-head mode of the membrane, and a cavity resonance halfwidth of 60 kHz. The optomechanical system therefore operates in the resolved sideband l…
▽ More
We demonstrate a cryogenic optomechanical system comprising a flexible Si3N4 membrane placed at the center of a free-space optical cavity in a 400 mK cryogenic environment. We observe a mechanical quality factor Q > 4 x 10^6 for the 261-kHz fundamental drum-head mode of the membrane, and a cavity resonance halfwidth of 60 kHz. The optomechanical system therefore operates in the resolved sideband limit. We monitor the membrane's thermal motion using a heterodyne optical circuit capable of simultaneously measuring both of the mechanical sidebands, and find that the observed optical spring and damping quantitatively agree with theory. The mechanical sidebands exhibit a Fano lineshape, and to explain this we develop a theory describing heterodyne measurements in the presence of correlated classical laser noise. Finally, we discuss the use of a passive filter cavity to remove classical laser noise, and consider the future requirements for laser cooling this relatively large and low-frequency mechanical element to very near its quantum mechanical ground state.
△ Less
Submitted 12 September, 2012;
originally announced September 2012.
-
Fiber-Cavity-Based Optomechanical Device
Authors:
N. E. Flowers-Jacobs,
S. W. Hoch,
J. C. Sankey,
A. Kashkanova,
A. M. Jayich,
C. Deutsch,
J. Reichel,
J. G. E. Harris
Abstract:
We describe an optomechanical device consisting of a fiber-based optical cavity containing a silicon nitiride membrane. In comparison with typical free-space cavities, the fiber-cavity's small mode size (10 μm waist, 80 μm length) allows the use of smaller, lighter membranes and increases the cavity-membrane linear coupling to 3 GHz/nm and quadratic coupling to 20 GHz/nm^2. This device is also int…
▽ More
We describe an optomechanical device consisting of a fiber-based optical cavity containing a silicon nitiride membrane. In comparison with typical free-space cavities, the fiber-cavity's small mode size (10 μm waist, 80 μm length) allows the use of smaller, lighter membranes and increases the cavity-membrane linear coupling to 3 GHz/nm and quadratic coupling to 20 GHz/nm^2. This device is also intrinsically fiber-coupled and uses glass ferrules for passive alignment. These improvements will greatly simplify the use of optomechanical systems, particularly in cryogenic settings. At room temperature, we expect these devices to be able to detect the shot noise of radiation pressure.
△ Less
Submitted 8 November, 2012; v1 submitted 15 June, 2012;
originally announced June 2012.
-
Measuring mechanical motion with a single spin
Authors:
S. D. Bennett,
S. Kolkowitz,
Q. P. Unterreithmeier,
P. Rabl,
A. C. Bleszynski Jayich,
J. G. E. Harris,
M. D. Lukin
Abstract:
We study theoretically the measurement of a mechanical oscillator using a single two level system as a detector. In a recent experiment, we used a single electronic spin associated with a nitrogen vacancy center in diamond to probe the thermal motion of a magnetized cantilever at room temperature {Kolkowitz et al., Science 335, 1603 (2012)}. Here, we present a detailed analysis of the sensitivity…
▽ More
We study theoretically the measurement of a mechanical oscillator using a single two level system as a detector. In a recent experiment, we used a single electronic spin associated with a nitrogen vacancy center in diamond to probe the thermal motion of a magnetized cantilever at room temperature {Kolkowitz et al., Science 335, 1603 (2012)}. Here, we present a detailed analysis of the sensitivity limits of this technique, as well as the possibility to measure the zero point motion of the oscillator. Further, we discuss the issue of measurement backaction in sequential measurements and find that although backaction heating can occur, it does not prohibit the detection of zero point motion. Throughout the paper we focus on the experimental implementation of a nitrogen vacancy center coupled to a magnetic cantilever; however, our results are applicable to a wide class of spin-oscillator systems. Implications for preparation of nonclassical states of a mechanical oscillator are also discussed.
△ Less
Submitted 30 May, 2012;
originally announced May 2012.
-
Measurement of the full distribution of the persistent current in normal-metal rings
Authors:
M. A. Castellanos-Beltran,
D. Q. Ngo,
W. E. Shanks,
A. B. Jayich,
J. G. E. Harris
Abstract:
We have measured the persistent current in individual normal metal rings over a wide range of magnetic fields. From this data, we extract the first six cumulants of the single-ring persistent current distribution. Our results are consistent with the theoretical prediction that this distribution should be nearly Gaussian (i.e., that these cumulants should be nearly zero) for diffusive metallic ring…
▽ More
We have measured the persistent current in individual normal metal rings over a wide range of magnetic fields. From this data, we extract the first six cumulants of the single-ring persistent current distribution. Our results are consistent with the theoretical prediction that this distribution should be nearly Gaussian (i.e., that these cumulants should be nearly zero) for diffusive metallic rings. This measurement highlights the particular sensitivity of persistent current to the mesoscopic fluctuations within a single coherent volume.
△ Less
Submitted 21 January, 2013; v1 submitted 17 April, 2012;
originally announced April 2012.
-
High-reflectivity, high-Q micromechanical membranes via guided resonances for enhanced optomechanical coupling
Authors:
Catvu H. Bui,
Jiangjun Zheng,
S. W. Hoch,
Lennon Y. T. Lee,
J. G. E. Harris,
Chee Wei Wong
Abstract:
Using Fano-type guided resonances (GRs) in photonic crystal (PhC) slab structures, we numerically and experimentally demonstrate optical reflectivity enhancement of high-Q SiNx membrane-type resonators used in membrane-in-the-middle optomechanical (OM) systems. Normal-incidence transmission and mechanical ringdown measurements of 50-nm-thick PhC membranes demonstrate GRs near 1064 nm, leading to a…
▽ More
Using Fano-type guided resonances (GRs) in photonic crystal (PhC) slab structures, we numerically and experimentally demonstrate optical reflectivity enhancement of high-Q SiNx membrane-type resonators used in membrane-in-the-middle optomechanical (OM) systems. Normal-incidence transmission and mechanical ringdown measurements of 50-nm-thick PhC membranes demonstrate GRs near 1064 nm, leading to a ~ 4\times increase in reflectivity while preserving high mechanical Q factors of up to ~ 5 \times 10^6. The results would allow improvement of membrane-in-the-middle OM systems by virtue of increased OM coupling, presenting a path towards ground state cooling of such a membrane and observations of related quantum effects.
△ Less
Submitted 17 October, 2011;
originally announced October 2011.
-
Normal persistent currents in proximity-effect bilayers
Authors:
O. Entin-Wohlman,
H. Bary-Soroker,
A. Aharony,
Y. Imry,
J. G. E. Harris
Abstract:
We calculate the contribution of superconducting fluctuations to the mesoscopic persistent current of an ensemble of rings, each made of a superconducting layer in contact with a normal one, in the Cooper limit. The superconducting transition temperature of the bilayer decays very quickly with the increase of the relative width of the normal layer. In contrast, when the Thouless energy is larger t…
▽ More
We calculate the contribution of superconducting fluctuations to the mesoscopic persistent current of an ensemble of rings, each made of a superconducting layer in contact with a normal one, in the Cooper limit. The superconducting transition temperature of the bilayer decays very quickly with the increase of the relative width of the normal layer. In contrast, when the Thouless energy is larger than the temperature then the suppression of the persistent current with the increase of this relative width is much slower than that of the transition temperature. This effect is similar to that predicted for magnetic impurities, although the proximity effect considered here results in pair-weakening as opposed to pair-breaking.
△ Less
Submitted 11 August, 2011;
originally announced August 2011.
-
Observability of radiation pressure shot noise in optomechanical systems
Authors:
K. Borkje,
A. Nunnenkamp,
B. M. Zwickl,
C. Yang,
J. G. E. Harris,
S. M. Girvin
Abstract:
We present a theoretical study of an experiment designed to detect radiation pressure shot noise in an optomechanical system. Our model consists of a coherently driven optical cavity mode that is coupled to a mechanical oscillator. We examine the cross-correlation between two quadratures of the output field from the cavity. We determine under which circumstances radiation pressure shot noise can b…
▽ More
We present a theoretical study of an experiment designed to detect radiation pressure shot noise in an optomechanical system. Our model consists of a coherently driven optical cavity mode that is coupled to a mechanical oscillator. We examine the cross-correlation between two quadratures of the output field from the cavity. We determine under which circumstances radiation pressure shot noise can be detected by a measurement of this cross-correlation. This is done in the general case of nonzero detuning between the frequency of the drive and the cavity resonance frequency. We study the qualitative features of the different contributions to the cross-correlator and provide quantitative figures of merit for the relative importance of the radiation pressure shot noise contribution to other contributions. We also propose a modified setup of this experiment relevant to the "membrane-in-the-middle" geometry, which potentially can avoid the problems of static bistability and classical noise in the drive.
△ Less
Submitted 20 April, 2010;
originally announced April 2010.
-
Cooling and squeezing via quadratic optomechanical coupling
Authors:
A. Nunnenkamp,
K. Borkje,
J. G. E. Harris,
S. M. Girvin
Abstract:
We explore the physics of optomechanical systems in which an optical cavity mode is coupled parametrically to the square of the position of a mechanical oscillator. We derive an effective master equation describing two-phonon cooling of the mechanical oscillator. We show that for high temperatures and weak coupling, the steady-state phonon number distribution is non-thermal (Gaussian) and that eve…
▽ More
We explore the physics of optomechanical systems in which an optical cavity mode is coupled parametrically to the square of the position of a mechanical oscillator. We derive an effective master equation describing two-phonon cooling of the mechanical oscillator. We show that for high temperatures and weak coupling, the steady-state phonon number distribution is non-thermal (Gaussian) and that even for strong cooling the mean phonon number remains finite. Moreover, we demonstrate how to achieve mechanical squeezing by driving the cavity with two beams. Finally, we calculate the optical output and squeezing spectra. Implications for optomechanics experiments with the membrane-in-the-middle geometry or ultracold atoms in optical resonators are discussed.
△ Less
Submitted 31 August, 2010; v1 submitted 14 April, 2010;
originally announced April 2010.
-
Strong and Tunable Nonlinear Optomechanical Coupling in a Low-Loss System
Authors:
Jack C. Sankey,
Cheng Yang,
Benjamin M. Zwickl,
Andrew M. Jayich,
Jack G. E. Harris
Abstract:
A major goal in optomechanics is to observe and control quantum behavior in a system consisting of a mechanical resonator coupled to an optical cavity. Work towards this goal has focused on increasing the strength of the coupling between the mechanical and optical degrees of freedom; however, the form of this coupling is crucial in determining which phenomena can be observed in such a system. He…
▽ More
A major goal in optomechanics is to observe and control quantum behavior in a system consisting of a mechanical resonator coupled to an optical cavity. Work towards this goal has focused on increasing the strength of the coupling between the mechanical and optical degrees of freedom; however, the form of this coupling is crucial in determining which phenomena can be observed in such a system. Here we demonstrate that avoided crossings in the spectrum of an optical cavity containing a flexible dielectric membrane allow us to realize several different forms of the optomechanical coupling. These include cavity detunings that are (to lowest order) linear, quadratic, or quartic in the membrane's displacement, and a cavity finesse that is linear in (or independent of) the membrane's displacement. All these couplings are realized in a single device with extremely low optical loss and can be tuned over a wide range in situ; in particular, we find that the quadratic coupling can be increased three orders of magnitude beyond previous devices. As a result of these advances, the device presented here should be capable of demonstrating the quantization of the membrane's mechanical energy.
△ Less
Submitted 22 February, 2010;
originally announced February 2010.
-
Mesoscopic persistent currents in a strong magnetic field
Authors:
Eran Ginossar,
Leonid I. Glazman,
Teemu Ojanen,
Felix von Oppen,
William E. Shanks,
Ania C. Bleszynski-Jayich,
J. G. E. Harris
Abstract:
Recent precision measurements of mesoscopic persistent currents in normal-metal rings rely on the interaction between the magnetic moment generated by the current and a large applied magnetic field. Motivated by this technique, we extend the theory of mesoscopic persistent currents to include the effect of the finite thickness of the ring and the resulting penetration of the large magnetic field…
▽ More
Recent precision measurements of mesoscopic persistent currents in normal-metal rings rely on the interaction between the magnetic moment generated by the current and a large applied magnetic field. Motivated by this technique, we extend the theory of mesoscopic persistent currents to include the effect of the finite thickness of the ring and the resulting penetration of the large magnetic field. We discuss both the sample-specific typical current and the ensemble-averaged current which is dominated by the effects of electron-electron interactions. We find that the magnetic field strongly suppresses the interaction-induced persistent current and so provides direct access to the independent-electron contribution. Moreover, the technique allows for measurements of the entire distribution function of the persistent current. We also discuss the consequences of the Zeeman splitting and spin-orbit scattering, and include a detailed and quantitative comparison of our theoretical results to experimental data.
△ Less
Submitted 3 February, 2010;
originally announced February 2010.
-
The photon shuttle: Landau-Zener-Stueckelberg dynamics in an optomechanical system
Authors:
Georg Heinrich,
J. G. E. Harris,
Florian Marquardt
Abstract:
The motion of micro- and nanomechanical resonators can be coupled to electromagnetic fields. Such optomechanical setups allow one to explore the interaction of light and matter in a new regime at the boundary between quantum and classical physics. We propose an approach to investigate non-equilibrium photon dynamics driven by mechanical motion in a recently developed setup with a membrane betwee…
▽ More
The motion of micro- and nanomechanical resonators can be coupled to electromagnetic fields. Such optomechanical setups allow one to explore the interaction of light and matter in a new regime at the boundary between quantum and classical physics. We propose an approach to investigate non-equilibrium photon dynamics driven by mechanical motion in a recently developed setup with a membrane between two mirrors, where photons can be shuttled between the two halves of the cavity. For modest driving strength we predict the possibility to observe an Autler-Townes splitting indicative of Rabi dynamics. For large drive, we show that this system displays Landau-Zener-Stueckelberg dynamics originally known from atomic two-state systems.
△ Less
Submitted 11 September, 2009;
originally announced September 2009.
-
A quantum spin transducer based on nano electro-mechancial resonator arrays
Authors:
P. Rabl,
S. J. Kolkowitz,
F. H. Koppens,
J. G. E. Harris,
P. Zoller,
M. D. Lukin
Abstract:
Implementation of quantum information processing faces the contradicting requirements of combining excellent isolation to avoid decoherence with the ability to control coherent interactions in a many-body quantum system. For example, spin degrees of freedom of electrons and nuclei provide a good quantum memory due to their weak magnetic interactions with the environment. However, for the same re…
▽ More
Implementation of quantum information processing faces the contradicting requirements of combining excellent isolation to avoid decoherence with the ability to control coherent interactions in a many-body quantum system. For example, spin degrees of freedom of electrons and nuclei provide a good quantum memory due to their weak magnetic interactions with the environment. However, for the same reason it is difficult to achieve controlled entanglement of spins over distances larger than tens of nanometers. Here we propose a universal realization of a quantum data bus for electronic spin qubits where spins are coupled to the motion of magnetized mechanical resonators via magnetic field gradients. Provided that the mechanical system is charged, the magnetic moments associated with spin qubits can be effectively amplified to enable a coherent spin-spin coupling over long distances via Coulomb forces. Our approach is applicable to a wide class of electronic spin qubits which can be localized near the magnetized tips and can be used for the implementation of hybrid quantum computing architectures.
△ Less
Submitted 3 August, 2009;
originally announced August 2009.
-
Persistent currents in normal metal rings: comparing high-precision experiment with theory
Authors:
A. C. Bleszynski-Jayich,
W. E. Shanks,
B. Peaudecerf,
E. Ginossar,
F. von Oppen,
L. Glazman,
J. G. E. Harris
Abstract:
Quantum mechanics predicts that the equilibrium state of a resistive electrical circuit contains a dissipationless current. This persistent current has been the focus of considerable theoretical and experimental work, but its basic properties remain a topic of controversy. The main experimental challenges in studying persistent currents have been the small signals they produce and their exceptio…
▽ More
Quantum mechanics predicts that the equilibrium state of a resistive electrical circuit contains a dissipationless current. This persistent current has been the focus of considerable theoretical and experimental work, but its basic properties remain a topic of controversy. The main experimental challenges in studying persistent currents have been the small signals they produce and their exceptional sensitivity to their environment. To address these issues we have developed a new technique for detecting persistent currents which offers greatly improved sensitivity and reduced measurement back action. This allows us to measure the persistent current in metal rings over a wider range of temperature, ring size, and magnetic field than has been possible previously. We find that measurements of both a single ring and arrays of rings agree well with calculations based on a model of non-interacting electrons.
△ Less
Submitted 25 June, 2009;
originally announced June 2009.
-
Improved "Position Squared" Readout of a Mechanical Resonator in an Optical Cavity Using Degenerate Optical Modes
Authors:
Jack C. Sankey,
Andrew M. Jayich,
Benjamin M. Zwickl,
Cheng Yang,
Jack G. E. Harris
Abstract:
Optomechanical devices in which a flexible SiN membrane is placed inside an optical cavity allow for very high finesse and mechanical quality factor in a single device. They also provide fundamentally new functionality: the cavity detuning can be a quadratic function of membrane position. This enables a measurement of "position squared" ($x^2$) and in principle a QND phonon number readout of the…
▽ More
Optomechanical devices in which a flexible SiN membrane is placed inside an optical cavity allow for very high finesse and mechanical quality factor in a single device. They also provide fundamentally new functionality: the cavity detuning can be a quadratic function of membrane position. This enables a measurement of "position squared" ($x^2$) and in principle a QND phonon number readout of the membrane. However, the readout achieved using a single transverse cavity mode is not sensitive enough to observe quantum jumps between phonon Fock states.
Here we demonstrate an $x^2$-sensitivity that is orders of magnitude stronger using two transverse cavity modes that are nearly degenerate. We derive a first-order perturbation theory to describe the interactions between nearly-degenerate cavity modes and achieve good agreement with our measurements using realistic parameters. We also demonstrate theoretically that the $x^2$-coupling should be easily tunable over a wide range.
△ Less
Submitted 9 November, 2008;
originally announced November 2008.
-
Dispersive optomechanics: a membrane inside a cavity
Authors:
A. M. Jayich,
J. C. Sankey,
B. M. Zwickl,
C. Yang,
J. D. Thompson,
S. M. Girvin,
A. A. Clerk,
F. Marquardt,
J. G. E. Harris
Abstract:
We present the results of theoretical and experimental studies of dispersively coupled (or "membrane in the middle") optomechanical systems. We calculate the linear optical properties of a high finesse cavity containing a thin dielectric membrane. We focus on the cavity's transmission, reflection, and finesse as a function of the membrane's position along the cavity axis and as a function of its…
▽ More
We present the results of theoretical and experimental studies of dispersively coupled (or "membrane in the middle") optomechanical systems. We calculate the linear optical properties of a high finesse cavity containing a thin dielectric membrane. We focus on the cavity's transmission, reflection, and finesse as a function of the membrane's position along the cavity axis and as a function of its optical loss. We compare these calculations with measurements and find excellent agreement in cavities with empty-cavity finesses in the range 10^4 to 10^5. The imaginary part of the membrane's index of refraction is found to be approximately 10^(-4). We calculate the laser cooling performance of this system, with a particular focus on the less-intuitive regime in which photons "tunnel" through the membrane on a time scale comparable to the membrane's period of oscillation. Lastly, we present calculations of quantum non-demolition measurements of the membrane's phonon number in the low signal-to-noise regime where the phonon lifetime is comparable to the QND readout time.
△ Less
Submitted 23 May, 2008;
originally announced May 2008.
-
High quality mechanical and optical properties of commercial silicon nitride membranes
Authors:
B. M. Zwickl,
W. E. Shanks,
A. M. Jayich,
C. Yang,
A. C. Bleszynski Jayich,
J. D. Thompson,
J. G. E. Harris
Abstract:
We have measured the optical and mechanical loss of commercial silicon nitride membranes. We find that 50 nm-thick, 1 mm^2 membranes have mechanical Q > 10^6 at 293 K, and Q > 10^7 at 300 mK, well above what has been observed in devices with comparable dimensions. The near-IR optical loss at 293 K is less than 2E-4. This combination of properties make these membranes attractive candidates for st…
▽ More
We have measured the optical and mechanical loss of commercial silicon nitride membranes. We find that 50 nm-thick, 1 mm^2 membranes have mechanical Q > 10^6 at 293 K, and Q > 10^7 at 300 mK, well above what has been observed in devices with comparable dimensions. The near-IR optical loss at 293 K is less than 2E-4. This combination of properties make these membranes attractive candidates for studying quantum effects in optomechanical systems.
△ Less
Submitted 14 November, 2007;
originally announced November 2007.
-
High sensitivity cantilevers for measuring persistent currents in normal metal rings
Authors:
Ania C. Bleszynski Jayich,
Will E. Shanks,
Rob Ilic,
J. G. E. Harris
Abstract:
We propose a new approach to measuring persistent currents in normal metal rings. By integrating micron-scale metal rings into sensitive micromechanical cantilevers and using the cantilevers as torque magnetometers, it should be possible to measure the rings' persistent currents with greater sensitivity than the SQUID-based and microwave resonator-based detectors used in the past. In addition, c…
▽ More
We propose a new approach to measuring persistent currents in normal metal rings. By integrating micron-scale metal rings into sensitive micromechanical cantilevers and using the cantilevers as torque magnetometers, it should be possible to measure the rings' persistent currents with greater sensitivity than the SQUID-based and microwave resonator-based detectors used in the past. In addition, cantilever-based detectors may allow for measurements in a cleaner electromagnetic environment. We have fabricated ultra sensitive cantilevers with integrated rings and measured their mechanical properties. We present an estimate of the persistent current sensitivity of these cantilever-based detectors, focusing on the limits set by the cantilever's Brownian motion and the shot noise in the laser interferometer that monitors the cantilever.
△ Less
Submitted 27 October, 2007;
originally announced October 2007.
-
Noise thermometry and electron thermometry of a sample-on-cantilever system below 1 Kelvin
Authors:
A. C. Bleszynski Jayich,
W. E. Shanks,
J. G. E. Harris
Abstract:
We have used two types of thermometry to study thermal fluctuations in a microcantilever-based system below 1 K. We measured the temperature of a cantilever's macroscopic degree-of-freedom (via the Brownian motion of its lowest flexural mode) and its microscopic degrees-of-freedom (via the electron temperature of a metal sample mounted on the cantilever). We also measured both temperatures' resp…
▽ More
We have used two types of thermometry to study thermal fluctuations in a microcantilever-based system below 1 K. We measured the temperature of a cantilever's macroscopic degree-of-freedom (via the Brownian motion of its lowest flexural mode) and its microscopic degrees-of-freedom (via the electron temperature of a metal sample mounted on the cantilever). We also measured both temperatures' response to a localized heat source. We find it possible to maintain thermal equilibrium between these two temperatures and a refrigerator down to at least 300 mK. These results are promising for ongoing experiments to probe quantum effects using micromechanical devices.
△ Less
Submitted 21 August, 2007;
originally announced August 2007.
-
Strong dispersive coupling of a high finesse cavity to a micromechanical membrane
Authors:
J. D. Thompson,
B. M. Zwickl,
A. M. Jayich,
Florian Marquardt,
S. M. Girvin,
J. G. E. Harris
Abstract:
Macroscopic mechanical objects and electromagnetic degrees of freedom couple to each other via radiation pressure. Optomechanical systems with sufficiently strong coupling are predicted to exhibit quantum effects and are a topic of considerable interest. Devices reaching this regime would offer new types of control of the quantum state of both light and matter and would provide a new arena in wh…
▽ More
Macroscopic mechanical objects and electromagnetic degrees of freedom couple to each other via radiation pressure. Optomechanical systems with sufficiently strong coupling are predicted to exhibit quantum effects and are a topic of considerable interest. Devices reaching this regime would offer new types of control of the quantum state of both light and matter and would provide a new arena in which to explore the boundary between quantum and classical physics. Experiments to date have achieved sufficient optomechanical coupling to laser-cool mechanical devices but have not yet reached the quantum regime. The outstanding technical challenge in this field is integrating sensitive micromechanical elements (which must be small, light, and flexible) into high finesse cavities (which are typically much more rigid and massive) without compromising the mechanical or optical properties of either. A second, and more fundamental, challenge is to read out the mechanical element's quantum state: displacement measurements (no matter how sensitive) cannot determine the energy eigenstate of an oscillator, and measurements which couple to quantities other than displacement have been difficult to realize. Here we present a novel optomechanical system which seems to resolve both these challenges. We demonstrate a cavity which is detuned by the motion of a thin dielectric membrane placed between two macroscopic, rigid, high-finesse mirrors. This approach segregates optical and mechanical functionality to physically distinct structures and avoids compromising either. It also allows for direct measurement of the square of the membrane's displacement, and thus in principle the membrane's energy eigenstate. We estimate it should be practical to use this scheme to observe quantum jumps of a mechanical system.
△ Less
Submitted 13 July, 2007; v1 submitted 11 July, 2007;
originally announced July 2007.
-
Spin-exchange collisions of submerged shell atoms below 1 Kelvin
Authors:
J. G. E. Harris,
S. V. Nguyen,
S. C. Doret,
W. Ketterle,
J. M. Doyle
Abstract:
Angular momentum changing collisions can be suppressed in atoms whose valence electrons are submerged beneath filled shells of higher principle quantum number. To determine whether spin-exchange collisions are suppressed in these "submerged shell" atoms, we measured spin-exchange collisions of six hyperfine states of Mn at temperatures below 1 K. Although the 3d valence electrons in Mn are subme…
▽ More
Angular momentum changing collisions can be suppressed in atoms whose valence electrons are submerged beneath filled shells of higher principle quantum number. To determine whether spin-exchange collisions are suppressed in these "submerged shell" atoms, we measured spin-exchange collisions of six hyperfine states of Mn at temperatures below 1 K. Although the 3d valence electrons in Mn are submerged beneath a filled 4s orbital, we find that the spin exchange rate coefficients are similar to those of Na and H (which are non-submerged shell atoms).
△ Less
Submitted 4 May, 2007;
originally announced May 2007.
-
Stable, mode-matched, medium-finesse optical cavity incorporating a microcantilever mirror
Authors:
J. G. E. Harris,
B. M. Zwickl,
A. M. Jayich
Abstract:
A stable optical resonator has been built using a 30 micrometer-wide, metal-coated microcantilever as one mirror. The second mirror was a 12.7 mm-diameter concave dielectric mirror. By positioning the two mirrors 75 mm apart in a near-hemispherical configuration, a Fabry-Perot cavity with a finesse equal to 55 was achieved. The finesse was limited by the optical loss in the cantilever's metal co…
▽ More
A stable optical resonator has been built using a 30 micrometer-wide, metal-coated microcantilever as one mirror. The second mirror was a 12.7 mm-diameter concave dielectric mirror. By positioning the two mirrors 75 mm apart in a near-hemispherical configuration, a Fabry-Perot cavity with a finesse equal to 55 was achieved. The finesse was limited by the optical loss in the cantilever's metal coating; diffraction losses from the small mirror were negligible. The cavity achieved passive laser cooling of the cantilever's Brownian motion.
△ Less
Submitted 16 May, 2006;
originally announced May 2006.
-
Dynamical multistability in high-finesse micromechanical optical cavities
Authors:
Florian Marquardt,
J. G. E. Harris,
S. M. Girvin
Abstract:
We analyze the nonlinear dynamics of a high-finesse optical cavity in which one mirror is mounted on a flexible mechanical element. We find that this system is governed by an array of dynamical attractors, which arise from phase-locking between the mechanical oscillations of the mirror and the ringing of the light intensity in the cavity. We describe an analytical approximation to map out the di…
▽ More
We analyze the nonlinear dynamics of a high-finesse optical cavity in which one mirror is mounted on a flexible mechanical element. We find that this system is governed by an array of dynamical attractors, which arise from phase-locking between the mechanical oscillations of the mirror and the ringing of the light intensity in the cavity. We describe an analytical approximation to map out the diagram of attractors in parameter space, derive the slow amplitude dynamics of the system, including thermally activated hopping between different attractors, and suggest a scheme for exploiting the dynamical multistability in the measurement of small displacements.
△ Less
Submitted 23 February, 2005;
originally announced February 2005.
-
Buffer gas cooling and trapping of atoms with small magnetic moments
Authors:
J. G. E. Harris,
R. A. Michniak,
S. V. Nguyen,
W. Ketterle,
J. M Doyle
Abstract:
Buffer gas cooling was extended to trap atoms with small magnetic moment (mu). For mu greater than or equal to 3mu_B, 1e12 atoms were buffer gas cooled, trapped, and thermally isolated in ultra high vacuum with roughly unit efficiency. For mu < 3mu_B, the fraction of atoms remaining after full thermal isolation was limited by two processes: wind from the rapid removal of the buffer gas and desor…
▽ More
Buffer gas cooling was extended to trap atoms with small magnetic moment (mu). For mu greater than or equal to 3mu_B, 1e12 atoms were buffer gas cooled, trapped, and thermally isolated in ultra high vacuum with roughly unit efficiency. For mu < 3mu_B, the fraction of atoms remaining after full thermal isolation was limited by two processes: wind from the rapid removal of the buffer gas and desorbing helium films. In our current apparatus we trap atoms with mu greater than or equal to 1.1mu_B, and thermally isolate atoms with mu greater than or equal to 2mu_B. Extrapolation of our results combined with simulations of the loss processes indicate that it is possible to trap and evaporatively cool mu = 1mu_B atoms using buffer gas cooling.
△ Less
Submitted 14 November, 2003;
originally announced November 2003.
-
Damping of micromechanical structures by paramagnetic relaxation
Authors:
J. G. E. Harris,
R. Knobel,
K. D. Maranowski,
A. C. Gossard,
N. Samarth,
D. D. Awschalom
Abstract:
We find that the damping of micromechanical cantilevers is sensitive to the relaxation dynamics of paramagnetic ions contained within the levers. We measure cantilevers containing paramagnetic Mn ions as a function of temperature, magnetic field, and the vibrational mode of the lever and find that the levers damping is strongly enhanced by the interplay between the motion of the lever, the ions…
▽ More
We find that the damping of micromechanical cantilevers is sensitive to the relaxation dynamics of paramagnetic ions contained within the levers. We measure cantilevers containing paramagnetic Mn ions as a function of temperature, magnetic field, and the vibrational mode of the lever and find that the levers damping is strongly enhanced by the interplay between the motion of the lever, the ions magnetic anisotropy, and the ratio of the ions longitudinal relaxation rate to the resonance frequency of the cantilever. This enhancement can improve the levers ability to probe the relaxation behavior of paramagnetic or superparamagetic systems; it may also represent a previously unrecognized source of intrinsic dissipation in micromechanical structures.
△ Less
Submitted 22 March, 2003;
originally announced March 2003.
-
Landau Level Crossings and Extended-State Mapping in Magnetic Two-dimensional Electron Gases
Authors:
R. Knobel,
N. Samarth,
J. G. E. Harris,
D. D. Awschalom
Abstract:
We present longitudinal and Hall magneto-resistance measurements of a ``magnetic'' two-dimensional electron gas (2DEG) formed in modulation-doped Zn$_{1-x-y}$Cd$_{x}$Mn$_{y}$Se quantum wells. The electron spin splitting is temperature and magnetic field dependent, resulting in striking features as Landau levels of opposite spin cross near the Fermi level. Magnetization measurements on the same s…
▽ More
We present longitudinal and Hall magneto-resistance measurements of a ``magnetic'' two-dimensional electron gas (2DEG) formed in modulation-doped Zn$_{1-x-y}$Cd$_{x}$Mn$_{y}$Se quantum wells. The electron spin splitting is temperature and magnetic field dependent, resulting in striking features as Landau levels of opposite spin cross near the Fermi level. Magnetization measurements on the same sample probe the total density of states and Fermi energy, allowing us to fit the transport data using a model involving extended states centered at each Landau level and two-channel conduction for spin-up and spin-down electrons. A mapping of the extended states over the whole quantum Hall effect regime shows no floating of extended states as Landau levels cross near the Fermi level.
△ Less
Submitted 19 March, 2001;
originally announced March 2001.
-
Excess Spin and the Dynamics of Antiferromagnetic Ferritin
Authors:
J. G. E. Harris,
J. E. Grimaldi,
D. D. Awschalom,
A. Chiolero,
D. Loss
Abstract:
Temperature-dependent magnetization measurements on a series of synthetic ferritin proteins containing from 100 to 3000 Fe(III) ions are used to determine the uncompensated moment of these antiferromagnetic particles. The results are compared with recent theories of macroscopic quantum coherence which explicitly include the effect of this excess moment. The scaling of the excess moment with prot…
▽ More
Temperature-dependent magnetization measurements on a series of synthetic ferritin proteins containing from 100 to 3000 Fe(III) ions are used to determine the uncompensated moment of these antiferromagnetic particles. The results are compared with recent theories of macroscopic quantum coherence which explicitly include the effect of this excess moment. The scaling of the excess moment with protein size is consistent with a simple model of finite size effects and sublattice noncompensation.
△ Less
Submitted 3 April, 1999;
originally announced April 1999.