-
An SNSPD-based detector system for NASA's Deep Space Optical Communications project
Authors:
Emma E. Wollman,
Jason P. Allmaras,
Andrew D. Beyer,
Boris Korzh,
Marcus C. Runyan,
Lautaro Narváez,
William H. Farr,
Francesco Marsili,
Ryan M. Briggs,
Gregory J. Miles,
Matthew D. Shaw
Abstract:
We report on a free-space-coupled superconducting nanowire single-photon detector array developed for NASA's Deep Space Optical Communications project (DSOC). The array serves as the downlink detector for DSOC's primary ground receiver terminal located at Palomar Observatory's 200-inch Hale Telescope. The 64-pixel WSi array comprises four quadrants of 16 co-wound pixels covering a 320 micron diame…
▽ More
We report on a free-space-coupled superconducting nanowire single-photon detector array developed for NASA's Deep Space Optical Communications project (DSOC). The array serves as the downlink detector for DSOC's primary ground receiver terminal located at Palomar Observatory's 200-inch Hale Telescope. The 64-pixel WSi array comprises four quadrants of 16 co-wound pixels covering a 320 micron diameter active area and embedded in an optical stack. The detector system also includes cryogenic optics for filtering and focusing the downlink signal and electronics for biasing the array and amplifying the output pulses. The detector system exhibits a peak system detection efficiency of 76% at 1550 nm, a background-limited false count rate as low as 3.7 kcps across the array, timing jitter less than 120 ps FWHM, and a maximum count rate of ~ 1 Gcps.
△ Less
Submitted 3 September, 2024;
originally announced September 2024.
-
Improvements of readout signal integrity in mid-infrared superconducting nanowire single photon detectors
Authors:
Sahil R. Patel,
Marco Colangelo,
Andrew D. Beyer,
Gregor G. Taylor,
Jason P. Allmaras,
Emma E. Wollman,
Matthew D. Shaw,
Karl K. Berggren,
Boris Korzh
Abstract:
Superconducting nanowire single-photon detectors (SNSPDs) with high timing resolution and low background counts in the mid infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR…
▽ More
Superconducting nanowire single-photon detectors (SNSPDs) with high timing resolution and low background counts in the mid infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR) of the readout signal as the critical currents become increasingly smaller. We overcome this trade-off with a new device architecture that employs impedance matching tapers and superconducting nanowire avalanche photodetectors to demonstrate increased SNR while maintaining saturated internal detection efficiency at 7.4 μm and getting close to saturation at 10.6 μm. This work provides a novel platform for pushing SNSPD sensitivity to longer wavelengths while improving the scalability of the readout electronics.
△ Less
Submitted 28 January, 2024;
originally announced January 2024.
-
Low-noise single-photon counting superconducting nanowire detectors at infrared wavelengths up to 29 $μ$m
Authors:
Gregor G. Taylor,
Alexander B. Walter,
Boris Korzh,
Bruce Bumble,
Sahil R. Patel,
Jason P. Allmaras,
Andrew D. Beyer,
Roger O'Brient,
Matthew D. Shaw,
Emma E. Wollman
Abstract:
We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 $μ$m. This represents the first demonstration of a time correlated single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 $μ$m, whilst maintaining dark count rates below 0.1 counts per second.…
▽ More
We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 $μ$m. This represents the first demonstration of a time correlated single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 $μ$m, whilst maintaining dark count rates below 0.1 counts per second. Extension of superconducting nanowire single-photon detectors to this spectral range provides low noise and high timing resolution photon counting detection, effectively providing a new class of single-photon sensitive detector for these wavelengths. These detectors are important for applications such as exoplanet spectroscopy, infrared astrophysics, physical chemistry, remote sensing and direct dark-matter detection.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
A superconducting-nanowire single-photon camera with 400,000 pixels
Authors:
Bakhrom G. Oripov,
Dana S. Rampini,
Jason Allmaras,
Matthew D. Shaw,
Sae Woo Nam,
Boris Korzh,
Adam N. McCaughan
Abstract:
For the last 50 years, superconducting detectors have offered exceptional sensitivity and speed for detecting faint electromagnetic signals in a wide range of applications. These detectors operate at very low temperatures and generate a minimum of excess noise, making them ideal for testing the non-local nature of reality, investigating dark matter, mapping the early universe, and performing quant…
▽ More
For the last 50 years, superconducting detectors have offered exceptional sensitivity and speed for detecting faint electromagnetic signals in a wide range of applications. These detectors operate at very low temperatures and generate a minimum of excess noise, making them ideal for testing the non-local nature of reality, investigating dark matter, mapping the early universe, and performing quantum computation and communication. Despite their appealing properties, however, there are currently no large-scale superconducting cameras - even the largest demonstrations have never exceeded 20 thousand pixels. This is especially true for one of the most promising detector technologies, the superconducting nanowire single-photon detector (SNSPD). These detectors have been demonstrated with system detection efficiencies of 98.0%, sub-3-ps timing jitter, sensitivity from the ultraviolet (250nm) to the mid-infrared (10um), and dark count rates below 6.2e-6 counts per second (cps), but despite more than two decades of development they have never achieved an array size larger than a kilopixel. Here, we report on the implementation and characterization of a 400,000 pixel SNSPD camera, a factor of 400 improvement over the previous state-of-the-art. The array spanned an area 4x2.5 mm with a 5x5um resolution, reached unity quantum efficiency at wavelengths of 370 nm and 635 nm, counted at a rate of 1.1e5 cps, and had a dark count rate of 1e-4 cps per detector (corresponding to 0.13 cps over the whole array). The imaging area contains no ancillary circuitry and the architecture is scalable well beyond the current demonstration, paving the way for large-format superconducting cameras with 100% fill factors and near-unity detection efficiencies across a vast range of the electromagnetic spectrum.
△ Less
Submitted 15 June, 2023;
originally announced June 2023.
-
Large active-area superconducting microwire detector array with single-photon sensitivity in the near-infrared
Authors:
Jamie S. Luskin,
Ekkehart Schmidt,
Boris Korzh,
Andrew D. Beyer,
Bruce Bumble,
Jason P. Allmaras,
Alexander B. Walter,
Emma E. Wollman,
Lautaro Narváez,
Varun B. Verma,
Sae Woo Nam,
Ilya Charaev,
Marco Colangelo,
Karl K. Berggren,
Cristián Peña,
Maria Spiropulu,
Maurice Garcia-Sciveres,
Stephen Derenzo,
Matthew D. Shaw
Abstract:
Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experime…
▽ More
Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experiments. We present 8-pixel $1 mm^2$ superconducting microwire single photon detectors (SMSPDs) with $1\,\mathrm{μm}$-wide wires fabricated from WSi and MoSi films of various stoichiometries using electron-beam and optical lithography. Devices made from all materials and fabrication techniques show saturated internal detection efficiency at 1064 nm in at least one pixel, and the best performing device made from silicon-rich WSi shows single-photon sensitivity in all 8 pixels and saturated internal detection efficiency in 6/8 pixels. This detector is the largest reported active-area SMSPD or SNSPD with near-IR sensitivity published to date, and the first report of an SMSPD array. By further optimizing the photolithography techniques presented in this work, a viable pathway exists to realize larger devices with $cm^2$-scale active area and beyond.
△ Less
Submitted 19 March, 2023;
originally announced March 2023.
-
High-speed detection of 1550 nm single photons with superconducting nanowire detectors
Authors:
Ioana Craiciu,
Boris Korzh,
Andrew D. Beyer,
Andrew Mueller,
Jason P. Allmaras,
Lautaro Narváez,
Maria Spiropulu,
Bruce Bumble,
Thomas Lehner,
Emma E. Wollman,
Matthew D. Shaw
Abstract:
Superconducting nanowire single photon detectors are a key technology for quantum information and science due to their high efficiency, low timing jitter, and low dark counts. In this work, we present a detector for single 1550 nm photons with up to 78% detection efficiency, timing jitter below 50 ps FWHM, 158 counts/s dark count rate - as well as a world-leading maximum count rate of 1.5 giga-cou…
▽ More
Superconducting nanowire single photon detectors are a key technology for quantum information and science due to their high efficiency, low timing jitter, and low dark counts. In this work, we present a detector for single 1550 nm photons with up to 78% detection efficiency, timing jitter below 50 ps FWHM, 158 counts/s dark count rate - as well as a world-leading maximum count rate of 1.5 giga-counts/s at 3 dB compression. The PEACOQ detector (Performance-Enhanced Array for Counting Optical Quanta) comprises a linear array of 32 straight superconducting niobium nitride nanowires which span the mode of an optical fiber. This design supports high count rates with minimal penalties for detection efficiency and timing jitter. We show how these trade-offs can be mitigated by implementing independent read-out for each nanowire and by using a temporal walk correction technique to reduce count-rate dependent timing jitter. These detectors make quantum communication practical on a 10 GHz clock.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Picosecond Synchronization of Photon Pairs through a Fiber Link between Fermilab and Argonne National Laboratories
Authors:
Keshav Kapoor,
Si Xie,
Joaquin Chung,
Raju Valivarthi,
Cristián Peña,
Lautaro Narváez,
Neil Sinclair,
Jason P. Allmaras,
Andrew D. Beyer,
Samantha I. Davis,
Gabriel Fabre,
George Iskander,
Gregory S. Kanter,
Rajkumar Kettimuthu,
Boris Korzh,
Prem Kumar,
Nikolai Lauk,
Andrew Mueller,
Matthew Shaw,
Panagiotis Spentzouris,
Maria Spiropulu,
Jordan M. Thomas,
Emma E. Wollman
Abstract:
We demonstrate a three-node quantum network for C-band photon pairs using 2 pairs of 59 km of deployed fiber between Fermi and Argonne National Laboratories. The C-band pairs are directed to nodes using a standard telecommunication switch and synchronized to picosecond-scale timing resolution using a coexisting O- or L-band optical clock distribution system. We measure a reduction of coincidence-t…
▽ More
We demonstrate a three-node quantum network for C-band photon pairs using 2 pairs of 59 km of deployed fiber between Fermi and Argonne National Laboratories. The C-band pairs are directed to nodes using a standard telecommunication switch and synchronized to picosecond-scale timing resolution using a coexisting O- or L-band optical clock distribution system. We measure a reduction of coincidence-to-accidental ratio (CAR) of the C-band pairs from 51 $\pm$ 2 to 5.3 $\pm$ 0.4 due to Raman scattering of the O-band clock pulses. Despite this reduction, the CAR is nevertheless suitable for quantum networks.
△ Less
Submitted 2 August, 2022;
originally announced August 2022.
-
Picosecond synchronization system for quantum networks
Authors:
Raju Valivarthi,
Lautaro Narváez,
Samantha I. Davis,
Nikolai Lauk,
Cristián Peña,
Si Xie,
Jason P. Allmaras,
Andrew D. Beyer,
Boris Korzh,
Andrew Mueller,
Mandy Rominsky,
Matthew Shaw,
Emma E. Wollman,
Panagiotis Spentzouris,
Daniel Oblak,
Neil Sinclair,
Maria Spiropulu
Abstract:
The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system…
▽ More
The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system with ps-scale timing resolution. Synchronization of the photons is achieved by distributing O-band-wavelength laser pulses between network nodes. Specifically, we distribute photon pairs between three nodes, and measure a reduction of coincidence-to-accidental ratio from 77 to only 42 when the synchronization system is enabled, which permits high-fidelity qubit transmission. Our demonstration sheds light on the role of noise in quantum communication and represents a key step in realizing deployed co-existing classical-quantum networks.
△ Less
Submitted 6 March, 2022;
originally announced March 2022.
-
The thermally-coupled imager: A scalable readout architecture for superconducting nanowire single photon detectors
Authors:
Adam N. McCaughan,
Yao Zhai,
Boris Korzh,
Jason P. Allmaras,
Bakhrom G. Oripov,
Matthew D. Shaw,
Sae Woo Nam
Abstract:
Although superconducting nanowire single-photon detectors (SNSPDs) are a promising technology for quantum optics, metrology, and astronomy, they currently lack a readout architecture that is scalable to the megapixel regime and beyond. In this work, we have designed and demonstrated such an architecture for SNSPDs, called the thermally-coupled imager (TCI). The TCI uses a combination of time-of-fl…
▽ More
Although superconducting nanowire single-photon detectors (SNSPDs) are a promising technology for quantum optics, metrology, and astronomy, they currently lack a readout architecture that is scalable to the megapixel regime and beyond. In this work, we have designed and demonstrated such an architecture for SNSPDs, called the thermally-coupled imager (TCI). The TCI uses a combination of time-of-flight delay lines and thermal coupling to create a scalable architecture that can scale to large array sizes, allows neighboring detectors to operate independently, and requires only four microwave readout lines to operate no matter the size of the array. We give an overview of how the architecture functions, and demonstrate a proof-of-concept $32\times32$ imaging array. The array was able to image a free-space focused spot at 373 nm, count at 9.6 Mcps, and resolve photon location with greater than 99.83\% distinguishability.
△ Less
Submitted 9 December, 2021;
originally announced December 2021.
-
Impedance-matched differential superconducting nanowire detectors
Authors:
Marco Colangelo,
Boris Korzh,
Jason P. Allmaras,
Andrew D. Beyer,
Andrew S. Mueller,
Ryan M. Briggs,
Bruce Bumble,
Marcus Runyan,
Martin J. Stevens,
Adam N. McCaughan,
Di Zhu,
Stephen Smith,
Wolfgang Becker,
Lautaro Narváez,
Joshua C. Bienfang,
Simone Frasca,
Angel E. Velasco,
Cristián H. Peña,
Edward E. Ramirez,
Alexander B. Walter,
Ekkehart Schmidt,
Emma E. Wollman,
Maria Spiropulu,
Richard Mirin,
Sae Woo Nam
, et al. (2 additional authors not shown)
Abstract:
Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a h…
▽ More
Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a high system detection efficiency and a low detector jitter, simultaneously. To make our differential detectors compatible with single-ended time taggers, we also engineer analog differential-to-single-ended readout electronics, with minimal impact on the system timing resolution. Our niobium nitride differential SNSPDs achieve $47.3\,\% \pm 2.4\,\%$ system detection efficiency and sub-$10\,\mathrm{ps}$ system jitter at $775\,\mathrm{nm}$, while at $1550\,\mathrm{nm}$ they achieve $71.1\,\% \pm 3.7\,\%$ system detection efficiency and $13.1\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ system jitter. These detectors also achieve sub-100 ps timing response at one one-hundredth maximum level, $30.7\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $775\,\mathrm{nm}$ and $47.6\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $1550\,\mathrm{nm}$, enabling time-correlated single-photon counting with high dynamic range response functions. Furthermore, thanks to the differential impedance-matched design, our detectors exhibit delay-line imaging capabilities and photon-number resolution. The properties and high-performance metrics achieved by our system make it a versatile photon-detection solution for many scientific applications.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
Self-Heating Hotspots in Superconducting Nanowires Cooled by Phonon Black-Body Radiation
Authors:
Andrew Dane,
Jason Allmaras,
Di Zhu,
Murat Onen,
Marco Colangelo,
Reza Bahgdadi,
Jean-Luc Tambasco,
Yukimi Morimoto,
Ignacio Estay Forno,
Ilya Charaev,
Qingyuan Zhao,
Mikhail Skvortsov,
Alexander Kozorezov,
Karl Berggren
Abstract:
Controlling thermal transport is important for a range of devices and technologies, from phase change memories to next-generation electronics. This is especially true in nano-scale devices where thermal transport is altered by the influence of surfaces and changes in dimensionality. In superconducting nanowire single-photon detectors, the thermal boundary conductance (TBC) between the nanowire and…
▽ More
Controlling thermal transport is important for a range of devices and technologies, from phase change memories to next-generation electronics. This is especially true in nano-scale devices where thermal transport is altered by the influence of surfaces and changes in dimensionality. In superconducting nanowire single-photon detectors, the thermal boundary conductance (TBC) between the nanowire and the substrate it is fabricated on influences most of the performance metrics that make these detectors attractive for applications. This includes the maximum count rate, latency, jitter, and quantum efficiency. Despite its importance, the study of TBC in superconducting nanowire devices has not been done systematically, primarily due to the lack of a straightforward characterization method. Here, we show that simple electrical measurements can be used to estimate the TBC between nanowires and substrates and that these measurements match acoustic mismatch theory across a variety of substrates. Numerical simulations allow us to refine our understanding, however, open questions remain. This work should enable thermal engineering in superconducting nanowire electronics and cryogenic detectors for improved device performance.
△ Less
Submitted 9 April, 2021;
originally announced April 2021.
-
Single-photon detection in the mid-infrared up to 10 micron wavelength using tungsten silicide superconducting nanowire detectors
Authors:
V. B. Verma,
B. Korzh,
A. B. Walter,
A. E. Lita,
R. M. Briggs,
M. Colangelo,
Y. Zhai,
E. E. Wollman,
A. D. Beyer,
J. P. Allmaras,
B. Bumble,
H. Vora,
D. Zhu,
E. Schmidt,
K. K. Berggren,
R. P. Mirin,
S. W. Nam,
M. D. Shaw
Abstract:
We developed superconducting nanowire single-photon detectors (SNSPDs) based on tungsten silicide (WSi) that show saturated internal detection efficiency up to a wavelength of 10 um. These detectors are promising for applications in the mid-infrared requiring ultra-high gain stability, low dark counts, and high efficiency such as chemical sensing, LIDAR, dark matter searches and exoplanet spectros…
▽ More
We developed superconducting nanowire single-photon detectors (SNSPDs) based on tungsten silicide (WSi) that show saturated internal detection efficiency up to a wavelength of 10 um. These detectors are promising for applications in the mid-infrared requiring ultra-high gain stability, low dark counts, and high efficiency such as chemical sensing, LIDAR, dark matter searches and exoplanet spectroscopy.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Teleportation Systems Towards a Quantum Internet
Authors:
Raju Valivarthi,
Samantha Davis,
Cristian Pena,
Si Xie,
Nikolai Lauk,
Lautaro Narvaez,
Jason P. Allmaras,
Andrew D. Beyer,
Yewon Gim,
Meraj Hussein,
George Iskander,
Hyunseong Linus Kim,
Boris Korzh,
Andrew Mueller,
Mandy Rominsky,
Matthew Shaw,
Dawn Tang,
Emma E. Wollman,
Christoph Simon,
Panagiotis Spentzouris,
Neil Sinclair,
Daniel Oblak,
Maria Spiropulu
Abstract:
Quantum teleportation is essential for many quantum information technologies including long-distance quantum networks. Using fiber-coupled devices, including state-of-the-art low-noise superconducting nanowire single photon detectors and off-the-shelf optics, we achieve quantum teleportation of time-bin qubits at the telecommunication wavelength of 1536.5 nm. We measure teleportation fidelities of…
▽ More
Quantum teleportation is essential for many quantum information technologies including long-distance quantum networks. Using fiber-coupled devices, including state-of-the-art low-noise superconducting nanowire single photon detectors and off-the-shelf optics, we achieve quantum teleportation of time-bin qubits at the telecommunication wavelength of 1536.5 nm. We measure teleportation fidelities of >=90% that are consistent with an analytical model of our system, which includes realistic imperfections. To demonstrate the compatibility of our setup with deployed quantum networks, we teleport qubits over 22 km of single-mode fiber while transmitting qubits over an additional 22 km of fiber. Our systems, which are compatible with emerging solid-state quantum devices, provide a realistic foundation for a high-fidelity quantum internet with practical devices.
△ Less
Submitted 28 July, 2020; v1 submitted 21 July, 2020;
originally announced July 2020.
-
Superconducting microwire detectors with single-photon sensitivity in the near-infrared
Authors:
Jeff Chiles,
Sonia M. Buckley,
Adriana Lita,
Varun B. Verma,
Jason Allmaras,
Boris Korzh,
Matthew D. Shaw,
Jeffrey M. Shainline,
Richard P. Mirin,
Sae Woo Nam
Abstract:
We report on the fabrication and characterization of single-photon-sensitive WSi superconducting detectors with wire widths from 1 μm to 3 μm. The devices achieve saturated internal detection efficiency at 1.55 μm wavelength and exhibit maximum count rates in excess of 10^5 s^-1. We also investigate the material properties of the silicon-rich WSi films used for these devices. We find that many dev…
▽ More
We report on the fabrication and characterization of single-photon-sensitive WSi superconducting detectors with wire widths from 1 μm to 3 μm. The devices achieve saturated internal detection efficiency at 1.55 μm wavelength and exhibit maximum count rates in excess of 10^5 s^-1. We also investigate the material properties of the silicon-rich WSi films used for these devices. We find that many devices with active lengths of several hundred microns exhibit critical currents in excess of 50% of the depairing current. A meandered detector with 2.0 μm wire width is demonstrated over a surface area of 362x362 μm^2, showcasing the material and device quality achieved.
△ Less
Submitted 28 February, 2020;
originally announced February 2020.
-
Demonstration of a Thermally-Coupled Row-Column SNSPD Imaging Array
Authors:
Jason P. Allmaras,
Emma E. Wollman,
Andrew D. Beyer,
Ryan M. Briggs,
Boris A. Korzh,
Bruce Bumble,
Matthew D. Shaw
Abstract:
While single-pixel superconducting nanowire single photon detectors (SNSPDs) have demonstrated remarkable efficiency and timing performance from the UV to near-IR, scaling these devices to large imaging arrays remains challenging. Here, we propose a new SNSPD multiplexing system using thermal coupling and detection correlations between two photosensitive layers of an array. Using this architecture…
▽ More
While single-pixel superconducting nanowire single photon detectors (SNSPDs) have demonstrated remarkable efficiency and timing performance from the UV to near-IR, scaling these devices to large imaging arrays remains challenging. Here, we propose a new SNSPD multiplexing system using thermal coupling and detection correlations between two photosensitive layers of an array. Using this architecture with the channels of one layer oriented in rows and the second layer in columns, we demonstrate imaging capability in 16-pixel arrays with accurate spot tracking at the few photon level. We also explore the performance tradeoffs of orienting the top layer nanowires parallel and perpendicular to the bottom layer. The thermally-coupled row-column scheme is readily able to scale to the kilopixel size with existing readout systems, and when combined with other multiplexing architectures, has the potential to enable megapixel scale SNSPD imaging arrays.
△ Less
Submitted 24 February, 2020;
originally announced February 2020.
-
Determining the depairing current in superconducting nanowire single-photon detectors
Authors:
S. Frasca,
B. Korzh,
M. Colangelo,
D. Zhu,
A. E. Lita,
J. P. Allmaras,
E. E. Wollman,
V. B. Verma,
A. E. Dane,
E. Ramirez,
A. D. Beyer,
S. W. Nam,
A. G. Kozorezov,
M. D. Shaw,
K. K. Berggren
Abstract:
We estimate the depairing current of superconducting nanowire single photon detectors (SNSPDs) by studying the dependence of the nanowires kinetic inductance on their bias current. The kinetic inductance is determined by measuring the resonance frequency of resonator style nanowire coplanar waveguides both in transmission and reflection configurations. Bias current dependent shifts in the measured…
▽ More
We estimate the depairing current of superconducting nanowire single photon detectors (SNSPDs) by studying the dependence of the nanowires kinetic inductance on their bias current. The kinetic inductance is determined by measuring the resonance frequency of resonator style nanowire coplanar waveguides both in transmission and reflection configurations. Bias current dependent shifts in the measured resonant frequency correspond to the change in the kinetic inductance, which can be compared with theoretical predictions. We demonstrate that the fast relaxation model described in the literature accurately matches our experimental data and provides a valuable tool for direct determination of the depairing current. Accurate and direct measurement of the depairing current is critical for nanowire quality analysis, as well as modeling efforts aimed at understanding the detection mechanism in SNSPDs.
△ Less
Submitted 18 April, 2019;
originally announced April 2019.
-
An ultrahigh-impedance superconducting thermal switch for interfacing superconductors to semiconductors and optoelectronics
Authors:
A. N. McCaughan,
V. B. Verma,
S. Buckley,
J. P. Allmaras,
A. G. Kozorezov,
A. N. Tait,
S. W. Nam,
J. M. Shainline
Abstract:
A number of current approaches to quantum and neuromorphic computing use superconductors as the basis of their platform or as a measurement component, and will need to operate at cryogenic temperatures. Semiconductor systems are typically proposed as a top-level control in these architectures, with low-temperature passive components and intermediary superconducting electronics acting as the direct…
▽ More
A number of current approaches to quantum and neuromorphic computing use superconductors as the basis of their platform or as a measurement component, and will need to operate at cryogenic temperatures. Semiconductor systems are typically proposed as a top-level control in these architectures, with low-temperature passive components and intermediary superconducting electronics acting as the direct interface to the lowest-temperature stages. The architectures, therefore, require a low-power superconductor-semiconductor interface, which is not currently available. Here we report a superconducting switch that is capable of translating low-voltage superconducting inputs directly into semiconductor-compatible (above 1,000 mV) outputs at kelvin-scale temperatures (1 K or 4 K). To illustrate the capabilities in interfacing superconductors and semiconductors, we use it to drive a light-emitting diode (LED) in a photonic integrated circuit, generating photons at 1 K from a low-voltage input and detecting them with an on-chip superconducting single-photon detector. We also characterize our device's timing response (less than 300 ps turn-on, 15 ns turn-off), output impedance (greater than 1 MΩ), and energy requirements (0.18 fJ/um^2, 3.24 mV/nW).
△ Less
Submitted 30 September, 2019; v1 submitted 25 March, 2019;
originally announced March 2019.
-
Superconducting nanowire single-photon detector with integrated impedance-matching taper
Authors:
Di Zhu,
Marco Colangelo,
Boris A. Korzh,
Qing-Yuan Zhao,
Simone Frasca,
Andrew E. Dane,
Angel E. Velasco,
Andrew D. Beyer,
Jason P. Allmaras,
Edward Ramirez,
William J. Strickland,
Daniel F. Santavicca,
Matthew D. Shaw,
Karl K. Berggren
Abstract:
Conventional readout of a superconducting nanowire single-photon detector (SNSPD) sets an upper bound on the output voltage to be the product of the bias current and the load impedance, $I_\mathrm{B}\times Z_\mathrm{load}$, where $Z_\mathrm{load}$ is limited to 50 $Ω$ in standard r.f. electronics. Here, we break this limit by interfacing the 50 $Ω$ load and the SNSPD using an integrated supercondu…
▽ More
Conventional readout of a superconducting nanowire single-photon detector (SNSPD) sets an upper bound on the output voltage to be the product of the bias current and the load impedance, $I_\mathrm{B}\times Z_\mathrm{load}$, where $Z_\mathrm{load}$ is limited to 50 $Ω$ in standard r.f. electronics. Here, we break this limit by interfacing the 50 $Ω$ load and the SNSPD using an integrated superconducting transmission line taper. The taper is a transformer that effectively loads the SNSPD with high impedance without latching. It increases the amplitude of the detector output while preserving the fast rising edge. Using a taper with a starting width of 500 nm, we experimentally observed a 3.6$\times$ higher pulse amplitude, 3.7$\times$ faster slew rate, and 25.1 ps smaller timing jitter. The results match our numerical simulation, which incorporates both the hotspot dynamics in the SNSPD and the distributed nature in the transmission line taper. The taper studied here may become a useful tool to interface high-impedance superconducting nanowire devices to conventional low-impedance circuits.
△ Less
Submitted 9 November, 2018;
originally announced November 2018.
-
Intrinsic timing jitter and latency in superconducting single photon nanowire detectors
Authors:
Jason P. Allmaras,
Alexander G. Kozorezov,
Boris A. Korzh,
Karl K. Berggren,
Matthew D. Shaw
Abstract:
We analyze the origin of the intrinsic timing jitter in superconducting nanowire single photon detectors (SNSPDs) in terms of fluctuations in the latency of the detector response, which is determined by the microscopic physics of the photon detection process. We demonstrate that fluctuations in the physical parameters which determine the latency give rise to the intrinsic timing jitter. We develop…
▽ More
We analyze the origin of the intrinsic timing jitter in superconducting nanowire single photon detectors (SNSPDs) in terms of fluctuations in the latency of the detector response, which is determined by the microscopic physics of the photon detection process. We demonstrate that fluctuations in the physical parameters which determine the latency give rise to the intrinsic timing jitter. We develop a general description of latency by introducing the explicit time dependence of the internal detection efficiency. By considering the dynamic Fano fluctuations together with static spatial inhomogeneities, we study the details of the connection between latency and timing jitter. We develop both a simple phenomenological model and a more general microscopic model of detector latency and timing jitter based on the solution of the generalized time-dependent Ginzburg-Landau equations for the 1D hotbelt geometry. While the analytical model is sufficient for qualitative interpretation of recent data, the general approach establishes the framework for a quantitative analysis of detector latency and the fundamental limits of intrinsic timing jitter. These theoretical advances can be used to interpret the results of recent experiments measuring the dependence of detection latency and timing jitter on photon energy to the few-picosecond level.
△ Less
Submitted 2 August, 2018; v1 submitted 30 April, 2018;
originally announced May 2018.
-
Demonstrating sub-3 ps temporal resolution in a superconducting nanowire single-photon detector
Authors:
B. A. Korzh,
Q-Y. Zhao,
S. Frasca,
J. P. Allmaras,
T. M. Autry,
E. A. Bersin,
M. Colangelo,
G. M. Crouch,
A. E. Dane,
T. Gerrits,
F. Marsili,
G. Moody,
E. Ramirez,
J. D. Rezac,
M. J. Stevens,
E. E. Wollman,
D. Zhu,
P. D. Hale,
K. L. Silverman,
R. P. Mirin,
S. W. Nam,
M. D. Shaw,
K. K. Berggren
Abstract:
Improving the temporal resolution of single photon detectors has an impact on many applications, such as increased data rates and transmission distances for both classical and quantum optical communication systems, higher spatial resolution in laser ranging and observation of shorter-lived fluorophores in biomedical imaging. In recent years, superconducting nanowire single-photon detectors (SNSPDs…
▽ More
Improving the temporal resolution of single photon detectors has an impact on many applications, such as increased data rates and transmission distances for both classical and quantum optical communication systems, higher spatial resolution in laser ranging and observation of shorter-lived fluorophores in biomedical imaging. In recent years, superconducting nanowire single-photon detectors (SNSPDs) have emerged as the highest efficiency time-resolving single-photon counting detectors available in the near infrared. As the detection mechanism in SNSPDs occurs on picosecond time scales, SNSPDs have been demonstrated with exquisite temporal resolution below 15 ps. We reduce this value to 2.7$\pm$0.2 ps at 400 nm and 4.6$\pm$0.2 ps at 1550 nm, using a specialized niobium nitride (NbN) SNSPD. The observed photon-energy dependence of the temporal resolution and detection latency suggests that intrinsic effects make a significant contribution.
△ Less
Submitted 18 April, 2018;
originally announced April 2018.
-
UV superconducting nanowire single-photon detectors with high efficiency, low noise, and 4 K operating temperature
Authors:
Emma E. Wollman,
Varun B. Verma,
Andrew D. Beyer,
Ryan M. Briggs,
Francesco Marsili,
Jason P. Allmaras,
Adriana E. Lita,
Richard P. Mirin,
Sae Woo Nam,
Matthew D. Shaw
Abstract:
For photon-counting applications at ultraviolet wavelengths, there are currently no detectors that combine high efficiency (> 50%), sub-nanosecond timing resolution, and sub-Hz dark count rates. Superconducting nanowire single-photon detectors (SNSPDs) have seen success over the past decade for photon-counting applications in the near-infrared, but little work has been done to optimize SNSPDs for…
▽ More
For photon-counting applications at ultraviolet wavelengths, there are currently no detectors that combine high efficiency (> 50%), sub-nanosecond timing resolution, and sub-Hz dark count rates. Superconducting nanowire single-photon detectors (SNSPDs) have seen success over the past decade for photon-counting applications in the near-infrared, but little work has been done to optimize SNSPDs for wavelengths below 400 nm. Here, we describe the design, fabrication, and characterization of UV SNSPDs operating at wavelengths between 250 and 370 nm. The detectors have active areas up to 56 $μ$m in diameter, 70 - 80% efficiency, timing resolution down to 60 ps FWHM, blindness to visible and infrared photons, and dark count rates of ~ 0.25 counts/hr for a 56 $μ$m diameter pixel. By using the amorphous superconductor MoSi, these UV SNSPDs are also able to operate at temperatures up to 4.2 K. These performance metrics make UV SNSPDs ideal for applications in trapped-ion quantum information processing, lidar studies of the upper atmosphere, UV fluorescent-lifetime imaging microscopy, and photon-starved UV astronomy.
△ Less
Submitted 11 August, 2017;
originally announced August 2017.
-
Fano fluctuations in superconducting nanowire single-photon detectors
Authors:
A. G. Kozorezov,
C. Lambert,
F. Marsili,
M. J. Stevens,
V. B. Verma,
J. P. Allmaras,
M. D. Shaw,
R. P. Mirin,
Sae Woo Nam
Abstract:
Because of their universal nature, Fano fluctuations are expected to influence the response of superconducting nanowire single-photon detectors (SNSPDs). We predict that photon counting rate ($PCR$) as a function of bias current ($I_B$) in SNSPDs is described by an integral over a transverse coordinate-dependent complementary error function. The latter describes smearing of local responses due to…
▽ More
Because of their universal nature, Fano fluctuations are expected to influence the response of superconducting nanowire single-photon detectors (SNSPDs). We predict that photon counting rate ($PCR$) as a function of bias current ($I_B$) in SNSPDs is described by an integral over a transverse coordinate-dependent complementary error function. The latter describes smearing of local responses due to Fano fluctuations of the amount of energy deposited into electronic system. The finite width, $σ$, of the $PCR$ vs $I_B$ arises from fluctuations in the energy partition between quasiparticles and phonons during the energy down-conversion cascade. In narrow-nanowire SNSPDs the local responses are uniform, and the effect of Fano-fluctuations on $σ$ is dominant. In wide-nanowire SNSPDs with strong coordinate dependence of local responses due to vortex-antivortex unbinding and vortex entry from edges, Fano-fluctuations smear singularities imprinted by vorticity on the transition part of $PCR$ curve. We demonstrate good agreement between theory and experiments for a series of bath temperatures and photon energies in narrow-wire WSi SNSPDs. The time-resolved hotspot relaxation curves predicted by Fano fluctuations match the Lorentzian shapes observed in experiments over the whole range of bias currents investigated except for their tails.
△ Less
Submitted 9 February, 2017;
originally announced February 2017.