-
Wetting on Silicone Surfaces
Authors:
Lukas Hauer,
Abhinav Naga,
Rodrique G. M. Badr,
Jonathan T. Pham,
William S. Y. Wong,
Doris Vollmer
Abstract:
Silicone is frequently used as a model system to investigate and tune wetting on soft materials. Silicone is biocompatible and shows excellent thermal, chemical, and UV stability. Moreover, the mechanical properties of the surface can be easily varied by several orders of magnitude in a controlled manner. Polydimethylsiloxane (PDMS) is a popular choice for coating applications such as lubrication,…
▽ More
Silicone is frequently used as a model system to investigate and tune wetting on soft materials. Silicone is biocompatible and shows excellent thermal, chemical, and UV stability. Moreover, the mechanical properties of the surface can be easily varied by several orders of magnitude in a controlled manner. Polydimethylsiloxane (PDMS) is a popular choice for coating applications such as lubrication, self-cleaning, and drag reduction, facilitated by low surface energy. Aiming to understand the underlying interactions and forces, motivated numerous and detailed investigations of the static and dynamic wetting behavior of drops on PDMS-based surfaces. Here, we recognize the three most prevalent PDMS surface variants, namely liquid-infused (SLIPS/LIS), elastomeric, and liquid-like (SOCAL) surfaces. To understand, optimize, and tune the wetting properties of these PDMS surfaces, we review and compare their similarities and differences by discussing (i) the chemical and molecular structure, and (ii) the static and dynamic wetting behavior. We also provide (iii) an overview of methods and techniques to characterize PDMS-based surfaces and their wetting behavior. The static and dynamic wetting ridge is given particular attention, as it dominates energy dissipation, adhesion, and friction of sliding drops and influences the durability of the surfaces. We also discuss special features such as cloaking and wetting-induced phase separation. Key challenges and opportunities of these three surface variants are outlined.
△ Less
Submitted 1 July, 2024; v1 submitted 8 April, 2024;
originally announced April 2024.
-
Cloaking Transition of Droplets on Lubricated Brushes
Authors:
Rodrique G. M. Badr,
Lukas Hauer,
Doris Vollmer,
Friederike Schmid
Abstract:
We study the equilibrium properties and the wetting behavior of a simple liquid on a polymer brush, with and without presence of lubricant by multibody Dissipative Particle Dynamics simulations. The lubricant is modelled as a polymeric liquid consisting of short chains that are chemically identical to the brush polymers. We investigate the behavior of the brush in terms of the grafting density and…
▽ More
We study the equilibrium properties and the wetting behavior of a simple liquid on a polymer brush, with and without presence of lubricant by multibody Dissipative Particle Dynamics simulations. The lubricant is modelled as a polymeric liquid consisting of short chains that are chemically identical to the brush polymers. We investigate the behavior of the brush in terms of the grafting density and the amount of lubricant present. Regarding the wetting behavior, we study a sessile droplet on top of the brush. The droplet consists of non-bonded particles that form a dense phase. Our model and choice of parameters result in the formation of a wetting ridge and in the cloaking of the droplet by the lubricant, i.e. the lubricant chains creep up onto the droplet and eventually cover its surface completely. Cloaking is a phenomenon that is observed experimentally and is of integral importance to the dynamics of sliding droplets. We quantify the cloaking in terms of its thickness, which increases with the amount of lubricant present. The analysis reveals a well-defined transition point where the cloaking sets in. We propose a thermodynamic theory to explain this behavior. In addition we investigate the dependence of the contact angles on the size of the droplet and the possible effect of line tension. We quantify the variation of the contact angle with the curvature of the contact line on a lubricant free brush and find a negative value for the line tension. Finally we investigate the effect of cloaking/lubrication on the contact angles and the wetting ridge. We find that lubrication and cloaking reduce the contact angles by a couple of degrees. The effect on the wetting ridge is a reduction in the extension of the brush chains near the three phase contact line, an effect that was also observed in experiments of droplets on crosslinked gels.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Dynamics of Droplets Moving on Lubricated Polymer Brushes
Authors:
Rodrique G. M. Badr,
Lukas Hauer,
Doris Vollmer,
Friederike Schmid
Abstract:
Understanding the dynamics of drops on polymer-coated surfaces is crucial for optimizing applications such as self-cleaning materials or microfluidic devices. While the static and dynamic properties of deposited drops have been well characterised, a microscopic understanding of the underlying dynamics is missing. In particular, it is unclear how drop dynamics depends on the amount of uncrosslinked…
▽ More
Understanding the dynamics of drops on polymer-coated surfaces is crucial for optimizing applications such as self-cleaning materials or microfluidic devices. While the static and dynamic properties of deposited drops have been well characterised, a microscopic understanding of the underlying dynamics is missing. In particular, it is unclear how drop dynamics depends on the amount of uncrosslinked chains in the brush, because experimental techniques fail to quantify those. Here we use coarse-grained simulations to study droplets moving on a lubricated polymer brush substrate under the influence of an external body force. The simulation model is based on the many body dissipative particle dynamics (mDPD) method and designed to mimic a system of water droplets on polydimethylsiloxane (PDMS) brushes with chemically identical PDMS lubricant. In agreement with experiments, we find a sublinear power law dependence between the external force $F$ and the droplet velocity $v$, $F \propto v^α$ with $α<1$; however, the exponents differ ($α\sim 0.6-0.7$ in simulations versus $α\sim 0.25$ in experiments). With increasing velocity, the droplets elongate and the receding contact angle decreases, whereas the advancing contact angle remains roughly constant. Analyzing the flow profiles inside the droplet reveals that the droplets do not slide, but roll, with vanishing slip at the substrate surface. Surprisingly, adding lubricant has very little effect on the effective friction force between the droplet and the substrate, even though it has a pronounced effect on the size and structure of the wetting ridge, especially above the cloaking transition.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.