-
Hyperspectral electromechanical imaging at the nanoscale: Dynamical backaction, dissipation and quantum fluctuations
Authors:
Clément Chardin,
Sébastien Pairis,
Sabine Douillet,
Moïra Hocevar,
Julien Claudon,
Jean-Philippe Poizat,
Ludovic Bellon,
Pierre Verlot
Abstract:
We report a new scanning nanomechanical noise microscopy platform enabling to both heat and acquire the fluctuations of mechanical nanostructures with nanometric resolution. We use this platform to image the thermally activated nanomechanical dynamics of a model system consisting of a $40\,\mathrm{nm}$ diameter single-defect nanowire, while scanning a localized heat source across its surface. We d…
▽ More
We report a new scanning nanomechanical noise microscopy platform enabling to both heat and acquire the fluctuations of mechanical nanostructures with nanometric resolution. We use this platform to image the thermally activated nanomechanical dynamics of a model system consisting of a $40\,\mathrm{nm}$ diameter single-defect nanowire, while scanning a localized heat source across its surface. We develop a thermal backaction model, which we use to demonstrate a close connection between the structure of the nanowire, its thermal response, its dissipation and its fluctuations. We notably show that the defect behaves as a single fluctuation hub, whose e-beam excitation yields a far off-equilibrium vibrational state, largely dominated by the quantum fluctuations of the heating source. Our platform is of interest for future quantitative investigation of fundamental nanoscale dynamical phenomena, and appears as a new playground for investigating quantum thermodynamics in the strongly dissipative regime and at room temperature.
△ Less
Submitted 30 July, 2024;
originally announced July 2024.
-
Towards near-unity $β$ factor and collection efficiency in single-photon sources: employing dielectric rings to suppress the emission into radiation modes
Authors:
Martin Arentoft Jacobsen,
Luca Vannucci,
Julien Claudon,
Jean-Michel Gérard,
Niels Gregersen
Abstract:
In this paper, we demonstrate that a few-period circular Bragg reflector around an infinite nanowire can increase the $β$ factor of the fundamental mode up to 0.999 due to further suppression of the emission into radiation modes caused by a photonic band gap effect. We then apply this strategy in the practically relevant case of the finite-sized SPS based on tapered nanowires and demonstrate that…
▽ More
In this paper, we demonstrate that a few-period circular Bragg reflector around an infinite nanowire can increase the $β$ factor of the fundamental mode up to 0.999 due to further suppression of the emission into radiation modes caused by a photonic band gap effect. We then apply this strategy in the practically relevant case of the finite-sized SPS based on tapered nanowires and demonstrate that the collection efficiency can be further increased. Additionally, we also show the beneficial effects of adding optimized high-index rings around the micropillar SPS.
△ Less
Submitted 7 July, 2023;
originally announced July 2023.
-
Performance of the nanopost single-photon source: beyond the single-mode model
Authors:
Martin Arentoft Jacobsen,
Yujing Wang,
Luca Vannucci,
Julien Claudon,
Jean-Michel Gérard,
Niels Gregersen
Abstract:
We present a detailed analysis of the physics governing the collection efficiency and the Purcell enhancement of the nanopost single-photon source. We show that a standard single-mode Fabry-Pérot model is insufficient to describe the device performance, which benefits significantly from scattering from the fundamental mode to radiation modes. We show how the scattering mechanism decouples the coll…
▽ More
We present a detailed analysis of the physics governing the collection efficiency and the Purcell enhancement of the nanopost single-photon source. We show that a standard single-mode Fabry-Pérot model is insufficient to describe the device performance, which benefits significantly from scattering from the fundamental mode to radiation modes. We show how the scattering mechanism decouples the collection efficiency from the Purcell enhancement, such that maximum collection efficiency is obtained off-resonance. Finally, we discuss how this scattering mechanism can be beneficial for future single-photon source designs.
△ Less
Submitted 5 January, 2023;
originally announced January 2023.
-
Near-unity efficiency and photon indistinguishability for the "hourglass" single-photon source using suppression of background emission
Authors:
Benedek Gaál,
Martin Arentoft Jacobsen,
Luca Vannucci,
Julien Claudon,
Jean-Michel Gérard,
Niels Gregersen
Abstract:
An on-going challenge within scalable optical quantum information processing is to increase the collection efficiency $\varepsilon$ and the photon indistinguishability $η$ of the single-photon source towards unity. Within quantum dot-based sources, the prospect of increasing the product $\varepsilon η$ arbitrarily close to unity was recently questioned. In this work, we discuss the influence of th…
▽ More
An on-going challenge within scalable optical quantum information processing is to increase the collection efficiency $\varepsilon$ and the photon indistinguishability $η$ of the single-photon source towards unity. Within quantum dot-based sources, the prospect of increasing the product $\varepsilon η$ arbitrarily close to unity was recently questioned. In this work, we discuss the influence of the trade-off between efficiency and indistinguishability in the presence of phonon-induced decoherence, and we show that the photonic "hourglass" design allows for improving $\varepsilon η$ beyond the predicted maximum for the standard micropillar design subject to this trade-off. This circumvention of the trade-off is possible thanks to control of the spontaneous emission into background radiation modes, and our work highlights the importance of engineering of the background emission in future pursuits of near-unity performance of quantum dot single-photon sources.
△ Less
Submitted 19 November, 2022; v1 submitted 5 July, 2022;
originally announced July 2022.
-
Inducing micromechanical motion by optical excitation of a single quantum dot
Authors:
Jan Kettler,
Nitika Vaish,
Laure Mercier de Lépinay,
Benjamin Besga,
Pierre-Louis de Assis,
Olivier Bourgeois,
Alexia Auffèves,
Maxime Richard,
Julien Claudon,
Jean-Michel Gérard,
Benjamin Pigeau,
Olivier Arcizet,
Pierre Verlot,
Jean-Philippe Poizat
Abstract:
Hybrid quantum optomechanical systems offer an interface between a single two-level system and a macroscopical mechanical degree of freedom. In this work, we build a hybrid system made of a vibrating microwire coupled to a single semiconductor quantum dot (QD) via material strain. It was shown a few years ago, that the QD excitonic transition energy can thus be modulated by the microwire motion. W…
▽ More
Hybrid quantum optomechanical systems offer an interface between a single two-level system and a macroscopical mechanical degree of freedom. In this work, we build a hybrid system made of a vibrating microwire coupled to a single semiconductor quantum dot (QD) via material strain. It was shown a few years ago, that the QD excitonic transition energy can thus be modulated by the microwire motion. We demonstrate here the reverse effect, whereby the wire is set in motion by the resonant drive of a single QD exciton with a laser modulated at the mechanical frequency. The resulting driving force is found to be almost 3 orders of magnitude larger than radiation pressure. From a fundamental aspect, this state dependent force offers a convenient strategy to map the QD quantum state onto a mechanical degree of freedom.
△ Less
Submitted 10 May, 2021;
originally announced May 2021.
-
Full characterization and modelling of graded interfaces in a high lattice-mismatch axial nanowire heterostructure
Authors:
D. V. Beznasyuk,
P. Stepanov,
J. L. Rouvière,
F. Glas,
M. Verheijen,
J. Claudon,
M. Hocevar
Abstract:
Controlling the strain level in nanowire heterostructures is critical for obtaining coherent interfaces of high crystalline quality and for the setting of functional properties such as photon emission, carrier mobility or piezoelectricity. In a nanowire axial heterostructure featuring a sharp interface, strain is set by the materials lattice mismatch and the nanowire radius. Here, we show that int…
▽ More
Controlling the strain level in nanowire heterostructures is critical for obtaining coherent interfaces of high crystalline quality and for the setting of functional properties such as photon emission, carrier mobility or piezoelectricity. In a nanowire axial heterostructure featuring a sharp interface, strain is set by the materials lattice mismatch and the nanowire radius. Here, we show that introducing a graded interface in nanowire heterostructures offers an additional parameter to control strain. For a given interface length and lattice mismatch, we first derive theoretically the maximum nanowire radius below which coherent growth is possible. We validate these findings by growing and characterizing various In(Ga)As/GaAs nanowire heterostructures with graded interfaces. Furthermore, we perform a complete chemical and structural characterization of the interface by combining energy-dispersive X-ray spectroscopy and high resolution transmission electron microscopy. In the case of coherent growth, we directly observe that the mismatch strain relaxes elastically on the side walls of the nanowire around the interface area, while the core of the nanowire remains partially strained. Moreover, our experimental data show good agreement with finite element calculations. This analysis confirms in particular that mechanical strain is largely reduced by interface grading. Overall, our work extends the parameter space for the design of nanowire heterostructures, thus opening new opportunities for nanowire optoelectronics.
△ Less
Submitted 3 December, 2019;
originally announced December 2019.
-
Generation of ultrashort (~10ps) spontaneous emission pulses by quantum dots in a switched optical microcavity
Authors:
Emanuel Peinke,
Tobias Sattler,
Guilherme Monteiro Torelly,
Joël Bleuse,
Julien Claudon,
Willem L. Vos,
Jean-Michel Gérard
Abstract:
We report on the generation of few-ps long spontaneous emission pulses by quantum dots (QDs) in a switched optical microcavity. We use a pulsed optical injection of free charge carriers to induce a large frequency shift of the fundamental mode of a GaAs/AlAs micropillar. We track in real time by time-resolved photoluminescence its fundamental mode during its relaxation, using the emission of the Q…
▽ More
We report on the generation of few-ps long spontaneous emission pulses by quantum dots (QDs) in a switched optical microcavity. We use a pulsed optical injection of free charge carriers to induce a large frequency shift of the fundamental mode of a GaAs/AlAs micropillar. We track in real time by time-resolved photoluminescence its fundamental mode during its relaxation, using the emission of the QD ensemble as a broadband internal light source. Sub-ensembles of QDs emitting at a given frequency, interact transiently with the mode and emit an ultrashort spontaneous emission pulse into it. By playing with switching parameters and with the emission frequency of the QDs, selected by spectral filtering, pulse durations ranging from 300 ps down to 6 ps have been obtained. These pulses display a very small coherence length, which opens potential applications in the field of ultrafast imaging. The control of QD-mode coupling on ps-time scales establishes also cavity switching as a key resource for quantum photonics.
△ Less
Submitted 23 October, 2019;
originally announced October 2019.
-
Shot noise limited nanomechanical detection and radiation pressure backaction from an electron beam
Authors:
Sébastien Pairis,
Fabrice Donatini,
Moira Hocevar,
Dmitri Tumanov,
Nitika Vaish,
Julien Claudon,
Jean-Philippe Poizat,
Pierre Verlot
Abstract:
Detecting nanomechanical motion has become an important challenge in Science and Technology. Recently, electromechanical coupling to focused electron beams has emerged as a promising method adapted to ultra-low scale systems. However the fundamental measurement processes associated with such complex interaction remain to be explored. Here we report highly sensitive detection of the Brownian motion…
▽ More
Detecting nanomechanical motion has become an important challenge in Science and Technology. Recently, electromechanical coupling to focused electron beams has emerged as a promising method adapted to ultra-low scale systems. However the fundamental measurement processes associated with such complex interaction remain to be explored. Here we report highly sensitive detection of the Brownian motion of um-long semiconducting nanowires (InAs). The measurement imprecision is found to be set by the shot noise of the secondary electrons generated along the electromechanical interaction. By carefully analysing the nano-electromechanical dynamics, we demonstrate the existence of a radial backaction process which we identify as originating from the momentum exchange between the electron beam and the nanomechanical device, which is also known as radiation pressure.
△ Less
Submitted 25 March, 2018;
originally announced March 2018.
-
Static strain tuning of quantum dots embedded in a photonic wire
Authors:
D. Tumanov,
N. Vaish,
H. A. Nguyen,
Y. Curé,
J. -M. Gérard,
J. Claudon,
F. Donatini,
J. -Ph. Poizat
Abstract:
We use strain to statically tune the semiconductor band gap of individual InAs quantum dots (QDs) embedded in a GaAs photonic wire featuring very efficient single photon collection efficiency. Thanks to the geometry of the structure, we are able to shift the QD excitonic transition by more than 20 meV by using nano-manipulators to apply the stress. Moreover, owing to the strong transverse strain g…
▽ More
We use strain to statically tune the semiconductor band gap of individual InAs quantum dots (QDs) embedded in a GaAs photonic wire featuring very efficient single photon collection efficiency. Thanks to the geometry of the structure, we are able to shift the QD excitonic transition by more than 20 meV by using nano-manipulators to apply the stress. Moreover, owing to the strong transverse strain gradient generated in the structure, we can relatively tune two QDs located in the wire waveguide and bring them in resonance, opening the way to the observation of collective effects such as superradiance.
△ Less
Submitted 9 February, 2018;
originally announced February 2018.
-
Giant non-linear interaction between two optical beams via a quantum dot embeddedin a photonic wire
Authors:
H. A Nguyen,
T. Grange,
B Reznychenko,
I. Yeo,
P. -L De Assis,
D Tumanov,
F Fratini,
N Malik,
E Dupuy,
N Gregersen,
A Auffèves,
J. -M Gérard,
J Claudon,
J. -Ph Poizat
Abstract:
Optical non-linearities usually appear for large intensities, but discrete transitions allow for giant non-linearities operating at the single photon level. This has been demonstrated in the last decade for a single optical mode with cold atomic gases, or single two-level systems coupled to light via a tailored photonic environment. Here we demonstrate a two-modes giant non-linearity by using a…
▽ More
Optical non-linearities usually appear for large intensities, but discrete transitions allow for giant non-linearities operating at the single photon level. This has been demonstrated in the last decade for a single optical mode with cold atomic gases, or single two-level systems coupled to light via a tailored photonic environment. Here we demonstrate a two-modes giant non-linearity by using a three-level structure in a single semiconductor quantum dot (QD) embedded in a photonic wire antenna. The large coupling efficiency and the broad operation bandwidth of the photonic wire enable us to have two different laser beams interacting with the QD in order to control the reflectivity of a laser beam with the other one using as few as 10 photons per QD lifetime. We discuss the possibilities offered by this easily integrable system for ultra-low power logical gates and optical quantum gates.
△ Less
Submitted 9 March, 2018; v1 submitted 11 May, 2017;
originally announced May 2017.
-
Electric field sensing with a scanning fiber-coupled quantum dot
Authors:
D. Cadeddu,
M. Munsch,
N. Rossi,
J. Claudon,
J. -M. Gérard,
R. J. Warburton,
M. Poggio
Abstract:
We demonstrate the application of a fiber-coupled quantum-dot-in-a-tip as a probe for scanning electric field microscopy. We map the out-of-plane component of the electric field induced by a pair of electrodes by measurement of the quantum-confined Stark effect induced on a quantum dot spectral line. Our results are in agreement with finite element simulations of the experiment. Furthermore, we pr…
▽ More
We demonstrate the application of a fiber-coupled quantum-dot-in-a-tip as a probe for scanning electric field microscopy. We map the out-of-plane component of the electric field induced by a pair of electrodes by measurement of the quantum-confined Stark effect induced on a quantum dot spectral line. Our results are in agreement with finite element simulations of the experiment. Furthermore, we present results from analytic calculations and simulations which are relevant to any electric field sensor embedded in a dielectric tip. In particular, we highlight the impact of the tip geometry on both the resolution and sensitivity.
△ Less
Submitted 5 May, 2017;
originally announced May 2017.
-
Dislocation-free axial InAs-on-GaAs nanowires on silicon
Authors:
Daria V. Beznasyuk,
Eric Robin,
Martien Den Hertog,
Julien Claudon,
Moïra Hocevar
Abstract:
We report on the growth of axial InAs-on-GaAs nanowire heterostructures on silicon by molecular beam epitaxy using 20 nm diameter Au catalysts. First, the growth parameters of the GaAs nanowire segment were optimized to achieve a pure wurtzite crystal structure. Then, we developed a two-step growth procedure to enhance the yield of vertical InAs-on-GaAs nanowires. We achieved 90% of straight InAs-…
▽ More
We report on the growth of axial InAs-on-GaAs nanowire heterostructures on silicon by molecular beam epitaxy using 20 nm diameter Au catalysts. First, the growth parameters of the GaAs nanowire segment were optimized to achieve a pure wurtzite crystal structure. Then, we developed a two-step growth procedure to enhance the yield of vertical InAs-on-GaAs nanowires. We achieved 90% of straight InAs-on-GaAs nanowires by further optimizing the growth parameters. We investigated the composition change at the interface by energy dispersive X-ray spectroscopy and the nanowire crystal structure by transmission electron microscopy. The nominal composition of the InAs segment is found to be In$_{x}$Ga$_{1-x}$As with $x$=0.85 and corresponds to 6% of lattice mismatch with GaAs. Strain mapping performed by the geometrical phase analysis of high-resolution images revealed a dislocation-free GaAs/InAs interface. In conclusion, we successfully fabricated highly mismatched heterostructures, confirming the prediction that axial GaAs/InAs interfaces are pseudomorphic in nanowires below 40 nm diameter.
△ Less
Submitted 4 July, 2017; v1 submitted 19 April, 2017;
originally announced April 2017.
-
Resonant driving of a single photon emitter embedded in a mechanical oscillator
Authors:
Mathieu Munsch,
Andreas V. Kuhlmann,
Davide Cadeddu,
Jean-Michel Gérard,
Julien Claudon,
Martino Poggio,
Richard J. Warburton
Abstract:
Coupling a microscopic mechanical resonator to a nano-scale quantum system enables control of the mechanical resonator via the quantum system, and vice versa. The coupling is usually achieved through functionalization of the mechanical resonator but this results in additional mass and dissipation channels. An alternative is an intrinsic coupling based on strain. We employ here a monolithic semicon…
▽ More
Coupling a microscopic mechanical resonator to a nano-scale quantum system enables control of the mechanical resonator via the quantum system, and vice versa. The coupling is usually achieved through functionalization of the mechanical resonator but this results in additional mass and dissipation channels. An alternative is an intrinsic coupling based on strain. We employ here a monolithic semiconductor system. The nano-scale quantum system is a quantum dot; the mechanical resonator a microscopic trumpet which simultaneously optimizes the mechanical and photonic properties. The quantum dot transition is driven resonantly. Via the resonance fluorescence, we observe mechanical Brownian motion even at 4K, and demonstrate a coupling to mechanical modes of different types. We identify a mechanical mode with a cooperativity larger than one. We show analytically that the Heisenberg limit on displacement measurement can be reached with an embedded two-level system in the case of a transform-limited optical emitter with perfect photon detection. We argue that operation close to the Heisenberg limit is achievable with state-of-the-art quantum dot devices.
△ Less
Submitted 10 August, 2016;
originally announced August 2016.
-
Strain-gradient mapping of semiconductor quantum dots
Authors:
P. -L De Assis,
I Yeo,
A Gloppe,
H. A. Nguyen,
D Tumanov,
E Dupont-Ferrier,
N. S. Malik,
E Dupuy,
J Claudon,
J. -M Gérard,
Alexia Auffèves,
O Arcizet,
Maxime Richard,
J. -Ph Poizat
Abstract:
In the context of fast developing quantum technologies, locating single quantum objects embedded in solid or fluid environment while keeping their properties unchanged is a crucial requirement as well as a challenge. Such "quantum microscopes" have been demonstrated already for NV-centers embedded in diamond [1], and for single atoms within an ultracold gas [2]. In this work, we demonstrate a new…
▽ More
In the context of fast developing quantum technologies, locating single quantum objects embedded in solid or fluid environment while keeping their properties unchanged is a crucial requirement as well as a challenge. Such "quantum microscopes" have been demonstrated already for NV-centers embedded in diamond [1], and for single atoms within an ultracold gas [2]. In this work, we demonstrate a new method to determine non-destructively the position of randomly distributed semiconductor quantum dots (QDs) deeply embedded in a solid photonic waveguide. By setting the wire in an oscillating motion, we generate large stress gradients across the QDs plane. We then exploit the fact that the QDs emission frequency is highly sensitive to the local material stress [3-5] to infer their positions with an accuracy ranging from +/- 35 nm down to +/-1 nm for close-to-axis QDs.
△ Less
Submitted 15 September, 2016; v1 submitted 21 July, 2016;
originally announced July 2016.
-
Harvesting, coupling and control of single exciton coherences in photonic waveguide antennas
Authors:
Q. Mermillod,
T. Jakubczyk,
V. Delmonte,
A. Delga,
E. Peinke,
J-M. Gérard,
J. Claudon,
J. Kasprzak
Abstract:
We perform coherent non-linear spectroscopy of individual excitons strongly confined in single InAs quantum dots (QDs). The retrieval of their intrinsically weak four-wave mixing (FWM) response is enabled by a one-dimensional dielectric waveguide antenna. Compared to a similar QD embedded in bulk media, the FWM detection sensitivity is enhanced by up to four orders of magnitude, over a broad opera…
▽ More
We perform coherent non-linear spectroscopy of individual excitons strongly confined in single InAs quantum dots (QDs). The retrieval of their intrinsically weak four-wave mixing (FWM) response is enabled by a one-dimensional dielectric waveguide antenna. Compared to a similar QD embedded in bulk media, the FWM detection sensitivity is enhanced by up to four orders of magnitude, over a broad operation bandwidth. Three-beam FWM is employed to investigate coherence and population dynamics within individual QD transitions. We retrieve their homogenous dephasing in a presence of spectral wandering. Two-dimensional FWM reveals off-resonant Förster coupling between a pair of distinct QDs embedded in the antenna. We also detect a higher order QD non-linearity (six-wave mixing) and use it to coherently control the FWM transient. Waveguide antennas enable to conceive multi-color coherent manipulation schemes of individual emitters.
△ Less
Submitted 8 April, 2016;
originally announced April 2016.
-
Large and uniform optical emission shifts in quantum dots externally strained along their growth axis
Authors:
Petr Stepanov,
Marta Elzo Aizarna,
Joël Bleuse,
Nitin S. Malik,
Yoann Curé,
Eric Gautier,
Vincent Favre-Nicolin,
Jean-Michel Gérard,
Julien Claudon
Abstract:
We introduce a method which enables to directly compare the impact of elastic strain on the optical properties of distinct quantum dots (QDs). Specifically, the QDs are integrated in a cross-section of a semiconductor core wire which is surrounded by an amorphous straining shell. Detailed numerical simulations show that, thanks to the mechanical isotropy of the shell, the strain field in a core se…
▽ More
We introduce a method which enables to directly compare the impact of elastic strain on the optical properties of distinct quantum dots (QDs). Specifically, the QDs are integrated in a cross-section of a semiconductor core wire which is surrounded by an amorphous straining shell. Detailed numerical simulations show that, thanks to the mechanical isotropy of the shell, the strain field in a core section is homogeneous. Furthermore, we use the core material as an in situ strain gauge, yielding reliable values for the emitter energy tuning slope. This calibration technique is applied to self-assembled InAs QDs submitted to incremental tensile strain along their growth axis. In contrast to recent studies conducted on similar QDs stressed perpendicularly to their growth axis, optical spectroscopy reveals 5-10 times larger tuning slopes, with a moderate dispersion. These results highlight the importance of the stress direction to optimise QD response to applied strain, with implications both in static and dynamic regimes. As such, they are in particular relevant for the development of wavelength-tunable single photon sources or hybrid QD opto-mechanical systems.
△ Less
Submitted 22 February, 2016;
originally announced February 2016.
-
Optimal all-optical switching of a microcavity resonance in the telecom range using the electronic Kerr effect
Authors:
Emre Yüce,
Georgios Ctistis,
Julien Claudon,
Jean-Michel Gérard,
Willem L. Vos
Abstract:
We have switched GaAs/AlAs and AlGaAs/AlAs planar microcavities that operate in the "Original" (O) telecom band by exploiting the instantaneous electronic Kerr effect. We observe that the resonance frequency reversibly shifts within one picosecond. We investigate experimentally and theoretically the role of several main parameters: the material backbone and its electronic bandgap, the pump power,…
▽ More
We have switched GaAs/AlAs and AlGaAs/AlAs planar microcavities that operate in the "Original" (O) telecom band by exploiting the instantaneous electronic Kerr effect. We observe that the resonance frequency reversibly shifts within one picosecond. We investigate experimentally and theoretically the role of several main parameters: the material backbone and its electronic bandgap, the pump power, the quality factor, and the duration of the switch pulse. The magnitude of the shift is reduced when the backbone of the central $λ-$layer has a greater electronic bandgap; pumping with photon energies near the bandgap resonantly enhances the switched magnitude. Our model shows that the magnitude of the resonance frequency shift depends on the pump pulse duration and is maximized when the duration matches the cavity storage time that is set by the quality factor. We provide the settings for the essential parameters so that the frequency shift of the cavity resonance can be increased to one linewidth.
△ Less
Submitted 7 March, 2016; v1 submitted 11 August, 2015;
originally announced August 2015.
-
A quantum fiber-pigtail
Authors:
Davide Cadeddu,
Jean Teissier,
Floris Braakman,
Niels Gregersen,
Petr Stepanov,
Jean-Michel Gérard,
Julien Claudon,
Richard J. Warburton,
Martino Poggio,
Mathieu Munsch
Abstract:
We present the experimental realization of a quantum fiber-pigtail. The device consists of a semiconductor quantum-dot embedded into a conical photonic wire that is directly connected to the core of a fiber-pigtail. We demonstrate a photon collection efficiency at the output of the fiber of 5.8% and suggest realistic improvements for the implementation of a useful device in the context of quantum…
▽ More
We present the experimental realization of a quantum fiber-pigtail. The device consists of a semiconductor quantum-dot embedded into a conical photonic wire that is directly connected to the core of a fiber-pigtail. We demonstrate a photon collection efficiency at the output of the fiber of 5.8% and suggest realistic improvements for the implementation of a useful device in the context of quantum information. We finally discuss potential applications in scanning probe microscopy.
△ Less
Submitted 22 June, 2015;
originally announced June 2015.
-
Nonlinear frequency conversion is controlled by vacuum fluctuations
Authors:
Emre Yüce,
Georgios Ctistis,
Julien Claudon,
Jean-Michel Gérard,
Willem L. Vos
Abstract:
Ever since the advent of nonlinear optics, the generation of light by frequency-conversion is drawing continued attention, and leading to emerging applications such as supercontinuum sources for ultra stable clocks and advanced microscopy. A modern approach to frequency-conversion is to switch light confined in micro- and nanocavity resonances to enable on-chip operation. Supposedly, nonlinear fre…
▽ More
Ever since the advent of nonlinear optics, the generation of light by frequency-conversion is drawing continued attention, and leading to emerging applications such as supercontinuum sources for ultra stable clocks and advanced microscopy. A modern approach to frequency-conversion is to switch light confined in micro- and nanocavity resonances to enable on-chip operation. Supposedly, nonlinear frequency conversion in such confined media differs from traditional non-linear optics in three key features regarding output spectrum, frequency shift, and critical time scale. Therefore, we switch GaAs-AlAs microcavities by the electronic Kerr effect, and study a range of quality factors to bridge the confined and the traditional non-linear regimes. We uncover the key role of the density of vacuum fluctuations, i.e., the local density of optical states (LDOS) for newly generated frequencies, a concept inspired by cavity quantum electrodynamics (cQED). As a result, we succeed to establish a framework, which not only describes nonlinear optics both in traditional bulk and in confined media but also opens a new control dimension in changing the color of light.
△ Less
Submitted 15 April, 2019; v1 submitted 13 June, 2014;
originally announced June 2014.
-
Differential ultrafast all-optical switching of the resonances of a micropillar cavity
Authors:
Henri Thyrrestrup,
Emre Yüce,
Georgios Ctistis,
Julien Claudon,
Willem L. Vos,
Jean-Michel Gérard
Abstract:
We perform frequency- and time-resolved all-optical switching of a GaAs-AlAs micropillar cavity using an ultrafast pump-probe setup. The switching is achieved by two-photon excitation of free carriers. We track the cavity resonances in time with a high frequency resolution. The pillar modes exhibit simultaneous frequency shifts, albeit with markedly different maximum switching amplitudes and relax…
▽ More
We perform frequency- and time-resolved all-optical switching of a GaAs-AlAs micropillar cavity using an ultrafast pump-probe setup. The switching is achieved by two-photon excitation of free carriers. We track the cavity resonances in time with a high frequency resolution. The pillar modes exhibit simultaneous frequency shifts, albeit with markedly different maximum switching amplitudes and relaxation dynamics. These differences stem from the non-uniformity of the free carrier density in the micropillar, and are well understood by taking into account the spatial distribution of injected free carriers, their spatial diffusion and surface recombination at micropillar sidewalls.
△ Less
Submitted 24 September, 2014; v1 submitted 9 January, 2014;
originally announced January 2014.
-
Strain-mediated coupling in a quantum dot-mechanical oscillator hybrid system
Authors:
Inah Yeo,
Pierre-Louis de Assis,
Arnaud Gloppe,
Eva Dupont-Ferrier,
Pierre Verlot,
Nitin S. Malik,
Emmanuel Dupuy,
Julien Claudon,
Jean-Michel Gérard,
Alexia Auffèves,
Gilles Nogues,
Signes Seidelin,
Jean-Philippe Poizat,
Olivier Arcizet,
Maxime Richard
Abstract:
Recent progress in nanotechnology has allowed to fabricate new hybrid systems where a single two-level system is coupled to a mechanical nanoresonator. In such systems the quantum nature of a macroscopic degree of freedom can be revealed and manipulated. This opens up appealing perspectives for quantum information technologies, and for the exploration of quantum-classical boundary. Here we present…
▽ More
Recent progress in nanotechnology has allowed to fabricate new hybrid systems where a single two-level system is coupled to a mechanical nanoresonator. In such systems the quantum nature of a macroscopic degree of freedom can be revealed and manipulated. This opens up appealing perspectives for quantum information technologies, and for the exploration of quantum-classical boundary. Here we present the experimental realization of a monolithic solid-state hybrid system governed by material strain: a quantum dot is embedded within a nanowire featuring discrete mechanical resonances corresponding to flexural vibration modes. Mechanical vibrations result in a time-varying strain field that modulates the quantum dot transition energy. This approach simultaneously offers a large light extraction efficiency and a large exciton-phonon coupling strength $g_0$. By means of optical and mechanical spectroscopy, we find that $g_0/2π$ is nearly as large as the mechanical frequency, a criterion which defines the ultra-strong coupling regime.
△ Less
Submitted 18 June, 2013;
originally announced June 2013.
-
All-optical Switching of a Microcavity Repeated at Terahertz Rates
Authors:
Emre Yüce,
Georgios Ctistis,
Julien Claudon,
Emmanuel Dupuy,
Robin D. Buijs,
Bob de Ronde,
Allard P. Mosk,
Jean-Michel Gérard,
Willem L. Vos
Abstract:
We have performed ultrafast pump-probe experiments on a GaAs-AlAs microcavity with a resonance near 1300 nm in the "original" telecom band. We exploit the virtually instantaneous electronic Kerr effect to repeatedly and reproducibly switch a GaAs-AlAs planar microcavity. We achieve repetition times as fast as 300 fs, thereby breaking the THz modulation barrier. The rate of the switching in our exp…
▽ More
We have performed ultrafast pump-probe experiments on a GaAs-AlAs microcavity with a resonance near 1300 nm in the "original" telecom band. We exploit the virtually instantaneous electronic Kerr effect to repeatedly and reproducibly switch a GaAs-AlAs planar microcavity. We achieve repetition times as fast as 300 fs, thereby breaking the THz modulation barrier. The rate of the switching in our experiments is only determined by optics and not by material related relaxation. Our results offer novel opportunities for fundamental studies of cavity-QED and optical information processing in sub-picosecond time scale.
△ Less
Submitted 8 November, 2012;
originally announced November 2012.
-
The photonic trumpet: An efficient, broadband interface between a solid-state quantum emitter and a Gaussian beam
Authors:
Mathieu Munsch,
Nitin S. Malik,
Niels Gregersen,
Joël Bleuse,
Emmanuel Dupuy,
Adrien Delga,
Jesper Mørk,
Jean-Michel Gérard,
Julien Claudon
Abstract:
We introduce the photonic trumpet, a dielectric structure which ensures a nearly perfect coupling between an embedded quantum light source and a Gaussian free-space beam. A photonic trumpet exploits both the broadband spontaneous emission control provided by a single-mode photonic wire and the adiabatic expansion of this mode within a conical taper. Numerical simulations highlight the outstanding…
▽ More
We introduce the photonic trumpet, a dielectric structure which ensures a nearly perfect coupling between an embedded quantum light source and a Gaussian free-space beam. A photonic trumpet exploits both the broadband spontaneous emission control provided by a single-mode photonic wire and the adiabatic expansion of this mode within a conical taper. Numerical simulations highlight the outstanding performance and robustness of this concept. As a first application in the field of quantum optics, we report the realisation of an ultra-bright single-photon source. The device, a GaAs photonic trumpet containing few InAs quantum dots, demonstrates a first-lens external efficiency of $0.75 \pm 0.1$.
△ Less
Submitted 24 September, 2012;
originally announced September 2012.
-
Competition between electronic Kerr and free carrier effects in an ultimate-fast optically switched semiconductor microcavity
Authors:
E. Yüce,
G. Ctistis,
J. Claudon,
E. Dupuy,
K. J. Boller,
J. M. Gérard,
W. L. Vos
Abstract:
We have performed ultrafast pump-probe experiments on a GaAs-AlAs microcavity with a resonance near 1300 nm in the "original" telecom band. We concentrate on ultimate-fast optical switching of the cavity resonance that is measured as a function of pump-pulse energy. We observe that at low pump-pulse energies the switching of the cavity resonance is governed by the instantaneous electronic Kerr eff…
▽ More
We have performed ultrafast pump-probe experiments on a GaAs-AlAs microcavity with a resonance near 1300 nm in the "original" telecom band. We concentrate on ultimate-fast optical switching of the cavity resonance that is measured as a function of pump-pulse energy. We observe that at low pump-pulse energies the switching of the cavity resonance is governed by the instantaneous electronic Kerr effect and is achieved within 300 fs. At high pump-pulse energies the index change induced by free carriers generated in the GaAs start to compete with the electronic Kerr effect and reduce the resonance frequency shift. We have developed an analytic model which predicts this competition in agreement with the experimental data. Our model includes a new term in the intensity-dependent refractive index that considers the effect of the probe pulse intensity, which is resonantly enhanced by the cavity. We calculate the effect of the resonantly enhanced probe light on the refractive index change induced by the electronic Kerr effect for cavities with different quality factors. By exploiting the linear regime where only the electronic Kerr effect is observed, we manage to retrieve the nondegenerate third order nonlinear susceptibility for GaAs from the cavity resonance shift as a function of pump-pulse energy.
△ Less
Submitted 17 August, 2012; v1 submitted 1 May, 2012;
originally announced May 2012.
-
Surface effects in a semiconductor photonic nanowire and spectral stability of an embedded single quantum dot
Authors:
Inah Yeo,
Nitin S. Malik,
Mathieu Munsch,
Emmanuel Dupuy,
Joël Bleuse,
Yann-Michel Niquet,
Jean-Michel Gérard,
Julien Claudon,
Édouard Wagner,
Signe Seidelin,
Alexia Auffèves,
Jean-Philippe Poizat,
Gilles Nogues
Abstract:
We evidence the influence of surface effects for InAs quantum dots embedded into GaAs photonic nanowires used as efficient single photon sources. We observe a continuous temporal drift of the emission energy that is an obstacle to resonant quantum optics experiments at the single photon level. We attribute the drift to the sticking of oxygen molecules onto the wire, which modifies the surface char…
▽ More
We evidence the influence of surface effects for InAs quantum dots embedded into GaAs photonic nanowires used as efficient single photon sources. We observe a continuous temporal drift of the emission energy that is an obstacle to resonant quantum optics experiments at the single photon level. We attribute the drift to the sticking of oxygen molecules onto the wire, which modifies the surface charge and hence the electric field seen by the quantum dot. The influence of temperature and excitation laser power on this phenomenon is studied. Most importantly, we demonstrate a proper treatment of the nanowire surface to suppress the drift.
△ Less
Submitted 16 December, 2011;
originally announced December 2011.
-
Non-linear coupling between the two oscillation modes of a dc-SQUID
Authors:
Florent Lecocq,
Julien Claudon,
Olivier Buisson,
Pérola Milman
Abstract:
We make a detailed theoretical description of the two-dimensional nature of a dc-SQUID, analyzing the coupling between its two orthogonal phase oscillation modes. While it has been shown that the mode defined as "longitudinal" can be initialized, manipulated and measured, so as to encode a quantum bit of information, the mode defined as "transverse" is usually repelled at high frequency and does n…
▽ More
We make a detailed theoretical description of the two-dimensional nature of a dc-SQUID, analyzing the coupling between its two orthogonal phase oscillation modes. While it has been shown that the mode defined as "longitudinal" can be initialized, manipulated and measured, so as to encode a quantum bit of information, the mode defined as "transverse" is usually repelled at high frequency and does not interfere in the dynamics. We show that, using typical parameters of existing devices, the transverse mode energy can be made of the order of the longitudinal one. In this regime, we can observe a strong coupling between these modes, described by an Hamiltonian providing a wide range of interesting effects, such as conditional quantum operations and entanglement. This coupling also creates an atomic-like structure for the combined two mode states, with a V-like scheme.
△ Less
Submitted 14 September, 2011; v1 submitted 12 September, 2011;
originally announced September 2011.
-
Ultimate fast optical switching of a planar microcavity in the telecom wavelength range
Authors:
Georgios Ctistis,
Emre Yüce,
Alex Hartsuiker,
Julien Claudon,
Maela Bazin,
Jean-Michel Gérard,
Willem L. Vos
Abstract:
We have studied a GaAs-AlAs planar microcavity with a resonance near 1300 nm in the telecom range by ultrafast pump-probe reflectivity. By the judicious choice of pump frequency, we observe a ultimate fast and reversible decrease of the resonance frequency by more than half a linewidth due to the instantaneous electronic Kerr effect. The switch-on and switch-off? of the cavity is only limited by t…
▽ More
We have studied a GaAs-AlAs planar microcavity with a resonance near 1300 nm in the telecom range by ultrafast pump-probe reflectivity. By the judicious choice of pump frequency, we observe a ultimate fast and reversible decrease of the resonance frequency by more than half a linewidth due to the instantaneous electronic Kerr effect. The switch-on and switch-off? of the cavity is only limited by the cavity storage time of ?tcav = 0.3ps and not by intrinsic material parameters. Our results pave the way to supra-THz switching rates for on-chip data modulation and real-time cavity quantum electrodynamics.
△ Less
Submitted 30 March, 2011; v1 submitted 16 February, 2011;
originally announced February 2011.
-
Optical characterization and selective addressing of the resonant modes of a micropillar cavity with a white light beam
Authors:
Georgios Ctistis,
Alex Hartsuiker,
Edwin van der Pol,
Julien Claudon,
Willem L. Vos,
Jean-Michel Gérard
Abstract:
We have performed white-light reflectivity measurements on GaAs/AlAs micropillar cavities with diameters ranging from 1 μm up to 20 μm. We are able to resolve the spatial field distribution of each cavity mode in real space by scanning a small-sized beam across the top facet of each micropillar. We spectrally resolve distinct transverse optical cavity modes in reflectivity. Using this procedure we…
▽ More
We have performed white-light reflectivity measurements on GaAs/AlAs micropillar cavities with diameters ranging from 1 μm up to 20 μm. We are able to resolve the spatial field distribution of each cavity mode in real space by scanning a small-sized beam across the top facet of each micropillar. We spectrally resolve distinct transverse optical cavity modes in reflectivity. Using this procedure we can selectively address a single mode in the multimode micropillar cavity. Calculations for the coupling efficiency of a small-diameter beam to each mode are in very good agreement with our reflectivity measurements.
△ Less
Submitted 10 November, 2010; v1 submitted 2 July, 2010;
originally announced July 2010.
-
Observation of a stronger-than-adiabatic change of light trapped in an ultrafast switched GaAs-AlAs microcavity
Authors:
Philip J. Harding,
Huib J. Bakker,
Alex Hartsuiker,
Julien Claudon,
Allard P. Mosk,
Jean-Michel Gerard,
Willem L. Vos
Abstract:
We study the time-resolved reflectivity spectrum of a switched planar GaAs-AlAs microcavity. Between 5 and 40 ps after the switching (pump) pulse we observe a strong excess probe reflectivity and a change of the frequency of light trapped in the cavity up to 5 linewidths away from the cavity resonance. This frequency change does not adiabatically follow the fast-changing cavity resonance. The freq…
▽ More
We study the time-resolved reflectivity spectrum of a switched planar GaAs-AlAs microcavity. Between 5 and 40 ps after the switching (pump) pulse we observe a strong excess probe reflectivity and a change of the frequency of light trapped in the cavity up to 5 linewidths away from the cavity resonance. This frequency change does not adiabatically follow the fast-changing cavity resonance. The frequency change is attributed to an accumulated phase change due to the time-dependent refractive index. An analytical model predicts dynamics in qualitative agreement with the experiments, and points to crucial parameters that control future applications.
△ Less
Submitted 18 December, 2011; v1 submitted 26 October, 2009;
originally announced October 2009.
-
Measuring the true quality factor of an ultrafast photonic microcavity: homogeneous versus inhomogeneous broadening
Authors:
Alex Hartsuiker,
Allard P. Mosk,
Julien Claudon,
Jean-Michel Gérard,
Willem L. Vos
Abstract:
We have measured time-resolved the photon storage time and the quality factor of an ultrafast photonic cavity using an autocorrelator. The cavity consists of a $λ$-thick GaAs layer sandwiched between GaAs/AlAs distributed Bragg reflectors and resonates at 985 nm wavelength. The inverse relative linewidth measured with white light reflectivity is 830, while the quality factor obtained from the ti…
▽ More
We have measured time-resolved the photon storage time and the quality factor of an ultrafast photonic cavity using an autocorrelator. The cavity consists of a $λ$-thick GaAs layer sandwiched between GaAs/AlAs distributed Bragg reflectors and resonates at 985 nm wavelength. The inverse relative linewidth measured with white light reflectivity is 830, while the quality factor obtained from the time resolved measurements is 1500. The photon storage time in the cavity is 0.78 ps. We show that the difference between the quality factor and the inverse relative linewidth results from inhomogeneous broadening of the microcavity resonance due to a spatial gradient in the cavity layer.
△ Less
Submitted 11 June, 2009; v1 submitted 10 June, 2009;
originally announced June 2009.
-
Rabi-like oscillations of an anharmonic oscillator: classical versus quantum interpretation
Authors:
Julien Claudon,
Alex Zazunov,
Frank W. J. Hekking,
Olivier Buisson
Abstract:
We have observed Rabi-like oscillations in a current-biased dc SQUID presenting enhanced coherence times compared to our previous realization \cite{Claudon_PRL04}. This Josephson device behaves as an anharmonic oscillator which can be driven into a coherent superposition of quantum states by resonant microwave flux pulses. Increasing the microwave amplitude, we study the evolution of the Rabi fr…
▽ More
We have observed Rabi-like oscillations in a current-biased dc SQUID presenting enhanced coherence times compared to our previous realization \cite{Claudon_PRL04}. This Josephson device behaves as an anharmonic oscillator which can be driven into a coherent superposition of quantum states by resonant microwave flux pulses. Increasing the microwave amplitude, we study the evolution of the Rabi frequency from the 2-level regime to the regime of multilevel dynamics. When up to 3 levels are involved, the Rabi frequency is a clear signature of quantum behavior. At higher excitation amplitude, classical and quantum predictions for the Rabi frequency converge. This result is discussed in the light of a calculation of the Wigner function. In particular, our analysis shows that pronounced quantum interferences always appear in the course of the Rabi-like oscillations.
△ Less
Submitted 10 September, 2008; v1 submitted 24 September, 2007;
originally announced September 2007.
-
Nanosecond quantum state detection in a current biased dc SQUID
Authors:
J. Claudon,
A. Fay,
E. Hoskinson,
O. Buisson
Abstract:
This article presents our procedure to measure the quantum state of a dc SQUID within a few nanoseconds, using an adiabatic dc flux pulse. Detection of the ground state is governed by standard macroscopic quantum theory (MQT), with a small correction due to residual noise in the bias current. In the two level limit, where the SQUID constitutes a phase qubit, an observed contrast of 0.54 indicate…
▽ More
This article presents our procedure to measure the quantum state of a dc SQUID within a few nanoseconds, using an adiabatic dc flux pulse. Detection of the ground state is governed by standard macroscopic quantum theory (MQT), with a small correction due to residual noise in the bias current. In the two level limit, where the SQUID constitutes a phase qubit, an observed contrast of 0.54 indicates a significant loss in contrast compared to the MQT prediction. It is attributed to spurious depolarization (loss of excited state occupancy) during the leading edge of the adiabatic flux measurement pulse. We give a simple phenomenological relaxation model which is able to predict the observed contrast of multilevel Rabi oscillations for various microwave amplitudes.
△ Less
Submitted 20 February, 2007;
originally announced February 2007.
-
Decoherence processes in a current biased dc SQUID
Authors:
J. Claudon,
A. Fay,
L. P. Lévy,
O. Buisson
Abstract:
A current bias dc SQUID behaves as an anharmonic quantum oscillator controlled by a bias current and an applied magnetic flux. We consider here its two level limit consisting of the two lower energy states $| 0 \right>$ and $| 1 \right>$. We have measured energy relaxation times and microwave absorption for different bias currents and fluxes in the low microwave power limit. Decoherence times ar…
▽ More
A current bias dc SQUID behaves as an anharmonic quantum oscillator controlled by a bias current and an applied magnetic flux. We consider here its two level limit consisting of the two lower energy states $| 0 \right>$ and $| 1 \right>$. We have measured energy relaxation times and microwave absorption for different bias currents and fluxes in the low microwave power limit. Decoherence times are extracted. The low frequency flux and current noise have been measured independently by analyzing the probability of current switching from the superconducting to the finite voltage state, as a function of applied flux. The high frequency part of the current noise is derived from the electromagnetic environment of the circuit. The decoherence of this quantum circuit can be fully accounted by these current and flux noise sources.
△ Less
Submitted 23 January, 2006;
originally announced January 2006.
-
Observation of transition from escape dynamics to underdamped phase diffusion in a Josephson junction
Authors:
J. M. Kivioja,
T. E. Nieminen,
J. Claudon,
O. Buisson,
F. W. J. Hekking,
J. P. Pekola
Abstract:
We have investigated the dynamics of underdamped Josephson junctions. In addition to the usual crossover between macroscopic quantum tunnelling and thermally activated (TA) behaviour we observe in our samples with relatively small Josephson coupling E_J, for the first time, the transition from TA behaviour to underdamped phase diffusion. Above the crossover temperature the threshold for switchin…
▽ More
We have investigated the dynamics of underdamped Josephson junctions. In addition to the usual crossover between macroscopic quantum tunnelling and thermally activated (TA) behaviour we observe in our samples with relatively small Josephson coupling E_J, for the first time, the transition from TA behaviour to underdamped phase diffusion. Above the crossover temperature the threshold for switching into the finite voltage state becomes extremely sharp. We propose a (T,E_J) phase-diagram with various regimes and show that for a proper description of it dissipation and level quantization in a metastable well are crucial.
△ Less
Submitted 17 January, 2005;
originally announced January 2005.
-
Coherent oscillations in a superconducting multi-level quantum system
Authors:
J. Claudon,
F. Balestro,
F. W. J. Hekking,
O. Buisson
Abstract:
We have observed coherent time evolution of states in a multi-level quantum system, formed by a current-biased dc SQUID. The manipulation of the quantum states is achieved by resonant microwave pulses of flux. The number of quantum states participating in the coherent oscillations increases with increasing microwave power. Quantum measurement is performed by a nanosecond flux pulse which project…
▽ More
We have observed coherent time evolution of states in a multi-level quantum system, formed by a current-biased dc SQUID. The manipulation of the quantum states is achieved by resonant microwave pulses of flux. The number of quantum states participating in the coherent oscillations increases with increasing microwave power. Quantum measurement is performed by a nanosecond flux pulse which projects the final state onto one of two different voltage states of the dc SQUID, which can be read out.
△ Less
Submitted 12 October, 2004; v1 submitted 19 May, 2004;
originally announced May 2004.
-
Evidence of two-dimensional macroscopic quantum tunneling of a current-biased DC-SQUID
Authors:
F. Balestro,
J. Claudon,
J. P. Pekola,
O. Buisson
Abstract:
The escape probability out of the superconducting state of a hysteretic DC-SQUID has been measured at different values of the applied magnetic flux. At low temperature, the escape current and the width of the probability distribution are temperature independent but they depend on flux. Experimental results do not fit the usual one-dimensional (1D) Macroscopic Quantum Tunneling (MQT) law but are…
▽ More
The escape probability out of the superconducting state of a hysteretic DC-SQUID has been measured at different values of the applied magnetic flux. At low temperature, the escape current and the width of the probability distribution are temperature independent but they depend on flux. Experimental results do not fit the usual one-dimensional (1D) Macroscopic Quantum Tunneling (MQT) law but are perfectly accounted for by the two-dimensional (2D) MQT behaviour as we propose here. Near zero flux, our data confirms the recent MQT observation in a DC-SQUID \cite{Li02}.
△ Less
Submitted 27 August, 2003;
originally announced August 2003.
