Showing 1–9 of 9 results for author: Akhavan, S

CUR for Implicit Time Integration of Random Partial Differential Equations on Low-Rank Matrix Manifolds

Authors: Mohammad Hossein Naderi, Sara Akhavan, Hessam Babaee

Abstract: Dynamical low-rank approximation allows for solving large-scale matrix differential equations (MDEs) with significantly fewer degrees of freedom and has been applied to a growing number of applications. However, most existing techniques rely on explicit time integration schemes. In this work, we introduce a cost-effective Newton's method for the implicit time integration of stiff, nonlinear MDEs o… ▽ More Dynamical low-rank approximation allows for solving large-scale matrix differential equations (MDEs) with significantly fewer degrees of freedom and has been applied to a growing number of applications. However, most existing techniques rely on explicit time integration schemes. In this work, we introduce a cost-effective Newton's method for the implicit time integration of stiff, nonlinear MDEs on low-rank matrix manifolds. Our methodology is focused on MDEs resulting from the discretization of random partial differential equations (PDEs). Cost-effectiveness is achieved by solving the MDE at the minimum number of entries required for a rank-$r$ approximation. We present a novel CUR low-rank approximation that requires solving the parametric PDE at $r$ strategically selected parameters and $\mathcal{O}(r)$ grid points using Newton's method. The selected random samples and grid points adaptively vary over time and are chosen using the discrete empirical interpolation method or similar techniques. The proposed methodology is developed for high-order implicit multistep and Runge-Kutta schemes and incorporates rank adaptivity, allowing for dynamic rank adjustment over time to control error. Several analytical and PDE examples, including the stochastic Burgers' and Gray-Scott equations, demonstrate the accuracy and efficiency of the presented methodology. △ Less

Submitted 29 August, 2024; originally announced August 2024.

Sparsity Based Multi-Source Robust 3D Localization Using a Moving Receiver

Authors: Amir Mansourian, Alireza Fadakar, Saeed Akhavan

Abstract: Accurately localizing multiple sources is a critical task with various applications in wireless communications, such as emergency services including natural post-disaster search and rescue operations. However, the scenarios where the receiver is moving, are not addressed by recent studies. This paper tackles the angle of arrival (AOA) 3D-localization problem for multiple sparse signal sources with… ▽ More Accurately localizing multiple sources is a critical task with various applications in wireless communications, such as emergency services including natural post-disaster search and rescue operations. However, the scenarios where the receiver is moving, are not addressed by recent studies. This paper tackles the angle of arrival (AOA) 3D-localization problem for multiple sparse signal sources with a moving receiver having limited antennas, potentially outnumbered by the sources. First, an energy detector algorithm is proposed to exploit the sparsity of the signal to eliminate the noisy samples of the signals. Subsequently, elevation and azimuth AOAs of sources are roughly estimated using two dimensional multiple signal classification (2D-MUSIC) method. Next, an algorithm is proposed to refine and estimate the elevation and azimuth AOAs more accurately. To this end, we propose a sparse recovery algorithm to exploit the sparsity feature of the signals. Then, we propose a phase smoothing algorithm to refine the estimations in the output of sparse recovery algorithm. Finally, K-SVD algorithm is employed to find the accurate elevation and azimuth AOAs of sources. For localization, a new multi-source 3D-localization algorithm is proposed to estimate the positions of sources in a sequence of time windows. Extensive simulations are carried out to demonstrate the effectiveness of the proposed framework. △ Less

Submitted 12 August, 2024; originally announced August 2024.

SUM: Saliency Unification through Mamba for Visual Attention Modeling

Authors: Alireza Hosseini, Amirhossein Kazerouni, Saeed Akhavan, Michael Brudno, Babak Taati

Abstract: Visual attention modeling, important for interpreting and prioritizing visual stimuli, plays a significant role in applications such as marketing, multimedia, and robotics. Traditional saliency prediction models, especially those based on Convolutional Neural Networks (CNNs) or Transformers, achieve notable success by leveraging large-scale annotated datasets. However, the current state-of-the-art… ▽ More Visual attention modeling, important for interpreting and prioritizing visual stimuli, plays a significant role in applications such as marketing, multimedia, and robotics. Traditional saliency prediction models, especially those based on Convolutional Neural Networks (CNNs) or Transformers, achieve notable success by leveraging large-scale annotated datasets. However, the current state-of-the-art (SOTA) models that use Transformers are computationally expensive. Additionally, separate models are often required for each image type, lacking a unified approach. In this paper, we propose Saliency Unification through Mamba (SUM), a novel approach that integrates the efficient long-range dependency modeling of Mamba with U-Net to provide a unified model for diverse image types. Using a novel Conditional Visual State Space (C-VSS) block, SUM dynamically adapts to various image types, including natural scenes, web pages, and commercial imagery, ensuring universal applicability across different data types. Our comprehensive evaluations across five benchmarks demonstrate that SUM seamlessly adapts to different visual characteristics and consistently outperforms existing models. These results position SUM as a versatile and powerful tool for advancing visual attention modeling, offering a robust solution universally applicable across different types of visual content. △ Less

Submitted 9 September, 2024; v1 submitted 25 June, 2024; originally announced June 2024.

Comments: Accepted at IEEE/CVF WACV 2025

Spray-Coated Graphene/Quantum Dots Paper-Based Photodetectors

Authors: S. Malik, Y. Zhao, Y. He, X. Zhao, H. Li, L. G. Occhipinti, M. Wang, S. Akhavan

Abstract: Paper is an ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems. When combined with nanomaterials, it can be harnessed for various Internet-of-Things applications, ranging from wearable electronics to smart packaging. In this study, we present a non-vacuum spray deposition of arrays of hybrid single layer graphene (SLG)-CsPbBr3 perovskite q… ▽ More Paper is an ideal substrate for the development of flexible and environmentally sustainable ubiquitous electronic systems. When combined with nanomaterials, it can be harnessed for various Internet-of-Things applications, ranging from wearable electronics to smart packaging. In this study, we present a non-vacuum spray deposition of arrays of hybrid single layer graphene (SLG)-CsPbBr3 perovskite quantum dots (QDs) photodetectors on a paper substrate. This approach combines the advantages of two large-area techniques: chemical vapor deposition (CVD) and spray-coating. The first technique allows for the pre-deposition of CVD SLG, while the second enables the spray coating of a mask to pattern CVD SLG, electrode contacts, and photoactive QDs layers. The prepared paper-based photodetectors achieved an external responsivity of 520 A/W under 405 nm illumination at <1V operating voltage. By fabricating arrays of photodetectors on a paper substrate in the air, this work highlights the potential of this scalable approach for enabling ubiquitous electronics on paper. △ Less

Submitted 29 November, 2023; originally announced November 2023.

Graphene-perovskite fibre photodetectors

Authors: S. Akhavan, A. Taheri Najafabadi, S. Mignuzzi, M. Abdi Jalebi, A. Ruocco, I. Paradisanos, O. Balci, Z. Andaji-Garmaroudi, I. Goykhman, L. G. Occhipinti, E. Lidorikis, S. D. Stranks, A. C. Ferrari

Abstract: The integration of optoelectronic devices, such as transistors and photodetectors (PDs), into wearables and textiles is of great interest for applications such as healthcare and physiological monitoring. These require flexible/wearable systems adaptable to body motions, thus materials conformable to non-planar surfaces, and able to maintain performance under mechanical distortions. Here, we prepar… ▽ More The integration of optoelectronic devices, such as transistors and photodetectors (PDs), into wearables and textiles is of great interest for applications such as healthcare and physiological monitoring. These require flexible/wearable systems adaptable to body motions, thus materials conformable to non-planar surfaces, and able to maintain performance under mechanical distortions. Here, we prepare fibre PDs combining rolled graphene layers and photoactive perovskites. Conductive fibres ($\sim$500$Ω$/cm) are made by rolling single layer graphene (SLG) around silica fibres, followed by deposition of a dielectric layer (Al$_{2}$O$_{3}$ and parylene C), another rolled SLG as channel, and perovskite as photoactive component. The resulting gate-tunable PDs have response time$\sim$5ms, with an external responsivity$\sim$22kA/W at 488nm for 1V bias. The external responsivity is two orders of magnitude higher and the response time one order of magnitude faster than state-of-the-art wearable fibre based PDs. Under bending at 4mm radius, up to$\sim$80\% photocurrent is maintained. Washability tests show$\sim$72\% of initial photocurrent after 30 cycles, promising for wearable applications. △ Less

Submitted 19 November, 2023; originally announced November 2023.

A Critical Review of the Impact of Candidate Copy Number Variants on Autism Spectrum Disorders

Authors: Seyedeh Sedigheh Abedini, Shiva Akhavan, Julian Heng, Roohallah Alizadehsani, Iman Dehzangi, Denis C. Bauer, Hamid Rokny

Abstract: Autism spectrum disorder (ASD) is a heterogeneous neurodevelopmental disorder (NDD) that is caused by genetic, epigenetic, and environmental factors. Recent advances in genomic analysis have uncovered numerous candidate genes with common and/or rare mutations that increase susceptibility to ASD. In addition, there is increasing evidence that copy number variations (CNVs), single nucleotide polymor… ▽ More Autism spectrum disorder (ASD) is a heterogeneous neurodevelopmental disorder (NDD) that is caused by genetic, epigenetic, and environmental factors. Recent advances in genomic analysis have uncovered numerous candidate genes with common and/or rare mutations that increase susceptibility to ASD. In addition, there is increasing evidence that copy number variations (CNVs), single nucleotide polymorphisms (SNPs), and unusual de novo variants negatively affect neurodevelopment pathways in various ways. The overall rate of copy number variants found in patients with autism is 10%-20%, of which 3%-7% can be detected cytogenetically. Although the role of submicroscopic CNVs in ASD has been studied recently, their association with genomic loci and genes has not been properly studied. In this review, we focus on 47 ASD-associated CNV regions and their related genes. Here, we identify 1,632 protein-coding genes and long non-coding RNAs (lncRNAs) within these regions. Among them, 552 are significantly expressed in the brain. Using a list of ASD-associated genes from SFARI, we detect 17 regions containing at least one known ASD-associated protein-coding genes. Of the remaining 30 regions, we identify 24 regions containing at least one protein-coding genes with brain-enriched expression and nervous system phenotype in mouse mutant and one lncRNAs with both brain-enriched expression and upregulation in iPSC to neuron differentiation. Our analyses highlight the diversity of genetic lesions of CNV regions that contribute to ASD and provide new genetic evidence that lncRNA genes may contribute to etiology of ASD. In addition, the discovered CNVs will be a valuable resource for diagnostic facilities, therapeutic strategies, and research in terms of variation priority. △ Less

Submitted 6 March, 2023; v1 submitted 6 February, 2023; originally announced February 2023.

Non-equilibrium Band Broadening, Gap Renormalization and Band Inversion in Black Phosphorus

Authors: H. Hedayat, A. Ceraso, G. Soavi, S. Akhavan, A. Cadore, C. Dallera, G. Cerullo, A. C. Ferrari, E. Carpene

Abstract: Black phosphorous (BP) is a layered semiconductor with high carrier mobility, anisotropic optical response and wide bandgap tunability. In view of its application in optoelectronic devices, understanding transient photo-induced effects is crucial. Here, we investigate by time- and angle-resolved photoemission spectroscopy BP in its pristine state and in the presence of Stark splitting, chemically… ▽ More Black phosphorous (BP) is a layered semiconductor with high carrier mobility, anisotropic optical response and wide bandgap tunability. In view of its application in optoelectronic devices, understanding transient photo-induced effects is crucial. Here, we investigate by time- and angle-resolved photoemission spectroscopy BP in its pristine state and in the presence of Stark splitting, chemically induced by Cs ad-sorption. We show that photo-injected carriers trigger bandgap renormalization and a concurrent valence band attening caused by Pauli blocking. In the biased sample, photoexcitation leads to a long-lived (ns) surface photovoltage of few hundreds mV that counterbalances the Cs-induced surface band bending. This allows us to disentangle bulk from surface electronic states and to clarify the mechanism underlying the band inversion observed in bulk samples. △ Less

Submitted 19 July, 2020; originally announced July 2020.

Journal ref: 2D Materials 8, 025020 (2021)

Graphene-based Nanoscale Molecular Communication Receiver: Fabrication and Microfluidic Analysis

Authors: Murat Kuscu, Hamideh Ramezani, Ergin Dinc, Shahab Akhavan, Ozgur B. Akan

Abstract: Bio-inspired molecular communications (MC), where molecules are used to transfer information, is the most promising technique to realise the Internet of Nano Things (IoNT), thanks to its inherent biocompatibility, energy-efficiency, and reliability in physiologically-relevant environments. Despite a substantial body of theoretical work concerning MC, the lack of practical micro/nanoscale MC device… ▽ More Bio-inspired molecular communications (MC), where molecules are used to transfer information, is the most promising technique to realise the Internet of Nano Things (IoNT), thanks to its inherent biocompatibility, energy-efficiency, and reliability in physiologically-relevant environments. Despite a substantial body of theoretical work concerning MC, the lack of practical micro/nanoscale MC devices and MC testbeds has led researchers to make overly simplifying assumptions about the implications of the channel conditions and the physical architectures of the practical transceivers in developing theoretical models and devising communication methods for MC. On the other hand, MC imposes unique challenges resulting from the highly complex, nonlinear, time-varying channel properties that cannot be always tackled by conventional information and communication tools and technologies (ICT). As a result, the reliability of the existing MC methods, which are mostly adopted from electromagnetic communications and not validated with practical testbeds, is highly questionable. As the first step to remove this discrepancy, in this study, we report on the fabrication of a nanoscale MC receiver based on graphene field-effect transistor biosensors. We perform its ICT characterisation in a custom-designed microfluidic MC system with the information encoded into the concentration of single-stranded DNA molecules. This experimental platform is the first practical implementation of a micro/nanoscale MC system with nanoscale MC receivers, and can serve as a testbed for developing realistic MC methods and IoNT applications. △ Less

Submitted 4 July, 2020; v1 submitted 27 June, 2020; originally announced June 2020.

Comments: References fixed

Waveguide-integrated, plasmonic enhanced graphene photodetectors

Authors: J. E. Muench, A. Ruocco, M. A. Giambra, V. Miseikis, D. Zhang, J. Wang, H. F. Y. Watson, G. C. Park, S. Akhavan, V. Sorianello, M. Midrio, A. Tomadin, C. Coletti, M. Romagnoli, A. C. Ferrari, I. Goykhman

Abstract: We present a micrometer scale, on-chip integrated, plasmonic enhanced graphene photodetector (GPD) for telecom wavelengths operating at zero dark current. The GPD is designed and optimized to directly generate a photovoltage and has an external responsivity~12.2V/W with a 3dB bandwidth~42GHz. We utilize Au split-gates with a$\sim$100nm gap to electrostatically create a p-n-junction and simultaneou… ▽ More We present a micrometer scale, on-chip integrated, plasmonic enhanced graphene photodetector (GPD) for telecom wavelengths operating at zero dark current. The GPD is designed and optimized to directly generate a photovoltage and has an external responsivity~12.2V/W with a 3dB bandwidth~42GHz. We utilize Au split-gates with a$\sim$100nm gap to electrostatically create a p-n-junction and simultaneously guide a surface plasmon polariton gap-mode. This increases light-graphene interaction and optical absorption and results in an increased electronic temperature and steeper temperature gradient across the GPD channel. This paves the way to compact, on-chip integrated, power-efficient graphene based photodetectors for receivers in tele and datacom modules △ Less

Submitted 11 May, 2019; originally announced May 2019.

Journal ref: Nano Lett 19, 7632 (2019)