-
New developments on the Ingot WFS laboratory testing
Authors:
Tânia Gomes Machado,
Simone Di Filippo,
Kalyan K. R. Santhakumari,
Maria Bergomi,
Davide Greggio,
Elisa Portaluri,
Dheeraj Malik,
César Nesme,
Carmelo Arcidiacono,
Alessandro Ballone,
Federico Battaini,
Valentina Viotto,
Roberto Ragazzoni,
Marco Dima,
Luca Marafatto,
Jacopo Farinato,
Demetrio Magrin,
Luigi Lessio,
Gabriele Umbriaco
Abstract:
The Ingot WFS was designed to overcome some of the challenges present in classical wavefront sensors when they deal with sodium LGSs. This innovative sensor works by sensing the full 3D volume of the elongated LGS and is suitable for use in very large telescopes. A test bench has been assembled at the INAF - Osservatorio Astronomico di Padova laboratories to test and characterize the functioning o…
▽ More
The Ingot WFS was designed to overcome some of the challenges present in classical wavefront sensors when they deal with sodium LGSs. This innovative sensor works by sensing the full 3D volume of the elongated LGS and is suitable for use in very large telescopes. A test bench has been assembled at the INAF - Osservatorio Astronomico di Padova laboratories to test and characterize the functioning of the Ingot WFS. In this work, we summarize the main results of the tests performed on a new search algorithm. Then, we move towards a more accurate simulation of the sodium LGS by replicating real time-varying sodium layer profiles. The study of their impact on the ingot pupil signals is described in this work.
△ Less
Submitted 8 October, 2024;
originally announced October 2024.
-
Pupil plane WFSs for LGS systems of giant telescopes: the case of Ingot
Authors:
Elisa Portaluri,
Roberto Ragazzoni,
Davide Greggio,
Carmelo Arcidiacono,
Maria Bergomi,
Simone Di Filippo,
Marco Dima,
Jacopo Farinato,
Tânia Gomes Machado,
Demetrio Magrin,
Kalyan K. R. Santhakumari,
Valentina Viotto
Abstract:
The Ingot WFS belongs to a class of pupil-plane WFSs designed to address the challenges posed by Sodium Laser Guide Stars, and consists of a combination of refractive and reflective surfaces, arranged into a complex prismatic shape that extends in three dimensions. Specifically, it leverages the Scheimpflug principle to sense the full 3D volume of such elongated, time-varying sources, thus optimiz…
▽ More
The Ingot WFS belongs to a class of pupil-plane WFSs designed to address the challenges posed by Sodium Laser Guide Stars, and consists of a combination of refractive and reflective surfaces, arranged into a complex prismatic shape that extends in three dimensions. Specifically, it leverages the Scheimpflug principle to sense the full 3D volume of such elongated, time-varying sources, thus optimizing the performance of the next-generation AO-assisted giant telescopes. In this work we discuss the geometrical and optical motivations endorsing the development of this class of WFSs, showing the different configurations we propose to the AO community. We also provide a first order comparative analysis with other approaches and review the state-of-the-art of the Ingot project, including improvements made in the laboratory and future milestones.
△ Less
Submitted 8 October, 2024;
originally announced October 2024.
-
Final Alignment and Image Quality Test for the Acquisition and Guiding System of SOXS
Authors:
J. A. Araiza-Duran,
G. Pignata,
A. Brucalassi,
M. Aliverti,
F. Battaini,
K. Radhakrishnan,
S. Di Filippo,
L. Lessio,
R. Claudi,
D. Ricci,
M. Colapietro,
R. Cosentino,
S. D'Orsi,
M. Munari,
M. Dima,
P. Schipani,
S. Campana,
A. Baruffolo,
R. Zanmar Sanchez,
M. Riva,
M. Genoni,
S. Ben-Ami,
A. Rubin,
R. Bruch,
G. Capasso
, et al. (28 additional authors not shown)
Abstract:
SOXS (Son Of X-Shooter) will be the new medium-resolution (R 4500 for 1 slit), high-efficiency, wide-band spectrograph for the ESO NTT at La Silla Observatory, Chile. It will be dedicated to the follow-up of any kind of transient events, ensuring fast time, high efficiency, and availability. It consists of a central structure (common path) that supports two spectrographs optimized for the UV-Visib…
▽ More
SOXS (Son Of X-Shooter) will be the new medium-resolution (R 4500 for 1 slit), high-efficiency, wide-band spectrograph for the ESO NTT at La Silla Observatory, Chile. It will be dedicated to the follow-up of any kind of transient events, ensuring fast time, high efficiency, and availability. It consists of a central structure (common path) that supports two spectrographs optimized for the UV-Visible and a Near-Infrared range. Attached to the common path is the Acquisition and Guiding Camera system (AC), equipped with a filter wheel that can provide science-grade imaging and moderate high-speed photometry. The AC Unit was integrated and aligned during the summer months of 2022 and has since been mounted in the NTTs telescope simulator. This work gives an update on the Acquisition Camera Unit status, describes the Image Quality Tests that were performed, and discusses the AC Optical Performance.
△ Less
Submitted 24 July, 2024;
originally announced July 2024.
-
The integration of the SOXS control electronics towards the PAE
Authors:
Mirko Colapietro,
Sergio D'Orsi,
Giulio Capasso,
Salvatore Savarese,
Pietro Schipani,
Laurent Marty,
Ricardo Zanmar Sanchez,
Matteo Aliverti,
Federico Battaini,
Simone Di Filippo,
Kalyan Kumar Radhakrishnan Santhakumari,
Davide Ricci,
Bernardo Salasnich,
Sergio Campana,
Riccardo Claudi,
Jose Araiza-Duran,
Andrea Baruffolo,
Sagi Ben Ami,
Alex Bichkovsky,
Anna Brucalassi,
Rosario Cosentino,
Francesco D'Alessio,
Paolo D'Avanzo,
Rosario Di Benedetto,
Matteo Genoni
, et al. (29 additional authors not shown)
Abstract:
SOXS (Son Of X-Shooter) is the new single object spectrograph for the ESO New Technology Telescope (NTT) at the La Silla Observatory, able to cover simultaneously both the UV-VIS and NIR bands (350-2000 nm). The instrument is currently in the integration and test phase, approaching the Preliminary Acceptance in Europe (PAE) before shipment to Chile for commissioning. After the assembly and prelimi…
▽ More
SOXS (Son Of X-Shooter) is the new single object spectrograph for the ESO New Technology Telescope (NTT) at the La Silla Observatory, able to cover simultaneously both the UV-VIS and NIR bands (350-2000 nm). The instrument is currently in the integration and test phase, approaching the Preliminary Acceptance in Europe (PAE) before shipment to Chile for commissioning. After the assembly and preliminary test of the control electronics at INAF - Astronomical Observatory of Capodimonte (Napoli), the two main control cabinets of SOXS are now hosted in Padova, connected to the real hardware. This contribution describes the final electronic cabinets layout, the control strategy and the different integration phases, waiting for the Preliminary Acceptance in Europe and the installation of the instrument in Chile.
△ Less
Submitted 24 July, 2024;
originally announced July 2024.
-
What is your favorite transient event? SOXS is almost ready to observe!
Authors:
Kalyan Kumar Radhakrishnan Santhakumari,
Federico Battaini,
Simone Di Filippo,
Silvio Di Rosa,
Lorenzo Cabona,
Riccardo Claudi,
Luigi Lessio,
Marco Dima,
David Young,
Marco Landoni,
Mirko Colapietro,
Sergio D'Orsi,
Matteo Aliverti,
Matteo Genoni,
Matteo Munari,
Ricardo Zanmar Sanchez,
Fabrizio Vitali,
Davide Ricci,
Pietro Schipani,
Sergio Campana,
Jani Achren,
Jose Araiza-Duran,
Iair Arcavi,
Andrea Baruffolo,
Sagi Ben-Ami
, et al. (34 additional authors not shown)
Abstract:
The Son Of X-Shooter (SOXS) will be the specialized facility to observe any transient event with a flexible scheduler at the ESO New Technology Telescope (NTT) at La Silla, Chile. SOXS is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R~4500 for a 1arcsec slit. SOXS also has imaging capabilitie…
▽ More
The Son Of X-Shooter (SOXS) will be the specialized facility to observe any transient event with a flexible scheduler at the ESO New Technology Telescope (NTT) at La Silla, Chile. SOXS is a single object spectrograph offering simultaneous spectral coverage in UV-VIS (350-850 nm) and NIR (800-2000 nm) wavelength regimes with an average of R~4500 for a 1arcsec slit. SOXS also has imaging capabilities in the visible wavelength regime. Currently, SOXS is being integrated at the INAF-Astronomical Observatory of Padova. Subsystem- and system-level tests and verification are ongoing to ensure and confirm that every requirement and performance are met. In this paper, we report on the integration and verification of SOXS as the team and the instrument prepare for the Preliminary Acceptance Europe (PAE).
△ Less
Submitted 24 July, 2024;
originally announced July 2024.
-
The status of the NIR arm of the SOXS Instrument toward the PAE
Authors:
Fabrizio Vitali,
Matteo Genoni,
Matteo Aliverti,
Kalyan Radhakrishnan,
Federico Battaini,
Paolo D'Avanzo,
Francesco D'Alessio,
Giorgio Pariani,
Luca Oggioni,
Salvatore Scuderi,
Davide Ricci,
Eugenio Martinetti,
Antonio Miccichè,
Gaetano Nicotra,
Mirko Colapietro,
Sergio D'Orsi,
Matteo Munari,
Luigi Lessio,
Simone Di Filippo,
Andrea Scaudo,
Giancarlo Bellassai,
Rosario Di Benedetto,
Giovanni Occhipinti,
Marco Landoni,
Matteo Accardo
, et al. (35 additional authors not shown)
Abstract:
The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory [1]. It offers a simultaneous spectral coverage over 350-2000 nm, with two separate spectrographs. In this paper we present the status of the Near InfraRed (NIR) cryogenic echelle cross-dispersed spectrograph [1], in the range 0.8…
▽ More
The Son Of X-Shooter (SOXS) is a single object spectrograph, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory [1]. It offers a simultaneous spectral coverage over 350-2000 nm, with two separate spectrographs. In this paper we present the status of the Near InfraRed (NIR) cryogenic echelle cross-dispersed spectrograph [1], in the range 0.80-2.00 μm with 15 orders, equipped with an 2k x 2k Hawaii H2RG IR array from Teledyne, working at 40K, that is currently assembled and tested on the SOXS instrument, in the premises of INAF in Padova. We describe the different tests and results of the cryo, vacuum, opto-mechanics and detector subsystems that finally will be part of the PAE by ESO.
△ Less
Submitted 24 July, 2024;
originally announced July 2024.
-
Automated scheduler for the SOXS instrument: design and performance
Authors:
Laura Asquini,
Marco Landoni,
Dave Young,
Laurent Marty,
Stephen J. Smartt,
Sergio Campana,
Riccardo Claudi,
Pietro Schipani,
Jani Achren,
Matteo Aliverti,
Jose A. Araiza Duran,
Iair Arcavi,
Federico Battaini,
Andrea Baruffolo,
Sagi Ben Ami,
Andrea Bianco,
Alex Bichkovsky,
Anna Brucalassi,
Rachel Bruch,
Giulio Capasso,
Enrico Cappellaro,
Mirko Colapietro,
Rosario Cosentino,
Francesco DÁlessio,
Paolo D'Avanzo
, et al. (27 additional authors not shown)
Abstract:
We present the advancements in the development of the scheduler for the Son Of X-shooter instrument at the ESO-NTT 3.58-m telescope in La Silla, Chile. SOXS is designed as a single-object spectroscopic facility and features a high-efficiency spectrograph with two arms covering the spectral range of 350-2000 nm and a mean resolving power of approximately R=4500. It will conduct UV-visible and near-…
▽ More
We present the advancements in the development of the scheduler for the Son Of X-shooter instrument at the ESO-NTT 3.58-m telescope in La Silla, Chile. SOXS is designed as a single-object spectroscopic facility and features a high-efficiency spectrograph with two arms covering the spectral range of 350-2000 nm and a mean resolving power of approximately R=4500. It will conduct UV-visible and near-infrared follow-up observations of astrophysical transients, drawing from a broad pool of targets accessible through the streaming services of wide-field telescopes, both current and future, as well as high-energy satellites. The instrument will cater to various scientific objectives within the astrophysical community, each entailing specific requirements for observation planning. SOXS will operate at the European Southern Observatory (ESO) in La Silla, without the presence of astronomers on the mountain. This poses a unique challenge for the scheduling process, demanding a fully automated algorithm that is autonomously interacting with the appropriate databases and the La Silla Weather API, and is capable of presenting the operator not only with an ordered list of optimal targets (in terms of observing constraints) but also with optimal backups in the event of changing weather conditions. This imposes the necessity for a scheduler with rapid-response capabilities without compromising the optimization process, ensuring the high quality of observations and best use of the time at the telescope. We thus developed a new highly available and scalable architecture, implementing API Restful applications like Docker Containers, API Gateway, and Python-based Flask frameworks. We provide an overview of the current state of the scheduler, which is now ready for the approaching on-site testing during Commissioning phase, along with insights into its web interface and preliminary performance tests.
△ Less
Submitted 25 July, 2024; v1 submitted 24 July, 2024;
originally announced July 2024.
-
Characterisation and assessment of the SOXS Spectrograph UV-VIS Detector System
Authors:
R. Cosentino,
M. Hernandez,
H. Ventura,
S. Campana,
R. Claudi,
P. Schipani,
M. Aliverti,
L. Asquini,
A. Baruffolo,
F. Battaini,
Sagi Ben-Ami,
A. Bichkovsky,
G. Capasso,
F. D'Alessio,
P. D'Avanzo,
O. Hershko,
H. Kuncarayakti,
M. Landoni,
M. Munari,
G. Pignata,
A. Rubin,
S. Scuderi,
F. Vitali,
D. Young,
J. Achren
, et al. (28 additional authors not shown)
Abstract:
The SOXS spectrograph, designed for the ESO NTT telescope, operates in both the optical (UV-VIS: 350-850 nm) and NIR (800-2000 nm) bands. This article provides an overview of the final tests conducted on the UV-VIS camera system using a telescope simulator. It details the system's performance evaluation, including key metrics such as gain, readout noise, and linearity, and highlights the advanceme…
▽ More
The SOXS spectrograph, designed for the ESO NTT telescope, operates in both the optical (UV-VIS: 350-850 nm) and NIR (800-2000 nm) bands. This article provides an overview of the final tests conducted on the UV-VIS camera system using a telescope simulator. It details the system's performance evaluation, including key metrics such as gain, readout noise, and linearity, and highlights the advancements made in the upgraded acquisition system. The testing process, conducted in the Padua laboratory, involved comprehensive simulations of the telescope environment to ensure the results closely resemble those expected at the ESO-NTT telescope. The successful completion of these tests confirms the system's readiness for deployment to Chile, where it will be installed on the NTT telescope, marking a significant milestone in the SOXS project.
△ Less
Submitted 24 July, 2024;
originally announced July 2024.
-
The SOXS Instrument Control Software approaching the PAE
Authors:
Davide Ricci,
Bernardo Salasnich,
Andrea Baruffolo,
Jani Achrén,
Matteo Aliverti,
José A. Araiza-Durán,
Iair Arcavi,
Laura Asquini,
Federico Battaini,
Sagi Ben-Ami,
Alex Bichkovsky,
Anna Brucalassi,
Rachel Bruch,
Lorenzo Cabona,
Sergio Campana,
Giulio Capasso,
Enrico Cappellaro,
Riccardo Claudi,
Mirko Colapietro,
Rosario Cosentino,
Francesco D'Alessio,
Paolo D'Avanzo,
Sergio D'Orsi,
Massimo Della Valle,
Rosario Di Benedetto
, et al. (28 additional authors not shown)
Abstract:
The Instrument Control Software of SOXS (Son Of X-Shooter), the forthcoming spectrograph for the ESO New Technology Telescope at the La Silla Observatory, has reached a mature state of development and is approaching the crucial Preliminary Acceptance in Europe phase. Now that all the subsystems have been integrated in the laboratories of the Padova Astronomical Observatory, the team operates for t…
▽ More
The Instrument Control Software of SOXS (Son Of X-Shooter), the forthcoming spectrograph for the ESO New Technology Telescope at the La Silla Observatory, has reached a mature state of development and is approaching the crucial Preliminary Acceptance in Europe phase. Now that all the subsystems have been integrated in the laboratories of the Padova Astronomical Observatory, the team operates for testing purposes with the whole instrument at both engineering and scientific level. These activities will make use of a set of software peculiarities that will be discussed in this contribution. In particular, we focus on the synoptic panel, the co-rotator system special device, on the Active Flexure Compensation system which controls two separate piezo tip-tilt devices.
△ Less
Submitted 24 July, 2024;
originally announced July 2024.
-
Walking with SOXS towards the transient sky
Authors:
P. Schipani,
S. Campana,
R. Claudi,
M. Aliverti,
A. Baruffolo,
S. Ben-Ami,
G. Capasso,
M. Colapietro,
R. Cosentino,
F. D'Alessio,
P. D'Avanzo,
M. Genoni,
O. Hershko,
H. Kuncarayakti,
M. Landoni,
M. Munari,
G. Pignata,
K. Radhakrishnan,
D. Ricci,
A. Rubin,
S. Scuderi,
F. Vitali,
D. Young,
M. Accardo,
J. Achrén
, et al. (37 additional authors not shown)
Abstract:
SOXS (Son Of X-Shooter) is the new ESO instrument that is going to be installed on the 3.58-m New Technology Telescope at the La Silla Observatory. SOXS is a single object spectrograph offering a wide simultaneous spectral coverage from U- to H-band. Although such an instrument may have potentially a large variety of applications, the consortium designed it with a clear science case: it is going t…
▽ More
SOXS (Son Of X-Shooter) is the new ESO instrument that is going to be installed on the 3.58-m New Technology Telescope at the La Silla Observatory. SOXS is a single object spectrograph offering a wide simultaneous spectral coverage from U- to H-band. Although such an instrument may have potentially a large variety of applications, the consortium designed it with a clear science case: it is going to provide the spectroscopic counterparts to the ongoing and upcoming imaging surveys, becoming one of the main follow-up instruments in the Southern hemisphere for the classification and characterization of transients. The NTT+SOXS system is specialized to observe all transients and variable sources discovered by imaging surveys with a flexible schedule maintained by the consortium, based on a remote scheduler which will interface with the observatory software infrastructure. SOXS is realized timely to be highly synergic with transients discovery machines like the Vera C. Rubin Observatory. The instrument has been integrated and tested in Italy, collecting and assembling subsystems coming from all partners spread over six countries in three continents. The first preparatory activities in Chile have been completed at the telescope. This article gives an updated status of the project before the shipping of the instrument to Chile.
△ Less
Submitted 24 July, 2024;
originally announced July 2024.
-
The CUbesat Solar Polarimeter (CUSP) mission overview
Authors:
Sergio Fabiani,
Ettore Del Monte,
Ilaria Baffo,
Sergio Bonomo,
Daniele Brienza,
Riccardo Campana,
Mauro Centrone,
Gessica Contini,
Enrico Costa,
Giovanni Cucinella,
Andrea Curatolo,
Nicolas De Angelis,
Giovanni De Cesare,
Andrea Del Re,
Sergio Di Cosimo,
Simone Di Filippo,
Alessandro Di Marco,
Giuseppe Di Persio,
Immacolata Donnarumma,
Pierluigi Fanelli,
Paolo Leonetti,
Alfredo Locarini,
Pasqualino Loffredo,
Giovanni Lombardi,
Gabriele Minervini
, et al. (13 additional authors not shown)
Abstract:
The CUbesat Solar Polarimeter (CUSP) project is a future CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band, by means of a Compton scattering polarimeter. CUSP will allow us to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. The project is in the framework of the Italian Space…
▽ More
The CUbesat Solar Polarimeter (CUSP) project is a future CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band, by means of a Compton scattering polarimeter. CUSP will allow us to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. The project is in the framework of the Italian Space Agency Alcor Program, which aims to develop new CubeSat missions. CUSP is approved for a Phase B study that will last for 12 months, starting in mid-2024. We report on the current status of the CUSP mission project as the outcome of the Phase A.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Characterization of avalanche photodiodes (APDs) for the CUbesat Solar Polarimeter (CUSP) mission
Authors:
F. Cologgi,
A. Alimenti,
S. Fabiani,
K. Torokthii,
E. Silva,
E. Del Monte,
I. Baffo,
S. Bonomo,
D. Brienza,
R. Campana,
M. Centrone,
G. Contini,
E. Costa,
A. Curatolo,
G. Cucinella,
N. DevAngelis,
G. De Cesare,
A. Del Re,
S. Di Cosimo,
S. Di Filippo,
A. Di Marco,
G. Di Persio,
I. Donnarumma,
P. Fanelli,
P. Leonetti
, et al. (17 additional authors not shown)
Abstract:
The CUbesat Solar Polarimeter (CUSP) project is a CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow the study of the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. CUSP is a project in the framework of the Alcor Program of t…
▽ More
The CUbesat Solar Polarimeter (CUSP) project is a CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow the study of the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. CUSP is a project in the framework of the Alcor Program of the Italian Space Agency aimed at developing new CubeSat missions. It is approved for a Phase B study. In this work, we report on the characterization of the Avalanche Photodiodes (APDs) that will be used as readout sensors of the absorption stage of the Compton polarimeter. We assessed the APDs gain and energy resolution as a function of temperature by irradiating the sensor with a \textsuperscript{55}Fe radioactive source. Moreover, the APDs were also characterized as being coupled to a GAGG scintillator.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
The multi$-$physics analysis and design of CUSP, a two CubeSat constellation for Space Weather and Solar flares X-ray polarimetry
Authors:
Giovanni Lombardi,
Sergio Fabiani,
Ettore Del Monte,
Enrico Costa,
Paolo Soffitta,
Fabio Muleri,
Ilaria Baffo,
Marco E. Biancolini,
Sergio Bonomo,
Daniele Brienza,
Riccardo Campana,
Mauro Centrone,
Gessica Contini,
Giovanni Cucinella,
Andrea Curatolo,
Nicolas De Angelis,
Giovanni De Cesare,
Andrea Del Re,
Sergio Di Cosimo,
Simone Di Filippo,
Alessandro Di Marco,
Emanuele Di Meo,
Giuseppe Di Persio,
Immacolata Donnarumma,
Pierluigi Fanelli
, et al. (16 additional authors not shown)
Abstract:
The CUbesat Solar Polarimeter (CUSP) project aims to develop a constellation of two CubeSats orbiting the Earth to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter on board of each satellite. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures. CUSP is a project approved f…
▽ More
The CUbesat Solar Polarimeter (CUSP) project aims to develop a constellation of two CubeSats orbiting the Earth to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter on board of each satellite. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures. CUSP is a project approved for a Phase B study by the Italian Space Agency in the framework of the Alcor program aimed to develop CubeSat technologies and missions. In this paper we describe the a method for a multi-physical simulation analysis while analyzing some possible design optimization of the payload design solutions adopted. In particular, we report the mechanical design for each structural component, the results of static and dynamic finite element analysis, the preliminary thermo-mechanical analysis for two specific thermal cases (hot and cold orbit) and a topological optimization of the interface between the platform and the payload.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
The evaluation of the CUSP scientific performance by a GEANT4 Monte Carlo simulation
Authors:
Giovanni De Cesare,
Sergio Fabiani,
Riccardo Campana,
Giovanni Lombardi,
Ettore Del Monte,
Enrico Costa,
Ilaria Baffo,
Sergio Bonomo,
Daniele Brienza,
Mauro Centrone,
Gessica Contini,
Giovanni Cucinella,
Andrea Curatolo,
Nicolas De Angelis,
Andrea Del Re,
Sergio Di Cosimo,
Simone Di Filippo,
Alessandro Di Marco,
Giuseppe Di Persio,
Immacolata Donnarumma,
Pierluigi Fanelli,
Paolo Leonetti,
Alfredo Locarini,
Pasqualino Loffredo,
Gabriele Minervini
, et al. (13 additional authors not shown)
Abstract:
The CUbesat Solar Polarimeter (CUSP) project is a CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. CUSP is a project in the framework of the Alcor Program of the I…
▽ More
The CUbesat Solar Polarimeter (CUSP) project is a CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. CUSP is a project in the framework of the Alcor Program of the Italian Space Agency aimed to develop new CubeSat missions. It is approved for a Phase B study. In this work, we report on the accurate simulation of the detector's response to evaluate the scientific performance. A GEANT4 Monte Carlo simulation is used to assess the physical interactions of the source photons with the detector and the passive materials. Using this approach, we implemented a detailed CUSP Mass Model. In this work, we report on the evaluation of the detector's effective area as a function of the beam energy.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
An Ingot-like class of WaveFront Sensors for Laser Guide Stars
Authors:
Roberto Ragazzoni,
Elisa Portaluri,
Davide Greggio,
Marco Dima,
Carmelo Arcidiacono,
Maria Bergomi,
Simone Di Filippo,
Tania Sofia Gomes Machado,
Kalyan Kumar Radhakrishnan Santhakumari,
Valentina Viotto,
Federico Battaini,
Elena Carolo,
Simonetta Chinellato,
Jacopo Farinato,
Demetrio Magrin,
Luca Marafatto,
Gabriele Umbriaco,
Daniele Vassallo
Abstract:
Full sky coverage Adaptive Optics on Extremely Large Telescopes requires the adoption of several Laser Guide Stars as references.With such large apertures, the apparent elongation of the beacons is absolutely significant.With few exceptions,WaveFront Sensors designed for Natural Guide Stars are adapted and used in suboptimal mode in this context. We analyse and describe the geometrical properties…
▽ More
Full sky coverage Adaptive Optics on Extremely Large Telescopes requires the adoption of several Laser Guide Stars as references.With such large apertures, the apparent elongation of the beacons is absolutely significant.With few exceptions,WaveFront Sensors designed for Natural Guide Stars are adapted and used in suboptimal mode in this context. We analyse and describe the geometrical properties of a class of WaveFront Sensors that are specifically designed to deal with Laser Guide Stars propagated from a location in the immediate vicinity of the telescope aperture. We describe in three dimensions the loci where the light of the Laser Guide Stars would focus in the focal volume located behind the focal plane (where astronomical objects are reimaged). We also describe the properties of several types of optomechanical devices that, through refraction and reflections, act as perturbers for this new class of pupil plane sensors, which we call ingot WaveFront Sensor. We give the recipes both for the most reasonable complex version of these WaveFront Sensors, with 6 pupils, and for the simplest one, with only 3 pupils. Both of them are referred to the ELT case. Elements to have a qualitative idea of how the sensitivity of such a new class of sensors compared to conventional ones are outlined. We present a new class of WaveFront Sensors, by carrying out the extension to the case of elongated sources at finite distance of the pyramid WaveFront Sensor and pointing out which advantages of the pyramid are retained and how it can be adopted to optimize the sensing.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
MORFEO enters final design phase
Authors:
Lorenzo Busoni,
Guido Agapito,
Alessandro Ballone,
Alfio Puglisi,
Alexander Goncharov,
Amedeo Petrella,
Amico Di Cianno,
Andrea Balestra,
Andrea Baruffolo,
Andrea Bianco,
Andrea Di Dato,
Angelo Valentini,
Benedetta Di Francesco,
Benoit Sassolas,
Bernardo Salasnich,
Carmelo Arcidiacono,
Cedric Plantet,
Christian Eredia,
Daniela Fantinel,
Danilo Selvestrel,
Deborah Malone,
Demetrio Magrin,
Domenico D'Auria,
Edoardo Redaelli,
Elena Carolo
, et al. (59 additional authors not shown)
Abstract:
MORFEO (Multi-conjugate adaptive Optics Relay For ELT Observations, formerly MAORY), the MCAO system for the ELT, will provide diffraction-limited optical quality to the large field camera MICADO. MORFEO has officially passed the Preliminary Design Review and it is entering the final design phase. We present the current status of the project, with a focus on the adaptive optics system aspects and…
▽ More
MORFEO (Multi-conjugate adaptive Optics Relay For ELT Observations, formerly MAORY), the MCAO system for the ELT, will provide diffraction-limited optical quality to the large field camera MICADO. MORFEO has officially passed the Preliminary Design Review and it is entering the final design phase. We present the current status of the project, with a focus on the adaptive optics system aspects and expected milestones during the next project phase.
△ Less
Submitted 13 October, 2023;
originally announced October 2023.
-
The Ingot WFS ON an ELT-like telescope: the project and simulations
Authors:
Elisa Portaluri,
Simone Di Filippo,
Valentina Viotto,
Roberto Ragazzoni,
Carmelo Arcidiacono,
Davide Greggio,
Kalyan Radhakrishnan,
Maria Bergomi,
Luca Marafatto,
Marco Dima,
Jacopo Farinato,
Demetrio Magrin,
Gianluca Di Rico,
Mauro Centrone,
Domenico Bonaccini
Abstract:
The Ingot WFS represents an innovative and indispensable class of sensors conceived to overcome some limitations due to the LGSs geometry, which is significantly different from the point-object originated by a NGS. Here we overview the project, aiming at investigating the performance of an ELT-like telescope equipped with the Ingot WFS, facing different aspects of the program: the needs for numeri…
▽ More
The Ingot WFS represents an innovative and indispensable class of sensors conceived to overcome some limitations due to the LGSs geometry, which is significantly different from the point-object originated by a NGS. Here we overview the project, aiming at investigating the performance of an ELT-like telescope equipped with the Ingot WFS, facing different aspects of the program: the needs for numerical simulations and laboratory experiments, the prototype and, finally the future plan for the verification on sky.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Laboratory testing of the Ingot WFS
Authors:
Simone Di Filippo,
Davide Greggio,
Maria Bergomi,
Kalyan Kumar Radhakrishnan Santhakumari,
Elisa Portaluri,
Carmelo Arcidiacono,
Valentina Viotto,
Roberto Ragazzoni,
Marco Dima,
Luca Marafatto,
Jacopo Farinato,
Demetrio Magrin
Abstract:
The ingot WFS is a new kind of wavefront sensor specifically designed to deal with the elongation of LGS reference sources on ELT-class telescopes. Like the pyramid, it belongs to the family of pupil plane wavefront sensors and can be considered as a generalization of the pyramid WFS for extended, three-dimensional elongated sources. The current design uses a simple, reflective roof-shaped prism t…
▽ More
The ingot WFS is a new kind of wavefront sensor specifically designed to deal with the elongation of LGS reference sources on ELT-class telescopes. Like the pyramid, it belongs to the family of pupil plane wavefront sensors and can be considered as a generalization of the pyramid WFS for extended, three-dimensional elongated sources. The current design uses a simple, reflective roof-shaped prism to split the light into three pupils that are used to retrieve the wavefront shape. A test-bench has been realized at the INAF-Padova laboratories to test the alignment and functioning of the ingot. The bench is equipped with a deformable lens, conjugated to the pupil plane, able to apply low-order aberrations and with a hexapod for the precise alignment of the ingot prism. In this work we present a robust and fully automated Python-code alignment procedure, which is able, by using the optical feedback from the I-WFS, to adjust its 6-degrees of freedom. Moreover, we report on the tests conducted with the deformable lens to characterize the ingot WFS response to low-order aberrations in terms of sensitivity and linearity. The results are used as a comparison for simulations to validate the ray-tracing modeling approach with the future goal of optimizing the procedure adopted for signal calculation and phase retrieval.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
CUSP: a two cubesats constellation for Space Weather and solar flares X-ray polarimetry
Authors:
Sergio Fabiani,
Ilaria Baffo,
Sergio Bonomo,
Gessica Contini,
Enrico Costa,
Giovanni Cucinella,
Giovanni De Cesare,
Ettore Del Monte,
Andrea Del Re,
Sergio Di Cosimo,
Simone Di Filippo,
Alessandro Di Marco,
Pierluigi Fanelli,
Fabio La Monaca,
Alfredo Locarini,
Pasqualino Loffredo,
Giovanni Lombardi,
Gabriele Minervini,
Dario Modenini,
Fabio Muleri,
Andrea Negri,
Massimo Perelli,
John Rankin,
Alda Rubini,
Paolo Soffitta
, et al. (3 additional authors not shown)
Abstract:
The CUbesat Solar Polarimeter (CUSP) project aims to develop a constellation of two CubeSats orbiting the Earth to measure the linear polarisation of solar flares in the hard X-ray band by means of a Compton scattering polarimeter on board of each satellite. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures. CUSP is a project approved f…
▽ More
The CUbesat Solar Polarimeter (CUSP) project aims to develop a constellation of two CubeSats orbiting the Earth to measure the linear polarisation of solar flares in the hard X-ray band by means of a Compton scattering polarimeter on board of each satellite. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures. CUSP is a project approved for a Phase A study by the Italian Space Agency in the framework of the Alcor program aimed to develop CubeSat technologies and missions.
△ Less
Submitted 12 August, 2022;
originally announced August 2022.
-
High precision measurement of the $^6$He half-life
Authors:
M. Kanafani,
X. Fléchard,
O. Naviliat-Cuncic,
G. D. Chung,
S. Leblond,
E. Liénard,
X. Mougeot,
G. Quéméner,
A. Simancas Di Filippo,
J-C. Thomas
Abstract:
The half-life of $^{6}$He has been measured using a low energy radioactive beam implanted in a YAP scintillator and recording decay events in a 4$π$ geometry. Events were time-stamped with a digital data acquisition system enabling a reliable control of dead-time effects and detector gain variations. The result, $T_{1/2} = (807.25 \pm 0.16_{\rm stat} \pm 0.11_{\rm sys}$)~ms, provides the most prec…
▽ More
The half-life of $^{6}$He has been measured using a low energy radioactive beam implanted in a YAP scintillator and recording decay events in a 4$π$ geometry. Events were time-stamped with a digital data acquisition system enabling a reliable control of dead-time effects and detector gain variations. The result, $T_{1/2} = (807.25 \pm 0.16_{\rm stat} \pm 0.11_{\rm sys}$)~ms, provides the most precise value obtained so far and is consistent with the only previous measurement having a precision smaller than 0.1%. This resolves the longstanding discrepancy previously observed between two sets of measurements.
△ Less
Submitted 2 September, 2022; v1 submitted 13 July, 2022;
originally announced July 2022.
-
Optical design trade-off study for the AO module of MAVIS
Authors:
Davide Greggio,
Simone Di Filippo,
Demetrio Magrin,
Christian Schwab,
Valentina Viotto,
Lorenzo Busoni,
Simone Esposito,
Roberto Ragazzoni,
Thierry Fusco,
Neichel Benoit,
Enrico Pinna,
Francois Rigaut,
Carmelo Arcidiacono,
Maria Bergomi,
Federico Biondi,
Simonetta Chinellato,
Jacopo Farinato,
Luca Marafatto,
Elisa Portaluri,
Kalyan Radhakrishnan,
Daniele Vassallo
Abstract:
MAVIS (MCAO-Assisted Visible Imager and Spectrograph) is an instrument proposed for the VLT Adaptive Optics Facility (AOF), which is currently in the phase-A conceptual design study. It will be the first instrument performing Multi-conjugate adaptive optics at visible wavelengths, enabling a new set of science observations. MAVIS will be installed at the Nasmyth platform of VLT UT-4 taking advanta…
▽ More
MAVIS (MCAO-Assisted Visible Imager and Spectrograph) is an instrument proposed for the VLT Adaptive Optics Facility (AOF), which is currently in the phase-A conceptual design study. It will be the first instrument performing Multi-conjugate adaptive optics at visible wavelengths, enabling a new set of science observations. MAVIS will be installed at the Nasmyth platform of VLT UT-4 taking advantage of the already operational Adaptive Optics Facility that consists of 4 LGS and an adaptive secondary mirror with 1170 actuators. In addition, two post-focal deformable mirrors and 3 Natural Guide Stars (NGS) are foreseen for the tomographic reconstruction and correction of atmospheric turbulence. The MAVIS AO module is intended to feed both an imager and a spectrograph that will take advantage of the increased resolution and depth with respect to current instrumentation. In this paper we present the trade-off study for the optical design of the MAVIS AO module, highlighting the peculiarities of the system and the requirements imposed by AO. We propose a set of possible optical solutions able to provide a compact and efficient implementation of the different subsystems and we compare them in terms of delivered optical quality, overall throughput, encumbrance, ease of alignment and residual distortion.
△ Less
Submitted 27 January, 2021;
originally announced January 2021.
-
INGOT Wavefront Sensor: from the optical design to a preliminary laboratory test
Authors:
Simone Di Filippo,
Davide Greggio,
Maria Bergomi,
Kalyan Radhakrishnan,
Elisa Portaluri,
Valentina Viotto,
Carmelo Arcidiacono,
Demetrio Magrin,
Luca Marafatto,
Marco Dima,
Roberto Ragazzoni,
Pierre Janin-Potiron,
Lauren Schatz,
Benoit Neichel,
Olivier Fauvarque,
Thierry Fusco
Abstract:
The Ingot wavefront sensor is a novel pupil-plane wavefront sensor, specifically designed to cope with the elongation typical of the extended nature of the Laser Guide Star (LGS). In the framework of the ELT, we propose an optical solution suitable for a Laser launch telescope, located outside the telescope pupil. In this paper, we present the current optical design, based on a reflective roof-sha…
▽ More
The Ingot wavefront sensor is a novel pupil-plane wavefront sensor, specifically designed to cope with the elongation typical of the extended nature of the Laser Guide Star (LGS). In the framework of the ELT, we propose an optical solution suitable for a Laser launch telescope, located outside the telescope pupil. In this paper, we present the current optical design, based on a reflective roof-shaped prism, which, at the level of the focal plane, splits the light from an LGS producing three beams. The three images of the telescope pupils can be then used for the retrieval of the first derivative of the wavefront. The 3D nature of such a device requires new alignment techniques to be determined theoretically and verified in the real world. A possible fully automated procedure, relying solely on the illumination observed at the three pupils, to align the prism to the image of the LGS is discussed. Careful attention needs to be put both on the telecentricity of the system and on the reference systems of the Ingot adjustments in the 3D space. This is crucial in order to disentangle all the possible misalignment effects. In this context, we devised a test-bench able to reproduce, in a scaled manner, the 3D illumination that the Ingot will face at the ELT, in order to validate the design and to perform preliminary tests of phase retrieval.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
INGOT WFS for LGSs: First Results from Simulations
Authors:
Elisa Portaluri,
Valentina Viotto,
Roberto Ragazzoni,
Carmelo Arcidiacono,
Maria Bergomi,
Davide Greggio,
Kalyan Radhakrishnan,
Simone di Filippo,
Luca Marafatto,
Marco Dima,
Federico Biondi,
Jacopo Farinato,
Demetrio Magrin
Abstract:
The Ingot WFS, a Pyramid-like WFS, has been proposed as a relief to the LGS spot elongation. Actually, the artificial sources are confined in an excited cigar-shaped region in the sodium layer and portions of the telescope aperture have a corresponding different perspective. This diversity generates a variation of the WFS response depending on the illuminated sub-aperture position. The feasibility…
▽ More
The Ingot WFS, a Pyramid-like WFS, has been proposed as a relief to the LGS spot elongation. Actually, the artificial sources are confined in an excited cigar-shaped region in the sodium layer and portions of the telescope aperture have a corresponding different perspective. This diversity generates a variation of the WFS response depending on the illuminated sub-aperture position. The feasibility study of the INGOT WFS is developing within the MAORY project. In this work we present the numerical simulator built in order to investigate the performance of the IngotWFS in terms of Strehl Ratio, obtained reconstructing the incoming turbulent wavefront with a modal approach, in a closed-loop fashion. We also discuss the assumptions and tests we made in order to explore the range of parameters that play key roles in the game. Finally, we report on the overall results of the simulations of the performance expected by the Ingot WFS, under different conditions and input aberrations, with the aim to also compare the measured AO loop residuals with the Shack-Hartmann WFS ones, obtained working under the same assumptions.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Pupil plane wavefront sensing for extended and 3D sources
Authors:
Roberto Ragazzoni,
Valentina Viotto,
Elisa Portaluri,
Maria Bergomi,
Davide Greggio,
Simone Di Filippo,
Kalyan Radhakrishnan,
Gabriele Umbriaco,
Marco Dima,
Demetrio Magrin,
Jacopo Farinato,
Luca Marafatto,
Carmelo Arcidiacono,
Federico Biondi
Abstract:
The basic outline of a pupil plane WaveFront Sensor is reviewed taking into account that the source to be sensed could be different from an unresolved source, i.e. it is extended, and that it could deploy also in a 3D fashion, enough to exceed the field's depth of the observing telescope. Under these conditions it is pointed out that the features of the reference are not invariant for different po…
▽ More
The basic outline of a pupil plane WaveFront Sensor is reviewed taking into account that the source to be sensed could be different from an unresolved source, i.e. it is extended, and that it could deploy also in a 3D fashion, enough to exceed the field's depth of the observing telescope. Under these conditions it is pointed out that the features of the reference are not invariant for different position on the pupil and it is shown that the INGOT WFS is the equivalent of the Pyramid for a Laser Guide Star. Under these conditions one can imagine to use a Dark WFS approach to improve the SNR of such a WFS, or to use a corrected upward beam in order to achieve a better use of the LGS photons with respect to an ideal Shack-Hartmann WFS.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
INGOT Wavefront Sensor: Simulation of Pupil Images
Authors:
Valentina Viotto,
Elisa Portaluri,
Carmelo Arcidiacono,
Maria Bergomi,
Simone Di Filippo,
Davide Greggio,
Kalyan Radhakrishnan,
Marco Dima,
Jacopo Farinato,
Demetrio Magrin,
Luca Marafatto,
Roberto Ragazzoni
Abstract:
The ingot wavefront sensor (I-WFS) has been proposed, for ELT-like apertures, as a possible pupil plane WFS, to cope with the geometrical characteristics of a laser guide star (LGS). Within the study and development of such a WFS, on-going in the framework of the MAORY project, the final purpose of the I-WFS simulation is to estimate its performance in terms of wavefront aberration measurement cap…
▽ More
The ingot wavefront sensor (I-WFS) has been proposed, for ELT-like apertures, as a possible pupil plane WFS, to cope with the geometrical characteristics of a laser guide star (LGS). Within the study and development of such a WFS, on-going in the framework of the MAORY project, the final purpose of the I-WFS simulation is to estimate its performance in terms of wavefront aberration measurement capability. The first step of this analysis is to translate incoming wavefronts into the three pupil images, produced by the optical system. The intrinsic geometrical characteristics of the ingot optical element, designed to be coupled with the LGS elongated image, make the system conceptually different with respect to other pupil WFSs (like the Pyramid WFS, P-WFS) also in terms of the simulation technique to be selected, within the ones which can be found in literature. In this paper, we aim to report the considerations and derivations which led to the selection of a ray-tracing method for ingot pupil images simulation, and the geometrical assumptions and approach made to optimize the computing time.
△ Less
Submitted 11 December, 2020;
originally announced December 2020.