Showing 1–50 of 57 results for author: Bhattacharjee, T

REPeat: A Real2Sim2Real Approach for Pre-acquisition of Soft Food Items in Robot-assisted Feeding

Authors: Nayoung Ha, Ruolin Ye, Ziang Liu, Shubhangi Sinha, Tapomayukh Bhattacharjee

Abstract: The paper presents REPeat, a Real2Sim2Real framework designed to enhance bite acquisition in robot-assisted feeding for soft foods. It uses `pre-acquisition actions' such as pushing, cutting, and flipping to improve the success rate of bite acquisition actions such as skewering, scooping, and twirling. If the data-driven model predicts low success for direct bite acquisition, the system initiates… ▽ More The paper presents REPeat, a Real2Sim2Real framework designed to enhance bite acquisition in robot-assisted feeding for soft foods. It uses `pre-acquisition actions' such as pushing, cutting, and flipping to improve the success rate of bite acquisition actions such as skewering, scooping, and twirling. If the data-driven model predicts low success for direct bite acquisition, the system initiates a Real2Sim phase, reconstructing the food's geometry in a simulation. The robot explores various pre-acquisition actions in the simulation, then a Sim2Real step renders a photorealistic image to reassess success rates. If the success improves, the robot applies the action in reality. We evaluate the system on 15 diverse plates with 10 types of food items for a soft food diet, showing improvement in bite acquisition success rates by 27\% on average across all plates. See our project website at https://emprise.cs.cornell.edu/repeat. △ Less

Submitted 13 October, 2024; originally announced October 2024.

FLAIR: Feeding via Long-horizon AcquIsition of Realistic dishes

Authors: Rajat Kumar Jenamani, Priya Sundaresan, Maram Sakr, Tapomayukh Bhattacharjee, Dorsa Sadigh

Abstract: Robot-assisted feeding has the potential to improve the quality of life for individuals with mobility limitations who are unable to feed themselves independently. However, there exists a large gap between the homogeneous, curated plates existing feeding systems can handle, and truly in-the-wild meals. Feeding realistic plates is immensely challenging due to the sheer range of food items that a rob… ▽ More Robot-assisted feeding has the potential to improve the quality of life for individuals with mobility limitations who are unable to feed themselves independently. However, there exists a large gap between the homogeneous, curated plates existing feeding systems can handle, and truly in-the-wild meals. Feeding realistic plates is immensely challenging due to the sheer range of food items that a robot may encounter, each requiring specialized manipulation strategies which must be sequenced over a long horizon to feed an entire meal. An assistive feeding system should not only be able to sequence different strategies efficiently in order to feed an entire meal, but also be mindful of user preferences given the personalized nature of the task. We address this with FLAIR, a system for long-horizon feeding which leverages the commonsense and few-shot reasoning capabilities of foundation models, along with a library of parameterized skills, to plan and execute user-preferred and efficient bite sequences. In real-world evaluations across 6 realistic plates, we find that FLAIR can effectively tap into a varied library of skills for efficient food pickup, while adhering to the diverse preferences of 42 participants without mobility limitations as evaluated in a user study. We demonstrate the seamless integration of FLAIR with existing bite transfer methods [19, 28], and deploy it across 2 institutions and 3 robots, illustrating its adaptability. Finally, we illustrate the real-world efficacy of our system by successfully feeding a care recipient with severe mobility limitations. Supplementary materials and videos can be found at: https://emprise.cs.cornell.edu/flair . △ Less

Submitted 10 July, 2024; originally announced July 2024.

Comments: RSS 2024

To Ask or Not To Ask: Human-in-the-loop Contextual Bandits with Applications in Robot-Assisted Feeding

Authors: Rohan Banerjee, Rajat Kumar Jenamani, Sidharth Vasudev, Amal Nanavati, Sarah Dean, Tapomayukh Bhattacharjee

Abstract: Robot-assisted bite acquisition involves picking up food items that vary in their shape, compliance, size, and texture. A fully autonomous strategy for bite acquisition is unlikely to efficiently generalize to this wide variety of food items. We propose to leverage the presence of the care recipient to provide feedback when the system encounters novel food items. However, repeatedly asking for hel… ▽ More Robot-assisted bite acquisition involves picking up food items that vary in their shape, compliance, size, and texture. A fully autonomous strategy for bite acquisition is unlikely to efficiently generalize to this wide variety of food items. We propose to leverage the presence of the care recipient to provide feedback when the system encounters novel food items. However, repeatedly asking for help imposes cognitive workload on the user. In this work, we formulate human-in-the-loop bite acquisition within a contextual bandit framework and propose a novel method, LinUCB-QG, that selectively asks for help. This method leverages a predictive model of cognitive workload in response to different types and timings of queries, learned using data from 89 participants collected in an online user study. We demonstrate that this method enhances the balance between task performance and cognitive workload compared to autonomous and querying baselines, through experiments in a food dataset-based simulator and a user study with 18 participants without mobility limitations. △ Less

Submitted 19 July, 2024; v1 submitted 11 May, 2024; originally announced May 2024.

Comments: The second and third authors contributed equally. The last two authors advised equally

CushSense: Soft, Stretchable, and Comfortable Tactile-Sensing Skin for Physical Human-Robot Interaction

Authors: Boxin Xu, Luoyan Zhong, Grace Zhang, Xiaoyu Liang, Diego Virtue, Rishabh Madan, Tapomayukh Bhattacharjee

Abstract: Whole-arm tactile feedback is crucial for robots to ensure safe physical interaction with their surroundings. This paper introduces CushSense, a fabric-based soft and stretchable tactile-sensing skin designed for physical human-robot interaction (pHRI) tasks such as robotic caregiving. Using stretchable fabric and hyper-elastic polymer, CushSense identifies contacts by monitoring capacitive change… ▽ More Whole-arm tactile feedback is crucial for robots to ensure safe physical interaction with their surroundings. This paper introduces CushSense, a fabric-based soft and stretchable tactile-sensing skin designed for physical human-robot interaction (pHRI) tasks such as robotic caregiving. Using stretchable fabric and hyper-elastic polymer, CushSense identifies contacts by monitoring capacitive changes due to skin deformation. CushSense is cost-effective ($\sim$US\$7 per taxel) and easy to fabricate. We detail the sensor design and fabrication process and perform characterization, highlighting its high sensing accuracy (relative error of 0.58%) and durability (0.054% accuracy drop after 1000 interactions). We also present a user study underscoring its perceived safety and comfort for the assistive task of limb manipulation. We open source all sensor-related resources on https://emprise.cs.cornell.edu/cushsense. △ Less

Submitted 6 May, 2024; originally announced May 2024.

Comments: 8 pages, 8 figures, ICRA2024

MORPHeus: a Multimodal One-armed Robot-assisted Peeling System with Human Users In-the-loop

Authors: Ruolin Ye, Yifei Hu, Yuhan, Bian, Luke Kulm, Tapomayukh Bhattacharjee

Abstract: Meal preparation is an important instrumental activity of daily living~(IADL). While existing research has explored robotic assistance in meal preparation tasks such as cutting and cooking, the crucial task of peeling has received less attention. Robot-assisted peeling, conventionally a bimanual task, is challenging to deploy in the homes of care recipients using two wheelchair-mounted robot arms… ▽ More Meal preparation is an important instrumental activity of daily living~(IADL). While existing research has explored robotic assistance in meal preparation tasks such as cutting and cooking, the crucial task of peeling has received less attention. Robot-assisted peeling, conventionally a bimanual task, is challenging to deploy in the homes of care recipients using two wheelchair-mounted robot arms due to ergonomic and transferring challenges. This paper introduces a robot-assisted peeling system utilizing a single robotic arm and an assistive cutting board, inspired by the way individuals with one functional hand prepare meals. Our system incorporates a multimodal active perception module to determine whether an area on the food is peeled, a human-in-the-loop long-horizon planner to perform task planning while catering to a user's preference for peeling coverage, and a compliant controller to peel the food items. We demonstrate the system on 12 food items representing the extremes of different shapes, sizes, skin thickness, surface textures, skin vs flesh colors, and deformability. △ Less

Submitted 11 May, 2024; v1 submitted 9 April, 2024; originally announced April 2024.

An Adaptable, Safe, and Portable Robot-Assisted Feeding System

Authors: Ethan Kroll Gordon, Rajat Kumar Jenamani, Amal Nanavati, Ziang Liu, Haya Bolotski, Raida Karim, Daniel Stabile, Atharva Kashyap, Bernie Hao Zhu, Xilai Dai, Tyler Schrenk, Jonathan Ko, Taylor Kessler Faulkner, Tapomayukh Bhattacharjee, Siddhartha Srinivasa

Abstract: We demonstrate a robot-assisted feeding system that enables people with mobility impairments to feed themselves. Our system design embodies Safety, Portability, and User Control, with comprehensive full-stack safety checks, the ability to be mounted on and powered by any powered wheelchair, and a custom web-app allowing care-recipients to leverage their own assistive devices for robot control. For… ▽ More We demonstrate a robot-assisted feeding system that enables people with mobility impairments to feed themselves. Our system design embodies Safety, Portability, and User Control, with comprehensive full-stack safety checks, the ability to be mounted on and powered by any powered wheelchair, and a custom web-app allowing care-recipients to leverage their own assistive devices for robot control. For bite acquisition, we leverage multi-modal online learning to tractably adapt to unseen food types. For bite transfer, we leverage real-time mouth perception and interaction-aware control. Co-designed with community researchers, our system has been validated through multiple end-user studies. △ Less

Submitted 6 March, 2024; originally announced March 2024.

Comments: HRI 2024 Demo; Corrected inaccurate author ordering in ACM DL which occurred due to formatting issues

Feel the Bite: Robot-Assisted Inside-Mouth Bite Transfer using Robust Mouth Perception and Physical Interaction-Aware Control

Authors: Rajat Kumar Jenamani, Daniel Stabile, Ziang Liu, Abrar Anwar, Katherine Dimitropoulou, Tapomayukh Bhattacharjee

Abstract: Robot-assisted feeding can greatly enhance the lives of those with mobility limitations. Modern feeding systems can pick up and position food in front of a care recipient's mouth for a bite. However, many with severe mobility constraints cannot lean forward and need direct inside-mouth food placement. This demands precision, especially for those with restricted mouth openings, and appropriately re… ▽ More Robot-assisted feeding can greatly enhance the lives of those with mobility limitations. Modern feeding systems can pick up and position food in front of a care recipient's mouth for a bite. However, many with severe mobility constraints cannot lean forward and need direct inside-mouth food placement. This demands precision, especially for those with restricted mouth openings, and appropriately reacting to various physical interactions - incidental contacts as the utensil moves inside, impulsive contacts due to sudden muscle spasms, deliberate tongue maneuvers by the person being fed to guide the utensil, and intentional bites. In this paper, we propose an inside-mouth bite transfer system that addresses these challenges with two key components: a multi-view mouth perception pipeline robust to tool occlusion, and a control mechanism that employs multimodal time-series classification to discern and react to different physical interactions. We demonstrate the efficacy of these individual components through two ablation studies. In a full system evaluation, our system successfully fed 13 care recipients with diverse mobility challenges. Participants consistently emphasized the comfort and safety of our inside-mouth bite transfer system, and gave it high technology acceptance ratings - underscoring its transformative potential in real-world scenarios. Supplementary materials and videos can be found at http://emprise.cs.cornell.edu/bitetransfer/ . △ Less

Submitted 6 March, 2024; originally announced March 2024.

Comments: HRI 2024

RABBIT: A Robot-Assisted Bed Bathing System with Multimodal Perception and Integrated Compliance

Authors: Rishabh Madan, Skyler Valdez, David Kim, Sujie Fang, Luoyan Zhong, Diego Virtue, Tapomayukh Bhattacharjee

Abstract: This paper introduces RABBIT, a novel robot-assisted bed bathing system designed to address the growing need for assistive technologies in personal hygiene tasks. It combines multimodal perception and dual (software and hardware) compliance to perform safe and comfortable physical human-robot interaction. Using RGB and thermal imaging to segment dry, soapy, and wet skin regions accurately, RABBIT… ▽ More This paper introduces RABBIT, a novel robot-assisted bed bathing system designed to address the growing need for assistive technologies in personal hygiene tasks. It combines multimodal perception and dual (software and hardware) compliance to perform safe and comfortable physical human-robot interaction. Using RGB and thermal imaging to segment dry, soapy, and wet skin regions accurately, RABBIT can effectively execute washing, rinsing, and drying tasks in line with expert caregiving practices. Our system includes custom-designed motion primitives inspired by human caregiving techniques, and a novel compliant end-effector called Scrubby, optimized for gentle and effective interactions. We conducted a user study with 12 participants, including one participant with severe mobility limitations, demonstrating the system's effectiveness and perceived comfort. Supplementary material and videos can be found on our website https://emprise.cs.cornell.edu/rabbit. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Comments: 10 pages, 8 figures, 19th Annual ACM/IEEE International Conference on Human Robot Interaction (HRI)

Dynamic Clustering of Active Rings

Authors: Ligesh Theeyancheri, Subhasish Chaki, Tapomoy Bhattacharjee, Rajarshi Chakrabarti

Abstract: A collection of rings made of active Brownian particles (ABPs) for different packing fractions and activities is investigated using computer simulations. We show that active rings display an emergent dynamic clustering instead of the conventional motility-induced phase separation (MIPS) as in the case of collection of ABPs. Surprisingly, increasing packing fraction of rings exhibits a non-monotoni… ▽ More A collection of rings made of active Brownian particles (ABPs) for different packing fractions and activities is investigated using computer simulations. We show that active rings display an emergent dynamic clustering instead of the conventional motility-induced phase separation (MIPS) as in the case of collection of ABPs. Surprisingly, increasing packing fraction of rings exhibits a non-monotonicity in the dynamics due to the formation of a large number of small clusters. The conformational fluctuations of the polymers suppress the usual MIPS exhibited by ABPs. Our findings demonstrate how the motion of a collection of rings is influenced by the interplay of activity, topology, and connectivity. △ Less

Submitted 24 February, 2024; v1 submitted 16 November, 2023; originally announced November 2023.

Journal ref: Phys. Rev. Research 6, L012038 (2024)

Active Dynamics of Linear Chains and Rings in Porous Media

Authors: Ligesh Theeyancheri, Subhasish Chaki, Tapomoy Bhattacharjee, Rajarshi Chakrabarti

Abstract: To understand the dynamical and conformational properties of deformable active agents in porous media, we computationally investigate the dynamics of linear chains and rings made of active Brownian monomers. In porous media, flexible linear chains and rings always migrate smoothly and undergo activity-induced swelling. However, semiflexible linear chains though navigate smoothly, shrink at lower a… ▽ More To understand the dynamical and conformational properties of deformable active agents in porous media, we computationally investigate the dynamics of linear chains and rings made of active Brownian monomers. In porous media, flexible linear chains and rings always migrate smoothly and undergo activity-induced swelling. However, semiflexible linear chains though navigate smoothly, shrink at lower activities, followed by swelling at higher activities, while semiflexible rings exhibit a contrasting behavior. Semiflexible rings shrink, get trapped at lower activities, and escape at higher activities. This demonstrates how activity and topology interplay and control the structure and dynamics of linear chains and rings in porous media. We envision that our study will shed light on understanding the mode of transport of shape-changing active agents in porous media. △ Less

Submitted 5 July, 2023; originally announced July 2023.

Journal ref: J. Chem. Phys. 159, 014902 (2023)

SPARCS: Structuring Physically Assistive Robotics for Caregiving with Stakeholders-in-the-loop

Authors: Rishabh Madan, Rajat Kumar Jenamani, Vy Thuy Nguyen, Ahmed Moustafa, Xuefeng Hu, Katherine Dimitropoulou, Tapomayukh Bhattacharjee

Abstract: Existing work in physical robot caregiving is limited in its ability to provide long-term assistance. This is majorly due to (i) lack of well-defined problems, (ii) diversity of tasks, and (iii) limited access to stakeholders from the caregiving community. We propose Structuring Physically Assistive Robotics for Caregiving with Stakeholders-in-the-loop (SPARCS) to address these challenges. SPARCS… ▽ More Existing work in physical robot caregiving is limited in its ability to provide long-term assistance. This is majorly due to (i) lack of well-defined problems, (ii) diversity of tasks, and (iii) limited access to stakeholders from the caregiving community. We propose Structuring Physically Assistive Robotics for Caregiving with Stakeholders-in-the-loop (SPARCS) to address these challenges. SPARCS is a framework for physical robot caregiving comprising (i) Building Blocks, models that define physical robot caregiving scenarios, (ii) Structured Workflows, hierarchical workflows that enable us to answer the Whats and Hows of physical robot caregiving, and (iii) SPARCS-Box, a web-based platform to facilitate dialogue between all stakeholders. We collect clinical data for six care recipients with varying disabilities and demonstrate the use of SPARCS in designing well-defined caregiving scenarios and identifying their care requirements. All the data and workflows are available on SPARCS-Box. We demonstrate the utility of SPARCS in building a robot-assisted feeding system for one of the care recipients. We also perform experiments to show the adaptability of this system to different caregiving scenarios. Finally, we identify open challenges in physical robot caregiving by consulting care recipients and caregivers. Supplementary material can be found at https://emprise.cs.cornell.edu/sparcs/. △ Less

Submitted 20 October, 2022; originally announced October 2022.

Comments: 8 pages, 9 figures, IEEE International Conference on Intelligent Robots and Systems (IROS) 2022

RCareWorld: A Human-centric Simulation World for Caregiving Robots

Authors: Ruolin Ye, Wenqiang Xu, Haoyuan Fu, Rajat Kumar Jenamani, Vy Nguyen, Cewu Lu, Katherine Dimitropoulou, Tapomayukh Bhattacharjee

Abstract: We present RCareWorld, a human-centric simulation world for physical and social robotic caregiving designed with inputs from stakeholders, including care recipients, caregivers, occupational therapists, and roboticists. RCareWorld has realistic human models of care recipients with mobility limitations and caregivers, home environments with multiple levels of accessibility and assistive devices, an… ▽ More We present RCareWorld, a human-centric simulation world for physical and social robotic caregiving designed with inputs from stakeholders, including care recipients, caregivers, occupational therapists, and roboticists. RCareWorld has realistic human models of care recipients with mobility limitations and caregivers, home environments with multiple levels of accessibility and assistive devices, and robots commonly used for caregiving. It interfaces with various physics engines to model diverse material types necessary for simulating caregiving scenarios, and provides the capability to plan, control, and learn both human and robot control policies by integrating with state-of-the-art external planning and learning libraries, and VR devices. We propose a set of realistic caregiving tasks in RCareWorld as a benchmark for physical robotic caregiving and provide baseline control policies for them. We illustrate the high-fidelity simulation capabilities of RCareWorld by demonstrating the execution of a policy learnt in simulation for one of these tasks on a real-world setup. Additionally, we perform a real-world social robotic caregiving experiment using behaviors modeled in RCareWorld. Robotic caregiving, though potentially impactful towards enhancing the quality of life of care recipients and caregivers, is a field with many barriers to entry due to its interdisciplinary facets. RCareWorld takes the first step towards building a realistic simulation world for robotic caregiving that would enable researchers worldwide to contribute to this impactful field. Demo videos and supplementary materials can be found at: https://emprise.cs.cornell.edu/rcareworld/. △ Less

Submitted 19 October, 2022; originally announced October 2022.

Data-driven Discovery of Chemotactic Migration of Bacteria via Machine Learning

Authors: Yorgos M. Psarellis, Seungjoon Lee, Tapomoy Bhattacharjee, Sujit S. Datta, Juan M. Bello-Rivas, Ioannis G. Kevrekidis

Abstract: E. coli chemotactic motion in the presence of a chemoattractant field has been extensively studied using wet laboratory experiments, stochastic computational models as well as partial differential equation-based models (PDEs). The most challenging step in bridging these approaches, is establishing a closed form of the so-called chemotactic term, which describes how bacteria bias their motion up ch… ▽ More E. coli chemotactic motion in the presence of a chemoattractant field has been extensively studied using wet laboratory experiments, stochastic computational models as well as partial differential equation-based models (PDEs). The most challenging step in bridging these approaches, is establishing a closed form of the so-called chemotactic term, which describes how bacteria bias their motion up chemonutrient concentration gradients, as a result of a cascade of biochemical processes. Data-driven models can be used to learn the entire evolution operator of the chemotactic PDEs (black box models), or, in a more targeted fashion, to learn just the chemotactic term (gray box models). In this work, data-driven Machine Learning approaches for learning the underlying model PDEs are (a) validated through the use of simulation data from established continuum models and (b) used to infer chemotactic PDEs from experimental data. Even when the data at hand are sparse (coarse in space and/or time), noisy (due to inherent stochasticity in measurements) or partial (e.g. lack of measurements of the associated chemoattractant field), we can attempt to learn the right-hand-side of a closed PDE for an evolving bacterial density. In fact we show that data-driven PDEs including a short history of the bacterial density field (e.g. in the form of higher-order in time PDEs in terms of the measurable bacterial density) can be successful in predicting further bacterial density evolution, and even possibly recovering estimates of the unmeasured chemonutrient field. The main tool in this effort is the effective low-dimensionality of the dynamics (in the spirit of the Whitney and Takens embedding theorems). The resulting data-driven PDE can then be simulated to reproduce/predict computational or experimental bacterial density profile data, and estimate the underlying (unmeasured) chemonutrient field evolution. △ Less

Submitted 24 August, 2022; originally announced August 2022.

Comments: 44 pages, 20 figures, 3 tables

Robotic Dough Shaping

Authors: Jan Ondras, Di Ni, Xi Deng, Zeqi Gu, Henry Zheng, Tapomayukh Bhattacharjee

Abstract: Robotic manipulation of deformable objects gains great attention due to its wide applications including medical surgery, home assistance, and automatic food preparation. The ability to deform soft objects remains a great challenge for robots due to difficulties in defining the problem mathematically. In this paper, we address the problem of shaping a piece of dough-like deformable material into a… ▽ More Robotic manipulation of deformable objects gains great attention due to its wide applications including medical surgery, home assistance, and automatic food preparation. The ability to deform soft objects remains a great challenge for robots due to difficulties in defining the problem mathematically. In this paper, we address the problem of shaping a piece of dough-like deformable material into a 2D target shape presented upfront. We use a 6 degree-of-freedom WidowX-250 Robot Arm equipped with a rolling pin and information collected from an RGB-D camera and a tactile sensor. We present and compare several control policies, including a dough shrinking action, in extensive experiments across three kinds of deformable materials and across three target dough shape sizes, achieving the intersection over union (IoU) of 0.90. Our results show that: i) rolling dough from the highest dough point is more efficient than from the 2D/3D dough centroid; ii) it might be better to stop the roll movement at the current dough boundary as opposed to the target shape outline; iii) the shrink action might be beneficial only if properly tuned with respect to the expand action; and iv) the Play-Doh material is easier to shape to a target shape as compared to Plasticine or Kinetic sand. Video demonstrations of our work are available at https://youtu.be/ZzLMxuITdt4 △ Less

Submitted 5 October, 2022; v1 submitted 31 July, 2022; originally announced August 2022.

Comments: To be published in International Conference on Control, Automation and Systems (ICCAS), 2022

Human-Robot Commensality: Bite Timing Prediction for Robot-Assisted Feeding in Groups

Authors: Jan Ondras, Abrar Anwar, Tong Wu, Fanjun Bu, Malte Jung, Jorge Jose Ortiz, Tapomayukh Bhattacharjee

Abstract: We develop data-driven models to predict when a robot should feed during social dining scenarios. Being able to eat independently with friends and family is considered one of the most memorable and important activities for people with mobility limitations. While existing robotic systems for feeding people with mobility limitations focus on solitary dining, commensality, the act of eating together,… ▽ More We develop data-driven models to predict when a robot should feed during social dining scenarios. Being able to eat independently with friends and family is considered one of the most memorable and important activities for people with mobility limitations. While existing robotic systems for feeding people with mobility limitations focus on solitary dining, commensality, the act of eating together, is often the practice of choice. Sharing meals with others introduces the problem of socially appropriate bite timing for a robot, i.e. the appropriate timing for the robot to feed without disrupting the social dynamics of a shared meal. Our key insight is that bite timing strategies that take into account the delicate balance of social cues can lead to seamless interactions during robot-assisted feeding in a social dining scenario. We approach this problem by collecting a Human-Human Commensality Dataset (HHCD) containing 30 groups of three people eating together. We use this dataset to analyze human-human commensality behaviors and develop bite timing prediction models in social dining scenarios. We also transfer these models to human-robot commensality scenarios. Our user studies show that prediction improves when our algorithm uses multimodal social signaling cues between diners to model bite timing. The HHCD dataset, videos of user studies, and code are available at https://emprise.cs.cornell.edu/hrcom/ △ Less

Submitted 16 November, 2022; v1 submitted 7 July, 2022; originally announced July 2022.

Comments: 6th Conference on Robot Learning (CoRL), 2022

Real Robot Challenge 2021: Cartesian Position Control with Triangle Grasp and Trajectory Interpolation

Authors: Rishabh Madan, Harshit Sikchi, Ethan K. Gordon, Tapomayukh Bhattacharjee

Abstract: We present our runner-up approach for the Real Robot Challenge 2021. We build upon our previous approach used in Real Robot Challenge 2020. To solve the task of sequential goal-reaching we focus on two aspects to achieving near-optimal trajectory: Grasp stability and Controller performance. In the RRC 2021 simulated challenge, our method relied on a hand-designed Pinch grasp combined with Trajecto… ▽ More We present our runner-up approach for the Real Robot Challenge 2021. We build upon our previous approach used in Real Robot Challenge 2020. To solve the task of sequential goal-reaching we focus on two aspects to achieving near-optimal trajectory: Grasp stability and Controller performance. In the RRC 2021 simulated challenge, our method relied on a hand-designed Pinch grasp combined with Trajectory Interpolation for better stability during the motion for fast goal-reaching. In Stage 1, we observe reverting to a Triangular grasp to provide a more stable grasp when combined with Trajectory Interpolation, possibly due to the sim2real gap. The video demonstration for our approach is available at https://youtu.be/dlOueoaRWrM. The code is publicly available at https://github.com/madan96/benchmark-rrc. △ Less

Submitted 19 March, 2022; v1 submitted 15 March, 2022; originally announced March 2022.

A biophysical threshold for biofilm formation

Authors: Jenna A. Ott, Selena Chiu, Daniel B. Amchin, Tapomoy Bhattacharjee, Sujit S. Datta

Abstract: Bacteria are ubiquitous in our daily lives, either as motile planktonic cells or as immobilized surface-attached biofilms. These different phenotypic states play key roles in agriculture, environment, industry, and medicine; hence, it is critically important to be able to predict the conditions under which bacteria transition from one state to the other. Unfortunately, these transitions depend on… ▽ More Bacteria are ubiquitous in our daily lives, either as motile planktonic cells or as immobilized surface-attached biofilms. These different phenotypic states play key roles in agriculture, environment, industry, and medicine; hence, it is critically important to be able to predict the conditions under which bacteria transition from one state to the other. Unfortunately, these transitions depend on a dizzyingly complex array of factors that are determined by the intrinsic properties of the individual cells as well as those of their surrounding environments, and are thus challenging to describe. To address this issue, here, we develop a generally-applicable biophysical model of the interplay between motility-mediated dispersal and biofilm formation under positive quorum sensing control. Using this model, we establish a universal rule predicting how the onset and extent of biofilm formation depend collectively on cell concentration and motility, nutrient diffusion and consumption, chemotactic sensing, and autoinducer production. Our work thus provides a key step toward quantitatively predicting and controlling biofilm formation in diverse and complex settings. △ Less

Submitted 5 December, 2021; originally announced December 2021.

Balancing Efficiency and Comfort in Robot-Assisted Bite Transfer

Authors: Suneel Belkhale, Ethan K. Gordon, Yuxiao Chen, Siddhartha Srinivasa, Tapomayukh Bhattacharjee, Dorsa Sadigh

Abstract: Robot-assisted feeding in household environments is challenging because it requires robots to generate trajectories that effectively bring food items of varying shapes and sizes into the mouth while making sure the user is comfortable. Our key insight is that in order to solve this challenge, robots must balance the efficiency of feeding a food item with the comfort of each individual bite. We for… ▽ More Robot-assisted feeding in household environments is challenging because it requires robots to generate trajectories that effectively bring food items of varying shapes and sizes into the mouth while making sure the user is comfortable. Our key insight is that in order to solve this challenge, robots must balance the efficiency of feeding a food item with the comfort of each individual bite. We formalize comfort and efficiency as heuristics to incorporate in motion planning. We present an approach based on heuristics-guided bi-directional Rapidly-exploring Random Trees (h-BiRRT) that selects bite transfer trajectories of arbitrary food item geometries and shapes using our developed bite efficiency and comfort heuristics and a learned constraint model. Real-robot evaluations show that optimizing both comfort and efficiency significantly outperforms a fixed-pose based method, and users preferred our method significantly more than that of a method that maximizes only user comfort. Videos and Appendices are found on our website: https://sites.google.com/view/comfortbitetransfer-icra22/home. △ Less

Submitted 24 June, 2022; v1 submitted 22 November, 2021; originally announced November 2021.

Migration of Active Rings in Porous Media

Authors: Ligesh Theeyancheri, Subhasish Chaki, Tapomoy Bhattacharjee, Rajarshi Chakrabarti

Abstract: Inspired by how the shape deformations in active organisms help them to migrate through disordered porous environments, we simulate active ring polymers in two-dimensional random porous media. Flexible and inextensible active ring polymers navigate smoothly through the disordered media. In contrast, semiflexible rings undergo transient trapping inside the pore space; the degree of trapping is inve… ▽ More Inspired by how the shape deformations in active organisms help them to migrate through disordered porous environments, we simulate active ring polymers in two-dimensional random porous media. Flexible and inextensible active ring polymers navigate smoothly through the disordered media. In contrast, semiflexible rings undergo transient trapping inside the pore space; the degree of trapping is inversely correlated with the increase in activity. We discover that flexible rings swell while inextensible and semiflexible rings monotonically shrink upon increasing the activity. Together, our findings identify the optimal migration of active ring polymers through porous media. △ Less

Submitted 15 August, 2022; v1 submitted 9 October, 2021; originally announced October 2021.

Journal ref: Phys. Rev. E 106, 014504, (2022)

Real Robot Challenge: A Robotics Competition in the Cloud

Authors: Stefan Bauer, Felix Widmaier, Manuel Wüthrich, Annika Buchholz, Sebastian Stark, Anirudh Goyal, Thomas Steinbrenner, Joel Akpo, Shruti Joshi, Vincent Berenz, Vaibhav Agrawal, Niklas Funk, Julen Urain De Jesus, Jan Peters, Joe Watson, Claire Chen, Krishnan Srinivasan, Junwu Zhang, Jeffrey Zhang, Matthew R. Walter, Rishabh Madan, Charles Schaff, Takahiro Maeda, Takuma Yoneda, Denis Yarats , et al. (17 additional authors not shown)

Abstract: Dexterous manipulation remains an open problem in robotics. To coordinate efforts of the research community towards tackling this problem, we propose a shared benchmark. We designed and built robotic platforms that are hosted at MPI for Intelligent Systems and can be accessed remotely. Each platform consists of three robotic fingers that are capable of dexterous object manipulation. Users are able… ▽ More Dexterous manipulation remains an open problem in robotics. To coordinate efforts of the research community towards tackling this problem, we propose a shared benchmark. We designed and built robotic platforms that are hosted at MPI for Intelligent Systems and can be accessed remotely. Each platform consists of three robotic fingers that are capable of dexterous object manipulation. Users are able to control the platforms remotely by submitting code that is executed automatically, akin to a computational cluster. Using this setup, i) we host robotics competitions, where teams from anywhere in the world access our platforms to tackle challenging tasks ii) we publish the datasets collected during these competitions (consisting of hundreds of robot hours), and iii) we give researchers access to these platforms for their own projects. △ Less

Submitted 10 June, 2022; v1 submitted 22 September, 2021; originally announced September 2021.

Influence of confinement on the spreading of bacterial populations

Authors: Daniel B. Amchin, Jenna A. Ott, Tapomoy Bhattacharjee, Sujit S. Datta

Abstract: The spreading of bacterial populations is central to processes in agriculture, the environment, and medicine. However, existing models of spreading typically focus on cells in unconfined settings--despite the fact that many bacteria inhabit complex and crowded environments, such as soils, sediments, and biological tissues/gels, in which solid obstacles confine the cells and thereby strongly regula… ▽ More The spreading of bacterial populations is central to processes in agriculture, the environment, and medicine. However, existing models of spreading typically focus on cells in unconfined settings--despite the fact that many bacteria inhabit complex and crowded environments, such as soils, sediments, and biological tissues/gels, in which solid obstacles confine the cells and thereby strongly regulate population spreading. Here, we develop an extended version of the classic Keller-Segel model of bacterial spreading that incorporates the influence of confinement in promoting both cell-solid and cell-cell collisions. Numerical simulations of this extended model demonstrate how confinement fundamentally alters the dynamics and morphology of spreading bacterial populations, in good agreement with recent experimental results. In particular, with increasing confinement, we find that cell-cell collisions increasingly hinder the initial formation and the long-time propagation speed of chemotactic pulses. Moreover, also with increasing confinement, we find that cellular growth and division plays an increasingly dominant role in driving population spreading--eventually leading to a transition from chemotactic spreading to growth-driven spreading via a slower, jammed front. This work thus provides a theoretical foundation for further investigations of the influence of confinement on bacterial spreading. More broadly, these results help to provide a framework to predict and control the dynamics of bacterial populations in complex and crowded environments. △ Less

Submitted 5 August, 2021; originally announced August 2021.

Journal ref: PLoS Computational Biology, 18, e1010063 (2022)

Desk Organization: Effect of Multimodal Inputs on Spatial Relational Learning

Authors: Ryan Rowe, Shivam Singhal, Daqing Yi, Tapomayukh Bhattacharjee, Siddhartha S. Srinivasa

Abstract: For robots to operate in a three dimensional world and interact with humans, learning spatial relationships among objects in the surrounding is necessary. Reasoning about the state of the world requires inputs from many different sensory modalities including vision ($V$) and haptics ($H$). We examine the problem of desk organization: learning how humans spatially position different objects on a pl… ▽ More For robots to operate in a three dimensional world and interact with humans, learning spatial relationships among objects in the surrounding is necessary. Reasoning about the state of the world requires inputs from many different sensory modalities including vision ($V$) and haptics ($H$). We examine the problem of desk organization: learning how humans spatially position different objects on a planar surface according to organizational ''preference''. We model this problem by examining how humans position objects given multiple features received from vision and haptic modalities. However, organizational habits vary greatly between people both in structure and adherence. To deal with user organizational preferences, we add an additional modality, ''utility'' ($U$), which informs on a particular human's perceived usefulness of a given object. Models were trained as generalized (over many different people) or tailored (per person). We use two types of models: random forests, which focus on precise multi-task classification, and Markov logic networks, which provide an easily interpretable insight into organizational habits. The models were applied to both synthetic data, which proved to be learnable when using fixed organizational constraints, and human-study data, on which the random forest achieved over 90% accuracy. Over all combinations of $\{H, U, V\}$ modalities, $UV$ and $HUV$ were the most informative for organization. In a follow-up study, we gauged participants preference of desk organizations by a generalized random forest organization vs. by a random model. On average, participants rated the random forest models as 4.15 on a 5-point Likert scale compared to 1.84 for the random model △ Less

Submitted 2 August, 2021; originally announced August 2021.

Comments: 8 pages, 7 figures

ACM Class: I.2.9

Journal ref: 2019 28th IEEE International Conference on Robot and Human Interactive Communication (RO-MAN) (pp. 1-8). IEEE

A Geometric Criterion for the Optimal Spreading of Active Polymers in Porous Media

Authors: Christina Kurzthaler, Suvendu Mandal, Tapomoy Bhattacharjee, Hartmut Löwen, Sujit S. Datta, Howard A. Stone

Abstract: We perform Brownian dynamics simulations of active stiff polymers undergoing run-reverse dynamics, and so mimic bacterial swimming, in porous media. In accord with recent experiments of \emph{Escherichia coli}, the polymer dynamics are characterized by trapping phases interrupted by directed hopping motion through the pores. We find that the effective translational diffusivities of run-reverse age… ▽ More We perform Brownian dynamics simulations of active stiff polymers undergoing run-reverse dynamics, and so mimic bacterial swimming, in porous media. In accord with recent experiments of \emph{Escherichia coli}, the polymer dynamics are characterized by trapping phases interrupted by directed hopping motion through the pores. We find that the effective translational diffusivities of run-reverse agents can be enhanced up to two orders in magnitude, compared to their non-reversing counterparts, and exhibit a non-monotonic behavior as a function of the reversal rate, which we rationalize using a coarse-grained model. Furthermore, we discover a geometric criterion for the optimal spreading, which emerges when their run lengths are comparable to the longest straight path available in the porous medium. More significantly, our criterion unifies results for porous media with disparate pore sizes and shapes and thus provides a fundamental principle for optimal transport of microorganisms and cargo-carriers in densely-packed biological and environmental settings. △ Less

Submitted 9 June, 2021; originally announced June 2021.

Benchmarking Structured Policies and Policy Optimization for Real-World Dexterous Object Manipulation

Authors: Niklas Funk, Charles Schaff, Rishabh Madan, Takuma Yoneda, Julen Urain De Jesus, Joe Watson, Ethan K. Gordon, Felix Widmaier, Stefan Bauer, Siddhartha S. Srinivasa, Tapomayukh Bhattacharjee, Matthew R. Walter, Jan Peters

Abstract: Dexterous manipulation is a challenging and important problem in robotics. While data-driven methods are a promising approach, current benchmarks require simulation or extensive engineering support due to the sample inefficiency of popular methods. We present benchmarks for the TriFinger system, an open-source robotic platform for dexterous manipulation and the focus of the 2020 Real Robot Challen… ▽ More Dexterous manipulation is a challenging and important problem in robotics. While data-driven methods are a promising approach, current benchmarks require simulation or extensive engineering support due to the sample inefficiency of popular methods. We present benchmarks for the TriFinger system, an open-source robotic platform for dexterous manipulation and the focus of the 2020 Real Robot Challenge. The benchmarked methods, which were successful in the challenge, can be generally described as structured policies, as they combine elements of classical robotics and modern policy optimization. This inclusion of inductive biases facilitates sample efficiency, interpretability, reliability and high performance. The key aspects of this benchmarking is validation of the baselines across both simulation and the real system, thorough ablation study over the core features of each solution, and a retrospective analysis of the challenge as a manipulation benchmark. The code and demo videos for this work can be found on our website (https://sites.google.com/view/benchmark-rrc). △ Less

Submitted 8 December, 2021; v1 submitted 5 May, 2021; originally announced May 2021.

Journal ref: IEEE Robotics and Automation Letters 7 (2022) 478-485

Chemotactic smoothing of collective migration

Authors: Tapomoy Bhattacharjee, Daniel B. Amchin, Ricard Alert, J. A. Ott, Sujit S. Datta

Abstract: Collective migration -- the directed, coordinated motion of many self-propelled agents -- is a fascinating emergent behavior exhibited by active matter that has key functional implications for biological systems. Extensive studies have elucidated the different ways in which this phenomenon may arise. Nevertheless, how collective migration can persist when a population is confronted with perturbati… ▽ More Collective migration -- the directed, coordinated motion of many self-propelled agents -- is a fascinating emergent behavior exhibited by active matter that has key functional implications for biological systems. Extensive studies have elucidated the different ways in which this phenomenon may arise. Nevertheless, how collective migration can persist when a population is confronted with perturbations, which inevitably arise in complex settings, is poorly understood. Here, by combining experiments and simulations, we describe a mechanism by which collectively migrating populations smooth out large-scale perturbations in their overall morphology, enabling their constituents to continue to migrate together. We focus on the canonical example of chemotactic migration of Escherichia coli, in which fronts of cells move via directed motion, or chemotaxis, in response to a self-generated nutrient gradient. We identify two distinct modes in which chemotaxis influences the morphology of the population: cells in different locations along a front migrate at different velocities due to spatial variations in (i) the local nutrient gradient and in (ii) the ability of cells to sense and respond to the local nutrient gradient. While the first mode is destabilizing, the second mode is stabilizing and dominates, ultimately driving smoothing of the overall population and enabling continued collective migration. This process is autonomous, arising without any external intervention; instead, it is a population-scale consequence of the manner in which individual cells transduce external signals. Our findings thus provide insights to predict, and potentially control, the collective migration and morphology of cell populations and diverse other forms of active matter. △ Less

Submitted 12 January, 2021; originally announced January 2021.

Journal ref: eLife, 11, e71226 (2022)

Material Recognition via Heat Transfer Given Ambiguous Initial Conditions

Authors: Tapomayukh Bhattacharjee, Henry M. Clever, Joshua Wade, Charles C. Kemp

Abstract: Humans and robots can recognize materials with distinct thermal effusivities by making physical contact and observing temperatures during heat transfer. This works well with room temperature materials and humans and robots at human body temperatures. Past research has shown that cooling or heating a material can result in temperatures that are similar to contact with another material. To thoroughl… ▽ More Humans and robots can recognize materials with distinct thermal effusivities by making physical contact and observing temperatures during heat transfer. This works well with room temperature materials and humans and robots at human body temperatures. Past research has shown that cooling or heating a material can result in temperatures that are similar to contact with another material. To thoroughly investigate this perceptual ambiguity, we designed a psychophysical experiment in which a participant discriminates between two materials given ambiguous initial conditions. We conducted a study with 32 human participants and a robot. Humans and the robot confused the materials. We also found that robots can overcome this ambiguity using two temperature sensors with different temperatures prior to contact. We support this conclusion based on a mathematical proof using a heat transfer model and empirical results in which a robot achieved 100% accuracy compared to 5% human accuracy. Our results also indicate that robots can use subtle cues to distinguish thermally ambiguous materials with a single temperature sensor. Overall, our work provides insights into challenging conditions for material recognition via heat transfer, and suggests methods by which robots can overcome these challenges to outperform humans. △ Less

Submitted 3 December, 2020; originally announced December 2020.

Comments: 13 pages, 7 figures, supplementary material included

Grasping with Chopsticks: Combating Covariate Shift in Model-free Imitation Learning for Fine Manipulation

Authors: Liyiming Ke, Jingqiang Wang, Tapomayukh Bhattacharjee, Byron Boots, Siddhartha Srinivasa

Abstract: Billions of people use chopsticks, a simple yet versatile tool, for fine manipulation of everyday objects. The small, curved, and slippery tips of chopsticks pose a challenge for picking up small objects, making them a suitably complex test case. This paper leverages human demonstrations to develop an autonomous chopsticks-equipped robotic manipulator. Due to the lack of accurate models for fine m… ▽ More Billions of people use chopsticks, a simple yet versatile tool, for fine manipulation of everyday objects. The small, curved, and slippery tips of chopsticks pose a challenge for picking up small objects, making them a suitably complex test case. This paper leverages human demonstrations to develop an autonomous chopsticks-equipped robotic manipulator. Due to the lack of accurate models for fine manipulation, we explore model-free imitation learning, which traditionally suffers from the covariate shift phenomenon that causes poor generalization. We propose two approaches to reduce covariate shift, neither of which requires access to an interactive expert or a model, unlike previous approaches. First, we alleviate single-step prediction errors by applying an invariant operator to increase the data support at critical steps for grasping. Second, we generate synthetic corrective labels by adding bounded noise and combining parametric and non-parametric methods to prevent error accumulation. We demonstrate our methods on a real chopstick-equipped robot that we built, and observe the agent's success rate increase from 37.3% to 80%, which is comparable to the human expert performance of 82.6%. △ Less

Submitted 12 November, 2020; originally announced November 2020.

Comments: Submitted to ICRA 2021

Leveraging Post Hoc Context for Faster Learning in Bandit Settings with Applications in Robot-Assisted Feeding

Authors: Ethan K. Gordon, Sumegh Roychowdhury, Tapomayukh Bhattacharjee, Kevin Jamieson, Siddhartha S. Srinivasa

Abstract: Autonomous robot-assisted feeding requires the ability to acquire a wide variety of food items. However, it is impossible for such a system to be trained on all types of food in existence. Therefore, a key challenge is choosing a manipulation strategy for a previously unseen food item. Previous work showed that the problem can be represented as a linear bandit with visual context. However, food ha… ▽ More Autonomous robot-assisted feeding requires the ability to acquire a wide variety of food items. However, it is impossible for such a system to be trained on all types of food in existence. Therefore, a key challenge is choosing a manipulation strategy for a previously unseen food item. Previous work showed that the problem can be represented as a linear bandit with visual context. However, food has a wide variety of multi-modal properties relevant to manipulation that can be hard to distinguish visually. Our key insight is that we can leverage the haptic context we collect during and after manipulation (i.e., "post hoc") to learn some of these properties and more quickly adapt our visual model to previously unseen food. In general, we propose a modified linear contextual bandit framework augmented with post hoc context observed after action selection to empirically increase learning speed and reduce cumulative regret. Experiments on synthetic data demonstrate that this effect is more pronounced when the dimensionality of the context is large relative to the post hoc context or when the post hoc context model is particularly easy to learn. Finally, we apply this framework to the bite acquisition problem and demonstrate the acquisition of 8 previously unseen types of food with 21% fewer failures across 64 attempts. △ Less

Submitted 25 March, 2021; v1 submitted 4 November, 2020; originally announced November 2020.

Comments: 6 pages + references, 5 figures, to appear in ICRA 2021

Telemanipulation with Chopsticks: Analyzing Human Factors in User Demonstrations

Authors: Liyiming Ke, Ajinkya Kamat, Jingqiang Wang, Tapomayukh Bhattacharjee, Christoforos Mavrogiannis, Siddhartha S. Srinivasa

Abstract: Chopsticks constitute a simple yet versatile tool that humans have used for thousands of years to perform a variety of challenging tasks ranging from food manipulation to surgery. Applying such a simple tool in a diverse repertoire of scenarios requires significant adaptability. Towards developing autonomous manipulators with comparable adaptability to humans, we study chopsticks-based manipulatio… ▽ More Chopsticks constitute a simple yet versatile tool that humans have used for thousands of years to perform a variety of challenging tasks ranging from food manipulation to surgery. Applying such a simple tool in a diverse repertoire of scenarios requires significant adaptability. Towards developing autonomous manipulators with comparable adaptability to humans, we study chopsticks-based manipulation to gain insights into human manipulation strategies. We conduct a within-subjects user study with 25 participants, evaluating three different data-collection methods: normal chopsticks, motion-captured chopsticks, and a novel chopstick telemanipulation interface. We analyze factors governing human performance across a variety of challenging chopstick-based grasping tasks. Although participants rated teleoperation as the least comfortable and most difficult-to-use method, teleoperation enabled users to achieve the highest success rates on three out of five objects considered. Further, we notice that subjects quickly learned and adapted to the teleoperation interface. Finally, while motion-captured chopsticks could provide a better reflection of how humans use chopsticks, the teleoperation interface can produce quality on-hardware demonstrations from which the robot can directly learn. △ Less

Submitted 31 July, 2020; originally announced August 2020.

Comments: IROS 2020

Semi-supervised Grasp Detection by Representation Learning in a Vector Quantized Latent Space

Authors: Mridul Mahajan, Tryambak Bhattacharjee, Arya Krishnan, Priya Shukla, G C Nandi

Abstract: For a robot to perform complex manipulation tasks, it is necessary for it to have a good grasping ability. However, vision based robotic grasp detection is hindered by the unavailability of sufficient labelled data. Furthermore, the application of semi-supervised learning techniques to grasp detection is under-explored. In this paper, a semi-supervised learning based grasp detection approach has b… ▽ More For a robot to perform complex manipulation tasks, it is necessary for it to have a good grasping ability. However, vision based robotic grasp detection is hindered by the unavailability of sufficient labelled data. Furthermore, the application of semi-supervised learning techniques to grasp detection is under-explored. In this paper, a semi-supervised learning based grasp detection approach has been presented, which models a discrete latent space using a Vector Quantized Variational AutoEncoder (VQ-VAE). To the best of our knowledge, this is the first time a Variational AutoEncoder (VAE) has been applied in the domain of robotic grasp detection. The VAE helps the model in generalizing beyond the Cornell Grasping Dataset (CGD) despite having a limited amount of labelled data by also utilizing the unlabelled data. This claim has been validated by testing the model on images, which are not available in the CGD. Along with this, we augment the Generative Grasping Convolutional Neural Network (GGCNN) architecture with the decoder structure used in the VQ-VAE model with the intuition that it should help to regress in the vector-quantized latent space. Subsequently, the model performs significantly better than the existing approaches which do not make use of unlabelled images to improve the grasp. △ Less

Submitted 30 January, 2020; v1 submitted 23 January, 2020; originally announced January 2020.

Confinement and activity regulate bacterial motion in porous media

Authors: Tapomoy Bhattacharjee, Sujit S. Datta

Abstract: Understanding how bacteria move in porous media is critical to applications in healthcare, agriculture, environmental remediation, and chemical sensing. Recent work has demonstrated that E. coli, which moves by run-and-tumble dynamics in a homogeneous medium, exhibits a new form of motility when confined in a disordered porous medium: hopping-and-trapping motility, in which cells perform rapid, di… ▽ More Understanding how bacteria move in porous media is critical to applications in healthcare, agriculture, environmental remediation, and chemical sensing. Recent work has demonstrated that E. coli, which moves by run-and-tumble dynamics in a homogeneous medium, exhibits a new form of motility when confined in a disordered porous medium: hopping-and-trapping motility, in which cells perform rapid, directed hops punctuated by intervals of slow, undirected trapping. Here, we use direct visualization to shed light on how these processes depend on pore-scale confinement and cellular activity. We find that hopping is determined by pore-scale confinement, and is independent of cellular activity; by contrast, trapping is determined by the competition between pore-scale confinement and cellular activity, as predicted by an entropic trapping model. These results thus help to elucidate the factors that regulate bacterial motion in porous media, and could help aid the development of new models of motility in heterogeneous environments. △ Less

Submitted 6 October, 2019; originally announced October 2019.

Journal ref: Soft Matter, 15, 9920 (2019)

Adaptive Robot-Assisted Feeding: An Online Learning Framework for Acquiring Previously Unseen Food Items

Authors: Ethan K. Gordon, Xiang Meng, Matt Barnes, Tapomayukh Bhattacharjee, Siddhartha S. Srinivasa

Abstract: A successful robot-assisted feeding system requires bite acquisition of a wide variety of food items. It must adapt to changing user food preferences under uncertain visual and physical environments. Different food items in different environmental conditions require different manipulation strategies for successful bite acquisition. Therefore, a key challenge is how to handle previously unseen food… ▽ More A successful robot-assisted feeding system requires bite acquisition of a wide variety of food items. It must adapt to changing user food preferences under uncertain visual and physical environments. Different food items in different environmental conditions require different manipulation strategies for successful bite acquisition. Therefore, a key challenge is how to handle previously unseen food items with very different success rate distributions over strategy. Combining low-level controllers and planners into discrete action trajectories, we show that the problem can be represented using a linear contextual bandit setting. We construct a simulated environment using a doubly robust loss estimate from previously seen food items, which we use to tune the parameters of off-the-shelf contextual bandit algorithms. Finally, we demonstrate empirically on a robot-assisted feeding system that, even starting with a model trained on thousands of skewering attempts on dissimilar previously seen food items, $ε$-greedy and LinUCB algorithms can quickly converge to the most successful manipulation strategy. △ Less

Submitted 31 July, 2020; v1 submitted 19 August, 2019; originally announced August 2019.

Comments: To appear in IROS 2020; 8 pages incl. references, 8 figures; Abstract presented in IJCAI 2019 AIxFood Workshop; v3: Added simulation and experimental results for conference submission; v4: Added extra results to Experiment 2 for camera-ready submission

Study of radioactivity built-up and decay with singles time-stamped data

Authors: Sangeeta Das, Arkajyoti De, Balaram Dey, Sathi Sharma, Anik Adhikari, S. S. Alam, Arkabrata Gupta, Y. Sapkota, Ananya Das, A. Saha, Dibyadyuti Pramanik, T. Bhattacharjee, Abhijit Bisoi, S. Sarkar, M. Saha Sarkar

Abstract: Time-stamped data have been used to estimate the decay half-lives of radioactive 118mSb and 64,66,68Ga nuclei. These nuclei are populated through the reaction 4He (Elab = 32 MeV) + nat In and p (Elab = 10 MeV) + natZn, respectively. The g -rays emitted by the excited daughter nuclei are detected by a single high purity germanium (HPGe) detector and the data are acquired using a CAEN 5780M desktop… ▽ More Time-stamped data have been used to estimate the decay half-lives of radioactive 118mSb and 64,66,68Ga nuclei. These nuclei are populated through the reaction 4He (Elab = 32 MeV) + nat In and p (Elab = 10 MeV) + natZn, respectively. The g -rays emitted by the excited daughter nuclei are detected by a single high purity germanium (HPGe) detector and the data are acquired using a CAEN 5780M desktop digitizer. Half-lives of different orders of magnitudes for the above mentioned nuclei are obtained from both the decay of parent and the growth of daughter nuclei. It is observed that the half-lives obtained from both these techniques match fairly well and also are consistent with the reported values. It is demonstrated that the time-stamped data can be useful while studying certain half-lives which are too long for measurement using in-beam electronic technique and too short for decay studies in off-beam methods. The data also have a special relevance for constant monitoring of beam current and beam-tuning. △ Less

Submitted 13 July, 2019; originally announced July 2019.

Comments: 13 Pages, 4 figures

Robot-Assisted Feeding: Generalizing Skewering Strategies across Food Items on a Realistic Plate

Authors: Ryan Feng, Youngsun Kim, Gilwoo Lee, Ethan K. Gordon, Matt Schmittle, Shivaum Kumar, Tapomayukh Bhattacharjee, Siddhartha S. Srinivasa

Abstract: A robot-assisted feeding system must successfully acquire many different food items. A key challenge is the wide variation in the physical properties of food, demanding diverse acquisition strategies that are also capable of adapting to previously unseen items. Our key insight is that items with similar physical properties will exhibit similar success rates across an action space, allowing the rob… ▽ More A robot-assisted feeding system must successfully acquire many different food items. A key challenge is the wide variation in the physical properties of food, demanding diverse acquisition strategies that are also capable of adapting to previously unseen items. Our key insight is that items with similar physical properties will exhibit similar success rates across an action space, allowing the robot to generalize its actions to previously unseen items. To better understand which skewering strategy works best for each food item, we collected a dataset of 2450 robot bite acquisition trials for 16 food items with varying properties. Analyzing the dataset provided insights into how the food items' surrounding environment, fork pitch, and fork roll angles affect bite acquisition success. We then developed a bite acquisition framework that takes the image of a full plate as an input, segments it into food items, and then applies our Skewering-Position-Action network (SPANet) to choose a target food item and a corresponding action so that the bite acquisition success rate is maximized. SPANet also uses the surrounding environment features of food items to predict action success rates. We used this framework to perform multiple experiments on uncluttered and cluttered plates. Results indicate that our integrated system can successfully generalize skewering strategies to many previously unseen food items. △ Less

Submitted 6 September, 2019; v1 submitted 5 June, 2019; originally announced June 2019.

Comments: 16 pages

Bacterial hopping and trapping in porous media

Authors: Tapomoy Bhattacharjee, Sujit S. Datta

Abstract: Diverse processes--e.g. bioremediation, biofertilization, and microbial drug delivery--rely on bacterial migration in disordered, three-dimensional (3D) porous media. However, how pore-scale confinement alters bacterial motility is unknown due to the opacity of typical 3D media. As a result, models of migration are limited and often employ ad hoc assumptions. Here we reveal that the paradigm of ru… ▽ More Diverse processes--e.g. bioremediation, biofertilization, and microbial drug delivery--rely on bacterial migration in disordered, three-dimensional (3D) porous media. However, how pore-scale confinement alters bacterial motility is unknown due to the opacity of typical 3D media. As a result, models of migration are limited and often employ ad hoc assumptions. Here we reveal that the paradigm of run-and-tumble motility is dramatically altered in a porous medium. By directly visualizing individual Escherichia coli, we find that the cells are intermittently and transiently trapped as they navigate the pore space, exhibiting diffusive behavior at long time scales. The trapping durations and the lengths of "hops" between traps are broadly distributed, reminiscent of transport in diverse other disordered systems; nevertheless, we show that these quantities can together predict the long-time bacterial translational diffusivity. Our work thus provides a revised picture of bacterial motility in complex media and yields principles for predicting cellular migration. △ Less

Submitted 7 May, 2019; originally announced May 2019.

Journal ref: Nature Communications 10, 2075 (2019)

Coupling between two extreme excitation mode in weakly deformed $^{142}$Eu nucleus

Authors: Sajad Ali, S. Rajbanshi, Prithwijita Ray, Somnath Nag, Abhijit Bisoi, S. Saha, J. Sethi, T. Trivedi, T. Bhattacharjee, S. Bhattacharyya, S. Chattopadhyay, G. Gangopadhyay, G. Mukherjee, R. Palit, R. Raut, M. Saha Sarkar, A. K. Singh, A. Goswami

Abstract: Two opposite parity dipole bandlike structures DB I and DB II of $^{142}$Eu are investigated by the Indian National Gamma Array (INGA), using the fusion evaporation reaction $^{31}$P + $^{116}$Cd @ 148 MeV. The decreasing trend as well as magnitude of the measured $B(M1)$ and $B(E2)$ transition rates of the band DB II has been reproduced well within the shears mechanism with the principal axis cra… ▽ More Two opposite parity dipole bandlike structures DB I and DB II of $^{142}$Eu are investigated by the Indian National Gamma Array (INGA), using the fusion evaporation reaction $^{31}$P + $^{116}$Cd @ 148 MeV. The decreasing trend as well as magnitude of the measured $B(M1)$ and $B(E2)$ transition rates of the band DB II has been reproduced well within the shears mechanism with the principal axis cranking model calculations. This calculation reflects the fact that the maximum contribution of the angular momentum of the states in DB II has been generated from the magnetic rotation (MR) phenomenon. The enhanced $B(E1)$ rates of the connecting $E1$ transitions from the states of DB II to DB I are demanding the octupole correlation due to the involvement of the octupole driving pair of orbitals $π{h_{11/2}}$ and $π{d_{5/2}}$ as evident from the quasiparticle alignment ($i_{x}$), the experimental routhians (e$^{'}$) and the calculated neutron and proton quasiparticle energies against the rotational frequency ($ω$). △ Less

Submitted 29 May, 2018; originally announced May 2018.

Comments: 6 pages, 5 figures

Towards Robotic Feeding: Role of Haptics in Fork-based Food Manipulation

Authors: Tapomayukh Bhattacharjee, Gilwoo Lee, Hanjun Song, Siddhartha S. Srinivasa

Abstract: Autonomous feeding is challenging because it requires manipulation of food items with various compliance, sizes, and shapes. To understand how humans manipulate food items during feeding and to explore ways to adapt their strategies to robots, we collected a rich dataset of human trajectories by asking them to pick up food and feed it to a mannequin. From the analysis of the collected haptic and m… ▽ More Autonomous feeding is challenging because it requires manipulation of food items with various compliance, sizes, and shapes. To understand how humans manipulate food items during feeding and to explore ways to adapt their strategies to robots, we collected a rich dataset of human trajectories by asking them to pick up food and feed it to a mannequin. From the analysis of the collected haptic and motion signals, we demonstrate that humans adapt their control policies to accommodate to the compliance and shape of the food item being acquired. We propose a taxonomy of manipulation strategies for feeding to highlight such policies. As a first step to generate compliance-dependent policies, we propose a set of classifiers for compliance-based food categorization from haptic and motion signals. We compare these human manipulation strategies with fixed position-control policies via a robot. Our analysis of success and failure cases of human and robot policies further highlights the importance of adapting the policy to the compliance of a food item. △ Less

Submitted 24 February, 2019; v1 submitted 23 April, 2018; originally announced April 2018.

Comments: 8 pages

Journal ref: IEEE Robotics and Automation Letters, Volume: 4 , Issue: 2 , Page(s): 1485 - 1492, April 2019

Spectroscopic Criteria for Identification of Nuclear Tetrahedral and Octahedral Symmetries: Illustration on a Rare Earth Nucleus

Authors: J. Dudek, D. Curien, I. Dedes, K. Mazurek, S. Tagami, Y. R. Shimizu, T. Bhattacharjee

Abstract: We formulate criteria for identification of the nuclear tetrahedral and octahedral symmetries and illustrate for the first time their possible realization in a Rare Earth nucleus 152Sm. We use realistic nuclear mean-field theory calculations with the phenomenological macroscopic-microscopic method, the Gogny-Hartree-Fock-Bogoliubov approach and the general point-group theory considerations to guid… ▽ More We formulate criteria for identification of the nuclear tetrahedral and octahedral symmetries and illustrate for the first time their possible realization in a Rare Earth nucleus 152Sm. We use realistic nuclear mean-field theory calculations with the phenomenological macroscopic-microscopic method, the Gogny-Hartree-Fock-Bogoliubov approach and the general point-group theory considerations to guide the experimental identification method as illustrated on published experimental data. Following group-theory the examined symmetries imply the existence of exotic rotational bands on whose properties the spectroscopic identification criteria are based. These bands may contain simultaneously states of even and odd spins, of both parities and parity doublets at well defined spins. In the exact-symmetry limit those bands involve no E2-transitions. We show that coexistence of tetrahedral and octahedral deformations is essential when calculating the corresponding energy minima and surrounding barriers and that it has a characteristic impact on the rotational bands. The symmetries in question imply the existence of long-lived shape-isomers and, possibly, new waiting point nuclei -- impacting the nucleosynthesis processes in astrophysics -- and an existence of 16-fold degenerate particle-hole excitations. Specifically designed experiments which aim at strengthening the identification arguments are briefly discussed. △ Less

Submitted 5 March, 2018; v1 submitted 8 February, 2018; originally announced February 2018.

Comments: 6 pages, 5 figures

Analyzing Material Recognition Performance of Thermal Tactile Sensing using a Large Materials Database and a Real Robot

Authors: Haoping Bai, Haofeng Chen, Elizabeth Healy, Charles C. Kemp, Tapomayukh Bhattacharjee

Abstract: In this paper we focus on analyzing the thermal modality of tactile sensing for material recognition using a large materials database. Many factors affect thermal recognition performance, including sensor noise, the initial temperatures of the sensor and the object, the thermal effusivities of the materials, and the duration of contact. To analyze the influence of these factors on thermal recognit… ▽ More In this paper we focus on analyzing the thermal modality of tactile sensing for material recognition using a large materials database. Many factors affect thermal recognition performance, including sensor noise, the initial temperatures of the sensor and the object, the thermal effusivities of the materials, and the duration of contact. To analyze the influence of these factors on thermal recognition, we used a semi-infinite solid based thermal model to simulate heat-transfer data from all the materials in the CES Edupack Level-1 database. We used support-vector machines (SVMs) to predict F1 scores for binary material recognition for 2346 material pairs. We also collected data using a real robot equipped with a thermal sensor and analyzed its material recognition performance on 66 real-world material pairs. Additionally, we analyzed the performance when the models were trained on the simulated data and tested on the real-robot data. Our models predicted the material recognition performance with a 0.980 F1 score for the simulated data, a 0.994 F1 score for real-world data with constant initial sensor temperatures, a 0.966 F1 score for real-world data with varied initial sensor temperatures, and a 0.815 F1 score for sim-to-real transfer. Finally, we present some guidelines on sensor design and parameter choice for thermal recognition based on the insights gained from these results that would hopefully enable robotics researchers to use this less-explored tactile sensing modality more effectively during physical human-robot and robot-object interactions. We release our simulated and real-robot datasets for further use by the robotics community. △ Less

Submitted 1 November, 2022; v1 submitted 4 November, 2017; originally announced November 2017.

Comments: Published in IEEE ROBIO 2022

Evidence of the Antimagnetic rotation in an odd-odd nucleus: The case of 142Eu

Authors: Sajad Ali, S. Rajbanshi, B. Das, S. Chattopadhyay, M. Saha Sarkar, A. Goswami, R. Raut, Abhijit Bisoi, Somnath Nag, S. Saha, J. Sethi, R. Palit, G. Gangopadhyay, T. Bhattacharjee, S. Bhattacharyya, G. Mukherjee, A. K. Singh, T. Trivedi

Abstract: The present work reported a conclusive evidence for anti-magnetic rotational (AMR) band in an odd-odd nucleus 142Eu. Parity of the states of a quadrupole sequence in 142Eu was firmly identified from polarization measurements using the Indian National Gamma Array and lifetimes of some of the states in the same structure were measured using the Doppler shift attenuation method. The decreasing trends… ▽ More The present work reported a conclusive evidence for anti-magnetic rotational (AMR) band in an odd-odd nucleus 142Eu. Parity of the states of a quadrupole sequence in 142Eu was firmly identified from polarization measurements using the Indian National Gamma Array and lifetimes of some of the states in the same structure were measured using the Doppler shift attenuation method. The decreasing trends of the deduced quadrupole transition strength B(E2) with spin, along with increasing J(2) / B(E2) values conclusively established the origin of these states as arising from Antimagnetic rotation. The results were well reproduced by numerical calculations within the framework of a semi-classical geometric model. △ Less

Submitted 14 July, 2017; originally announced July 2017.

Journal ref: Phys. Rev. C 96, 021304 (2017)

Identification of a long lived $β$ decaying isomer in $^{150}$Pm

Authors: A. Saha, T. Bhattacharjee, D. Banerjee, S. S. Alam, Deepak Pandit, M. Saha Sarkar, S. Sarkar, P. Das, Soumik Bhattacharya, R. Guin, S. K. Das, S. R. Banerjee

Abstract: The decay of odd-odd $^{150}$Pm has been studied by populating the nucleus with the $^{150}$Nd(p,n)$^{150}$Pm reaction at E$_{beam}$ = 8.0 MeV using 97$\%$ enriched $^{150}$Nd target. The presence of an isomeric state with $β$ decay half life of 2.2(1) h could be identified in $^{150}$Pm by following the half lives of the observed $γ$ transitions. The decay of the isomer to the excited levels of… ▽ More The decay of odd-odd $^{150}$Pm has been studied by populating the nucleus with the $^{150}$Nd(p,n)$^{150}$Pm reaction at E$_{beam}$ = 8.0 MeV using 97$\%$ enriched $^{150}$Nd target. The presence of an isomeric state with $β$ decay half life of 2.2(1) h could be identified in $^{150}$Pm by following the half lives of the observed $γ$ transitions. The decay of the isomer to the excited levels of $^{150}$Sm has been confirmed by observing the $γ- γ$ coincidence with the VENUS array of six Compton suppressed Clover HPGe detectors. The $β$ decay end-point energies corresponding to the decay from the $^{150g}$Pm and $^{150m}$Pm have been measured using a $β-γ$ coincidence setup of two thin window Planar HPGe detectors and four Clover HPGe detectors of the VENUS array. The systematics of the similar isomeric states in neighboring nuclei has been studied to understand the underlying structure of these states. Shell model calculation has been performed by using OXBASH code which indicates the presence of a 5$^-$ isomeric state at very low excitation in the nucleus. The calculation also suggests hindered electromagnetic decay of this isomer and supports the possibility of its $β$ decay to the excited levels of $^{150}$Sm. △ Less

Submitted 29 June, 2017; originally announced June 2017.

Comments: 15 pages, 13 figures

A Handheld Device for the In Situ Acquisition of Multimodal Tactile Sensing Data

Authors: Joshua Wade, Tapomayukh Bhattacharjee, Charles C. Kemp

Abstract: Multimodal tactile sensing could potentially enable robots to improve their performance at manipulation tasks by rapidly discriminating between task-relevant objects. Data-driven approaches to this tactile perception problem show promise, but there is a dearth of suitable training data. In this two-page paper, we present a portable handheld device for the efficient acquisition of multimodal tactil… ▽ More Multimodal tactile sensing could potentially enable robots to improve their performance at manipulation tasks by rapidly discriminating between task-relevant objects. Data-driven approaches to this tactile perception problem show promise, but there is a dearth of suitable training data. In this two-page paper, we present a portable handheld device for the efficient acquisition of multimodal tactile sensing data from objects in their natural settings, such as homes. The multimodal tactile sensor on the device integrates a fabric-based force sensor, a contact microphone, an accelerometer, temperature sensors, and a heating element. We briefly introduce our approach, describe the device, and demonstrate feasibility through an evaluation with a small data set that we captured by making contact with 7 task-relevant objects in a bathroom of a person's home. △ Less

Submitted 12 November, 2015; v1 submitted 10 November, 2015; originally announced November 2015.

Comments: This short 2-page paper was accepted and presented as a poster (https://goo.gl/8TqDTK) on Sep. 28, 2015 in IROS 2015 Workshop on 'See and Touch: 1st Workshop on multimodal sensor-based robot control for HRI and soft manipulation" organized by A. Cherubini, Y. Mezouar, D. Navarro-Alarcon, M. Prats, and J. A. Corrales Ramon. It was peer reviewed by 2 reviewers

Antimagnetic rotation and sudden change of electric quadrupole transition strength in 143Eu

Authors: S. Rajbanshi, S. Roy, Somnath Nag, Abhijit Bisoi, S. Saha, J. Sethi, T. Trivedi, T. Bhattacharjee, S. Bhattacharyya, S. Chattopadhyay, G. Gangopadhyay, G. Mukherjee, R. Palit, R. Raut, M. Saha Sarkar, A. K. Singh, A. Goswami

Abstract: Lifetimes of the states in the quadrupole structure in 143Eu have been measured using the Doppler shift attenuation method as well as parity of the states in the sequence has been firmly identified from polarization measurement using the Indian National Gamma Array. The decreasing trends of the deduced quadrupole transition strength B(E2) with spin, along with increasing J (2) /B(E2) values before… ▽ More Lifetimes of the states in the quadrupole structure in 143Eu have been measured using the Doppler shift attenuation method as well as parity of the states in the sequence has been firmly identified from polarization measurement using the Indian National Gamma Array. The decreasing trends of the deduced quadrupole transition strength B(E2) with spin, along with increasing J (2) /B(E2) values before band crossing, conclusively establish the origin of these states as arising out of antimagnetic rotation. The abrupt increase in the B(E2) values after the band crossing in the quadrupole band, a novel feature observed in the present experiment, may indicates the crossing of different shears configurations resulting in re-opening of shears structure. The results are well reproduced by numerical calculation within the framework of semi-classical geometric model. △ Less

Submitted 22 May, 2015; originally announced May 2015.

Comments: 6 pages, 4 postscript figures

Role of p-induced population of medium mass(A $\sim$ 150) neutron rich nuclei

Authors: D. Banerjee, A. Saha, T. Bhattacharjee, R. Guin, S. K. Das, P. Das, Deepak Pandit, A. Mukherjee, A. Chowdhury, Soumik Bhattacharya, S. Das Gupta, S. Bhattacharyya, P. Mukhopadhyay, S. R. Banerjee

Abstract: Excitation functions were measured by stacked-foil activation technique for the $^{150}$Nd(p, xpyn) reaction using 97.65$%$ enriched $^{150}$Nd target. Measurement up to $\sim$50$%$ above barrier and down to 18$%$ below the barrier was performed using proton beam energy (E$_p$) of 7 - 15 MeV from VECC Cyclotron. The yield of suitable $γ$ rays emitted following the decay of relevant evaporation res… ▽ More Excitation functions were measured by stacked-foil activation technique for the $^{150}$Nd(p, xpyn) reaction using 97.65$%$ enriched $^{150}$Nd target. Measurement up to $\sim$50$%$ above barrier and down to 18$%$ below the barrier was performed using proton beam energy (E$_p$) of 7 - 15 MeV from VECC Cyclotron. The yield of suitable $γ$ rays emitted following the decay of relevant evaporation residues was determined using a 50$%$ High Purity Germanium (HPGe) detector.(p,n) cross section was found to follow the expected trend with a maximum value of 63.7(4.9)mb at E$_p$ $\sim$ 8.6 MeV. (p,2n) cross section gradually increased with E$_p$ and had maximum contribution to the total reaction cross section after E$_p$ $\sim$ 9.0 MeV. (p, p$^{\prime}$n) reaction channel also showed a reasonable yield with a threshold of E$_p$ $\sim$ 12.0 MeV. The experimental data were corroborated with statistical model calculations using different codes, viz., CASCADE, ALICE/91 and EMPIRE3.1. All the calculations using a suitable set of global parameters could reproduce the excitation function fairly well in the present energy range. △ Less

Submitted 24 December, 2014; originally announced December 2014.

Inferring Object Properties with a Tactile Sensing Array Given Varying Joint Stiffness and Velocity

Authors: Tapomayukh Bhattacharjee, James M. Rehg, Charles C. Kemp

Abstract: Whole-arm tactile sensing enables a robot to sense contact and infer contact properties across its entire arm. Within this paper, we demonstrate that using data-driven methods, a humanoid robot can infer mechanical properties of objects from contact with its forearm during a simple reaching motion. A key issue is the extent to which the performance of data-driven methods can generalize to robot ac… ▽ More Whole-arm tactile sensing enables a robot to sense contact and infer contact properties across its entire arm. Within this paper, we demonstrate that using data-driven methods, a humanoid robot can infer mechanical properties of objects from contact with its forearm during a simple reaching motion. A key issue is the extent to which the performance of data-driven methods can generalize to robot actions that differ from those used during training. To investigate this, we developed an idealized physics-based lumped element model of a robot with a compliant joint making contact with an object. Using this physics-based model, we performed experiments with varied robot, object and environment parameters. We also collected data from a tactile-sensing forearm on a real robot as it made contact with various objects during a simple reaching motion with varied arm velocities and joint stiffnesses. The robot used one nearest neighbor classifiers (1-NN), hidden Markov models (HMMs), and long short-term memory (LSTM) networks to infer two object properties (hard vs. soft and moved vs. unmoved) based on features of time-varying tactile sensor data (maximum force, contact area, and contact motion). We found that, in contrast to 1-NN, the performance of LSTMs (with sufficient data availability) and multivariate HMMs successfully generalized to new robot motions with distinct velocities and joint stiffnesses. Compared to single features, using multiple features gave the best results for both experiments with physics-based models and a real-robot. △ Less

Submitted 4 November, 2017; v1 submitted 17 September, 2014; originally announced September 2014.

Comments: This updated version [v2] was accepted to the International Journal of Humanoid Robotics, Special Issue on Tactile Sensing for Manipulation : New Progress and Challenges

Crossing of large multiquasiparticle magnetic-rotation bands in $^{198}$Bi

Authors: H. Pai, G. Mukherjee, S. Bhattacharyya, C. Bhattacharya, S. Bhattacharya, T. Bhattacharjee, S. K. Basu, S. Kundu, T. K. Ghosh, K. Banerjee, T. K. Rana, J. K. Meena, R. K. Bhowmik, R. P. Singh, S. Muralithar, S. Chanda, R. Garg, B. Maheshwari, D. Choudhury, A. K. Jain

Abstract: High-spin states in the doubly-odd $^{198}$Bi nucleus have been studied by using the $^{185,187}$Re($^{16}$O, xn) reactions at the beam energy of 112.5 MeV. $γ-γ$ coincidence were measured by using the INGA array with 15 Compton suppressed clover HPGe detectors. The observed levels have been assigned definite spin-parity. The high spin structure is grouped into three bands (B1, B2 and B3), of whic… ▽ More High-spin states in the doubly-odd $^{198}$Bi nucleus have been studied by using the $^{185,187}$Re($^{16}$O, xn) reactions at the beam energy of 112.5 MeV. $γ-γ$ coincidence were measured by using the INGA array with 15 Compton suppressed clover HPGe detectors. The observed levels have been assigned definite spin-parity. The high spin structure is grouped into three bands (B1, B2 and B3), of which two (B1 and B2) exhibit the properties of magnetic rotation (MR). Tilted axis cranking calculations were carried out to explain the MR bands having large multi-quasiparticle configurations. The calculated results explain the bands B1 and B2 very nicely, confirming the shears mechanism and suggest a crossing of two MR bands in both the cases. The crossing is from 6-qp to 8-qp in band B1 and from 4-qp to 6-qp in band B2, a very rare finding. A semiclassical model has also been used to obtain the particle-hole interaction strengths for the bands B1 and B2, below the band crossing. △ Less

Submitted 22 December, 2014; v1 submitted 20 June, 2014; originally announced June 2014.

Comments: Published as a Regular Article in Physical Review C

Journal ref: Phys. Rev. C 90, 064314 (2014)

Measurement of $β$-decay end point energy with Planar HPGe detector

Authors: T. Bhattacharjee, Deepak Pandit, S. K. Das, A. Chowdhury, P. Das, D. Banerjee, A. Saha, S. Mukhopadhyay, S. Pal, S. R. Banerjee

Abstract: The end point energies of nuclear $β$ decays have been measured with a segmented planar Ge LEPS detector using both singles and coincidence techniques. The $β- γ$ coincidence has been performed with a segmented planar Ge LEPS and a single 10$\%$ HPGe detector. The $γ$ ray and $β$ particle responses of the Segmented planer Ge LEPS detector were studied using monte carlo simulation code GEANT3. The… ▽ More The end point energies of nuclear $β$ decays have been measured with a segmented planar Ge LEPS detector using both singles and coincidence techniques. The $β- γ$ coincidence has been performed with a segmented planar Ge LEPS and a single 10$\%$ HPGe detector. The $γ$ ray and $β$ particle responses of the Segmented planer Ge LEPS detector were studied using monte carlo simulation code GEANT3. The experimentally obtained $β$ spectrum was in reasonably good agreement with the simulation results. The experimental end point energies are determined with substantial accuracy for some of the known $β$ decays in $^{106}$Rh, $^{210}$Bi and $^{90}$Y. The end point energies corresponding to three weak branches in $^{106}$Rh $\rightarrow$ $^{106}$Pd decay has been measured for the first time. △ Less

Submitted 16 April, 2014; originally announced April 2014.

Comments: 12 pages, 8 figures and 1 table

Validation of a Control Algorithm for Human-like Reaching Motion using 7-DOF Arm and 19-DOF Hand-Arm Systems

Authors: Tapomayukh Bhattacharjee, Yonghwan Oh, Sang-Rok Oh

Abstract: This technical report gives an overview of our work on control algorithms dealing with redundant robot systems for achieving human-like motion characteristics. Previously, we developed a novel control law to exhibit human-motion characteristics in redundant robot arm systems as well as arm-trunk systems for reaching tasks [1], [2]. This newly developed method nullifies the need for the computation… ▽ More This technical report gives an overview of our work on control algorithms dealing with redundant robot systems for achieving human-like motion characteristics. Previously, we developed a novel control law to exhibit human-motion characteristics in redundant robot arm systems as well as arm-trunk systems for reaching tasks [1], [2]. This newly developed method nullifies the need for the computation of pseudo-inverse of Jacobian while the formulation and optimization of any artificial performance index is not necessary. The time-varying properties of the muscle stiffness and damping as well as the low-pass filter characteristics of human muscles have been modeled by the proposed control law to generate human-motion characteristics for reaching motion like quasi-straight line trajectory of the end-effector and symmetric bell shaped velocity profile. This report focuses on the experiments performed using a 7-DOF redundant robot-arm system which proved the effectiveness of this algorithm in imitating human-like motion characteristics. In addition, we extended this algorithm to a 19-DOF Hand-Arm System for a reach-to-grasp task. Simulations using the 19-DOF Hand-Arm System show the effectiveness of the proposed scheme for effective human-like hand-arm coordination in reach-to-grasp tasks for pinch and envelope grasps on objects of different shapes such as a box, a cylinder, and a sphere. △ Less

Submitted 4 November, 2013; originally announced November 2013.

Comments: This paper summarizes our work on the validation of a control algorithm for human-like reaching motion. This work was done at the Interaction and Robotics Research Center in Korea Institute of Science and Technology (KIST), South-Korea during 2010-2011

Non-linear Task-Space Disturbance Observer for Position Regulation of Redundant Robot Arms against Perturbations in 3D Environments

Authors: Tapomayukh Bhattacharjee, Yonghwan Oh, Sang-Rok Oh

Abstract: Many day-to-day activities require the dexterous manipulation of a redundant humanoid arm in complex 3D environments. However, position regulation of such robot arm systems becomes very difficult in presence of non-linear uncertainties in the system. Also, perturbations exist due to various unwanted interactions with obstacles for clumsy environments in which obstacle avoidance is not possible, an… ▽ More Many day-to-day activities require the dexterous manipulation of a redundant humanoid arm in complex 3D environments. However, position regulation of such robot arm systems becomes very difficult in presence of non-linear uncertainties in the system. Also, perturbations exist due to various unwanted interactions with obstacles for clumsy environments in which obstacle avoidance is not possible, and this makes position regulation even more difficult. This report proposes a non-linear task-space disturbance observer by virtue of which position regulation of such robotic systems can be achieved in spite of such perturbations and uncertainties. Simulations are conducted using a 7-DOF redundant robot arm system to show the effectiveness of the proposed method. These results are then compared with the case of a conventional mass-damper based task-space disturbance observer to show the enhancement in performance using the developed concept. This proposed method is then applied to a controller which exhibits human-like motion characteristics for reaching a target. Arbitrary perturbations in the form of interactions with obstacles are introduced in its path. Results show that the robot end-effector successfully continues to move in its path of a human-like quasi-straight trajectory even if the joint trajectories deviated by a considerable amount due to the perturbations. These results are also compared with that of the unperturbed motion of the robot which further prove the significance of the developed scheme. △ Less

Submitted 2 November, 2013; originally announced November 2013.

Comments: This paper summarizes our work on the formulation of a Non-linear Task-Space Disturbance Observer for Redundant Robot Arms. This work was done at the Interaction and Robotics Research Center in Korea Institute of Science and Technology (KIST), South-Korea during 2010-2011

Band structures and intruder $π$$i_{13/2}$ state in $^{197}$Tl

Authors: H. Pai, G. Mukherjee, S. Bhattacharya, C. Bhattacharya, S. Bhattacharyya, T. Bhattacharjee, S. Chanda, S. Rajbanshi, A. Goswami, M. R. Gohil, S. Kundu, T. K. Ghosh, K. Banerjee, T. K. Rana, R. Pandey, G. K. Prajapati, S. R. Banerjee, S. Mukhopadhyay, D. Pandit, S. Pal, J. K. Meena, P. Mukhopadhyay, A. Chawdhury

Abstract: The excited states in the odd-$A$ $^{197}$Tl nucleus have been studied by populating them using the $^{197}$Au($α$, 4$n$)$^{197}$Tl reaction at the beam energy of 48 MeV. The $γ-γ$ coincidence data were taken using a combination of clover, LEPS and single crystal HPGe detectors. Precise spin and parity assignments of the excited states have been done through the polarization and the DCO measuremen… ▽ More The excited states in the odd-$A$ $^{197}$Tl nucleus have been studied by populating them using the $^{197}$Au($α$, 4$n$)$^{197}$Tl reaction at the beam energy of 48 MeV. The $γ-γ$ coincidence data were taken using a combination of clover, LEPS and single crystal HPGe detectors. Precise spin and parity assignments of the excited states have been done through the polarization and the DCO measurements. A new band structure has been identified and the evidence for a possible intruder $πi_{13/2}$ state has been found for the first time. Possible configurations of the observed bands have been discussed. The total Routhian surface calculations have been performed to study the shape of $^{197}$Tl for different configurations. △ Less

Submitted 8 November, 2013; v1 submitted 8 July, 2013; originally announced July 2013.

Comments: Accepted for publication in PRC