-
Parallel transport modeling of linear divertor simulators with fundamental ion cyclotron heating
Authors:
A. Kumar,
J. F. Caneses-Marin,
C. Lau,
R. Goulding
Abstract:
The Material Plasma Exposure eXperiment (MPEX) is a steady state linear device with the goal to perform plasma material interaction (PMI) studies at future fusion reactor relevant conditions. A prototype of MPEX referred as Porto-MPEX is designed to carry out research and development related to source, heating and transport concepts on the planned full MPEX device. The auxiliary heating schemes in…
▽ More
The Material Plasma Exposure eXperiment (MPEX) is a steady state linear device with the goal to perform plasma material interaction (PMI) studies at future fusion reactor relevant conditions. A prototype of MPEX referred as Porto-MPEX is designed to carry out research and development related to source, heating and transport concepts on the planned full MPEX device. The auxiliary heating schemes in MPEX are based on cyclotron resonance heating with radio frequency (RF) waves. Ion cyclotron heating (ICH) and electron cyclotron heating (ECH) in MPEX are used to independently heat the ions and electrons and provide fusion divertor conditions ranging from sheath-limited to fully detached divertor regimes at a material target. A Hybrid Particle-In-Cell code- PICOS++ is developed and applied to understand the plasma parallel transport during ICH heating in MPEX Proto-MPEX to the target. With this tool, evolution of the distribution function of MPEX/Proto-MPEX ions is modeled in the presence of (1) Coulomb collisions, (2) volumetric particle sources and (3) quasi-linear RF-based ICH. The code is benchmarked against experimental data from Proto-MPEX and simulation data from B2.5 EIRENE. The experimental observation of density-drop near the target in Proto-MPEX and MPEX during ICH heating is demonstrated and explained via physics-based arguments using PICOS++ modeling. In fact, the density drops at the target during ICH in Proto-MPEX/MPEX to conserve the flux and to compensate for the increased flow during ICH. Furthermore, sensitivity scans of various plasma parameters with respect to ICH power are performed for MPEX to investigate its role on plasma transport and particle and energy fluxes at the target. Finally, we discuss the pathway to model ECH in MPEX using the Hybrid PIC formulation herein presented for kinetic electrons and fluid ions.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
Power transport efficiency during O-X-B 2nd harmonic electron cyclotron heating in a helicon linear plasma device
Authors:
J. F. Caneses Marin,
C. L. Lau,
R. H. Goulding,
T. Bigelow,
T. Biewer,
J. B. O. Caughman,
J. Rapp
Abstract:
The principal objective of this work is to report on the power coupled to a tungsten target in the Proto-MPEX device during oblique injection of a microwave beam (< 70 kW at 28 GHz) into a high-power (~100 kW at 13.56 MHz) over-dense (n_e>1E10^19 m^(-3)) deuterium helicon plasma column. The experimental setup, electron heating system, electron heating scheme, and IR thermographic diagnostic for qu…
▽ More
The principal objective of this work is to report on the power coupled to a tungsten target in the Proto-MPEX device during oblique injection of a microwave beam (< 70 kW at 28 GHz) into a high-power (~100 kW at 13.56 MHz) over-dense (n_e>1E10^19 m^(-3)) deuterium helicon plasma column. The experimental setup, electron heating system, electron heating scheme, and IR thermographic diagnostic for quantifying the power transport is described in detail. It is demonstrated that the power transported to the target can be effectively controlled by adjusting the magnetic field profile. Using this method, heat fluxes up to 22 MWm-2 and power transport efficiencies in the range of 17-20% have been achieved using 70 kW of microwave power. It is observed that most of the heat flux is confined to a narrow region at the plasma periphery. Ray-tracing calculations are presented which indicate that the power is coupled to the plasma electrons via an O-X-B mode conversion process. Calculations indicate that the microwave power is absorbed in a single pass at the plasma periphery via collisions and in the over-dense region via 2nd harmonic cyclotron resonance of the electron Bernstein wave. The impact of these results is discussed in the context of MPEX.
△ Less
Submitted 7 January, 2022; v1 submitted 4 October, 2021;
originally announced October 2021.
-
PISCES-RF: a liquid-cooled high-power steady-state helicon plasma device
Authors:
Saikat Chakraborty Thakur,
Michael J. Simmonds,
Juan F. Caneses,
Fengjen Chang,
Eric M. Hollmann Russell P. Doerner,
Richard Goulding,
Arnold Lumsdaine,
Juergen Rapp,
George R. Tynan
Abstract:
Radio-frequency (RF) driven helicon plasma sources can produce relatively high-density plasmas (n > 10^19 m-3) at relatively moderate powers (< 2 kW) in argon. However, to produce similar high-density plasmas for fusion relevant gases such as hydrogen, deuterium and helium, much higher RF powers are needed. For very high RF powers, thermal issues of the RF-transparent dielectric window, used in th…
▽ More
Radio-frequency (RF) driven helicon plasma sources can produce relatively high-density plasmas (n > 10^19 m-3) at relatively moderate powers (< 2 kW) in argon. However, to produce similar high-density plasmas for fusion relevant gases such as hydrogen, deuterium and helium, much higher RF powers are needed. For very high RF powers, thermal issues of the RF-transparent dielectric window, used in the RF source design, limit the plasma operation timescales. To mitigate this constraint, we have designed, built and tested a novel liquid-cooled RF window which allows steady state operations at high power (up to 20 kW). De-ionized (DI) water, flowing between two concentric dielectric RF windows, is used as the coolant. We show that a full azimuthal blanket of DI water does not degrade plasma production. We obtain steady-state, high-density plasmas (n > 10^19 m-3, T_e ~ 5 eV) using both argon and hydrogen. From calorimetry on the DI water, we measure the net heat that is being removed by the coolant at steady state conditions. Using infra-red (IR) imaging, we calculate the constant plasma heat deposition and measure the final steady state temperature distribution patterns on the inner surface of the ceramic layer. We find that the heat deposition pattern follows the helical shape of the antenna. We also show the consistency between the heat absorbed by the DI water, as measured by calorimetry, and the total heat due to the combined effect of the plasma heating and the absorbed RF. These results are being used to answer critical engineering questions for the 200 kW RF device (MPEX: Materials Plasma Exposure eXperiment) being designed at the Oak Ridge National Laboratory (ORNL) as a next generation plasma material interaction (PMI) device.
△ Less
Submitted 29 December, 2020; v1 submitted 22 May, 2020;
originally announced May 2020.
