Showing 1–22 of 22 results for author: Clanet, C

Validation of a propulsion model in front crawl swimming

Authors: Thomas Brunel, Charlie Prétot, Christophe Clanet, Baptiste Bolon, Frédérique Larrarte, Caroline Cohen, Rémi Arthur Carmigniani

Abstract: A propulsion model has been proposed for front crawl swimming (Carmigniani et al., 2020). The aim of this study is to validate this model through a progressive speed test using instrumented paddles to estimate the propulsion forces in swimming. A propulsion model has been proposed for front crawl swimming (Carmigniani et al., 2020). The aim of this study is to validate this model through a progressive speed test using instrumented paddles to estimate the propulsion forces in swimming. △ Less

Submitted 18 December, 2023; originally announced December 2023.

Pendulums, Drops and Rods: a physical analogy

Authors: Benoît Roman, Cyprien Gay, Christophe Clanet

Abstract: A liquid meniscus, a bending rod (also called elastica) and a simple pendulum are all described by the same non-dimensional equation. The oscillatory regime of the pendulum corresponds to buckling rods and pendant drops, and the high-velocity regime corresponds to spherical drops, puddles and multiple rod loopings. We study this analogy in a didactic way and discuss how, despite this common govern… ▽ More A liquid meniscus, a bending rod (also called elastica) and a simple pendulum are all described by the same non-dimensional equation. The oscillatory regime of the pendulum corresponds to buckling rods and pendant drops, and the high-velocity regime corresponds to spherical drops, puddles and multiple rod loopings. We study this analogy in a didactic way and discuss how, despite this common governing equation, the three systems are not completely equivalent. We also consider the cylindrical deformations of an inextensible, flexible membrane containing a liquid, which in some sense interpolates between the meniscus and rod conformations. △ Less

Submitted 4 June, 2020; originally announced June 2020.

Hysteretic wave drag in shallow water

Authors: GP Benham, R Bendimerad, M Benzaquen, C Clanet

Abstract: During motion from deep to shallow water, multiple equilibria may emerge, each with identical drag - a phenomenon that can be explained by a localised amplification of the wave drag near the shallow wave speed. The implication of this is the emergence of several previously unstudied bifurcation patterns and hysteresis routes. Here, we address these nonlinear dynamics by considering the quasi-stead… ▽ More During motion from deep to shallow water, multiple equilibria may emerge, each with identical drag - a phenomenon that can be explained by a localised amplification of the wave drag near the shallow wave speed. The implication of this is the emergence of several previously unstudied bifurcation patterns and hysteresis routes. Here, we address these nonlinear dynamics by considering the quasi-steady motion of a body between deep and shallow water, where the depth is slowly varying. We survey several theoretical models for the drag, compare these against our tow-tank experimental measurements, and then use the validated theory to explore the bifurcation patterns using two parameters: the depth of motion and the forcing. In particular, using a case study of a lake with a sinusoidal depth profile, we illustrate that hysteresis effects can play a significant role on the speed of motion and journey time, presenting interesting implications for naval and racing applications. △ Less

Submitted 23 March, 2020; v1 submitted 1 March, 2020; originally announced March 2020.

Journal ref: Phys. Rev. Fluids 5, 064803 (2020)

Brachistochrone on a Velodrome

Authors: GP Benham, C Cohen, E Brunet, C Clanet

Abstract: The Brachistochrone problem, which describes the curve that carries a particle under gravity in a vertical plane from one height to another in the shortest time, is one of the most famous studies in classical physics. There is a similar problem in track cycling, where a cyclist aims to find the trajectory on the curved sloping surface of a velodrome that results in the minimum lap time. In this pa… ▽ More The Brachistochrone problem, which describes the curve that carries a particle under gravity in a vertical plane from one height to another in the shortest time, is one of the most famous studies in classical physics. There is a similar problem in track cycling, where a cyclist aims to find the trajectory on the curved sloping surface of a velodrome that results in the minimum lap time. In this paper we extend the classical Brachistochrone problem to find the optimum cycling trajectory in a velodrome, treating the cyclist as an active particle. Starting with two canonical cases of cycling on a sloping plane and a cone, where analytical solutions are found, we then solve the problem numerically on the reconstructed surface of the velodrome in Montigny le Bretonneux, France. Finally, we discuss the parameters of the problem and the effects of fatigue. △ Less

Submitted 5 March, 2020; v1 submitted 6 August, 2019; originally announced August 2019.

Nanorheology of interfacial water during ice gliding

Authors: L. Canale, J. Comtet, A. Nigues, C. Cohen, C. Clanet, A. Siria, L. Bocquet

Abstract: The slipperiness of ice is an everyday-life phenomenon which, surprisingly, remains controversial despite a long scientific history. The very small friction measured on ice is classically attributed to the presence of a thin self-lubricating film of meltwater between the slider and the ice. But while the macroscale friction behavior of ice and snow has been widely investigated, very little is know… ▽ More The slipperiness of ice is an everyday-life phenomenon which, surprisingly, remains controversial despite a long scientific history. The very small friction measured on ice is classically attributed to the presence of a thin self-lubricating film of meltwater between the slider and the ice. But while the macroscale friction behavior of ice and snow has been widely investigated, very little is known about the interfacial water film and its mechanical properties. In this work, we develop a stroke-probe force measurement technique to uncover the microscopic mechanisms underlying ice lubrication. We simultaneously measure the shear friction of a bead on ice and quantify the in-situ mechanical properties of the interfacial film, as well as its thickness, under various regimes of speed and temperature. In contrast with standard views, meltwater is found to exhibit a complex visco-elastic rheology, with a viscosity up to two orders of magnitude larger than pristine water. The non-conventional rheology of meltwater provides a new, consistent, rationale for ice slipperiness. Hydrophobic coatings are furthermore shown to strongly reduce friction due to a surprising change in the local viscosity, providing an unexpected explanation for waxing effects in winter sports. Beyond ice friction, our results suggest new avenues towards self-healing lubricants to achieve ultra-low friction. △ Less

Submitted 2 July, 2019; originally announced July 2019.

Comments: supplemental materials on request

Journal ref: Phys. Rev. X 9, 041025 (2019)

Gait transition in swimming

Authors: Remi Carmigniani, Ludovic Seifert, Didier Chollet, Christophe Clanet

Abstract: The skill to swim fast results from the interplay between generating high thrust while minimizing drag. In front crawl, swimmers achieve this goal by adapting their inter-arm coordination according to the race pace. A transition has been observed from a catch-up pattern of coordination (i.e. lag time between the propulsion of the two arms) to a superposition pattern of coordination as the velocity… ▽ More The skill to swim fast results from the interplay between generating high thrust while minimizing drag. In front crawl, swimmers achieve this goal by adapting their inter-arm coordination according to the race pace. A transition has been observed from a catch-up pattern of coordination (i.e. lag time between the propulsion of the two arms) to a superposition pattern of coordination as the velocity increases. Expert swimmers choose a catch-up coordination pattern at low velocities with a constant relative lag time of glide during the cycle and switch to a maximum propulsion force strategy at higher velocities. This transition is explained using a burst-and-coast model. At low velocities, the choice of coordination can be understood through two parameters: the time of propulsion and the gliding effectiveness. These parameters can characterize a swimmer and help to optimize their technique. △ Less

Submitted 15 June, 2019; originally announced June 2019.

Comments: Manuscript submitted to PNAS (not accepted at the time of submission on arXiv)

Physics of rowing oars

Authors: Romain Labbé, Jean-Philippe Boucher, Christophe Clanet, Michael Benzaquen

Abstract: In each rowing sport, the oars have their very own characteristics most of the time selected through a long time experience. Here we address experimentally and theoretically the problem of rowing efficiency as function of row lengths and blades sizes. In contrast with previous studies which consider imposed kinematics, we set an imposed force framework which is closer to human constraints. We find… ▽ More In each rowing sport, the oars have their very own characteristics most of the time selected through a long time experience. Here we address experimentally and theoretically the problem of rowing efficiency as function of row lengths and blades sizes. In contrast with previous studies which consider imposed kinematics, we set an imposed force framework which is closer to human constraints. We find that optimal row lengths and blades sizes depend on sports and athletes strength, and provide an optimisation scheme. △ Less

Submitted 11 April, 2019; originally announced April 2019.

Comments: 17 pages, 9 figures

Superhydrophobic frictions

Authors: Timothée Mouterde, Pascal S. Raux, Christophe Clanet, David Quéré

Abstract: Contrasting with its sluggish behavior on standard solids, water is extremely mobile on superhydrophobic materials, as shown for instance by the continuous acceleration of drops on tilted water-repellent leaves. For much longer substrates, however, drops reach a terminal velocity that results from a balance between weight and friction, allowing us to question the nature of this friction. We report… ▽ More Contrasting with its sluggish behavior on standard solids, water is extremely mobile on superhydrophobic materials, as shown for instance by the continuous acceleration of drops on tilted water-repellent leaves. For much longer substrates, however, drops reach a terminal velocity that results from a balance between weight and friction, allowing us to question the nature of this friction. We report that the relationship between force and terminal velocity is non-linear. This is interpreted by showing that classical sources of friction are minimized, so that the aerodynamical resistance to motion becomes dominant, which eventually explains the matchless mobility of water. Our results are finally extended to viscous liquids, also known to be unusually quick on these materials. △ Less

Submitted 8 April, 2019; originally announced April 2019.

Wave drag on asymmetric bodies

Authors: GP Benham, JP Boucher, R Labbe, M Benzaquen, C Clanet

Abstract: An asymmetric body with a sharp leading edge and a rounded trailing edge produces a smaller wave disturbance moving forwards than backwards, and this is reflected in the wave drag coefficient. This experimental fact is not captured by Michell's theory for wave drag (Michell 1898). In this study, we use a tow-tank experiment to investigate the effects of asymmetry on wave drag, and show that these… ▽ More An asymmetric body with a sharp leading edge and a rounded trailing edge produces a smaller wave disturbance moving forwards than backwards, and this is reflected in the wave drag coefficient. This experimental fact is not captured by Michell's theory for wave drag (Michell 1898). In this study, we use a tow-tank experiment to investigate the effects of asymmetry on wave drag, and show that these effects can be replicated by modifying Michell's theory to include the growth of a symmetry-breaking boundary layer. We show that asymmetry can have either a positive or a negative effect on drag, depending on the depth of motion and the Froude number. △ Less

Submitted 20 February, 2019; originally announced February 2019.

Two recipes for repelling hot water

Authors: Timothée Mouterde, Pierre Lecointre, Gaëlle Lehoucq, Antonio Checco, Christophe Clanet, David Quéré

Abstract: Although a hydrophobic microtexture at a solid surface most often reflects rain owing to the presence of entrapped air within the texture, it is much more challenging to repel hot water. As it contacts a colder material, hot water generates condensation within the cavities at the solid surface, which eventually builds bridges between the substrate and the water, and thus destroys repellency. Here… ▽ More Although a hydrophobic microtexture at a solid surface most often reflects rain owing to the presence of entrapped air within the texture, it is much more challenging to repel hot water. As it contacts a colder material, hot water generates condensation within the cavities at the solid surface, which eventually builds bridges between the substrate and the water, and thus destroys repellency. Here we show that both "small" (~100 nm) and "large" (~10 μm) model features do reflect hot drops at any drop temperature and in the whole range of explored impact velocities. Hence, we can define two structural recipes for repelling hot water: drops on nanometric features hardly stick owing to the miniaturization of water bridges, whereas kinetics of condensation in large features is too slow to connect the liquid to the solid at impact. △ Less

Submitted 3 April, 2019; v1 submitted 16 October, 2018; originally announced October 2018.

Journal ref: Nat. Comm. 10(1):1410 (2019)

Thin or bulky: optimal aspect ratios for ship hulls

Authors: Jean-Philippe Boucher, Romain Labbé, Christophe Clanet, Michael Benzaquen

Abstract: Empirical data reveals a broad variety of hull shapes among the different ship categories. We present a minimal theoretical approach to address the problem of ship hull optimisation. We show that optimal hull aspect ratios result -- at given load and propulsive power -- from a subtle balance between wave drag, pressure drag and skin friction. Slender hulls are more favourable in terms of wave drag… ▽ More Empirical data reveals a broad variety of hull shapes among the different ship categories. We present a minimal theoretical approach to address the problem of ship hull optimisation. We show that optimal hull aspect ratios result -- at given load and propulsive power -- from a subtle balance between wave drag, pressure drag and skin friction. Slender hulls are more favourable in terms of wave drag and pressure drag, while bulky hulls have a smaller wetted surface for a given immersed volume, by that reducing skin friction. We confront our theoretical results to real data and discuss discrepancies in the light of hull designer constraints, such as stability or manoeuvrability. △ Less

Submitted 22 June, 2018; v1 submitted 28 March, 2018; originally announced March 2018.

Comments: 8 pages, 7 figures, 1 table

Journal ref: Phys. Rev. Fluids 3, 074802 (2018)

Drop Trampoline

Authors: Pierre Chantelot, Martin Coux, Christophe Clanet, David Quéré

Abstract: Rigid superhydrophobic materials have the ability to repel millimetric water drops, in typically 10 ms. Yet, most natural water-repellent materials can be deformed by impacting drops. To test the effect of deformability, we perform impacts of non-wetting drops onto thin ($\sim$ 10 \micro m), circular PDMS membranes. The bouncing mechanism is markedly modified compared to that on a rigid material:… ▽ More Rigid superhydrophobic materials have the ability to repel millimetric water drops, in typically 10 ms. Yet, most natural water-repellent materials can be deformed by impacting drops. To test the effect of deformability, we perform impacts of non-wetting drops onto thin ($\sim$ 10 \micro m), circular PDMS membranes. The bouncing mechanism is markedly modified compared to that on a rigid material: the liquid leaves the substrate as it is kicked upwards by the membrane. We show that the rebound is controlled by an interplay between the dynamics of the drop and that of the soft substrate, so that we can continuously vary the contact time by playing on the membrane's characteristics and reduce it up to 70\%. △ Less

Submitted 15 June, 2018; v1 submitted 9 October, 2017; originally announced October 2017.

Wicking in a powder

Authors: Pascal S. Raux, Héloise Cockenpot, Marco Ramaioli, David Quéré, Christophe Clanet

Abstract: We investigate the wicking in granular media by considering layers of grains at the surface of a liquid, and discuss the critical contact angle below which spontaneous impregnation takes place. This angle is found to be on the order of 55° for monodisperse layers, significantly smaller than 90°, the threshold value for penetrating assemblies of tubes: owing to geometry, impregnating grains is more… ▽ More We investigate the wicking in granular media by considering layers of grains at the surface of a liquid, and discuss the critical contact angle below which spontaneous impregnation takes place. This angle is found to be on the order of 55° for monodisperse layers, significantly smaller than 90°, the threshold value for penetrating assemblies of tubes: owing to geometry, impregnating grains is more demanding than impregnating tubes. We also consider the additional effects of polydispersity and pressure on this wetting transition and discuss the corresponding shift observed on the critical contact angle. △ Less

Submitted 9 April, 2013; v1 submitted 3 January, 2013; originally announced January 2013.

Comments: 21 pages, 13 figures

Reshaping and Capturing Leidenfrost drops with a magnet

Authors: Keyvan Piroird, Baptiste Darbois Texier, Christophe Clanet, David Quéré

Abstract: Liquid oxygen, which is paramagnetic, also undergoes Leidenfrost effect at room temperature. In this article, we first study the deformation of oxygen drops in a magnetic field and show that it can be described via an effective capillary length, which includes the magnetic force. In a second part, we describe how these ultra-mobile drops passing above a magnet significantly slow down and can even… ▽ More Liquid oxygen, which is paramagnetic, also undergoes Leidenfrost effect at room temperature. In this article, we first study the deformation of oxygen drops in a magnetic field and show that it can be described via an effective capillary length, which includes the magnetic force. In a second part, we describe how these ultra-mobile drops passing above a magnet significantly slow down and can even be trapped. The critical velocity below which a drop is captured is determined from the deformation induced by the field. △ Less

Submitted 26 March, 2013; v1 submitted 21 October, 2012; originally announced October 2012.

Comments: Published in Physics of Fluids (vol. 25, 032108, 2013) http://pof.aip.org/resource/1/phfle6/v25/i3/p032108_s1?isAuthorized=no

Surface explosion cavities

Authors: Adrien Benusiglio, David Quéré, Christophe Clanet

Abstract: We present a fluid dynamics video on cavities created by explosions of firecrackers at the water free surface. We use three types of firecrackers containing 1, 1.3 and 5 g of flash powder. The firecrackers are held with their center at the surface of water in a cubic meter pool. The movies are recorded from the side with a high-speed video camera. Without confinement the explosion produces an hemi… ▽ More We present a fluid dynamics video on cavities created by explosions of firecrackers at the water free surface. We use three types of firecrackers containing 1, 1.3 and 5 g of flash powder. The firecrackers are held with their center at the surface of water in a cubic meter pool. The movies are recorded from the side with a high-speed video camera. Without confinement the explosion produces an hemispherical cavity. Right after the explosion this cavity grows isotropically, the bottom then stops while the sides continue to expand. In the next phase the bottom of the cavity accelerates backwards to the surface. During this phase the convergence of the flow creates a central jet that rises above the free surface. In the last part of the video the explosion is confined in a vertical open tube made of glass and of centimetric diameter. The explosion creates a cylindrical cavity that develops towards the free end of the tube. Depending on the charge, the cavity can either stop inside the tube or at its exit, but never escapes. △ Less

Submitted 12 October, 2012; originally announced October 2012.

Comments: Gallery of Fluid Motion 2012

Grabbing water

Authors: P. M. Reis, J. Hure, S. Jung, J. W. M. Bush, C. Clanet

Abstract: We introduce a novel technique for grabbing water with a flexible solid. This new passive pipetting mechanism was inspired by floating flowers and relies purely on the coupling of the elasticity of thin plates and the hydrodynamic forces at the liquid interface. Developing a theoretical model has enabled us to design petal-shaped objects with maximum grabbing capacity. We introduce a novel technique for grabbing water with a flexible solid. This new passive pipetting mechanism was inspired by floating flowers and relies purely on the coupling of the elasticity of thin plates and the hydrodynamic forces at the liquid interface. Developing a theoretical model has enabled us to design petal-shaped objects with maximum grabbing capacity. △ Less

Submitted 16 July, 2012; originally announced July 2012.

Journal ref: Soft Matter 6, 5705-5708 (2010)

Paramagnetic Leidenfrost Drops

Authors: Keyvan Piroird, Baptiste Darbois Texier, Christophe Clanet, David Quéré

Abstract: We present a fluid dynamics video showing the behavior of drops of liquid oxygen, at room temperature. Due to their low boiling point, these drops levitate on a cushion of their own vapour. This property gives them a high mobility, as known more generally in such Leidenfrost situations. But liquid oxygen is also paramagnetic, and thus likely to be manipulated using a magnet. It is first shown that… ▽ More We present a fluid dynamics video showing the behavior of drops of liquid oxygen, at room temperature. Due to their low boiling point, these drops levitate on a cushion of their own vapour. This property gives them a high mobility, as known more generally in such Leidenfrost situations. But liquid oxygen is also paramagnetic, and thus likely to be manipulated using a magnet. It is first shown that the shape of the drop can be modified by changing the drop/magnet distance; approaching the magnet acts as reinforcing gravity, so that the drops get flattened by this action. The transformation is of course reversible: as the magnet is withdrawn, the liquid recovers its quasi-spherical shape. Magnets can also be used to trap the oxygen drops. As they pass above a magnet, they slow down significantly, a consequence of their deformation: despite a very low friction, the vibrations induced by the drop deformations represent an important source of dissipation: below a well-defined velocity, drops can even be stopped in the magnetic trap. Quicker ones can be decelerated and then captured by series of magnets. Oberving the same events from the top reveals the complex shapes adopted by the liquid as it crosses the traps. △ Less

Submitted 13 October, 2010; originally announced October 2010.

Comments: There is a video included (Paramagnetic_Leidenfrost_Drops.mpg)

Beating the teapot effect

Authors: C. Duez, C. Ybert, C. Clanet, L. Bocquet

Abstract: We investigate the dripping of liquids around solid surfaces in the regime of inertial flows, a situation commonly encountered with the so-called "teapot effect". We demonstrate that surface wettability is an unexpected key factor in controlling flow separation and dripping, the latter being completely suppressed in the limit of superhydrophobic substrates. This unforeseen coupling is rationaliz… ▽ More We investigate the dripping of liquids around solid surfaces in the regime of inertial flows, a situation commonly encountered with the so-called "teapot effect". We demonstrate that surface wettability is an unexpected key factor in controlling flow separation and dripping, the latter being completely suppressed in the limit of superhydrophobic substrates. This unforeseen coupling is rationalized in terms of a novel hydro-capillary adhesion framework, which couples inertial flows to surface wettability effects. This description of flow separation successfully captures the observed dependence on the various experimental parameters - wettability, flow velocity, solid surface edge curvature-. As a further illustration of this coupling, a real-time control of dripping is demonstrated using electro-wetting for contact angle actuation. △ Less

Submitted 17 October, 2009; originally announced October 2009.

Comments: 4 pages; movies at http://lpmcn.univ-lyon1.fr/~lbocquet

Journal ref: Phys. Rev. Lett. vol 104, 084503 (2010)

Osmotically driven pipe flows and their relation to sugar transport in plants

Authors: K. H. Jensen, E. Rio, R. Hansen, C. Clanet, T. Bohr

Abstract: In plants, osmotically driven flows are believed to be responsible for translocation of sugar in the pipe-like phloem cell network, spanning the entire length of the plant. In this paper, we present an experimental and theoretical study of transient osmotically driven flows through pipes with semipermeable walls. We extend the experimental work of Eschrich, Evert and Young \cite[]{Eschrich:1972}… ▽ More In plants, osmotically driven flows are believed to be responsible for translocation of sugar in the pipe-like phloem cell network, spanning the entire length of the plant. In this paper, we present an experimental and theoretical study of transient osmotically driven flows through pipes with semipermeable walls. We extend the experimental work of Eschrich, Evert and Young \cite[]{Eschrich:1972} by providing a more accurate version of their experiment allowing for better comparison with theory. In the experiments we measure the dynamics and structure of a "sugar front", i.e. the transport and decay of a sudden loading of sugar in a pipe which is closed in both ends. We include measurements of pressure inside the membrane tube allowing us to compare the experiments directly with theory and, in particular, to confirm quantitatively the exponential decay of the front in a closed tube.In a novel setup we are able to measure the entire concentration profile as the sugar front moves. In contrast to previous studies we find very good agreement between experiment and theory. In the limit of low axial resistance (valid in our experiments as well as in many cases in plants) we show that the equations can be solved exactly by the method of characteristics yielding, in general, an implicit solution. Further we show that under more general conditions the equations of motion can be rewritten as a single integro-differential equation, which can be readily solved numerically. The applicability of our results to plants is discussed and it is shown that it is probable that the pressure-flow hypothesis can account for short distance transport of sugar in plants. △ Less

Submitted 22 October, 2008; originally announced October 2008.

Comments: 34 pages, Submitted to Journal of Fluid Mechanics on May 28, 2008

Making a splash with water repellency

Authors: Cyril Duez, Christophe Ybert, Christophe Clanet, Lyderic Bocquet

Abstract: A 'splash' is usually heard when a solid body enters water at large velocity. This phenomena originates from the formation of an air cavity resulting from the complex transient dynamics of the free interface during the impact. The classical picture of impacts on free surfaces relies solely on fluid inertia, arguing that surface properties and viscous effects are negligible at sufficiently large… ▽ More A 'splash' is usually heard when a solid body enters water at large velocity. This phenomena originates from the formation of an air cavity resulting from the complex transient dynamics of the free interface during the impact. The classical picture of impacts on free surfaces relies solely on fluid inertia, arguing that surface properties and viscous effects are negligible at sufficiently large velocities. In strong contrast to this large-scale hydrodynamic viewpoint, we demonstrate in this study that the wettability of the impacting body is a key factor in determining the degree of splashing. This unexpected result is illustrated in Fig.1: a large cavity is evident for an impacting hydrophobic sphere (1.b), contrasting with the hydrophilic sphere's impact under the very same conditions (1.a). This unforeseen fact is furthermore embodied in the dependence of the threshold velocity for air entrainment on the contact angle of the impacting body, as well as on the ratio between the surface tension and fluid viscosity, thereby defining a critical capillary velocity. As a paradigm, we show that superhydrophobic impacters make a big 'splash' for any impact velocity. This novel understanding provides a new perspective for impacts on free surfaces, and reveals that modifications of the detailed nature of the surface -- involving physico-chemical aspects at the nanometric scales -- provide an efficient and versatile strategy for controlling the water entry of solid bodies at high velocity. △ Less

Submitted 5 January, 2007; originally announced January 2007.

Comments: accepted for publication in Nature Physics

Journal ref: Nature Physics, vol 3 p 180 (2007)

Water spring: a model for bouncing drops

Authors: K. Okumura, F. Chevy, C. Clanet, D. Richard, D. Quere

Abstract: It has been shown that a water drop can bounce persistently, when thrown on a super-hydrophobic substrate. We present here scaling arguments which allow us to predict the maximal deformation and the contact time of the drop. This approach is completed by a model describing the flow inside the drop, and by original experimental data. It has been shown that a water drop can bounce persistently, when thrown on a super-hydrophobic substrate. We present here scaling arguments which allow us to predict the maximal deformation and the contact time of the drop. This approach is completed by a model describing the flow inside the drop, and by original experimental data. △ Less

Submitted 12 February, 2003; v1 submitted 6 December, 2002; originally announced December 2002.

Journal ref: Europhys. Lett. 62, 237-243 (2003)

Gravitational oscillations of a liquid column

Authors: Elise Lorenceau, David Quere, Jean-Yves Ollitrault, Christophe Clanet

Abstract: We report gravity oscillations of a liquid column partially immersed in a bath of liquid. We stress in particular some peculiarities of this system, namely (i) the fact that the mass of this oscillator constantly changes with time; (ii) the singular character of the beginning of the rise, for which the mass of the oscillator is zero; (iii) the sources of dissipation in this system, which is foun… ▽ More We report gravity oscillations of a liquid column partially immersed in a bath of liquid. We stress in particular some peculiarities of this system, namely (i) the fact that the mass of this oscillator constantly changes with time; (ii) the singular character of the beginning of the rise, for which the mass of the oscillator is zero; (iii) the sources of dissipation in this system, which is found to be dominated at low viscosity by the entrance (or exit) effects, leading to a long-range damping of the oscillations. We conclude with some qualitative description of a second-order phenomenon, namely the eruption of a jet at the beginning of the rise. △ Less

Submitted 28 June, 2001; originally announced June 2001.

Comments: 22 pages, pdf. Submitted to Physics of Fluids