-
Collecting single photons from a cavity-coupled quantum dot using an adiabatic tapered fiber
Authors:
Anatole Bach,
Antoine Chapuis,
Corentin Morin,
Richard Hostein,
Savvas Germanis,
Benoit Eble,
Mathieu Bernard,
Florent Margaillan,
Paola Atkinson,
Valia Voliotis,
Remy Braive,
Kimon Moratis
Abstract:
We demonstrate efficient in-plane optical fiber collection of single photon emission from quantum dots embedded in photonic crystal cavities. This was achieved via adiabatic coupling between a tapered optical fiber and a tapered on-chip photonic waveguide coupled to the photonic crystal cavity. The collection efficiency of a dot in a photonic crystal cavity was measured to be 5 times greater via t…
▽ More
We demonstrate efficient in-plane optical fiber collection of single photon emission from quantum dots embedded in photonic crystal cavities. This was achieved via adiabatic coupling between a tapered optical fiber and a tapered on-chip photonic waveguide coupled to the photonic crystal cavity. The collection efficiency of a dot in a photonic crystal cavity was measured to be 5 times greater via the tapered optical fiber compared to collection by a microscope objective lens above the cavity. The single photon source was also characterized by second order photon correlations measurements giving g(2)(0)=0.17 under non-resonant excitation. Numerical calculations demonstrate that the collection efficiency could be further increased by improving the dot-cavity coupling and by increasing the overlap length of the tapered fiber with the on-chip waveguide. An adiabatic coupling of near unity is predicted for an overlap length of 5 microns.
△ Less
Submitted 13 October, 2024;
originally announced October 2024.
-
Responsible AI for Earth Observation
Authors:
Pedram Ghamisi,
Weikang Yu,
Andrea Marinoni,
Caroline M. Gevaert,
Claudio Persello,
Sivasakthy Selvakumaran,
Manuela Girotto,
Benjamin P. Horton,
Philippe Rufin,
Patrick Hostert,
Fabio Pacifici,
Peter M. Atkinson
Abstract:
The convergence of artificial intelligence (AI) and Earth observation (EO) technologies has brought geoscience and remote sensing into an era of unparalleled capabilities. AI's transformative impact on data analysis, particularly derived from EO platforms, holds great promise in addressing global challenges such as environmental monitoring, disaster response and climate change analysis. However, t…
▽ More
The convergence of artificial intelligence (AI) and Earth observation (EO) technologies has brought geoscience and remote sensing into an era of unparalleled capabilities. AI's transformative impact on data analysis, particularly derived from EO platforms, holds great promise in addressing global challenges such as environmental monitoring, disaster response and climate change analysis. However, the rapid integration of AI necessitates a careful examination of the responsible dimensions inherent in its application within these domains. In this paper, we represent a pioneering effort to systematically define the intersection of AI and EO, with a central focus on responsible AI practices. Specifically, we identify several critical components guiding this exploration from both academia and industry perspectives within the EO field: AI and EO for social good, mitigating unfair biases, AI security in EO, geo-privacy and privacy-preserving measures, as well as maintaining scientific excellence, open data, and guiding AI usage based on ethical principles. Furthermore, the paper explores potential opportunities and emerging trends, providing valuable insights for future research endeavors.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Spatial Latent Gaussian Modelling with Change of Support
Authors:
Erick A. Chacón-Montalván,
Peter M. Atkinson,
Christopher Nemeth,
Benjamin M. Taylor,
Paula Moraga
Abstract:
Spatial data are often derived from multiple sources (e.g. satellites, in-situ sensors, survey samples) with different supports, but associated with the same properties of a spatial phenomenon of interest. It is common for predictors to also be measured on different spatial supports than the response variables. Although there is no standard way to work with spatial data with different supports, a…
▽ More
Spatial data are often derived from multiple sources (e.g. satellites, in-situ sensors, survey samples) with different supports, but associated with the same properties of a spatial phenomenon of interest. It is common for predictors to also be measured on different spatial supports than the response variables. Although there is no standard way to work with spatial data with different supports, a prevalent approach used by practitioners has been to use downscaling or interpolation to project all the variables of analysis towards a common support, and then using standard spatial models. The main disadvantage with this approach is that simple interpolation can introduce biases and, more importantly, the uncertainty associated with the change of support is not taken into account in parameter estimation. In this article, we propose a Bayesian spatial latent Gaussian model that can handle data with different rectilinear supports in both the response variable and predictors. Our approach allows to handle changes of support more naturally according to the properties of the spatial stochastic process being used, and to take into account the uncertainty from the change of support in parameter estimation and prediction. We use spatial stochastic processes as linear combinations of basis functions where Gaussian Markov random fields define the weights. Our hierarchical modelling approach can be described by the following steps: (i) define a latent model where response variables and predictors are considered as latent stochastic processes with continuous support, (ii) link the continuous-index set stochastic processes with its projection to the support of the observed data, (iii) link the projected process with the observed data. We show the applicability of our approach by simulation studies and modelling land suitability for improved grassland in Rhondda Cynon Taf, a county borough in Wales.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Spatial Gated Multi-Layer Perceptron for Land Use and Land Cover Mapping
Authors:
Ali Jamali,
Swalpa Kumar Roy,
Danfeng Hong,
Peter M Atkinson,
Pedram Ghamisi
Abstract:
Convolutional Neural Networks (CNNs) are models that are utilized extensively for the hierarchical extraction of features. Vision transformers (ViTs), through the use of a self-attention mechanism, have recently achieved superior modeling of global contextual information compared to CNNs. However, to realize their image classification strength, ViTs require substantial training datasets. Where the…
▽ More
Convolutional Neural Networks (CNNs) are models that are utilized extensively for the hierarchical extraction of features. Vision transformers (ViTs), through the use of a self-attention mechanism, have recently achieved superior modeling of global contextual information compared to CNNs. However, to realize their image classification strength, ViTs require substantial training datasets. Where the available training data are limited, current advanced multi-layer perceptrons (MLPs) can provide viable alternatives to both deep CNNs and ViTs. In this paper, we developed the SGU-MLP, a learning algorithm that effectively uses both MLPs and spatial gating units (SGUs) for precise land use land cover (LULC) mapping. Results illustrated the superiority of the developed SGU-MLP classification algorithm over several CNN and CNN-ViT-based models, including HybridSN, ResNet, iFormer, EfficientFormer and CoAtNet. The proposed SGU-MLP algorithm was tested through three experiments in Houston, USA, Berlin, Germany and Augsburg, Germany. The SGU-MLP classification model was found to consistently outperform the benchmark CNN and CNN-ViT-based algorithms. For example, for the Houston experiment, SGU-MLP significantly outperformed HybridSN, CoAtNet, Efficientformer, iFormer and ResNet by approximately 15%, 19%, 20%, 21%, and 25%, respectively, in terms of average accuracy. The code will be made publicly available at https://github.com/aj1365/SGUMLP
△ Less
Submitted 9 August, 2023;
originally announced August 2023.
-
Identifying Many-Body Localization in Realistic Dot Arrays
Authors:
Alexander Nico-Katz,
Gulzat Jaliel,
Paola Atkinson,
Thomas A. Mitchell,
David A. Ritchie,
Charles G. Smith,
Sougato Bose
Abstract:
We determine whether or not it is possible to identify many-body localization in quantum dot arrays, given their current technological capacities. We analyze the phase diagram of an extended Fermi-Hubbard model - a theoretical system that quantum dot arrays are known to simulate - using several quantities of varying experimental accessibility. By deriving the parameters of our model from our exper…
▽ More
We determine whether or not it is possible to identify many-body localization in quantum dot arrays, given their current technological capacities. We analyze the phase diagram of an extended Fermi-Hubbard model - a theoretical system that quantum dot arrays are known to simulate - using several quantities of varying experimental accessibility. By deriving the parameters of our model from our experimental system, we find that many-body localization can potentially be detected in current-generation quantum dot arrays. A pitfall that we identify is that the freezing of a system due to strong interactions yields signatures similar to conventional localization. We find that the most widely-used experimental signature of localization - the imbalance - is not sensitive to this fact, and may be unsuitable as the lone identifier of the many-body localized regime.
△ Less
Submitted 19 January, 2023;
originally announced January 2023.
-
AI Security for Geoscience and Remote Sensing: Challenges and Future Trends
Authors:
Yonghao Xu,
Tao Bai,
Weikang Yu,
Shizhen Chang,
Peter M. Atkinson,
Pedram Ghamisi
Abstract:
Recent advances in artificial intelligence (AI) have significantly intensified research in the geoscience and remote sensing (RS) field. AI algorithms, especially deep learning-based ones, have been developed and applied widely to RS data analysis. The successful application of AI covers almost all aspects of Earth observation (EO) missions, from low-level vision tasks like super-resolution, denoi…
▽ More
Recent advances in artificial intelligence (AI) have significantly intensified research in the geoscience and remote sensing (RS) field. AI algorithms, especially deep learning-based ones, have been developed and applied widely to RS data analysis. The successful application of AI covers almost all aspects of Earth observation (EO) missions, from low-level vision tasks like super-resolution, denoising and inpainting, to high-level vision tasks like scene classification, object detection and semantic segmentation. While AI techniques enable researchers to observe and understand the Earth more accurately, the vulnerability and uncertainty of AI models deserve further attention, considering that many geoscience and RS tasks are highly safety-critical. This paper reviews the current development of AI security in the geoscience and RS field, covering the following five important aspects: adversarial attack, backdoor attack, federated learning, uncertainty and explainability. Moreover, the potential opportunities and trends are discussed to provide insights for future research. To the best of the authors' knowledge, this paper is the first attempt to provide a systematic review of AI security-related research in the geoscience and RS community. Available code and datasets are also listed in the paper to move this vibrant field of research forward.
△ Less
Submitted 22 June, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Effect of gallium termination on InGaAs wetting layer properties in droplet epitaxy InGaAs quantum dots
Authors:
David Fricker,
Paola Atkinson,
Mihail I Lepsa,
Zheng Zeng,
András Kovács,
Lidia Kibkalo,
Rafal E Dunin-Borkowski,
Beata E. Kardynał
Abstract:
Self-assembled quantum dots based on III-V semiconductors have excellent properties for applications in quantum optics. However, the presence of a 2D wetting layer which forms during the Stranski-Krastanov growth of quantum dots can limit their performance. Here, we investigate wetting layer formation during quantum dot growth by the alternative droplet epitaxy technique. We use a combination of p…
▽ More
Self-assembled quantum dots based on III-V semiconductors have excellent properties for applications in quantum optics. However, the presence of a 2D wetting layer which forms during the Stranski-Krastanov growth of quantum dots can limit their performance. Here, we investigate wetting layer formation during quantum dot growth by the alternative droplet epitaxy technique. We use a combination of photoluminescence excitation spectroscopy, lifetime measurements, and transmission electron microscopy to identify the presence of an InGaAs wetting layer in these droplet epitaxy quantum dots, even in the absence of distinguishable wetting layer photoluminescence. We observe that increasing the amount of Ga deposited on a GaAs (100) surface prior to the growth of InGaAs quantum dots leads to a significant reduction in the emission wavelength of the wetting layer to the point where it can no longer be distinguished from the GaAs acceptor peak emission in photoluminescence measurements.
△ Less
Submitted 4 June, 2022;
originally announced June 2022.
-
Converting single photons from an InAs/GaAs quantum dot into the ultraviolet: preservation of second-order correlations
Authors:
Anica Hamer,
David Fricker,
Marcel Hohn,
Paola Atkinson,
Mihail Lepsa,
Stefan Linden,
Frank Vewinger,
Beata Kardynal,
Simon Stellmer
Abstract:
Wavelength conversion at the single-photon level is required to forge a quantum network from distinct quantum devices. Such devices include solid-state emitters of single or entangled photons, as well as network nodes based on atoms or ions. Here we demonstrate the conversion of single photons emitted from a III-V semiconductor quantum dot at 853nm via sum frequency conversion to the wavelength of…
▽ More
Wavelength conversion at the single-photon level is required to forge a quantum network from distinct quantum devices. Such devices include solid-state emitters of single or entangled photons, as well as network nodes based on atoms or ions. Here we demonstrate the conversion of single photons emitted from a III-V semiconductor quantum dot at 853nm via sum frequency conversion to the wavelength of the strong transition of Yb ions at 370nm. We measure the second-order correlation function of both the unconverted and of the converted photon and show that the single-photon character of the quantum dot emission is preserved during the conversion process.
△ Less
Submitted 21 December, 2021;
originally announced December 2021.
-
UNetFormer: A UNet-like Transformer for Efficient Semantic Segmentation of Remote Sensing Urban Scene Imagery
Authors:
Libo Wang,
Rui Li,
Ce Zhang,
Shenghui Fang,
Chenxi Duan,
Xiaoliang Meng,
Peter M. Atkinson
Abstract:
Semantic segmentation of remotely sensed urban scene images is required in a wide range of practical applications, such as land cover mapping, urban change detection, environmental protection, and economic assessment.Driven by rapid developments in deep learning technologies, the convolutional neural network (CNN) has dominated semantic segmentation for many years. CNN adopts hierarchical feature…
▽ More
Semantic segmentation of remotely sensed urban scene images is required in a wide range of practical applications, such as land cover mapping, urban change detection, environmental protection, and economic assessment.Driven by rapid developments in deep learning technologies, the convolutional neural network (CNN) has dominated semantic segmentation for many years. CNN adopts hierarchical feature representation, demonstrating strong capabilities for local information extraction. However, the local property of the convolution layer limits the network from capturing the global context. Recently, as a hot topic in the domain of computer vision, Transformer has demonstrated its great potential in global information modelling, boosting many vision-related tasks such as image classification, object detection, and particularly semantic segmentation. In this paper, we propose a Transformer-based decoder and construct a UNet-like Transformer (UNetFormer) for real-time urban scene segmentation. For efficient segmentation, the UNetFormer selects the lightweight ResNet18 as the encoder and develops an efficient global-local attention mechanism to model both global and local information in the decoder. Extensive experiments reveal that our method not only runs faster but also produces higher accuracy compared with state-of-the-art lightweight models. Specifically, the proposed UNetFormer achieved 67.8% and 52.4% mIoU on the UAVid and LoveDA datasets, respectively, while the inference speed can achieve up to 322.4 FPS with a 512x512 input on a single NVIDIA GTX 3090 GPU. In further exploration, the proposed Transformer-based decoder combined with a Swin Transformer encoder also achieves the state-of-the-art result (91.3% F1 and 84.1% mIoU) on the Vaihingen dataset. The source code will be freely available at https://github.com/WangLibo1995/GeoSeg.
△ Less
Submitted 26 June, 2022; v1 submitted 18 September, 2021;
originally announced September 2021.
-
First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors
Authors:
ALICE ITS project,
:,
G. Aglieri Rinella,
M. Agnello,
B. Alessandro,
F. Agnese,
R. S. Akram,
J. Alme,
E. Anderssen,
D. Andreou,
F. Antinori,
N. Apadula,
P. Atkinson,
R. Baccomi,
A. Badalà,
A. Balbino,
C. Bartels,
R. Barthel,
F. Baruffaldi,
I. Belikov,
S. Beole,
P. Becht,
A. Bhatti,
M. Bhopal,
N. Bianchi
, et al. (230 additional authors not shown)
Abstract:
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to ra…
▽ More
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to radii of about 2cm without any signs of mechanical or electrical damage. During a subsequent characterisation using a 5.4GeV electron beam, it was further confirmed that they preserve their full electrical functionality as well as particle detection performance.
In this article, the bending procedure and the setup used for characterisation are detailed. Furthermore, the analysis of the beam test, including the measurement of the detection efficiency as a function of beam position and local inclination angle, is discussed. The results show that the sensors maintain their excellent performance after bending to radii of 2cm, with detection efficiencies above 99.9% at typical operating conditions, paving the way towards a new class of detectors with unprecedented low material budget and ideal geometrical properties.
△ Less
Submitted 17 August, 2021; v1 submitted 27 May, 2021;
originally announced May 2021.
-
Scale-aware Neural Network for Semantic Segmentation of Multi-resolution Remote Sensing Images
Authors:
Libo Wang,
Ce Zhang,
Rui Li,
Chenxi Duan,
Xiaoliang Meng,
Peter M. Atkinson
Abstract:
Assigning geospatial objects with specific categories at the pixel level is a fundamental task in remote sensing image analysis. Along with rapid development in sensor technologies, remotely sensed images can be captured at multiple spatial resolutions (MSR) with information content manifested at different scales. Extracting information from these MSR images represents huge opportunities for enhan…
▽ More
Assigning geospatial objects with specific categories at the pixel level is a fundamental task in remote sensing image analysis. Along with rapid development in sensor technologies, remotely sensed images can be captured at multiple spatial resolutions (MSR) with information content manifested at different scales. Extracting information from these MSR images represents huge opportunities for enhanced feature representation and characterisation. However, MSR images suffer from two critical issues: 1) increased scale variation of geo-objects and 2) loss of detailed information at coarse spatial resolutions. To bridge these gaps, in this paper, we propose a novel scale-aware neural network (SaNet) for semantic segmentation of MSR remotely sensed imagery. SaNet deploys a densely connected feature network (DCFFM) module to capture high-quality multi-scale context, such that the scale variation is handled properly and the quality of segmentation is increased for both large and small objects. A spatial feature recalibration (SFRM) module is further incorporated into the network to learn intact semantic content with enhanced spatial relationships, where the negative effects of information loss are removed. The combination of DCFFM and SFRM allows SaNet to learn scale-aware feature representation, which outperforms the existing multi-scale feature representation. Extensive experiments on three semantic segmentation datasets demonstrated the effectiveness of the proposed SaNet in cross-resolution segmentation.
△ Less
Submitted 4 November, 2021; v1 submitted 14 March, 2021;
originally announced March 2021.
-
Inference for extreme earthquake magnitudes accounting for a time-varying measurement process
Authors:
Zak Varty,
Jonathan A. Tawn,
Peter M. Atkinson,
Stijn Bierman
Abstract:
Investment in measuring a process more completely or accurately is only useful if these improvements can be utilised during modelling and inference. We consider how improvements to data quality over time can be incorporated when selecting a modelling threshold and in the subsequent inference of an extreme value analysis. Motivated by earthquake catalogues, we consider variable data quality in the…
▽ More
Investment in measuring a process more completely or accurately is only useful if these improvements can be utilised during modelling and inference. We consider how improvements to data quality over time can be incorporated when selecting a modelling threshold and in the subsequent inference of an extreme value analysis. Motivated by earthquake catalogues, we consider variable data quality in the form of rounded and incompletely observed data. We develop an approach to select a time-varying modelling threshold that makes best use of the available data, accounting for uncertainty in the magnitude model and for the rounding of observations. We show the benefits of the proposed approach on simulated data and apply the method to a catalogue of earthquakes induced by gas extraction in the Netherlands. This more than doubles the usable catalogue size and greatly increases the precision of high magnitude quantile estimates. This has important consequences for the design and cost of earthquake defences. For the first time, we find compelling data-driven evidence against the applicability of the Gutenberg-Richer law to these earthquakes. Furthermore, our approach to automated threshold selection appears to have much potential for generic applications of extreme value methods.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
Robust Unsupervised Small Area Change Detection from SAR Imagery Using Deep Learning
Authors:
Xinzheng Zhang,
Hang Su,
Ce Zhang,
Xiaowei Gu,
Xiaoheng Tan,
Peter M. Atkinson
Abstract:
Small area change detection from synthetic aperture radar (SAR) is a highly challenging task. In this paper, a robust unsupervised approach is proposed for small area change detection from multi-temporal SAR images using deep learning. First, a multi-scale superpixel reconstruction method is developed to generate a difference image (DI), which can suppress the speckle noise effectively and enhance…
▽ More
Small area change detection from synthetic aperture radar (SAR) is a highly challenging task. In this paper, a robust unsupervised approach is proposed for small area change detection from multi-temporal SAR images using deep learning. First, a multi-scale superpixel reconstruction method is developed to generate a difference image (DI), which can suppress the speckle noise effectively and enhance edges by exploiting local, spatially homogeneous information. Second, a two-stage centre-constrained fuzzy c-means clustering algorithm is proposed to divide the pixels of the DI into changed, unchanged and intermediate classes with a parallel clustering strategy. Image patches belonging to the first two classes are then constructed as pseudo-label training samples, and image patches of the intermediate class are treated as testing samples. Finally, a convolutional wavelet neural network (CWNN) is designed and trained to classify testing samples into changed or unchanged classes, coupled with a deep convolutional generative adversarial network (DCGAN) to increase the number of changed class within the pseudo-label training samples. Numerical experiments on four real SAR datasets demonstrate the validity and robustness of the proposed approach, achieving up to 99.61% accuracy for small area change detection.
△ Less
Submitted 22 November, 2020;
originally announced November 2020.
-
Multi-Attention-Network for Semantic Segmentation of Fine Resolution Remote Sensing Images
Authors:
Rui Li,
Shunyi Zheng,
Chenxi Duan,
Ce Zhang,
Jianlin Su,
P. M. Atkinson
Abstract:
Semantic segmentation of remote sensing images plays an important role in a wide range of applications including land resource management, biosphere monitoring and urban planning. Although the accuracy of semantic segmentation in remote sensing images has been increased significantly by deep convolutional neural networks, several limitations exist in standard models. First, for encoder-decoder arc…
▽ More
Semantic segmentation of remote sensing images plays an important role in a wide range of applications including land resource management, biosphere monitoring and urban planning. Although the accuracy of semantic segmentation in remote sensing images has been increased significantly by deep convolutional neural networks, several limitations exist in standard models. First, for encoder-decoder architectures such as U-Net, the utilization of multi-scale features causes the underuse of information, where low-level features and high-level features are concatenated directly without any refinement. Second, long-range dependencies of feature maps are insufficiently explored, resulting in sub-optimal feature representations associated with each semantic class. Third, even though the dot-product attention mechanism has been introduced and utilized in semantic segmentation to model long-range dependencies, the large time and space demands of attention impede the actual usage of attention in application scenarios with large-scale input. This paper proposed a Multi-Attention-Network (MANet) to address these issues by extracting contextual dependencies through multiple efficient attention modules. A novel attention mechanism of kernel attention with linear complexity is proposed to alleviate the large computational demand in attention. Based on kernel attention and channel attention, we integrate local feature maps extracted by ResNeXt-101 with their corresponding global dependencies and reweight interdependent channel maps adaptively. Numerical experiments on three large-scale fine resolution remote sensing images captured by different satellite sensors demonstrate the superior performance of the proposed MANet, outperforming the DeepLab V3+, PSPNet, FastFCN, DANet, OCRNet, and other benchmark approaches.
△ Less
Submitted 23 November, 2020; v1 submitted 3 September, 2020;
originally announced September 2020.
-
MACU-Net for Semantic Segmentation of Fine-Resolution Remotely Sensed Images
Authors:
Rui Li,
Chenxi Duan,
Shunyi Zheng,
Ce Zhang,
Peter M. Atkinson
Abstract:
Semantic segmentation of remotely sensed images plays an important role in land resource management, yield estimation, and economic assessment. U-Net, a deep encoder-decoder architecture, has been used frequently for image segmentation with high accuracy. In this Letter, we incorporate multi-scale features generated by different layers of U-Net and design a multi-scale skip connected and asymmetri…
▽ More
Semantic segmentation of remotely sensed images plays an important role in land resource management, yield estimation, and economic assessment. U-Net, a deep encoder-decoder architecture, has been used frequently for image segmentation with high accuracy. In this Letter, we incorporate multi-scale features generated by different layers of U-Net and design a multi-scale skip connected and asymmetric-convolution-based U-Net (MACU-Net), for segmentation using fine-resolution remotely sensed images. Our design has the following advantages: (1) The multi-scale skip connections combine and realign semantic features contained in both low-level and high-level feature maps; (2) the asymmetric convolution block strengthens the feature representation and feature extraction capability of a standard convolution layer. Experiments conducted on two remotely sensed datasets captured by different satellite sensors demonstrate that the proposed MACU-Net transcends the U-Net, U-NetPPL, U-Net 3+, amongst other benchmark approaches. Code is available at https://github.com/lironui/MACU-Net.
△ Less
Submitted 4 May, 2022; v1 submitted 26 July, 2020;
originally announced July 2020.
-
A Robust Imbalanced SAR Image Change Detection Approach Based on Deep Difference Image and PCANet
Authors:
Xinzheng Zhang,
Hang Su,
Ce Zhang,
Peter M. Atkinson,
Xiaoheng Tan,
Xiaoping Zeng,
Xin Jian
Abstract:
In this research, a novel robust change detection approach is presented for imbalanced multi-temporal synthetic aperture radar (SAR) image based on deep learning. Our main contribution is to develop a novel method for generating difference image and a parallel fuzzy c-means (FCM) clustering method. The main steps of our proposed approach are as follows: 1) Inspired by convolution and pooling in de…
▽ More
In this research, a novel robust change detection approach is presented for imbalanced multi-temporal synthetic aperture radar (SAR) image based on deep learning. Our main contribution is to develop a novel method for generating difference image and a parallel fuzzy c-means (FCM) clustering method. The main steps of our proposed approach are as follows: 1) Inspired by convolution and pooling in deep learning, a deep difference image (DDI) is obtained based on parameterized pooling leading to better speckle suppression and feature enhancement than traditional difference images. 2) Two different parameter Sigmoid nonlinear mapping are applied to the DDI to get two mapped DDIs. Parallel FCM are utilized on these two mapped DDIs to obtain three types of pseudo-label pixels, namely, changed pixels, unchanged pixels, and intermediate pixels. 3) A PCANet with support vector machine (SVM) are trained to classify intermediate pixels to be changed or unchanged. Three imbalanced multi-temporal SAR image sets are used for change detection experiments. The experimental results demonstrate that the proposed approach is effective and robust for imbalanced SAR data, and achieve up to 99.52% change detection accuracy superior to most state-of-the-art methods.
△ Less
Submitted 3 March, 2020;
originally announced March 2020.
-
Two-Phase Object-Based Deep Learning for Multi-temporal SAR Image Change Detection
Authors:
Xinzheng Zhang,
Guo Liu,
Ce Zhang,
Peter M Atkinson,
Xiaoheng Tan,
Xin Jian,
Xichuan Zhou,
Yongming Li
Abstract:
Change detection is one of the fundamental applications of synthetic aperture radar (SAR) images. However, speckle noise presented in SAR images has a much negative effect on change detection. In this research, a novel two-phase object-based deep learning approach is proposed for multi-temporal SAR image change detection. Compared with traditional methods, the proposed approach brings two main inn…
▽ More
Change detection is one of the fundamental applications of synthetic aperture radar (SAR) images. However, speckle noise presented in SAR images has a much negative effect on change detection. In this research, a novel two-phase object-based deep learning approach is proposed for multi-temporal SAR image change detection. Compared with traditional methods, the proposed approach brings two main innovations. One is to classify all pixels into three categories rather than two categories: unchanged pixels, changed pixels caused by strong speckle (false changes), and changed pixels formed by real terrain variation (real changes). The other is to group neighboring pixels into segmented into superpixel objects (from pixels) such as to exploit local spatial context. Two phases are designed in the methodology: 1) Generate objects based on the simple linear iterative clustering algorithm, and discriminate these objects into changed and unchanged classes using fuzzy c-means (FCM) clustering and a deep PCANet. The prediction of this Phase is the set of changed and unchanged superpixels. 2) Deep learning on the pixel sets over the changed superpixels only, obtained in the first phase, to discriminate real changes from false changes. SLIC is employed again to achieve new superpixels in the second phase. Low rank and sparse decomposition are applied to these new superpixels to suppress speckle noise significantly. A further clustering step is applied to these new superpixels via FCM. A new PCANet is then trained to classify two kinds of changed superpixels to achieve the final change maps. Numerical experiments demonstrate that, compared with benchmark methods, the proposed approach can distinguish real changes from false changes effectively with significantly reduced false alarm rates, and achieve up to 99.71% change detection accuracy using multi-temporal SAR imagery.
△ Less
Submitted 17 January, 2020;
originally announced January 2020.
-
Thermal conductivity of Bi$_2$Se$_3$ from bulk to thin films: theory and experiment
Authors:
Lorenzo Paulatto,
Danièle Fournier,
Massimiliano Marangolo,
Mahmoud Eddrief,
Paola Atkinson,
Matteo Calandra
Abstract:
We calculate the lattice-driven in-plane $(κ_{\parallel})$ and out-of-plane $(κ_{\perp})$ thermal conductivities of Bi$_2$Se$_3$ bulk, and of films of different thicknesses, using the Boltzmann equation with phonon scattering times obtained from anharmonic third order density functional perturbation theory.
We compare our results for the lattice component of the thermal conductivity with publish…
▽ More
We calculate the lattice-driven in-plane $(κ_{\parallel})$ and out-of-plane $(κ_{\perp})$ thermal conductivities of Bi$_2$Se$_3$ bulk, and of films of different thicknesses, using the Boltzmann equation with phonon scattering times obtained from anharmonic third order density functional perturbation theory.
We compare our results for the lattice component of the thermal conductivity with published data for $κ_{\parallel}$ on bulk samples and with our room-temperature thermoreflectance measurements of $κ_{\perp}$ on films of thickness (L) ranging from 18~nm to 191~nm, where the lattice component has been extracted via the Wiedemann-Franz law. Ab-initio theoretical calculations on bulk samples, including an effective model to account for finite sample thickness and defect scattering, compare favorably both for the bulk case (from literature) and thin films (new measurements). In the low-T limit the theoretical in-plane lattice thermal conductivity of bulk Bi$_2$Se$_3$ agrees with previous measurements by assuming the occurrence of intercalated Bi$_2$ layer defects. The measured thermal conductivity monotonically decreases by reducing $L$, its value is $κ_{\perp}\approx 0.39\pm 0.08$~W/m$\cdot$K for $L=18$ nm and $κ_{\perp}=0.68\pm0.14$~W/m$\cdot$K for $L=191$ nm. We show that the decrease of room-temperature $κ_{\perp}$ in Bi$_2$Se$_3$ thin films as a function of sample thickness can be explained by the incoherent scattering of out-of-plane momentum phonons with the film surface. Our work outlines the crucial role of sample thinning in reducing the out-of-plane thermal conductivity.
△ Less
Submitted 23 March, 2020; v1 submitted 13 December, 2019;
originally announced December 2019.
-
Hyperfine constants and line separations for the $^{1}S_{0}-\,^{3}P_{1}$ intercombination line in neutral ytterbium with sub-Doppler resolution
Authors:
Peggy E. Atkinson,
Jesse S. Schelfhout,
John J. McFerran
Abstract:
Optical frequency measurements of the intercombination line $(6s^{2})\,^{1}S_{0} -(6s6p)\,^{3}P_{1}$ in the isotopes of ytterbium are carried out with the use of sub-Doppler fluorescence spectroscopy on an atomic beam. A dispersive signal is generated to which a master laser is locked, while frequency counting of an auxiliary beat signal is performed via a frequency comb referenced to a hydrogen m…
▽ More
Optical frequency measurements of the intercombination line $(6s^{2})\,^{1}S_{0} -(6s6p)\,^{3}P_{1}$ in the isotopes of ytterbium are carried out with the use of sub-Doppler fluorescence spectroscopy on an atomic beam. A dispersive signal is generated to which a master laser is locked, while frequency counting of an auxiliary beat signal is performed via a frequency comb referenced to a hydrogen maser. The relative separations between the lines are used to evaluate the $^{3}P_{1}$-level magnetic dipole and electric quadrupole constants for the fermionic isotopes. The center of gravity for the $^3P_1$ levels in $^{171}$Yb and $^{173}$Yb are also evaluated, where we find significant disagreement with previously reported values. These hyperfine constants provide a valuable litmus test for atomic many-body computations in ytterbium.
△ Less
Submitted 9 August, 2019;
originally announced August 2019.
-
Multisource and Multitemporal Data Fusion in Remote Sensing
Authors:
Pedram Ghamisi,
Behnood Rasti,
Naoto Yokoya,
Qunming Wang,
Bernhard Hofle,
Lorenzo Bruzzone,
Francesca Bovolo,
Mingmin Chi,
Katharina Anders,
Richard Gloaguen,
Peter M. Atkinson,
Jon Atli Benediktsson
Abstract:
The sharp and recent increase in the availability of data captured by different sensors combined with their considerably heterogeneous natures poses a serious challenge for the effective and efficient processing of remotely sensed data. Such an increase in remote sensing and ancillary datasets, however, opens up the possibility of utilizing multimodal datasets in a joint manner to further improve…
▽ More
The sharp and recent increase in the availability of data captured by different sensors combined with their considerably heterogeneous natures poses a serious challenge for the effective and efficient processing of remotely sensed data. Such an increase in remote sensing and ancillary datasets, however, opens up the possibility of utilizing multimodal datasets in a joint manner to further improve the performance of the processing approaches with respect to the application at hand. Multisource data fusion has, therefore, received enormous attention from researchers worldwide for a wide variety of applications. Moreover, thanks to the revisit capability of several spaceborne sensors, the integration of the temporal information with the spatial and/or spectral/backscattering information of the remotely sensed data is possible and helps to move from a representation of 2D/3D data to 4D data structures, where the time variable adds new information as well as challenges for the information extraction algorithms. There are a huge number of research works dedicated to multisource and multitemporal data fusion, but the methods for the fusion of different modalities have expanded in different paths according to each research community. This paper brings together the advances of multisource and multitemporal data fusion approaches with respect to different research communities and provides a thorough and discipline-specific starting point for researchers at different levels (i.e., students, researchers, and senior researchers) willing to conduct novel investigations on this challenging topic by supplying sufficient detail and references.
△ Less
Submitted 19 December, 2018;
originally announced December 2018.
-
High spectral resolution of GaAs/AlAs phononic cavities by subharmonic resonant pump-probe excitation
Authors:
Camille Lagoin,
Bernard Perrin,
Paola Atkinson,
Daniel Garcia-Sanchez
Abstract:
We present here precise measurement of the resonance frequency, lifetime and shape of confined acoustic modes in the tens of GHz regime in GaAs/AlAs superlattice planar and micropillar cavities at low temperature ($\sim 20\,\textrm{K}$). The subharmonic resonant pump-probe technique, where the repetition rate of the pump laser is tuned to a subharmonic of the cavity resonance to maximize the ampli…
▽ More
We present here precise measurement of the resonance frequency, lifetime and shape of confined acoustic modes in the tens of GHz regime in GaAs/AlAs superlattice planar and micropillar cavities at low temperature ($\sim 20\,\textrm{K}$). The subharmonic resonant pump-probe technique, where the repetition rate of the pump laser is tuned to a subharmonic of the cavity resonance to maximize the amplitude of the acoustic resonance, in combination with a Sagnac interferometer technique for high sensitivity ($\sim 10 \,\textrm{fm}$) to the surface displacement, has been used. The cavity fundamental mode at $\sim 20\,\textrm{GHz}$ and the higher order cavity harmonics up to $\sim 180\,\textrm{GHz}$ have been clearly resolved. Mechanical Q-values up to $2.7 \times 10^4$ have been measured in a planar superlattice, and direct spatial mapping of confined acoustic modes in a superlattice cavity micropillar has been demonstrated. The Q-frequency product obtained is $ \sim 5 \times 10^{14}$ demonstrating the suitability of these superlattice cavities for optomechanical applications.
△ Less
Submitted 22 September, 2018;
originally announced September 2018.
-
Spin-Orbit induced phase-shift in Bi$_{2}$Se$_{3}$ Josephson junctions
Authors:
Alexandre Assouline,
Cheryl Feuillet-Palma,
Nicolas Bergeal,
Tianzhen Zhang,
Alireza Mottaghizadeh,
Alexandre Zimmers,
Emmanuel Lhuillier,
Mahmoud Eddrief,
Paola Atkinson,
Marco Aprili,
Herve Aubin
Abstract:
The transmission of Cooper pairs between two weakly coupled superconductors produces a superfluid current and a phase difference; the celebrated Josephson effect. Because of time-reversal and parity symmetries, there is no Josephson current without a phase difference between two superconductors. Reciprocally, when those two symmetries are broken, an anomalous supercurrent can exist in the absence…
▽ More
The transmission of Cooper pairs between two weakly coupled superconductors produces a superfluid current and a phase difference; the celebrated Josephson effect. Because of time-reversal and parity symmetries, there is no Josephson current without a phase difference between two superconductors. Reciprocally, when those two symmetries are broken, an anomalous supercurrent can exist in the absence of phase bias or, equivalently, an anomalous phase shift $\varphi_0$ can exist in the absence of a superfluid current. We report on the observation of an anomalous phase shift $\varphi_0$ in hybrid Josephson junctions fabricated with the topological insulator Bi$_2$Se$_3$ submitted to an in-plane magnetic field. This anomalous phase shift $\varphi_0$ is observed directly through measurements of the current-phase relationship in a Josephson interferometer. This result provides a direct measurement of the spin-orbit coupling strength and open new possibilities for phase-controlled Josephson devices made from materials with strong spin-orbit coupling.
△ Less
Submitted 25 January, 2019; v1 submitted 4 June, 2018;
originally announced June 2018.
-
Magnetic Levitation Stabilized by Streaming Fluid Flows
Authors:
K. A. Baldwin,
J. -B. de Fouchier,
P. Atkinson,
R. J. A. Hill,
M. R. Swift,
D. J. Fairhurst
Abstract:
We demonstrate that the ubiquitous laboratory magnetic stirrer provides a simple passive method of magnetic levitation, in which the so-called `flea' levitates indefinitely. We study the onset of levitation and quantify the flea's motion (a combination of vertical oscillation, spinning and "waggling"), finding excellent agreement with a mechanical analytical model. The waggling motion drives recir…
▽ More
We demonstrate that the ubiquitous laboratory magnetic stirrer provides a simple passive method of magnetic levitation, in which the so-called `flea' levitates indefinitely. We study the onset of levitation and quantify the flea's motion (a combination of vertical oscillation, spinning and "waggling"), finding excellent agreement with a mechanical analytical model. The waggling motion drives recirculating flow, producing a centripetal reaction force that stabilises the flea. Our findings have implications for the locomotion of artificial swimmers, for the development of bidirectional microfluidic pumps and provide an alternative to sophisticated commercial levitators.
△ Less
Submitted 24 May, 2018; v1 submitted 22 May, 2018;
originally announced May 2018.
-
Coupling a single solid state quantum emitter to an array of resonant plasmonic antennas
Authors:
Markus Pfeiffer,
Paola Atkinson,
Armando Rastelli,
Oliver G. Schmidt,
Harald Giessen,
Markus Lippitz,
Klas Lindfors
Abstract:
Plasmon resonant arrays or meta-surfaces shape both the incoming optical field and the local density of states for emission processes. They provide large regions of enhanced emission from emitters and greater design flexibility than single nanoantennas. This makes them of great interest for engineering optical absorption and emission. Here we study the coupling of a single quantum emitter, a self-…
▽ More
Plasmon resonant arrays or meta-surfaces shape both the incoming optical field and the local density of states for emission processes. They provide large regions of enhanced emission from emitters and greater design flexibility than single nanoantennas. This makes them of great interest for engineering optical absorption and emission. Here we study the coupling of a single quantum emitter, a self-assembled semiconductor quantum dot, to a plasmonic meta-surface. We investigate the influence of the spectral properties of the nanoantennas and the position of the emitter in the unit cell of the structure. We observe a resonant enhancement due to emitter-array coupling in the far-field regime and find a clear difference from the interaction of an emitter with a single antenna.
△ Less
Submitted 10 January, 2018;
originally announced January 2018.
-
Multiharmonic frequency-chirped transducers for surface-acoustic-wave optomechanics
Authors:
Matthias Weiß,
Andreas L. Hörner,
Eugenio Zallo,
Paola Atkinson,
Armando Rastelli,
Oliver G. Schmidt,
Achim Wixforth,
Hubert J. Krenner
Abstract:
Wide passband interdigital transducers are employed to establish a stable phase-lock between a train of laser pulses emitted by a mode-locked laser and a surface acoustic wave generated electrically by the transducer. The transducer design is based on a multi-harmonic split-finger architecture for the excitation of a fundamental surface acoustic wave and a discrete number of its overtones. Simply…
▽ More
Wide passband interdigital transducers are employed to establish a stable phase-lock between a train of laser pulses emitted by a mode-locked laser and a surface acoustic wave generated electrically by the transducer. The transducer design is based on a multi-harmonic split-finger architecture for the excitation of a fundamental surface acoustic wave and a discrete number of its overtones. Simply by introducing a variation of the transducer's periodicity $p$, a frequency chirp is added. This combination results in wide frequency bands for each harmonic. The transducer's conversion efficiency from the electrical to the acoustic domain was characterized optomechanically using single quantum dots acting as nanoscale pressure sensors. The ability to generate surface acoustic waves over a wide band of frequencies enables advanced acousto-optic spectroscopy using mode-locked lasers with fixed repetition rate. Stable phase-locking between the electrically generated acoustic wave and the train of laser pulses was confirmed by performing stroboscopic spectroscopy on a single quantum dot at a frequency of 320 MHz. Finally, the dynamic spectral modulation of the quantum dot was directly monitored in the time domain combining stable phase-locked optical excitation and time-correlated single photon counting. The demonstrated scheme will be particularly useful for the experimental implementation of surface acoustic wave-driven quantum gates of optically addressable qubits or collective quantum states or for multi-component Fourier synthesis of tailored nanomechanical waveforms.
△ Less
Submitted 29 October, 2017; v1 submitted 1 August, 2017;
originally announced August 2017.
-
Asteroid Impact Effects And Their Immediate Hazards For Human Populations
Authors:
Clemens M. Rumpf,
Hugh G. Lewis,
Peter M. Atkinson
Abstract:
A set of 50,000 artificial Earth impacting asteroids was used to obtain, for the first time, information about the dominance of individual impact effects such as wind blast, overpressure shock, thermal radiation, cratering, seismic shaking, ejecta deposition and tsunami for the loss of human life during an impact event for impactor sizes between 15 to 400 m and how the dominance of impact effects…
▽ More
A set of 50,000 artificial Earth impacting asteroids was used to obtain, for the first time, information about the dominance of individual impact effects such as wind blast, overpressure shock, thermal radiation, cratering, seismic shaking, ejecta deposition and tsunami for the loss of human life during an impact event for impactor sizes between 15 to 400 m and how the dominance of impact effects changes over size. Information about the dominance of each impact effect can enable disaster managers to plan for the most relevant effects in the event of an asteroid impact. Furthermore, the analysis of average casualty numbers per impactor shows that there is a significant difference in expected loss for airburst and surface impacts and that the average impact over land is an order of magnitude more dangerous than one over water.
△ Less
Submitted 28 March, 2017; v1 submitted 22 March, 2017;
originally announced March 2017.
-
Population Vulnerability Models for Asteroid Impact Risk Assessment
Authors:
Clemens M. Rumpf,
Hugh G. Lewis,
Peter M. Atkinson
Abstract:
An asteroid impact is a low probability event with potentially devastating consequences. The Asteroid Risk Mitigation Optimization and Research (ARMOR) software tool calculates whether a colliding asteroid experiences an airburst or surface impact and calculates effect severity as well as reach on the global map. To calculate the consequences of an impact in terms of loss of human life, new vulner…
▽ More
An asteroid impact is a low probability event with potentially devastating consequences. The Asteroid Risk Mitigation Optimization and Research (ARMOR) software tool calculates whether a colliding asteroid experiences an airburst or surface impact and calculates effect severity as well as reach on the global map. To calculate the consequences of an impact in terms of loss of human life, new vulnerability models are derived that connect the severity of seven impact effects (strong winds, overpressure shockwave, thermal radiation, seismic shaking, ejecta deposition, cratering and tsunamis) with lethality to human populations. With the new vulnerability models ARMOR estimates casualties of an impact under consideration of the local population and geography. The presented algorithms and models are employed in two case studies to estimate total casualties as well as the damage contribution of each impact effect. The case studies highlight that aerothermal effects are most harmful except for deep water impacts, where tsunamis are the dominant hazard. Continental shelves serve a protective function against the tsunami hazard caused by impactors on the shelf. Furthermore, the calculation of impact consequences facilitates asteroid risk estimation to better characterize a given threat and the concept of risk as well as its applicability to the asteroid impact scenario are presented.
△ Less
Submitted 19 February, 2017;
originally announced February 2017.
-
On the influence of impact effect modelling for global asteroid impact risk distribution
Authors:
Clemens M. Rumpf,
Hugh G. Lewis,
Peter M. Atkinson
Abstract:
ESA and NASA maintain asteroid hazard lists that contain all known asteroids with a non zero chance of colliding with the Earth in the future. Some software tools exist that are, either, capable of calculating the impact points of those asteroids, or that can estimate the impact effects of a given impact incident. However, no single tool is available that combines both aspects and enables a compre…
▽ More
ESA and NASA maintain asteroid hazard lists that contain all known asteroids with a non zero chance of colliding with the Earth in the future. Some software tools exist that are, either, capable of calculating the impact points of those asteroids, or that can estimate the impact effects of a given impact incident. However, no single tool is available that combines both aspects and enables a comprehensive risk analysis. The question is, thus, whether tools that can calculate impact location may be used to obtain a qualitative understanding of the asteroid impact risk distribution. To answer this question, two impact risk distributions that control for impact effect modelling were generated and compared. The Asteroid Risk Mitigation Optimization and Research (ARMOR) tool, in conjunction with the freely available software OrbFit, was used to project the impact probabilities of listed asteroids with a minimum diameter of 30 m onto the surface of the Earth representing a random sample (15% of all objects) of the hazard list. The resulting 261 impact corridors were visualized on a global map. Furthermore, the impact corridors were combined with Earth population data to estimate the simplified risk (without impact effects) and advanced risk (with impact effects) associated with the direct asteroid impacts that each nation faces from present to 2100 based on this sample. The relationship between risk and population size was examined for the 40 most populous countries and it was apparent that population size is a good proxy for relative risk. The advanced and simplified risk distributions were compared and the alteration of the results based on the introduction of physical impact effects was discussed. Population remained a valid proxy for relative impact risk, but the inclusion of impact effects resulted in significantly different risks, especially when considered at the national level.
△ Less
Submitted 24 August, 2016;
originally announced August 2016.
-
Acoustic confinement in superlattice cavities
Authors:
Daniel Garcia-Sanchez,
Samuel Déleglise,
Jean-Louis Thomas,
Paola Atkinson,
Camille Lagoin,
Bernard Perrin
Abstract:
The large coupling rate between the acoustic and optical fields confined in GaAs/AlAs superlattice cavities makes them appealing systems for cavity optomechanics. We have developed a mathematical model based on the scattering matrix that allows the acoustic guided modes to be predicted in nano and micropillar superlattice cavities. We demonstrate here that the reflection at the surface boundary co…
▽ More
The large coupling rate between the acoustic and optical fields confined in GaAs/AlAs superlattice cavities makes them appealing systems for cavity optomechanics. We have developed a mathematical model based on the scattering matrix that allows the acoustic guided modes to be predicted in nano and micropillar superlattice cavities. We demonstrate here that the reflection at the surface boundary considerably modifies the acoustic quality factor and leads to significant confinement at the micropillar center. Our mathematical model also predicts unprecedented acoustic Fano resonances on nanopillars featuring small mode volumes and very high mechanical quality factors, making them attractive systems for optomechanical applications.
△ Less
Submitted 28 September, 2016; v1 submitted 7 June, 2016;
originally announced June 2016.
-
Fast atom diffraction inside a molecular beam epitaxy chamber, a rich combination
Authors:
M. Debiossac,
P. Atkinson,
A. Zugarramurdi,
M. Eddrief,
F. Finocchi,
V. H. Etgens,
A. Momeni,
H. Khemliche,
A. G. Borisov,
P. Roncin
Abstract:
Two aspects of the contribution of grazing incidence fast atom diffraction (GIFAD) to molecular beam epitaxy (MBE) are reviewed here: the ability of GIFAD to provide \emph{in-situ} a precise description of the atomic-scale surface topology, and its ability to follow larger-scale changes in surface roughness during layer-by-layer growth. Recent experimental and theoretical results obtained for the…
▽ More
Two aspects of the contribution of grazing incidence fast atom diffraction (GIFAD) to molecular beam epitaxy (MBE) are reviewed here: the ability of GIFAD to provide \emph{in-situ} a precise description of the atomic-scale surface topology, and its ability to follow larger-scale changes in surface roughness during layer-by-layer growth. Recent experimental and theoretical results obtained for the He atom beam incident along the highly corrugated $[ 1\bar{1}0 ]$ direction of the $β_{2}$(2$\times$4) reconstructed GaAs(001) surface are summarized and complemented by the measurements and calculations for the beam incidence along the weakly corrugated [010] direction where a periodicity twice smaller as expected is observed. The combination of the experiment, quantum scattering matrix calculations, and semiclassical analysis allows in this case to reveal structural characteristics of the surface. For the in situ measurements of GIFAD during molecular beam epitaxy of GaAs on GaAs surface we analyse the change in elastic and inelastic contributions in the scattered beam, and the variation of the diffraction pattern in polar angle scattering. This analysis outlines the robustness, the simplicity and the richness of the GIFAD as a technique to monitor the layer-by-layer epitaxial growth.
△ Less
Submitted 30 December, 2015;
originally announced December 2015.
-
The global impact distribution of Near-Earth objects
Authors:
Clemens Rumpf,
Hugh G. Lewis,
Peter M. Atkinson
Abstract:
Asteroids that could collide with the Earth are listed on the publicly available Near-Earth object (NEO) hazard web sites maintained by the US and European space agencies (NASA and ESA). The impact probability distribution of 69 potentially threatening NEOs from these lists that produce 261 dynamically distinct impact instances, or Virtual Impactors (VIs), were calculated using the Asteroid Risk M…
▽ More
Asteroids that could collide with the Earth are listed on the publicly available Near-Earth object (NEO) hazard web sites maintained by the US and European space agencies (NASA and ESA). The impact probability distribution of 69 potentially threatening NEOs from these lists that produce 261 dynamically distinct impact instances, or Virtual Impactors (VIs), were calculated using the Asteroid Risk Mitigation and Optimization Research (ARMOR) tool in conjunction with OrbFit. ARMOR projected the impact probability of each VI onto the surface of the Earth as a spatial probability distribution. The projection considers orbit solution accuracy and the global impact probability. The method of ARMOR is introduced and the tool is validated against two asteroid-Earth collision cases with objects 2008 TC3 and 2014 AA. In the analysis, the natural distribution of impact corridors is contrasted against the impact probability distribution to evaluate the distributions conformity with the uniform impact distribution assumption. The distribution of impact corridors is based on the NEO population and orbital mechanics. The analysis shows that the distribution of impact corridors matches the common assumption of uniform impact distribution and the result extends the evidence base for the uniform assumption from qualitative analysis of historic impact events into the future in a quantitative way. This finding is confirmed in a parallel analysis of impact points belonging to a synthetic population of 10006 VIs. Taking into account the impact probabilities introduced significant variation into the results and the impact probability distribution, consequently, deviates markedly from uniformity. The concept of impact probabilities is a product of the asteroid observation and orbit determination technique and, thus, represents a man-made component that is largely disconnected from natural processes.
△ Less
Submitted 30 November, 2015;
originally announced November 2015.
-
Fourier synthesis of radio frequency nanomechanical pulses with different shapes
Authors:
Florian J. R. Schülein,
Eugenio Zallo,
Paola Atkinson,
Oliver G. Schmidt,
Rinaldo Trotta,
Armando Rastelli,
Achim Wixforth,
Hubert J. Krenner
Abstract:
The concept of Fourier synthesis is heavily employed in both consumer electronic products and fundamental research. In the latter, pulse shaping is key to dynamically initialize, probe and manipulate the state of classical or quantum systems. In nuclear magnetic resonance, for instance, shaped pulses have a long-standing tradition and the underlying fundamental concepts have subsequently been succ…
▽ More
The concept of Fourier synthesis is heavily employed in both consumer electronic products and fundamental research. In the latter, pulse shaping is key to dynamically initialize, probe and manipulate the state of classical or quantum systems. In nuclear magnetic resonance, for instance, shaped pulses have a long-standing tradition and the underlying fundamental concepts have subsequently been successfully extended to optical frequencies and even to implement quantum gate operations. Transferring these paradigms to nanomechanical systems requires tailored nanomechanical waveforms. Here, we report on an additive Fourier synthesizer for nanomechanical waveforms based on monochromatic surface acoustic waves. As a proof of concept, we electrically synthesize four different elementary nanomechanical waveforms from a fundamental surface acoustic wave at $ f_1 \sim 150$ MHz using a superposition of up to three discrete harmonics $f_n$. We employ these shaped pulses to interact with an individual sensor quantum dot and detect their deliberately and temporally modulated strain component via the opto-mechanical quantum dot response. Importantly, and in contrast to the direct mechanical actuation by bulk piezoactuators, surface acoustic waves provide much higher frequencies (> 20 GHz) to resonantly drive mechanical motion. Thus, our technique uniquely allows coherent mechanical control of localized vibronic modes of optomechanical crystals, even in the quantum limit when cooled to the vibrational ground state.
△ Less
Submitted 12 January, 2016; v1 submitted 2 December, 2014;
originally announced December 2014.
-
An artificial atom locked to natural atoms
Authors:
N. Akopian,
R. Trotta,
E. Zallo,
S. Kumar,
P. Atkinson,
A. Rastelli,
O. G. Schmidt,
V. Zwiller
Abstract:
Single-photon sources that emit photons at the same energy play a key role in the emerging concepts of quantum information, such as entanglement swapping, quantum teleportation and quantum networks. They can be realized in a variety of systems, where semiconductor quantum dots, or 'artificial atoms', are arguably among the most attractive. However, unlike 'natural atoms', no two artificial atoms a…
▽ More
Single-photon sources that emit photons at the same energy play a key role in the emerging concepts of quantum information, such as entanglement swapping, quantum teleportation and quantum networks. They can be realized in a variety of systems, where semiconductor quantum dots, or 'artificial atoms', are arguably among the most attractive. However, unlike 'natural atoms', no two artificial atoms are alike. This peculiarity is a serious hurdle for quantum information applications that require photonic quantum states with identical energies. Here we demonstrate a single artificial atom that generates photons with an absolute energy that is locked to an optical transition in a natural atom. Furthermore, we show that our system is robust and immune to drifts and fluctuations in the environment of the emitter. Our demonstration is crucial for realization of a large number of universally-indistinguishable solid-state systems at arbitrary remote locations, where frequency-locked artificial atoms might become fundamental ingredients.
△ Less
Submitted 8 February, 2013;
originally announced February 2013.
-
Universal recovery of the bright-exciton level-degeneracy in quantum dots without structural symmetry
Authors:
R. Trotta,
E. Zallo,
C. Ortix,
P. Atkinson,
J. D. Plumhof,
J. van den Brink,
A. Rastelli,
O. G. Schmidt
Abstract:
The lack of structural symmetry which usually characterizes semiconductor quantum dots lifts the energetic degeneracy of the bright excitonic states and hampers severely their use as high fidelity sources of entangled photons. We demonstrate experimentally and theoretically that it is always possible to restore the excitonic degeneracy by the simultaneous application of large strain and electric f…
▽ More
The lack of structural symmetry which usually characterizes semiconductor quantum dots lifts the energetic degeneracy of the bright excitonic states and hampers severely their use as high fidelity sources of entangled photons. We demonstrate experimentally and theoretically that it is always possible to restore the excitonic degeneracy by the simultaneous application of large strain and electric fields, despite the fact that this possibility has fundamentally been doubted. This is achieved by using one external perturbation to align the polarization of the exciton emission along the axis of the second perturbation, which then erases completely the energy splitting of the states. This result, which holds for any QD structure, highlights the potential of combining complementary external fields to create artificial atoms meeting the stringent requirements posed by scalable semiconductor-based quantum-technology.
△ Less
Submitted 7 June, 2012;
originally announced June 2012.
-
Lanchester Theory and the Fate of Armed Revolts
Authors:
Michael P. Atkinson,
Alexander Gutfraind,
Moshe Kress
Abstract:
Major revolts have recently erupted in parts of the Middle East with substantial international repercussions. Predicting, coping with and winning those revolts have become a grave problem for many regimes and for world powers. We propose a new model of such revolts that describes their evolution by building on the classic Lanchester theory of combat. The model accounts for the split in the populat…
▽ More
Major revolts have recently erupted in parts of the Middle East with substantial international repercussions. Predicting, coping with and winning those revolts have become a grave problem for many regimes and for world powers. We propose a new model of such revolts that describes their evolution by building on the classic Lanchester theory of combat. The model accounts for the split in the population between those loyal to the regime and those favoring the rebels. We show that, contrary to classical Lanchesterian insights regarding traditional force-on-force engagements, the outcome of a revolt is independent of the initial force sizes; it only depends on the fraction of the population supporting each side and their combat effectiveness. We also consider the effects of foreign intervention and of shifting loyalties of the two populations during the conflict. The model's predictions are consistent with the situations currently observed in Afghanistan, Libya and Syria (Spring 2011) and it offers tentative guidance on policy.
△ Less
Submitted 21 June, 2011;
originally announced June 2011.
-
Origin of the hysteresis in bilayer 2D systems in the quantum Hall regime
Authors:
L. H. Ho,
L. J. Taskinen,
A. P. Micolich,
A. R. Hamilton,
P. Atkinson,
D. A. Ritchie
Abstract:
The hysteresis observed in the magnetoresistance of bilayer 2D systems in the quantum Hall regime is generally attributed to the long time constant for charge transfer between the 2D systems due to the very low conductivity of the quantum Hall bulk states. We report electrometry measurements of a bilayer 2D system that demonstrate that the hysteresis is instead due to non-equilibrium induced curre…
▽ More
The hysteresis observed in the magnetoresistance of bilayer 2D systems in the quantum Hall regime is generally attributed to the long time constant for charge transfer between the 2D systems due to the very low conductivity of the quantum Hall bulk states. We report electrometry measurements of a bilayer 2D system that demonstrate that the hysteresis is instead due to non-equilibrium induced current. This finding is consistent with magnetometry and electrometry measurements of single 2D systems, and has important ramifications for understanding hysteresis in bilayer 2D systems.
△ Less
Submitted 28 September, 2010;
originally announced September 2010.
-
Enhancing the optical excitation efficiency of a single self-assembled quantum dot with a plasmonic nanoantenna
Authors:
Markus Pfeiffer,
Klas Lindfors,
Christian Wolpert,
Paola Atkinson,
Mohamed Benyoucef,
Armando Rastelli,
Oliver G. Schmidt,
Harald Giessen,
Markus Lippitz
Abstract:
We demonstrate how the controlled positioning of a plasmonic nanoparticle modifies the photoluminescence of a single epitaxial GaAs quantum dot. The antenna particle leads to an increase of the luminescence intensity by about a factor of eight. Spectrally and temporally resolved photoluminescence measurements prove an increase of the quantum dot's excitation rate. The combination of stable epitaxi…
▽ More
We demonstrate how the controlled positioning of a plasmonic nanoparticle modifies the photoluminescence of a single epitaxial GaAs quantum dot. The antenna particle leads to an increase of the luminescence intensity by about a factor of eight. Spectrally and temporally resolved photoluminescence measurements prove an increase of the quantum dot's excitation rate. The combination of stable epitaxial quantum emitters and plasmonic nanostructures promises to be highly beneficial for nanoscience and quantum optics.
△ Less
Submitted 21 July, 2010;
originally announced July 2010.
-
Charge and spin state readout of a double quantum dot coupled to a resonator
Authors:
K. D. Petersson,
C. G. Smith,
D. Anderson,
P. Atkinson,
G. A. C. Jones,
D. A. Ritchie
Abstract:
State readout is a key requirement for a quantum computer. For semiconductor-based qubit devices it is usually accomplished using a separate mesoscopic electrometer. Here we demonstrate a simple detection scheme in which a radio-frequency resonant circuit coupled to a semiconductor double quantum dot is used to probe its charge and spin states. These results demonstrate a new non-invasive techniqu…
▽ More
State readout is a key requirement for a quantum computer. For semiconductor-based qubit devices it is usually accomplished using a separate mesoscopic electrometer. Here we demonstrate a simple detection scheme in which a radio-frequency resonant circuit coupled to a semiconductor double quantum dot is used to probe its charge and spin states. These results demonstrate a new non-invasive technique for measuring charge and spin states in quantum dot systems without requiring a separate mesoscopic detector.
△ Less
Submitted 22 April, 2010;
originally announced April 2010.
-
Electrometry using the quantum Hall effect in a bilayer 2D electron system
Authors:
L. H. Ho,
L. J. Taskinen,
A. P. Micolich,
A. R. Hamilton,
P. Atkinson,
D. A. Ritchie
Abstract:
We discuss the development of a sensitive electrometer that utilizes a two-dimensional electron gas (2DEG) in the quantum Hall regime. As a demonstration, we measure the evolution of the Landau levels in a second, nearby 2DEG as the applied perpendicular magnetic field is changed, and extract an effective mass for electrons in GaAs that agrees within experimental error with previous measurements.
We discuss the development of a sensitive electrometer that utilizes a two-dimensional electron gas (2DEG) in the quantum Hall regime. As a demonstration, we measure the evolution of the Landau levels in a second, nearby 2DEG as the applied perpendicular magnetic field is changed, and extract an effective mass for electrons in GaAs that agrees within experimental error with previous measurements.
△ Less
Submitted 25 March, 2010;
originally announced March 2010.
-
Microwave-Driven Transitions in Two Coupled Semiconductor Charge Qubits
Authors:
K. D. Petersson,
C. G. Smith,
D. Anderson,
P. Atkinson,
G. A. C. Jones,
D. A. Ritchie
Abstract:
We have studied interactions between two capacitively coupled GaAs/AlGaAs few-electron double quantum dots. Each double quantum dot defines a tunable two-level system, or qubit, in which a single excess electron occupies either the ground state of one dot or the other. Applying microwave radiation we resonantly drive transitions between states and non-invasively measure occupancy changes using p…
▽ More
We have studied interactions between two capacitively coupled GaAs/AlGaAs few-electron double quantum dots. Each double quantum dot defines a tunable two-level system, or qubit, in which a single excess electron occupies either the ground state of one dot or the other. Applying microwave radiation we resonantly drive transitions between states and non-invasively measure occupancy changes using proximal quantum point contact charge detectors. The level structure of the interacting two-qubit system is probed by driving it at a fixed microwave frequency whilst varying the energy detuning of both double dots. We observe additional resonant transitions consistent with a simple coupled two-qubit Hamiltonian model.
△ Less
Submitted 14 July, 2009;
originally announced July 2009.
-
An e-Infrastructure for Collaborative Research in Human Embryo Development
Authors:
Adam Barker,
Jano I. van Hemert,
Richard A. Baldock,
Malcolm P. Atkinson
Abstract:
Within the context of the EU Design Study Developmental Gene Expression Map, we identify a set of challenges when facilitating collaborative research on early human embryo development. These challenges bring forth requirements, for which we have identified solutions and technology. We summarise our solutions and demonstrate how they integrate to form an e-infrastructure to support collaborative…
▽ More
Within the context of the EU Design Study Developmental Gene Expression Map, we identify a set of challenges when facilitating collaborative research on early human embryo development. These challenges bring forth requirements, for which we have identified solutions and technology. We summarise our solutions and demonstrate how they integrate to form an e-infrastructure to support collaborative research in this area of developmental biology.
△ Less
Submitted 15 January, 2009;
originally announced January 2009.
-
Post-selective two-photon interference from a continuous non-classical stream of photons emitted by a quantum dot
Authors:
R. B. Patel,
A. J. Bennett,
K. Cooper,
P. Atkinson,
C. A. Nicoll,
D. A. Ritchie,
A. J. Shields
Abstract:
We report an electrically driven semiconductor single photon source capable of emitting photons with a coherence time of up to 400 ps under fixed bias. It is shown that increasing the injection current causes the coherence time to reduce and this effect is well explained by the fast modulation of a fluctuating environment. Hong-Ou-Mandel type two-photon interference using a Mach-Zehnder interfer…
▽ More
We report an electrically driven semiconductor single photon source capable of emitting photons with a coherence time of up to 400 ps under fixed bias. It is shown that increasing the injection current causes the coherence time to reduce and this effect is well explained by the fast modulation of a fluctuating environment. Hong-Ou-Mandel type two-photon interference using a Mach-Zehnder interferometer is demonstrated using this source to test the indistinguishability of individual photons by post-selecting events where two photons collide at a beamsplitter. Finally, we consider how improvements in our detection system can be used to achieve a higher interference visibility.
△ Less
Submitted 11 April, 2008;
originally announced April 2008.
-
Biphoton interference with a quantum dot entangled light source
Authors:
R. M. Stevenson,
A. J. Hudson,
R. J. Young,
P. Atkinson,
K. Cooper,
D. A. Ritchie,
A. J. Shields
Abstract:
We demonstrate optical interferometry beyond the limits imposed by the photon wavelength using 'triggered' entangled photon pairs from a semiconductor quantum dot. Interference fringes of the entangled biphoton state reveals a periodicity half of that obtained with the single photon, and much less than that of the pump laser. High fringe visibility indicates that biphoton interference is less se…
▽ More
We demonstrate optical interferometry beyond the limits imposed by the photon wavelength using 'triggered' entangled photon pairs from a semiconductor quantum dot. Interference fringes of the entangled biphoton state reveals a periodicity half of that obtained with the single photon, and much less than that of the pump laser. High fringe visibility indicates that biphoton interference is less sensitive to decoherence than interference of two sequential single photons. The results suggest that quantum interferometry may be possible using a semiconductor LED-like device.
△ Less
Submitted 27 March, 2008;
originally announced March 2008.
-
Indistinguishable photons from a diode
Authors:
A. J. Bennett,
R. B. Patel,
A. J. Shields,
K. Cooper,
P. Atkinson,
C. A. Nicoll,
D. A. Ritchie
Abstract:
We generate indistinguishable photons from a semiconductor diode containing a InAs/GaAs quantum dot. Using an all-electrical technique to populate and control a single-photon emitting state we filter-out dephasing by Stark-shifting the emission energy on timescales below the dephasing time of the state. Mixing consecutive photons on a beam-splitter we observe two-photon interference with a visib…
▽ More
We generate indistinguishable photons from a semiconductor diode containing a InAs/GaAs quantum dot. Using an all-electrical technique to populate and control a single-photon emitting state we filter-out dephasing by Stark-shifting the emission energy on timescales below the dephasing time of the state. Mixing consecutive photons on a beam-splitter we observe two-photon interference with a visibility of 64%.
△ Less
Submitted 26 March, 2008;
originally announced March 2008.
-
Quantum key distribution using a triggered quantum dot source emitting near 1.3 microns
Authors:
P. M. Intallura,
M. B. Ward,
O. Z. Karimov,
Z. L. Yuan,
P. See,
A. J. Shields,
P. Atkinson,
D. A. Ritchie
Abstract:
We report the distribution of a cryptographic key, secure from photon number splitting attacks, over 35 km of optical fiber using single photons from an InAs quantum dot emitting ~1.3 microns in a pillar microcavity. Using below GaAs-bandgap optical excitation, we demonstrate suppression of multiphoton emission to 10% of the Poissonian level without detector dark count subtraction. The source is…
▽ More
We report the distribution of a cryptographic key, secure from photon number splitting attacks, over 35 km of optical fiber using single photons from an InAs quantum dot emitting ~1.3 microns in a pillar microcavity. Using below GaAs-bandgap optical excitation, we demonstrate suppression of multiphoton emission to 10% of the Poissonian level without detector dark count subtraction. The source is incorporated into a phase encoded interferometric scheme implementing the BB84 protocol for key distribution over standard telecommunication optical fiber. We show a transmission distance advantage over that possible with (length-optimized) uniform intensity weak coherent pulses at 1310 nm in the same system.
△ Less
Submitted 2 October, 2007;
originally announced October 2007.
-
Oxide-apertured microcavity single-photon emitting diode
Authors:
D. J. P. Ellis,
A. J. Bennett,
A. J. Shields,
P. Atkinson,
D. A. Ritchie
Abstract:
We have developed a microcavity single-photon source based on a single quantum dot within a planar cavity in which wet-oxidation of a high-aluminium content layer provides lateral confinement of both the photonic mode and the injection current. Lateral confinement of the optical mode in optically pumped structures produces a strong enhancement of the radiative decay rate. Using microcavity struc…
▽ More
We have developed a microcavity single-photon source based on a single quantum dot within a planar cavity in which wet-oxidation of a high-aluminium content layer provides lateral confinement of both the photonic mode and the injection current. Lateral confinement of the optical mode in optically pumped structures produces a strong enhancement of the radiative decay rate. Using microcavity structures with doped contact layers, we demonstrate a single-photon emitting diode where current may be injected into a single dot.
△ Less
Submitted 13 September, 2007;
originally announced September 2007.
-
Observation of the Purcell effect in high-index-contrast micropillar
Authors:
A. J. Bennett,
D. J. P. Ellis,
A. J. Shields,
P. Atkinson,
I. Farrer,
D. A. Ritchie
Abstract:
We have fabricated pillar microcavity samples with Bragg mirrors consisting of alternate layers of GaAs and Aluminium Oxide. Compared to the more widely studied GaAs/AlAs micropillars these mirrors can achieve higher reflectivities with fewer layer repeats and reduce the mode volume. We have studied a number of samples containing a low density of InGaAs/GaAs self assembled quantum dots in a cavi…
▽ More
We have fabricated pillar microcavity samples with Bragg mirrors consisting of alternate layers of GaAs and Aluminium Oxide. Compared to the more widely studied GaAs/AlAs micropillars these mirrors can achieve higher reflectivities with fewer layer repeats and reduce the mode volume. We have studied a number of samples containing a low density of InGaAs/GaAs self assembled quantum dots in a cavity and here report observation of a three fold enhancement in the radiative lifetime of a quantum dot exciton state due to the Purcell effect.
△ Less
Submitted 13 September, 2007;
originally announced September 2007.
-
Experimental position-time entanglement with degenerate single photons
Authors:
A. J. Bennett,
D. G. Gevaux,
Z. L. Yuan,
A. J. Shields,
P. Atkinson,
D. A. Ritchie
Abstract:
We report an experiment in which two-photon interference occurs between degenerate single photons that never meet. The two photons travel in opposite directions through our fibre-optic interferometer and interference occurs when the photons reach two different, spatially separated, 2-by-2 couplers at the same time. We show that this experiment is analogous to the conventional Franson-type entang…
▽ More
We report an experiment in which two-photon interference occurs between degenerate single photons that never meet. The two photons travel in opposite directions through our fibre-optic interferometer and interference occurs when the photons reach two different, spatially separated, 2-by-2 couplers at the same time. We show that this experiment is analogous to the conventional Franson-type entanglement experiment where the photons are entangled in position and time. We measure wavefunction overlaps for the two photons as high as 94 $\pm$ 3%.
△ Less
Submitted 6 February, 2008; v1 submitted 6 September, 2007;
originally announced September 2007.
-
Coherence of an Entangled Exciton-Photon State
Authors:
A. J. Hudson,
R. M. Stevenson,
A. J. Bennett,
R. J. Young,
C. A. Nicoll,
P. Atkinson,
K. Cooper,
D. A. Ritchie,
A. J. Shields
Abstract:
We study the effect of the exciton fine-structure splitting on the polarisation-entanglement of photon pairs produced by the biexciton cascade in a single quantum dot. The entanglement is found to persist despite separations between the intermediate energy levels of up to 4 micro-eV. Measurements demonstrate that entanglement of the photon pair is robust to the dephasing of the intermediate exci…
▽ More
We study the effect of the exciton fine-structure splitting on the polarisation-entanglement of photon pairs produced by the biexciton cascade in a single quantum dot. The entanglement is found to persist despite separations between the intermediate energy levels of up to 4 micro-eV. Measurements demonstrate that entanglement of the photon pair is robust to the dephasing of the intermediate exciton state responsible for the first order coherence time of either single photon. We present a theoretical framework taking into account the effects of spin-scattering, background light and dephasing. We distinguish between the first-order coherence time, and a parameter which we measure for the first time and define as the cross-coherence time.
△ Less
Submitted 4 October, 2007; v1 submitted 24 July, 2007;
originally announced July 2007.
-
Quantisation of Hopping Magnetoresistance Prefactor in Strongly Correlated Two-Dimensional Electron Systems
Authors:
Matthias Baenninger,
Arindam Ghosh,
Michael Pepper,
Harvey E. Beere,
Ian Farrer,
Paula Atkinson,
Dave A. Ritchie
Abstract:
We report an universal behaviour of hopping transport in strongly interacting mesoscopic two-dimensional electron systems (2DES). In a certain window of background disorder, the resistivity at low perpendicular magnetic fields follows the expected relation $ρ(B_\perp) = ρ_{\rm{B}}\exp(αB_\perp^2)$. The prefactor $ρ_{\rm{B}}$ decreases exponentially with increasing electron density but saturates…
▽ More
We report an universal behaviour of hopping transport in strongly interacting mesoscopic two-dimensional electron systems (2DES). In a certain window of background disorder, the resistivity at low perpendicular magnetic fields follows the expected relation $ρ(B_\perp) = ρ_{\rm{B}}\exp(αB_\perp^2)$. The prefactor $ρ_{\rm{B}}$ decreases exponentially with increasing electron density but saturates to a finite value at higher densities. Strikingly, this value is found to be universal when expressed in terms of absolute resistance and and shows quantisation at $R_{\rm{B}}\approx h/e^2$ and $R_{\rm{B}}\approx 1/2$ $ h/e^2$. We suggest a strongly correlated electronic phase as a possible explanation.
△ Less
Submitted 27 July, 2007; v1 submitted 24 July, 2007;
originally announced July 2007.