-
How to explain the sensitivity of DNA double-strand breaks yield to 125I position?
Authors:
Mario Enrique Alcocer Ávila,
Elif Hindié,
Christophe Champion
Abstract:
Purpose: Auger emitters exhibit interesting features due to their emission of a cascade of short-range Auger electrons. Maximum DNA breakage efficacy is achieved when decays occur near DNA. Studies of double-strand breaks (DSBs) yields in plasmids revealed cutoff distances from DNA axis of 10.5-12 Å, beyond which the mechanism of DSBs moves from direct to indirect effects, and the yield decreases…
▽ More
Purpose: Auger emitters exhibit interesting features due to their emission of a cascade of short-range Auger electrons. Maximum DNA breakage efficacy is achieved when decays occur near DNA. Studies of double-strand breaks (DSBs) yields in plasmids revealed cutoff distances from DNA axis of 10.5-12 Å, beyond which the mechanism of DSBs moves from direct to indirect effects, and the yield decreases rapidly. Some authors suggested that the average energy deposited in a DNA cylinder could explain such cutoffs. We aimed to study this hypothesis in further detail.Materials and methods: Using the Monte Carlo code CELLDOSE, we investigated the influence of the 125I atom position on energy deposits and absorbed doses per decay not only in a DNA cylinder, but also in individual strands, each modeled as 10 spheres encompassing the fragility sites for phosphodiester bond cleavage.Results: The dose per decay decreased much more rapidly for a sphere in the proximal strand than for the DNA cylinder. For example, when moving the 125I source from 10.5 Å to 11.5 Å, the average dose to the sphere dropped by 43%, compared to only 13% in the case of the cylinder.Conclusions: Explaining variations in DSBs yields with 125I position should consider the probability of inducing damage in the proximal strand (nearest to the 125I atom). The energy received by fragility sites in this strand is highly influenced by the isotropic (4$π$) emission of 125I low-energy Auger electrons. The positioning of Auger emitters for targeted radionuclide therapy can be envisioned accordingly.
△ Less
Submitted 16 September, 2024;
originally announced September 2024.
-
The Power Board of the KM3NeT Digital Optical Module: design, upgrade, and production
Authors:
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
E. Androutsou,
M. Anguita,
L. Aphecetche,
M. Ardid,
S. Ardid,
H. Atmani,
J. Aublin,
F. Badaracco,
L. Bailly-Salins,
Z. Bardacova,
B. Baret,
A. Bariego Quintana,
S. Basegmez du Pree,
Y. Becherini,
M. Bendahman,
F. Benfenati,
M. Benhassi,
D. M. Benoit
, et al. (259 additional authors not shown)
Abstract:
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant gl…
▽ More
The KM3NeT Collaboration is building an underwater neutrino observatory at the bottom of the Mediterranean Sea consisting of two neutrino telescopes, both composed of a three-dimensional array of light detectors, known as digital optical modules. Each digital optical module contains a set of 31 three inch photomultiplier tubes distributed over the surface of a 0.44 m diameter pressure-resistant glass sphere. The module includes also calibration instruments and electronics for power, readout and data acquisition. The power board was developed to supply power to all the elements of the digital optical module. The design of the power board began in 2013, and several prototypes were produced and tested. After an exhaustive validation process in various laboratories within the KM3NeT Collaboration, a mass production batch began, resulting in the construction of over 1200 power boards so far. These boards were integrated in the digital optical modules that have already been produced and deployed, 828 until October 2023. In 2017, an upgrade of the power board, to increase reliability and efficiency, was initiated. After the validation of a pre-production series, a production batch of 800 upgraded boards is currently underway. This paper describes the design, architecture, upgrade, validation, and production of the power board, including the reliability studies and tests conducted to ensure the safe operation at the bottom of the Mediterranean Sea throughout the observatory's lifespan
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Timing performances of NectarCAM, a Medium Sized Telescope Camera for the Cherenkov Telescope Array
Authors:
H. Rueda,
F. Bradascio,
J. A. Barrio,
J. Biteau,
F. Brun,
C. Champion,
J-F. Glicenstein,
D. Hoffmann,
P. Jean,
J. P. Lenain,
F. Louis,
A. Pérez,
M. Punch,
P. Sizun,
K-H. Sulanke,
L. A. Tejedor,
B. Vallage
Abstract:
NectarCAM is a Cherenkov camera that will be installed on Medium-Sized Telescopes of the northern array of the Cherenkov Telescope Array Observatory (CTAO). It is composed of 265 modules, each of which includes 7 photo-multiplier tubes, a Front-End Board and a camera trigger system for data collection. The first NectarCAM unit is currently being integrated at CEA Paris-Saclay in France. Once insta…
▽ More
NectarCAM is a Cherenkov camera that will be installed on Medium-Sized Telescopes of the northern array of the Cherenkov Telescope Array Observatory (CTAO). It is composed of 265 modules, each of which includes 7 photo-multiplier tubes, a Front-End Board and a camera trigger system for data collection. The first NectarCAM unit is currently being integrated at CEA Paris-Saclay in France. Once installed at the CTAO's northern site, the NectarCAM's timing abilities will be crucial for reducing noise in images, improving image cleaning, and distinguishing between gamma-ray photons and cosmic-ray background. Additionally, it will enable coincidence identification with neighboring telescopes for stereoscopic observations. The timing system of NectarCAM has been tested in a dark room with various light sources. The results of the tests, including timing precision and accuracy of the trigger arrival relative to a laser source, and the timing of individual and multiple pixel signals, will be presented.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
The NectarCAM Timing System
Authors:
F. Bradascio,
H. Rueda,
J. A. Barrio,
J. Biteau,
F. Brun,
C. Champion,
J-F. Glicenstein,
D. Hoffmann,
P. Jean,
J. P. Lenain,
F. Louis,
A. Pérez,
M. Punch,
P. Sizun,
K. -H. Sulanke,
L. A. Tejedor,
B. Vallage
Abstract:
NectarCAM is a Cherenkov camera which is going to equip the Medium-Sized Telescopes (MST) of the northern site of the Cherenkov Telescope Array Observatory (CTAO). NectarCAM is equipped with 265 modules, each consisting of 7 photo-multiplier tubes (PMTs), a Front-End Board and a local camera trigger system used for data acquisition. This paper addresses the timing performance of NectarCAM which ar…
▽ More
NectarCAM is a Cherenkov camera which is going to equip the Medium-Sized Telescopes (MST) of the northern site of the Cherenkov Telescope Array Observatory (CTAO). NectarCAM is equipped with 265 modules, each consisting of 7 photo-multiplier tubes (PMTs), a Front-End Board and a local camera trigger system used for data acquisition. This paper addresses the timing performance of NectarCAM which are crucial to reduce the noise in shower images and improve image cleaning as well as to discriminate between gamma-ray photons and cosmic-ray background and finally to allow coincidence identification with neighbouring telescopes for stereoscopic operations. Verification tests of the system have been performed in a dark room using various light sources to illuminate the first NectarCAM unit. The resulting timing precision and accuracy of the trigger arrival relative to a laser source, of individual and multiple pixel signals have been studied and are shown to comply to CTAO requirements.
△ Less
Submitted 28 June, 2023; v1 submitted 31 January, 2023;
originally announced January 2023.
-
RE-EDS Using GAFF Topologies: Application to Relative Hydration Free-Energy Calculations for Large Sets of Molecules
Authors:
Salome R. Rieder,
Benjamin Ries,
Kay Schaller,
Candide Champion,
Emilia P. Barros,
Philippe H. Huenenberger,
Sereina Riniker
Abstract:
Free-energy differences between pairs of end-states can be estimated based on molecular dynamics (MD) simulations using standard pathway-dependent methods such as thermodynamic integration (TI), free-energy perturbation, or Bennett's acceptance ratio. Replica-exchange enveloping distribution sampling (RE-EDS), on the other hand, allows for the sampling of multiple end-states in a single simulation…
▽ More
Free-energy differences between pairs of end-states can be estimated based on molecular dynamics (MD) simulations using standard pathway-dependent methods such as thermodynamic integration (TI), free-energy perturbation, or Bennett's acceptance ratio. Replica-exchange enveloping distribution sampling (RE-EDS), on the other hand, allows for the sampling of multiple end-states in a single simulation without the specification of any pathways. In this work, we use the RE-EDS method as implemented in GROMOS together with generalized AMBER force field (GAFF) topologies, converted to a GROMOS-compatible format with a newly developed GROMOS++ program amber2gromos, to compute relative hydration free energies for a series of benzene derivatives. The results obtained with RE-EDS are compared to the experimental data as well as calculated values from the literature. In addition, the estimated free-energy differences in water and in vacuum are compared to values from TI calculations carried out with GROMACS. The hydration free energies obtained using RE-EDS for multiple molecules are found to be in good agreement with both the experimental data and the results calculated using other free-energy methods. While all considered free-energy methods delivered accurate results, the RE-EDS calculations required the least amount of total simulation time. This work serves as a validation for the use of GAFF topologies with the GROMOS simulation package and the RE-EDS approach. Furthermore, the performance of RE-EDS for a large set of 28 end-states is assessed with promising results.
△ Less
Submitted 10 June, 2022; v1 submitted 4 April, 2022;
originally announced April 2022.
-
The Calibration Units of KM3NeT
Authors:
R. Le Breton,
M. Billault,
C. Boutonnet,
C. Champion,
S. Colonges,
A. Cosquer,
A. Creusot,
S. Henry,
A. Ilioni,
P. Keller,
P. Lagier,
R. Lahmann,
P. Lamare,
J. Lesrel,
M. Lindsey Clark,
J. Royon,
G. Riccobene,
D. Samtleben,
V. Van Elewyck
Abstract:
KM3NeT is a deep-sea infrastructure composed of two neutrino telescopes being deployed in the Mediterranean Sea: ARCA, near Sicily in Italy, designed for neutrino astronomy, and ORCA, near Toulon in France, designed for neutrino oscillation physics. To achieve the best performance, the exact location of the optical modules, affected by sea current, must be known at any time and the timing resoluti…
▽ More
KM3NeT is a deep-sea infrastructure composed of two neutrino telescopes being deployed in the Mediterranean Sea: ARCA, near Sicily in Italy, designed for neutrino astronomy, and ORCA, near Toulon in France, designed for neutrino oscillation physics. To achieve the best performance, the exact location of the optical modules, affected by sea current, must be known at any time and the timing resolution between optical modules must reach the nanosecond. Moreover, the properties of the environment in which the telescopes are deployed must be continuously monitored because they affect the timing and positioning calibration. KM3NeT is going to deploy several dedicated Calibration Units to meet these calibration goals. Because of the difference in size between ARCA and ORCA, the design of the Calibration Unit is not the same for the two sites. This proceeding describes all the devices, features and purposes of the Calibration Units with a focus on the ORCA Calibration Unit.
△ Less
Submitted 11 August, 2021; v1 submitted 28 July, 2021;
originally announced July 2021.
-
WLAN-Log-Based Superspreader Detection in the COVID-19 Pandemic
Authors:
Cheng Zhang,
Yunze Pan,
Yunqi Zhang,
Adam C. Champion,
Zhaohui Shen,
Dong Xuan,
Zhiqiang Lin,
Ness B. Shroff
Abstract:
Identifying "superspreaders" of disease is a pressing concern for society during pandemics such as COVID-19. Superspreaders represent a group of people who have much more social contacts than others. The widespread deployment of WLAN infrastructure enables non-invasive contact tracing via people's ubiquitous mobile devices. This technology offers promise for detecting superspreaders. In this paper…
▽ More
Identifying "superspreaders" of disease is a pressing concern for society during pandemics such as COVID-19. Superspreaders represent a group of people who have much more social contacts than others. The widespread deployment of WLAN infrastructure enables non-invasive contact tracing via people's ubiquitous mobile devices. This technology offers promise for detecting superspreaders. In this paper, we propose a general framework for WLAN-log-based superspreader detection. In our framework, we first use WLAN logs to construct contact graphs by jointly considering human symmetric and asymmetric interactions. Next, we adopt three vertex centrality measurements over the contact graphs to generate three groups of superspreader candidates. Finally, we leverage SEIR simulation to determine groups of superspreaders among these candidates, who are the most critical individuals for the spread of disease based on the simulation results. We have implemented our framework and evaluate it over a WLAN dataset with 41 million log entries from a large-scale university. Our evaluation shows superspreaders exist on university campuses. They change over the first few weeks of a semester, but stabilize throughout the rest of the term. The data also demonstrate that both symmetric and asymmetric contact tracing can discover superspreaders, but the latter performs better with daily contact graphs. Further, the evaluation shows no consistent differences among three vertex centrality measures for long-term (i.e., weekly) contact graphs, which necessitates the inclusion of SEIR simulation in our framework. We believe our proposed framework and these results may provide timely guidance for public health administrators regarding effective testing, intervention, and vaccination policies.
△ Less
Submitted 29 March, 2021; v1 submitted 22 February, 2021;
originally announced February 2021.
-
ACOUSTIC-TURF: Acoustic-based Privacy-Preserving COVID-19 Contact Tracing
Authors:
Yuxiang Luo,
Cheng Zhang,
Yunqi Zhang,
Chaoshun Zuo,
Dong Xuan,
Zhiqiang Lin,
Adam C. Champion,
Ness Shroff
Abstract:
In this paper, we propose a new privacy-preserving, automated contact tracing system, ACOUSTIC-TURF, to fight COVID-19 using acoustic signals sent from ubiquitous mobile devices. At a high level, ACOUSTIC-TURF adaptively broadcasts inaudible ultrasonic signals with randomly generated IDs in the vicinity. Simultaneously, the system receives other ultrasonic signals sent from nearby (e.g., 6 feet) u…
▽ More
In this paper, we propose a new privacy-preserving, automated contact tracing system, ACOUSTIC-TURF, to fight COVID-19 using acoustic signals sent from ubiquitous mobile devices. At a high level, ACOUSTIC-TURF adaptively broadcasts inaudible ultrasonic signals with randomly generated IDs in the vicinity. Simultaneously, the system receives other ultrasonic signals sent from nearby (e.g., 6 feet) users. In such a system, individual user IDs are not disclosed to others and the system can accurately detect encounters in physical proximity with 6-foot granularity. We have implemented a prototype of ACOUSTIC-TURF on Android and evaluated its performance in terms of acoustic-signal-based encounter detection accuracy and power consumption at different ranges and under various occlusion scenarios. Experimental results show that ACOUSTIC-TURF can detect multiple contacts within a 6-foot range for mobile phones placed in pockets and outside pockets. Furthermore, our acoustic-signal-based system achieves greater precision than wireless-signal-based approaches when contact tracing is performed through walls. ACOUSTIC-TURF correctly determines that people on opposite sides of a wall are not in contact with one another, whereas the Bluetooth-based approaches detect nonexistent contacts among them.
△ Less
Submitted 23 June, 2020;
originally announced June 2020.
-
Robust spectral clustering using LASSO regularization
Authors:
Camille Champion,
Blazère Mélanie,
Burcelin Rémy,
Loubes Jean-Michel,
Risser Laurent
Abstract:
Cluster structure detection is a fundamental task for the analysis of graphs, in order to understand and to visualize their functional characteristics. Among the different cluster structure detection methods, spectral clustering is currently one of the most widely used due to its speed and simplicity. Yet, there are few theoretical guarantee to recover the underlying partitions of the graph for ge…
▽ More
Cluster structure detection is a fundamental task for the analysis of graphs, in order to understand and to visualize their functional characteristics. Among the different cluster structure detection methods, spectral clustering is currently one of the most widely used due to its speed and simplicity. Yet, there are few theoretical guarantee to recover the underlying partitions of the graph for general models. This paper therefore presents a variant of spectral clustering, called 1-spectral clustering, performed on a new random model closely related to stochastic block model. Its goal is to promote a sparse eigenbasis solution of a 1 minimization problem revealing the natural structure of the graph. The effectiveness and the robustness to small noise perturbations of our technique is confirmed through a collection of simulated and real data examples.
△ Less
Submitted 8 April, 2020;
originally announced April 2020.
-
The Smart$^2$ Speaker Blocker: An Open-Source Privacy Filter for Connected Home Speakers
Authors:
Ilesanmi Olade,
Christopher Champion,
Haining Liang,
Charles Fleming
Abstract:
The popularity and projected growth of in-home smart speaker assistants, such as Amazon's Echo, has raised privacy concerns among consumers and privacy advocates. Notable questions regarding the collection and storage of user data by for-profit organizations include: what data is being collected and how is it being used, who has or can obtain access to such data, and how can user privacy be mainta…
▽ More
The popularity and projected growth of in-home smart speaker assistants, such as Amazon's Echo, has raised privacy concerns among consumers and privacy advocates. Notable questions regarding the collection and storage of user data by for-profit organizations include: what data is being collected and how is it being used, who has or can obtain access to such data, and how can user privacy be maintained while providing useful services. In addition to concerns regarding what the speaker manufacturer will do with your data, there are also more fundamental concerns about the security of these devices, third-party plugins, and the servers where they store recorded data.
To address these privacy and security concerns, we introduce an intermediary device to provide an additional layer of security, which we call the \textit{smart, smart speaker blocker} or Smart\textsuperscript{2} for short. By intelligently filtering sensitive conversations, and completely blocking this information from reaching a smart speaker's microphone(s), the Smart$^2$ Speaker Blocker is an open-source, network-local (offline) smart device that provides users with decisive control over what data leaves their living room.
△ Less
Submitted 20 July, 2020; v1 submitted 15 January, 2019;
originally announced January 2019.
-
COREclust: a new package for a robust and scalable analysis of complex data
Authors:
Camille Champion,
Anne-Claire Brunet,
Jean-Michel Loubes,
Laurent Risser
Abstract:
In this paper, we present a new R package COREclust dedicated to the detection of representative variables in high dimensional spaces with a potentially limited number of observations. Variable sets detection is based on an original graph clustering strategy denoted CORE-clustering algorithm that detects CORE-clusters, i.e. variable sets having a user defined size range and in which each variable…
▽ More
In this paper, we present a new R package COREclust dedicated to the detection of representative variables in high dimensional spaces with a potentially limited number of observations. Variable sets detection is based on an original graph clustering strategy denoted CORE-clustering algorithm that detects CORE-clusters, i.e. variable sets having a user defined size range and in which each variable is very similar to at least another variable. Representative variables are then robustely estimate as the CORE-cluster centers. This strategy is entirely coded in C++ and wrapped by R using the Rcpp package. A particular effort has been dedicated to keep its algorithmic cost reasonable so that it can be used on large datasets. After motivating our work, we will explain the CORE-clustering algorithm as well as a greedy extension of this algorithm. We will then present how to use it and results obtained on synthetic and real data.
△ Less
Submitted 25 May, 2018;
originally announced May 2018.
-
Agent-Based Implementation of Particle Hopping Traffic Model With Stochastic and Queuing Elements
Authors:
Camilla Champion,
Cody Champion
Abstract:
Lagging or halted traffic is bothersome. As such, it is desirable to have a model that can begin to determine the efficiency of various traffic standardizations. Our model intended to create a multifaceted realistic simulation of traffic flow while considering several factors. These factors included: passing conventions, e.g., right except to pass (REP) rule, system perturbation caused by insertio…
▽ More
Lagging or halted traffic is bothersome. As such, it is desirable to have a model that can begin to determine the efficiency of various traffic standardizations. Our model intended to create a multifaceted realistic simulation of traffic flow while considering several factors. These factors included: passing conventions, e.g., right except to pass (REP) rule, system perturbation caused by insertion of an accident into the system, accessible number of lanes available with the REP, various human factors such as variation of individual maximum speed and likelihood to pass. A succession of models were created from a variation on an existing single-lane traffic model and adding extra dimensionality to the lattice to include multiple lanes, passing conventions, stochastic elements for individuality, and queuing rules to movement algorithms. We found that the REP is an effective means of increasing the critical density that a system can support. Eliminating human factors and thereby automating the system, results in a 160% increase in the sustainable critical density of the system. The number of lanes increases the critical density of the system, but the maximum efficiency of the speed distribution remains the same. Excluding system automation, the optimal speed distribution for drivers maximal speed was found to be Beta(5,5). Accidents in stable systems can cause small local jams without causing global jams.
△ Less
Submitted 25 March, 2018;
originally announced March 2018.
-
TiCkS: A Flexible White-Rabbit Based Time-Stamping Board
Authors:
C. Champion,
M. Punch,
R. Oger,
S. Colonges,
Y. Moudden
Abstract:
We have developed the TiCkS board (Time and Clock Stamping) based on the White Rabbit (WR) SPEC node (Simple PCIe FMC carrier), to provide ns-precision time-stamps (TSs) of input signals (e.g., triggers from a connected device) and transmission of these TSs to a central collection point. TiCkS was developed within the specifications of the Cherenkov Telescope Array (CTA) as one of the candidate TS…
▽ More
We have developed the TiCkS board (Time and Clock Stamping) based on the White Rabbit (WR) SPEC node (Simple PCIe FMC carrier), to provide ns-precision time-stamps (TSs) of input signals (e.g., triggers from a connected device) and transmission of these TSs to a central collection point. TiCkS was developed within the specifications of the Cherenkov Telescope Array (CTA) as one of the candidate TS nodes, with a small form-factor allowing its use in any CTA camera. The essence of this development concerns the firmware in its Spartan-6 FPGA (Field-Programmable Gate Array), with the addition of: 1) a ns-precision TDC (Time-to-Digital Convertor) for the TSs; and 2) a UDP stack (User Datagram Protocol) to send TSs and auxiliary information over the WR fibre, and to receive configuration & slow control commands over the same fibre. It also provides a PPS (Pulse Per Second) and other clock signals to the connected device, from which it can receive auxiliary event-type information over an SPI link (Serial Peripheral Interface). A version of TiCkS with an FMC connector (FPGA Mezzanine Card) will be made available in the WR OpenHardware repository, so allowing the use of a mezzanine card with varied formats of input/output connectors, providing a cheap, flexible, and reliable solution for ns-precision time-stamping of trigger signals up to 400 kHz, for use in other experiments.
△ Less
Submitted 19 October, 2017;
originally announced October 2017.
-
Cherenkov Telescope Array Contributions to the 35th International Cosmic Ray Conference (ICRC2017)
Authors:
F. Acero,
B. S. Acharya,
V. Acín Portella,
C. Adams,
I. Agudo,
F. Aharonian,
I. Al Samarai,
A. Alberdi,
M. Alcubierre,
R. Alfaro,
J. Alfaro,
C. Alispach,
R. Aloisio,
R. Alves Batista,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
M. Anduze,
E. O. Angüner,
E. Antolini,
L. A. Antonelli,
V. Antonuccio
, et al. (1117 additional authors not shown)
Abstract:
List of contributions from the Cherenkov Telescope Array Consortium presented at the 35th International Cosmic Ray Conference, July 12-20 2017, Busan, Korea.
List of contributions from the Cherenkov Telescope Array Consortium presented at the 35th International Cosmic Ray Conference, July 12-20 2017, Busan, Korea.
△ Less
Submitted 24 October, 2017; v1 submitted 11 September, 2017;
originally announced September 2017.
-
Visualizing the Consequences of Evidence in Bayesian Networks
Authors:
Clifford Champion,
Charles Elkan
Abstract:
This paper addresses the challenge of viewing and navigating Bayesian networks as their structural size and complexity grow. Starting with a review of the state of the art of visualizing Bayesian networks, an area which has largely been passed over, we improve upon existing visualizations in three ways. First, we apply a disciplined approach to the graphic design of the basic elements of the Bayes…
▽ More
This paper addresses the challenge of viewing and navigating Bayesian networks as their structural size and complexity grow. Starting with a review of the state of the art of visualizing Bayesian networks, an area which has largely been passed over, we improve upon existing visualizations in three ways. First, we apply a disciplined approach to the graphic design of the basic elements of the Bayesian network. Second, we propose a technique for direct, visual comparison of posterior distributions resulting from alternative evidence sets. Third, we leverage a central mathematical tool in information theory, to assist the user in finding variables of interest in the network, and to reduce visual complexity where unimportant. We present our methods applied to two modestly large Bayesian networks constructed from real-world data sets. Results suggest the new techniques can be a useful tool for discovering information flow phenomena, and also for qualitative comparisons of different evidence configurations, especially in large probabilistic networks.
△ Less
Submitted 3 July, 2017;
originally announced July 2017.
-
Intrinsic limits on resolutions in muon- and electron-neutrino charged-current events in the KM3NeT/ORCA detector
Authors:
S. Adrián-Martínez,
M. Ageron,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
M. Andre,
G. Androulakis,
M. Anghinolfi,
G. Anton,
M. Ardid,
T. Avgitas,
G. Barbarino,
E. Barbarito,
B. Baret,
J. Barrios-Martí,
A. Belias,
E. Berbee,
A. van den Berg,
V. Bertin,
S. Beurthey,
V. van Beveren,
N. Beverini,
S. Biagi,
A. Biagioni
, et al. (228 additional authors not shown)
Abstract:
Studying atmospheric neutrino oscillations in the few-GeV range with a multimegaton detector promises to determine the neutrino mass hierarchy. This is the main science goal pursued by the future KM3NeT/ORCA water Cherenkov detector in the Mediterranean Sea. In this paper, the processes that limit the obtainable resolution in both energy and direction in charged-current neutrino events in the ORCA…
▽ More
Studying atmospheric neutrino oscillations in the few-GeV range with a multimegaton detector promises to determine the neutrino mass hierarchy. This is the main science goal pursued by the future KM3NeT/ORCA water Cherenkov detector in the Mediterranean Sea. In this paper, the processes that limit the obtainable resolution in both energy and direction in charged-current neutrino events in the ORCA detector are investigated. These processes include the composition of the hadronic fragmentation products, the subsequent particle propagation and the photon-sampling fraction of the detector. GEANT simulations of neutrino interactions in seawater produced by GENIE are used to study the effects in the 1 - 20 GeV range. It is found that fluctuations in the hadronic cascade in conjunction with the variation of the inelasticity y are most detrimental to the resolutions. The effect of limited photon sampling in the detector is of significantly less importance. These results will therefore also be applicable to similar detectors/media, such as those in ice.
△ Less
Submitted 19 May, 2017; v1 submitted 29 November, 2016;
originally announced December 2016.
-
Contributions of the Cherenkov Telescope Array (CTA) to the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016)
Authors:
The CTA Consortium,
:,
A. Abchiche,
U. Abeysekara,
Ó. Abril,
F. Acero,
B. S. Acharya,
C. Adams,
G. Agnetta,
F. Aharonian,
A. Akhperjanian,
A. Albert,
M. Alcubierre,
J. Alfaro,
R. Alfaro,
A. J. Allafort,
R. Aloisio,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
M. Anduze,
E. O. Angüner
, et al. (1387 additional authors not shown)
Abstract:
List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
List of contributions from the Cherenkov Telescope Array (CTA) Consortium presented at the 6th International Symposium on High-Energy Gamma-Ray Astronomy (Gamma 2016), July 11-15, 2016, in Heidelberg, Germany.
△ Less
Submitted 17 October, 2016;
originally announced October 2016.
-
Letter of Intent for KM3NeT 2.0
Authors:
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. Anassontzis,
M. Andre,
G. Androulakis,
M. Anghinolfi,
G. Anton,
M. Ardid,
T. Avgitas,
G. Barbarino,
E. Barbarito,
B. Baret,
J. Barrios-Martí,
B. Belhorma,
A. Belias,
E. Berbee,
A. van den Berg,
V. Bertin,
S. Beurthey,
V. van Beveren,
N. Beverini
, et al. (222 additional authors not shown)
Abstract:
The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of elect…
▽ More
The main objectives of the KM3NeT Collaboration are i) the discovery and subsequent observation of high-energy neutrino sources in the Universe and ii) the determination of the mass hierarchy of neutrinos. These objectives are strongly motivated by two recent important discoveries, namely: 1) The high-energy astrophysical neutrino signal reported by IceCube and 2) the sizable contribution of electron neutrinos to the third neutrino mass eigenstate as reported by Daya Bay, Reno and others. To meet these objectives, the KM3NeT Collaboration plans to build a new Research Infrastructure consisting of a network of deep-sea neutrino telescopes in the Mediterranean Sea. A phased and distributed implementation is pursued which maximises the access to regional funds, the availability of human resources and the synergetic opportunities for the earth and sea sciences community. Three suitable deep-sea sites are identified, namely off-shore Toulon (France), Capo Passero (Italy) and Pylos (Greece). The infrastructure will consist of three so-called building blocks. A building block comprises 115 strings, each string comprises 18 optical modules and each optical module comprises 31 photo-multiplier tubes. Each building block thus constitutes a 3-dimensional array of photo sensors that can be used to detect the Cherenkov light produced by relativistic particles emerging from neutrino interactions. Two building blocks will be configured to fully explore the IceCube signal with different methodology, improved resolution and complementary field of view, including the Galactic plane. One building block will be configured to precisely measure atmospheric neutrino oscillations.
△ Less
Submitted 26 July, 2016; v1 submitted 27 January, 2016;
originally announced January 2016.
-
The prototype detection unit of the KM3NeT detector
Authors:
KM3NeT Collaboration,
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
G. C. Androulakis,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
T. Avgitas,
K. Balasi,
H. Band,
G. Barbarino,
E. Barbarito,
F. Barbato,
B. Baret,
S. Baron,
J. Barrios,
A. Belias,
E. Berbee,
A. M. van den Berg
, et al. (224 additional authors not shown)
Abstract:
A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitt…
▽ More
A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitted by charged secondary particles emerging from neutrino interactions. This prototype string implements three optical modules with 31 photomultiplier tubes each. These optical modules were developed by the KM3NeT Collaboration to enhance the detection capability of neutrino interactions. The prototype detection unit was operated since its deployment in May 2014 until its decommissioning in July 2015. Reconstruction of the particle trajectories from the data requires a nanosecond accuracy in the time calibration. A procedure for relative time calibration of the photomultiplier tubes contained in each optical module is described. This procedure is based on the measured coincidences produced in the sea by the 40K background light and can easily be expanded to a detector with several thousands of optical modules. The time offsets between the different optical modules are obtained using LED nanobeacons mounted inside them. A set of data corresponding to 600 hours of livetime was analysed. The results show good agreement with Monte Carlo simulations of the expected optical background and the signal from atmospheric muons. An almost background-free sample of muons was selected by filtering the time correlated signals on all the three optical modules. The zenith angle of the selected muons was reconstructed with a precision of about 3°.
△ Less
Submitted 23 December, 2015; v1 submitted 6 October, 2015;
originally announced October 2015.
-
Status and Plans for the Array Control and Data Acquisition System of the Cherenkov Telescope Array
Authors:
I. Oya,
M. Fuessling,
U. Schwanke,
P. Wegner,
A. Balzer,
D. Berge,
J. Borkowski,
J. Camprecios,
S. Colonges,
J. Colome,
C. Champion,
V. Conforti,
F. Gianotti,
T. Le Flour,
R. Lindemann,
E. Lyard,
M. Mayer,
D. Melkumyan,
M. Punch,
C. Tanci,
T. Schmidt,
J. Schwarz,
G. Tosti,
K. Verma,
A. Weinstein
, et al. (2 additional authors not shown)
Abstract:
The Cherenkov Telescope Array (CTA) is the next-generation atmospheric Cherenkov gamma-ray observatory. CTA will consist of two installations, one in the northern, and the other in the southern hemisphere, containing tens of telescopes of different sizes. The CTA performance requirements and the inherent complexity associated with the operation, control and monitoring of such a large distributed m…
▽ More
The Cherenkov Telescope Array (CTA) is the next-generation atmospheric Cherenkov gamma-ray observatory. CTA will consist of two installations, one in the northern, and the other in the southern hemisphere, containing tens of telescopes of different sizes. The CTA performance requirements and the inherent complexity associated with the operation, control and monitoring of such a large distributed multi-telescope array leads to new challenges in the field of the gamma-ray astronomy. The ACTL (array control and data acquisition) system will consist of the hardware and software that is necessary to control and monitor the CTA arrays, as well as to time-stamp, read-out, filter and store -at aggregated rates of few GB/s- the scientific data. The ACTL system must be flexible enough to permit the simultaneous automatic operation of multiple sub-arrays of telescopes with a minimum personnel effort on site. One of the challenges of the system is to provide a reliable integration of the control of a large and heterogeneous set of devices. Moreover, the system is required to be ready to adapt the observation schedule, on timescales of a few tens of seconds, to account for changing environmental conditions or to prioritize incoming scientific alerts from time-critical transient phenomena such as gamma ray bursts. This contribution provides a summary of the main design choices and plans for building the ACTL system.
△ Less
Submitted 3 September, 2015;
originally announced September 2015.
-
NectarCAM : a camera for the medium size telescopes of the Cherenkov Telescope Array
Authors:
J-F. Glicenstein,
O. Abril,
J-A. Barrio,
O. Blanch~Bigas,
J. Bolmont,
F. Bouyjou,
P. Brun,
E. Chabanne,
C. Champion,
S. Colonges,
P. Corona,
E. Delagnes,
C. Delgado,
C. Diaz Ginzov,
D. Durand,
J-P. Ernenwein,
S. Fegan,
O. Ferreira,
M. Fesquet,
A. Fiasson,
G. Fontaine,
N. Fouque,
D. Gascon,
B. Giebels,
F. Henault
, et al. (41 additional authors not shown)
Abstract:
NectarCAM is a camera proposed for the medium-sized telescopes of the Cherenkov Telescope Array (CTA) covering the central energy range of ~100 GeV to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the heart of which is a GHz sampling Switched Capacitor Array and a 12-bit Analog to Digital converter. The camera will be equipped with 265 7-photomultiplier modules, covering a f…
▽ More
NectarCAM is a camera proposed for the medium-sized telescopes of the Cherenkov Telescope Array (CTA) covering the central energy range of ~100 GeV to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the heart of which is a GHz sampling Switched Capacitor Array and a 12-bit Analog to Digital converter. The camera will be equipped with 265 7-photomultiplier modules, covering a field of view of 8 degrees. Each module includes the photomultiplier bases, high voltage supply, pre-amplifier, trigger, readout and Ethernet transceiver. The recorded events last between a few nanoseconds and tens of nanoseconds. The camera trigger will be flexible so as to minimize the read-out dead-time of the NECTAr chips. NectarCAM is designed to sustain a data rate of more than 4 kHz with less than 5\% dead time. The camera concept, the design and tests of the various subcomponents and results of thermal and electrical prototypes are presented. The design includes the mechanical structure, cooling of the electronics, read-out, clock distribution, slow control, data-acquisition, triggering, monitoring and services.
△ Less
Submitted 26 August, 2015;
originally announced August 2015.
-
CTA Contributions to the 34th International Cosmic Ray Conference (ICRC2015)
Authors:
The CTA Consortium,
:,
A. Abchiche,
U. Abeysekara,
Ó. Abril,
F. Acero,
B. S. Acharya,
M. Actis,
G. Agnetta,
J. A. Aguilar,
F. Aharonian,
A. Akhperjanian,
A. Albert,
M. Alcubierre,
R. Alfaro,
E. Aliu,
A. J. Allafort,
D. Allan,
I. Allekotte,
R. Aloisio,
J. -P. Amans,
E. Amato,
L. Ambrogi,
G. Ambrosi,
M. Ambrosio
, et al. (1290 additional authors not shown)
Abstract:
List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands.
List of contributions from the CTA Consortium presented at the 34th International Cosmic Ray Conference, 30 July - 6 August 2015, The Hague, The Netherlands.
△ Less
Submitted 11 September, 2015; v1 submitted 24 August, 2015;
originally announced August 2015.
-
Deep sea tests of a prototype of the KM3NeT digital optical module
Authors:
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
R. de Asmundis,
K. Balasi,
H. Band,
G. Barbarino,
E. Barbarito,
F. Barbato,
B. Baret,
S. Baron,
A. Belias,
E. Berbee,
A. M. van den Berg,
A. Berkien,
V. Bertin,
S. Beurthey
, et al. (225 additional authors not shown)
Abstract:
The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on th…
▽ More
The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same $^{40}$K decay and the localization bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions.
△ Less
Submitted 16 May, 2014; v1 submitted 5 May, 2014;
originally announced May 2014.
-
The NectarCAM camera project
Authors:
J-F. Glicenstein,
M. Barcelo,
J-A. Barrio,
O. Blanch,
J. Boix,
J. Bolmont,
C. Boutonnet,
S. Cazaux,
E. Chabanne,
C. Champion,
F. Chateau,
S. Colonges,
P. Corona,
S. Couturier,
B. Courty,
E. Delagnes,
C. Delgado,
J-P. Ernenwein,
S. Fegan,
O. Ferreira,
M. Fesquet,
G. Fontaine,
N. Fouque,
F. Henault,
D. Gascón
, et al. (35 additional authors not shown)
Abstract:
In the framework of the next generation of Cherenkov telescopes, the Cherenkov Telescope Array (CTA), NectarCAM is a camera designed for the medium size telescopes covering the central energy range of 100 GeV to 30 TeV. NectarCAM will be finely pixelated (~ 1800 pixels for a 8 degree field of view, FoV) in order to image atmospheric Cherenkov showers by measuring the charge deposited within a few…
▽ More
In the framework of the next generation of Cherenkov telescopes, the Cherenkov Telescope Array (CTA), NectarCAM is a camera designed for the medium size telescopes covering the central energy range of 100 GeV to 30 TeV. NectarCAM will be finely pixelated (~ 1800 pixels for a 8 degree field of view, FoV) in order to image atmospheric Cherenkov showers by measuring the charge deposited within a few nanoseconds time-window. It will have additional features like the capacity to record the full waveform with GHz sampling for every pixel and to measure event times with nanosecond accuracy. An array of a few tens of medium size telescopes, equipped with NectarCAMs, will achieve up to a factor of ten improvement in sensitivity over existing instruments in the energy range of 100 GeV to 10 TeV. The camera is made of roughly 250 independent read-out modules, each composed of seven photo-multipliers, with their associated high voltage base and control, a read-out board and a multi-service backplane board. The read-out boards use NECTAr (New Electronics for the Cherenkov Telescope Array) ASICs which have the dual functionality of analogue memories and Analogue to Digital Converter (ADC). The camera trigger to be used will be flexible so as to minimize the read-out dead-time of the NECTAr chips. We present the camera concept and the design and tests of the various subcomponents. The design includes the mechanical parts, the cooling of the electronics, the readout, the data acquisition, the trigger, the monitoring and services.
△ Less
Submitted 17 July, 2013;
originally announced July 2013.
-
CTA contributions to the 33rd International Cosmic Ray Conference (ICRC2013)
Authors:
The CTA Consortium,
:,
O. Abril,
B. S. Acharya,
M. Actis,
G. Agnetta,
J. A. Aguilar,
F. Aharonian,
M. Ajello,
A. Akhperjanian,
M. Alcubierre,
J. Aleksic,
R. Alfaro,
E. Aliu,
A. J. Allafort,
D. Allan,
I. Allekotte,
R. Aloisio,
E. Amato,
G. Ambrosi,
M. Ambrosio,
J. Anderson,
E. O. Angüner,
L. A. Antonelli,
V. Antonuccio
, et al. (1082 additional authors not shown)
Abstract:
Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
Compilation of CTA contributions to the proceedings of the 33rd International Cosmic Ray Conference (ICRC2013), which took place in 2-9 July, 2013, in Rio de Janeiro, Brazil
△ Less
Submitted 29 July, 2013; v1 submitted 8 July, 2013;
originally announced July 2013.
-
The Geant4-DNA project
Authors:
S. Incerti,
G. Baldacchino,
M. Bernal,
R. Capra,
C. Champion,
Z. Francis,
S. Guatelli,
P. Gueye,
A. Mantero,
B. Mascialino,
P. Moretto,
P. Nieminen,
A. Rosenfeld,
C. Villagrasa,
C. Zacharatou
Abstract:
The Geant4-DNA project proposes to develop an open-source simulation software based and fully included in the general-purpose Geant4 Monte Carlo simulation toolkit. The main objective of this software is to simulate biological damages induced by ionising radiation at the cellular and sub-cellular scale. This project was originally initiated by the European Space Agency for the prediction of dele…
▽ More
The Geant4-DNA project proposes to develop an open-source simulation software based and fully included in the general-purpose Geant4 Monte Carlo simulation toolkit. The main objective of this software is to simulate biological damages induced by ionising radiation at the cellular and sub-cellular scale. This project was originally initiated by the European Space Agency for the prediction of deleterious effects of radiation that may affect astronauts during future long duration space exploration missions. In this paper, the Geant4-DNA collaboration presents an overview of the whole ongoing project, including its most recent developments already available in the last Geant4 public release (9.3 BETA), as well as an illustration example simulating the direct irradiation of a chromatin fibre. Expected extensions involving several research domains, such as particle physics, chemistry and cellular and molecular biology, within a fully interdiciplinary activity of the Geant4 collaboration are also discussed.
△ Less
Submitted 29 October, 2009;
originally announced October 2009.