-
Towards direct spatial and intensity characterization of ultra-high intensity laser pulses using ponderomotive scattering of free electrons
Authors:
A. Longman,
S. Ravichandran,
L. Manzo,
C. Z. He,
R. Lera,
N. McLane,
M. Huault,
G. Tiscareno,
D. Hanggi,
P. Spingola,
N. Czapla,
R. L. Daskalova,
L. Roso,
R. Fedosejevs,
W. T. Hill
Abstract:
Spatial distributions of electrons ionized and scattered from ultra-low pressure gases are proposed and experimentally demonstrated as a method to directly measure the intensity of an ultra-high intensity laser pulse. Analytic models relating the peak scattered electron energy to the peak laser intensity are derived and compared to paraxial Runge-Kutta simulations highlighting two models suitable…
▽ More
Spatial distributions of electrons ionized and scattered from ultra-low pressure gases are proposed and experimentally demonstrated as a method to directly measure the intensity of an ultra-high intensity laser pulse. Analytic models relating the peak scattered electron energy to the peak laser intensity are derived and compared to paraxial Runge-Kutta simulations highlighting two models suitable for describing electrons scattered from weakly paraxial beams ($f_{\#}>5$) for intensities in the range of $10^{18}-10^{21}$Wcm$^{-2}$. Scattering energies are shown to be dependant on gas species emphasizing the need for specific gases for given intensity ranges. Direct measurements of the laser intensity at full power of two laser systems is demonstrated both showing a good agreement between indirect methods of intensity measurement and the proposed method. One experiment exhibited the role of spatial aberrations in the scattered electron distribution motivating a qualitative study on the effect. We propose the use of convolutional neural networks as a method for extracting quantitative information of the spatial structure of the laser at full power. We believe the presented technique to be a powerful tool that can be immediately implemented in many high-power laser facilities worldwide.
△ Less
Submitted 17 July, 2023;
originally announced July 2023.
-
Imaging electron angular distributions to assess a full-power petawatt-class laser focus
Authors:
Smrithan Ravichandran,
Marine Huault,
Roberto Lera,
Calvin Z. He,
Andrew Longman,
Robert Fedosejevs,
Luis Roso,
Wendell T. Hill III
Abstract:
We present a novel technique to assess the focal volume of petawatt-class lasers at full power. Our approach exploits quantitative measurement of the angular distribution of electrons born in the focus via ionization of rarefied gas, which are accelerated forward and ejected ponderomotively by the field. We show that a bivariate ($θ, φ$) angular distribution, which was obtained with image plates,…
▽ More
We present a novel technique to assess the focal volume of petawatt-class lasers at full power. Our approach exploits quantitative measurement of the angular distribution of electrons born in the focus via ionization of rarefied gas, which are accelerated forward and ejected ponderomotively by the field. We show that a bivariate ($θ, φ$) angular distribution, which was obtained with image plates, not only enables the peak intensity to be extracted, but also reflects nonideality of the focal-spot intensity distribution. In our prototype demonstration at intensities of a few $\times 10^{19}$ to a few $\times 10^{20}$ $\mathrm{W/cm^2}$, an f/10 optic produced a focal spot in the paraxial regime. This allows a plane-wave parameterization of the peak intensity given by $\tan{θ_c} = 2/a_0$ ($a_0$ being the normalized vector potential and $θ_c$ the minimum ejection angle) to be compared with our measurements. Qualitative agreement was found using an $a_0$ inferred from the pulse energy, pulse duration and the focal spot distribution with a modified parameterization, $\tan{θ_c} = 2η/a_0$ ($η= 2.02^{+0.26}_{-0.22}$). This highlights the need for (i) better understanding of intensity degradation due to focal-spot distortions and (ii) more robust modeling of the ejection dynamics. Using single-shot detection of electrons, we showed that while there is significant shot-to-shot variation in the number of electrons ejected at a given angular position, the average distribution scales with the pulse energy in a way that is consistent with that seen with the image plates. Finally, we note that the asymptotic behavior as $θ\to 0^{\circ}$ limits the usability of angular measurement. For 800 nm, this limit is at an intensity $\sim 10^{21}\ \mathrm{W/cm^2}$.
△ Less
Submitted 27 September, 2023; v1 submitted 23 May, 2023;
originally announced May 2023.
-
A cylindrical implosion platform for the study of highly magnetized plasmas at LMJ
Authors:
G. Pérez-Callejo,
C. Vlachos,
C. A. Walsh,
R. Florido,
M. Bailly-Grandvaux,
X. Vaisseau,
F. Suzuki-Vidal,
C. McGuffey,
F. N. Beg,
P. Bradford,
V. Ospina-Bohórquez,
D. Batani,
D. Raffestin,
A. Colaïtis,
V. Tikhonchuk,
A. Casner,
M. Koenig,
B. Albertazzi,
R. Fedosejevs,
N. Woolsey,
M. Ehret,
A. Debayle,
P. Loiseau,
A. Calisti,
S. Ferri
, et al. (5 additional authors not shown)
Abstract:
Investigating the potential benefits of the use of magnetic fields in Inertial Confinement Fusion (ICF) experiments has given rise to new experimental platforms like the Magnetized Liner Inertial Fusion (MagLIF) approach at the Z-machine (Sandia National Laboratories), or its laser-driven equivalent at OMEGA (Laboratory for Laser Energetics). Implementing these platforms at MJ-scale laser faciliti…
▽ More
Investigating the potential benefits of the use of magnetic fields in Inertial Confinement Fusion (ICF) experiments has given rise to new experimental platforms like the Magnetized Liner Inertial Fusion (MagLIF) approach at the Z-machine (Sandia National Laboratories), or its laser-driven equivalent at OMEGA (Laboratory for Laser Energetics). Implementing these platforms at MJ-scale laser facilities, such as the Laser MegaJoule (LMJ) or the National Ignition Facility (NIF), is crucial to reaching self-sustained nuclear fusion and enlarges the level of magnetization that can be achieved through a higher compression. In this paper, we present a complete design of an experimental platform for magnetized implosions using cylindrical targets at LMJ. A seed magnetic field is generated along the axis of the cylinder using laser-driven coil targets, minimizing debris and increasing diagnostic access compared with pulsed power field generators. We present a comprehensive simulation study of the initial B-field generated with these coil targets, as well as 2-dimensional extended magneto-hydrodynamics (MHD) simulations showing that a 5T initial B-field is compressed up to 25kT during the implosion. Under these circumstances, the electrons become magnetized, which severely modifies the plasma conditions at stagnation. In particular, in the hot spot the electron temperature is increased (from 1keV to 5keV) while the density is reduced (from 40gcc to 7gcc). We discuss how these changes can be diagnosed using X-ray imaging and spectroscopy, and particle diagnostics. We propose the simultaneous use of two dopants in the fuel (Ar and Kr) to act as spectroscopic tracers. We show that this introduces an effective spatial resolution in the plasma which permits an unambiguous observation of the B-field effects. Additionally, we present a plan for future experiments of this kind at LMJ.
△ Less
Submitted 1 July, 2022; v1 submitted 22 March, 2022;
originally announced March 2022.
-
Towards a direct measurement of the quantum vacuum Lagrangian coupling coefficients using two counter propagating super-intense laser pulses
Authors:
Luis Roso,
Roberto Lera,
Smrithan Ravichandran,
Andrew Longman,
Calvin Z He,
José Antonio Pérez-Hernández,
Jon I Apiñaniz,
Lucas D Smith,
Robert Fedosejevs,
Wendell T Hill, III
Abstract:
In this paper we will show that photon-photon collision experiments using extreme lasers can provide measurable effects giving fundamental information about the essence of QED, its Lagrangian. A possible scenario with two counterpropagating ultraintense lasers for an experiment to detect scattering between optical photons is analyzed. We discuss the importance of the pulse widths and waists, the b…
▽ More
In this paper we will show that photon-photon collision experiments using extreme lasers can provide measurable effects giving fundamental information about the essence of QED, its Lagrangian. A possible scenario with two counterpropagating ultraintense lasers for an experiment to detect scattering between optical photons is analyzed. We discuss the importance of the pulse widths and waists, the best scenario for overlapping the beams and signal detection, as well as ways to distinguish the signal from the noise. This would need a high-precision measurement, with control of temporal jitter and noise. We conclude that such experiment is barely feasible at 10^{23} W/cm^2 and very promising at 10^{24} W/cm^2
△ Less
Submitted 15 December, 2021;
originally announced December 2021.
-
Kilo-Tesla axial magnetic field generation with high intensity spin and orbital angular momentum beams
Authors:
Andrew Longman,
Robert Fedosejevs
Abstract:
Absorption of angular momentum from a high intensity laser pulse can lead to the generation of strong axial magnetic fields in plasma. The effect, known as the inverse Faraday effect can generate kilo-Tesla strength, multi-picosecond, axial magnetic fields extending over hundreds of microns in underdense plasma. In this paper we explore the effect with ultra-high intensity circularly polarized Gau…
▽ More
Absorption of angular momentum from a high intensity laser pulse can lead to the generation of strong axial magnetic fields in plasma. The effect, known as the inverse Faraday effect can generate kilo-Tesla strength, multi-picosecond, axial magnetic fields extending over hundreds of microns in underdense plasma. In this paper we explore the effect with ultra-high intensity circularly polarized Gaussian beams and linearly polarized orbital angular momentum beams comparing analytic expressions with 3D particle-in-cell simulations. We develop a model for the transverse magnetic field profiles, introduce a new model for the temporal decay, and show that while the magnetic field strength is independent of plasma density, it has a strong dependence on the laser beam waist.
△ Less
Submitted 25 November, 2021;
originally announced November 2021.
-
A quasi-monoenergetic short time duration compact proton source for probing high energy density states of matter
Authors:
J. I. Apiñaniz,
S. Malko,
R. Fedosejevs,
W. Cayzac,
X. Vaisseau,
D. de Luis,
G. Gatti,
C. McGuffey,
M. Bailly-Grandvaux,
K. Bhutwala,
V. Ospina-Bohorquez,
J. Balboa,
J. J. Santos,
D. Batani,
F. Beg,
L. Roso,
J. A. Perez-Hernandez,
L. Volpe
Abstract:
We report on the development of a highly directional, narrow energy band, short time duration proton beam operating at high repetition rate, suitable for measurements of stopping power in high energy density plasmas as well as other applications. The protons are generated with an ultrashort-pulse laser interacting with a solid target and converted to a pencil-like narrow-band beam using a compact…
▽ More
We report on the development of a highly directional, narrow energy band, short time duration proton beam operating at high repetition rate, suitable for measurements of stopping power in high energy density plasmas as well as other applications. The protons are generated with an ultrashort-pulse laser interacting with a solid target and converted to a pencil-like narrow-band beam using a compact magnet-based energy selector. We experimentally demonstrate the production of a proton beam with an energy of 500 keV and energy spread well below 10%, and a pulse duration of 260 ps. The energy loss of this beam is measured in a 2 $μ$m thick solid Mylar target and found to be in within 1% of theoretical predictions. The short time duration of the proton pulse makes it particularly well suited for applications involving the probing of highly transient plasma states produced in laser-matter interaction experiments, in particular measurements of proton stopping power.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Optimal Laguerre-Gaussian Modes for High-Intensity Optical Vortices
Authors:
Andrew Longman,
Robert Fedosejevs
Abstract:
With increasing interest in using orbital angular momentum (OAM) modes in high-power laser systems, accurate mathematical descriptions of the high-intensity modes at focus are required for realistic modelling. In this work, we derive various high intensity orbital angular momentum focal spot intensity distributions generated by Gaussian, super-Gaussian, and ideal flat-top beams common to high-powe…
▽ More
With increasing interest in using orbital angular momentum (OAM) modes in high-power laser systems, accurate mathematical descriptions of the high-intensity modes at focus are required for realistic modelling. In this work, we derive various high intensity orbital angular momentum focal spot intensity distributions generated by Gaussian, super-Gaussian, and ideal flat-top beams common to high-power laser systems. These intensity distributions are then approximated using fitted Laguerre-Gaussian basis functions as a practical way for describing high-power OAM beams in theoretical and numerical models.
△ Less
Submitted 7 February, 2020;
originally announced February 2020.
-
Off-Axis Spiral Phase Mirrors for Generating High Intensity Optical Vortices
Authors:
Andrew Longman,
Carlos Salgado,
Ghassan Zeraouli,
Jon. I. Apinaniz,
Jose Antonio Perez-Hernandez,
M. Khairy Eltahlawy,
Luca Volpe,
Robert Fedosejevs
Abstract:
In this work, we present a novel and practical method for generating optical vortices in high-power laser systems. Off-axis spiral phase mirrors are used at oblique angles of incidence in the beam path after amplification and compression allowing for the generation of high-power optical vortices in almost any laser system. An off-axis configuration is possible via modification of the azimuthal gra…
▽ More
In this work, we present a novel and practical method for generating optical vortices in high-power laser systems. Off-axis spiral phase mirrors are used at oblique angles of incidence in the beam path after amplification and compression allowing for the generation of high-power optical vortices in almost any laser system. An off-axis configuration is possible via modification of the azimuthal gradient of the spiral phase helix and is demonstrated with a simple model using a discrete spiral staircase. This work presents the design, fabrication, and implementation of off-axis spiral phase mirrors in both low and high-power laser systems.
△ Less
Submitted 21 January, 2020;
originally announced January 2020.
-
Towards an in situ, full-power gauge of the focal-volume intensity of petawatt-class lasers
Authors:
C. Z. He,
A. Longman,
J. A. Pérez-Hernández,
M. De Marco,
C. Salgado,
G. Zeraouli,
G. Gatti,
L. Roso,
R. Fedosejevs,
W. T. Hill III
Abstract:
About 50 years ago, Sarachick and Schappert [Phys. Rev. D. 1, 2738 (1970)] showed that relativistic Thomson scattering leads to wavelength shifts that are proportional to the laser intensity. About 28 years later Chen et al. [Nature 396, 653 (1998)] used these shifts to estimate their laser intensity near 10^18 W/cm^2. More recently there have been several theoretical studies aimed at exploiting n…
▽ More
About 50 years ago, Sarachick and Schappert [Phys. Rev. D. 1, 2738 (1970)] showed that relativistic Thomson scattering leads to wavelength shifts that are proportional to the laser intensity. About 28 years later Chen et al. [Nature 396, 653 (1998)] used these shifts to estimate their laser intensity near 10^18 W/cm^2. More recently there have been several theoretical studies aimed at exploiting nonlinear Thomson scattering as a tool for direct measurement of intensities well into the relativistic regime. We present the first quantitative study of this approach for intensities between 10^18 and 10^19 W/cm^2. We show that the spectral shifts are in reasonable agreement with estimates of the peak intensity extracted from images of the focal area obtained at reduced power. Finally, we discuss the viability of the approach, its range of usefulness and how it might be extended to gauge intensities well in excess of 10^19 W/cm^2.
△ Less
Submitted 24 October, 2019; v1 submitted 31 July, 2019;
originally announced August 2019.
-
Generation of high energy laser-driven electron and proton sources with the 200 TW system VEGA 2 at the Centro de Laseres Pulsados
Authors:
L. Volpe,
R. Fedosejevs,
G. Gatti,
J. A. Pérez-Hernández,
C. Méndez,
J. Apiñaniz,
X. Vaisseau,
C. Salgado,
M. Huault,
S. Malko,
G. Zeraouli,
V. Ospina,
A. Longman,
D. De Luis,
K. Li,
O. Varela,
E. García,
I. Hernández,
J. D. Pisonero,
J. García Ajates,
J. M. Alvarez,
C. García,
M. Rico,
D. Arana,
J. Hernández-Toro
, et al. (1 additional authors not shown)
Abstract:
The Centro de Laseres Pulsados in Salamanca Spain has recently started operation phase and the first User access period on the 6 J 30 fs 200 TW system (VEGA 2) already started at the beginning of 2018. In this paper we report on two commissioning experiments recently performed on the VEGA 2 system in preparation for the user campaign. VEGA 2 system has been tested in different configurations depen…
▽ More
The Centro de Laseres Pulsados in Salamanca Spain has recently started operation phase and the first User access period on the 6 J 30 fs 200 TW system (VEGA 2) already started at the beginning of 2018. In this paper we report on two commissioning experiments recently performed on the VEGA 2 system in preparation for the user campaign. VEGA 2 system has been tested in different configurations depending on the focusing optics and targets used. One configuration (long focal length f=130 cm) is for under-dense laser-matter interaction where VEGA 2 is focused onto a low density gas-jet generating electron beams (via laser wake field acceleration mechanism) with maximum energy up to 500 MeV and an X-ray betatron source with a 10 keV critical energy. A second configuration (short focal length f=40 cm) is for over-dense laser-matter interaction where VEGA 2 is focused onto an 5 microns thick Al target generating a proton beam with a maximum energy of 10 MeV and average energy of 7-8 MeV and temperature of 2.5 MeV. In this paper we present preliminary experimental results.
△ Less
Submitted 11 November, 2018;
originally announced November 2018.
-
Development of an adjustable Kirkpatrick-Baez microscope for laser driven x-ray sources at CLPU
Authors:
G. Zeraouli,
G. gatti,
A. Longman,
J. A. Perez,
D. Arana,
D. Batani,
L. Volpe,
L. Roso,
R. Fedosejevs
Abstract:
A promising prototype of a highly adjustable Kirkpatrick-Baez (KB) microscope has been designed, built and tested in a number of laser driven x-ray experiments using the high power (200TW) VEGA-2 laser system of the Spanish Centre for Pulsed Lasers (CLPU). The presented KB version consists of two, perpendicularly mounted, 500μm thick Silicon wafers, coated with a few tens of nm layer of Platinum u…
▽ More
A promising prototype of a highly adjustable Kirkpatrick-Baez (KB) microscope has been designed, built and tested in a number of laser driven x-ray experiments using the high power (200TW) VEGA-2 laser system of the Spanish Centre for Pulsed Lasers (CLPU). The presented KB version consists of two, perpendicularly mounted, 500μm thick Silicon wafers, coated with a few tens of nm layer of Platinum unlike the conventional, coated, millimetre thick glass substrates, affording more bending flexibility and large adjustment range. According to simulations, and based on total external reflection, this KB offers a broad-band multi-keV reflection spectra, allowing more spectral tunablity than conventional Bragg crystals. In addition to be vacuum compatible, the prototype is characterised by a relatively small size (21cm x 31cm x 27cm) and permits remote control and modification of both the radius of curvature (down to 10m) and the grazing incidence angle (up to 60mrad). A few examples of focusing performance tests, limitations and experimental campaign results are discussed.
△ Less
Submitted 12 November, 2018;
originally announced November 2018.
-
Collisionless shock acceleration of narrow energy spread ion beams from mixed species plasmas using 1 $μ$m lasers
Authors:
A. Pak,
S. Kerr,
N. Lemos,
A. Link,
P. Patel,
F. Albert,
L. Divol,
B. B. Pollock,
D. Haberberger,
D. Froula,
M. Gauthier,
S. H. Glenzer,
A. Longman,
L. Manzoor,
R. Fedosejevs,
S. Tochitsky,
C. Joshi,
F. Fiuza
Abstract:
Collisionless shock acceleration of protons and C$^{6+}$ ions has been achieved by the interaction of a 10$^{20}$ W/cm$^2$, 1 $μ$m laser with a near-critical density plasma. Ablation of the initially solid density target by a secondary laser allowed for systematic control of the plasma profile. This enabled the production of beams with peaked spectra with energies of 10-18 MeV/a.m.u. and energy sp…
▽ More
Collisionless shock acceleration of protons and C$^{6+}$ ions has been achieved by the interaction of a 10$^{20}$ W/cm$^2$, 1 $μ$m laser with a near-critical density plasma. Ablation of the initially solid density target by a secondary laser allowed for systematic control of the plasma profile. This enabled the production of beams with peaked spectra with energies of 10-18 MeV/a.m.u. and energy spreads of 10-20$\%$ with up to 3x10$^9$ particles within these narrow spectral features. The narrow energy spread and similar velocity of ion species with different charge-to-mass ratio are consistent with acceleration by the moving potential of a shock wave. Particle-in-cell simulations show shock accelerated beams of protons and C$^{6+}$ ions with energy distributions consistent with the experiments. Simulations further indicate the plasma profile determines the trade-off between the beam charge and energy and that with additional target optimization narrow energy spread beams exceeding 100 MeV/a.m.u. can be produced using the same laser conditions.
△ Less
Submitted 18 October, 2018;
originally announced October 2018.
-
Dual-Band Quasi-Coherent Radiative Thermal Source
Authors:
Ryan Starko-Bowes,
Jin Dai,
Ward Newman,
Sean Molesky,
Limei Qi,
Aman Satija,
Ying Tsui,
Manisha Gupta,
Robert Fedosejevs,
Sandipan Pramanik,
Yi Xuan,
Zubin Jacob
Abstract:
Thermal radiation from an unpatterned object is similar to that of a gray body. The thermal emission is insensitive to polarization, shows only Lambertian angular dependence, and is well modeled as the product of the blackbody distribution and a scalar emissivity over large frequency bands. Here, we design, fabricate and experimentally characterize the spectral, polarization, angular and temperatu…
▽ More
Thermal radiation from an unpatterned object is similar to that of a gray body. The thermal emission is insensitive to polarization, shows only Lambertian angular dependence, and is well modeled as the product of the blackbody distribution and a scalar emissivity over large frequency bands. Here, we design, fabricate and experimentally characterize the spectral, polarization, angular and temperature dependence of a microstructured SiC dual band thermal infrared source, achieving independent control of the frequency and polarization of thermal radiation in two spectral bands. The measured emission of the device in the Reststrahlen band (10.3-12.7 um) selectively approaches that of a blackbody, peaking at an emissivity of 0.85 at Lx=11.75 um and 0.81 at Ly=12.25 um. This effect arises due to the thermally excited phonon polaritons in silicon carbide. The control of thermal emission properties exhibited by the design is well suited for applications requiring infrared sources, gas or temperature sensors and nanoscale heat transfer. Our work paves the way for future silicon carbide based thermal metasurfaces.
△ Less
Submitted 26 May, 2018;
originally announced May 2018.
-
Thermal graphene metamaterials and epsilon-near-zero high temperature plasmonics
Authors:
Sarang Pendharker,
Huan Hu,
Sean Molesky,
Ryan Starko-Bowes,
Zohreh Poursoti,
Sandipan Pramanik,
Neda Nazemifard,
Robert Fedosejevs,
Thomas Thundat,
Zubin Jacob
Abstract:
The key feature of a thermophotovoltaic (TPV) emitter is the enhancement of thermal emission corresponding to energies just above the bandgap of the absorbing photovoltaic cell and simultaneous suppression of thermal emission below the bandgap. We show here that a single layer plasmonic coating can perform this task with high efficiency. Our key design principle involves tuning the epsilon-near-ze…
▽ More
The key feature of a thermophotovoltaic (TPV) emitter is the enhancement of thermal emission corresponding to energies just above the bandgap of the absorbing photovoltaic cell and simultaneous suppression of thermal emission below the bandgap. We show here that a single layer plasmonic coating can perform this task with high efficiency. Our key design principle involves tuning the epsilon-near-zero frequency (plasma frequency) of the metal acting as a thermal emitter to the electronic bandgap of the semiconducting cell. This approach utilizes the change in reflectivity of a metal near its plasma frequency (epsilon-near-zero frequency) to lead to spectrally selective thermal emission and can be adapted to large area coatings using high temperature plasmonic materials. We provide a detailed analysis of the spectral and angular performance of high temperature plasmonic coatings as TPV emitters. We show the potential of such high temperature plasmonic thermal emitter coatings (p-TECs) for narrowband near-field thermal emission. We also show the enhancement of near-surface energy density in graphene-multilayer thermal metamaterials due to a topological transition at an effective epsilon-near-zero frequency. This opens up spectrally selective thermal emission from graphene multilayers in the infrared frequency regime. Our design paves the way for the development of single layer p-TECs and graphene multilayers for spectrally selective radiative heat transfer applications.
△ Less
Submitted 5 February, 2017;
originally announced February 2017.
-
Optical Characterization of Epsilon-Near-Zero, Epsilon-Near-Pole and Hyperbolic Response in Nanowire Metamaterials
Authors:
Ryan Starko-Bowes,
Jon Atkinson,
Ward Newman,
Huan Hu,
Themos Kallos,
George Palikaras,
Robert Fedosejevs,
Sandipan Pramanik,
Zubin Jacob
Abstract:
We report on the optical and physical characterization of metallic nanowire (NW) metamaterials fabricated by electrodeposition of ~30 nm diameter gold nanowires in nano-porous anodic aluminum oxide. We observe a uniaxial anisotropic dielectric response for the NW metamaterials that displays both epsilon-near-zero (ENZ) and epsilon-near-pole (ENP) resonances. We show that a fundamental difference i…
▽ More
We report on the optical and physical characterization of metallic nanowire (NW) metamaterials fabricated by electrodeposition of ~30 nm diameter gold nanowires in nano-porous anodic aluminum oxide. We observe a uniaxial anisotropic dielectric response for the NW metamaterials that displays both epsilon-near-zero (ENZ) and epsilon-near-pole (ENP) resonances. We show that a fundamental difference in the behavior of NW-metamaterials from metal-dielectric multilayer (ML) metamaterials is the differing directions of the epsilon-near-zero (ENZ) and epsilon-near-pole (ENP) dielectric responses relative to the optical axis of the effective dielectric tensor. In contrast to multilayer metamaterials, nanowire metamaterials exhibit an omnidirectional ENP and an angularly dependent ENZ. Also in contrast to ML metamaterials, the NW metamaterials exhibit ENP and ENZ resonances that are highly absorptive and can be effectively excited from free space. Our fabrication allows a large tunability of the epsilon-near-zero resonance in the visible and near IR spectrum from 583 nm to 805 nm as the gold nanorod fill fraction changes from 26% to 10.5%. We support our fabrication process flow at each step with rigorous physical and optical characterization. Energy dispersive X-ray (EDX) and X-ray diffraction (XRD) analyses are used to ascertain the quality of electrochemically deposited Au nanowires prior to and after annealing. Our experimental results are in agreement with simulations of the periodic plasmonic crystal and also analytical calculations in the effective medium metamaterial limit. We also experimentally characterize the role of spatial dispersion at the ENZ resonance and show that the effect does not occur for the ENP resonance. The application of these materials to the fields of biosensing, quantum optics and thermal devices shows considerable promise.
△ Less
Submitted 11 November, 2015;
originally announced November 2015.
-
GeV electrons due to a transition from laser wakefield acceleration to plasma wakefield acceleration
Authors:
P. E. Masson-Laborde,
M. Z. Mo,
A. Ali,
S. Fourmaux,
P. Lassonde,
J. C. Kieffer,
W. Rozmus,
D. Teychenne,
R. Fedosejevs
Abstract:
We show through experiments that a transition from laser wakefield acceleration (LWFA) regime to a plasma wakefield acceleration (PWFA) regime can drive electrons up to energies close to the GeV level. Initially, the acceleration mechanism is dominated by the bubble created by the laser in the nonlinear regime of LWFA, leading to an injection of a large number of electrons. After propagation beyon…
▽ More
We show through experiments that a transition from laser wakefield acceleration (LWFA) regime to a plasma wakefield acceleration (PWFA) regime can drive electrons up to energies close to the GeV level. Initially, the acceleration mechanism is dominated by the bubble created by the laser in the nonlinear regime of LWFA, leading to an injection of a large number of electrons. After propagation beyond the depletion length, leading to a depletion of the laser pulse, whose transverse ponderomotive force is not able to sustain the bubble anymore, the high energy dense bunch of electrons propagating inside bubble will drive its own wakefield by a PWFA regime. This wakefield will be able to trap and accelerate a population of electrons up to the GeV level during this second stage. Three dimensional (3D) particle-in-cell (PIC) simulations support this analysis, and confirm the scenario.
△ Less
Submitted 6 August, 2014;
originally announced August 2014.