-
Neutron Yield of Thermo Scientific P385 D-T Neutron Generator vs. Current and Voltage
Authors:
Jihye Jeon,
Robert J. Goldston,
Erik P. Gilson
Abstract:
The Thermo Scientific P385 Neutron Generator is a compact neutron source, producing 14 MeV neutrons through the deuterium-tritium (DT) fusion reaction. For practical use, it is important to measure and preferably understand the dependence of the neutron production rate on the accelerator current and voltage. In this study, we evaluated neutron production with a neutron spectrometer (BTI N-Probe),…
▽ More
The Thermo Scientific P385 Neutron Generator is a compact neutron source, producing 14 MeV neutrons through the deuterium-tritium (DT) fusion reaction. For practical use, it is important to measure and preferably understand the dependence of the neutron production rate on the accelerator current and voltage. In this study, we evaluated neutron production with a neutron spectrometer (BTI N-Probe), a He-3 detector surrounded by HDPE shells (Nested Neutron Spectrometer, NNS), and two ZnS fast neutron scintillators (EJ-410) for both P385 A3082 and A3083 sealed tubes. We also predicted the neutron yield using the TRIM code, which calculates the trajectory and the energy loss of deuterons and tritons within the target. Experimental and theoretical results showed a linear dependence on beam current and a $\sim$3.5 power law dependence on the operating voltage. A series of NNS measurements, neutron spectrum from N-Probe and MCNP calculation showed that the A3083 and A3082 tubes provide a maximum neutron yield of $\sim 8.2 \times 10^8$ n/s and $\sim 4.5 \times 10^8$ n/s, respectively. We showed that tritium decay was not a significant contributor to this difference.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Predictive Modeling of a Lithium Vapor Box Divertor in NSTX-U using SOLPS-ITER
Authors:
E. D. Emdee,
R. J. Goldston,
J. D Lore,
X. Zhang
Abstract:
The lithium vapor box divertor aims to detach the divertor plasma via evaporating and condensing lithium surfaces. By evaporating lithium near or at the divertor plate and condensing it closer to the main chamber, a lithium vapor density gradient can be created. This density gradient ties energy losses to poloidal distance between the target and the detachment point. The radiation zone is then pre…
▽ More
The lithium vapor box divertor aims to detach the divertor plasma via evaporating and condensing lithium surfaces. By evaporating lithium near or at the divertor plate and condensing it closer to the main chamber, a lithium vapor density gradient can be created. This density gradient ties energy losses to poloidal distance between the target and the detachment point. The radiation zone is then prevented from reaching the X-point as the lithium ionization rate decreases when the detachment front moves away from the divertor target. Here we present Scrape Off Layer Plasma Simulator (SOLPS) simulations of a lithium vapor box divertor using an NSTX-U equilibrium and PFC geometry. The parameters for the core boundary conditions, gas puff intensity, and heat and particle transport coefficients are chosen to match experimental values. Acceptable agreement with experimental Scrape-Off Layer (SOL) widths is found, indicating a reasonable choice of transport coefficients. In predictive simulations, lithium is added via evaporation at the target. Predictions for peak heat fluxes and upstream impurity concentration are given for a variety of evaporation rates. Target electron temperature is predicted to be able to be reduced to recombination levels (below 1 eV) for lithium evaporation rates of $1\cdot10^{23}$ Li/s, indicating detachment. Peak heat flux at the lower outer target could be reduced by as much as a factor of six while maintaining upstream lithium fractions below 2%. The prevention of lithium from reaching the midplane is shown to be due to an increase in frictional forces acting on the lithium from a deuterium gas puff. Lithium is also shown to be redeposited close to the evaporator which is favorable for initial tests and future capillary porous systems.
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Neutron Resonance Transmission Analysis with a Compact Deuterium-Tritium Neutron Generator
Authors:
Ethan A. Klein,
Farheen Naqvi,
Jacob E. Bickus,
Hin Y. Lee,
Robert J. Goldston,
Areg Danagoulian
Abstract:
Neutron Resonance Transmission Analysis (NRTA) is a spectroscopic technique which uses the resonant absorption of neutrons in the epithermal range to infer the isotopic composition of an object. This spectroscopic technique has relevance in many traditional fields of science and nuclear security. NRTA in the past made use of large, expensive accelerator facilities to achieve precise neutron beams,…
▽ More
Neutron Resonance Transmission Analysis (NRTA) is a spectroscopic technique which uses the resonant absorption of neutrons in the epithermal range to infer the isotopic composition of an object. This spectroscopic technique has relevance in many traditional fields of science and nuclear security. NRTA in the past made use of large, expensive accelerator facilities to achieve precise neutron beams, significantly limiting its applicability. In this work we describe a series of NRTA experiments where we use a compact, low-cost deuterium-tritium (DT) neutron generator to produce short neutron beams (2.6~m) along with a $^6$Li-glass neutron detector. The time-of-flight spectral data from five elements -- silver, cadmium, tungsten, indium, and $^{238}$U -- clearly show the corresponding absorption lines in the 1-30 eV range. The experiments show the applicability of NRTA in this simplified configuration, and prove the feasibility of this compact and low-cost approach. This could significantly broaden the applicability of NRTA, and make it practical and applicable in many fields, such as material science, nuclear engineering, and arms control.
△ Less
Submitted 16 April, 2021; v1 submitted 5 December, 2020;
originally announced December 2020.
-
Design and measurement methods for a lithium vapor box similarity experiment
Authors:
Jacob A Schwartz,
Eric D Emdee,
M A Jaworski,
R J Goldston
Abstract:
The lithium vapor box divertor is a concept for handling the extreme divertor heat fluxes in magnetic fusion devices. In a baffled slot divertor, plasma interacts with a dense cloud of Li vapor which radiates and cools the plasma, leading to recombination and detachment. Before testing on a tokamak the concept should be validated: we plan to study detachment and heat redistribution by a Li vapor c…
▽ More
The lithium vapor box divertor is a concept for handling the extreme divertor heat fluxes in magnetic fusion devices. In a baffled slot divertor, plasma interacts with a dense cloud of Li vapor which radiates and cools the plasma, leading to recombination and detachment. Before testing on a tokamak the concept should be validated: we plan to study detachment and heat redistribution by a Li vapor cloud in laboratory experiments. Mass changes and temperatures are measured to validate a Direct Simulation Monte Carlo model of neutral Li. The initial experiment involves a 5 cm diameter steel box containing 10 g of Li held at 650 degrees C as vapor flows out a wide nozzle into a similarly-sized box at a lower temperature. Diagnosis is made challenging by the required material compatibility with lithium vapor. Vapor pressure a steep function of temperature, so to validate mass flow models to within 10%, absolute temperature to within 4.5 K is required. The apparatus is designed to be used with an analytical balance to determine mass transport. Details of the apparatus and methods of temperature and mass flow measurements are presented.
△ Less
Submitted 8 August, 2018;
originally announced August 2018.
-
A physical zero-knowledge object-comparison system for nuclear warhead verification
Authors:
Sébastien Philippe,
Robert J. Goldston,
Alexander Glaser,
Francesco d'Errico
Abstract:
Zero-knowledge proofs are mathematical cryptographic methods to demonstrate the validity of a claim while providing no further information beyond the claim itself. The possibility of using such proofs to process classified and other sensitive physical data has attracted attention, especially in the field of nuclear arms control. Here we demonstrate a non-electronic fast neutron differential radiog…
▽ More
Zero-knowledge proofs are mathematical cryptographic methods to demonstrate the validity of a claim while providing no further information beyond the claim itself. The possibility of using such proofs to process classified and other sensitive physical data has attracted attention, especially in the field of nuclear arms control. Here we demonstrate a non-electronic fast neutron differential radiography technique using superheated emulsion detectors that can confirm that two objects are identical without revealing their geometry or composition. Such a technique could form the basis of a verification system that could confirm the authenticity of nuclear weapons without sharing any secret design information. More broadly, by demonstrating a physical zero-knowledge proof that can compare physical properties of objects, this experiment opens the door to developing other such secure proof-systems for other applications.
△ Less
Submitted 1 December, 2016; v1 submitted 24 February, 2016;
originally announced February 2016.
