-
Coupled resonators based on high permittivity dielectrics for microwave sensors
Authors:
Shahnam Gorgi Zadeh,
Alberto Ghirri,
Sergio Pagano,
Simone Tocci,
Claudio Gatti,
Antonio Cassinese
Abstract:
The use of coupled cavities with high quality factor is of undoubted interest for several applications including those concerning quantum sensing and metrology. Here we report on a coupled cavity configuration in which a high $Q$-factor elliptical TESLA-shaped superconducting cavity is coupled with a high permittivity ($\varepsilon_\mathrm{r}$) dielectric resonator. We carried out first tests usin…
▽ More
The use of coupled cavities with high quality factor is of undoubted interest for several applications including those concerning quantum sensing and metrology. Here we report on a coupled cavity configuration in which a high $Q$-factor elliptical TESLA-shaped superconducting cavity is coupled with a high permittivity ($\varepsilon_\mathrm{r}$) dielectric resonator. We carried out first tests using a SrTiO$_3$ (STO) resonator at 0.1 GHz, whose permittivity has been observed to reach values higher than 30000 a 0.16 K. The sensitivities of such configurations are discussed both in strong coupling and weak coupling regime. In particular we show that the notch of the coupled system has, as a function of the permittivity, a frequency sensitivity of 2.8 MHz for $\varepsilon_\mathrm{r} \approx 230$. These results highlight the potential of the coupled resonator systems as microwave sensors and are useful for the engineering of high permittivity resonators for applications at cryogenic temperatures.
△ Less
Submitted 8 October, 2024;
originally announced October 2024.
-
Transmon qubit modeling and characterization for Dark Matter search
Authors:
R. Moretti,
D. Labranca,
P. Campana,
R. Carobene,
M. Gobbo,
M. A. Castellanos-Beltran,
D. Olaya,
P. F. Hopkins,
L. Banchi,
M. Borghesi,
A. Candido,
H. A. Corti,
A. D'Elia,
M. Faverzani,
E. Ferri,
A. Nucciotti,
L. Origo,
A. Pasquale,
A. S. Piedjou Komnang,
A. Rettaroli,
S. Tocci,
S. Carrazza,
C. Gatti,
A. Giachero
Abstract:
This study presents the design, simulation, and experimental characterization of a superconducting transmon qubit circuit prototype for potential applications in dark matter detection experiments. We describe a planar circuit design featuring two non-interacting transmon qubits, one with fixed frequency and the other flux tunable. Finite-element simulations were employed to extract key Hamiltonian…
▽ More
This study presents the design, simulation, and experimental characterization of a superconducting transmon qubit circuit prototype for potential applications in dark matter detection experiments. We describe a planar circuit design featuring two non-interacting transmon qubits, one with fixed frequency and the other flux tunable. Finite-element simulations were employed to extract key Hamiltonian parameters and optimize component geometries. The qubit was fabricated and then characterized at $20$ mK, allowing for a comparison between simulated and measured qubit parameters. Good agreement was found for transition frequencies and anharmonicities (within 1\% and 10\% respectively) while coupling strengths exhibited larger discrepancies (30\%). We discuss potential causes for measured coherence times falling below expectations ($T_1\sim\,$1-2 \textmu s) and propose strategies for future design improvements. Notably, we demonstrate the application of a hybrid 3D-2D simulation approach for energy participation ratio evaluation, yielding a more accurate estimation of dielectric losses. This work represents an important first step in developing planar Quantum Non-Demolition (QND) single-photon counters for dark matter searches, particularly for axion and dark photon detection schemes.
△ Less
Submitted 22 October, 2024; v1 submitted 9 September, 2024;
originally announced September 2024.
-
Cavity Detection of Gravitational Waves: Where Do We Stand?
Authors:
Claudio Gatti,
Luca Visinelli,
Michael Zantedeschi
Abstract:
High frequency gravitational waves (HFGWs) are predicted in various exotic scenarios involving both cosmological and astrophysical sources. These elusive signals have recently sparked the interest of a diverse community of researchers, due to the possibility of HFGW detection in the laboratory through graviton-photon conversion in strong magnetic fields. Notable examples include the redesign of th…
▽ More
High frequency gravitational waves (HFGWs) are predicted in various exotic scenarios involving both cosmological and astrophysical sources. These elusive signals have recently sparked the interest of a diverse community of researchers, due to the possibility of HFGW detection in the laboratory through graviton-photon conversion in strong magnetic fields. Notable examples include the redesign of the resonant cavities currently under development to detect the cosmic axion. In this work, we derive the sensitivities of some existing and planned resonant cavities to detect a HFGW background. As a concrete scenario, we consider the collective signals that originate from the merging of compact objects, such as two primordial black holes (PBHs) in the asteroid mass window. Our findings improve over existing work by explicitly discussing and quantifying the loss in the experimental reach due to the actual coherence of the source. We elucidate on the approach we adopt in relation with recent literature on the topic. Most notably, we give a recipe for the estimate of the stochastic background that focuses on the presence of the signal in the cavity at all times and showing that, in the relevant PBH mass region, the signal is dominated by coherent binary mergers.
△ Less
Submitted 15 September, 2024; v1 submitted 27 March, 2024;
originally announced March 2024.
-
Nonlinear Behavior of Josephson Traveling Wave Parametric Amplifiers
Authors:
Claudio Guarcello,
Felix Ahrens,
Guerino Avallone,
Carlo Barone,
Matteo Borghesi,
Luca Callegaro,
Giovanni Carapella,
Anna Paola Caricato,
Iacopo Carusotto,
Alessandro Cian,
Alessandro D'Elia,
Daniele Di Gioacchino,
Emanuele Enrico,
Paolo Falferi,
Luca Fasolo,
Marco Faverzani,
Elena Ferri,
Giovanni Filatrella,
Claudio Gatti,
Andrea Giachero,
Damiano Giubertoni,
Veronica Granata,
Angelo Leo,
Danilo Labranca,
Carlo Ligi
, et al. (18 additional authors not shown)
Abstract:
Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providin…
▽ More
Recent advancements in quantum technologies and advanced detection experiments have underscored the pressing need for the detection of exceedingly weak signals within the microwave frequency spectrum. Addressing this challenge, the Josephson Traveling Wave Parametric Amplifier (JTWPA) has been proposed as a cryogenic front-end amplifier capable of approaching the quantum noise limit while providing a relevant bandwidth. This research is centered on a comprehensive numerical investigation of the JTWPA, without resorting to simplifications regarding the nonlinearity of the essential components. Specifically, this study focuses on a thorough examination of the system, characterized by coupled nonlinear differential equations representing all components of the device. Proper input and output signals at the device's boundaries are considered. The analysis of the output signals undergoing the parametric amplification process involves a detailed exploration of phase-space dynamics and Fourier spectral analysis of the output voltage. This study is conducted while considering the parameters ruling the response of the device under pump and signal excitations. In addition to the expected signal amplification, the findings reveal that the nonlinear nature of the system can give rise to unforeseen phenomena, depending on the system's operational conditions, which include: the generation of pump tone harmonics, modulation of the signal gain, and incommensurate frequency generation-effects that are not easily accommodated by simplistic linearized approaches
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
Search for Axion dark matter with the QUAX-LNF tunable haloscope
Authors:
A. Rettaroli,
D. Alesini,
D. Babusci,
C. Braggio,
G. Carugno,
D. D'Agostino,
A. D'Elia,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
U. Gambardella,
A. Gardikiotis,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
G. Ruoso,
S. Tocci,
G. Vidali
Abstract:
We report the first experimental results obtained with the new haloscope of the QUAX experiment located at Laboratori Nazionali di Frascati of INFN (LNF). The haloscope is composed of a OFHC Cu resonant cavity cooled down to about 30 mK and immersed in a magnetic field of 8 T. The cavity frequency was varied in a 6 MHz range between 8.831496 and 8.83803 GHz. This corresponds to a previously unprob…
▽ More
We report the first experimental results obtained with the new haloscope of the QUAX experiment located at Laboratori Nazionali di Frascati of INFN (LNF). The haloscope is composed of a OFHC Cu resonant cavity cooled down to about 30 mK and immersed in a magnetic field of 8 T. The cavity frequency was varied in a 6 MHz range between 8.831496 and 8.83803 GHz. This corresponds to a previously unprobed mass range between 36.52413 and 36.5511 $μ$eV. We don't observe any excess in the power spectrum and set limits on the axion-photon coupling in this mass range down to $g_{aγγ} < 0.861 \times 10^{-13}$ GeV$^{-1}$ with the confidence level set at $90\%$.
△ Less
Submitted 15 May, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
Development of KI-TWPAs for the DARTWARS project
Authors:
Felix Ahrens,
Elena Ferri,
Guerino Avallone,
Carlo Barone,
Matteo Borghesi,
Luca Callegaro,
Giovanni Carapella,
Anna Paola Caricato,
Iacopo Carusotto,
Alessandro Cian,
Alessandro D'Elia,
Daniele Di Gioacchino,
Emanuele Enrico,
Paolo Falferi,
Luca Fasolo,
Marco Faverzani,
Giovanni Filatrella,
Claudio Gatti,
Andrea Giachero,
Damiano Giubertoni,
Veronica Granata,
Claudio Guarcello,
Danilo Labranca,
Angelo Leo,
Carlo Ligi
, et al. (18 additional authors not shown)
Abstract:
Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit…
▽ More
Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments for neutrino mass measurements, dark matter searches and Cosmic Microwave Background (CMB) measurements as well as for fast high-fidelity read-out of superconducting qubits. In the last years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels close to the quantum limit, but due to their narrow bandwidth, only few detectors or qubits per line can be read out in parallel. An alternative and innovative solution is based on superconducting parametric amplification exploiting the travelling-wave concept. Within the DARTWARS (Detector Array Readout with Travelling Wave AmplifieRS) project, we develop Kinetic Inductance Travelling-Wave Parametric Amplifiers (KI-TWPAs) for low temperature detectors and qubit read-out. KI-TWPAs are typically operated in a threewave mixing (3WM) mode and are characterised by a high gain, a high saturation power, a large amplification bandwidth and nearly quantum limited noise performance. The goal of the DARTWARS project is to optimise the KI-TWPA design, explore new materials, and investigate alternative fabrication processes in order to enhance the overall performance of the amplifier. In this contribution we present the advancements made by the DARTWARS collaboration to produce a working prototype of a KI-TWPA, from the fabrication to the characterisation.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Broadband parametric amplification in DARTWARS
Authors:
Marco Faverzani,
Pietro Campana,
Rodolfo Carobene,
Marco Gobbo,
Felix Ahrens,
Guerino Avallone,
Carlo Barone,
Matteo Borghesi,
Silvia Capelli,
Giovanni Carapella,
Anna Paola Caricato,
Luca Callegaro,
Iacopo Carusotto,
Andrea Celotto,
Alessandro Cian,
Alessandro D'Elia,
Daniele Di Gioacchino,
Emanuele Enrico,
Paolo Falferi,
Luca Fasolo,
Elena Ferri,
Giovanni Filatrella,
Claudio Gatti,
Damiano Giubertoni,
Veronica Granata
, et al. (24 additional authors not shown)
Abstract:
Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (T…
▽ More
Superconducting parametric amplifiers offer the capability to amplify feeble signals with extremely low levels of added noise, potentially reaching quantum-limited amplification. This characteristic makes them essential components in the realm of high-fidelity quantum computing and serves to propel advancements in the field of quantum sensing. In particular, Traveling-Wave Parametric Amplifiers (TWPAs) may be especially suitable for practical applications due to their multi-Gigahertz amplification bandwidth, a feature lacking in Josephson Parametric Amplifiers (JPAs), despite the latter being a more established technology. This paper presents recent developments of the DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project, focusing on the latest prototypes of Kinetic Inductance TWPAs (KITWPAs). The project aims to develop a KITWPA capable of achieving $20\,$ dB of amplification. To enhance the production yield, the first prototypes were fabricated with half the length and expected gain of the final device. In this paper, we present the results of the characterization of one of the half-length prototypes. The measurements revealed an average amplification of approximately $9\,$dB across a $2\,$GHz bandwidth for a KITWPA spanning $17\,$mm in length.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Characterization of a Transmon Qubit in a 3D Cavity for Quantum Machine Learning and Photon Counting
Authors:
Alessandro D'Elia,
Boulos Alfakes,
Anas Alkhazaleh,
Leonardo Banchi,
Matteo Beretta,
Stefano Carrazza,
Fabio Chiarello,
Daniele Di Gioacchino,
Andrea Giachero,
Felix Henrich,
Alex Stephane Piedjou Komnang,
Carlo Ligi,
Giovanni Maccarrone,
Massimo Macucci,
Emanuele Palumbo,
Andrea Pasquale,
Luca Piersanti,
Florent Ravaux,
Alessio Rettaroli,
Matteo Robbiati,
Simone Tocci,
Claudio Gatti
Abstract:
In this paper we report the use of superconducting transmon qubit in a 3D cavity for quantum machine learning and photon counting applications. We first describe the realization and characterization of a transmon qubit coupled to a 3D resonator, providing a detailed description of the simulation framework and of the experimental measurement of important parameters, like the dispersive shift and th…
▽ More
In this paper we report the use of superconducting transmon qubit in a 3D cavity for quantum machine learning and photon counting applications. We first describe the realization and characterization of a transmon qubit coupled to a 3D resonator, providing a detailed description of the simulation framework and of the experimental measurement of important parameters, like the dispersive shift and the qubit anharmonicity. We then report on a Quantum Machine Learning application implemented on the single-qubit device to fit the u-quark parton distribution function of the proton. In the final section of the manuscript we present a new microwave photon detection scheme based on two qubits coupled to the same 3D resonator. This could in principle decrease the dark count rate, favouring applications like axion dark matter searches.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Design and simulation of a transmon qubit chip for Axion detection
Authors:
Roberto Moretti,
Hervè Atsè Corti,
Danilo Labranca,
Felix Ahrens,
Guerino Avallone,
Danilo Babusci,
Leonardo Banchi,
Carlo Barone,
Matteo Mario Beretta,
Matteo Borghesi,
Bruno Buonomo,
Enrico Calore,
Giovanni Carapella,
Fabio Chiarello,
Alessandro Cian,
Alessando Cidronali,
Filippo Costa,
Alessandro Cuccoli,
Alessandro D'Elia,
Daniele Di Gioacchino,
Stefano Di Pascoli,
Paolo Falferi,
Marco Fanciulli,
Marco Faverzani,
Giulietto Felici
, et al. (32 additional authors not shown)
Abstract:
Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity im…
▽ More
Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity improvements and dark count rate suppression in experiments based on high-precision microwave photon detection, such as for Axions and Dark Photons search. In this context, the INFN Qub-IT project goal is to realize an itinerant single-photon counter based on superconducting qubits that will exploit QND for enhancing Axion search experiments. In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device, illustrating design and simulation procedures and the characterization of fabricated Coplanar Waveguide Resonators (CPWs) for readout. We match target qubit parameters and assess a few-percent level agreement between lumped and distributed element simulation models. We reach a maximum internal quality factor of 9.2x10^5 for -92 dBm on-chip readout power.
△ Less
Submitted 25 January, 2024; v1 submitted 8 October, 2023;
originally announced October 2023.
-
The future search for low-frequency axions and new physics with the FLASH resonant cavity experiment at Frascati National Laboratories
Authors:
David Alesini,
Danilo Babusci,
Paolo Beltrame,
Fabio Bossi,
Paolo Ciambrone,
Alessandro D'Elia,
Daniele Di Gioacchino,
Giampiero Di Pirro,
Babette Döbrich,
Paolo Falferi,
Claudio Gatti,
Maurizio Giannotti,
Paola Gianotti,
Gianluca Lamanna,
Carlo Ligi,
Giovanni Maccarrone,
Giovanni Mazzitelli,
Alessandro Mirizzi,
Michael Mueck,
Enrico Nardi,
Federico Nguyen,
Alessio Rettaroli,
Javad Rezvani,
Francesco Enrico Teofilo,
Simone Tocci
, et al. (3 additional authors not shown)
Abstract:
We present a proposal for a new experiment, the FINUDA magnet for Light Axion SearcH (FLASH), a large resonant-cavity haloscope in a high static magnetic field which is planned to probe new physics in the form of dark matter (DM) axions, scalar fields, chameleons, hidden photons, as well as high frequency gravitational waves (GWs). Concerning the QCD axion, FLASH will search for these particles as…
▽ More
We present a proposal for a new experiment, the FINUDA magnet for Light Axion SearcH (FLASH), a large resonant-cavity haloscope in a high static magnetic field which is planned to probe new physics in the form of dark matter (DM) axions, scalar fields, chameleons, hidden photons, as well as high frequency gravitational waves (GWs). Concerning the QCD axion, FLASH will search for these particles as the DM in the mass range (0.49-1.49) ueV, thus filling the mass gap between the ranges covered by other planned searches. A dedicated Microstrip SQUID operating at ultra-cryogenic temperatures will amplify the signal. The frequency range accessible overlaps with the Very High Frequency (VHF) range of the radio wave spectrum and allows for a search in GWs in the frequency range (100-300) MHz. The experiment will make use of the cryogenic plant and magnet of the FINUDA experiment at INFN Frascati National Laboratories near Rome (Italy); the operations needed to restore the functionalities of the apparatus are currently underway. We present the setup of the experiment and the sensitivity forecasts for the detection of axions, scalar fields, chameleons, hidden photons, and GWs.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
Feebly Interacting Particles: FIPs 2022 workshop report
Authors:
C. Antel,
M. Battaglieri,
J. Beacham,
C. Boehm,
O. Buchmüller,
F. Calore,
P. Carenza,
B. Chauhan,
P. Cladè,
P. Coloma,
P. Crivelli,
V. Dandoy,
L. Darmé,
B. Dey,
F. F. Deppisch,
A. De Roeck,
M. Drewes,
B. Echenard,
V. V. Flambaum,
P. Foldenauer,
C. Gatti,
M. Giannotti,
A. Golutvin,
M. C. Gonzalez-Garcia,
S. Gori
, et al. (53 additional authors not shown)
Abstract:
Particle physics today faces the challenge of explaining the mystery of dark matter, the origin of matter over anti-matter in the Universe, the origin of the neutrino masses, the apparent fine-tuning of the electro-weak scale, and many other aspects of fundamental physics. Perhaps the most striking frontier to emerge in the search for answers involves new physics at mass scales comparable to famil…
▽ More
Particle physics today faces the challenge of explaining the mystery of dark matter, the origin of matter over anti-matter in the Universe, the origin of the neutrino masses, the apparent fine-tuning of the electro-weak scale, and many other aspects of fundamental physics. Perhaps the most striking frontier to emerge in the search for answers involves new physics at mass scales comparable to familiar matter, below the GeV-scale, or even radically below, down to sub-eV scales, and with very feeble interaction strength. New theoretical ideas to address dark matter and other fundamental questions predict such feebly interacting particles (FIPs) at these scales, and indeed, existing data provide numerous hints for such possibility. A vibrant experimental program to discover such physics is under way, guided by a systematic theoretical approach firmly grounded on the underlying principles of the Standard Model. This document represents the report of the FIPs 2022 workshop, held at CERN between the 17 and 21 October 2022 and aims to give an overview of these efforts, their motivations, and the decadal goals that animate the community involved in the search for FIPs.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Search for galactic axions with a traveling wave parametric amplifier
Authors:
R. Di Vora,
A. Lombardi,
A. Ortolan,
R. Pengo,
G. Ruoso,
C. Braggio,
G. Carugno,
L. Taffarello,
G. Cappelli,
N. Crescini,
M. Esposito,
L. Planat,
A. Ranadive,
N. Roch,
D. Alesini,
D. Babusci,
A. D'Elia,
D. Di Gioacchino,
C. Gatti,
C. Ligi,
G. Maccarrone,
A. Rettaroli,
S. Tocci,
D. D'Agostino,
U. Gambardella
, et al. (2 additional authors not shown)
Abstract:
A traveling wave parametric amplifier has been integrated in the haloscope of the QUAX experiment. A search for dark matter axions has been performed with a high Q dielectric cavity immersed in a 8 T magnetic field and read by a detection chain having a system noise temperature of about 2.1 K at the frequency of 10.353 GHz. Scanning has been conducted by varying the cavity frequency using sapphire…
▽ More
A traveling wave parametric amplifier has been integrated in the haloscope of the QUAX experiment. A search for dark matter axions has been performed with a high Q dielectric cavity immersed in a 8 T magnetic field and read by a detection chain having a system noise temperature of about 2.1 K at the frequency of 10.353 GHz. Scanning has been conducted by varying the cavity frequency using sapphire rods immersed into the cavity. At multiple operating frequencies, the sensitivity of the instrument was at the level of viable axion models.
△ Less
Submitted 15 April, 2023;
originally announced April 2023.
-
Stepping closer to pulsed single microwave photon detectors for axions search
Authors:
A. D'Elia,
A. Rettaroli,
S. Tocci,
D. Babusci,
C. Barone,
M. Beretta,
B. Buonomo,
F. Chiarello,
N. Chikhi,
D. Di Gioacchino,
G. Felici,
G. Filatrella,
M. Fistul,
L. G. Foggetta,
C. Gatti,
E. Il'ichev,
C. Ligi,
M. Lisitskiy,
G. Maccarrone,
F. Mattioli,
G. Oelsner,
S. Pagano,
L. Piersanti,
B. Ruggiero,
G. Torrioli
, et al. (1 additional authors not shown)
Abstract:
Axions detection requires the ultimate sensitivity down to the single photon limit. In the microwave region this corresponds to energies in the yJ range. This extreme sensitivity has to be combined with an extremely low dark count rate, since the probability of axions conversion into microwave photons is supposed to be very low. To face this complicated task, we followed two promising approaches t…
▽ More
Axions detection requires the ultimate sensitivity down to the single photon limit. In the microwave region this corresponds to energies in the yJ range. This extreme sensitivity has to be combined with an extremely low dark count rate, since the probability of axions conversion into microwave photons is supposed to be very low. To face this complicated task, we followed two promising approaches that both rely on the use of superconducting devices based on the Josephson effect. The first one is to use a single Josephson junction (JJ) as a switching detector (i.e. exploiting the superconducting to normal state transition in presence of microwave photons). We designed a device composed of a coplanar waveguide terminated on a current biased Josephson junction. We tested its efficiency to pulsed (pulse duration 10 ns) microwave signals, since this configuration is closer to an actual axions search experiment. We show how our device is able to reach detection capability of the order of 10 photons with frequency 8 GHz. The second approach is based on an intrinsically quantum device formed by two resonators coupled only via a superconducting qubit network (SQN). This approach relies on quantum nondemolition measurements of the resonator photons. We show that injecting RF power into the resonator, the frequency position of the resonant drop in the transmission coefficient (S21) can be modulated up to 4 MHz. We anticipate that, once optimized, both the devices have the potential to reach single photon sensitivity.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
Search for galactic axions with a high-Q dielectric cavity
Authors:
D. Alesini,
D. Babusci,
C. Braggio,
G. Carugno,
N. Crescini,
D. DAgostino,
A. D'Elia,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
R. Pengo,
A. Rettaroli,
G. Ruoso,
L. Taffarello,
S. Tocci
Abstract:
A haloscope of the QUAX--$aγ$ experiment, composed of an high-Q resonant cavity immersed in a 8 T magnet and cooled to $\sim 4.5$~K is operated to search for galactic axion with mass $m_a\simeq42.8~μ\text{eV}$. The design of the cavity with hollow dielectric cylinders concentrically inserted in a OFHC Cu cavity, allowed us to maintain a loaded quality-factor Q $\sim 300000$ during the measurements…
▽ More
A haloscope of the QUAX--$aγ$ experiment, composed of an high-Q resonant cavity immersed in a 8 T magnet and cooled to $\sim 4.5$~K is operated to search for galactic axion with mass $m_a\simeq42.8~μ\text{eV}$. The design of the cavity with hollow dielectric cylinders concentrically inserted in a OFHC Cu cavity, allowed us to maintain a loaded quality-factor Q $\sim 300000$ during the measurements in presence of magnetic field. Through the cavity tuning mechanism it was possible to modulate the resonance frequency of the haloscope in the region $10.35337-10.35345$~GHz and thus acquire different dataset at different resonance frequencies. Acquiring each dataset for about 50 minutes, combining them and correcting for the axion's signal estimation-efficiency we set a limit on the axion-photon coupling $g_{aγγ}< 0.731\times10^{-13}$ GeV$^{-1}$ with the confidence level set at $90\%$.
△ Less
Submitted 26 August, 2022;
originally announced August 2022.
-
Progress in the development of a KITWPA for the DARTWARS project
Authors:
M. Borghesi,
C. Barone,
S. Capelli,
G. Carapella,
A. P. Caricato,
I. Carusotto,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
A. Giachero,
D. Giubertoni,
V. Granata,
A. Greco,
C. Guarcello,
D. Labranca,
A. Leo,
C. Ligi,
G. Maccarrone,
F. Mantegazzini
, et al. (16 additional authors not shown)
Abstract:
DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic induc…
▽ More
DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band). The practical development follows two different promising approaches, one based on the Josephson junctions (TWJPA) and the other one based on the kinetic inductance of a high-resistivity superconductor (KITWPA). This paper presents the advancements made by the DARTWARS collaboration to produce a first working prototype of a KITWPA.
△ Less
Submitted 27 October, 2022; v1 submitted 22 August, 2022;
originally announced August 2022.
-
Ultra low noise readout with travelling wave parametric amplifiers: the DARTWARS project
Authors:
A. Rettaroli,
C. Barone,
M. Borghesi,
S. Capelli,
G. Carapella,
A. P. Caricato,
I. Carusotto,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
A. Giachero,
D. Giubertoni,
V. Granata,
A. Greco,
C. Guarcello,
D. Labranca,
A. Leo,
C. Ligi,
G. Maccarrone
, et al. (16 additional authors not shown)
Abstract:
The DARTWARS project has the goal of developing high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junction…
▽ More
The DARTWARS project has the goal of developing high-performing innovative travelling wave parametric amplifiers with high gain, large bandwidth, high saturation power, and nearly quantum-limited noise. The target frequency region for its applications is 5 - 10 GHz, with an expected noise temperature of about 600 mK. The development follows two different approaches, one based on Josephson junctions and one based on kinetic inductance of superconductors. This contribution mainly focuses on the Josephson travelling wave parametric amplifier, presenting its design, preliminary measurements and the test of homogeneity of arrays of Josephson junctions.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
First design of a superconducting qubit for the QUB-IT experiment
Authors:
Danilo Labranca,
Hervè Atsè Corti,
Leonardo Banchi,
Alessandro Cidronali,
Simone Felicetti,
Claudio Gatti,
Andrea Giachero,
Angelo Nucciotti
Abstract:
Quantum sensing is a rapidly growing field of research which is already improving sensitivity in fundamental physics experiments. The ability to control quantum devices to measure physical quantities received a major boost from superconducting qubits and the improved capacity in engineering and fabricating this type of devices. The goal of the QUB-IT project is to realize an itinerant single-photo…
▽ More
Quantum sensing is a rapidly growing field of research which is already improving sensitivity in fundamental physics experiments. The ability to control quantum devices to measure physical quantities received a major boost from superconducting qubits and the improved capacity in engineering and fabricating this type of devices. The goal of the QUB-IT project is to realize an itinerant single-photon counter exploiting Quantum Non Demolition (QND) measurements and entangled qubits, in order to surpass current devices in terms of efficiency and low dark-count rates. Such a detector has direct applications in Axion dark-matter experiments (such as QUAX[1]), which require the photon to travel along a transmission line before being measured. In this contribution we present the design and simulation of the first superconducting device consisting of a transmon qubit coupled to a resonator using Qiskit-Metal (IBM). Exploiting the Energy Participation Ratio (EPR) simulation we were able to extract the circuit Hamiltonian parameters, such as resonant frequencies, anharmonicity and qubit-resonator couplings.
△ Less
Submitted 17 October, 2022; v1 submitted 18 July, 2022;
originally announced July 2022.
-
The storage ring proton EDM experiment
Authors:
Jim Alexander,
Vassilis Anastassopoulos,
Rick Baartman,
Stefan Baeßler,
Franco Bedeschi,
Martin Berz,
Michael Blaskiewicz,
Themis Bowcock,
Kevin Brown,
Dmitry Budker,
Sergey Burdin,
Brendan C. Casey,
Gianluigi Casse,
Giovanni Cantatore,
Timothy Chupp,
Hooman Davoudiasl,
Dmitri Denisov,
Milind V. Diwan,
George Fanourakis,
Antonios Gardikiotis,
Claudio Gatti,
James Gooding,
Renee Fatemi,
Wolfram Fischer,
Peter Graham
, et al. (52 additional authors not shown)
Abstract:
We describe a proposal to search for an intrinsic electric dipole moment (EDM) of the proton with a sensitivity of \targetsens, based on the vertical rotation of the polarization of a stored proton beam. The New Physics reach is of order $10^~3$TeV mass scale. Observation of the proton EDM provides the best probe of CP-violation in the Higgs sector, at a level of sensitivity that may be inaccessib…
▽ More
We describe a proposal to search for an intrinsic electric dipole moment (EDM) of the proton with a sensitivity of \targetsens, based on the vertical rotation of the polarization of a stored proton beam. The New Physics reach is of order $10^~3$TeV mass scale. Observation of the proton EDM provides the best probe of CP-violation in the Higgs sector, at a level of sensitivity that may be inaccessible to electron-EDM experiments. The improvement in the sensitivity to $θ_{QCD}$, a parameter crucial in axion and axion dark matter physics, is about three orders of magnitude.
△ Less
Submitted 25 April, 2022;
originally announced May 2022.
-
Electric dipole moments and the search for new physics
Authors:
Ricardo Alarcon,
Jim Alexander,
Vassilis Anastassopoulos,
Takatoshi Aoki,
Rick Baartman,
Stefan Baeßler,
Larry Bartoszek,
Douglas H. Beck,
Franco Bedeschi,
Robert Berger,
Martin Berz,
Hendrick L. Bethlem,
Tanmoy Bhattacharya,
Michael Blaskiewicz,
Thomas Blum,
Themis Bowcock,
Anastasia Borschevsky,
Kevin Brown,
Dmitry Budker,
Sergey Burdin,
Brendan C. Casey,
Gianluigi Casse,
Giovanni Cantatore,
Lan Cheng,
Timothy Chupp
, et al. (118 additional authors not shown)
Abstract:
Static electric dipole moments of nondegenerate systems probe mass scales for physics beyond the Standard Model well beyond those reached directly at high energy colliders. Discrimination between different physics models, however, requires complementary searches in atomic-molecular-and-optical, nuclear and particle physics. In this report, we discuss the current status and prospects in the near fu…
▽ More
Static electric dipole moments of nondegenerate systems probe mass scales for physics beyond the Standard Model well beyond those reached directly at high energy colliders. Discrimination between different physics models, however, requires complementary searches in atomic-molecular-and-optical, nuclear and particle physics. In this report, we discuss the current status and prospects in the near future for a compelling suite of such experiments, along with developments needed in the encompassing theoretical framework.
△ Less
Submitted 4 April, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
A high-Q microwave dielectric resonator for axion dark matter haloscopes
Authors:
R. Di Vora,
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. D Agostino,
D. Di Gioacchino,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
R. Pengo,
A. Rettaroli,
G. Ruoso,
L. Taffarello,
S. Tocci
Abstract:
The frequency band 1-15 GHz provides exciting prospects for resonant axion haloscopes as indicated by cosmological and astrophysical arguments. Among the challenges currently addressed to reach the required sensitivity, the development of high quality factor cavities that tolerate multi-Tesla fields plays a central role.
We report a 3D resonator based on a right circular copper cavity with hollo…
▽ More
The frequency band 1-15 GHz provides exciting prospects for resonant axion haloscopes as indicated by cosmological and astrophysical arguments. Among the challenges currently addressed to reach the required sensitivity, the development of high quality factor cavities that tolerate multi-Tesla fields plays a central role.
We report a 3D resonator based on a right circular copper cavity with hollow cylinders that confine higher order modes around the cylinder axis. Its effective volume at 10.3\,GHz is $3.4 \cdot 10^{-2}$ liters, and under an 8\,T-field we measured an internal quality factor of more than 9 millions. These parameters demonstrate the potential of this unique resonator to probe galactic dark matter axion at remarkable scan rates of 15\,MHz/day when the cavity is readout by a quantum-limited receiver.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
Impact of the superconductors properties on the measurement sensitivity of resonant-based axion detectors
Authors:
Andrea Alimenti,
Kostiantyn Torokhtii,
Daniele Di Gioacchino,
Claudio Gatti,
Enrico Silva,
Nicola Pompeo
Abstract:
Axions, hypothetical particles theorized to solve the strong CP-problem, are presently being considered as strong candidates as cold dark matter constituents. The signal power of resonant-based axion detectors, known as haloscopes, is directly proportional to their quality factor $Q$. In this paper, the impact of the use of superconductors in the performances of the haloscopes is studied by evalua…
▽ More
Axions, hypothetical particles theorized to solve the strong CP-problem, are presently being considered as strong candidates as cold dark matter constituents. The signal power of resonant-based axion detectors, known as haloscopes, is directly proportional to their quality factor $Q$. In this paper, the impact of the use of superconductors in the performances of the haloscopes is studied by evaluating the obtainable $Q$. In particular, the surface resistance $R_s$ of NbTi, Nb$_3$Sn, YBa$_2$Cu$_3$O$_{7-δ}$ and FeSe$_{0.5}$Te$_{0.5}$ is computed in the frequency, magnetic field and temperature ranges of interest, starting from the measured vortex motion complex resistivity and screening lengths of these materials. From $R_s$ the quality factor $Q$ of a cylindrical haloscope with copper conical bases and superconductive lateral wall, operating with the TM$_{010}$ mode, is evaluated and used to perform a comparison of the performances of the different materials. Both YBa$_2$Cu$_3$O$_{7-δ}$ and FeSe$_{0.5}$Te$_{0.5}$ are shown to improve the measurement sensitivity by almost an order of magnitude with respect to a whole Cu cavity, while NbTi is shown to be suitable only at lower frequencies (<10 GHz). Nb$_3$Sn can give an intermediate improvement in the whole spectrum of interest.
△ Less
Submitted 23 December, 2021;
originally announced December 2021.
-
Detector Array Readout with Traveling Wave Amplifiers
Authors:
A. Giachero,
C. Barone,
M. Borghesi,
G. Carapella,
A. P. Caricato,
I. Carusotto,
W. Chang,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
L. Fasolo,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
D. Giubertoni,
A. Greco,
C. Kutlu,
A. Leo,
C. Ligi,
G. Maccarrone,
B. Margesin,
G. Maruccio,
A. Matlashov
, et al. (13 additional authors not shown)
Abstract:
Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures, such as the neutrino mass measurement, the next-generation x-ray observatory, the CMB measurement, the dark matter and axion detection, and the rapid high-fidelity readout of superconducting qubits. The read out sensitivity of arrays of microcalorimeter dete…
▽ More
Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures, such as the neutrino mass measurement, the next-generation x-ray observatory, the CMB measurement, the dark matter and axion detection, and the rapid high-fidelity readout of superconducting qubits. The read out sensitivity of arrays of microcalorimeter detectors, resonant axion-detectors, and qubits, is currently limited by the noise temperature and bandwidth of the cryogenic amplifiers. The DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) project has the goal of developing high-performing innovative traveling wave parametric amplifiers (TWPAs) with a high gain, a high saturation power, and a quantum-limited or nearly quantum-limited noise. The practical development follows two different promising approaches, one based on the Josephson junctions and the other one based on the kinetic inductance of a high-resistivity superconductor. In this contribution we present the aims of the project, the adopted design solutions and preliminary results from simulations and measurements.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Bimodal Approach for Noise Figures of Merit Evaluation in Quantum-Limited Josephson Traveling Wave Parametric Amplifiers
Authors:
L. Fasolo,
C. Barone,
M. Borghesi,
G. Carapella,
A. P. Caricato,
I. Carusotto,
W. Chung,
A. Cian,
D. Di Gioacchino,
E. Enrico,
P. Falferi,
M. Faverzani,
E. Ferri,
G. Filatrella,
C. Gatti,
A. Giachero,
D. Giubertoni,
A. Greco,
C. Kutlu,
A. Leo,
C. Ligi,
P. Livreri,
G. Maccarrone,
B. Margesin,
G. Maruccio
, et al. (15 additional authors not shown)
Abstract:
The advent of ultra-low noise microwave amplifiers revolutionized several research fields demanding quantum-limited technologies. Exploiting a theoretical bimodal description of a linear phase-preserving amplifier, in this contribution we analyze some of the intrinsic properties of a model architecture (i.e., an rf-SQUID based Josephson Traveling Wave Parametric Amplifier) in terms of amplificatio…
▽ More
The advent of ultra-low noise microwave amplifiers revolutionized several research fields demanding quantum-limited technologies. Exploiting a theoretical bimodal description of a linear phase-preserving amplifier, in this contribution we analyze some of the intrinsic properties of a model architecture (i.e., an rf-SQUID based Josephson Traveling Wave Parametric Amplifier) in terms of amplification and noise generation for key case study input states (Fock and coherents). Furthermore, we present an analysis of the output signals generated by the parametric amplification mechanism when thermal noise fluctuations feed the device.
△ Less
Submitted 29 December, 2021; v1 submitted 30 September, 2021;
originally announced September 2021.
-
Josephson-based scheme for the detection of microwave photons
Authors:
Claudio Guarcello,
Alex Stephane Piedjou Komnang,
Carlo Barone,
Alessio Rettaroli,
Claudio Gatti,
Sergio Pagano,
Giovanni Filatrella
Abstract:
We propose a scheme for the detection of microwave induced photons through current-biased Josephson junction, from the point of view of the statistical decision theory. Our analysis is based on the numerical study of the zero voltage lifetime distribution in response to a periodic train of pulses, that mimics the absorption of photons. The statistical properties of the detection are retrieved comp…
▽ More
We propose a scheme for the detection of microwave induced photons through current-biased Josephson junction, from the point of view of the statistical decision theory. Our analysis is based on the numerical study of the zero voltage lifetime distribution in response to a periodic train of pulses, that mimics the absorption of photons. The statistical properties of the detection are retrieved comparing the thermally induced transitions with the distribution of the switchings to the finite voltage state due to the joint action of thermal noise and of the incident pulses. The capability to discriminate the photon arrival can be quantified through the Kumar-Caroll index, which is a good indicator of the Signal-to-Noise-Ratio. The index can be exploited to identify the system parameters best suited for the detection of weak microwave photons.
△ Less
Submitted 5 November, 2021; v1 submitted 2 August, 2021;
originally announced August 2021.
-
Development of a Josephson junction based single photon microwave detector for axion detection experiments
Authors:
D Alesini,
D Babusci,
C Barone,
B Buonomo,
M M Beretta,
L Bianchini,
G Castellano,
F Chiarello,
D Di Gioacchino,
P Falferi,
G Felici,
G Filatrella,
L G Foggetta,
A Gallo,
C Gatti,
F Giazotto,
G Lamanna,
F Ligabue,
N Ligato,
C Ligi,
G Maccarrone,
B Margesin,
F Mattioli,
E Monticone,
L Oberto
, et al. (8 additional authors not shown)
Abstract:
Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson…
▽ More
Josephson junctions, in appropriate configurations, can be excellent candidates for detection of single photons in the microwave frequency band. Such possibility has been recently addressed in the framework of galactic axion detection. Here are reported recent developments in the modelling and simulation of dynamic behaviour of a Josephson junction single microwave photon detector. For a Josephson junction to be enough sensitive, small critical currents and operating temperatures of the order of ten of mK are necessary. Thermal and quantum tunnelling out of the zero-voltage state can also mask the detection process. Axion detection would require dark count rates in the order of 0.001 Hz. It is, therefore, is of paramount importance to identify proper device fabrication parameters and junction operation point.
△ Less
Submitted 2 July, 2021;
originally announced July 2021.
-
Status of the SIMP Project: Toward the Single Microwave Photon Detection
Authors:
David Alesini,
Danilo Babusci,
Carlo Barone,
Bruno Buonomo,
Matteo Mario Beretta,
Lorenzo Bianchini,
Gabriella Castellano,
Fabio Chiarello,
Daniele Di Gioacchino,
Paolo Falferi,
Giulietto Felici,
Giovanni Filatrella,
Luca Gennaro Foggetta,
Alessandro Gallo,
Claudio Gatti,
Francesco Giazotto,
Gianluca Lamanna,
Franco Ligabue,
Nadia Ligato,
Carlo Ligi,
Giovanni Maccarrone,
Benno Margesin,
Francesco Mattioli,
Eugenio Monticone,
Luca Oberto
, et al. (8 additional authors not shown)
Abstract:
The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of developing a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for th…
▽ More
The Italian institute for nuclear physics (INFN) has financed the SIMP project (2019-2021) in order to strengthen its skills and technologies in the field of meV detectors with the ultimate aim of developing a single microwave photon detector. This goal will be pursued by improving the sensitivity and the dark count rate of two types of photodetectors: current biased Josephson Junction (JJ) for the frequency range 10-50 GHz and Transition Edge Sensor (TES) for the frequency range 30-100 GHz. Preliminary results on materials and devices characterization are presented.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Game Design for Blockchain Learning
Authors:
Diogo Cortiz,
Newton Calegari,
Fabiana Oliveira,
Daniel Couto Gatti
Abstract:
Blockchain is a new technological approach that has gained popularity on the market due to its application in several areas such as education, health, security, and smart cities, among others. However, understanding how blockchain works is not easy at first, especially for non-technical people, because it relies on a non-trivial computational process. We have developed a game board - called Blockt…
▽ More
Blockchain is a new technological approach that has gained popularity on the market due to its application in several areas such as education, health, security, and smart cities, among others. However, understanding how blockchain works is not easy at first, especially for non-technical people, because it relies on a non-trivial computational process. We have developed a game board - called Blocktrain - whose game mechanics are based on the blockchain processing model. This game gives people the opportunity to learn key blockchain concepts while playing. In this paper, we describe the game design process and assessment of the game as pedagogical instrument.
△ Less
Submitted 14 April, 2021;
originally announced April 2021.
-
Search for invisible axion dark matter of mass m$_a=43~μ$eV with the QUAX--$aγ$ experiment
Authors:
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. D'Agostino,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
R. Pengo,
A. Rettaroli,
G. Ruoso,
L. Taffarello,
S. Tocci
Abstract:
A haloscope of the QUAX--$aγ$ experiment composed of an oxygen-free high thermal conductivity-Cu cavity inside an 8.1 T magnet and cooled to $\sim200$ mK is put in operation for the search of galactic axion with mass $m_a\simeq43~μ\text{eV}$. The power emitted by the resonant cavity is amplified with a Josephson parametric amplifier whose noise fluctuations are at the standard quantum limit. With…
▽ More
A haloscope of the QUAX--$aγ$ experiment composed of an oxygen-free high thermal conductivity-Cu cavity inside an 8.1 T magnet and cooled to $\sim200$ mK is put in operation for the search of galactic axion with mass $m_a\simeq43~μ\text{eV}$. The power emitted by the resonant cavity is amplified with a Josephson parametric amplifier whose noise fluctuations are at the standard quantum limit. With the data collected in about 1 h at the cavity frequency $ν_c=10.40176$ GHz, the experiment reaches the sensitivity necessary for the detection of galactic QCD-axion, setting the $90\%$ confidence level limit to the axion-photon coupling $g_{aγγ}<0.639\times10^{-13}$ GeV$^{-1}$.
△ Less
Submitted 26 May, 2021; v1 submitted 17 December, 2020;
originally announced December 2020.
-
Development of highly sensitive nanoscale transition edge sensors for gigahertz astronomy and dark matter search
Authors:
Federico Paolucci,
Vittorio Buccheri,
Gaia Germanese,
Nadia Ligato,
Riccardo Paoletti,
Giovanni Signorelli,
Massimiliano Bitossi,
Paolo Spagnolo,
Paolo Falferi,
Mauro Rajteri,
Claudio Gatti,
Francesco Giazotto
Abstract:
Terahertz and sub-terahertz band detection has a key role both in fundamental interactions physics and technological applications, such as medical imaging, industrial quality control and homeland security. In particular, transition edge sensors (TESs) and kinetic inductance detectors (KIDs) are the most employed bolometers and calorimeters in the THz and sub-THz band for astrophysics and astropart…
▽ More
Terahertz and sub-terahertz band detection has a key role both in fundamental interactions physics and technological applications, such as medical imaging, industrial quality control and homeland security. In particular, transition edge sensors (TESs) and kinetic inductance detectors (KIDs) are the most employed bolometers and calorimeters in the THz and sub-THz band for astrophysics and astroparticles research. Here, we present the electronic, thermal and spectral characterization of an aluminum/copper bilayer sensing structure that, thanks to its thermal properties and a simple miniaturized design, could be considered a perfect candidate to realize an extremely sensitive class of nanoscale TES (nano-TES) for the giga-therahertz band. Indeed, thanks to the reduced dimensionality of the active region and the efficient Andreev mirror (AM) heat confinement, our devices are predicted to reach state-of-the-art TES performance. In particular, as a bolometer the nano-TES is expected to have a noise equivalent power (NEP) of $5\times10^{-20}$ W/$\sqrt{\mathrm{Hz}}$ and a relaxation time of $\sim 10$ ns for the sub-THz band, typical of cosmic microwave background studies. When operated as single-photon sensor, the devices are expected to show a remarkable frequency resolution of 100 GHz, pointing towards the necessary energy sensitivity requested in laboratory axion search experiments. Finally, different multiplexing schemes are proposed and sized for imaging applications.
△ Less
Submitted 19 November, 2020; v1 submitted 16 July, 2020;
originally announced July 2020.
-
A cryogenic magneto-optical device for long wavelength radiation
Authors:
S. J. Rezvani,
D. Di Gioacchino,
S. Tofani,
A. Darco,
C. Ligi,
S. Lupi,
C. Gatti,
M. Cestelli Guidi,
A. Marcelli
Abstract:
We present here a small-scale liquid Helium (LHe) immersion cryostat with an innovative optical setup suitable to work in long wavelength radiation ranges and under applied magnetic field. The cryostat is a multi stage device with several shielding in addition to several optical stages. The system has been designed with an external liquid Nitrogen boiler to reduce the liquid bubbling. The optical…
▽ More
We present here a small-scale liquid Helium (LHe) immersion cryostat with an innovative optical setup suitable to work in long wavelength radiation ranges and under applied magnetic field. The cryostat is a multi stage device with several shielding in addition to several optical stages. The system has been designed with an external liquid Nitrogen boiler to reduce the liquid bubbling. The optical and mechanical properties of the optical elements were calculated and optimized for the designed configuration while the optical layout has been simulated and optimized among different configurations based on the geometry of the device. The final design has been optimized for low noise radiation measurements of proximity junction arrays under applied magnetic field in the wavelength range $λ$=250-2500 $μ$m.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.
-
Realization of a high quality factor resonator with hollow dielectric cylinders for axion searches
Authors:
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. D' Agostino,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
R. Pengo,
C. Pira,
A. Rettaroli,
G. Ruoso,
L. Taffarello,
S. Tocci
Abstract:
The realization and characterization of a high quality factor resonator composed of two hollow-dielectric cylinders with its pseudo-TM$_{030}$ mode resonating at 10.9 GHz frequency is discussed. The quality factor was measured at the temperatures 300 K and 4 K obtaining $\mbox{Q}_{300\mbox{K}}=(150,000\pm 2,000)$ and $\mbox{Q}_{4\mbox{K}}=(720,000\pm 10,000)$respectively, the latter corresponding…
▽ More
The realization and characterization of a high quality factor resonator composed of two hollow-dielectric cylinders with its pseudo-TM$_{030}$ mode resonating at 10.9 GHz frequency is discussed. The quality factor was measured at the temperatures 300 K and 4 K obtaining $\mbox{Q}_{300\mbox{K}}=(150,000\pm 2,000)$ and $\mbox{Q}_{4\mbox{K}}=(720,000\pm 10,000)$respectively, the latter corresponding to a gain of one order of magnitude with respect to a traditional copper cylindrical-cavity with the corresponding TM$_{010}$ mode resonating at the same frequency. The implications to dark-matter axion-searches with cavity experiments are discussed showing that the gain in quality factor is not spoiled by a reduced geometrical coupling $C_{030}$ of the cavity mode to the axion field. This reduction effect is estimated to be at most 20%. Numerical simulations show that frequency tuning of several hundreds MHz is feasible.
△ Less
Submitted 28 September, 2020; v1 submitted 6 April, 2020;
originally announced April 2020.
-
High quality factor photonic cavity for dark matter axion searches
Authors:
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. D'Agostino,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
G. Maccarrone,
A. Ortolan,
R. Pengo,
C. Pira,
A. Rettaroli,
G. Ruoso,
L. Taffarello,
S. Tocci
Abstract:
Searches for dark matter axion involve the use of microwave resonant cavities operating in a strong magnetic field. Detector sensitivity is directly related to the cavity quality factor, which is limited, however, by the presence of the external magnetic field. In this paper we present a cavity of novel design whose quality factor is not affected by a magnetic field. It is based on a photonic stru…
▽ More
Searches for dark matter axion involve the use of microwave resonant cavities operating in a strong magnetic field. Detector sensitivity is directly related to the cavity quality factor, which is limited, however, by the presence of the external magnetic field. In this paper we present a cavity of novel design whose quality factor is not affected by a magnetic field. It is based on a photonic structure by the use of sapphire rods. The quality factor at cryogenic temperature is in excess of $5 \times 10^5$ for a selected mode.
△ Less
Submitted 5 February, 2020;
originally announced February 2020.
-
Expression and interactions of stereo-chemically active lone pairs and their relation to structural distortions and thermal conductivity
Authors:
Kasper Tolborg,
Carlo Gatti,
Bo B. Iversen
Abstract:
Stereo-chemically active lone pairs are typically described as an important non-bonding effect, and large interest has centered on understanding the derived effect of lone pair expression on physical properties such as the thermal conductivity. To manipulate such properties, it is essential to understand the conditions that lead to lone pair expression and to provide a quantitative chemical descri…
▽ More
Stereo-chemically active lone pairs are typically described as an important non-bonding effect, and large interest has centered on understanding the derived effect of lone pair expression on physical properties such as the thermal conductivity. To manipulate such properties, it is essential to understand the conditions that lead to lone pair expression and to provide a quantitative chemical description. Here we first use density functional theory calculations to establish the presence of stereo-chemically active lone pairs on antimony in $\text{MnSb}_{2}\text{O}_{4}$. The lone pairs are formed through a similar mechanism to those in binary post-transition metal compounds in an oxidation state of two less than their main group number, where the degree of orbital interaction determines the expression of the lone pair. In $\text{MnSb}_{2}\text{O}_{4}$ the Sb lone pairs interact through a void space in the crystal structure, and they minimize their mutual repulsion by introducing a deflection angle. This angle increases significantly with decreasing Sb-Sb distance, thus showing the highly destabilizing nature of the lone pair interactions. Analysis of the chemical bonding in the structure shows that it is dominated by polar covalent interactions. A database search of related ternary chalcogenide structures shows that for structures with a lone pair the degree of lone pair expression is largely determined by whether the antimony-chalcogen units are connected or not, suggesting a cooperative effect. Isolated $\text{SbX}_3$ units have larger X-Sb-X bond angles, and therefore weaker lone pair expression than connected units. Since increased lone pair expression is equivalent to an increased orbital interaction (covalent bonding), which typically leads to increased heat conduction, this can explain the previously established correlation between larger bond angles and lower thermal conductivity.
△ Less
Submitted 4 February, 2020;
originally announced February 2020.
-
Axion search with a quantum-limited ferromagnetic haloscope
Authors:
N. Crescini,
D. Alesini,
C. Braggio,
G. Carugno,
D. D Agostino,
D. Di Gioacchino,
P. Falferi,
U. Gambardella,
C. Gatti,
G. Iannone,
C. Ligi,
A. Lombardi,
A. Ortolan,
R. Pengo,
G. Ruoso,
L. Taffarello
Abstract:
A ferromagnetic axion haloscope searches for Dark Matter in the form of axions by exploiting their interaction with electronic spins. It is composed of an axion-to-electromagnetic field transducer coupled to a sensitive rf detector. The former is a photon-magnon hybrid system, and the latter is based on a quantum-limited Josephson parametric amplifier. The hybrid system consists of ten 2.1 mm diam…
▽ More
A ferromagnetic axion haloscope searches for Dark Matter in the form of axions by exploiting their interaction with electronic spins. It is composed of an axion-to-electromagnetic field transducer coupled to a sensitive rf detector. The former is a photon-magnon hybrid system, and the latter is based on a quantum-limited Josephson parametric amplifier. The hybrid system consists of ten 2.1 mm diameter YIG spheres coupled to a single microwave cavity mode by means of a static magnetic field. Our setup is the most sensitive rf spin-magnetometer ever realized. The minimum detectable field is $5.5\times10^{-19}\,$T with 9 h integration time, corresponding to a limit on the axion-electron coupling constant $g_{aee}\le1.7\times10^{-11}$ at 95% CL. The scientific run of our haloscope resulted in the best limit on DM-axions to electron coupling constant in a frequency span of about 120 MHz, corresponding to the axion mass range $42.4$-$43.1\,μ$eV. This is also the first apparatus to perform an axion mass scanning by changing the static magnetic field.
△ Less
Submitted 24 January, 2020;
originally announced January 2020.
-
Tunable vortex dynamics in proximity junction arrays: a possible accurate and sensitive 2D THz detector
Authors:
J. Rezvani,
D. Di Gioacchino,
C. Gatti,
N. Poccia,
C. Ligi,
S. Tocci,
M. Cestelli Guidi,
S. Cibella,
S. Lupi,
A. Marcelli
Abstract:
An array of superconducting proximity islands has been shown to be highly tunable by electric and magnetic fields. Indeed, a small change in the electric and magnetic field can tune the system from a vortex Mott insulator to a vortex metal. This transition from localized to a non-localized state can occur as soon as the density of the superconducting vortices matches the density of the pinning sit…
▽ More
An array of superconducting proximity islands has been shown to be highly tunable by electric and magnetic fields. Indeed, a small change in the electric and magnetic field can tune the system from a vortex Mott insulator to a vortex metal. This transition from localized to a non-localized state can occur as soon as the density of the superconducting vortices matches the density of the pinning sites in a non defective structure. The possibility of further modulation of non-localized superconducting states via enhancement of the superconducting order parameter or modulation of the Josephson plasma frequency is discussed. Based on the non-bolometric effects associated with the occurrence of non-equilibrium phenomena in this original superconducting networks we discuss also the possible applications of this array for a conceptually new type of radiation detector.
△ Less
Submitted 12 December, 2019;
originally announced December 2019.
-
KLASH Conceptual Design Report
Authors:
D. Alesini,
D. Babusci,
P. Beltrame S. J.,
F. Björkeroth,
F. Bossi,
P. Ciambrone,
G. Delle Monache,
D. Di Gioacchino,
P. Falferi,
A. Gallo,
C. Gatti,
A. Ghigo,
M. Giannotti,
G. Lamanna,
C. Ligi,
G. Maccarrone,
A. Mirizzi,
D. Montanino,
D. Moricciani,
A. Mostacci,
M. Mück,
E. Nardi,
F. Nguyen,
L. Pellegrino,
A. Rettaroli
, et al. (4 additional authors not shown)
Abstract:
The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated…
▽ More
The last decade witnessed an increasing interest in axions and axion-like particles with many theoretical works published and many new experimental proposals that started a real race towards their discovery. This paper is the Conceptual Design Report of the KLASH (KLoe magnet for Axion SearcH) experiment at the Laboratori Nazionali di Frascati (LNF). The idea of this experiment has been stimulated by the availability of the large volume superconducting magnet, with a moderate magnetic field of 0.6 T, used in the KLOE detector at the DAFNE collider. The main conclusion we draw from this report is the possibility to build and put in operation at LNF in 2-3 years a large haloscope with the sensitivity to KSVZ axions in the low mass range between 0.2 and 1 $μ$eV, complementary to that of other experiments. Timeline and cost are competitive with respect to other proposals in the same mass region thanks to the availability of most of the infrastructure, in particular the superconducting magnet and the cryogenics plant.
△ Less
Submitted 6 November, 2019;
originally announced November 2019.
-
Galactic axions search with a superconducting resonant cavity
Authors:
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. D'Agostino,
D. Di Gioacchino,
R. Di Vora,
P. Falferi,
S. Gallo,
U. Gambardella,
C. Gatti,
G. Iannone,
G. Lamanna,
C. Ligi,
A. Lombardi,
R. Mezzena,
A. Ortolan,
R. Pengo,
N. Pompeo,
A. Rettaroli,
G. Ruoso,
E. Silva,
C. C. Speake,
L. Taffarello,
S. Tocci
Abstract:
To account for the dark matter content in our Universe, post-inflationary scenarios predict for the QCD axion a mass in the range $(10-10^3)\,μ\mbox{eV}$. Searches with haloscope experiments in this mass range require the monitoring of resonant cavity modes with frequency above 5\,GHz, where several experimental limitations occur due to linear amplifiers, small volumes, and low quality factors of…
▽ More
To account for the dark matter content in our Universe, post-inflationary scenarios predict for the QCD axion a mass in the range $(10-10^3)\,μ\mbox{eV}$. Searches with haloscope experiments in this mass range require the monitoring of resonant cavity modes with frequency above 5\,GHz, where several experimental limitations occur due to linear amplifiers, small volumes, and low quality factors of Cu resonant cavities. In this paper we deal with the last issue, presenting the result of a search for galactic axions using a haloscope based on a $36\,\mbox{cm}^3$ NbTi superconducting cavity. The cavity worked at $T=4\,\mbox{K}$ in a 2\,T magnetic field and exhibited a quality factor $Q_0= 4.5\times10^5$ for the TM010 mode at 9\,GHz. With such values of $Q$ the axion signal is significantly increased with respect to copper cavity haloscopes. Operating this setup we set the limit $g_{aγγ}<1.03\times10^{-12}\,\mbox{GeV}^{-1}$ on the axion photon coupling for a mass of about 37\,$μ$eV. A comprehensive study of the NbTi cavity at different magnetic fields, temperatures, and frequencies is also presented.
△ Less
Submitted 15 March, 2019;
originally announced March 2019.
-
The Klash Proposal: Status and Perspectives
Authors:
C. Gatti,
D. Alesini,
D. Babusci,
C. Braggio,
G. Carugno,
N. Crescini,
D. Di Gioacchino,
P. Falferi,
G. Lamanna,
C. Ligi,
A. Ortolan,
L. Pellegrino,
A. Rettaroli,
G. Ruoso,
S. Tocci
Abstract:
Recently some of the authors proposed a search for galactic axions with mass about 0.2~$μ$eV using a large volume resonant cavity, tens of cubic meters, cooled down to 4~K and immersed in a magnetic field of about 0.6~T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion Sear…
▽ More
Recently some of the authors proposed a search for galactic axions with mass about 0.2~$μ$eV using a large volume resonant cavity, tens of cubic meters, cooled down to 4~K and immersed in a magnetic field of about 0.6~T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH), has a potential sensitivity on the axion-to-photon coupling, $g_{aγγ}$, of about $6\times10^{-17}$ $\mbox{GeV}^{-1}$, reaching the region predicted by KSVZ\cite{KSVZ} and DFSZ\cite{DFSZ} models of QCD axions. We report here the status of the project.
△ Less
Submitted 16 November, 2018;
originally announced November 2018.
-
Construction techniques and performances of a full-size prototype Micromegas chamber for the ATLAS muon spectrometer upgrade
Authors:
T. Alexopoulos,
M. Alviggi,
M. Antonelli,
F. Anulli,
C. Arcangeletti,
P. Bagnaia,
A. Baroncelli,
M. Beretta,
C. Bini,
J. Bortfeldt,
D. Calabrò,
V. Canale,
G. Capradossi,
G. Carducci,
A. Caserio,
C. Cassese,
S. Cerioni,
G. Ciapetti,
V. D' Amico,
B. De Fazio,
M. Del Gaudio,
C. Di Donato,
R. Di Nardo,
D. D' Uffizi,
E. Farina
, et al. (54 additional authors not shown)
Abstract:
A full-size prototype of a Micromegas precision tracking chamber for the upgrade of the ATLAS detector at the LHC Collider has been built between October 2015 and April 2016. This paper describes in detail the procedures used in constructing the single modules of the chamber in various INFN laboratories and the final assembly at the Laboratori Nazionali di Frascati (LNF). Results of the chamber ex…
▽ More
A full-size prototype of a Micromegas precision tracking chamber for the upgrade of the ATLAS detector at the LHC Collider has been built between October 2015 and April 2016. This paper describes in detail the procedures used in constructing the single modules of the chamber in various INFN laboratories and the final assembly at the Laboratori Nazionali di Frascati (LNF). Results of the chamber exposure to the CERN SPS/H8 beam line in June 2016 are also presented. The performances achieved in the construction and the results of the test beam are compared with the requirements, which are imposed by the severe environment during the data-taking of the LHC foreseen for the next years.
△ Less
Submitted 11 September, 2018; v1 submitted 29 August, 2018;
originally announced August 2018.
-
Operation of a ferromagnetic axion haloscope at $m_a=58\,μ$eV
Authors:
N. Crescini,
D. Alesini,
C. Braggio,
G. Carugno,
D. Di Gioacchino,
C. S. Gallo,
U. Gambardella,
C. Gatti,
G. Iannone,
G. Lamanna,
C. Ligi,
A. Lombardi,
A. Ortolan,
S. Pagano,
R. Pengo,
G. Ruoso,
C. C. Speake,
L. Taffarello
Abstract:
Axions, originally proposed to solve the strong CP problem of quantum chromodynamics, emerge now as leading candidates of WISP dark matter. The rich phenomenology associated to the light and stable QCD axion can be described as an effective magnetic field that can be experimentally investigated. For the QUAX experiment, dark matter axions are searched by means of their resonant interactions with e…
▽ More
Axions, originally proposed to solve the strong CP problem of quantum chromodynamics, emerge now as leading candidates of WISP dark matter. The rich phenomenology associated to the light and stable QCD axion can be described as an effective magnetic field that can be experimentally investigated. For the QUAX experiment, dark matter axions are searched by means of their resonant interactions with electronic spins in a magnetized sample. In principle, axion-induced magnetization changes can be detected by embedding a sample in an rf cavity in a static magnetic field. In this work we describe the operation of a prototype ferromagnetic haloscope, with a sensitivity limited by thermal fluctuations and receiver noise. With a preliminary dark matter search, we are able to set an upper limit on the coupling constant of DFSZ axions to electrons $g_{aee}<4.9\times10^{-10}$ at 95\% C.L. for a mass of $58\,μ$eV (i.\,e. 14\,GHz). This is the first experimental result with an apparatus exploiting the coupling between cosmological axions and electrons.
△ Less
Submitted 31 August, 2018; v1 submitted 1 June, 2018;
originally announced June 2018.
-
Searching for galactic axions through magnetized media: QUAX status report
Authors:
G. Ruoso,
D. Alesini,
C. Braggio,
G. Carugno,
N. Crescini,
D. Di Gioacchino,
P. Falferi,
S. Gallo,
U. Gambardella,
C. Gatti,
G. Iannone,
G. Lamanna,
C. Ligi,
A. Lombardi,
R. Mezzena,
A. Ortolan,
R. Pengo,
C. C. Speake
Abstract:
The current status of the QUAX R\&D program is presented. QUAX is a feasibility study for a detection of axion as dark matter based on the coupling to the electrons. The relevant signal is a magnetization change of a magnetic material placed inside a resonant microwave cavity and polarized with a static magnetic field.
The current status of the QUAX R\&D program is presented. QUAX is a feasibility study for a detection of axion as dark matter based on the coupling to the electrons. The relevant signal is a magnetization change of a magnetic material placed inside a resonant microwave cavity and polarized with a static magnetic field.
△ Less
Submitted 13 February, 2018;
originally announced February 2018.
-
The KLASH Proposal
Authors:
David Alesini,
Danilo Babusci,
Daniele Di Gioacchino,
Claudio Gatti,
Gianluca Lamanna,
Carlo Ligi
Abstract:
We propose a search of galactic axions with mass about 0.2 microeV using a large volume resonant cavity, about 50 m^3, cooled down to 4 K and immersed in a moderate axial magnetic field of about 0.6 T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH) in the followin…
▽ More
We propose a search of galactic axions with mass about 0.2 microeV using a large volume resonant cavity, about 50 m^3, cooled down to 4 K and immersed in a moderate axial magnetic field of about 0.6 T generated inside the superconducting magnet of the KLOE experiment located at the National Laboratory of Frascati of INFN. This experiment, called KLASH (KLoe magnet for Axion SearcH) in the following, has a potential sensitivity on the axion-to-photon coupling, g_agg, of about 6x10^-17 GeV-1, reaching the region predicted by KSVZ and DFSZ models of QCD axions.
△ Less
Submitted 19 July, 2017;
originally announced July 2017.
-
A Historical Analysis of the Field of OR/MS using Topic Models
Authors:
Christopher J. Gatti,
James D. Brooks,
Sarah G. Nurre
Abstract:
This study investigates the content of the published scientific literature in the fields of operations research and management science (OR/MS) since the early 1950s. Our study is based on 80,757 published journal abstracts from 37 of the leading OR/MS journals. We have developed a topic model, using Latent Dirichlet Allocation (LDA), and extend this analysis to reveal the temporal dynamics of the…
▽ More
This study investigates the content of the published scientific literature in the fields of operations research and management science (OR/MS) since the early 1950s. Our study is based on 80,757 published journal abstracts from 37 of the leading OR/MS journals. We have developed a topic model, using Latent Dirichlet Allocation (LDA), and extend this analysis to reveal the temporal dynamics of the field, journals, and topics. Our analysis shows the generality or specificity of each of the journals, and we identify groups of journals with similar content, which are both consistent and inconsistent with intuition. We also show how journals have become more or less unique in their scope. A more detailed analysis of each journals' topics over time shows significant temporal dynamics, especially for journals with niche content. This study presents an observational, yet objective, view of the published literature from OR/MS that would be of interest to authors, editors, journals, and publishers. Furthermore, this work can be used by new entrants to the fields of OR/MS to understand the content landscape, as a starting point for discussions and inquiry of the field at large, or as a model for other fields to perform similar analyses.
△ Less
Submitted 17 October, 2015;
originally announced October 2015.
-
A stable compound of helium and sodium at high pressure
Authors:
Xiao Dong,
Artem R. Oganov,
Alexander F. Goncharov,
Elissaios Stavrou,
Sergey Lobanov,
Gabriele Saleh,
Guang-Rui Qian,
Qiang Zhu,
Carlo Gatti,
Volker L. Deringer,
Richard Dronskowski,
Xiang-Feng Zhou,
Vitali B. Prakapenka,
Zuzana Konôpková,
Ivan A. Popov,
Alexander I. Boldyrev,
Hui-Tian Wang
Abstract:
Helium is generally understood to be chemically inert and this is due to its extremely stable closed-shell electronic configuration, zero electron affinity and an unsurpassed ionization potential. It is not known to form thermodynamically stable compounds, except a few inclusion compounds. Here, using the ab initio evolutionary algorithm USPEX and subsequent high-pressure synthesis in a diamond an…
▽ More
Helium is generally understood to be chemically inert and this is due to its extremely stable closed-shell electronic configuration, zero electron affinity and an unsurpassed ionization potential. It is not known to form thermodynamically stable compounds, except a few inclusion compounds. Here, using the ab initio evolutionary algorithm USPEX and subsequent high-pressure synthesis in a diamond anvil cell, we report the discovery of a thermodynamically stable compound of helium and sodium, Na2He, which has a fluorite-type structure and is stable at pressures >113 GPa. We show that the presence of He atoms causes strong electron localization and makes this material insulating. This phase is an electride, with electron pairs localized in interstices, forming eight-centre two-electron bonds within empty Na8 cubes. We also predict the existence of Na2HeO with a similar structure at pressures above 15 GPa.
△ Less
Submitted 13 February, 2017; v1 submitted 15 September, 2013;
originally announced September 2013.
-
IRIDE White Book, An Interdisciplinary Research Infrastructure based on Dual Electron linacs&lasers
Authors:
D. Alesini,
M. Alessandroni,
M. P. Anania,
S. Andreas,
M. Angelone,
A. Arcovito,
F. Arnesano,
M. Artioli,
L. Avaldi,
D. Babusci,
A. Bacci,
A. Balerna,
S. Bartalucci,
R. Bedogni,
M. Bellaveglia,
F. Bencivenga,
M. Benfatto,
S. Biedron,
V. Bocci,
M. Bolognesi,
P. Bolognesi,
R. Boni,
R. Bonifacio,
M. Boscolo,
F. Boscherini
, et al. (189 additional authors not shown)
Abstract:
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high ener…
▽ More
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE will contribute to open new avenues of discoveries and to address most important riddles: What does matter consist of? What is the structure of proteins that have a fundamental role in life processes? What can we learn from protein structure to improve the treatment of diseases and to design more efficient drugs? But also how does an electronic chip behave under the effect of radiations? How can the heat flow in a large heat exchanger be optimized? The scientific potential of IRIDE is far reaching and justifies the construction of such a large facility in Italy in synergy with the national research institutes and companies and in the framework of the European and international research. It will impact also on R&D work for ILC, FEL, and will be complementarity to other large scale accelerator projects. IRIDE is also intended to be realized in subsequent stages of development depending on the assigned priorities.
△ Less
Submitted 30 July, 2013;
originally announced July 2013.
-
SuperB Technical Design Report
Authors:
SuperB Collaboration,
M. Baszczyk,
P. Dorosz,
J. Kolodziej,
W. Kucewicz,
M. Sapor,
A. Jeremie,
E. Grauges Pous,
G. E. Bruno,
G. De Robertis,
D. Diacono,
G. Donvito,
P. Fusco,
F. Gargano,
F. Giordano,
F. Loddo,
F. Loparco,
G. P. Maggi,
V. Manzari,
M. N. Mazziotta,
E. Nappi,
A. Palano,
B. Santeramo,
I. Sgura,
L. Silvestris
, et al. (384 additional authors not shown)
Abstract:
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/ch…
▽ More
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented.
A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
Stability of xenon oxides at high pressures
Authors:
Qiang Zhu,
Daniel Y. Jung,
Artem R. Oganov,
Colin W. Glass,
Carlo Gatti,
Andriy O. Lyakhov
Abstract:
Xenon, which is quite inert under ambient conditions, may become reactive under pressure. The possibility of formation of stable xenon oxides and silicates in the interior of the Earth could explain the atmospheric missing xenon paradox. Using the ab initio evolutionary algorithm, we predict the thermodynamical stabilization of Xe-O compounds at high pressures (XeO, XeO2 and XeO3 at pressures abov…
▽ More
Xenon, which is quite inert under ambient conditions, may become reactive under pressure. The possibility of formation of stable xenon oxides and silicates in the interior of the Earth could explain the atmospheric missing xenon paradox. Using the ab initio evolutionary algorithm, we predict the thermodynamical stabilization of Xe-O compounds at high pressures (XeO, XeO2 and XeO3 at pressures above 83, 102 and 114 GPa, respectively). Our calculations indicate large charge transfer in these oxides, suggesting that large electronegativity difference and pressure are the key factors favoring the formation of xenon compounds. Xenon compounds in the Earth's mantle, however, cannot directly explain the missing xenon paradox: xenon oxides are unstable in equilibrium with metallic iron in the Earth's lower mantle, while xenon silicates are predicted to spontaneously decompose at all mantle pressures (<136 GPa). This does not preclude Xe atoms from being retained in defects of mantle silicates and oxides.
△ Less
Submitted 29 November, 2012; v1 submitted 28 November, 2012;
originally announced November 2012.
-
The high-pressure phase of boron, γ-B28: disputes and conclusions of 5 years after discovery
Authors:
Artem R. Oganov,
Vladimir L. Solozhenko,
Carlo Gatti,
Oleksandr O. Kurakevych,
Yann Le Godec
Abstract:
γ-B28 is a recently established high-pressure phase of boron. Its structure consists of icosahedral B12 clusters and B2 dumbbells in a NaCl-type arrangement (B2)δ+(B12)δ- and displays a significant charge transfer δ~0.5- 0.6. The discovery of this phase proved essential for the understanding and construction of the phase diagram of boron. γ-B28 was first experimentally obtained as a pure boron all…
▽ More
γ-B28 is a recently established high-pressure phase of boron. Its structure consists of icosahedral B12 clusters and B2 dumbbells in a NaCl-type arrangement (B2)δ+(B12)δ- and displays a significant charge transfer δ~0.5- 0.6. The discovery of this phase proved essential for the understanding and construction of the phase diagram of boron. γ-B28 was first experimentally obtained as a pure boron allotrope in early 2004 and its structure was discovered in 2006. This paper reviews recent results and in particular deals with the contentious issues related to the equation of state, hardness, putative isostructural phase transformation at ~40 GPa, and debates on the nature of chemical bonding in this phase. Our analysis confirms that (a) calculations based on density functional theory give an accurate description of its equation of state, (b) the reported isostructural phase transformation in γ-B28 is an artifact rather than a fact, (c) the best estimate of hardness of this phase is 50 GPa, (d) chemical bonding in this phase has a significant degree of ionicity. Apart from presenting an overview of previous results within a consistent view grounded in experiment, thermodynamics and quantum mechanics, we present new results on Bader charges in γ-B28 using different levels of quantum-mechanical theory (GGA, exact exchange, and HSE06 hybrid functional), and show that the earlier conclusion about significant degree of partial ionicity in this phase is very robust.
△ Less
Submitted 20 September, 2011; v1 submitted 14 September, 2011;
originally announced September 2011.
-
Measurement of $Γ(η\to π^+π^-γ)/Γ(η\to π^+π^-π^0)$ with KLOE experiment
Authors:
The KLOE Collaboration,
F. Ambrosino,
A. Antonelli,
M. Antonelli,
F. Archilli,
I. Balwierz,
G. Bencivenni,
C. Bini,
C. Bloise,
S. Bocchetta,
F. Bossi,
P. Branchini,
G. Capon,
T. Capussela,
F. Ceradini,
P. Ciambrone,
E. Czerwiski,
E. De Lucia,
A. De Santis,
P. De Simone,
G. De Zorzi,
A. Denig,
A. Di Domenico,
C. Di Donato,
B. Di Micco
, et al. (65 additional authors not shown)
Abstract:
We report the measurement of the ratio $Γ(η\to π^+π^-γ)/Γ(η\to π^+π^-π^0)$ analyzing a large sample of $φ\to ηγ$ decays recorded with the KLOE experiment at the DA$Φ$NE $e^+ e^-$ collider, corresponding to an integrated luminosity of 558 pb$^{-1}$. The $η\to π^+π^-γ$ process is supposed to proceed both via a resonant contribution, mediated by the $ρ$ meson, and a non resonant direct term, connecte…
▽ More
We report the measurement of the ratio $Γ(η\to π^+π^-γ)/Γ(η\to π^+π^-π^0)$ analyzing a large sample of $φ\to ηγ$ decays recorded with the KLOE experiment at the DA$Φ$NE $e^+ e^-$ collider, corresponding to an integrated luminosity of 558 pb$^{-1}$. The $η\to π^+π^-γ$ process is supposed to proceed both via a resonant contribution, mediated by the $ρ$ meson, and a non resonant direct term, connected to the box anomaly. The presence of the direct term affects the partial width value. Our result $R_η=Γ(η\to π^+ π^- γ)/Γ(η\to π^+ π^- π^0)= 0.1838\pm 0.0005_{stat} \pm 0.0030_{syst}$ is in agreement with a recent CLEO measurement, which differs by more 3 $σ$ from the average of previous results.
△ Less
Submitted 28 July, 2011;
originally announced July 2011.
-
Observation of the rare eta->e+e-e+e- decay with the KLOE experiment
Authors:
The KLOE Collaboration,
F. Ambrosino,
A. Antonelli,
M. Antonelli,
F. Archilli,
I. Balwierz,
G. Bencivenni,
C. Bini,
C. Bloise,
S. Bocchetta,
F. Bossi,
P. Branchini,
G. Capon,
T. Capussela,
F. Ceradini,
P. Ciambrone,
E. Czerwinski,
E. DeLucia,
A. DeSantis,
P. DeSimone,
G. DeZorzi,
A. Denig,
A. DiDomenico,
C. DiDonato,
B. DiMicco
, et al. (65 additional authors not shown)
Abstract:
We report the first observation of the rare eta->e+e-e+e- decay based on 1.7 fb^{-1} collected by the KLOE experiment at the DAFNE phi-factory. The selection of the e+e-e+e- final state is fully inclusive of radiation. We have identified 362 +- 29 events resulting in a branching ratio of (2.4 +- 0.2_stat+bckg +- 0.1_syst) x 10^{-5}.
We report the first observation of the rare eta->e+e-e+e- decay based on 1.7 fb^{-1} collected by the KLOE experiment at the DAFNE phi-factory. The selection of the e+e-e+e- final state is fully inclusive of radiation. We have identified 362 +- 29 events resulting in a branching ratio of (2.4 +- 0.2_stat+bckg +- 0.1_syst) x 10^{-5}.
△ Less
Submitted 21 October, 2011; v1 submitted 30 May, 2011;
originally announced May 2011.