Jamming in sheared foams and emulsions, explained by critical instability of the films between neighboring bubbles and drops
Authors:
N. D. Denkov,
S. Tcholakova,
K. Golemanov,
A. Lips
Abstract:
Phenomenon of foam and emulsion jamming at low shear rates is explained by considering the dynamics of thinning in the transient film, formed between the neighboring bubbles and drops. After gradually thinning down to a critical thickness, these films undergo instability transition and thin stepwise, forming the so-called "black films", which are only several nanometers thick and, thereby, lead…
▽ More
Phenomenon of foam and emulsion jamming at low shear rates is explained by considering the dynamics of thinning in the transient film, formed between the neighboring bubbles and drops. After gradually thinning down to a critical thickness, these films undergo instability transition and thin stepwise, forming the so-called "black films", which are only several nanometers thick and, thereby, lead to stronger adhesion between the dispersed particles. Theoretical analysis shows that such film thickness instability occurs only if the contact time between the bubbles/drops in sheared foam/emulsion is sufficiently long, which corresponds to sufficiently low (critical) rate of shear. Explicit expression for this critical rate is proposed and compared to experimental data.
△ Less
Submitted 23 January, 2009;
originally announced January 2009.
Theoretical model of viscous friction inside steadily sheared foams and concentrated emulsions
Authors:
S. Tcholakova,
N. D. Denkov,
K. Golemanov,
K. P. Ananthapadmanabhan,
A. Lips
Abstract:
In a recent letter (Denkov et al., Phys. Rev. Lett., vol. 100 (2008) p. 138301) we calculated theoretically the macroscopic viscous stress of steadily sheared foam/emulsion from the energy dissipated inside the transient planar films, formed between neighboring bubbles/drops in the shear flow. The model predicts that the viscous stress in these systems should be a proportional to Ca^1/2, where C…
▽ More
In a recent letter (Denkov et al., Phys. Rev. Lett., vol. 100 (2008) p. 138301) we calculated theoretically the macroscopic viscous stress of steadily sheared foam/emulsion from the energy dissipated inside the transient planar films, formed between neighboring bubbles/drops in the shear flow. The model predicts that the viscous stress in these systems should be a proportional to Ca^1/2, where Ca is the capillary number and n = 1/2 is the power-law index. In the current paper we explain in detail our model and develop it further in several aspects: First, we extend the model to account for the effects of viscous friction in the curved meniscus regions, surrounding the planar films, on the dynamics of film formation and on the total viscous stress. Second, we consider the effects of surface forces (electrostatic, van der Waals, etc.) acting between the surfaces of the neighboring bubbles/drops and show that these forces could be important in emulsions, due to the relatively small thickness of emulsion films (often comparable to the range of action of the surface forces). Third, additional consideration is made for bubbles/drops exhibiting high surface viscosity, for which we demonstrate an additional contribution to the macroscopic viscous stress, created by the surface dissipation of energy. The new upgraded model predicts that the energy dissipation at the bubble/drop surface leads to power-law index n < 1/2, whereas the contribution of the surface forces leads to n > 1/2, which explains the rich variety of foam/emulsion behaviors observed upon steady shear. Various comparisons are made between model predictions and experimental results for both foams and emulsions, and a very good agreement is found.
△ Less
Submitted 28 May, 2008;
originally announced May 2008.
