-
Characterization of 4H-SiC Low Gain Avalanche Detectors (LGADs)
Authors:
Tao Yang,
Ben Sekely,
Yashas Satapathy,
Greg Allion,
Philip Barletta,
Carl Haber,
Steve Holland,
John F. Muth,
Spyridon Pavlidis,
Stefania Stucci
Abstract:
4H-SiC low gain avalanche detectors (LGADs) have been fabricated and characterized. The devices employ a circular mesa design with low-resistivity contacts and an SiO$_2$ passivation layer. The I-V and C-V characteristics of the 4H-SiC LGADs are compared with complementary 4H-SiC PiN diodes to confirm a high breakdown voltage and low leakage current. Both LGADs and PiN diodes were irradiated with…
▽ More
4H-SiC low gain avalanche detectors (LGADs) have been fabricated and characterized. The devices employ a circular mesa design with low-resistivity contacts and an SiO$_2$ passivation layer. The I-V and C-V characteristics of the 4H-SiC LGADs are compared with complementary 4H-SiC PiN diodes to confirm a high breakdown voltage and low leakage current. Both LGADs and PiN diodes were irradiated with $α$ particles from a $^{210}_{84}\rm{Po}$ source. The charge collected by each device was compared, and it was observed that low-gain charge carrier multiplication is achieved in the 4H-SiC LGAD.
△ Less
Submitted 11 September, 2024; v1 submitted 22 August, 2024;
originally announced August 2024.
-
Verbesserung des Record Linkage für die Gesundheitsforschung in Deutschland
Authors:
Timm Intemann,
Knut Kaulke,
Dennis-Kenji Kipker,
Vanessa Lettieri,
Christoph Stallmann,
Carsten O. Schmidt,
Lars Geidel,
Martin Bialke,
Christopher Hampf,
Dana Stahl,
Martin Lablans,
Florens Rohde,
Martin Franke,
Klaus Kraywinkel,
Joachim Kieschke,
Sebastian Bartholomäus,
Anatol-Fiete Näher,
Galina Tremper,
Mohamed Lambarki,
Stefanie March,
Fabian Prasser,
Anna Christine Haber,
Johannes Drepper,
Irene Schlünder,
Toralf Kirsten
, et al. (5 additional authors not shown)
Abstract:
Record linkage means linking data from multiple sources. This approach enables the answering of scientific questions that cannot be addressed using single data sources due to limited variables. The potential of linked data for health research is enormous, as it can enhance prevention, treatment, and population health policies. Due the sensitivity of health data, there are strict legal requirements…
▽ More
Record linkage means linking data from multiple sources. This approach enables the answering of scientific questions that cannot be addressed using single data sources due to limited variables. The potential of linked data for health research is enormous, as it can enhance prevention, treatment, and population health policies. Due the sensitivity of health data, there are strict legal requirements to prevent potential misuse. However, these requirements also limit the use of health data for research, thereby hindering innovations in prevention and care. Also, comprehensive Record linkage in Germany is often challenging due to lacking unique personal identifiers or interoperable solutions. Rather, the need to protect data is often weighed against the importance of research aiming at healthcare enhancements: for instance, data protection officers may demand the informed consent of individual study participants for data linkage, even when this is not mandatory. Furthermore, legal frameworks may be interpreted differently on varying occasions. Given both, technical and legal challenges, record linkage for health research in Germany falls behind the standards of other European countries. To ensure successful record linkage, case-specific solutions must be developed, tested, and modified as necessary before implementation. This paper discusses limitations and possibilities of various data linkage approaches tailored to different use cases in compliance with the European General Data Protection Regulation. It further describes requirements for achieving a more research-friendly approach to linking health data records in Germany. Additionally, it provides recommendations to legislators. The objective of this work is to improve record linkage for health research in Germany.
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Detector R&D needs for the next generation $e^+e^-$ collider
Authors:
A. Apresyan,
M. Artuso,
J. Brau,
H. Chen,
M. Demarteau,
Z. Demiragli,
S. Eno,
J. Gonski,
P. Grannis,
H. Gray,
O. Gutsche,
C. Haber,
M. Hohlmann,
J. Hirschauer,
G. Iakovidis,
K. Jakobs,
A. J. Lankford,
C. Pena,
S. Rajagopalan,
J. Strube,
C. Tully,
C. Vernieri,
A. White,
G. W. Wilson,
S. Xie
, et al. (3 additional authors not shown)
Abstract:
The 2021 Snowmass Energy Frontier panel wrote in its final report "The realization of a Higgs factory will require an immediate, vigorous and targeted detector R&D program". Both linear and circular $e^+e^-$ collider efforts have developed a conceptual design for their detectors and are aggressively pursuing a path to formalize these detector concepts. The U.S. has world-class expertise in particl…
▽ More
The 2021 Snowmass Energy Frontier panel wrote in its final report "The realization of a Higgs factory will require an immediate, vigorous and targeted detector R&D program". Both linear and circular $e^+e^-$ collider efforts have developed a conceptual design for their detectors and are aggressively pursuing a path to formalize these detector concepts. The U.S. has world-class expertise in particle detectors, and is eager to play a leading role in the next generation $e^+e^-$ collider, currently slated to become operational in the 2040s. It is urgent that the U.S. organize its efforts to provide leadership and make significant contributions in detector R&D. These investments are necessary to build and retain the U.S. expertise in detector R&D and future projects, enable significant contributions during the construction phase and maintain its leadership in the Energy Frontier regardless of the choice of the collider project. In this document, we discuss areas where the U.S. can and must play a leading role in the conceptual design and R&D for detectors for $e^+e^-$ colliders.
△ Less
Submitted 26 June, 2023; v1 submitted 23 June, 2023;
originally announced June 2023.
-
Solid State Detectors and Tracking for Snowmass
Authors:
A. Affolder,
A. Apresyan,
S. Worm,
M. Albrow,
D. Ally,
D. Ambrose,
E. Anderssen,
N. Apadula,
P. Asenov,
W. Armstrong,
M. Artuso,
A. Barbier,
P. Barletta,
L. Bauerdick,
D. Berry,
M. Bomben,
M. Boscardin,
J. Brau,
W. Brooks,
M. Breidenbach,
J. Buckley,
V. Cairo,
R. Caputo,
L. Carpenter,
M. Centis-Vignali
, et al. (110 additional authors not shown)
Abstract:
Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the…
▽ More
Tracking detectors are of vital importance for collider-based high energy physics (HEP) experiments. The primary purpose of tracking detectors is the precise reconstruction of charged particle trajectories and the reconstruction of secondary vertices. The performance requirements from the community posed by the future collider experiments require an evolution of tracking systems, necessitating the development of new techniques, materials and technologies in order to fully exploit their physics potential. In this article we summarize the discussions and conclusions of the 2022 Snowmass Instrumentation Frontier subgroup on Solid State and Tracking Detectors (Snowmass IF03).
△ Less
Submitted 19 October, 2022; v1 submitted 8 September, 2022;
originally announced September 2022.
-
Fast Timing With Silicon Carbide Low Gain Avalanche Detectors
Authors:
P. Barletta,
M. Cerullo,
C. Haber,
S. E. Holland,
J. Muth,
B. Sekely
Abstract:
4H-Silicon Carbide, when considered as a material for the fabrication of Low Gain Avalanche Detectors for particle timing and position measurement, offers potential advantages over Silicon. We discuss an ongoing study of this material aimed at the fabrication and test of prototype fast timing sensors. This work is well aligned with technical directions identified in the recent Department of Energy…
▽ More
4H-Silicon Carbide, when considered as a material for the fabrication of Low Gain Avalanche Detectors for particle timing and position measurement, offers potential advantages over Silicon. We discuss an ongoing study of this material aimed at the fabrication and test of prototype fast timing sensors. This work is well aligned with technical directions identified in the recent Department of Energy study, Basic Research Needs for High Energy Physics Detector Research and Development.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
The ABC130 barrel module prototyping programme for the ATLAS strip tracker
Authors:
Luise Poley,
Craig Sawyer,
Sagar Addepalli,
Anthony Affolder,
Bruno Allongue,
Phil Allport,
Eric Anderssen,
Francis Anghinolfi,
Jean-François Arguin,
Jan-Hendrik Arling,
Olivier Arnaez,
Nedaa Alexandra Asbah,
Joe Ashby,
Eleni Myrto Asimakopoulou,
Naim Bora Atlay,
Ludwig Bartsch,
Matthew J. Basso,
James Beacham,
Scott L. Beaupré,
Graham Beck,
Carl Beichert,
Laura Bergsten,
Jose Bernabeu,
Prajita Bhattarai,
Ingo Bloch
, et al. (224 additional authors not shown)
Abstract:
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000…
▽ More
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 8: Instrumentation Frontier
Authors:
M. Demarteau,
R. Lipton,
H. Nicholson,
I. Shipsey,
D. Akerib,
A. Albayrak-Yetkin,
J. Alexander,
J. Anderson,
M. Artuso,
D. Asner,
R. Ball,
M. Battaglia,
C. Bebek,
J. Beene,
Y. Benhammou,
E. Bentefour,
M. Bergevin,
A. Bernstein,
B. Bilki,
E. Blucher,
G. Bolla,
D. Bortoletto,
N. Bowden,
G. Brooijmans,
K. Byrum
, et al. (189 additional authors not shown)
Abstract:
These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and iss…
▽ More
These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 8, on the Instrumentation Frontier, discusses the instrumentation needs of future experiments in the Energy, Intensity, and Cosmic Frontiers, promising new technologies for particle physics research, and issues of gathering resources for long-term research in this area.
△ Less
Submitted 23 January, 2014;
originally announced January 2014.
-
Sensor Compendium
Authors:
M. Artuso,
M. Battaglia,
G. Bolla,
D. Bortoletto,
B. Cabrera,
J. E. Carlstrom,
C. L. Chang,
W. Cooper,
C. Da Via,
M. Demarteau,
J. Fast,
H. Frisch,
M. Garcia-Sciveres,
S. Golwala,
C. Haber,
J. Hall,
E. Hoppe,
K. D. Irwin,
H. Kagan,
C. Kenney,
A. T. Lee,
D. Lynn,
J. Orrell,
M. Pyle,
R. Rusack
, et al. (7 additional authors not shown)
Abstract:
Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, e…
▽ More
Sensors play a key role in detecting both charged particles and photons for all three frontiers in Particle Physics. The signals from an individual sensor that can be used include ionization deposited, phonons created, or light emitted from excitations of the material. The individual sensors are then typically arrayed for detection of individual particles or groups of particles. Mounting of new, ever higher performance experiments, often depend on advances in sensors in a range of performance characteristics. These performance metrics can include position resolution for passing particles, time resolution on particles impacting the sensor, and overall rate capabilities. In addition the feasible detector area and cost frequently provides a limit to what can be built and therefore is often another area where improvements are important. Finally, radiation tolerance is becoming a requirement in a broad array of devices. We present a status report on a broad category of sensors, including challenges for the future and work in progress to solve those challenges
△ Less
Submitted 25 October, 2013; v1 submitted 18 October, 2013;
originally announced October 2013.
-
Measurement of the Mass Difference Between Top and Anti-top Quarks at CDF
Authors:
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce,
G. Bauer
, et al. (490 additional authors not shown)
Abstract:
We present a measurement of the mass difference between top ($t$) and anti-top ($\bar{t}$) quarks using $t\bar{t}$ candidate events reconstructed in the final state with one lepton and multiple jets. We use the full data set of Tevatron $\sqrt{s} = 1.96$ TeV proton-antiproton collisions recorded by the CDF II detector, corresponding to an integrated luminosity of 8.7 fb$^{-1}$. We estimate event-b…
▽ More
We present a measurement of the mass difference between top ($t$) and anti-top ($\bar{t}$) quarks using $t\bar{t}$ candidate events reconstructed in the final state with one lepton and multiple jets. We use the full data set of Tevatron $\sqrt{s} = 1.96$ TeV proton-antiproton collisions recorded by the CDF II detector, corresponding to an integrated luminosity of 8.7 fb$^{-1}$. We estimate event-by-event the mass difference to construct templates for top-quark signal events and background events. The resulting mass difference distribution of data compared to signal and background templates using a likelihood fit yields $ΔM_{top} = {M}_{t} - {M}_{\bar{t}} = -1.95 $pm$ 1.11 (stat) $pm$ 0.59 (syst)$ and is in agreement with the standard model prediction of no mass difference.
△ Less
Submitted 28 January, 2013; v1 submitted 23 October, 2012;
originally announced October 2012.
-
Search for the Higgs boson in the all-hadronic final state using the full CDF data set
Authors:
CDF Collaboration,
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce
, et al. (491 additional authors not shown)
Abstract:
This paper reports the result of a search for the standard model Higgs boson in events containing four reconstructed jets associated with quarks. For masses below 135GeV/c2, Higgs boson decays to bottom-antibottom quark pairs are dominant and result primarily in two hadronic jets. An additional two jets can be produced in the hadronic decay of a W or Z boson produced in association with the Higgs…
▽ More
This paper reports the result of a search for the standard model Higgs boson in events containing four reconstructed jets associated with quarks. For masses below 135GeV/c2, Higgs boson decays to bottom-antibottom quark pairs are dominant and result primarily in two hadronic jets. An additional two jets can be produced in the hadronic decay of a W or Z boson produced in association with the Higgs boson, or from the incoming quarks that produced the Higgs boson through the vector-boson fusion process. The search is performed using a sample of \sqrt{s} = 1.96 TeV proton-antiproton collisions corresponding to an integrated luminosity of 9.45 fb-1 recorded by the CDF II detector. The data are in agreement with the background model and 95% credibility level upper limits on Higgs boson production are set as a function of the Higgs boson mass. The median expected (observed) limit for a 125GeV/c2 Higgs boson is 11.0 (9.0) times the predicted standard model rate.
△ Less
Submitted 29 November, 2012; v1 submitted 31 August, 2012;
originally announced August 2012.
-
Precision Top-Quark Mass Measurements at CDF
Authors:
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce,
G. Bauer
, et al. (490 additional authors not shown)
Abstract:
We present a precision measurement of the top-quark mass using the full sample of Tevatron $\sqrt{s}=1.96$ TeV proton-antiproton collisions collected by the CDF II detector, corresponding to an integrated luminosity of 8.7 $fb^{-1}$. Using a sample of $t\bar{t}$ candidate events decaying into the lepton+jets channel, we obtain distributions of the top-quark masses and the invariant mass of two jet…
▽ More
We present a precision measurement of the top-quark mass using the full sample of Tevatron $\sqrt{s}=1.96$ TeV proton-antiproton collisions collected by the CDF II detector, corresponding to an integrated luminosity of 8.7 $fb^{-1}$. Using a sample of $t\bar{t}$ candidate events decaying into the lepton+jets channel, we obtain distributions of the top-quark masses and the invariant mass of two jets from the $W$ boson decays from data. We then compare these distributions to templates derived from signal and background samples to extract the top-quark mass and the energy scale of the calorimeter jets with {\it in situ} calibration. The likelihood fit of the templates from signal and background events to the data yields the single most-precise measurement of the top-quark mass, $\mtop = 172.85 $\pm$ 0.71 (stat) $\pm$ 0.85 (syst) GeV/c^{2}.$
△ Less
Submitted 29 July, 2012;
originally announced July 2012.
-
An inclusive search for the Higgs boson in the four-lepton final state at CDF
Authors:
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce,
G. Bauer
, et al. (490 additional authors not shown)
Abstract:
An inclusive search for the standard model Higgs boson using the four-lepton final state in proton-antiproton collisions produced by the Tevatron at sqrt(s) = 1.96 TeV is conducted. The data are recorded by the CDF II detector and correspond to an integrated luminosity of 9.7 /fb. Three distinct Higgs decay modes, namely ZZ, WW, and tau-tau, are simultaneously probed. Nine potential signal events…
▽ More
An inclusive search for the standard model Higgs boson using the four-lepton final state in proton-antiproton collisions produced by the Tevatron at sqrt(s) = 1.96 TeV is conducted. The data are recorded by the CDF II detector and correspond to an integrated luminosity of 9.7 /fb. Three distinct Higgs decay modes, namely ZZ, WW, and tau-tau, are simultaneously probed. Nine potential signal events are selected and found to be consistent with the background expectation. We set a 95% credibility limit on the production cross section times the branching ratio and subsequent decay to the four lepton final state for hypothetical Higgs boson masses between 120 GeV/c^2 and 300 GeV/c^2.
△ Less
Submitted 20 July, 2012;
originally announced July 2012.
-
Search for a low mass Standard Model Higgs boson in the tau-tau decay channel in $p\bar{p}$ collisions at $\sqrt{s}$ = 1.96 TeV
Authors:
CDF Collaboration,
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce
, et al. (491 additional authors not shown)
Abstract:
We report on a search for the standard model Higgs boson decaying into pairs of tau leptons in $p\bar{p}$ collisions produced by the Tevatron at $\sqrt{s}$ = 1.96 TeV. The analyzed data sample was recorded by the CDFII detector and corresponds to an integrated luminosity of 6.0 fb$^{-1}$. The search is performed in the final state with one tau decaying leptonically and the second one identified th…
▽ More
We report on a search for the standard model Higgs boson decaying into pairs of tau leptons in $p\bar{p}$ collisions produced by the Tevatron at $\sqrt{s}$ = 1.96 TeV. The analyzed data sample was recorded by the CDFII detector and corresponds to an integrated luminosity of 6.0 fb$^{-1}$. The search is performed in the final state with one tau decaying leptonically and the second one identified through its semi-hadronic decay.Since no significant excess is observed, a 95% credibility level upper limit on the production cross section times branching ratio to the tau-tau final state is set for hypothetical Higgs boson masses between 100 and 150 GeV/$c^2$. For a Higgs boson of 120 GeV/$c^2$ the observed (expected) limit is 14.6 (15.3) the predicted value.
△ Less
Submitted 23 January, 2012;
originally announced January 2012.
-
Search for Standard Model Higgs Boson Production in Association with a W Boson Using a Matrix Element Technique at CDF in p-bar{p} Collisions at sqrt{s} = 1.96 TeV
Authors:
CDF Collaboration,
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce
, et al. (490 additional authors not shown)
Abstract:
This paper presents a search for standard model Higgs boson production in association with a $W$ boson using events recorded by the CDF experiment in a dataset corresponding to an integrated luminosity of 5.6 fb-1. The search is performed using a matrix element technique in which the signal and background hypotheses are used to create a powerful discriminator. The discriminant output distributions…
▽ More
This paper presents a search for standard model Higgs boson production in association with a $W$ boson using events recorded by the CDF experiment in a dataset corresponding to an integrated luminosity of 5.6 fb-1. The search is performed using a matrix element technique in which the signal and background hypotheses are used to create a powerful discriminator. The discriminant output distributions for signal and background are fit to the observed events using a binned likelihood approach to search for the Higgs boson signal. We find no evidence for a Higgs boson, and 95% confidence level (C.L.) upper limits are set on the Higgs boson production rate. The observed limits range from 3.5 to 37.6 relative to the standard model expectation for Higgs boson masses between 100 and 150 GeV. The 95% C.L. expected limit is estimated from the median of an ensemble of simulated experiments and varies between 2.9 and 32.7 relative to the production rate predicted by the standard model over the Higgs boson mass range studied.
△ Less
Submitted 18 April, 2012; v1 submitted 19 December, 2011;
originally announced December 2011.
-
Measurement of ZZ production in leptonic final states at {\surd}s of 1.96 TeV at CDF
Authors:
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce,
G. Bauer
, et al. (490 additional authors not shown)
Abstract:
In this paper we present a precise measurement of the total ZZ production cross section in pp collisions at {\surd}s= 1.96 TeV, using data collected with the CDF II detector corresponding to an integrated luminosity of approximately 6 fb-1. The result is obtained by combining separate measurements in the four-charged (lll'l'), and two-charged-lepton and two-neutral-lepton (llvv) decay modes of the…
▽ More
In this paper we present a precise measurement of the total ZZ production cross section in pp collisions at {\surd}s= 1.96 TeV, using data collected with the CDF II detector corresponding to an integrated luminosity of approximately 6 fb-1. The result is obtained by combining separate measurements in the four-charged (lll'l'), and two-charged-lepton and two-neutral-lepton (llvv) decay modes of the Z. The combined measured cross section for pp {\to} ZZ is 1.64^(+0.44)_(-0.38) pb. This is the most precise measurement of the ZZ production cross section in 1.96 TeV pp collisions to date.
△ Less
Submitted 13 December, 2011;
originally announced December 2011.
-
Search for Standard Model Higgs Boson Production in Association with a W Boson at CDF
Authors:
T. Aaltonen,
B. Álvarez González,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce,
G. Bauer
, et al. (476 additional authors not shown)
Abstract:
We present a search for the standard model Higgs boson production in association with a $W$ boson in proton-antiproton collisions ($p\bar{p}\rightarrow W^\pm H \rightarrow \ellνb\bar{b}$) at a center of mass energy of 1.96 TeV. The search employs data collected with the CDF II detector which correspond to an integrated luminosity of approximately 2.7 fb$^{-1}$. We recorded this data with two kinds…
▽ More
We present a search for the standard model Higgs boson production in association with a $W$ boson in proton-antiproton collisions ($p\bar{p}\rightarrow W^\pm H \rightarrow \ellνb\bar{b}$) at a center of mass energy of 1.96 TeV. The search employs data collected with the CDF II detector which correspond to an integrated luminosity of approximately 2.7 fb$^{-1}$. We recorded this data with two kinds of triggers. The first kind required high-p$_T$ charged leptons and the second required both missing transverse energy and jets. The search selects events consistent with a signature of a single lepton ($e^\pm/μ^\pm$), missing transverse energy, and two jets. Jets corresponding to bottom quarks are identified with a secondary vertex tagging method and a jet probability tagging method. Kinematic information is fed in an artificial neural network to improve discrimination between signal and background. The search finds that both the observed number of events and the neural network output distributions are consistent with the standard model background expectations, and sets 95% confidence level upper limits on the production cross section times branching ratio. The limits are expressed as a ratio to the standard model production rate. The limits range from 3.6 (4.3 expected) to 61.1 (43.2 expected) for Higgs masses from 100 to 150 GeV/$c^{2}$, respectively.
△ Less
Submitted 8 December, 2011;
originally announced December 2011.
-
Search for new phenomena in events with two $Z$ bosons and missing transverse momentum in $p\bar{p}$ collisions at $\sqrt{s}=1.96$ TeV
Authors:
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce,
G. Bauer
, et al. (490 additional authors not shown)
Abstract:
We present a search for new phenomena in events with two reconstructed $Z$ bosons and large missing transverse momentum, sensitive to processes $p\bar{p}\rightarrow X_2X_2 \rightarrow Z Z X_1 X_1$, where $X_2$ is an unstable particle decaying as $X_2\rightarrow ZX_1$ and $X_1$ is undetected. The particles $X_1$ and $X_2$ may be, among other possibilities, fourth generation neutrinos or supersymmet…
▽ More
We present a search for new phenomena in events with two reconstructed $Z$ bosons and large missing transverse momentum, sensitive to processes $p\bar{p}\rightarrow X_2X_2 \rightarrow Z Z X_1 X_1$, where $X_2$ is an unstable particle decaying as $X_2\rightarrow ZX_1$ and $X_1$ is undetected. The particles $X_1$ and $X_2$ may be, among other possibilities, fourth generation neutrinos or supersymmetric particles. We study the final state in which one $Z$ boson decays to two charged leptons and the second decays hadronically. In data corresponding to an integrated luminosity of 4.2 fb$^{-1}$ from proton-antiproton collisions recorded by the CDF II detector at the Tevatron, with center-of-mass energy of 1.96 TeV, we find agreement between data and standard-model backgrounds. We calculate 95% confidence level upper limits on the cross section of the process $p\bar{p}\rightarrow X_2X_2 \rightarrow Z Z X_1 X_1$ ranging from 50 fb to 1 pb, depending on the masses of $X_1$ and $X_2$.
△ Less
Submitted 7 December, 2011;
originally announced December 2011.
-
Search for a Higgs Boson in the Diphoton Final State in p-pbar Collisions at sqrt(s) = 1.96 TeV
Authors:
CDF Collaboration,
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce
, et al. (490 additional authors not shown)
Abstract:
A search for a narrow Higgs boson resonance in the diphoton mass spectrum is presented based on data corresponding to 7.0 fb^-1 of integrated luminosity from p-pbar collisions at sqrt(s) = 1.96 TeV collected by the CDF experiment. No evidence of such a resonance is observed, and upper limits are set on the cross section times branching ratio of the resonant state as a function of Higgs boson mass.…
▽ More
A search for a narrow Higgs boson resonance in the diphoton mass spectrum is presented based on data corresponding to 7.0 fb^-1 of integrated luminosity from p-pbar collisions at sqrt(s) = 1.96 TeV collected by the CDF experiment. No evidence of such a resonance is observed, and upper limits are set on the cross section times branching ratio of the resonant state as a function of Higgs boson mass. The limits are interpreted in the context of the standard model and one fermiophobic benchmark model where the data exclude fermiophobic Higgs bosons with masses below 114 GeV/c^2 at a 95% Bayesian credibility level.
△ Less
Submitted 21 December, 2011; v1 submitted 20 September, 2011;
originally announced September 2011.
-
Search for WZ+ZZ production with MET + jets with b enhancement at sqrt(s) = 1.96 TeV
Authors:
CDF Collaboration,
T. Aaltonen,
B. Álvarez Gonzálezv,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barriaee,
P. Bartos,
M. Baucecc
, et al. (491 additional authors not shown)
Abstract:
Diboson production ($WW+WZ+ZZ$) has been observed at the Tevatron in hadronic decay modes dominated by the $WW$ process. This paper describes the measurement of the cross section of $WZ$ and $ZZ$ events in final states with large $\mett$ and using $b$-jet identification as a tool to suppress $WW$ contributions. Due to the limited energy resolution, we cannot distinguish between partially hadronic…
▽ More
Diboson production ($WW+WZ+ZZ$) has been observed at the Tevatron in hadronic decay modes dominated by the $WW$ process. This paper describes the measurement of the cross section of $WZ$ and $ZZ$ events in final states with large $\mett$ and using $b$-jet identification as a tool to suppress $WW$ contributions. Due to the limited energy resolution, we cannot distinguish between partially hadronic decays of $WZ$ and $ZZ$, and we measure the sum of these processes. The number of signal events is extracted using a simultaneous fit to the invariant mass distribution of the two jets for events with two $b$-jet candidates and events without two $b$-jet candidates. We measure a cross section $σ(p\bar{p}\to WZ,ZZ) = 5.8^{+3.6}_{-3.0}$ pb, in agreement with the standard model.
△ Less
Submitted 13 January, 2012; v1 submitted 9 August, 2011;
originally announced August 2011.
-
Measurement of the top-quark mass in the lepton+jets channel using a matrix element technique with the CDF II detector
Authors:
CDF Collaboration,
T. Aaltonen,
B. Álvarez Gonzálezv,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barriaee,
P. Bartos,
M. Baucecc
, et al. (490 additional authors not shown)
Abstract:
A measurement of the top-quark mass is presented using Tevatron data from proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV collected with the CDF II detector. Events are selected from a sample of candidates for production of $t\bar t$ pairs that decay into the lepton+jets channel. The top-quark mass is measured with an unbinned maximum likelihood method where the event pro…
▽ More
A measurement of the top-quark mass is presented using Tevatron data from proton-antiproton collisions at center-of-mass energy $\sqrt{s}=1.96$ TeV collected with the CDF II detector. Events are selected from a sample of candidates for production of $t\bar t$ pairs that decay into the lepton+jets channel. The top-quark mass is measured with an unbinned maximum likelihood method where the event probability density functions are calculated using signal and background matrix elements, as well as a set of parameterized jet-to-parton transfer functions. The likelihood function is maximized with respect to the top-quark mass, the signal fraction in the sample, and a correction to the jet energy scale (JES) calibration of the calorimeter jets. The simultaneous measurement of the JES correction ($\JES$) amounts to an additional \textit{in situ} jet energy calibration based on the known mass of the hadronically decaying $W$ boson. Using the data sample of 578 lepton+jets candidate events, corresponding to 3.2 $fb^{-1}$ of integrated luminosity, the top-quark mass is measured to be $m_t = \rm 172.4 \pm 1.4\:(stat+\JES) \pm 1.3\:(syst) GeV/{\it c}^2$.
△ Less
Submitted 21 September, 2011; v1 submitted 8 August, 2011;
originally announced August 2011.
-
Search for a Heavy Top-Like Quark in p\bar{p} Collisions at {\surd}s = 1.96 TeV
Authors:
CDF Collaboration,
T. Aaltonen,
B. Álvarez Gonzálezv,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barriaee,
P. Bartos,
M. Baucecc
, et al. (490 additional authors not shown)
Abstract:
We present the results of a search for pair production of a heavy top-like (t') quark decaying to Wq final states using data corresponding to an integrated luminosity of 5.6 fb-1 collected by the CDF II detector in pp collisions at {\surd}s = 1.96 TeV. We perform parallel searches for t' \to Wb and t' \to Wq (where q is a generic down-type quark) in events containing a lepton and four or more jets…
▽ More
We present the results of a search for pair production of a heavy top-like (t') quark decaying to Wq final states using data corresponding to an integrated luminosity of 5.6 fb-1 collected by the CDF II detector in pp collisions at {\surd}s = 1.96 TeV. We perform parallel searches for t' \to Wb and t' \to Wq (where q is a generic down-type quark) in events containing a lepton and four or more jets. By performing a fit to the two-dimensional distribution of total transverse energy versus reconstructed t quark mass, we set upper limits on the t \bar{t} production cross section and exclude a standard model fourth-generation t' quark decaying to W b (W q) with mass below 358 (340) GeV/c2 at 95% CL.
△ Less
Submitted 4 November, 2011; v1 submitted 19 July, 2011;
originally announced July 2011.
-
Measurement of branching ratio and Bs0 lifetime in the decay Bs0 -> J/psi f0(980) at CDF
Authors:
CDF Collaboration,
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce
, et al. (490 additional authors not shown)
Abstract:
We present a study of Bs0 decays to the CP-odd final state J/psi f0(980) with J/psi -> mu+ mu- and f0(980) -> pi+ pi-. Using ppbar collision data with an integrated luminosity of 3.8/fb collected by the CDF II detector at the Tevatron we measure a Bs0 lifetime of tau(Bs0 -> J/psi f0(980)) = 1.70 -0.11+0.12(stat) +-0.03(syst) ps. This is the first measurement of the Bs0 lifetime in a decay to a CP…
▽ More
We present a study of Bs0 decays to the CP-odd final state J/psi f0(980) with J/psi -> mu+ mu- and f0(980) -> pi+ pi-. Using ppbar collision data with an integrated luminosity of 3.8/fb collected by the CDF II detector at the Tevatron we measure a Bs0 lifetime of tau(Bs0 -> J/psi f0(980)) = 1.70 -0.11+0.12(stat) +-0.03(syst) ps. This is the first measurement of the Bs0 lifetime in a decay to a CP eigenstate and corresponds in the standard model to the lifetime of the heavy Bs0 eigenstate. We also measure the product of branching fractions of Bs0 -> J/psi f0(980) and f0(980) -> pi+ pi- relative to the product of branching fractions of Bs0 -> J/psi phi and phi -> K+ K- to be R_f0/phi = 0.257 +_0.020(stat) +-0.014(syst), which is the most precise determination of this quantity to date.
△ Less
Submitted 12 September, 2011; v1 submitted 18 June, 2011;
originally announced June 2011.
-
Measurement of the Top Pair Production Cross Section in the Lepton + Jets Channel Using a Jet Flavor Discriminant
Authors:
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce,
G. Bauer
, et al. (491 additional authors not shown)
Abstract:
We present a new method to measure the top quark pair production cross section and the background rates with 2.7 fb$^{-1}$ of data from $p\bar{p}$ collisions at $\sqrt{s} =1.96$ TeV collected with the CDF II Detector. The size of the dataset was chosen to directly show the improvements of this new method. We select events with a single electron or muon, missing transverse energy, and at least one…
▽ More
We present a new method to measure the top quark pair production cross section and the background rates with 2.7 fb$^{-1}$ of data from $p\bar{p}$ collisions at $\sqrt{s} =1.96$ TeV collected with the CDF II Detector. The size of the dataset was chosen to directly show the improvements of this new method. We select events with a single electron or muon, missing transverse energy, and at least one b-tagged jet. We perform a simultaneous fit to a jet flavor discriminant across nine samples defined by the number of jets and b-tags. We measure a top cross section of $σ_{t\bar{t}} = 7.64 \pm 0.57 \mathrm{(stat + syst)} \pm 0.45 \mathrm{(luminosity)}$ pb. An advantage of this approach is that many systematic uncertainties are measured in situ and inversely scale with integrated luminosity.
△ Less
Submitted 20 September, 2011; v1 submitted 24 March, 2011;
originally announced March 2011.
-
Search for New Dielectron Resonances and Randall-Sundrum Gravitons at the Collider Detector at Fermilab
Authors:
T. Aaltonen,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
J. A. Appel,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
B. Auerbach,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
M. Bauce,
G. Bauer
, et al. (489 additional authors not shown)
Abstract:
A search for new dielectron mass resonances using data recorded by the CDF II detector and corresponding to an integrated luminosity of 5.7/fb is presented. No significant excess over the expected standard model prediction is observed. In this dataset, an event with the highest dielectron mass ever observed (960 GeV/c^2) was recorded. The results are interpreted in the Randall-Sundrum (RS) model.…
▽ More
A search for new dielectron mass resonances using data recorded by the CDF II detector and corresponding to an integrated luminosity of 5.7/fb is presented. No significant excess over the expected standard model prediction is observed. In this dataset, an event with the highest dielectron mass ever observed (960 GeV/c^2) was recorded. The results are interpreted in the Randall-Sundrum (RS) model. Combined with the 5.4/fb diphoton analysis, the RS-graviton lower mass limit for the coupling k/\bar{M}_{Pl}=0.1 is 1058 GeV/c^2, making it the strongest limit to date.
△ Less
Submitted 6 June, 2011; v1 submitted 23 March, 2011;
originally announced March 2011.
-
Studying the Underlying Event in Drell-Yan and High Transverse Momentum Jet Production at the Tevatron
Authors:
The CDF Collaboration,
T. Aaltonen,
J. Adelman,
B. Alvarez Gonzalez,
S. Amerio,
D. Amidei,
A. Anastassov,
A. Annovi,
J. Antos,
G. Apollinari,
A. Apresyan,
T. Arisawa,
A. Artikov,
J. Asaadi,
W. Ashmanskas,
A. Attal,
A. Aurisano,
F. Azfar,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
P. Barria,
P. Bartos,
G. Bauer
, et al. (554 additional authors not shown)
Abstract:
We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |η| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We u…
▽ More
We study the underlying event in proton-antiproton collisions by examining the behavior of charged particles (transverse momentum pT > 0.5 GeV/c, pseudorapidity |η| < 1) produced in association with large transverse momentum jets (~2.2 fb-1) or with Drell-Yan lepton-pairs (~2.7 fb-1) in the Z-boson mass region (70 < M(pair) < 110 GeV/c2) as measured by CDF at 1.96 TeV center-of-mass energy. We use the direction of the lepton-pair (in Drell-Yan production) or the leading jet (in high-pT jet production) in each event to define three regions of η-φspace; toward, away, and transverse, where φis the azimuthal scattering angle. For Drell-Yan production (excluding the leptons) both the toward and transverse regions are very sensitive to the underlying event. In high-pT jet production the transverse region is very sensitive to the underlying event and is separated into a MAX and MIN transverse region, which helps separate the hard component (initial and final-state radiation) from the beam-beam remnant and multiple parton interaction components of the scattering. The data are corrected to the particle level to remove detector effects and are then compared with several QCD Monte-Carlo models. The goal of this analysis is to provide data that can be used to test and improve the QCD Monte-Carlo models of the underlying event that are used to simulate hadron-hadron collisions.
△ Less
Submitted 16 March, 2010;
originally announced March 2010.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
Search for First-Generation Scalar Leptoquarks in $\bm{p \bar{p}}$ collisions at $\sqrt{s}$=1.96 TeV
Authors:
The CDF Collaboration,
D. Acosta,
J. Adelman,
T. Affolder,
T. Akimoto,
M. G. Albrow,
D. Ambrose,
S. Amerio,
D. Amidei,
A. Anastassov,
K. Anikeev,
A. Annovi,
J. Antos,
M. Aoki,
G. Apollinari,
T. Arisawa,
J-F. Arguin,
A. Artikov,
W. Ashmanskas,
A. Attal,
F. Azfar,
P. Azzi-Bacchetta,
N. Bacchetta,
H. Bachacou,
W. Badgett
, et al. (605 additional authors not shown)
Abstract:
We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L.…
▽ More
We report on a search for pair production of first-generation scalar leptoquarks ($LQ$) in $p \bar{p}$ collisions at $\sqrt{s}$=1.96 TeV using an integrated luminosity of 203 $pb^{-1}$ collected at the Fermilab Tevatron collider by the CDF experiment. We observe no evidence for $LQ$ production in the topologies arising from $LQ \bar{LQ} \to eqeq$ and $LQ \bar{LQ} \to eq νq$, and derive 95% C.L. upper limits on the $LQ$ production cross section. %as a function of $β$, where $β$ is the branching fraction for $LQ \to eq$. The results are combined with those obtained from a separately reported CDF search in the topology arising from $LQ\bar{LQ} \to νq νq$ and 95% C.L. lower limits on the LQ mass as a function of $β= BR(LQ \to eq) $ are derived. The limits are 236, 205 and 145 GeV/c$^2$ for $β$ = 1, $β$ = 0.5 and $β$ = 0.1, respectively.
△ Less
Submitted 29 June, 2005;
originally announced June 2005.
-
Comparison of Three-jet Events in Proton-Antiproton Collisions at Center-of-mass Energy 1.8 TeV to Predictions from a Next-to-leading Order QCD Calculation
Authors:
D. Acosta,
T. Affolder,
M. G. Albrow,
D. Ambrose,
D. Amidei,
K. Anikeev,
J. Antos,
G. Apollinari,
T. Arisawa,
A. Artikov,
W. Ashmanskas,
F. Azfar,
P. Azzi-Bacchetta,
N. Bacchetta,
H. Bachacou,
W. Badgett,
A. Barbaro-Galtieri,
V. E. Barnes,
B. A. Barnett,
S. Baroiant,
M. Barone,
G. Bauer,
F. Bedeschi,
S. Behari,
S. Belforte
, et al. (388 additional authors not shown)
Abstract:
The properties of three-jet events with total transverse energy greater than 320 GeV and individual jet energy greater than 20 GeV have been analyzed and compared to absolute predictions from a next-to-leading order (NLO) perturbative QCD calculation. These data, of integrated luminosity 86 pb^-1, were recorded by the CDF Experiment for proton-antiproton collisions at sqrt{s}=1.8 TeV. This study…
▽ More
The properties of three-jet events with total transverse energy greater than 320 GeV and individual jet energy greater than 20 GeV have been analyzed and compared to absolute predictions from a next-to-leading order (NLO) perturbative QCD calculation. These data, of integrated luminosity 86 pb^-1, were recorded by the CDF Experiment for proton-antiproton collisions at sqrt{s}=1.8 TeV. This study tests a model of higher order QCD processes that result in gluon emission and can be used to estimate the magnitude of the contribution of processes higher than NLO. The total cross section is measured to be 466 +/- 3(stat.)^{+207}_{-70}(syst.) pb. The differential cross section is furthermore measured for all kinematically accessible regions of the Dalitz plane, including those for which the theoretical prediction is unreliable. While the measured cross section is consistent with the theoretical prediction in magnitude, the two differ somewhat in shape in the Dalitz plane.
△ Less
Submitted 6 October, 2004;
originally announced October 2004.