Showing 1–50 of 76 results for author: Borghi, G

First Linearity and Stability Characterization for CZT Detection System in a e$^+$e$^-$ Collider Environment

Authors: Leonardo Abbene, Francesco Artibani, Manuele Bettelli, Antonino Buttacavoli, Fabio Principato, Andrea Zappettini, Massimiliano Bazzi, Giacomo Borghi, Mario Bragadireanu, Michael Cargnelli, Marco Carminati, Alberto Clozza, Francesco Clozza, Luca De Paolis, Raffaele Del Grande, Kamil Dulski, Laura Fabbietti, Carlo Fiorini, Carlo Guaraldo, Mihail Iliescu, Masahiko Iwasaki, Aleksander Khreptak, Simone Manti, Johann Marton, Pawel Moskal , et al. (18 additional authors not shown)

Abstract: The SIDDHARTA-2 collaboration built a new cadmium-zinc-telluride (CZT, CdZnTe)-based X-ray detection system, used for the first time in the DA$Φ$NE electron-positron collider at INFN-LNF. The aim of this work is to show that these detectors present optimal long- and short-term linearity and stability to perform precise spectroscopic measurements in a collider environment. The spectra used as refer… ▽ More The SIDDHARTA-2 collaboration built a new cadmium-zinc-telluride (CZT, CdZnTe)-based X-ray detection system, used for the first time in the DA$Φ$NE electron-positron collider at INFN-LNF. The aim of this work is to show that these detectors present optimal long- and short-term linearity and stability to perform precise spectroscopic measurements in a collider environment. The spectra used as references for calibration are reported, and the results about the linearity and stability studies are presented. It is also discussed and showed what is the proper function to describe all the effects that alter the Gaussian shape in semiconductors, particularly evident in the CZT case. Good residuals and resolutions were obtained for all the calibrations. In a test run with the source and the collider beam on, it was demonstrated that the calibrations made with beam off are optimal also when the beam is on, and the actual systematics in a physics run were estimated. These promising results show the potentialities of this detector in the high rate environment of a particle collider, and pave the way for the use of CZT detectors in kaonic atoms researches and in accelerators, with applications for particle and nuclear physics. △ Less

Submitted 16 October, 2024; v1 submitted 15 October, 2024; originally announced October 2024.

Comments: 15 pages, 9 figures, 3 tables

Kinetic models for optimization: a unified mathematical framework for metaheuristics

Authors: Giacomo Borghi, Michael Herty, Lorenzo Pareschi

Abstract: Metaheuristic algorithms, widely used for solving complex non-convex and non-differentiable optimization problems, often lack a solid mathematical foundation. In this review, we explore how concepts and methods from kinetic theory can offer a potential unifying framework for a variety of metaheuristic optimization methods. By applying principles from collisional and non-collisional kinetic theory,… ▽ More Metaheuristic algorithms, widely used for solving complex non-convex and non-differentiable optimization problems, often lack a solid mathematical foundation. In this review, we explore how concepts and methods from kinetic theory can offer a potential unifying framework for a variety of metaheuristic optimization methods. By applying principles from collisional and non-collisional kinetic theory, we outline how particle-based algorithms like Simulated Annealing, Genetic Algorithms, Particle Swarm Optimization, and Ensemble Kalman Filter may be described through a common statistical perspective. This approach not only provides a path to deeper theoretical insights and connects different methods under suitable asymptotic scalings, but also enables the derivation of novel algorithms using alternative numerical solvers. While not exhaustive, our review highlights how kinetic models can enhance the mathematical understanding of existing optimization algorithms and inspire new computational strategies. △ Less

Submitted 14 October, 2024; originally announced October 2024.

MSC Class: 65K10; 65C05; 82B40; 82C31; 90C26

Depth-based Privileged Information for Boosting 3D Human Pose Estimation on RGB

Authors: Alessandro Simoni, Francesco Marchetti, Guido Borghi, Federico Becattini, Davide Davoli, Lorenzo Garattoni, Gianpiero Francesca, Lorenzo Seidenari, Roberto Vezzani

Abstract: Despite the recent advances in computer vision research, estimating the 3D human pose from single RGB images remains a challenging task, as multiple 3D poses can correspond to the same 2D projection on the image. In this context, depth data could help to disambiguate the 2D information by providing additional constraints about the distance between objects in the scene and the camera. Unfortunately… ▽ More Despite the recent advances in computer vision research, estimating the 3D human pose from single RGB images remains a challenging task, as multiple 3D poses can correspond to the same 2D projection on the image. In this context, depth data could help to disambiguate the 2D information by providing additional constraints about the distance between objects in the scene and the camera. Unfortunately, the acquisition of accurate depth data is limited to indoor spaces and usually is tied to specific depth technologies and devices, thus limiting generalization capabilities. In this paper, we propose a method able to leverage the benefits of depth information without compromising its broader applicability and adaptability in a predominantly RGB-camera-centric landscape. Our approach consists of a heatmap-based 3D pose estimator that, leveraging the paradigm of Privileged Information, is able to hallucinate depth information from the RGB frames given at inference time. More precisely, depth information is used exclusively during training by enforcing our RGB-based hallucination network to learn similar features to a backbone pre-trained only on depth data. This approach proves to be effective even when dealing with limited and small datasets. Experimental results reveal that the paradigm of Privileged Information significantly enhances the model's performance, enabling efficient extraction of depth information by using only RGB images. △ Less

Submitted 17 September, 2024; originally announced September 2024.

Comments: ECCV 2024 Workshop T-CAP: TOWARDS A COMPLETE ANALYSIS OF PEOPLE: FINE-GRAINED UNDERSTANDING FOR REAL-WORLD APPLICATIONS

A particle consensus approach to solving nonconvex-nonconcave min-max problems

Authors: Giacomo Borghi, Hui Huang, Jinniao Qiu

Abstract: We propose a zero-order optimization method for sequential min-max problems based on two populations of interacting particles. The systems are coupled so that one population aims to solve the inner maximization problem, while the other aims to solve the outer minimization problem. The dynamics are characterized by a consensus-type interaction with additional stochasticity to promote exploration of… ▽ More We propose a zero-order optimization method for sequential min-max problems based on two populations of interacting particles. The systems are coupled so that one population aims to solve the inner maximization problem, while the other aims to solve the outer minimization problem. The dynamics are characterized by a consensus-type interaction with additional stochasticity to promote exploration of the objective landscape. Without relying on convexity or concavity assumptions, we establish theoretical convergence guarantees of the algorithm via a suitable mean-field approximation of the particle systems. Numerical experiments illustrate the validity of the proposed approach. In particular, the algorithm is able to identify a global min-max solution, in contrast to gradient-based methods, which typically converge to possibly suboptimal stationary points. △ Less

Submitted 24 July, 2024; originally announced July 2024.

MSC Class: 65C35; 65K05; 90C56; 35Q90; 35Q83

Dynamics of measure-valued agents in the space of probabilities

Authors: Giacomo Borghi, Michael Herty, Andrey Stavitskiy

Abstract: Motivated by the development of dynamics in probability spaces, we propose a novel multi-agent dynamic of consensus type where each agent is a probability measure. The agents move instantaneously towards a weighted barycenter of the ensemble according to the 2-Wasserstein metric. We mathematically describe the evolution as a system of measure differential inclusions and show the existence of solut… ▽ More Motivated by the development of dynamics in probability spaces, we propose a novel multi-agent dynamic of consensus type where each agent is a probability measure. The agents move instantaneously towards a weighted barycenter of the ensemble according to the 2-Wasserstein metric. We mathematically describe the evolution as a system of measure differential inclusions and show the existence of solutions for compactly supported initial data. Inspired by the consensus-based optimization, we apply the multi-agent system to solve a minimization problem over the space of probability measures. In the small numerical example, each agent is described by a particle approximation and aims to approximate a target measure. △ Less

Submitted 8 July, 2024; originally announced July 2024.

MSC Class: 34G20; 35D30; 49Q22

HERMES: Gamma Ray Burst and Gravitational Wave counterpart hunter

Authors: G. Ghirlanda, L. Nava, O. Salafia, F. Fiore, R. Campana, R. Salvaterra, A. Sanna, W. Leone, Y. Evangelista, G. Dilillo, S. Puccetti, A. Santangelo, M. Trenti, A. Guzmán, P. Hedderman, G. Amelino-Camelia, M. Barbera, G. Baroni, M. Bechini, P. Bellutti, G. Bertuccio, G. Borghi, A. Brandonisio, L. Burderi, C. Cabras , et al. (45 additional authors not shown)

Abstract: Gamma Ray Bursts (GRBs) bridge relativistic astrophysics and multi-messenger astronomy. Space-based gamma/X-ray wide field detectors have proven essential to detect and localize the highly variable GRB prompt emission, which is also a counterpart of gravitational wave events. We study the capabilities to detect long and short GRBs by the High Energy Rapid Modular Ensemble of Satellites (HERMES) Pa… ▽ More Gamma Ray Bursts (GRBs) bridge relativistic astrophysics and multi-messenger astronomy. Space-based gamma/X-ray wide field detectors have proven essential to detect and localize the highly variable GRB prompt emission, which is also a counterpart of gravitational wave events. We study the capabilities to detect long and short GRBs by the High Energy Rapid Modular Ensemble of Satellites (HERMES) Pathfinder (HP) and SpIRIT, namely a swarm of six 3U CubeSats to be launched in early 2025, and a 6U CubeSat launched on December 1st 2023. We also study the capabilities of two advanced configurations of swarms of >8 satellites with improved detector performances (HERMES Constellations). The HERMES detectors, sensitive down to ~2-3 keV, will be able to detect faint/soft GRBs which comprise X-ray flashes and high redshift bursts. By combining state-of-the-art long and short GRB population models with a description of the single module performance, we estimate that HP will detect ~195^{+22}_{-21} long GRBs (3.4^{+0.3}_{-0.8} at redshift z>6) and ~19^{+5}_{-3} short GRBs per year. The larger HERMES Constellations under study can detect between ~1300 and ~3000 long GRBs per year and between ~160 and ~400 short GRBs per year, depending on the chosen configuration, with a rate of long GRBs above z>6 between 30 and 75 per year. Finally, we explore the capabilities of HERMES to detect short GRBs as electromagnetic counterparts of binary neutron star (BNS) mergers detected as gravitational signals by current and future ground-based interferometers. Under the assumption that the GRB jets are structured, we estimate that HP can provide up to 1 (14) yr^{-1} joint detections during the fifth LIGO-Virgo-KAGRA observing run (Einstein Telescope single triangle 10 km arm configuration). These numbers become 4 (100) yr^{-1}, respectively, for the HERMES Constellation configuration. △ Less

Submitted 27 May, 2024; originally announced May 2024.

Comments: 13 pages, 6 figures, 4 tabels. Accepted for publication by Astronomy & Astrophysics

Journal ref: A&A 689, A175 (2024)

ONOT: a High-Quality ICAO-compliant Synthetic Mugshot Dataset

Authors: Nicolò Di Domenico, Guido Borghi, Annalisa Franco, Davide Maltoni

Abstract: Nowadays, state-of-the-art AI-based generative models represent a viable solution to overcome privacy issues and biases in the collection of datasets containing personal information, such as faces. Following this intuition, in this paper we introduce ONOT, a synthetic dataset specifically focused on the generation of high-quality faces in adherence to the requirements of the ISO/IEC 39794-5 standa… ▽ More Nowadays, state-of-the-art AI-based generative models represent a viable solution to overcome privacy issues and biases in the collection of datasets containing personal information, such as faces. Following this intuition, in this paper we introduce ONOT, a synthetic dataset specifically focused on the generation of high-quality faces in adherence to the requirements of the ISO/IEC 39794-5 standards that, following the guidelines of the International Civil Aviation Organization (ICAO), defines the interchange formats of face images in electronic Machine-Readable Travel Documents (eMRTD). The strictly controlled and varied mugshot images included in ONOT are useful in research fields related to the analysis of face images in eMRTD, such as Morphing Attack Detection and Face Quality Assessment. The dataset is publicly released, in combination with the generation procedure details in order to improve the reproducibility and enable future extensions. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Comments: Paper accepted in IEEE FG 2024

Adversarial Identity Injection for Semantic Face Image Synthesis

Authors: Giuseppe Tarollo, Tomaso Fontanini, Claudio Ferrari, Guido Borghi, Andrea Prati

Abstract: Nowadays, deep learning models have reached incredible performance in the task of image generation. Plenty of literature works address the task of face generation and editing, with human and automatic systems that struggle to distinguish what's real from generated. Whereas most systems reached excellent visual generation quality, they still face difficulties in preserving the identity of the start… ▽ More Nowadays, deep learning models have reached incredible performance in the task of image generation. Plenty of literature works address the task of face generation and editing, with human and automatic systems that struggle to distinguish what's real from generated. Whereas most systems reached excellent visual generation quality, they still face difficulties in preserving the identity of the starting input subject. Among all the explored techniques, Semantic Image Synthesis (SIS) methods, whose goal is to generate an image conditioned on a semantic segmentation mask, are the most promising, even though preserving the perceived identity of the input subject is not their main concern. Therefore, in this paper, we investigate the problem of identity preservation in face image generation and present an SIS architecture that exploits a cross-attention mechanism to merge identity, style, and semantic features to generate faces whose identities are as similar as possible to the input ones. Experimental results reveal that the proposed method is not only suitable for preserving the identity but is also effective in the face recognition adversarial attack, i.e. hiding a second identity in the generated faces. △ Less

Submitted 16 April, 2024; originally announced April 2024.

Comments: Paper accepted at CVPR 2024 Biometrics Workshop

Dealing with Subject Similarity in Differential Morphing Attack Detection

Authors: Nicolò Di Domenico, Guido Borghi, Annalisa Franco, Davide Maltoni

Abstract: The advent of morphing attacks has posed significant security concerns for automated Face Recognition systems, raising the pressing need for robust and effective Morphing Attack Detection (MAD) methods able to effectively address this issue. In this paper, we focus on Differential MAD (D-MAD), where a trusted live capture, usually representing the criminal, is compared with the document image to c… ▽ More The advent of morphing attacks has posed significant security concerns for automated Face Recognition systems, raising the pressing need for robust and effective Morphing Attack Detection (MAD) methods able to effectively address this issue. In this paper, we focus on Differential MAD (D-MAD), where a trusted live capture, usually representing the criminal, is compared with the document image to classify it as morphed or bona fide. We show these approaches based on identity features are effective when the morphed image and the live one are sufficiently diverse; unfortunately, the effectiveness is significantly reduced when the same approaches are applied to look-alike subjects or in all those cases when the similarity between the two compared images is high (e.g. comparison between the morphed image and the accomplice). Therefore, in this paper, we propose ACIdA, a modular D-MAD system, consisting of a module for the attempt type classification, and two modules for the identity and artifacts analysis on input images. Successfully addressing this task would allow broadening the D-MAD applications including, for instance, the document enrollment stage, which currently relies entirely on human evaluation, thus limiting the possibility of releasing ID documents with manipulated images, as well as the automated gates to detect both accomplices and criminals. An extensive cross-dataset experimental evaluation conducted on the introduced scenario shows that ACIdA achieves state-of-the-art results, outperforming literature competitors, while maintaining good performance in traditional D-MAD benchmarks. △ Less

Submitted 11 April, 2024; originally announced April 2024.

V-MAD: Video-based Morphing Attack Detection in Operational Scenarios

Authors: Guido Borghi, Annalisa Franco, Nicolò Di Domenico, Matteo Ferrara, Davide Maltoni

Abstract: In response to the rising threat of the face morphing attack, this paper introduces and explores the potential of Video-based Morphing Attack Detection (V-MAD) systems in real-world operational scenarios. While current morphing attack detection methods primarily focus on a single or a pair of images, V-MAD is based on video sequences, exploiting the video streams often acquired by face verificatio… ▽ More In response to the rising threat of the face morphing attack, this paper introduces and explores the potential of Video-based Morphing Attack Detection (V-MAD) systems in real-world operational scenarios. While current morphing attack detection methods primarily focus on a single or a pair of images, V-MAD is based on video sequences, exploiting the video streams often acquired by face verification tools available, for instance, at airport gates. Through this study, we show for the first time the advantages that the availability of multiple probe frames can bring to the morphing attack detection task, especially in scenarios where the quality of probe images is varied and might be affected, for instance, by pose or illumination variations. Experimental results on a real operational database demonstrate that video sequences represent valuable information for increasing the robustness and performance of morphing attack detection systems. △ Less

Submitted 10 April, 2024; originally announced April 2024.

SDFR: Synthetic Data for Face Recognition Competition

Authors: Hatef Otroshi Shahreza, Christophe Ecabert, Anjith George, Alexander Unnervik, Sébastien Marcel, Nicolò Di Domenico, Guido Borghi, Davide Maltoni, Fadi Boutros, Julia Vogel, Naser Damer, Ángela Sánchez-Pérez, EnriqueMas-Candela, Jorge Calvo-Zaragoza, Bernardo Biesseck, Pedro Vidal, Roger Granada, David Menotti, Ivan DeAndres-Tame, Simone Maurizio La Cava, Sara Concas, Pietro Melzi, Ruben Tolosana, Ruben Vera-Rodriguez, Gianpaolo Perelli , et al. (3 additional authors not shown)

Abstract: Large-scale face recognition datasets are collected by crawling the Internet and without individuals' consent, raising legal, ethical, and privacy concerns. With the recent advances in generative models, recently several works proposed generating synthetic face recognition datasets to mitigate concerns in web-crawled face recognition datasets. This paper presents the summary of the Synthetic Data… ▽ More Large-scale face recognition datasets are collected by crawling the Internet and without individuals' consent, raising legal, ethical, and privacy concerns. With the recent advances in generative models, recently several works proposed generating synthetic face recognition datasets to mitigate concerns in web-crawled face recognition datasets. This paper presents the summary of the Synthetic Data for Face Recognition (SDFR) Competition held in conjunction with the 18th IEEE International Conference on Automatic Face and Gesture Recognition (FG 2024) and established to investigate the use of synthetic data for training face recognition models. The SDFR competition was split into two tasks, allowing participants to train face recognition systems using new synthetic datasets and/or existing ones. In the first task, the face recognition backbone was fixed and the dataset size was limited, while the second task provided almost complete freedom on the model backbone, the dataset, and the training pipeline. The submitted models were trained on existing and also new synthetic datasets and used clever methods to improve training with synthetic data. The submissions were evaluated and ranked on a diverse set of seven benchmarking datasets. The paper gives an overview of the submitted face recognition models and reports achieved performance compared to baseline models trained on real and synthetic datasets. Furthermore, the evaluation of submissions is extended to bias assessment across different demography groups. Lastly, an outlook on the current state of the research in training face recognition models using synthetic data is presented, and existing problems as well as potential future directions are also discussed. △ Less

Submitted 9 April, 2024; v1 submitted 6 April, 2024; originally announced April 2024.

Comments: The 18th IEEE International Conference on Automatic Face and Gesture Recognition (FG 2024)

Enabling On-device Continual Learning with Binary Neural Networks

Authors: Lorenzo Vorabbi, Davide Maltoni, Guido Borghi, Stefano Santi

Abstract: On-device learning remains a formidable challenge, especially when dealing with resource-constrained devices that have limited computational capabilities. This challenge is primarily rooted in two key issues: first, the memory available on embedded devices is typically insufficient to accommodate the memory-intensive back-propagation algorithm, which often relies on floating-point precision. Secon… ▽ More On-device learning remains a formidable challenge, especially when dealing with resource-constrained devices that have limited computational capabilities. This challenge is primarily rooted in two key issues: first, the memory available on embedded devices is typically insufficient to accommodate the memory-intensive back-propagation algorithm, which often relies on floating-point precision. Second, the development of learning algorithms on models with extreme quantization levels, such as Binary Neural Networks (BNNs), is critical due to the drastic reduction in bit representation. In this study, we propose a solution that combines recent advancements in the field of Continual Learning (CL) and Binary Neural Networks to enable on-device training while maintaining competitive performance. Specifically, our approach leverages binary latent replay (LR) activations and a novel quantization scheme that significantly reduces the number of bits required for gradient computation. The experimental validation demonstrates a significant accuracy improvement in combination with a noticeable reduction in memory requirement, confirming the suitability of our approach in expanding the practical applications of deep learning in real-world scenarios. △ Less

Submitted 18 January, 2024; originally announced January 2024.

Model predictive control strategies using consensus-based optimization

Authors: Giacomo Borghi, Michael Herty

Abstract: Model predictive control strategies require to solve in an sequential manner, many, possibly non-convex, optimization problems. In this work, we propose an interacting stochastic agent system to solve those problems. The agents evolve in pseudo-time and in parallel to the time-discrete state evolution. The method is suitable for non-convex, non-differentiable objective functions. The convergence p… ▽ More Model predictive control strategies require to solve in an sequential manner, many, possibly non-convex, optimization problems. In this work, we propose an interacting stochastic agent system to solve those problems. The agents evolve in pseudo-time and in parallel to the time-discrete state evolution. The method is suitable for non-convex, non-differentiable objective functions. The convergence properties are investigated through mean-field approximation of the time-discrete system, showing convergence in the case of additive linear control. We validate the proposed strategy by applying it to the control of a stirred-tank reactor non-linear system. △ Less

Submitted 20 December, 2023; originally announced December 2023.

MSC Class: 65K35; 35Q93; 49M37; 49N80; 90C26

SIDDHARTA-2 apparatus for kaonic atoms research on the DA$Φ$NE collider

Authors: F. Sirghi, F. Sgaramella, L. Abbene, C. Amsler, M. Bazzi, G. Borghi, D. Bosnar, M. Bragadireanu, A. Buttacavoli, M. Carminati, M. Cargnelli, A. Clozza, G. Deda, L. De Paolis, R. Del Grande, K. Dulski, L. Fabbietti, C. Fiorini, I. Friščić, C. Guaraldo, M. Iliescu, M. Iwasaki, A. Khreptak, S. Manti, J. Marton , et al. (19 additional authors not shown)

Abstract: SIDDHARTA-2 represents a state-of-the-art experiment designed to perform dedicated measurements of kaonic atoms, which are particular exotic atom configurations composed of a negatively charged kaon and a nucleus. Investigating these atoms provides an exceptional tool to comprehend the strong interactions in the non-perturbative regime involving strangeness. The experiment is installed at the DA… ▽ More SIDDHARTA-2 represents a state-of-the-art experiment designed to perform dedicated measurements of kaonic atoms, which are particular exotic atom configurations composed of a negatively charged kaon and a nucleus. Investigating these atoms provides an exceptional tool to comprehend the strong interactions in the non-perturbative regime involving strangeness. The experiment is installed at the DA$Φ$NE electron-positron collider, of the INFN National Laboratory of Frascati (INFN-LNF) in Italy, aiming to perform the first-ever measurement of the 2p$\rightarrow$1s X-ray transitions in kaonic deuterium, a crucial step towards determining the isospin-dependent antikaon-nucleon scattering lengths. Based on the experience gained with the previous SIDDHARTA experiment, which performed the most precise measurement of the kaonic hydrogen 2p$\rightarrow$1s X-ray transitions, the present apparatus has been upgraded with innovative Silicon Drift Detectors (SDDs), distributed around a cryogenic gaseous target placed in a vacuum chamber at a short distance above the interaction region of the collider. We present a comprehensive description of the SIDDHARTA-2 setup including the optimization of its various components during the commissioning phase of the collider. △ Less

Submitted 6 November, 2023; originally announced November 2023.

Comments: 32 pages, 21 figures

FRCSyn Challenge at WACV 2024:Face Recognition Challenge in the Era of Synthetic Data

Authors: Pietro Melzi, Ruben Tolosana, Ruben Vera-Rodriguez, Minchul Kim, Christian Rathgeb, Xiaoming Liu, Ivan DeAndres-Tame, Aythami Morales, Julian Fierrez, Javier Ortega-Garcia, Weisong Zhao, Xiangyu Zhu, Zheyu Yan, Xiao-Yu Zhang, Jinlin Wu, Zhen Lei, Suvidha Tripathi, Mahak Kothari, Md Haider Zama, Debayan Deb, Bernardo Biesseck, Pedro Vidal, Roger Granada, Guilherme Fickel, Gustavo Führ , et al. (22 additional authors not shown)

Abstract: Despite the widespread adoption of face recognition technology around the world, and its remarkable performance on current benchmarks, there are still several challenges that must be covered in more detail. This paper offers an overview of the Face Recognition Challenge in the Era of Synthetic Data (FRCSyn) organized at WACV 2024. This is the first international challenge aiming to explore the use… ▽ More Despite the widespread adoption of face recognition technology around the world, and its remarkable performance on current benchmarks, there are still several challenges that must be covered in more detail. This paper offers an overview of the Face Recognition Challenge in the Era of Synthetic Data (FRCSyn) organized at WACV 2024. This is the first international challenge aiming to explore the use of synthetic data in face recognition to address existing limitations in the technology. Specifically, the FRCSyn Challenge targets concerns related to data privacy issues, demographic biases, generalization to unseen scenarios, and performance limitations in challenging scenarios, including significant age disparities between enrollment and testing, pose variations, and occlusions. The results achieved in the FRCSyn Challenge, together with the proposed benchmark, contribute significantly to the application of synthetic data to improve face recognition technology. △ Less

Submitted 17 November, 2023; originally announced November 2023.

Comments: 10 pages, 1 figure, WACV 2024 Workshops

CdZnTe detectors tested at the DAΦNE collider for future kaonic atoms measurements

Authors: A. Scordo, L. Abbene, F. Artibani, M. Bazzi, M. Bettelli, D. Bosnar, G. Borghi, M. Bragadireanu, A. Buttacavoli, M. Cargnelli, M. Carminati, A. Clozza, F. Clozza, L. De Paolis, G. Deda, R. Del Grande, L. Fabbietti, C. Fiorini, I. Friščić, C. Guaraldo, M. Iliescu, M. Iwasaki, A. Khreptak, S. Manti, J. Marton , et al. (20 additional authors not shown)

Abstract: The SIDDHARTA-2 collaboration at the INFN Laboratories of Frascati (LNF) aims to perform groundbreaking measurements on kaonic atoms. In parallel and beyond the ongoing kaonic deuterium, presently running on the DA$Φ$NE collider at LNF, we plan to install additional detectors to perform further kaonic atoms' studies, taking advantage of the unique low energy and low momentum spread $K^-$ beam deli… ▽ More The SIDDHARTA-2 collaboration at the INFN Laboratories of Frascati (LNF) aims to perform groundbreaking measurements on kaonic atoms. In parallel and beyond the ongoing kaonic deuterium, presently running on the DA$Φ$NE collider at LNF, we plan to install additional detectors to perform further kaonic atoms' studies, taking advantage of the unique low energy and low momentum spread $K^-$ beam delivered by the at-rest decay of the $φ$ meson. CdZnTe devices are ideal for detecting transitions toward both the upper and lower levels of intermediate-mass kaonic atoms, like kaonic carbon and aluminium, which have an important impact on the strangeness sector of nuclear physics. We present the results obtained in a set of preliminary tests conducted on DA$Φ$NE, in view of measurements foreseen in 2024, with the twofold aim to tune the timing window required to reject the extremely high electromagnetic background, and to quantify the readout electronics saturation effect due to the high rate, when placed close to the Interaction Region (IR). In the first test we used commercial devices and electronics, while for the second one both were customized at the IMEM-CNR of Parma and the University of Palermo. The results confirmed the possibility of finding and matching a proper timing window where to identify the signal events and proved better performances, in terms of energy resolution, of the custom system. In both cases, strong saturation effects were confirmed, accounting for a loss of almost 90\% of the events, which will be overcome by a dedicated shielding structure foreseen for the final experimental setup. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Characterization of iLGADs using soft X-rays

Authors: Antonio Liguori, Rebecca Barten, Filippo Baruffaldi, Anna Bergamaschi, Giacomo Borghi, Maurizio Boscardin, Martin Brückner, Tim Alexander Butcher, Maria Carulla, Matteo Centis Vignali, Roberto Dinapoli, Simon Ebner, Francesco Ficorella, Erik Fröjdh, Dominic Greiffenberg, Omar Hammad Ali, Shqipe Hasanaj, Julian Heymes, Viktoria Hinger, Thomas King, Pawel Kozlowski, Carlos Lopez-Cuenca, Davide Mezza, Konstantinos Moustakas, Aldo Mozzanica , et al. (9 additional authors not shown)

Abstract: Experiments at synchrotron radiation sources and X-ray Free-Electron Lasers in the soft X-ray energy range ($250$eV--$2$keV) stand to benefit from the adaptation of the hybrid silicon detector technology for low energy photons. Inverse Low Gain Avalanche Diode (iLGAD) sensors provide an internal gain, enhancing the signal-to-noise ratio and allowing single photon detection below $1$keV using hybri… ▽ More Experiments at synchrotron radiation sources and X-ray Free-Electron Lasers in the soft X-ray energy range ($250$eV--$2$keV) stand to benefit from the adaptation of the hybrid silicon detector technology for low energy photons. Inverse Low Gain Avalanche Diode (iLGAD) sensors provide an internal gain, enhancing the signal-to-noise ratio and allowing single photon detection below $1$keV using hybrid detectors. In addition, an optimization of the entrance window of these sensors enhances their quantum efficiency (QE). In this work, the QE and the gain of a batch of different iLGAD diodes with optimized entrance windows were characterized using soft X-rays at the Surface/Interface:Microscopy beamline of the Swiss Light Source synchrotron. Above $250$eV, the QE is larger than $55\%$ for all sensor variations, while the charge collection efficiency is close to $100\%$. The average gain depends on the gain layer design of the iLGADs and increases with photon energy. A fitting procedure is introduced to extract the multiplication factor as a function of the absorption depth of X-ray photons inside the sensors. In particular, the multiplication factors for electron- and hole-triggered avalanches are estimated, corresponding to photon absorption beyond or before the gain layer, respectively. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: 16 pages, 8 figures

Journal ref: Journal of Instrumentation 18, P12006 (2023)

Kinetic description and convergence analysis of genetic algorithms for global optimization

Authors: Giacomo Borghi, Lorenzo Pareschi

Abstract: Genetic Algorithms (GA) are a class of metaheuristic global optimization methods inspired by the process of natural selection among individuals in a population. Despite their widespread use, a comprehensive theoretical analysis of these methods remains challenging due to the complexity of the heuristic mechanisms involved. In this work, relying on the tools of statistical physics, we take a first… ▽ More Genetic Algorithms (GA) are a class of metaheuristic global optimization methods inspired by the process of natural selection among individuals in a population. Despite their widespread use, a comprehensive theoretical analysis of these methods remains challenging due to the complexity of the heuristic mechanisms involved. In this work, relying on the tools of statistical physics, we take a first step towards a mathematical understanding of GA by showing how their behavior for a large number of individuals can be approximated through a time-discrete kinetic model. This allows us to prove the convergence of the algorithm towards a global minimum under mild assumptions on the objective function for a popular choice of selection mechanism. Furthermore, we derive a time-continuous model of GA, represented by a Boltzmann-like partial differential equation, and establish relations with other kinetic and mean-field dynamics in optimization. Numerical experiments support the validity of the proposed kinetic approximation and investigate the asymptotic configurations of the GA particle system for different selection mechanisms and benchmark problems. △ Less

Submitted 12 October, 2023; originally announced October 2023.

MSC Class: 65C35; 90C26; 90C59; 35Q90; 35Q20

3D Pose Nowcasting: Forecast the Future to Improve the Present

Authors: Alessandro Simoni, Francesco Marchetti, Guido Borghi, Federico Becattini, Lorenzo Seidenari, Roberto Vezzani, Alberto Del Bimbo

Abstract: Technologies to enable safe and effective collaboration and coexistence between humans and robots have gained significant importance in the last few years. A critical component useful for realizing this collaborative paradigm is the understanding of human and robot 3D poses using non-invasive systems. Therefore, in this paper, we propose a novel vision-based system leveraging depth data to accurat… ▽ More Technologies to enable safe and effective collaboration and coexistence between humans and robots have gained significant importance in the last few years. A critical component useful for realizing this collaborative paradigm is the understanding of human and robot 3D poses using non-invasive systems. Therefore, in this paper, we propose a novel vision-based system leveraging depth data to accurately establish the 3D locations of skeleton joints. Specifically, we introduce the concept of Pose Nowcasting, denoting the capability of the proposed system to enhance its current pose estimation accuracy by jointly learning to forecast future poses. The experimental evaluation is conducted on two different datasets, providing accurate and real-time performance and confirming the validity of the proposed method on both the robotic and human scenarios. △ Less

Submitted 18 November, 2023; v1 submitted 24 August, 2023; originally announced August 2023.

Detecting Morphing Attacks via Continual Incremental Training

Authors: Lorenzo Pellegrini, Guido Borghi, Annalisa Franco, Davide Maltoni

Abstract: Scenarios in which restrictions in data transfer and storage limit the possibility to compose a single dataset -- also exploiting different data sources -- to perform a batch-based training procedure, make the development of robust models particularly challenging. We hypothesize that the recent Continual Learning (CL) paradigm may represent an effective solution to enable incremental training, eve… ▽ More Scenarios in which restrictions in data transfer and storage limit the possibility to compose a single dataset -- also exploiting different data sources -- to perform a batch-based training procedure, make the development of robust models particularly challenging. We hypothesize that the recent Continual Learning (CL) paradigm may represent an effective solution to enable incremental training, even through multiple sites. Indeed, a basic assumption of CL is that once a model has been trained, old data can no longer be used in successive training iterations and in principle can be deleted. Therefore, in this paper, we investigate the performance of different Continual Learning methods in this scenario, simulating a learning model that is updated every time a new chunk of data, even of variable size, is available. Experimental results reveal that a particular CL method, namely Learning without Forgetting (LwF), is one of the best-performing algorithms. Then, we investigate its usage and parametrization in Morphing Attack Detection and Object Classification tasks, specifically with respect to the amount of new training data that became available. △ Less

Submitted 27 July, 2023; originally announced July 2023.

Comments: Paper accepted in IJCB 2023 conference

koopmans: an open-source package for accurately and efficiently predicting spectral properties with Koopmans functionals

Authors: Edward Linscott, Nicola Colonna, Riccardo De Gennaro, Ngoc Linh Nguyen, Giovanni Borghi, Andrea Ferretti, Ismaila Dabo, Nicola Marzari

Abstract: Over the past decade we have developed Koopmans functionals, a computationally efficient approach for predicting spectral properties with an orbital-density-dependent functional framework. These functionals impose a generalized piecewise linearity condition to the entire electronic manifold, ensuring that orbital energies match the corresponding electron removal/addition energy differences (in con… ▽ More Over the past decade we have developed Koopmans functionals, a computationally efficient approach for predicting spectral properties with an orbital-density-dependent functional framework. These functionals impose a generalized piecewise linearity condition to the entire electronic manifold, ensuring that orbital energies match the corresponding electron removal/addition energy differences (in contrast to semi-local DFT, where a mismatch between the two lies at the heart of the band gap problem and, more generally, the unreliability of Kohn-Sham orbital energies). This strategy has proven to be very powerful, yielding molecular orbital energies and solid-state band structures with comparable accuracy to many-body perturbation theory but at greatly reduced computational cost while preserving a functional formulation. This paper reviews the theory of Koopmans functionals, discusses the algorithms necessary for their implementation, and introduces koopmans, an open-source package that contains all of the code and workflows needed to perform Koopmans functional calculations and obtain reliable spectral properties of molecules and materials. △ Less

Submitted 7 August, 2023; v1 submitted 15 February, 2023; originally announced February 2023.

Comments: 73 pages, 4 figures, 3 tables. Document includes supporting information

Consensus based optimization with memory effects: random selection and applications

Authors: Giacomo Borghi, Sara Grassi, Lorenzo Pareschi

Abstract: In this work we extend the class of Consensus-Based Optimization (CBO) metaheuristic methods by considering memory effects and a random selection strategy. The proposed algorithm iteratively updates a population of particles according to a consensus dynamics inspired by social interactions among individuals. The consensus point is computed taking into account the past positions of all particles. W… ▽ More In this work we extend the class of Consensus-Based Optimization (CBO) metaheuristic methods by considering memory effects and a random selection strategy. The proposed algorithm iteratively updates a population of particles according to a consensus dynamics inspired by social interactions among individuals. The consensus point is computed taking into account the past positions of all particles. While sharing features with the popular Particle Swarm Optimization (PSO) method, the exploratory behavior is fundamentally different and allows better control over the convergence of the particle system. We discuss some implementation aspects which lead to an increased efficiency while preserving the success rate in the optimization process. In particular, we show how employing a random selection strategy to discard particles during the computation improves the overall performance. Several benchmark problems and applications to image segmentation and Neural Networks training are used to validate and test the proposed method. A theoretical analysis allows to recover convergence guarantees under mild assumptions on the objective function. This is done by first approximating the particles evolution with a continuous-in-time dynamics, and then by taking the mean-field limit of such dynamics. Convergence to a global minimizer is finally proved at the mean-field level. △ Less

Submitted 19 March, 2023; v1 submitted 30 January, 2023; originally announced January 2023.

On the challenges to learn from Natural Data Streams

Authors: Guido Borghi, Gabriele Graffieti, Davide Maltoni

Abstract: In real-world contexts, sometimes data are available in form of Natural Data Streams, i.e. data characterized by a streaming nature, unbalanced distribution, data drift over a long time frame and strong correlation of samples in short time ranges. Moreover, a clear separation between the traditional training and deployment phases is usually lacking. This data organization and fruition represents a… ▽ More In real-world contexts, sometimes data are available in form of Natural Data Streams, i.e. data characterized by a streaming nature, unbalanced distribution, data drift over a long time frame and strong correlation of samples in short time ranges. Moreover, a clear separation between the traditional training and deployment phases is usually lacking. This data organization and fruition represents an interesting and challenging scenario for both traditional Machine and Deep Learning algorithms and incremental learning agents, i.e. agents that have the ability to incrementally improve their knowledge through the past experience. In this paper, we investigate the classification performance of a variety of algorithms that belong to various research field, i.e. Continual, Streaming and Online Learning, that receives as training input Natural Data Streams. The experimental validation is carried out on three different datasets, expressly organized to replicate this challenging setting. △ Less

Submitted 9 January, 2023; originally announced January 2023.

High-Precision 4D Tracking with Large Pixels using Thin Resistive Silicon Detectors

Authors: R. Arcidiacono, G. Borghi, M. Boscardin, N. Cartiglia, M. Centis Vignali, M. Costa, G-F. Dalla Betta, M. Ferrero, F. Ficorella, G. Gioachin, L. Lanteri, M. Mandurrino, L. Menzio, R. Mulargia, L. Pancheri, G. Paternoster, A. Rojas, H-F W. Sadrozinski, A. Seiden, F. Siviero, V. Sola, M. Tornago

Abstract: The basic principle of operation of silicon sensors with resistive read-out is built-in charge sharing. Resistive Silicon Detectors (RSD, also known as AC-LGAD), exploiting the signals seen on the electrodes surrounding the impact point, achieve excellent space and time resolutions even with very large pixels. In this paper, a TCT system using a 1064 nm picosecond laser is used to characterize sen… ▽ More The basic principle of operation of silicon sensors with resistive read-out is built-in charge sharing. Resistive Silicon Detectors (RSD, also known as AC-LGAD), exploiting the signals seen on the electrodes surrounding the impact point, achieve excellent space and time resolutions even with very large pixels. In this paper, a TCT system using a 1064 nm picosecond laser is used to characterize sensors from the second RSD production at the Fondazione Bruno Kessler. The paper first introduces the parametrization of the errors in the determination of the position and time coordinates in RSD, then outlines the reconstruction method, and finally presents the results. Three different pixel sizes are used in the analysis: 200 x 340, 450 x 450, and 1300 x 1300 microns^2. At gain = 30, the 450 x 450 microns^2 pixel achieves a time jitter of 20 ps and a spatial resolution of 15 microns concurrently, while the 1300 x 1300 microns^2 pixel achieves 30 ps and 30 micron, respectively. The implementation of cross-shaped electrodes improves considerably the response uniformity over the pixel surface. △ Less

Submitted 24 November, 2022; originally announced November 2022.

Comments: 28 pages, 23 figures submitted to NIMA

Repulsion dynamics for uniform Pareto front approximation in multi-objective optimization problems

Authors: Giacomo Borghi

Abstract: Scalarization allows to solve a multi-objective optimization problem by solving many single-objective sub-problems, uniquely determined by some parameters. In this work, we propose several adaptive strategies to select such parameters in order to obtain a uniform approximation of the Pareto front. This is done by introducing a heuristic dynamics where the parameters interact through a binary repul… ▽ More Scalarization allows to solve a multi-objective optimization problem by solving many single-objective sub-problems, uniquely determined by some parameters. In this work, we propose several adaptive strategies to select such parameters in order to obtain a uniform approximation of the Pareto front. This is done by introducing a heuristic dynamics where the parameters interact through a binary repulsive potential. The approach aims to minimize the associated energy potential which is used to quantify the diversity of the computed solutions. A stochastic component is also added to overcome non-optimal energy configurations. Numerical experiments show the validity of the proposed approach for bi- and tri-objectives problems with different Pareto front geometries. △ Less

Submitted 7 November, 2022; originally announced November 2022.

MSC Class: 90C29; 90C59; 90C26; 68T05

Development of LGAD sensors with a thin entrance window for soft X-ray detection

Authors: Jiaguo Zhang, Rebecca Barten, Filippo Baruffaldi, Anna Bergamaschi, Giacomo Borghi, Maurizio Boscardin, Martin Brueckner, Maria Carulla, Matteo Centis Vignali, Roberto Dinapoli, Simon Ebner, Francesco Ficorella, Erik Froejdh, Dominic Greiffenberg, Omar Hammad Ali, Julian Heymes, Shqipe Hasanaj, Viktoria Hinger, Thomas King, Pawel Kozlowski, Carlos Lopez-Cuenca, Davide Mezza, Konstantinos Moustakas, Aldo Mozzanica, Giovanni Paternoster , et al. (4 additional authors not shown)

Abstract: We show the developments carried out to improve the silicon sensor technology for the detection of soft X-rays with hybrid X-ray detectors. An optimization of the entrance window technology is required to improve the quantum efficiency. The LGAD technology can be used to amplify the signal generated by the X-rays and to increase the signal-to-noise ratio, making single photon resolution in the sof… ▽ More We show the developments carried out to improve the silicon sensor technology for the detection of soft X-rays with hybrid X-ray detectors. An optimization of the entrance window technology is required to improve the quantum efficiency. The LGAD technology can be used to amplify the signal generated by the X-rays and to increase the signal-to-noise ratio, making single photon resolution in the soft X-ray energy range possible. In this paper, we report first results obtained from an LGAD sensor production with an optimized thin entrance window. Single photon detection of soft X-rays down to 452~eV has been demonstrated from measurements, with a signal-to-noise ratio better than 20. △ Less

Submitted 24 October, 2022; originally announced October 2022.

Comments: 10 pages, 6 figures

A Compensated Design of the LGAD Gain Layer

Authors: Valentina Sola, Roberta Arcidiacono, Patrick Asenov, Giacomo Borghi, Maurizio Boscardin, Nicolò Cartiglia, Matteo Centis Vignali, Tommaso Croci, Marco Ferrero, Alessandro Fondacci, Giulia Gioachin, Simona Giordanengo, Leonardo Lantieri, Marco Mandurrino, Luca Menzio, Vincenzo Monaco, Arianna Morozzi, Francesco Moscatelli, Daniele Passeri, Nadia Pastrone, Giovanni Paternoster, Federico Siviero, Amedeo Staiano, Marta Tornago

Abstract: In this contribution, we present an innovative design of the Low-Gain Avalanche Diode (LGAD) gain layer, the p$^+$ implant responsible for the local and controlled signal multiplication. In the standard LGAD design, the gain layer is obtained by implanting $\sim$ 5E16/cm$^3$ atoms of an acceptor material, typically Boron or Gallium, in the region below the n$^{++}$ electrode. In our design, we aim… ▽ More In this contribution, we present an innovative design of the Low-Gain Avalanche Diode (LGAD) gain layer, the p$^+$ implant responsible for the local and controlled signal multiplication. In the standard LGAD design, the gain layer is obtained by implanting $\sim$ 5E16/cm$^3$ atoms of an acceptor material, typically Boron or Gallium, in the region below the n$^{++}$ electrode. In our design, we aim at designing a gain layer resulting from the overlap of a p$^+$ and an n$^+$ implants: the difference between acceptor and donor doping will result in an effective concentration of about 5E16/cm$^3$, similar to standard LGADs. At present, the gain mechanism of LGAD sensors under irradiation is maintained up to a fluence of $\sim$ 1-2E15/cm$^2$, and then it is lost due to the acceptor removal mechanism. The new design will be more resilient to radiation, as both acceptor and donor atoms will undergo removal with irradiation, but their difference will maintain constant. The compensated design will empower the 4D tracking ability typical of the LGAD sensors well above 1E16/cm$^2$. △ Less

Submitted 1 September, 2022; originally announced September 2022.

Comments: Keywords: Silicon sensor, LGAD, Compensation, Compensated LGAD, Gain layer, 4D tracking, Radiation hardness

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Volume 1040, 2022, 167232

Beam test results of 25 $μ$m and 35 $μ$m thick FBK UFSD]{Beam test results of 25 $μ$m and 35 $μ$m thick FBK ultra fast silicon detectors

Authors: F. Carnesecchi, S. Strazzi, A. Alici, R. Arcidiacono, G. Borghi, M. Boscardin, N. Cartiglia, M. Centis Vignali, D. Cavazza, G. -F. Dalla Betta, S. Durando, M. Ferrero, F. Ficorella, O. Hammad Ali, M. Mandurrino, A. Margotti, L. Menzio, R. Nania, L. Pancheri, G. Paternoster, G. Scioli, F. Siviero, V. Sola, M. Tornago, G. Vignola

Abstract: This paper presents the measurements on first very thin Ultra Fast Silicon Detectors (UFSDs) produced by Fondazione Bruno Kessler; the data have been collected in a beam test setup at the CERN PS, using beam with a momentum of 12 GeV/c. UFSDs with a nominal thickness of 25 $μ$m and 35 $μ$m and an area of 1 $\times$ 1 $\text{mm}^2$ have been considered, together with an additional HPK 50-$μ$m thick… ▽ More This paper presents the measurements on first very thin Ultra Fast Silicon Detectors (UFSDs) produced by Fondazione Bruno Kessler; the data have been collected in a beam test setup at the CERN PS, using beam with a momentum of 12 GeV/c. UFSDs with a nominal thickness of 25 $μ$m and 35 $μ$m and an area of 1 $\times$ 1 $\text{mm}^2$ have been considered, together with an additional HPK 50-$μ$m thick sensor, taken as reference. Their timing performances have been studied as a function of the applied voltage and gain. A time resolution of about 25 ps and of 22 ps at a voltage of 120 V and 240 V has been obtained for the 25 and 35 $μ$m thick UFSDs, respectively. △ Less

Submitted 11 August, 2022; originally announced August 2022.

An adaptive consensus based method for multi-objective optimization with uniform Pareto front approximation

Authors: Giacomo Borghi, Michael Herty, Lorenzo Pareschi

Abstract: In this work we are interested in stochastic particle methods for multi-objective optimization. The problem is formulated using parametrized, single-objective sub-problems which are solved simultaneously. To this end a consensus based multi-objective optimization method on the search space combined with an additional heuristic strategy to adapt parameters during the computations is proposed. The a… ▽ More In this work we are interested in stochastic particle methods for multi-objective optimization. The problem is formulated using parametrized, single-objective sub-problems which are solved simultaneously. To this end a consensus based multi-objective optimization method on the search space combined with an additional heuristic strategy to adapt parameters during the computations is proposed. The adaptive strategy aims to distribute the particles uniformly over the image space by using energy-based measures to quantify the diversity of the system. The resulting metaheuristic algorithm is mathematically analyzed using a mean-field approximation and convergence guarantees towards optimal points is rigorously proven. In addition, a gradient flow structure in the parameter space for the adaptive method is revealed and analyzed. Several numerical experiments shows the validity of the proposed stochastic particle dynamics and illustrate the theoretical findings. △ Less

Submitted 2 August, 2022; originally announced August 2022.

MSC Class: 35Q70; 35Q84; 35Q93; 90C29; 90C56

SHREC 2022 Track on Online Detection of Heterogeneous Gestures

Authors: Ariel Caputo, Marco Emporio, Andrea Giachetti, Marco Cristani, Guido Borghi, Andrea D'Eusanio, Minh-Quan Le, Hai-Dang Nguyen, Minh-Triet Tran, F. Ambellan, M. Hanik, E. Nava-Yazdani, C. von Tycowicz

Abstract: This paper presents the outcomes of a contest organized to evaluate methods for the online recognition of heterogeneous gestures from sequences of 3D hand poses. The task is the detection of gestures belonging to a dictionary of 16 classes characterized by different pose and motion features. The dataset features continuous sequences of hand tracking data where the gestures are interleaved with non… ▽ More This paper presents the outcomes of a contest organized to evaluate methods for the online recognition of heterogeneous gestures from sequences of 3D hand poses. The task is the detection of gestures belonging to a dictionary of 16 classes characterized by different pose and motion features. The dataset features continuous sequences of hand tracking data where the gestures are interleaved with non-significant motions. The data have been captured using the Hololens 2 finger tracking system in a realistic use-case of mixed reality interaction. The evaluation is based not only on the detection performances but also on the latency and the false positives, making it possible to understand the feasibility of practical interaction tools based on the algorithms proposed. The outcomes of the contest's evaluation demonstrate the necessity of further research to reduce recognition errors, while the computational cost of the algorithms proposed is sufficiently low. △ Less

Submitted 22 July, 2022; v1 submitted 14 July, 2022; originally announced July 2022.

Comments: Accepted on Computer & Graphics journal

MSC Class: 68T10 ACM Class: I.5.2

Semi-Perspective Decoupled Heatmaps for 3D Robot Pose Estimation from Depth Maps

Authors: Alessandro Simoni, Stefano Pini, Guido Borghi, Roberto Vezzani

Abstract: Knowing the exact 3D location of workers and robots in a collaborative environment enables several real applications, such as the detection of unsafe situations or the study of mutual interactions for statistical and social purposes. In this paper, we propose a non-invasive and light-invariant framework based on depth devices and deep neural networks to estimate the 3D pose of robots from an exter… ▽ More Knowing the exact 3D location of workers and robots in a collaborative environment enables several real applications, such as the detection of unsafe situations or the study of mutual interactions for statistical and social purposes. In this paper, we propose a non-invasive and light-invariant framework based on depth devices and deep neural networks to estimate the 3D pose of robots from an external camera. The method can be applied to any robot without requiring hardware access to the internal states. We introduce a novel representation of the predicted pose, namely Semi-Perspective Decoupled Heatmaps (SPDH), to accurately compute 3D joint locations in world coordinates adapting efficient deep networks designed for the 2D Human Pose Estimation. The proposed approach, which takes as input a depth representation based on XYZ coordinates, can be trained on synthetic depth data and applied to real-world settings without the need for domain adaptation techniques. To this end, we present the SimBa dataset, based on both synthetic and real depth images, and use it for the experimental evaluation. Results show that the proposed approach, made of a specific depth map representation and the SPDH, overcomes the current state of the art. △ Less

Submitted 6 July, 2022; originally announced July 2022.

Comments: IROS2022 and IEEE Robotics and Automation Letters (RA-L). Accepted June, 2022

Characterization of timing and spacial resolution of novel TI-LGAD structures before and after irradiation

Authors: Matias Senger, Ashish Bisht, Giacomo Borghi, Maurizio Boscardin, Matteo Centis Vignali, Federico Ficorella, Omar Hammad Ali, Ben Kilminster, Anna Macchiolo, Giovanni Paternoster

Abstract: The characterization of spacial and timing resolution of the novel Trench Isolated LGAD (TI-LGAD) technology is presented. This technology has been developed at FBK with the goal of achieving 4D pixels, where an accurate position resolution is combined in a single device with the precise timing determination for Minimum Ionizing Particles (MIPs). In the TI-LGAD technology, the pixelated LGAD pads… ▽ More The characterization of spacial and timing resolution of the novel Trench Isolated LGAD (TI-LGAD) technology is presented. This technology has been developed at FBK with the goal of achieving 4D pixels, where an accurate position resolution is combined in a single device with the precise timing determination for Minimum Ionizing Particles (MIPs). In the TI-LGAD technology, the pixelated LGAD pads are separated by physical trenches etched in the silicon. This technology can reduce the interpixel dead area, mitigating the fill factor problem. The TI-RD50 production studied in this work is the first one of pixelated TI-LGADs. The characterization was performed using a scanning TCT setup with an infrared laser and a $^{90}$Sr source setup. △ Less

Submitted 19 April, 2022; originally announced April 2022.

DC-coupled resistive silicon detectors for 4-D tracking

Authors: L. Menzio, R. Arcidiacono, G. Borghi, M. Boscardin, N. Cartiglia, M. Centis Vignali, M. Costa, G-F. Dalla Betta, M. Ferrero, F. Ficorella, G. Gioachin, M. Mandurrino, L. Pancheri, G. Paternoster, F. Siviero, V. Sola, M. Tornago

Abstract: In this work, we introduce a new design concept: the DC-Coupled Resistive Silicon Detectors, based on the LGAD technology. This new approach intends to address a few known features of the first generation of AC-Coupled Resistive Silicon Detectors (RSD). Our simulation exploits a fast hybrid approach based on a combination of two packages, Weightfield2 and LTSpice. It demonstrates that the key feat… ▽ More In this work, we introduce a new design concept: the DC-Coupled Resistive Silicon Detectors, based on the LGAD technology. This new approach intends to address a few known features of the first generation of AC-Coupled Resistive Silicon Detectors (RSD). Our simulation exploits a fast hybrid approach based on a combination of two packages, Weightfield2 and LTSpice. It demonstrates that the key features of the RSD design are maintained, yielding excellent timing and spatial resolutions: a few tens of ps and a few microns. In the presentation, we will outline the optimization methodology and the results of the simulation. We will present detailed studies on the effect of changing the ratio between the n+ layer resistivity and the low-resistivity ring and on the achievable temporal and spatial resolution. △ Less

Submitted 14 April, 2022; originally announced April 2022.

A consensus-based algorithm for multi-objective optimization and its mean-field description

Authors: Giacomo Borghi, Michael Herty, Lorenzo Pareschi

Abstract: We present a multi-agent algorithm for multi-objective optimization problems, which extends the class of consensus-based optimization methods and relies on a scalarization strategy. The optimization is achieved by a set of interacting agents exploring the search space and attempting to solve all scalar sub-problems simultaneously. We show that those dynamics are described by a mean-field model, wh… ▽ More We present a multi-agent algorithm for multi-objective optimization problems, which extends the class of consensus-based optimization methods and relies on a scalarization strategy. The optimization is achieved by a set of interacting agents exploring the search space and attempting to solve all scalar sub-problems simultaneously. We show that those dynamics are described by a mean-field model, which is suitable for a theoretical analysis of the algorithm convergence. Numerical results show the validity of the proposed method. △ Less

Submitted 30 March, 2022; originally announced March 2022.

MSC Class: 35Q70; 35Q84; 35Q93; 90C29; 90C56

Optimization of the Gain Layer Design of Ultra-Fast Silicon Detectors

Authors: Federico Siviero, Roberta Arcidiacono, Giacomo Borghi, Maurizio Boscardin, Nicolo Cartiglia, Matteo Centis Vignali, Marco Costa, Gian Franco Dalla Betta, Marco Ferrero, Francesco Ficorella, Giulia Gioachin, Marco Mandurrino, Simone Mazza, Luca Menzio, Lucio Pancheri, Giovanni Paternoster, Hartmut F. W. Sadrozinski, Abraham Seiden, Valentina Sola, Marta Tornago

Abstract: In the past few years, the need of measuring accurately the spatial and temporal coordinates of the particles generated in high-energy physics experiments has spurred a strong R\&D in the field of silicon sensors. Within these research activities, the so-called Ultra-Fast Silicon Detectors (UFSDs), silicon sensors optimized for timing based on the Low-Gain Avalanche Diode (LGAD) design, have been… ▽ More In the past few years, the need of measuring accurately the spatial and temporal coordinates of the particles generated in high-energy physics experiments has spurred a strong R\&D in the field of silicon sensors. Within these research activities, the so-called Ultra-Fast Silicon Detectors (UFSDs), silicon sensors optimized for timing based on the Low-Gain Avalanche Diode (LGAD) design, have been proposed and adopted by the CMS and ATLAS collaborations for their respective timing layers. The defining feature of the Ultra-Fast Silicon Detectors (UFSDs) is the internal multiplication mechanism, determined by the gain layer design. In this paper, the performances of several types of gain layers, measured with a telescope instrumented with a $^{90}$Sr $β$-source, are reported and compared. The measured sensors are produced by Fondazione Bruno Kessler (FBK) and Hamamatsu Photonics (HPK). The sensor yielding the best performance, both when new and irradiated, is an FBK 45\mum-thick sensor with a carbonated deep gain implant, where the carbon and the boron implants are annealed concurrently with a low thermal load. This sensor is able to achieve a time resolution of 40~ps up to a radiation fluence of~\fluence{2.5}{15}, delivering at least 5~fC of charge. △ Less

Submitted 8 March, 2022; v1 submitted 1 December, 2021; originally announced December 2021.

Comments: v3 revised version as requested by Editor

The second production of RSD (AC-LGAD) at FBK

Authors: M. Mandurrino, R. Arcidiacono, A. Bisht, G. Borghi, M. Boscardin, N. Cartiglia, M. Centis Vignali, G. -F. Dalla Betta, M. Ferrero, F. Ficorella, O. Hammad Ali, A. D. Martinez Rojas, L. Menzio, L. Pancheri, G. Paternoster, F. Siviero, V. Sola, M. Tornago

Abstract: In this contribution we describe the second run of RSD (Resistive AC-Coupled Silicon Detectors) designed at INFN Torino and produced by Fondazione Bruno Kessler (FBK), Trento. RSD are n-in-p detectors intended for 4D particle tracking based on the LGAD technology that get rid of any segmentation implant in order to achieve the 100% fill-factor. They are characterized by three key-elements, (i) a c… ▽ More In this contribution we describe the second run of RSD (Resistive AC-Coupled Silicon Detectors) designed at INFN Torino and produced by Fondazione Bruno Kessler (FBK), Trento. RSD are n-in-p detectors intended for 4D particle tracking based on the LGAD technology that get rid of any segmentation implant in order to achieve the 100% fill-factor. They are characterized by three key-elements, (i) a continuous gain implant, (ii) a resistive n-cathode and (iii) a dielectric coupling layer deposited on top, guaranteeing a good spatial reconstruction of the hit position while benefiting from the good timing properties of LGADs. We will start from the very promising results of our RSD1 batch in terms of tracking performances and then we will move to the description of the design of the RSD2 run. In particular, the principles driving the sensor design and the specific AC-electrode layout adopted to optimize the signal confinement will be addressed. △ Less

Submitted 8 June, 2022; v1 submitted 28 November, 2021; originally announced November 2021.

Constrained consensus-based optimization

Authors: Giacomo Borghi, Michael Herty, Lorenzo Pareschi

Abstract: In this work we are interested in the construction of numerical methods for high dimensional constrained nonlinear optimization problems by particle-based gradient-free techniques. A consensus-based optimization (CBO) approach combined with suitable penalization techniques is introduced for this purpose. The method relies on a reformulation of the constrained minimization problem in an unconstrain… ▽ More In this work we are interested in the construction of numerical methods for high dimensional constrained nonlinear optimization problems by particle-based gradient-free techniques. A consensus-based optimization (CBO) approach combined with suitable penalization techniques is introduced for this purpose. The method relies on a reformulation of the constrained minimization problem in an unconstrained problem for a penalty function and extends to the constrained settings the class of CBO methods. Exact penalization is employed and, since the optimal penalty parameter is unknown, an iterative strategy is proposed that successively updates the parameter based on the constrained violation. Using a mean-field description of the the many particle limit of the arising CBO dynamics, we are able to show convergence of the proposed method to the minimum for general nonlinear constrained problems. Properties of the new algorithm are analyzed. Several numerical examples, also in high dimensions, illustrate the theoretical findings and the good performance of the new numerical method. △ Less

Submitted 20 November, 2021; originally announced November 2021.

SHREC 2021: Track on Skeleton-based Hand Gesture Recognition in the Wild

Authors: Ariel Caputo, Andrea Giachetti, Simone Soso, Deborah Pintani, Andrea D'Eusanio, Stefano Pini, Guido Borghi, Alessandro Simoni, Roberto Vezzani, Rita Cucchiara, Andrea Ranieri, Franca Giannini, Katia Lupinetti, Marina Monti, Mehran Maghoumi, Joseph J. LaViola Jr, Minh-Quan Le, Hai-Dang Nguyen, Minh-Triet Tran

Abstract: Gesture recognition is a fundamental tool to enable novel interaction paradigms in a variety of application scenarios like Mixed Reality environments, touchless public kiosks, entertainment systems, and more. Recognition of hand gestures can be nowadays performed directly from the stream of hand skeletons estimated by software provided by low-cost trackers (Ultraleap) and MR headsets (Hololens, Oc… ▽ More Gesture recognition is a fundamental tool to enable novel interaction paradigms in a variety of application scenarios like Mixed Reality environments, touchless public kiosks, entertainment systems, and more. Recognition of hand gestures can be nowadays performed directly from the stream of hand skeletons estimated by software provided by low-cost trackers (Ultraleap) and MR headsets (Hololens, Oculus Quest) or by video processing software modules (e.g. Google Mediapipe). Despite the recent advancements in gesture and action recognition from skeletons, it is unclear how well the current state-of-the-art techniques can perform in a real-world scenario for the recognition of a wide set of heterogeneous gestures, as many benchmarks do not test online recognition and use limited dictionaries. This motivated the proposal of the SHREC 2021: Track on Skeleton-based Hand Gesture Recognition in the Wild. For this contest, we created a novel dataset with heterogeneous gestures featuring different types and duration. These gestures have to be found inside sequences in an online recognition scenario. This paper presents the result of the contest, showing the performances of the techniques proposed by four research groups on the challenging task compared with a simple baseline method. △ Less

Submitted 21 June, 2021; originally announced June 2021.

Comments: 12 pages, to be published on Computers & Graphics

Binary interaction methods for high dimensional global optimization and machine learning

Authors: Alessandro Benfenati, Giacomo Borghi, Lorenzo Pareschi

Abstract: In this work we introduce a new class of gradient-free global optimization methods based on a binary interaction dynamics governed by a Boltzmann type equation. In each interaction the particles act taking into account both the best microscopic binary position and the best macroscopic collective position. In the mean-field limit we show that the resulting Fokker-Planck partial differential equatio… ▽ More In this work we introduce a new class of gradient-free global optimization methods based on a binary interaction dynamics governed by a Boltzmann type equation. In each interaction the particles act taking into account both the best microscopic binary position and the best macroscopic collective position. In the mean-field limit we show that the resulting Fokker-Planck partial differential equations generalize the current class of consensus based optimization (CBO) methods. For the latter methods, convergence to the global minimizer can be shown for a large class of functions. Algorithmic implementations inspired by the well-known direct simulation Monte Carlo methods in kinetic theory are derived and discussed. Several examples on prototype test functions for global optimization are reported including applications to machine learning. △ Less

Submitted 14 March, 2022; v1 submitted 6 May, 2021; originally announced May 2021.

The X/Gamma-ray Imaging Spectrometer (XGIS) on-board THESEUS: design, main characteristics, and concept of operation

Authors: Claudio Labanti, Lorenzo Amati, Filippo Frontera, Sandro Mereghetti, José Luis Gasent-Blesa, Christoph Tenzer, Piotr Orleanski, Irfan Kuvvetli, Riccardo Campana, Fabio Fuschino, Luca Terenzi, Enrico Virgilli, Gianluca Morgante, Mauro Orlandini, Reginald C. Butler, John B. Stephen, Natalia Auricchio, Adriano De Rosa, Vanni Da Ronco, Federico Evangelisti, Michele Melchiorri, Stefano Squerzanti, Mauro Fiorini, Giuseppe Bertuccio, Filippo Mele , et al. (36 additional authors not shown)

Abstract: THESEUS is one of the three missions selected by ESA as fifth medium class mission (M5) candidates in its Cosmic Vision science program, currently under assessment in a phase A study with a planned launch date in 2032. THESEUS is designed to carry on-board two wide and deep sky monitoring instruments for X/gamma-ray transients detection: a wide-field soft X-ray monitor with imaging capability (Sof… ▽ More THESEUS is one of the three missions selected by ESA as fifth medium class mission (M5) candidates in its Cosmic Vision science program, currently under assessment in a phase A study with a planned launch date in 2032. THESEUS is designed to carry on-board two wide and deep sky monitoring instruments for X/gamma-ray transients detection: a wide-field soft X-ray monitor with imaging capability (Soft X-ray Imager, SXI, 0.3 - 5 keV), a hard X-ray, partially-imaging spectroscopic instrument (X and Gamma Imaging Spectrometer, XGIS, 2 keV - 10 MeV), and an optical/near-IR telescope with both imaging and spectroscopic capability (InfraRed Telescope, IRT, 0.7 - 1.8 $μ$m). The spacecraft will be capable of performing fast repointing of the IRT to the error region provided by the monitors, thus allowing it to detect and localize the transient sources down to a few arcsec accuracy, for immediate identification and redshift determination. The prime goal of the XGIS will be to detect transient sources, with monitoring timescales down to milliseconds, both independently of, or following, up SXI detections, and identify the sources performing localisation at < 15 arcmin and characterize them over a broad energy band, thus providing also unique clues to their emission physics. The XGIS system consists of two independent but identical coded mask cameras, arranged to cover 2 steradians . The XGIS will exploit an innovative technology coupling Silicon Drift Detectors (SDD) with crystal scintillator bars and a very low-noise distributed front-end electronics (ORION ASICs), which will produce a position sensitive detection plane, with a large effective area over a huge energy band (from soft X-rays to soft gamma-rays) with timing resolution down to a few $μ$s.Here is presented an overview of the XGIS instrument design, its configuration, and capabilities. △ Less

Submitted 17 February, 2021; originally announced February 2021.

Comments: Proceedings of the SPIE 2020, paper 11444-303

The XGIS instrument on-board THESEUS: the detection plane and on-board electronics

Authors: Fabio Fuschino, Riccardo Campana, Claudio Labanti, Lorenzo Amati, Enrico Virgilli, Luca Terenzi, Pierluigi Bellutti, Giuseppe Bertuccio, Giacomo Borghi, Francesco Ficorella, Massimo Gandola, Marco Grassi, Giovanni La Rosa, Paolo Lorenzi, Piero Malcovati, Filippo Mele, Piotr Orleański, Antonino Picciotto, Alexandre Rachevski, Irina Rashevskaya, Andrea Santangelo, Paolo Sarra, Giuseppe Sottile, Christoph Tenzer, Andrea Vacchi , et al. (10 additional authors not shown)

Abstract: The X and Gamma Imaging Spectrometer instrument on-board the THESEUS mission (selected by ESA in the framework of the Cosmic Vision M5 launch opportunity, currently in phase A) is based on a detection plane composed of several thousands of single active elements. Each element comprises a 4.5x4.5x30 mm 3 CsI(Tl) scintillator bar, optically coupled at both ends to Silicon Drift Detectors (SDDs). The… ▽ More The X and Gamma Imaging Spectrometer instrument on-board the THESEUS mission (selected by ESA in the framework of the Cosmic Vision M5 launch opportunity, currently in phase A) is based on a detection plane composed of several thousands of single active elements. Each element comprises a 4.5x4.5x30 mm 3 CsI(Tl) scintillator bar, optically coupled at both ends to Silicon Drift Detectors (SDDs). The SDDs acts both as photodetectors for the scintillation light and as direct X-ray sensors. In this paper the design of the XGIS detection plane is reviewed, outlining the strategic choices in terms of modularity and redundancy of the system. Results on detector-electronics prototypes are also described. Moreover, the design and development of the low-noise front-end electronics is presented, emphasizing the innovative architectural design based on custom-designed Application-Specific Integrated Circuits (ASICs). △ Less

Submitted 17 February, 2021; originally announced February 2021.

Comments: Proceedings of the SPIE 2020, paper 11444-277

An innovative architecture for a wide band transient monitor on board the HERMES nano-satellite constellation

Authors: F. Fuschino, R. Campana, C. Labanti, Y. Evangelista, F. Fiore, M. Gandola, M. Grassi, F. Mele, F. Ambrosino, F. Ceraudo, E. Demenev, M. Fiorini, G. Morgante, R. Piazzolla, G. Bertuccio, P. Malcovati, P. Bellutti, G. Borghi, G. Dilillo, M. Feroci, F. Ficorella, G. La Rosa, P. Nogara, G. Pauletta, A. Picciotto , et al. (13 additional authors not shown)

Abstract: The HERMES-TP/SP mission, based on a nanosatellite constellation, has very stringent constraints of sensitivity and compactness, and requires an innovative wide energy range instrument. The instrument technology is based on the "siswich" concept, in which custom-designed, low-noise Silicon Drift Detectors are used to simultaneously detect soft X-rays and to readout the optical light produced by th… ▽ More The HERMES-TP/SP mission, based on a nanosatellite constellation, has very stringent constraints of sensitivity and compactness, and requires an innovative wide energy range instrument. The instrument technology is based on the "siswich" concept, in which custom-designed, low-noise Silicon Drift Detectors are used to simultaneously detect soft X-rays and to readout the optical light produced by the interaction of higher energy photons in GAGG:Ce scintillators. To preserve the inherent excellent spectroscopic performances of SDDs, advanced readout electronics is necessary. In this paper, the HERMES detector architecture concept will be described in detail, as well as the specifically developed front-end ASICs (LYRA-FE and LYRA-BE) and integration solutions. The experimental performance of the integrated system composed by scintillator+SDD+LYRA ASIC will be discussed, demonstrating that the requirements of a wide energy range sensitivity, from 2 keV up to 2 MeV, are met in a compact instrument. △ Less

Submitted 8 January, 2021; originally announced January 2021.

Comments: 12 pages, 10 figures. Proceedings of SPIE "Astronomical Telescopes and Instrumentation" 2020

Journal ref: SPIE Proceedings Volume 11444, Space Telescopes and Instrumentation 2020: Ultraviolet to Gamma Ray; 114441S (2020)

Resistive AC-Coupled Silicon Detectors: principles of operation and first results from a combined analysis of beam test and laser data

Authors: M. Tornago, R. Arcidiacono, N. Cartiglia, M. Costa, M. Ferrero, M. Mandurrino, F. Siviero, V. Sola, A. Staiano, A. Apresyan, K. Di Petrillo, R. Heller, S. Los, G. Borghi, M. Boscardin, G-F Dalla Betta, F. Ficorella, L. Pancheri, G. Paternoster, H. Sadrozinski, A. Seiden

Abstract: This paper presents the principles of operation of Resistive AC-Coupled Silicon Detectors (RSDs) and measurements of the temporal and spatial resolutions using a combined analysis of laser and beam test data. RSDs are a new type of n-in-p silicon sensor based on the Low-Gain Avalanche Diode (LGAD) technology, where the $n^+$ implant has been designed to be resistive, and the read-out is obtained v… ▽ More This paper presents the principles of operation of Resistive AC-Coupled Silicon Detectors (RSDs) and measurements of the temporal and spatial resolutions using a combined analysis of laser and beam test data. RSDs are a new type of n-in-p silicon sensor based on the Low-Gain Avalanche Diode (LGAD) technology, where the $n^+$ implant has been designed to be resistive, and the read-out is obtained via AC-coupling. The truly innovative feature of RSD is that the signal generated by an impinging particle is shared isotropically among multiple read-out pads without the need for floating electrodes or an external magnetic field. Careful tuning of the coupling oxide thickness and the $n^+$ doping profile is at the basis of the successful functioning of this device. Several RSD matrices with different pad width-pitch geometries have been extensively tested with a laser setup in the Laboratory for Innovative Silicon Sensors in Torino, while a smaller set of devices have been tested at the Fermilab Test Beam Facility with a 120 GeV/c proton beam. The measured spatial resolution ranges between $2.5\; μm$ for 70-100 pad-pitch geometry and $17\; μm$ with 200-500 matrices, a factor of 10 better than what is achievable in binary read-out ($bin\; size/ \sqrt{12}$). Beam test data show a temporal resolution of $\sim 40\; ps$ for 200-$μm$ pitch devices, in line with the best performances of LGAD sensors at the same gain. △ Less

Submitted 11 February, 2021; v1 submitted 18 July, 2020; originally announced July 2020.

Comments: 34 pages, 33 figures

A novel hybrid microdosimeter for radiation field characterization based on TEPC detector and LGADs tracker: a feasibility study

Authors: M. Missiaggia, E. Pierobon, M. Castelluzzo, A. Perinelli, F. Cordoni, M. Centis Vignali, G. Borghi, V. E. Bellinzona, E. Scifoni, F. Tommasino, V. Monaco, L. Ricci, \\M. Boscardin, C. La Tessa

Abstract: In microdosimetry, lineal energies y are calculated from energy depositions $ε$ inside the microdosimeter divided by the mean chord length, whose value is based on geometrical assumptions on both the detector and the radiation field. This work presents an innovative two-stages hybrid detector (HDM: hybrid detector for microdosimetry) composed by a Tissue Equivalent Proportional Counter (TEPC) and… ▽ More In microdosimetry, lineal energies y are calculated from energy depositions $ε$ inside the microdosimeter divided by the mean chord length, whose value is based on geometrical assumptions on both the detector and the radiation field. This work presents an innovative two-stages hybrid detector (HDM: hybrid detector for microdosimetry) composed by a Tissue Equivalent Proportional Counter (TEPC) and a silicon tracker made of 4 Low Gain Avalanche Diode (LGAD). This design provides a direct measurement of energy deposition in tissue as well as particles tracking with a submillimeter spatial resolution. The data collected by the detector allow to obtain the real track length traversed by each particle in the TEPC and thus estimates microdosimetry spectra without the mean chord length approximation. Using Geant4 toolkit, we investigated HDM performances in terms of detection and tracking efficiencies when placed in water and exposed to protons and carbon ions in the therapeutic energy range. The results indicate that the mean chord length approximation underestimate particles with short track, which often are characterized by a high energy deposition and thus can be biologically relevant. Tracking efficiency depends on the LGAD configurations: 34 strips sensors have a higher detection efficiency but lower spatial resolution than 71 strips sensors. Further studies will be performed both with Geant4 and experimentally to optimize the detector design on the bases of the radiation field of interest. The main purpose of HDM is to improve the assessment of the radiation biological effectiveness via microdosimetric measurements, exploiting a new definition of the lineal energy ($y_{T}$), defined as the energy deposition $ε$ inside the microdosimeter divided by the real track length of the particle. △ Less

Submitted 13 July, 2020; originally announced July 2020.

Silicon Sensors for Future Particle Trackers

Authors: N. Cartiglia, R. Arcidiacono, G. Borghi, M. Boscardin, M. Costa, Z. Galloway, F. Fausti, M. Ferrero, F. Ficorella, M. Mandurrino, S. Mazza, E. J. Olave, G. Paternoster, F. Siviero, H. F-W. Sadrozinski, V. Sola, A. Staiano, A. Seiden, M. Tornago, Y. Zhao

Abstract: Several future high-energy physics facilities are currently being planned. The proposed projects include high energy $e^+ e^-$ circular and linear colliders, hadron colliders and muon colliders, while the Electron-Ion Collider (EIC) has already been approved for construction at the Brookhaven National Laboratory. Each proposal has its own advantages and disadvantages in term of readiness, cost, sc… ▽ More Several future high-energy physics facilities are currently being planned. The proposed projects include high energy $e^+ e^-$ circular and linear colliders, hadron colliders and muon colliders, while the Electron-Ion Collider (EIC) has already been approved for construction at the Brookhaven National Laboratory. Each proposal has its own advantages and disadvantages in term of readiness, cost, schedule and physics reach, and each proposal requires the design and production of specific new detectors. This paper first presents the performances required to the future silicon tracking systems at the various new facilities, and then it illustrates a few possibilities for the realization of such silicon trackers. The challenges posed by the future facilities require a new family of silicon detectors, where features such as impact ionization, radiation damage saturation, charge sharing, and analog readout are exploited to meet these new demands. △ Less

Submitted 31 March, 2020; originally announced March 2020.

Domain Translation with Conditional GANs: from Depth to RGB Face-to-Face

Authors: Matteo Fabbri, Guido Borghi, Fabio Lanzi, Roberto Vezzani, Simone Calderara, Rita Cucchiara

Abstract: Can faces acquired by low-cost depth sensors be useful to catch some characteristic details of the face? Typically the answer is no. However, new deep architectures can generate RGB images from data acquired in a different modality, such as depth data. In this paper, we propose a new \textit{Deterministic Conditional GAN}, trained on annotated RGB-D face datasets, effective for a face-to-face tran… ▽ More Can faces acquired by low-cost depth sensors be useful to catch some characteristic details of the face? Typically the answer is no. However, new deep architectures can generate RGB images from data acquired in a different modality, such as depth data. In this paper, we propose a new \textit{Deterministic Conditional GAN}, trained on annotated RGB-D face datasets, effective for a face-to-face translation from depth to RGB. Although the network cannot reconstruct the exact somatic features for unknown individual faces, it is capable to reconstruct plausible faces; their appearance is accurate enough to be used in many pattern recognition tasks. In fact, we test the network capability to hallucinate with some \textit{Perceptual Probes}, as for instance face aspect classification or landmark detection. Depth face can be used in spite of the correspondent RGB images, that often are not available due to difficult luminance conditions. Experimental results are very promising and are as far as better than previously proposed approaches: this domain translation can constitute a new way to exploit depth data in new future applications. △ Less

Submitted 23 January, 2019; originally announced January 2019.

Comments: Accepted at ICPR 2018

Combining Deep and Depth: Deep Learning and Face Depth Maps for Driver Attention Monitoring

Authors: Guido Borghi

Abstract: Recently, deep learning approaches have achieved promising results in various fields of computer vision. In this paper, we investigate the combination of deep learning based methods and depth maps as input images to tackle the problem of driver attention monitoring. Moreover, we assume the concept of attention as Head Pose Estimation and Facial Landmark Detection tasks. Differently from other prop… ▽ More Recently, deep learning approaches have achieved promising results in various fields of computer vision. In this paper, we investigate the combination of deep learning based methods and depth maps as input images to tackle the problem of driver attention monitoring. Moreover, we assume the concept of attention as Head Pose Estimation and Facial Landmark Detection tasks. Differently from other proposals in the literature, the proposed systems are able to work directly and based only on raw depth data. All presented methods are trained and tested on two new public datasets, namely Pandora and MotorMark, achieving state-of-art results and running with real time performance. △ Less

Submitted 14 December, 2018; originally announced December 2018.

Comments: White paper about my research activity

The enhanced X-ray Timing and Polarimetry mission - eXTP

Authors: ShuangNan Zhang, Andrea Santangelo, Marco Feroci, YuPeng Xu, FangJun Lu, Yong Chen, Hua Feng, Shu Zhang, Søren Brandt, Margarita Hernanz, Luca Baldini, Enrico Bozzo, Riccardo Campana, Alessandra De Rosa, YongWei Dong, Yuri Evangelista, Vladimir Karas, Norbert Meidinger, Aline Meuris, Kirpal Nandra, Teng Pan, Giovanni Pareschi, Piotr Orleanski, QiuShi Huang, Stephane Schanne , et al. (125 additional authors not shown)

Abstract: In this paper we present the enhanced X-ray Timing and Polarimetry mission - eXTP. eXTP is a space science mission designed to study fundamental physics under extreme conditions of density, gravity and magnetism. The mission aims at determining the equation of state of matter at supra-nuclear density, measuring effects of QED, and understanding the dynamics of matter in strong-field gravity. In ad… ▽ More In this paper we present the enhanced X-ray Timing and Polarimetry mission - eXTP. eXTP is a space science mission designed to study fundamental physics under extreme conditions of density, gravity and magnetism. The mission aims at determining the equation of state of matter at supra-nuclear density, measuring effects of QED, and understanding the dynamics of matter in strong-field gravity. In addition to investigating fundamental physics, eXTP will be a very powerful observatory for astrophysics that will provide observations of unprecedented quality on a variety of galactic and extragalactic objects. In particular, its wide field monitoring capabilities will be highly instrumental to detect the electro-magnetic counterparts of gravitational wave sources. The paper provides a detailed description of: (1) the technological and technical aspects, and the expected performance of the instruments of the scientific payload; (2) the elements and functions of the mission, from the spacecraft to the ground segment. △ Less

Submitted 10 December, 2018; originally announced December 2018.

Comments: Accepted for publication on Sci. China Phys. Mech. Astron. (2019)

HERMES: An ultra-wide band X and gamma-ray transient monitor on board a nano-satellite constellation

Authors: F. Fuschino, R. Campana, C. Labanti, Y. Evangelista, M. Feroci, L. Burderi, F. Fiore, F. Ambrosino, G. Baldazzi, P. Bellutti, R. Bertacin, G. Bertuccio, G. Borghi, D. Cirrincione, D. Cauz, T. Di Salvo, F. Ficorella, M. Fiorini, A. Gambino, M. Gandola, M. Grassi, A. Guzman, R. Iaria, G. La Rosa, M. Lavagna , et al. (27 additional authors not shown)

Abstract: The High Energy Modular Ensemble of Satellites (HERMES) project is aimed to realize a modular X/gamma-ray monitor for transient events, to be placed on-board of a CubeSat bus. This expandable platform will achieve a significant impact on Gamma Ray Burst (GRB) science and on the detection of Gravitational Wave (GW) electromagnetic counterparts: the recent LIGO/VIRGO discoveries demonstrated that th… ▽ More The High Energy Modular Ensemble of Satellites (HERMES) project is aimed to realize a modular X/gamma-ray monitor for transient events, to be placed on-board of a CubeSat bus. This expandable platform will achieve a significant impact on Gamma Ray Burst (GRB) science and on the detection of Gravitational Wave (GW) electromagnetic counterparts: the recent LIGO/VIRGO discoveries demonstrated that the high-energy transient sky is still a field of extreme interest. The very complex temporal variability of GRBs (up to the millisecond scale) combined with the spatial and temporal coincidence between GWs and their electromagnetic counterparts suggest that upcoming instruments require sub-ms time resolution combined with a transient localization accuracy lower than a degree. The current phase of the ongoing HERMES project is focused on the realization of a technological pathfinder with a small network (3 units) of nano-satellites to be launched in mid 2020. We will show the potential and prospects for short and medium-term development of the project, demonstrating the disrupting possibilities for scientific investigations provided by the innovative concept of a new "modular astronomy" with nano-satellites (e.g. low developing costs, very short realization time). Finally, we will illustrate the characteristics of the HERMES Technological Pathfinder project, demonstrating how the scientific goals discussed are actually already reachable with the first nano-satellites of this constellation. The detector architecture will be described in detail, showing that the new generation of scintillators (e.g. GAGG:Ce) coupled with very performing Silicon Drift Detectors (SDD) and low noise Front-End-Electronics (FEE) are able to extend down to few keV the sensitivity band of the detector. The technical solutions for FEE, Back-End-Electronics (BEE) and Data Handling will be also described. △ Less

Submitted 11 December, 2018; v1 submitted 6 December, 2018; originally announced December 2018.

Comments: 4 pages, 2 figures. Accepted for publication in Nuclear Instrumentation and Methods in Physics Research, A

Learn to See by Events: Color Frame Synthesis from Event and RGB Cameras

Authors: Stefano Pini, Guido Borghi, Roberto Vezzani

Abstract: Event cameras are biologically-inspired sensors that gather the temporal evolution of the scene. They capture pixel-wise brightness variations and output a corresponding stream of asynchronous events. Despite having multiple advantages with respect to traditional cameras, their use is partially prevented by the limited applicability of traditional data processing and vision algorithms. To this aim… ▽ More Event cameras are biologically-inspired sensors that gather the temporal evolution of the scene. They capture pixel-wise brightness variations and output a corresponding stream of asynchronous events. Despite having multiple advantages with respect to traditional cameras, their use is partially prevented by the limited applicability of traditional data processing and vision algorithms. To this aim, we present a framework which exploits the output stream of event cameras to synthesize RGB frames, relying on an initial or a periodic set of color key-frames and the sequence of intermediate events. Differently from existing work, we propose a deep learning-based frame synthesis method, consisting of an adversarial architecture combined with a recurrent module. Qualitative results and quantitative per-pixel, perceptual, and semantic evaluation on four public datasets confirm the quality of the synthesized images. △ Less

Submitted 10 December, 2019; v1 submitted 5 December, 2018; originally announced December 2018.

Comments: Accepted as full oral at the 15th International Conference on Computer Vision Theory and Applications (VISAPP) 2020