-
Gaia Data Release 2. Calibration and mitigation of electronic offset effects in the data
Authors:
N. C. Hambly,
M. Cropper,
S. Boudreault,
C. Crowley,
R. Kohley,
J. H. J. de Bruijne,
C. Dolding,
C. Fabricius,
G. Seabroke,
M. Davidson,
N. Rowell,
R. Collins,
N. Cross,
J. Martin-Fleitas,
S. Baker,
M. Smith,
P. Sartoretti,
O. Marchal,
D. Katz,
F. de Angeli,
G. Busso,
M. Riello,
C. Allende Prieto,
S. Els,
L. Corcione
, et al. (8 additional authors not shown)
Abstract:
The European Space Agency Gaia satellite was launched into orbit around L2 in December 2013. This ambitious mission has strict requirements on residual systematic errors resulting from instrumental corrections in order to meet a design goal of sub-10 microarcsecond astrometry. During the design and build phase of the science instruments, various critical calibrations were studied in detail to ensu…
▽ More
The European Space Agency Gaia satellite was launched into orbit around L2 in December 2013. This ambitious mission has strict requirements on residual systematic errors resulting from instrumental corrections in order to meet a design goal of sub-10 microarcsecond astrometry. During the design and build phase of the science instruments, various critical calibrations were studied in detail to ensure that this goal could be met in orbit. In particular, it was determined that the video-chain offsets on the analogue side of the analogue-to-digital conversion electronics exhibited instabilities that could not be mitigated fully by modifications to the flight hardware. We provide a detailed description of the behaviour of the electronic offset levels on microsecond timescales, identifying various systematic effects that are known collectively as offset non-uniformities. The effects manifest themselves as transient perturbations on the gross zero-point electronic offset level that is routinely monitored as part of the overall calibration process. Using in-orbit special calibration sequences along with simple parametric models, we show how the effects can be calibrated, and how these calibrations are applied to the science data. While the calibration part of the process is relatively straightforward, the application of the calibrations during science data processing requires a detailed on-ground reconstruction of the readout timing of each charge-coupled device (CCD) sample on each device in order to predict correctly the highly time-dependent nature of the corrections. We demonstrate the effectiveness of our offset non-uniformity models in mitigating the effects in Gaia data. We demonstrate for all CCDs and operating instrument and modes on board Gaia that the video-chain noise-limited performance is recovered in the vast majority of science samples.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Gaia Radial Velocity Spectrometer
Authors:
M. Cropper,
D. Katz,
P. Sartoretti,
T. Prusti,
J. H. J. de Bruijne,
F. Chassat,
P. Charvet,
J. Boyadijan,
M. Perryman,
G. Sarri,
P. Gare,
M. Erdmann,
U. Munari,
T. Zwitter,
M. Wilkinson,
F. Arenou,
A. Vallenari,
A. Gómez,
P. Panuzzo,
G. Seabroke,
C. Allende Prieto,
K. Benson,
O. Marchal,
H. Huckle,
M. Smith
, et al. (18 additional authors not shown)
Abstract:
This paper presents the specification, design, and development of the Radial Velocity Spectrometer (RVS) on the European Space Agency's Gaia mission. Starting with the rationale for the full six dimensions of phase space in the dynamical modelling of the Galaxy, the scientific goals and derived top-level instrument requirements are discussed, leading to a brief description of the initial concepts…
▽ More
This paper presents the specification, design, and development of the Radial Velocity Spectrometer (RVS) on the European Space Agency's Gaia mission. Starting with the rationale for the full six dimensions of phase space in the dynamical modelling of the Galaxy, the scientific goals and derived top-level instrument requirements are discussed, leading to a brief description of the initial concepts for the instrument. The main part of the paper is a description of the flight RVS, considering the optical design, the focal plane, the detection and acquisition chain, and the as-built performance drivers and critical technical areas. After presenting the pre-launch performance predictions, the paper concludes with the post-launch developments and mitigation strategies, together with a summary of the in-flight performance at the end of commissioning.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Gaia: focus, straylight and basic angle
Authors:
A. Mora,
M. Biermann,
A. Bombrun,
J. Boyadian,
F. Chassat,
P. Corberand,
M. Davidson,
D. Doyle,
D. Escolar,
W. L. M. Gielesen,
T. Guilpain,
J. Hernandez,
V. Kirschner,
S. A. Klioner,
C. Koeck,
B. Laine,
L. Lindegren,
E. Serpell,
P. Tatry,
P Thoral
Abstract:
The Gaia all-sky astrometric survey is challenged by several issues affecting the spacecraft stability. Amongst them, we find the focus evolution, straylight and basic angle variations
Contrary to pre-launch expectations, the image quality is continuously evolving, during commissioning and the nominal mission. Payload decontaminations and wavefront sensor assisted refocuses have been carried out…
▽ More
The Gaia all-sky astrometric survey is challenged by several issues affecting the spacecraft stability. Amongst them, we find the focus evolution, straylight and basic angle variations
Contrary to pre-launch expectations, the image quality is continuously evolving, during commissioning and the nominal mission. Payload decontaminations and wavefront sensor assisted refocuses have been carried out to recover optimum performance. Straylight and basic angle variations several orders of magnitude greater than foreseen were found and studied during commissioning by the Gaia scientists (payload experts). Building on their investigations, an ESA-Airbus DS working group was established during the early nominal mission and worked on a detailed root cause analysis. In parallel, Gaia scientists have also continued analysing the data, most notably comparing the BAM signal to global astrometric solutions, with remarkable agreement.
In this contribution, a status review of these issues will be provided, with emphasis on the mitigation schemes and the lessons learned for future space missions where extreme stability is a key requirement.
△ Less
Submitted 21 August, 2016; v1 submitted 29 July, 2016;
originally announced August 2016.
-
The Gaia Basic angle: measurement and variations
Authors:
Alcione Mora,
Ulrich Bastian,
Michael Biermann,
François Chassat,
Lennart Lindegren,
Iñaki Serraller,
Edmund Serpell,
Wouter van Reeven
Abstract:
The ESA Gaia mission uses two telescopes to create the most ambitious survey of the Galaxy. The angle between them must be known with exquisite precision and accuracy. An interferometer: the Basic Angle Monitoring system measures its variations. High quality data have been retrieved and analysed for more than a year. A summary of the in-orbit performance and some early results are presented
The ESA Gaia mission uses two telescopes to create the most ambitious survey of the Galaxy. The angle between them must be known with exquisite precision and accuracy. An interferometer: the Basic Angle Monitoring system measures its variations. High quality data have been retrieved and analysed for more than a year. A summary of the in-orbit performance and some early results are presented
△ Less
Submitted 9 March, 2015;
originally announced March 2015.
-
Gaia on-board metrology: basic angle and best focus
Authors:
A. Mora,
M. Biermann,
A. G. A. Brown,
D. Busonero,
L. Carminati,
J. M. Carrasco,
F. Chassat,
M. Erdmann,
W. L. M. Gielesen,
C. Jordi,
D. Katz,
R. Kohley,
L. Lindegren,
W. Loeffler,
O. Marchal,
P. Panuzzo,
G. Seabroke,
J. Sahlmann,
E. Serpell,
I. Serraller,
F. van Leeuwen,
W. van Reeven,
T. C. van den Dool,
L. L. A. Vosteen
Abstract:
The Gaia payload ensures maximum passive stability using a single material, SiC, for most of its elements. Dedicated metrology instruments are, however, required to carry out two functions: monitoring the basic angle and refocusing the telescope. Two interferometers fed by the same laser are used to measure the basic angle changes at the level of $μ$as (prad, micropixel), which is the highest leve…
▽ More
The Gaia payload ensures maximum passive stability using a single material, SiC, for most of its elements. Dedicated metrology instruments are, however, required to carry out two functions: monitoring the basic angle and refocusing the telescope. Two interferometers fed by the same laser are used to measure the basic angle changes at the level of $μ$as (prad, micropixel), which is the highest level ever achieved in space. Two Shack-Hartmann wavefront sensors, combined with an ad-hoc analysis of the scientific data are used to define and reach the overall best-focus. In this contribution, the systems, data analysis, procedures and performance achieved during commissioning are presented
△ Less
Submitted 14 July, 2014;
originally announced July 2014.
-
In vivo measurement of human brain elasticity using a light aspiration device
Authors:
Patrick Schiavone,
Fabrice Chassat,
Thomas Boudou,
Emmanuel Promayon,
F. Valdivia,
Yohan Payan
Abstract:
The brain deformation that occurs during neurosurgery is a serious issue impacting the patient "safety" as well as the invasiveness of the brain surgery. Model-driven compensation is a realistic and efficient solution to solve this problem. However, a vital issue is the lack of reliable and easily obtainable patient-specific mechanical characteristics of the brain which, according to clinicians'…
▽ More
The brain deformation that occurs during neurosurgery is a serious issue impacting the patient "safety" as well as the invasiveness of the brain surgery. Model-driven compensation is a realistic and efficient solution to solve this problem. However, a vital issue is the lack of reliable and easily obtainable patient-specific mechanical characteristics of the brain which, according to clinicians' experience, can vary considerably. We designed an aspiration device that is able to meet the very rigorous sterilization and handling process imposed during surgery, and especially neurosurgery. The device, which has no electronic component, is simple, light and can be considered as an ancillary instrument. The deformation of the aspirated tissue is imaged via a mirror using an external camera. This paper describes the experimental setup as well as its use during a specific neurosurgery. The experimental data was used to calibrate a continuous model. We show that we were able to extract an in vivo constitutive law of the brain elasticity: thus for the first time, measurements are carried out per-operatively on the patient, just before the resection of the brain parenchyma. This paper discloses the results of a difficult experiment and provide for the first time in-vivo data on human brain elasticity. The results point out the softness as well as the highly non-linear behavior of the brain tissue.
△ Less
Submitted 8 April, 2009;
originally announced April 2009.