-
Breakup of viscous liquid bridges on solid surfaces
Authors:
Salar Farokhi,
Peyman Rostami,
Günter K. Auernhammer,
Steffen Hardt
Abstract:
The breakup dynamics of viscous liquid bridges on solid surfaces is studied experimentally. It is found that the dynamics bears similarities to the breakup of free liquid bridges in the viscous regime. Nevertheless, the dynamics is significantly influenced by the wettability of the solid substrate. Therefore, it is essential to take into account the interaction between the solid and the liquid, es…
▽ More
The breakup dynamics of viscous liquid bridges on solid surfaces is studied experimentally. It is found that the dynamics bears similarities to the breakup of free liquid bridges in the viscous regime. Nevertheless, the dynamics is significantly influenced by the wettability of the solid substrate. Therefore, it is essential to take into account the interaction between the solid and the liquid, especially at the three-phase contact line. It is shown that when the breakup velocity is low and the solid surface is hydrophobic, the dominant channel of energy dissipation is likely due to thermally activated jumping of molecules, as described by the Molecular Kinetic Theory. Nevertheless, the viscous dissipation in the bulk due to axial flow along the bridge can be of importance for long bridges. In view of this, a scaling relation for the time dependence of the minimum width of the liquid bridge is derived. For high viscosities, the scaling relation captures the time evolution of the minimum width very well. Furthermore, it is found that external geometrical constraints alter the dynamic behavior of low and high viscosity liquid bridges in a different fashion. This discrepancy is explained by considering the dominant forces in each regime. Lastly, the morphology of the satellite droplets deposited on the surface is qualitatively compared to that of free liquid bridges.
△ Less
Submitted 3 August, 2024;
originally announced August 2024.
-
Spreading of a viscoelastic drop on a solid substrate
Authors:
Peyman Rostami,
Mathis Fricke,
Simon Schubotz,
Himanshu Patel,
Reza Azizmalayeri,
Güunter K. Auernhammer
Abstract:
We study the spreading of viscous and viscoelastic drops on solid substrates with different wettability. In the early stages of spreading, we find that the viscoelastic drop spreads with faster and a different power law than the Newtonian drop (i.e. aqueous glycerine solution) for the same zero shear rate viscosity. We argue that the effect of viscoelasticity is only observable for experimental ti…
▽ More
We study the spreading of viscous and viscoelastic drops on solid substrates with different wettability. In the early stages of spreading, we find that the viscoelastic drop spreads with faster and a different power law than the Newtonian drop (i.e. aqueous glycerine solution) for the same zero shear rate viscosity. We argue that the effect of viscoelasticity is only observable for experimental time scales in the order of the internal relaxation time of the polymer solution or longer times. Near the contact line, the effective viscosity is lower for the viscoelastic drop than for the Newtonian drop. Together with its shear rate dependency, this difference in effective viscosity can explain the different spreading dynamics. We support our experimental findings with a simple perturbation model that qualitatively agrees with our findings.
△ Less
Submitted 29 August, 2023; v1 submitted 28 August, 2023;
originally announced August 2023.
-
How droplets dry on stretched soft substrates
Authors:
Yixuan Du,
Elmar Bonaccurso,
Jianwei Guo,
Kai Uhlig,
Longquan Chen,
Binyu Zhao,
Günter K. Auernhammer
Abstract:
Liquid droplets usually wet smooth and homogeneous substrates isotropically. Recent research works have revealed that droplets sit, slide and spread anisotropically on uniaxially stretched soft substrates, showing an enhanced wettability and contact line mobility along the stretching direction. This phenomenon arises from the anisotropic deformation of the substrate below the contact line. Here, w…
▽ More
Liquid droplets usually wet smooth and homogeneous substrates isotropically. Recent research works have revealed that droplets sit, slide and spread anisotropically on uniaxially stretched soft substrates, showing an enhanced wettability and contact line mobility along the stretching direction. This phenomenon arises from the anisotropic deformation of the substrate below the contact line. Here, we investigate how the stretching of soft substrates affects droplets drying. We observe that water droplet evaporates with an elongated non-circular contact line on the stretched substrates and switches the elongation direction during evaporation. The contact line velocity and its temporal evolution depend on the orientation of the contact line relative to the stretching direction. On the substrate stretched by 250%, the contact line recedes about 20% of the droplet lifetime earlier along the stretching direction and faster than its perpendicular direction. When nanoparticles are added into the liquid, the circular deposition pattern, i.e., the so-called coffee-ring, becomes elongated along the direction perpendicular to the stretching direction. Particularly, such non-circular deposition pattern exhibits periodic height gradients along its rim. The finer structure of the pattern can be controlled by applying different stretching ratios to the soft substrate and thus are correlated to the anisotropic surface stresses near the contact line.
△ Less
Submitted 1 December, 2022;
originally announced December 2022.
-
Electronic Laboratory Notebook: A lazy approach
Authors:
Simon Schubotz,
Moritz Schubotz,
Günter K Auernhammer
Abstract:
Good research data management is essential in modern-day lab work. Various solutions exist that are either highly specific or need a significant effort to be customized appropriately. This paper presents an integrated solution for individuals and small groups of researchers in data-driven deductive research. Our electronic lab book generates itself out of notes and files, which are generated by on…
▽ More
Good research data management is essential in modern-day lab work. Various solutions exist that are either highly specific or need a significant effort to be customized appropriately. This paper presents an integrated solution for individuals and small groups of researchers in data-driven deductive research. Our electronic lab book generates itself out of notes and files, which are generated by one or several experiments. The generated electronic lab book is then presented on a Django-based website. The automated gathering of metadata significantly reduces the documentation effort for the lab worker and prevents human error in the repetitive task of manually entering basic meta-data. The skilled user can quickly adapt the electronic lab book software to his needs because the software employs widely used open-source software libraries with active communities and excellent documentation.
△ Less
Submitted 27 April, 2022;
originally announced May 2022.
-
Repulsive interactions of eco-corona covered microplastic particles quantitatively follow modelling of polymer brushes
Authors:
Thomas Witzmann,
Anja F. R. M. Ramsperger,
Simon Wieland,
Christian Laforsch,
Holger Kress,
Andreas Fery,
Günter K. Auernhammer
Abstract:
Environmental fate and toxicity of microplastic particles is dominated by their surface properties. In the environment an adsorbed layer of biomolecules and natural organic matter forms the so-called eco-corona. A quantitative description of how this eco-corona changes the particles' colloidal interactions is still missing. Here, we demonstrate with colloidal probe-atomic force microscopy that the…
▽ More
Environmental fate and toxicity of microplastic particles is dominated by their surface properties. In the environment an adsorbed layer of biomolecules and natural organic matter forms the so-called eco-corona. A quantitative description of how this eco-corona changes the particles' colloidal interactions is still missing. Here, we demonstrate with colloidal probe-atomic force microscopy that the formation of the eco-corona on microplastic particles introduces a soft film on the surface which changes the mechanical behaviour. We measure single particle-particle interactions and find a pronounced increase of long-range repulsive interactions upon eco-corona formation. These force-distance characteristics follow well the polymer brush model by Alexander and de Gennes. We further compare the obtained fitting parameters to known systems like polyelectrolyte multilayers and propose these as a model system for the eco-corona. The foundation of the eco-corona interacting like a polymer brush with its surrounding may help understand microplastic transport and aggregation in the environment.
△ Less
Submitted 16 November, 2021;
originally announced November 2021.
-
Capillary filling in drop merging: dynamics of the four-phase contact point
Authors:
Peyman Rostami,
Günter K. Auernhammer
Abstract:
The merging of immiscible drops differs significantly from the merging of miscible drops due to the formation of a liquid-liquid interface between drops. The immiscibility requires the formation of a four-phase contact point, where the drops, the gas and the substrate meet. We show that this point has its own unique dynamics, never studied beforehand. For very different scenarios, the propagation…
▽ More
The merging of immiscible drops differs significantly from the merging of miscible drops due to the formation of a liquid-liquid interface between drops. The immiscibility requires the formation of a four-phase contact point, where the drops, the gas and the substrate meet. We show that this point has its own unique dynamics, never studied beforehand. For very different scenarios, the propagation distance of this point follows scales with time like t^{0.5}. A model balancing the driving and dissipative forces agrees with our experiments.
△ Less
Submitted 24 September, 2021; v1 submitted 5 August, 2021;
originally announced August 2021.
-
Concentration Gradients in Evaporating Binary Droplets Probed by Spatially Resolved Raman and NMR Spectroscopy
Authors:
Alena K. Bell,
Jonas Kind,
Maximilian Hartmann,
Benjamin Kresse,
Mark V. Hoefler,
Benedikt B. Straub,
Guenter K. Auernhammer,
Michael Vogel,
Christina M. Thiele,
Robert W. Stark
Abstract:
Understanding the evaporation process of binary sessile droplets is essential for optimizing various technical processes, such as inkjet printing or heat transfer. Liquid mixtures whose evaporation and wetting properties may differ significantly from those of pure liquids are particularly interesting. Concentration gradients may occur in these binary droplets. The challenge is to measure concentra…
▽ More
Understanding the evaporation process of binary sessile droplets is essential for optimizing various technical processes, such as inkjet printing or heat transfer. Liquid mixtures whose evaporation and wetting properties may differ significantly from those of pure liquids are particularly interesting. Concentration gradients may occur in these binary droplets. The challenge is to measure concentration gradients without affecting the evaporation process. Here, spectroscopic methods with spatial resolution can discriminate between the components of a liquid mixture. We show that confocal Raman microscopy and spatially resolved nuclear magnetic resonance (NMR) spectroscopy can be used as complementary methods to measure concentration gradients in evaporating 1-butanol/1-hexanol droplets on a hydrophobic surface. Deuterating one of the liquids allows analysis of the local composition through the comparison of the intensities of the CH and CD stretching bands in Raman spectra. Spatially resolved NMR spectroscopy is used to measure the composition at different positions of the droplet. Confocal Raman and spatially resolved NMR experiments show the presence of a vertical concentration gradient as the 1-butanol/1-hexanol droplet evaporates.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
Flow profiles near receding three--phase contact lines: Influence of surfactants
Authors:
Benedikt B. Straub,
Henrik Schmidt,
Peyman Rostami,
Franziska Henrich,
Massimiliano Rossi,
Christian J. Kähler,
Hans-Jürgen Butt,
Günter K. Auernhammer
Abstract:
The dynamics of wetting and dewetting is largely determined by the velocity field near the contact lines. For water drops it has been observed that adding surfactant decreases the dynamic receding contact angle even at a concentration much lower than the critical micelle concentration (CMC). To better understand why surfactants have such a drastic effect on drop dynamics, we constructed a dedicate…
▽ More
The dynamics of wetting and dewetting is largely determined by the velocity field near the contact lines. For water drops it has been observed that adding surfactant decreases the dynamic receding contact angle even at a concentration much lower than the critical micelle concentration (CMC). To better understand why surfactants have such a drastic effect on drop dynamics, we constructed a dedicated a setup on an inverted microscope, in which an aqueous drop is held stationary while the transparent substrate is moved horizontally. Using astigmatism particle tracking velocimetry, we track the 3D displacement of the tracer particles in the flow. We study how surfactants alter the flow dynamics near the receding contact line of a moving drop for capillary numbers in the order of $10^{-6}$. Even for surfactant concentrations $c$ far below the critical micelle concentration ($c \ll$ CMC) Marangoni stresses change the flow drastically. We discuss our results first in a 2D model that considers advective and diffusive surfactant transport and deduce estimates of the magnitude and scaling of the Marangoni stress from this. Modeling and experiment agree that a tiny gradient in surface tension of a few $μN \, m^{-1}$ is enough to alter the flow profile significantly. The variation of the Marangoni stress with the distance from the contact line suggests that the 2D advection-diffusion model has to be extended to a full 3D model. The effect is ubiquitous, since surfactant is present in many technical and natural dewetting processes either deliberately or as contamination.
△ Less
Submitted 3 August, 2021; v1 submitted 26 May, 2021;
originally announced May 2021.
-
Versatile high-speed confocal microscopy using a single laser beam
Authors:
Benedikt B. Straub,
David C. Lah,
Henrik Schmidt,
Marcel Roth,
Laurent Gilson,
Hans-Jürgen Butt,
Günter K. Auernhammer
Abstract:
We present a new flexible high speed laser scanning confocal microscope and its extension by an astigmatism particle tracking device (APTV). Many standard confocal microscopes use either a single laser beam to scan the sample at relatively low overall frame rate, or many laser beam to simultaneously scan the sample and achieve a high overall frame rate. Single-laser-beam confocal microscope often…
▽ More
We present a new flexible high speed laser scanning confocal microscope and its extension by an astigmatism particle tracking device (APTV). Many standard confocal microscopes use either a single laser beam to scan the sample at relatively low overall frame rate, or many laser beam to simultaneously scan the sample and achieve a high overall frame rate. Single-laser-beam confocal microscope often use a point detector to acquire the image. To achieve high overall frame rates, we use, next to the standard 2D probe scanning unit, a second 2D scan unit projecting the image directly on a 2D CCD-sensor (re-scan configuration). Using only a single laser beam eliminates cross-talk and leads to an imaging quality that is independent of the frame rate with a lateral resolution of 0.235\unit{μm}. The design described here is suitable for high frame rate, i.e., for frame rates well above video rate (full frame) up to a line rate of 32kHz. The dwell time of the laser focus on any spot in the sample (122ns) is significantly shorter than in standard confocal microscopes (in the order of milli or microseconds). This short dwell time reduces phototoxicity and bleaching of fluorescent molecules. The new design opens further flexibility and facilitates coupling to other optical methods. The setup can easily be extended by an APTV device to measure three dimensional dynamics while being able to show high resolution confocal structures. Thus one can use the high resolution confocal information synchronized with an APTV dataset.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
Reversible magnetomechanical collapse: virtual touching and detachment of rigid inclusions in a soft elastic matrix
Authors:
Mate Puljiz,
Shilin Huang,
Karl A. Kalina,
Johannes Nowak,
Stefan Odenbach,
Markus Kästner,
Günter K. Auernhammer,
Andreas M. Menzel
Abstract:
Soft elastic composite materials containing particulate rigid inclusions in a soft elastic matrix are candidates for developing soft actuators or tunable damping devices. The possibility to reversibly drive the rigid inclusions within such a composite together to a close-to-touching state by an external stimulus would offer important benefits. Then, a significant tuning of the mechanical propertie…
▽ More
Soft elastic composite materials containing particulate rigid inclusions in a soft elastic matrix are candidates for developing soft actuators or tunable damping devices. The possibility to reversibly drive the rigid inclusions within such a composite together to a close-to-touching state by an external stimulus would offer important benefits. Then, a significant tuning of the mechanical properties could be achieved due to the resulting mechanical hardening. For a long time, it has been argued whether a virtual touching of the embedded magnetic particles with subsequent detachment can actually be observed in real materials, and if so, whether the process is reversible. Here, we present experimental results that demonstrate this phenomenon in reality. Our system consists of two paramagnetic nickel particles embedded at finite initial distance in a soft elastic polymeric gel matrix. Magnetization in an external magnetic field tunes the magnetic attraction between the particles and drives the process. We quantify the scenario by different theoretical tools, i.e., explicit analytical calculations in the framework of linear elasticity theory, a projection onto simplified dipole-spring models, as well as detailed finite-element simulations. From these different approaches, we conclude that in our case the cycle of virtual touching and detachment shows hysteretic behavior due to the mutual magnetization between the paramagnetic particles. Our results are important for the design and construction of reversibly tunable mechanical damping devices. Moreover, our projection on dipole-spring models allows the formal connection of our description to various related systems, e.g., magnetosome filaments in magnetotactic bacteria.
△ Less
Submitted 20 October, 2018;
originally announced October 2018.
-
Forced dynamic dewetting of structured surfaces: Influence of surfactants
Authors:
Franziska Henrich,
Dorota Linke,
Hans Martin Sauer,
Edgar Dörsam,
Steffen Hardt,
Hans-Jürgen Butt,
Günter K. Auernhammer
Abstract:
We analyse the dewetting of printing plates for gravure printing with well-defined gravure cells. The printing plates were mounted on a rotating horizontal cylinder that is half immersed in an aqueous solution of the anionic surfactant sodium 1-decanesulfonate. The gravure plates and the presence of surfactants serve as one example of a real-world dewetting situation. When rotating the cylinder, a…
▽ More
We analyse the dewetting of printing plates for gravure printing with well-defined gravure cells. The printing plates were mounted on a rotating horizontal cylinder that is half immersed in an aqueous solution of the anionic surfactant sodium 1-decanesulfonate. The gravure plates and the presence of surfactants serve as one example of a real-world dewetting situation. When rotating the cylinder, a liquid meniscus was partially drawn out of the liquid forming a dynamic contact angle at the contact line. The dynamic contact angle is decreased on a structured surface as compared to a smooth one. This is due to contact line pinning at the borders of the gravure cells. Additionally, surfactants tend to decrease the dynamic receding contact angle. We consider the interplay between these two effects. We compare the height differences of the meniscus on the structured and unstructured area as function of dewetting speeds. The height difference increases with increasing dewetting speed. With increasing size of the gravure cells this height difference and the induced changes in the dynamic contact angle increased. By adding surfactant, the height difference and the changes in the contact angle for the same surface decreased. We further note that although the liquid dewets the printing plates some liquid is always left in the gravure cell. At high enough surfactant concentrations or high enough dewetting speed, the dynamic contact angles in the structured surface approach those in flat surfaces. We conclude that surfactant reduces the influence of surface structure on dynamic dewetting.
△ Less
Submitted 13 February, 2019; v1 submitted 28 March, 2018;
originally announced March 2018.
-
Forces on rigid inclusions in elastic media and resulting matrix-mediated interactions
Authors:
Mate Puljiz,
Shilin Huang,
Günter K. Auernhammer,
Andreas M. Menzel
Abstract:
To describe many-particle systems suspended in incompressible low-Reynolds-number fluids, effective hydrodynamic interactions can be introduced. Here, we consider particles embedded in elastic media. The effective elastic interactions between spherical particles are calculated analytically, inspired by the approach in the fluid case. Our experiments on interacting magnetic particles confirm the th…
▽ More
To describe many-particle systems suspended in incompressible low-Reynolds-number fluids, effective hydrodynamic interactions can be introduced. Here, we consider particles embedded in elastic media. The effective elastic interactions between spherical particles are calculated analytically, inspired by the approach in the fluid case. Our experiments on interacting magnetic particles confirm the theory. In view of the huge success of the method in hydrodynamics, we similarly expect many future applications in the elastic case, e.g. for elastic composite materials.
△ Less
Submitted 5 February, 2017;
originally announced February 2017.
-
Buckling of paramagnetic chains in soft gels
Authors:
Shilin Huang,
Giorgio Pessot,
Peet Cremer,
Rudolf Weeber,
Christian Holm,
Johannes Nowak,
Stefan Odenbach,
Andreas M. Menzel,
Günter K. Auernhammer
Abstract:
We study the magneto-elastic coupling behavior of paramagnetic chains in soft polymer gels exposed to external magnetic fields. To this end, a laser scanning confocal microscope is used to observe the morphology of the paramagnetic chains together with the deformation field of the surrounding gel network. The paramagnetic chains in soft polymer gels show rich morphological shape changes under obli…
▽ More
We study the magneto-elastic coupling behavior of paramagnetic chains in soft polymer gels exposed to external magnetic fields. To this end, a laser scanning confocal microscope is used to observe the morphology of the paramagnetic chains together with the deformation field of the surrounding gel network. The paramagnetic chains in soft polymer gels show rich morphological shape changes under oblique magnetic fields, in particular a pronounced buckling deformation. The details of the resulting morphological shapes depend on the length of the chain, the strength of the external magnetic field, and the modulus of the gel. Based on the observation that the magnetic chains are strongly coupled to the surrounding polymer network, a simplified model is developed to describe their buckling behavior. A coarse-grained molecular dynamics simulation model featuring an increased matrix stiffness on the surfaces of the particles leads to morphologies in agreement with the experimentally observed buckling effects.
△ Less
Submitted 15 April, 2015;
originally announced April 2015.
-
Measuring contact angle and meniscus shape with a reflected laser beam
Authors:
T. F. Eibach,
D. Fell,
H. Nguyen,
H. J. Butt,
G. K. Auernhammer
Abstract:
Side-view imaging of the contact angle between an extended planar solid surface and a liquid is problematic. Even when aligning the view perfectly parallel to the contact line, focusing one point of the contact line is not possible. We describe a new measurement technique for determining contact angles with the reflection of a widened laser sheet on a moving contact line. We verified this new tech…
▽ More
Side-view imaging of the contact angle between an extended planar solid surface and a liquid is problematic. Even when aligning the view perfectly parallel to the contact line, focusing one point of the contact line is not possible. We describe a new measurement technique for determining contact angles with the reflection of a widened laser sheet on a moving contact line. We verified this new technique measuring the contact angle on a cylinder, rotating partially immersed in a liquid. A laser sheet is inclined under an angle $\varphi$ to the unperturbed liquid surface and is reflected off the meniscus. Collected on a screen, the reflection image contains information to determine the contact angle. When dividing the laser sheet into an array of laser rays by placing a mesh into the beam path, the shape of the meniscus can be reconstructed from the reflection image. We verified the method by measuring the receding contact angle versus speed for aqueous cetyltrimethyl ammonium bromide solutions on a smooth hydrophobized as well as on a rough polystyrene surface.
△ Less
Submitted 3 June, 2013;
originally announced June 2013.
-
Compressive consolidation of strongly aggregated particle gels
Authors:
Ryohei Seto,
Robert Botet,
Martine Meireles,
Günter K. Auernhammer,
Bernard Cabane
Abstract:
The compressive yield stress of particle gels shows a highly nonlinear dependence on the packing fraction. We have studied continuous compression processes, and discussed the packing fraction dependence with the particle scale rearrangements. The 2D simulation of uniaxial compression was applied to fractal networks, and the required compressive stresses were evaluated for a wide range of packing f…
▽ More
The compressive yield stress of particle gels shows a highly nonlinear dependence on the packing fraction. We have studied continuous compression processes, and discussed the packing fraction dependence with the particle scale rearrangements. The 2D simulation of uniaxial compression was applied to fractal networks, and the required compressive stresses were evaluated for a wide range of packing fractions that approached close packing. The compression acts to reduce the size of the characteristic structural entities (i.e. the correlation length of the structure). We observed three stages of compression: (I) elastic-dominant regime; (II) single-mode plastic regime, where the network strengths are determined by the typical length scale and the rolling mode; and (III) multi-mode plastic regime, where sliding mode and connection breaks are important. We also investigated the way of losing the fractal correlation under compression. It turns out that both fractal dimension $D_{\mathrm{f}}$ and correlation length $ξ$ start to change from the early stage of compression, which is different from the usual assumption in theoretical models.
△ Less
Submitted 22 May, 2013; v1 submitted 18 January, 2013;
originally announced January 2013.
-
Restructuring of colloidal aggregates in shear flow: Coupling interparticle contact models with Stokesian dynamics
Authors:
Ryohei Seto,
Robert Botet,
Günter K. Auernhammer,
Heiko Briesen
Abstract:
A method to couple interparticle contact models with Stokesian dynamics (SD) is introduced to simulate colloidal aggregates under flow conditions. The contact model mimics both the elastic and plastic behavior of the cohesive connections between particles within clusters. Owing to this, clusters can maintain their structures under low stress while restructuring or even breakage may occur under suf…
▽ More
A method to couple interparticle contact models with Stokesian dynamics (SD) is introduced to simulate colloidal aggregates under flow conditions. The contact model mimics both the elastic and plastic behavior of the cohesive connections between particles within clusters. Owing to this, clusters can maintain their structures under low stress while restructuring or even breakage may occur under sufficiently high stress conditions. SD is an efficient method to deal with the long-ranged and many-body nature of hydrodynamic interactions for low Reynolds number flows. By using such a coupled model, the restructuring of colloidal aggregates under stepwise increasing shear flows was studied. Irreversible compaction occurs due to the increase of hydrodynamic stress on clusters. Results show that the greater part of the fractal clusters are compacted to rod-shaped packed structures, while the others show isotropic compaction.
△ Less
Submitted 17 December, 2012; v1 submitted 25 April, 2012;
originally announced April 2012.
-
Experimental analysis of single particle deformations and rotations in colloidal and granular systems
Authors:
Marcel Roth,
Michael Franzmann,
Maria D'Acunzi,
Max Kreiter,
Günter K. Auernhammer
Abstract:
Confocal microscopy of fluorescent labeled particles has been used to study the dynamical and structural properties of colloidal and granular matter in real space. Localization algorithms allow for a fully automatized determination of the three dimensional positions and translational motions of all constituent (spherical) particles in the observed volume. Though, particle deformations or rotationa…
▽ More
Confocal microscopy of fluorescent labeled particles has been used to study the dynamical and structural properties of colloidal and granular matter in real space. Localization algorithms allow for a fully automatized determination of the three dimensional positions and translational motions of all constituent (spherical) particles in the observed volume. Though, particle deformations or rotational motions were hardly addressed. Here we present preparation and image processing techniques to also extract the deformation and rotational state of the particles. The deformation analysis is worked out for particles with a hollow sphere-like fluorescence intensity distribution that are more sensitive to small deformations. In the second case of rotations we utilize the angle dependence of the light absorption of the incorporated dye molecules to prepare optically anisotropic particles in analogy to polarized fluorescence after photobleaching. Rotations of these particles are expressed as intensity fluctuations in the confocal images. In contrast to existing methods our techniques do not reduce the quality of the actual particle localization. They can help understanding complex reorganization processes in arrested states of colloidal and granular materials during aging or under external stimuli such as shear or compression.
△ Less
Submitted 6 December, 2011; v1 submitted 18 June, 2011;
originally announced June 2011.
-
Colloidal aggregates tested via nanoindentation and simultaneous 3D imaging
Authors:
Marcel Roth,
Carsten Schilde,
Philipp Lellig,
Arno Kwade,
Günter K. Auernhammer
Abstract:
The mechanical properties of aggregated colloids depend on the mutual interplay of inter-particle potentials, contact forces, aggregate structure and material properties of the bare particles. Owing to this variety of influences experimental results from macroscopic mechanical testings were mostly compared to time-consuming, microscopic simulations rather than to analytical theories. The aim of th…
▽ More
The mechanical properties of aggregated colloids depend on the mutual interplay of inter-particle potentials, contact forces, aggregate structure and material properties of the bare particles. Owing to this variety of influences experimental results from macroscopic mechanical testings were mostly compared to time-consuming, microscopic simulations rather than to analytical theories. The aim of the present paper was to relate both macroscopic and microscopic mechanical data with each other and simple analytical models. We investigated dense amorphous aggregates made from monodisperse poly-methyl methacrylate (PMMA) particles (diameter: 1.6μm) via nanoindentation in combination with confocal microscopy. The resulting macroscopic information were complemented by the three dimensional aggregate structure as well as the microscopic strain field. The strain field was in reasonable agreement with the predictions from analytical continuum theories. As a consequence the measured force-depth curves could be analyzed within a theoretical framework that has frequently been used for nanoindentation of atomic matter such as metals, ceramics and polymers. The extracted values for hardness and effective elastic modulus represented average values characteristic of the aggregate. On base of these parameters we discuss the influence of the strength of particle bonds by introducing polystyrene (PS) between the particles.
△ Less
Submitted 12 May, 2012; v1 submitted 21 February, 2011;
originally announced February 2011.
-
Time-resolved X-ray microscopy of nanoparticle aggregates under oscillatory shear
Authors:
G. K. Auernhammer,
K. Fauth,
B. Ullrich,
J. Zhao,
M. Weigand,
D. Vollmer
Abstract:
Of all current detection techniques with nanometer resolution, only X-ray microscopy allows imaging nanoparticles in suspension. Can it also be used to investigate structural dynamics? When studying response to mechanical stimuli, the challenge lies in applying them with precision comparable to spatial resolution. In the first shear experiments performed in an X-ray microscope, we accomplished t…
▽ More
Of all current detection techniques with nanometer resolution, only X-ray microscopy allows imaging nanoparticles in suspension. Can it also be used to investigate structural dynamics? When studying response to mechanical stimuli, the challenge lies in applying them with precision comparable to spatial resolution. In the first shear experiments performed in an X-ray microscope, we accomplished this by inserting a piezo actuator driven shear cell into the focal plane of a scanning transmission X-ray microscope (STXM). Thus shear-induced reorganization of magnetite nanoparticle aggregates could be demonstrated in suspension. As X-ray microscopy proves suitable for studying structural change, new prospects open up in physics at small length scales.
△ Less
Submitted 5 December, 2008;
originally announced December 2008.
-
Frequency dependent deformation of liquid crystal droplets in an external electric field
Authors:
Günter K. Auernhammer,
Jinyu Zhao,
Beate Ullrich,
Doris Vollmer
Abstract:
Nematic drops suspended in the isotropic phase of the same substance were subjected to alternating electrical fields of varying frequency. The system was carefully kept in the isotropic-nematic coexistance region, which was broadened due to small amounts of non-mesogenic additives. Whereas the droplets remained spherical at low (order of 10 Hz) and high frequencies (in the kHz range), at interme…
▽ More
Nematic drops suspended in the isotropic phase of the same substance were subjected to alternating electrical fields of varying frequency. The system was carefully kept in the isotropic-nematic coexistance region, which was broadened due to small amounts of non-mesogenic additives. Whereas the droplets remained spherical at low (order of 10 Hz) and high frequencies (in the kHz range), at intermediate frequencies, we observed a marked flattening of the droplet in the plane perpendicular to the applied field. The deformation of the liquid crystal (LC) droplets occurred both in substances with positive and negative dielectric anisotropy. The experimental data can be quantitatively modelled with a combination of the leaky dielectric model and screening of the applied electric field due to the finite conductivity.
△ Less
Submitted 26 March, 2009; v1 submitted 3 December, 2008;
originally announced December 2008.
-
Shear induced instabilities in layered liquids
Authors:
Guenter K. Auernhammer,
Helmut R. Brand,
Harald Pleiner
Abstract:
Motivated by the experimentally observed shear-induced destabilization and reorientation of smectic A like systems, we consider an extended formulation of smectic A hydrodynamics. We include both, the smectic layering (via the layer displacement u and the layer normal p) and the director n of the underlying nematic order in our macroscopic hydrodynamic description and allow both directions to di…
▽ More
Motivated by the experimentally observed shear-induced destabilization and reorientation of smectic A like systems, we consider an extended formulation of smectic A hydrodynamics. We include both, the smectic layering (via the layer displacement u and the layer normal p) and the director n of the underlying nematic order in our macroscopic hydrodynamic description and allow both directions to differ in non equilibrium situations. In an homeotropically aligned sample the nematic director does couple to an applied simple shear, whereas the smectic layering stays unchanged. This difference leads to a finite (but usually small) angle between n and p, which we find to be equivalent to an effective dilatation of the layers. This effective dilatation leads, above a certain threshold, to an undulation instability of the layers. We generalize our earlier approach [Rheol. Acta, vol.39(3), 15] and include the cross couplings with the velocity field and the order parameters for orientational and positional order and show how the order parameters interact with the undulation instability. We explore the influence of various material parameters on the instability. Comparing our results to recent experiments and molecular dynamic simulations, we find a good qualitative agreement.
△ Less
Submitted 18 October, 2002;
originally announced October 2002.